ATA_IDENTIFY timed out on ASUS P4VP-MX
Luiz Otavio Souza
luiz at microeletronica.com.br
Mon Feb 7 06:28:32 PST 2005
On Mon, 7 Feb 2005, [ISO-8859-1] Søren Schmidt wrote:
>
> Please try the ATA-mkIII patches+tarfile I announced last week on -current
> and -stable..
>
I tried the patch, and just get a different warning.
i'm attaching two dmesg, one with 5.3-RELEASE (with some extra debug info)
and one for ATA-mIII.
Thanks,
Luiz
-------------- next part --------------
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e8000 len=0000000000018000
SMAP type=01 base=0000000000100000 len=000000000f630000
SMAP type=03 base=000000000f730000 len=0000000000010000
SMAP type=04 base=000000000f740000 len=00000000000b0000
SMAP type=02 base=000000000f7f0000 len=0000000000010000
SMAP type=02 base=00000000ffbc0000 len=0000000000440000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #2: Mon Feb 7 10:50:00 BRST 2005
root@:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2e228.
Table 'FACP' at 0xf730200
Table 'APIC' at 0xf730300
MADT: Found table at 0xf730300
MP Configuration Table version 1.1 found at 0xc00f0f50
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
ACPI APIC Table: <A M I OEMAPIC >
Calibrating clock(s) ... i8254 clock: 1193154 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2264766299 Hz
CPU: Intel(R) Celeron(R) CPU 2.26GHz (2264.77-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf33 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 259194880 (247 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000f2a6fff, 241704960 bytes (59010 pages)
avail memory = 244080640 (232 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f6060
pnpbios: Entry = f0000:6cba Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31481106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f5f60
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 17 C 0x03 3 4 5 7 10 11 14 15
embedded 0 18 A 0x01 3 4 5 7 10 11 14 15
embedded 0 1 A 0x01 3 4 5 7 10 11 14 15
embedded 0 1 B 0x02 3 4 5 7 10 11 14 15
slot 1 0 9 A 0x02 3 4 5 7 10 11 14 15
slot 1 0 9 B 0x03 3 4 5 7 10 11 14 15
slot 1 0 9 C 0x05 3 4 5 7 10 11 14 15
slot 1 0 9 D 0x01 3 4 5 7 10 11 14 15
slot 2 0 10 A 0x03 3 4 5 7 10 11 14 15
slot 2 0 10 B 0x05 3 4 5 7 10 11 14 15
slot 2 0 10 C 0x01 3 4 5 7 10 11 14 15
slot 2 0 10 D 0x02 3 4 5 7 10 11 14 15
slot 3 0 11 A 0x05 3 4 5 7 10 11 14 15
slot 3 0 11 B 0x01 3 4 5 7 10 11 14 15
slot 3 0 11 C 0x02 3 4 5 7 10 11 14 15
slot 3 0 11 D 0x03 3 4 5 7 10 11 14 15
embedded 0 16 A 0x01 3 4 5 7 10 11 14 15
embedded 0 16 B 0x02 3 4 5 7 10 11 14 15
embedded 0 16 C 0x03 3 4 5 7 10 11 14 15
embedded 0 16 D 0x05 3 4 5 7 10 11 14 15
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer: 0/3 0/6 1/2 1/2 1/2 0/4 0/4 0/3 1/2 1/2 -> 5
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 22, enabled
found-> vendor=0x1106, dev=0x3148, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb091, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e480, size 5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000ec00, size 5, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base ffaffc00, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1106, dev=0x3065, revid=0x74
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=23
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe03fffff at device 0.0 on pci0
agp0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 228M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xff800000-0xff9fffff
pcib1: prefetched decode 0xcff00000-0xdfefffff
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base ff980000, size 19, enabled
pcib1: device (null) requested decoded memory range 0xff980000-0xff9fffff
map[14]: type 3, range 32, base d0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd0000000-0xd7ffffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=0x5333, dev=0x8d04, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe480-0xe49f irq 21 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe480
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 21 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xffaffc00-0xffaffcff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:11:2f:dc:f7:ed
vr0: [MPSAFE]
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ahc_isa_probe 14: ioport 0xec00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 a0 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 a0 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2264766299 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ad0: WARNING - SETFEATURES SET TRANSFER MODE requeued due to channel reset
ata0: reinit done ..
ad0: FAILURE - SETFEATURES SET TRANSFER MODE timed out
ad0: FAILURE setting PIO4 on VIA 8235 chip
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ad0: WARNING - SETFEATURES SET TRANSFER MODE requeued due to channel reset
ata0: reinit done ..
ad0: FAILURE - SETFEATURES SET TRANSFER MODE timed out
ad0: timeout state=0 unexpected
ad0: req=0xc16c7e10 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
ad0: req=0xc16c7e10 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
ad0: req=0xc16c7e10 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
ad0: req=0xc16c7e10 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
ad0: req=0xc16c7e10 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
ad0: req=0xc16c7e10 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
ad0: req=0xc16c7e10 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
-------------- next part --------------
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e8000 len=0000000000018000
SMAP type=01 base=0000000000100000 len=000000000f630000
SMAP type=03 base=000000000f730000 len=0000000000010000
SMAP type=04 base=000000000f740000 len=00000000000b0000
SMAP type=02 base=000000000f7f0000 len=0000000000010000
SMAP type=02 base=00000000ffbc0000 len=0000000000440000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #6: Sun Feb 6 13:30:43 BRST 2005
root at flag.fax:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/kernel.generic" at 0xc0a25000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a25224.
link_elf: symbol acpi_pwr_for_sleep_desc undefined
KLD file acpi.ko - could not finalize loading
MP Configuration Table version 1.1 found at 0xc00f0f50
APIC: Using the MPTable enumerator.
MPTable: <TEMPLATE >
Calibrating clock(s) ... i8254 clock: 1193144 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2264762032 Hz
CPU: Intel(R) Celeron(R) CPU 2.26GHz (2264.76-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf33 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 259194880 (247 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000f2a6fff, 241700864 bytes (59009 pages)
avail memory = 244088832 (232 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f6060
pnpbios: Entry = f0000:6cba Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 bus ISA
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: high
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 9 bus ISA
ioapic0: intpin 9 trigger: edge
ioapic0: intpin 9 polarity: high
ioapic0: intpin 12 bus ISA
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 13 bus ISA
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 bus ISA
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
ioapic0: intpin 23 bus ISA
ioapic0: Routing IRQ 11 -> intpin 23
ioapic0: intpin 11 disabled
ioapic0: intpin 23 trigger: level
ioapic0: intpin 23 polarity: low
ioapic0: intpin 16 bus ISA
ioapic0: Routing IRQ 11 -> intpin 16
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 21 bus ISA
ioapic0: Routing IRQ 11 -> intpin 21
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
ioapic0: intpin 21 bus ISA
ioapic0: Routing IRQ 5 -> intpin 21
ioapic0: intpin 5 disabled
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
ioapic0: intpin 21 bus ISA
ioapic0: Routing IRQ 10 -> intpin 21
ioapic0: intpin 10 disabled
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
ata_init
ata_init ok
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31481106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f5f60
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 17 C 0x03 3 4 5 7 10 11 14 15
embedded 0 18 A 0x01 3 4 5 7 10 11 14 15
embedded 0 1 A 0x01 3 4 5 7 10 11 14 15
embedded 0 1 B 0x02 3 4 5 7 10 11 14 15
slot 1 0 9 A 0x02 3 4 5 7 10 11 14 15
slot 1 0 9 B 0x03 3 4 5 7 10 11 14 15
slot 1 0 9 C 0x05 3 4 5 7 10 11 14 15
slot 1 0 9 D 0x01 3 4 5 7 10 11 14 15
slot 2 0 10 A 0x03 3 4 5 7 10 11 14 15
slot 2 0 10 B 0x05 3 4 5 7 10 11 14 15
slot 2 0 10 C 0x01 3 4 5 7 10 11 14 15
slot 2 0 10 D 0x02 3 4 5 7 10 11 14 15
slot 3 0 11 A 0x05 3 4 5 7 10 11 14 15
slot 3 0 11 B 0x01 3 4 5 7 10 11 14 15
slot 3 0 11 C 0x02 3 4 5 7 10 11 14 15
slot 3 0 11 D 0x03 3 4 5 7 10 11 14 15
embedded 0 16 A 0x01 3 4 5 7 10 11 14 15
embedded 0 16 B 0x02 3 4 5 7 10 11 14 15
embedded 0 16 C 0x03 3 4 5 7 10 11 14 15
embedded 0 16 D 0x05 3 4 5 7 10 11 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x3 255 N 5 3 4 5 7 10 11 14 15
0x1 255 N 6 3 4 5 7 10 11 14 15
0x2 255 N 5 3 4 5 7 10 11 14 15
0x5 255 N 4 3 4 5 7 10 11 14 15
$PIR: Found matching pin for 0.18.INTA at func 0: 11
$PIR: Found matching pin for 0.16.INTA at func 0: 11
$PIR: Found matching pin for 0.16.INTB at func 1: 5
$PIR: Found matching pin for 0.16.INTC at func 2: 10
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x3 10 Y 5 3 4 5 7 10 11 14 15
0x1 11 Y 6 3 4 5 7 10 11 14 15
0x2 5 Y 5 3 4 5 7 10 11 14 15
0x5 255 N 4 3 4 5 7 10 11 14 15
$PIR: IRQs used by BIOS: 5 10 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 5 0 0 0 0 5 6 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 22, enabled
found-> vendor=0x1106, dev=0x3148, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb091, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e400, size 5, enabled
interrupt re-route
$PIR: 0:16 INTA routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e480, size 5, enabled
interrupt re-route
$PIR: 0:16 INTB routed to irq 5
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000ec00, size 5, enabled
interrupt re-route
$PIR: 0:16 INTC routed to irq 10
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
interrupt ata_maps
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base ffaffc00, size 8, enabled
interrupt re-route
$PIR: 0:18 INTA routed to irq 11
found-> vendor=0x1106, dev=0x3065, revid=0x74
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe03fffff at device 0.0 on pci0
agp0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 228M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xff800000-0xff9fffff
pcib1: prefetched decode 0xcff00000-0xdfefffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base ff980000, size 19, enabled
pcib1: device (null) requested decoded memory range 0xff980000-0xff9fffff
map[14]: type 3, range 32, base d0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd0000000-0xd7ffffff
interrupt re-route
$PIR: 0:1 INTA routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x5333, dev=0x8d04, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe480-0xe49f irq 5 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe480
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 10 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata_probe
ata_probe
ata_probe ok
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata_attach
ata_attach
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata_attach ok1
ata_probe
ata_probe
ata_probe ok
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata_attach
ata_attach
ata1: reset tp1 mask=03 ostat0=20 ostat1=30
ata1-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata1-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
ata_attach ok1
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xffaffc00-0xffaffcff irq 11 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:11:2f:dc:f7:ed
vr0: [MPSAFE]
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 12 devices, largest 194 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000
PNP0c01: adding fixed memory32 range 0x100000-0xf72ffff, size=0xf630000
PNP0c01: adding fixed memory32 range 0xf730000-0xf73ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xf740000-0xf7effff, size=0xb0000
PNP0c01: adding fixed memory32 range 0xf7f0000-0xf7fffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xffbc0000-0xffffffff, size=0x440000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 4 device ID PNP0b00 (000bd041)
pnpbios: handle 5 device ID PNP0a03 (030ad041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 8 device ID PNP0501 (0105d041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x2e-0x2e, size=0x1, align=0x1
PNP0c02: adding io range 0x2f-0x2f, size=0x1, align=0x1
PNP0c02: adding io range 0x680-0x68f, size=0x10, align=0x1
PNP0c02: adding io range 0x780-0x78f, size=0x10, align=0x1
PNP0c02: adding io range 0x880-0x88f, size=0x10, align=0x1
PNP0c02: adding io range 0x290-0x2cf, size=0x40, align=0x1
pnpbios: handle 9 device ID PNP0c02 (020cd041)
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 11 device ID PNP0303 (0303d041)
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 a0 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 a0 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2264762032 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata_boot_attach
ata_identify
ata_getparam
ata0-master: req=0xc16a3000 ATA_IDENTIFY queued
ata0-master: req=0xc16a3000 ATA_IDENTIFY starting
ata0-master: req=0xc16a3000 ATA_IDENTIFY begin transaction
ata0-master: req=0xc16a3000 ATA_IDENTIFY wait for completition
ata0-master: req=0xc16a3000 ATA_IDENTIFY timeout
ata0-master: req=0xc16a3000 ATA_IDENTIFY end transaction
ata0-master: req=0xc16a3000 ATA_IDENTIFY finish taskqueue_thread
ata0-master: req=0xc16a3000 ATA_IDENTIFY completed entered
ata_reinit
ata_reinit
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: resetting done ..
ata_identify
ata_getparam
ata0-master: req=0xc16a2e10 ATA_IDENTIFY begin transaction
ata0-master: req=0xc16a2e10 ATA_IDENTIFY wait for completition
ata0-master: req=0xc16a2e10 ATA_IDENTIFY timeout
ata0-master: req=0xc16a2e10 ATA_IDENTIFY end transaction
ata0-master: req=0xc16a2e10 ATA_IDENTIFY finish directly
ata0-master: req=0xc16a2e10 ATA_IDENTIFY completed entered
ata_reinit
ata_reinit
ata0: reiniting channel ..
ata0-master: FAILURE - ATA_IDENTIFY timed out
ata0-master: req=0xc16a2e10 ATA_IDENTIFY completed callback/wakeup
ata0-master: req=0xc16a2e10 ATA_IDENTIFY begin transaction
ata0-master: req=0xc16a2e10 ATA_IDENTIFY wait for completition
ata0-master: req=0xc16a2e10 ATA_IDENTIFY timeout
ata0-master: req=0xc16a2e10 ATA_IDENTIFY end transaction
ata0-master: req=0xc16a2e10 ATA_IDENTIFY finish directly
ata0-master: req=0xc16a2e10 ATA_IDENTIFY completed entered
ata_reinit
ata_reinit
ata0: reiniting channel ..
ata0-master: FAILURE - ATA_IDENTIFY timed out
ata0-master: req=0xc16a2e10 ATA_IDENTIFY completed callback/wakeup
ata_getparam ok
ata_identify ok
ata0: device config done ..
ata_reinit ok
ata0-master: FAILURE - ATA_IDENTIFY timed out
ata0-master: req=0xc16a3000 ATA_IDENTIFY completed callback/wakeup
ata0-master: req=0xc16a3000 ATA_IDENTIFY queued
ata0-master: req=0xc16a3000 ATA_IDENTIFY starting
ata0-master: req=0xc16a3000 ATA_IDENTIFY finish taskqueue_thread
ata0-master: req=0xc16a3000 ATA_IDENTIFY wait for completition
ata0-master: req=0xc16a3000 ATA_IDENTIFY completed entered
ata0-master: req=0xc16a3000 ATA_IDENTIFY completed callback/wakeup
ata_getparam ok
ata_identify ok
ata_identify
ata_identify ok
ata_boot_attach ok
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 21 (ISA IRQ 10) to cluster 0
Mounting root from ufs:/dev/ad0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
panic: Root mount failed, startup aborted.
Uptime: 25s
ata_shutdown
ata_shutdown ok
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
More information about the freebsd-hackers
mailing list