From aragon at phat.za.net Tue Sep 1 13:01:31 2009 From: aragon at phat.za.net (Aragon Gouveia) Date: Tue Sep 1 13:01:41 2009 Subject: FreeBSD Port: security/nss In-Reply-To: <4A996034.2000205@jaggeri.com> References: <4A996034.2000205@jaggeri.com> Message-ID: <4A9D1704.1000200@phat.za.net> Hey Ajay, You've probably seen my PR by now, but in case not: http://www.freebsd.org/cgi/query-pr.cgi?pr=138419 Please test this if you have time. It needs to be tested with other apps that link to NSS to ensure the new version doesn't break its dependants. Testing on other platforms would be good too. Thanks, Aragon Sprewell wrote: > Hello, I'm writing to find out the status of NSS, if an upgrade to 3.12 > is due anytime soon. I'm asking because a FreeBSD port of Chromium is > underway (http://codereview.chromium.org/172032) but Chromium requires > at least NSS 3.12. Please let me know what the status of a 3.12 port > might be, as I'd like to pitch in to make that happen. Thanks. > > Ajay > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" From oberman at es.net Tue Sep 1 16:22:32 2009 From: oberman at es.net (Kevin Oberman) Date: Tue Sep 1 16:22:38 2009 Subject: screensaver still broken... In-Reply-To: Your message of "Fri, 21 Aug 2009 16:43:45 EDT." <4A8F0701.8040206@freebsd.org> Message-ID: <20090901162221.3CE8B1CC0E@ptavv.es.net> > Date: Fri, 21 Aug 2009 16:43:45 -0400 > From: Joe Marcus Clarke > Sender: owner-freebsd-gnome@freebsd.org > > Mike Harding wrote: > > I still have issues where a screen lock won't let me type in my > > password, have to kill it from a console. Also, the LCD backlight for > > my desktop machine doesn't turn off... something in GNOME turns off > > the power saving in X. > > > > Does these lines in ~/.xsession-errors about org.gnome.ScreenSaver > > mean anything? > > No. Everyone sees them. I cannot reproduce the gnome-screensaver > problems on any of my machines. And I don't have a machine with fully > working power management to test backlight stuff. I don't have any > suggestions, either because I have not seen these problems. Maybe some > of the upstream GNOME people have some ideas of things to try. > > Joe Problem seems to be resolved. I have now tried all three of my systems running a Gnome desktop and it now seems to be working on all of them. It want away when I updated ports on Monday. I suspect, but can't confirm, that libxlavier was the culprit. Out of curiosity, Mike, did you have any special keyboard mapping stuff in you Gnome configuration? I use "Make CapsLock an additional Ctrl" and I suspect that this may be what is different about my configurations. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From mvh at ix.netcom.com Wed Sep 2 14:27:16 2009 From: mvh at ix.netcom.com (Mike Harding) Date: Wed Sep 2 14:27:22 2009 Subject: screensaver still broken... In-Reply-To: <20090901162221.3CE8B1CC0E@ptavv.es.net> (oberman@es.net) References: <20090901162221.3CE8B1CC0E@ptavv.es.net> Message-ID: <20090902142712.3B3E017B7D@bsd.mvh> Yep, it's working for me too now (the screen lock, not the backlight). I don't recall making any changes to the gnome configuration, and I certainly did not make any CapsLock changes. Anyway, glad to see it working! - Mike H From edwin at FreeBSD.org Thu Sep 3 04:00:27 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Thu Sep 3 04:00:38 2009 Subject: ports/138493: devel/nspr: add regression-test target Message-ID: <200909030400.n8340QaS066189@freefall.freebsd.org> Synopsis: devel/nspr: add regression-test target Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Thu Sep 3 04:00:26 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=138493 From harry at segon.net Fri Sep 4 14:28:09 2009 From: harry at segon.net (SEGON USB Flash Drive) Date: Fri Sep 4 14:28:18 2009 Subject: Update Offer SEGON USB Flash Drive freebsd-gnome@freebsd.org Message-ID: <882001ca2d6b$e4b9e8a0$ae2db9e0$@net> TO freebsd-gnome@freebsd.org If you wish to receive immediate feedback or regular offering, please add my msn : harry@segon.net to become member of receiving update of market fluctuation. Download SEGON COMPANY PROFILE: http://www.segon.net/en/images/oem/SEGON%20Company%20Profile.pdf Offer 2GB OEM USB Flash drive: Download link for OEM Pendrive :http://www.segon.net/en/oem.asp at USD 5.4 (Call for price fluctuation£© in bulk based on 5000 Pcs ( Add USD 0.5 for Banana and Monkey USB Flash Drive) Great Offer for 4GB/8GB USB Flash Drive Download link Picture : http://www.segon.net/Aluminum%20Long.JPG at USD 7 /12 (Call for price fluctuation£© based on 5000 Pcs percapacity Delivery : FOB HK Payment term : T/T in advance ( above USD 50,000 : 30 % down payment 70 % Before shipment) Leadtime : 2-3 days after payment received and art work file confirmed. Packing : Retail = USD 0.1/Pcs Other competitive price for product list as below 1. Call to supply for Generic Printing(OEM) Bulk Micro SD(TF Card) 1GB/2GB/4GB/8GB/16GB SMI+SAM 4GB/8GB/16GB are Micro SDHC class 6 with CPRM 2. Call to supply for Generic Printing(OEM) Bulk SD Card 1GB/2GB/4GB/8GB/16 GB SMI+SAM 4GB/8GB/16GB are SDHC class 6 with CPRM 3. Call to supply Generic M2 Memory card in bulk(with Sony Brand printed) 4. Kingston OEM DT101 2GB/4GB in bulk. With Kingston Logo on it. More Capacity applicable. For OEM market(Not original Kingston, but quality is 99% Original) .Available Retail Packing on separate. 5. Call for UPD COB Memory Stick 1GB/2GB/4GB/8GB/16GB SMI +SAM /UT165+SAM 6. Various Form type Micro SD or M2 Card Reader or Dual. 7. SEGON branded various innovative type of USB Flash Drive(Turbo,G1, Ceramic, Bees, Stride Forward, Speed, Coin Hard drive, Chocolate, Key, Sailing) 2GB/4GB/8GB/16GB 1. Various OEM USB Flash Drive , please visit : http://www.segon.net/en/oem.asp (Please state whether you need in bulk or in Retail Packing) . Customize Logo available for quantity start from 3000 Pcs . Less then required quantity, required deposit USD 350 . The deposit is refundable for purchasing 3000 Pcs within 3 months. Otherwise OEM product are only available in Generic(Plain) printed. (Above offer for 2GB) Please request by return should you need EDM spec in Generic format. Should you need price list, please provide your company full details with distribution plan(Quantity, capacity monthly , etc..) Note: Free sample is not available. Please give us a list of sample purchase(Model with quantity and capacity of each) for furthers sample quotation. SEGON ±íî^.jpg Best Regards Harry SALES MANAGER Segon Technology Co.,Ltd Address: 12F,10,No.866 , JhongJheng Road., Jhonghe City ,Taipei County 235 , Taiwan TEL:+886-2-2221-6689 FAX:+886-2-2221-8990 Email 1: harry@segon.net Email 2: sales1@segon.net Website: www.segon.net msn: harry@segon.net skypeID: harrysegon Yahoo Messenger: harrysegon From harry at segon.net Sun Sep 6 02:14:50 2009 From: harry at segon.net (SEGON USB Flash Drive) Date: Sun Sep 6 02:14:59 2009 Subject: Update Offer SEGON USB Flash Drive freebsd-gnome@freebsd.org Message-ID: Attn: freebsd-gnome@freebsd.org If you wish to receive immediate feedback or regular offering, please add my msn : harry@segon.net to become member of receiving update of market fluctuation. Download SEGON COMPANY PROFILE: http://www.segon.net/en/images/oem/SEGON%20Company%20Profile.pdf Offer 2GB OEM USB Flash drive: Download link for OEM Pendrive : http://www.segon.net/en/oem.asp at USD 5.4 (Call for price fluctuation? in bulk based on 5000 Pcs ( Add USD 0.5 for Banana and Monkey USB Flash Drive) Great Offer for 4GB/8GB USB Flash Drive Download link Picture : http://www.segon.net/Aluminum%20Long.JPG at USD 7 /12 (Call for price fluctuation? based on 5000 Pcs percapacity Delivery : FOB HK Payment term : T/T in advance ( above USD 50,000 : 30 % down payment 70 % Before shipment) Leadtime : 2-3 days after payment received and art work file confirmed. Packing : Retail = USD 0.1/Pcs Other competitive price for product list as below 1. Call to supply for Generic Printing(OEM) Bulk Micro SD(TF Card) 1GB/2GB/4GB/8GB/16GB SMI+SAM 4GB/8GB/16GB are Micro SDHC class 6 with CPRM 2. Call to supply for Generic Printing(OEM) Bulk SD Card 1GB/2GB/4GB/8GB/16 GB SMI+SAM 4GB/8GB/16GB are SDHC class 6 with CPRM 3. Call to supply Generic M2 Memory card in bulk(with Sony Brand printed) 4. Kingston OEM DT101 2GB/4GB in bulk. With Kingston Logo on it. More Capacity applicable. For OEM market(Not original Kingston, but quality is 99% Original) .Available Retail Packing on separate. 5. Call for UPD COB Memory Stick 1GB/2GB/4GB/8GB/16GB SMI +SAM /UT165+SAM 6. Various Form type Micro SD or M2 Card Reader or Dual. 7. SEGON branded various innovative type of USB Flash Drive(Turbo,G1, Ceramic, Bees, Stride Forward, Speed, Coin Hard drive, Chocolate, Key, Sailing) 2GB/4GB/8GB/16GB 8. Various OEM USB Flash Drive , please visit : http://www.segon.net/en/oem.asp (Please state whether you need in bulk or in Retail Packing) . Customize Logo available for quantity start from 3000 Pcs . Less then required quantity, required deposit USD 350 . The deposit is refundable for purchasing 3000 Pcs within 3 months. Otherwise OEM product are only available in Generic(Plain) printed. (Above offer for 2GB) Please request by return should you need EDM spec in Generic format. Should you need price list, please provide your company full details with distribution plan(Quantity, capacity monthly , etc..) Note: Free sample is not available. Please give us a list of sample purchase(Model with quantity and capacity of each) for furthers sample quotation. Best Regards Harry SALES MANAGER Segon Technology Co.,Ltd Address: 12F,10,No.866 , JhongJheng Road., Jhonghe City ,Taipei County 235 , Taiwan TEL: +886-2-2221-6689 FAX:+886-2-2221-8990 Email 1: harry@segon.net Email 2: sales1@segon.net Website: www.segon.net msn: harry@segon.net skypeID: harrysegon Yahoo Messenger: harrysegon From edwin at FreeBSD.org Sun Sep 6 06:20:12 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sun Sep 6 06:20:23 2009 Subject: ports/138564: x11-fonts/bitstream-vera missing mtree Message-ID: <200909060620.n866KBVG092447@freefall.freebsd.org> Synopsis: x11-fonts/bitstream-vera missing mtree Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Sun Sep 6 06:20:11 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=138564 From edwin at FreeBSD.org Sun Sep 6 09:40:16 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sun Sep 6 09:40:29 2009 Subject: ports/138569: x11-fonts/bitstream-vera require BSD.x11-4.dist which was deleted Message-ID: <200909060940.n869eGGh029843@freefall.freebsd.org> Synopsis: x11-fonts/bitstream-vera require BSD.x11-4.dist which was deleted Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Sun Sep 6 09:40:15 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=138569 From elgrifoad at gmail.com Sun Sep 6 09:44:56 2009 From: elgrifoad at gmail.com (Chen Vincent) Date: Sun Sep 6 09:45:04 2009 Subject: devel/py-orbit make err Message-ID: checking whether /usr/local/bin/python2.6 version >= 2.4... yes checking for /usr/local/bin/python2.6 version... 2.6 checking for /usr/local/bin/python2.6 platform... freebsd7 checking for /usr/local/bin/python2.6 script directory... ${prefix}/lib/python2.6/site-packages checking for /usr/local/bin/python2.6 extension module directory... ${exec_prefix}/lib/python2.6/site-packages checking for headers required to compile python extensions... found checking for python libraries... not found configure: error: could not find Python headers ===> Script "configure" failed unexpectedly. Please run the gnomelogalyzer, available from "http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will diagnose the problem and suggest a solution. If - and only if - the gnomelogalyzer cannot solve the problem, report the build failure to the FreeBSD GNOME team at gnome@FreeBSD.org, and attach (a) "/usr/ports/devel/py-orbit/work/pyorbit-2.24.0/config.log", (b) the output of the failed make command, and (c) the gnomelogalyzer output. Also, it might be a good idea to provide an overview of all packages installed on your system (i.e. an `ls /var/db/pkg`). Put your attachment up on any website, copy-and-paste into http://freebsd-gnome.pastebin.com, or use send-pr(1) with the attachment. Try to avoid sending any attachments to the mailing list (gnome@FreeBSD.org), because attachments sent to FreeBSD mailing lists are usually discarded by the mailing list software. *** Error code 1 Stop in /usr/ports/devel/py-orbit. -------------- next part -------------- A non-text attachment was scrubbed... Name: config.log Type: application/octet-stream Size: 30049 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090906/e6b8c7bf/config.obj From kwm at FreeBSD.org Sun Sep 6 09:54:33 2009 From: kwm at FreeBSD.org (kwm@FreeBSD.org) Date: Sun Sep 6 09:54:39 2009 Subject: ports/138569: x11-fonts/bitstream-vera require BSD.x11-4.dist which was deleted Message-ID: <200909060954.n869sWM7047679@freefall.freebsd.org> Synopsis: x11-fonts/bitstream-vera require BSD.x11-4.dist which was deleted State-Changed-From-To: open->closed State-Changed-By: kwm State-Changed-When: Sun Sep 6 09:53:41 UTC 2009 State-Changed-Why: Duplicate of ports/138564. Thanks for the report! http://www.freebsd.org/cgi/query-pr.cgi?pr=138569 From linimon at FreeBSD.org Sun Sep 6 22:01:31 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Sun Sep 6 22:01:43 2009 Subject: ports/138582: x11-toolkits/py-gtk2 fails to build while upgrading ports Message-ID: <200909062201.n86M1Udh087110@freefall.freebsd.org> Old Synopsis: py-gtk2 fails to build while upgrading ports New Synopsis: x11-toolkits/py-gtk2 fails to build while upgrading ports Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: linimon Responsible-Changed-When: Sun Sep 6 22:01:15 UTC 2009 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=138582 From linimon at FreeBSD.org Mon Sep 7 06:28:29 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Mon Sep 7 06:28:35 2009 Subject: FreeBSD ports that you maintain which are currently marked broken Message-ID: <20090907062828.128221CC96@mail.droso.net> Dear FreeBSD port maintainer: As part of an ongoing effort to reduce the number of problems in the FreeBSD ports system, we periodically notify users of ports that are marked as "broken" in their Makefiles. In many cases these ports are failing to compile on some subset of the FreeBSD build environments. The most common problem is that recent versions of -CURRENT include gcc4.2, which is much stricter than older versions. The next most common problem is that compiles succeed on the i386 architecture (e.g. the common Intel PC), but fail on one or more of the other architectures due to assumptions about things such as size of various types, byte-alignment issues, and so forth. In occasional cases we see that the same port may have different errors in different build environments. The script that runs on the build cluster uses heuristics to try to 'guess' the error type to help you isolate problems, but it is only a rough guide. One more note: on occasion, there are transient build errors seen on the build farm. Unfortunately, there is not yet any way for this algorithm to tell the difference (humans are much, much better at this kind of thing.) The errors are listed below. In the case where the same problem exists on more than one build environment, the URL points to the latest errorlog for that type. (By 'build environment' here we mean 'combination of 6.x/7.x/-current with target architecture'.) (Note: the dates are included to help you to gauge whether or not the error still applies to the latest version. The program that generates this report is not yet able to determine this automatically.) portname: databases/libgda4-jdbc broken because: does not configure build errors: none. overview: http://portsmon.FreeBSD.org/portoverview.py?category=databases&portname=libgda4-jdbc If these errors are ones that you are already aware of, please accept our apologies and ignore this message. On the other hand, if you no longer wish to maintain this port (or ports), please reply with a message stating that, and accept our thanks for your efforts in the past. Every effort has been made to make sure that these error reports really do correspond to a port that you maintain. However, due to the fact that this is an automated process, it may indeed generate false matches. If one of these errors fits that description, please forward this email to the author of this software, Mark Linimon , so that he can attempt to fix the problem in the future. Thanks for your efforts to help improve FreeBSD. From bland at FreeBSD.org Mon Sep 7 08:00:32 2009 From: bland at FreeBSD.org (bland@FreeBSD.org) Date: Mon Sep 7 08:01:05 2009 Subject: ports/138582: x11-toolkits/py-gtk2 fails to build while upgrading ports Message-ID: <200909070800.n8780WcS018313@freefall.freebsd.org> Synopsis: x11-toolkits/py-gtk2 fails to build while upgrading ports State-Changed-From-To: open->closed State-Changed-By: bland State-Changed-When: Mon Sep 7 07:59:08 UTC 2009 State-Changed-Why: It's time to upgrade your Pyhton. Please follow the instructions in /usr/ports/UPDATING. http://www.freebsd.org/cgi/query-pr.cgi?pr=138582 From bugmaster at FreeBSD.org Mon Sep 7 11:07:21 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Sep 7 11:10:23 2009 Subject: Current problem reports assigned to gnome@FreeBSD.org Message-ID: <200909071107.n87B7Kor010605@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/138564 gnome x11-fonts/bitstream-vera missing mtree o ports/138493 gnome devel/nspr: add regression-test target o ports/138419 gnome [patch] security/nss version upgrade f ports/138330 gnome x11/gnome2: in freebsd 8.0 beta3, hald segfaults withi o ports/138312 gnome [PATCH]textproc/link-grammar: update to 4.5.10 f ports/137368 gnome x11-toolkits/libwnck: add menu option to configure dep s ports/137367 gnome net/libproxy: add menu option to configure dependence s ports/136967 gnome security/seahorse-plugins 2.26.2_1 + GPG = fail p ports/136676 gnome x11/gnome2: hald/GNOME (I guess) (re) mounted /usr and f ports/136435 gnome security/gnome-keyring + hald prevents umount of usb d p ports/134737 gnome Update www/webkit-gtk2 to 1.1.7 f ports/134536 gnome [patch] graphics/gimp: Gimp 2.6.6 fails to open URI's o ports/134509 gnome graphics/inkscape: after loading any type of data file a ports/134361 gnome devel/gvfs ports with smbclient support doesn't pass a f ports/134358 gnome x11/gnome2: trackerd uses up all of the cpu o ports/132304 gnome ports/devel/dbus misses /var/db/dbus/machine-id in dis 16 problems total. From gulanito at gmail.com Tue Sep 8 02:34:15 2009 From: gulanito at gmail.com (gula nito) Date: Tue Sep 8 02:34:22 2009 Subject: brasero,dvdrw and libburn Message-ID: Hi. I need to activate the libburn backend in brasero cause I need support for DVD-RW. (I have support for CD,CDRW and DVD, but a DVD-RW is not recognized by brasero. I read http://forums.freebsd.org/archive/index.php/t-3586.html and the cause of that problem seems to be that whit the default backend there aren't DVDRW support). I was compiled brasero from ports yesterday whit the libburnia option activated, but in the gconf-editor I can't see the lbburn_iso nor the libburn_burn keys for activate it. Thanks in advance. Gula From bobf at mrp3.com Tue Sep 8 07:48:58 2009 From: bobf at mrp3.com (Bob Frazier) Date: Tue Sep 8 07:49:04 2009 Subject: ports/136435: security/gnome-keyring + hald prevents umount of usb drive without '-f' In-Reply-To: References: <200907081758.n68HwoQP037875@freefall.freebsd.org> Message-ID: <4AA60D98.6020702@mrp3.com> upgraded ports as of last Friday (cvsup to '.'). Problem remains. followup submitted to PR - latest cvsup of ports, problem remains, may not be gnome-keyring but possibly 'mountd' (see followup, output of lshal attached to followup e-mail). on a related note, portupgrade went without major glitches, thanks - I normally reserve 3 or 4 'days off' to upgrade my work laptop due to frequent past gnome upgrade issues that would sometimes take days to fix, and render the GUI more or less unusable until fixed. last 2 upgrades didn't have any major compile/install problems, and of course enabling multi-job helps a _LOT_ to cut down on the time requirement. From bobf at mrp3.com Tue Sep 8 07:50:02 2009 From: bobf at mrp3.com (Bob Frazier) Date: Tue Sep 8 07:50:11 2009 Subject: ports/136435: security/gnome-keyring + hald prevents umount of usb drive without '-f' Message-ID: <200909080750.n887o2I9098879@freefall.freebsd.org> The following reply was made to PR ports/136435; it has been noted by GNATS. From: Bob Frazier To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/136435: security/gnome-keyring + hald prevents umount of usb drive without '-f' Date: Tue, 08 Sep 2009 00:41:40 -0700 This is a multi-part message in MIME format. --------------050906080001080500000303 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit problem still reproducible using latest ports as of 9/6/2009 (portupgrade -a successful for relevant ports) output of lshal attached as 'lshal.txt' mount sequence demonstrating problem: BSDSilver/root# mount /ramstick 0:34:56 Tue 09/08/2009 BSDSilver/root# mount 0:35:01 Tue 09/08/2009 /dev/ad4s1a on / (ufs, local) devfs on /dev (devfs, local) /dev/ad4s1e on /tmp (ufs, local, soft-updates) /dev/ad4s1f on /usr (ufs, NFS exported, local, soft-updates) /dev/ad4s1d on /var (ufs, local, soft-updates) linprocfs on /usr/compat/linux/proc (linprocfs, local) /dev/da0s1 on /ramstick (msdosfs, local) BSDSilver/root# umount /ramstick 0:35:02 Tue 09/08/2009 umount: unmount of /ramstick failed: Device busy BSDSilver/root# umount -f /ramstick 0:35:07 Tue 09/08/2009 BSDSilver/root# mount 0:35:10 Tue 09/08/2009 /dev/ad4s1a on / (ufs, local) devfs on /dev (devfs, local) /dev/ad4s1e on /tmp (ufs, local, soft-updates) /dev/ad4s1f on /usr (ufs, NFS exported, local, soft-updates) /dev/ad4s1d on /var (ufs, local, soft-updates) linprocfs on /usr/compat/linux/proc (linprocfs, local) BSDSilver/root# 0:35:12 Tue 09/08/2009 /var/log/messages entries Sep 8 00:34:54 BSDSilver kernel: GEOM_LABEL: Label for provider da0s1 is msdosfs/Lexar. Sep 8 00:34:59 BSDSilver kernel: GEOM_LABEL: Label msdosfs/Lexar removed. Sep 8 00:35:01 BSDSilver mountd[651]: unknown user: 65535 Sep 8 00:35:10 BSDSilver kernel: GEOM_LABEL: Label for provider da0s1 is msdosfs/Lexar. note: at this time previous messages implicating gnome-keyring are not present in 'messages', recommend re-classifying bug as to actual subsystem (hald? mountd?). also 'mountd' error 'unknown user' was not observed before. --------------050906080001080500000303 Content-Type: text/plain; name="lshal.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="lshal.txt" Dumping 89 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_to_disk = true (bool) power_management.can_suspend_to_ram = true (bool) power_management.is_powersave_set = false (bool) power_management.type = 'acpi' (string) system.chassis.manufacturer = 'Hewlett-Packard' (string) system.chassis.type = 'Notebook' (string) system.firmware.release_date = '12/04/2008' (string) system.firmware.vendor = 'Hewlett-Packard' (string) system.firmware.version = 'F.35' (string) system.formfactor = 'laptop' (string) system.hardware.product = 'HP Pavilion dv7 Notebook PC' (string) system.hardware.serial = 'CND8511QDM' (string) system.hardware.uuid = '48EFFD47-CB03-11DD-9C59-001EECFEDF1A' (string) system.hardware.vendor = 'Hewlett-Packard' (string) system.hardware.version = '1' (string) system.kernel.machine = 'amd64' (string) system.kernel.name = 'FreeBSD' (string) system.kernel.version = '7.2-STABLE' (string) system.product = 'HP Pavilion dv7 Notebook PC 1' (string) udi = '/org/freedesktop/Hal/devices/acpi_acad_0' ac_adapter.present = false (bool) freebsd.driver = 'acpi_acad' (string) freebsd.unit = 0 (0x0) (int) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AC Adapter' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_acad_0' (string) platform.id = 'acpi_acad.0' (string) pnp.id = 'ACPI0003' (string) udi = '/org/freedesktop/Hal/devices/acpi_button_0' button.type = 'power' (string) freebsd.driver = 'acpi_button' (string) freebsd.unit = 0 (0x0) (int) info.capabilities = {'button'} (string list) info.category = 'button' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_button_0' (string) platform.id = 'acpi_button.0' (string) pnp.description = 'ACPI power button device' (string) pnp.id = 'PNP0C0C' (string) udi = '/org/freedesktop/Hal/devices/acpi_lid_0' button.has_state = true (bool) button.state.value = false (bool) button.type = 'lid' (string) freebsd.driver = 'acpi_lid' (string) freebsd.unit = 0 (0x0) (int) info.ignore = true (bool) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Ignored Device' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/ignored-device' (string) platform.id = 'acpi_lid.0' (string) pnp.description = 'ACPI lid device' (string) pnp.id = 'PNP0C0D' (string) udi = '/org/freedesktop/Hal/devices/acpi_tz_0' freebsd.driver = 'acpi_tz' (string) freebsd.unit = 0 (0x0) (int) info.capabilities = {'sensor'} (string list) info.category = 'sensor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Thermal Zone' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_tz_0' (string) platform.id = 'acpi_tz.0' (string) sensor.location = 'cpu' (string) sensor.type = 'temperature' (string) udi = '/org/freedesktop/Hal/devices/battery_0' battery.charge_level.current = 52690 (0xcdd2) (int) battery.charge_level.design = 73440 (0x11ee0) (int) battery.charge_level.granularity_1 = 3802 (0xeda) (int) battery.charge_level.granularity_2 = 54432 (0xd4a0) (int) battery.charge_level.last_full = 70675 (0x11413) (int) battery.charge_level.low = 6221 (0x184d) (int) battery.charge_level.percentage = 74 (0x4a) (int) battery.charge_level.rate = 0 (0x0) (int) battery.charge_level.unit = 'mWh' (string) battery.charge_level.warning = 10368 (0x2880) (int) battery.is_rechargeable = true (bool) battery.model = 'Primary' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = true (bool) battery.remaining_time = 5002 (0x138a) (int) battery.reporting.current = 3659 (0xe4b) (int) battery.reporting.design = 5100 (0x13ec) (int) battery.reporting.last_full = 4908 (0x132c) (int) battery.reporting.low = 432 (0x1b0) (int) battery.reporting.rate = 0 (0x0) (int) battery.reporting.units = 'mAh' (string) battery.reporting.warning = 720 (0x2d0) (int) battery.serial = '' (string) battery.technology = 'Lion' (string) battery.type = 'primary' (string) battery.vendor = 'Hewlett-Packard' (string) battery.voltage.current = 15288 (0x3bb8) (int) battery.voltage.design = 14400 (0x3840) (int) battery.voltage.unit = 'mV' (string) freebsd.driver = 'battery' (string) freebsd.unit = 0 (0x0) (int) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ACPI Control Method Battery' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/battery_0' (string) info.vendor = 'Hewlett-Packard' (string) platform.id = 'battery.0' (string) pnp.description = 'ACPI Control Method Battery' (string) pnp.id = 'PNP0C0A' (string) udi = '/org/freedesktop/Hal/devices/cpu_0' freebsd.driver = 'cpu' (string) freebsd.unit = 0 (0x0) (int) info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ACPI CPU' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/cpu_0' (string) platform.id = 'cpu.0' (string) processor.can_throttle = true (bool) processor.maximum_speed = 2100 (0x834) (int) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/cpu_1' freebsd.driver = 'cpu' (string) freebsd.unit = 1 (0x1) (int) info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ACPI CPU' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/cpu_1' (string) platform.id = 'cpu.1' (string) processor.can_throttle = true (bool) processor.maximum_speed = 2100 (0x834) (int) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/atkbdc_0' freebsd.driver = 'atkbdc' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Keyboard controller (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/atkbdc_0' (string) platform.id = 'atkbdc.0' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/atkbd_0' freebsd.device_file = '/dev/atkbd0' (string) freebsd.driver = 'atkbd' (string) freebsd.unit = 0 (0x0) (int) info.capabilities = {'input', 'input.keyboard'} (string list) info.category = 'input.keyboard' (string) info.parent = '/org/freedesktop/Hal/devices/atkbdc_0' (string) info.product = 'AT Keyboard' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/atkbd_0' (string) input.device = '' (string) input.x11_driver = 'kbd' (string) platform.id = 'atkbd.0' (string) udi = '/org/freedesktop/Hal/devices/psm_0' freebsd.device_file = '/dev/psm0' (string) freebsd.driver = 'psm' (string) freebsd.unit = 0 (0x0) (int) info.addons = {'hald-addon-mouse-sysmouse'} (string list) info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input.mouse' (string) info.parent = '/org/freedesktop/Hal/devices/atkbdc_0' (string) info.product = 'PS/2 Mouse' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/psm_0' (string) input.device = '/dev/sysmouse' (string) input.x11_driver = 'mouse' (string) platform.id = 'psm.0' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_9600' freebsd.driver = 'hostb' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 Host Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9600' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'RS780 Host Bridge' (string) pci.product_id = 38400 (0x9600) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_103c_9602' freebsd.driver = 'pcib' (string) freebsd.unit = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_103c_9602' (string) info.vendor = 'Hewlett-Packard Company' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 1 (0x1) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 1 (0x1) (int) pci.product_id = 38402 (0x9602) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Hewlett-Packard Company' (string) pci.vendor_id = 4156 (0x103c) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_9612' freebsd.driver = 'vgapci' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/pci_103c_9602' (string) info.product = 'RS780M/RS780MN [Radeon HD 3200 Graphics]' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_9612' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 1 (0x1) (int) pci.freebsd.device = 5 (0x5) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'RS780M/RS780MN [Radeon HD 3200 Graphics]' (string) pci.product_id = 38418 (0x9612) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/drm_0' freebsd.driver = 'drm' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1002_9612' (string) info.product = 'ATI Radeon HD 3200 Graphics' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/drm_0' (string) platform.id = 'drm.0' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_960f' freebsd.driver = 'hdac' (string) freebsd.unit = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/pci_103c_9602' (string) info.product = 'RS780 Azalia controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_960f' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 1 (0x1) (int) pci.freebsd.device = 5 (0x5) (int) pci.freebsd.function = 1 (0x1) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'RS780 Azalia controller' (string) pci.product_id = 38415 (0x960f) (int) pci.subsys_product_id = 38415 (0x960f) (int) pci.subsys_vendor = 'ATI Technologies Inc' (string) pci.subsys_vendor_id = 4098 (0x1002) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pcm_3' freebsd.driver = 'pcm' (string) freebsd.unit = 3 (0x3) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1002_960f' (string) info.product = 'HDA ATI RS690/780 HDMI PCM #0 Digital' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_3' (string) platform.id = 'pcm.3' (string) udi = '/org/freedesktop/Hal/devices/pcm_3_oss_mixer_3' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_3' (string) info.product = 'HDA ATI RS690/780 HDMI PCM #0 Digital (mixer)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_3_oss_mixer_3' (string) oss.card = 3 (0x3) (int) oss.card_id = 'snd_hda [MPSAFE] (1p:1v/0r:0v channels)' (string) oss.device = 3 (0x3) (int) oss.device_file = '/dev/mixer3' (string) oss.device_id = 'HDA ATI RS690/780 HDMI PCM #0 Digital (mixer)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_3' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pcm_3_oss_pcm_3' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_3' (string) info.product = 'HDA ATI RS690/780 HDMI PCM #0 Digital (pcm)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_3_oss_pcm_3' (string) oss.card = 3 (0x3) (int) oss.card_id = 'snd_hda [MPSAFE] (1p:1v/0r:0v channels)' (string) oss.device = 3 (0x3) (int) oss.device_file = '/dev/dsp3' (string) oss.device_id = 'HDA ATI RS690/780 HDMI PCM #0 Digital (pcm)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_3' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_9604' freebsd.driver = 'pcib' (string) freebsd.unit = 2 (0x2) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (PCIE port 0)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9604' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 4 (0x4) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 2 (0x2) (int) pci.product = 'RS780 PCI to PCI bridge (PCIE port 0)' (string) pci.product_id = 38404 (0x9604) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_9605' freebsd.driver = 'pcib' (string) freebsd.unit = 3 (0x3) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (PCIE port 1)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9605' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 5 (0x5) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 8 (0x8) (int) pci.product = 'RS780 PCI to PCI bridge (PCIE port 1)' (string) pci.product_id = 38405 (0x9605) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_197b_2382' info.parent = '/org/freedesktop/Hal/devices/pci_1022_9605' (string) info.product = 'SD/MMC Host Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_197b_2382' (string) info.vendor = 'JMicron Technology Corp.' (string) pci.device_class = 8 (0x8) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.freebsd.bus = 8 (0x8) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SD/MMC Host Controller' (string) pci.product_id = 9090 (0x2382) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'JMicron Technology Corp.' (string) pci.vendor_id = 6523 (0x197b) (int) udi = '/org/freedesktop/Hal/devices/pci_197b_2381' info.parent = '/org/freedesktop/Hal/devices/pci_1022_9605' (string) info.product = 'Standard SD Host Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_197b_2381' (string) info.vendor = 'JMicron Technology Corp.' (string) pci.device_class = 8 (0x8) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 5 (0x5) (int) pci.freebsd.bus = 8 (0x8) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 2 (0x2) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'Standard SD Host Controller' (string) pci.product_id = 9089 (0x2381) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'JMicron Technology Corp.' (string) pci.vendor_id = 6523 (0x197b) (int) udi = '/org/freedesktop/Hal/devices/pci_197b_2383' info.parent = '/org/freedesktop/Hal/devices/pci_1022_9605' (string) info.product = 'MS Host Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_197b_2383' (string) info.vendor = 'JMicron Technology Corp.' (string) pci.device_class = 8 (0x8) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.freebsd.bus = 8 (0x8) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 3 (0x3) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'MS Host Controller' (string) pci.product_id = 9091 (0x2383) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'JMicron Technology Corp.' (string) pci.vendor_id = 6523 (0x197b) (int) udi = '/org/freedesktop/Hal/devices/pci_197b_2384' info.parent = '/org/freedesktop/Hal/devices/pci_1022_9605' (string) info.product = 'xD Host Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_197b_2384' (string) info.vendor = 'JMicron Technology Corp.' (string) pci.device_class = 8 (0x8) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.freebsd.bus = 8 (0x8) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 4 (0x4) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'xD Host Controller' (string) pci.product_id = 9092 (0x2384) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'JMicron Technology Corp.' (string) pci.vendor_id = 6523 (0x197b) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_9606' freebsd.driver = 'pcib' (string) freebsd.unit = 4 (0x4) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (PCIE port 2)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9606' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 6 (0x6) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 9 (0x9) (int) pci.product = 'RS780 PCI to PCI bridge (PCIE port 2)' (string) pci.product_id = 38406 (0x9606) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_168c_002a' info.parent = '/org/freedesktop/Hal/devices/pci_1022_9606' (string) info.product = 'AR928X Wireless Network Adapter (PCI-Express)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_168c_002a' (string) info.vendor = 'Atheros Communications Inc.' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.freebsd.bus = 9 (0x9) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'AR928X Wireless Network Adapter (PCI-Express)' (string) pci.product_id = 42 (0x2a) (int) pci.subsys_product_id = 4993 (0x1381) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Atheros Communications Inc.' (string) pci.vendor_id = 5772 (0x168c) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_9607' freebsd.driver = 'pcib' (string) freebsd.unit = 5 (0x5) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (PCIE port 3)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9607' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 7 (0x7) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 10 (0xa) (int) pci.product = 'RS780 PCI to PCI bridge (PCIE port 3)' (string) pci.product_id = 38407 (0x9607) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_10ec_8136' freebsd.driver = 're' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1022_9607' (string) info.product = 'RTL8101E/RTL8102E PCI Express Fast Ethernet controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string) info.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 10 (0xa) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'RTL8101E/RTL8102E PCI Express Fast Ethernet controller' (string) pci.product_id = 33078 (0x8136) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.vendor_id = 4332 (0x10ec) (int) udi = '/org/freedesktop/Hal/devices/net_00_1e_ec_fe_df_1a' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string) info.product = 'Networking Interface' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1e_ec_fe_df_1a' (string) net.80203.link = true (bool) net.80203.mac_address = 132825145114 (0x1eecfedf1a) (uint64) net.80203.rate = 100000000 (0x5f5e100) (uint64) net.address = '00:1e:ec:fe:df:1a' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.freebsd.ifindex = 1 (0x1) (int) net.interface = 're0' (string) net.interface_up = true (bool) net.media = 'Ethernet autoselect (100baseTX )' (string) net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_1002_4391' freebsd.driver = 'atapci' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 SATA Controller [AHCI mode]' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 6 (0x6) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 17 (0x11) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 128 (0x80) (int) pci.product = 'SB700/SB800 SATA Controller [AHCI mode]' (string) pci.product_id = 17297 (0x4391) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' block.device = '/dev/ad4' (string) block.is_volume = false (bool) block.major = 0 (0x0) (int) block.minor = 77 (0x4d) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) freebsd.device_file = '/dev/ad4' (string) freebsd.driver = 'ad' (string) freebsd.unit = 4 (0x4) (int) info.capabilities = {'block', 'storage'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.product = 'Storage Device' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'platform' (string) storage.drive_type = 'disk' (string) storage.hotpluggable = false (bool) storage.media_check_enabled = false (bool) storage.model = '' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '' (string) storage.removable = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.vendor = '' (string) udi = '/org/freedesktop/Hal/devices/volume_part1_size_306210691584' block.device = '/dev/ad4s1' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 78 (0x4e) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.product = 'Volume' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_306210691584' (string) volume.block_size = 512 (0x200) (uint64) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.ignore = true (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.mount_point = '' (string) volume.num_blocks = 598067757 (0x23a5ca2d) (uint64) volume.partition.media_size = 306210691584 (0x474b945a00) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0xa5' (string) volume.size = 306210691584 (0x474b945a00) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_size_536870912_0' block.device = '/dev/ad4s1a' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 80 (0x50) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/volume_part1_size_306210691584' (string) info.product = 'Volume (ufs)' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_size_536870912_0' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (uint64) volume.fstype = 'ufs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '2' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = false (bool) volume.label = '' (string) volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list) volume.mount_point = '/' (string) volume.num_blocks = 1048576 (0x100000) (uint64) volume.size = 536870912 (0x20000000) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_size_4294967296' block.device = '/dev/ad4s1b' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 81 (0x51) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/volume_part1_size_306210691584' (string) info.product = 'Volume' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_size_4294967296' (string) volume.block_size = 512 (0x200) (uint64) volume.fstype = '' (string) volume.fsusage = 'other' (string) volume.ignore = true (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = false (bool) volume.label = '' (string) volume.mount_point = '' (string) volume.num_blocks = 8388608 (0x800000) (uint64) volume.size = 4294967296 (0x100000000) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_size_5080350720' block.device = '/dev/ad4s1d' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 83 (0x53) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/volume_part1_size_306210691584' (string) info.product = 'Volume (ufs)' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_size_5080350720' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (uint64) volume.fstype = 'ufs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '2' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = false (bool) volume.label = '' (string) volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list) volume.mount_point = '/var' (string) volume.num_blocks = 9922560 (0x976800) (uint64) volume.size = 5080350720 (0x12ed00000) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_size_536870912' block.device = '/dev/ad4s1e' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 84 (0x54) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/volume_part1_size_306210691584' (string) info.product = 'Volume (ufs)' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_size_536870912' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (uint64) volume.fstype = 'ufs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '2' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = false (bool) volume.label = '' (string) volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list) volume.mount_point = '/tmp' (string) volume.num_blocks = 1048576 (0x100000) (uint64) volume.size = 536870912 (0x20000000) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_size_295761631744' block.device = '/dev/ad4s1f' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 85 (0x55) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/volume_part1_size_306210691584' (string) info.product = 'Volume (ufs)' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_size_295761631744' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (uint64) volume.fstype = 'ufs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '2' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = false (bool) volume.label = '' (string) volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list) volume.mount_point = '/usr' (string) volume.num_blocks = 577659437 (0x226e622d) (uint64) volume.size = 295761631744 (0x44dcc45a00) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_13B7_12FE' block.device = '/dev/ad4s2' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 79 (0x4f) (int) block.storage_device = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_storage' (string) info.product = 'Volume (vfat)' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_13B7_12FE' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (uint64) volume.fstype = 'vfat' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = 'FAT32' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.mount.valid_options = {'ro', 'noexec', 'noatime', 'longnames', 'shortnames', 'nowin95', '-u=', '-g=', '-m=', '-M=', '-L=', '-D=', 'large'} (string list) volume.mount_point = '' (string) volume.num_blocks = 27060224 (0x19ce800) (uint64) volume.partition.media_size = 13854834688 (0x339d00000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 306214600704 (0x474bd00000) (uint64) volume.partition.type = '0x7' (string) volume.size = 13854834688 (0x339d00000) (uint64) volume.uuid = '13B7-12FE' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4397_0' freebsd.driver = 'ohci' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB OHCI0 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4397_0' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 18 (0x12) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700/SB800 USB OHCI0 Controller' (string) pci.product_id = 17303 (0x4397) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial' freebsd.driver = 'uhub' (string) freebsd.unit = 0 (0x0) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4397_0' (string) info.product = 'OHCI root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial' (string) info.vendor = 'ATI' (string) usb_device.bus_number = 0 (0x0) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.port_number = 1 (0x1) (int) usb_device.product = 'OHCI root hub' (string) usb_device.product_id = 0 (0x0) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'ATI' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_if0' (string) usb.bus_number = 0 (0x0) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.port_number = 1 (0x1) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'ATI' (string) usb.vendor_id = 0 (0x0) (int) usb.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4398_0' freebsd.driver = 'ohci' (string) freebsd.unit = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700 USB OHCI1 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4398_0' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 18 (0x12) (int) pci.freebsd.function = 1 (0x1) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700 USB OHCI1 Controller' (string) pci.product_id = 17304 (0x4398) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_0' freebsd.driver = 'uhub' (string) freebsd.unit = 1 (0x1) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4398_0' (string) info.product = 'OHCI root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_0' (string) info.vendor = 'ATI' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.port_number = 1 (0x1) (int) usb_device.product = 'OHCI root hub' (string) usb_device.product_id = 0 (0x0) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'ATI' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_0_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_0_if0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.port_number = 1 (0x1) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'ATI' (string) usb.vendor_id = 0 (0x0) (int) usb.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4396_0' freebsd.driver = 'ehci' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4396_0' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 18 (0x12) (int) pci.freebsd.function = 2 (0x2) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700/SB800 USB EHCI Controller' (string) pci.product_id = 17302 (0x4396) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307' freebsd.driver = 'umass' (string) freebsd.unit = 0 (0x0) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4396_0' (string) info.product = 'JD FIREFLY' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307' (string) info.vendor = 'LEXAR' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 4352 (0x1100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.port_number = 3 (0x3) (int) usb_device.product = 'JD FIREFLY' (string) usb_device.product_id = 42753 (0xa701) (int) usb_device.serial = '1069F003042445170307' (string) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'LEXAR' (string) usb_device.vendor_id = 1500 (0x5dc) (int) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307' (string) info.product = 'USB Mass Storage Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 4352 (0x1100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.port_number = 3 (0x3) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 42753 (0xa701) (int) usb.serial = '1069F003042445170307' (string) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'LEXAR' (string) usb.vendor_id = 1500 (0x5dc) (int) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0_scsi_host' info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0_scsi_host' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0_scsi_host_scsi_device_lun0' info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0_scsi_host_scsi_device_lun0' (string) info.vendor = 'LEXAR' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'JD FIREFLY' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'LEXAR' (string) udi = '/org/freedesktop/Hal/devices/storage_model_JD_FIREFLY' block.device = '/dev/da0' (string) block.freebsd.cam_path = '0,0,0' (string) block.is_volume = false (bool) block.major = 0 (0x0) (int) block.minor = 105 (0x69) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_JD_FIREFLY' (string) freebsd.device_file = '/dev/da0' (string) freebsd.driver = 'da' (string) freebsd.unit = 0 (0x0) (int) info.addons = {'hald-addon-storage'} (string list) info.capabilities = {'block', 'storage'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0_scsi_host_scsi_device_lun0' (string) info.product = 'JD FIREFLY' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_JD_FIREFLY' (string) info.vendor = 'LEXAR' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_revision = '1100' (string) storage.hotpluggable = true (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'JD FIREFLY' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_5dc_a701_1069F003042445170307_if0' (string) storage.removable = true (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.vendor = 'LEXAR' (string) udi = '/org/freedesktop/Hal/devices/volume_part1_size_8019492864' block.device = '/dev/da0s1' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 106 (0x6a) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_JD_FIREFLY' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_model_JD_FIREFLY' (string) info.product = 'Volume' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_8019492864' (string) volume.block_size = 512 (0x200) (uint64) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.ignore = true (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.mount_point = '/ramstick' (string) volume.num_blocks = 15663072 (0xeeffe0) (uint64) volume.partition.media_size = 8019492864 (0x1ddffc000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 16384 (0x4000) (uint64) volume.partition.type = '0xc' (string) volume.size = 8019492864 (0x1ddffc000) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_7AC3_ED08' block.device = '/dev/msdosfs/Lexar' (string) block.is_volume = true (bool) block.major = 0 (0x0) (int) block.minor = 108 (0x6c) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_JD_FIREFLY' (string) info.capabilities = {'block', 'volume'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/volume_part1_size_8019492864' (string) info.product = 'Lexar' (string) info.subsystem = 'block' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7AC3_ED08' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (uint64) volume.fstype = 'vfat' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = 'FAT32' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = false (bool) volume.label = 'Lexar' (string) volume.mount.valid_options = {'ro', 'noexec', 'noatime', 'longnames', 'shortnames', 'nowin95', '-u=', '-g=', '-m=', '-M=', '-L=', '-D=', 'large'} (string list) volume.mount_point = '' (string) volume.num_blocks = 15663072 (0xeeffe0) (uint64) volume.size = 8019492864 (0x1ddffc000) (uint64) volume.uuid = '7AC3-ED08' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_1' freebsd.driver = 'uhub' (string) freebsd.unit = 2 (0x2) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4396_0' (string) info.product = 'EHCI root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_1' (string) info.vendor = 'ATI' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.freebsd.ports = {'2'} (string list) usb_device.is_self_powered = true (bool) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 6 (0x6) (int) usb_device.port_number = 1 (0x1) (int) usb_device.product = 'EHCI root hub' (string) usb_device.product_id = 0 (0x0) (int) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'ATI' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial' freebsd.device_file = '/dev/ugen0' (string) freebsd.driver = 'ugen' (string) freebsd.unit = 0 (0x0) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_1' (string) info.product = 'HP Webcam' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial' (string) info.vendor = 'Image Processor' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 239 (0xef) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 4374 (0x1116) (int) usb_device.device_subclass = 2 (0x2) (int) usb_device.is_self_powered = false (bool) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.port_number = 2 (0x2) (int) usb_device.product = 'HP Webcam' (string) usb_device.product_id = 50033 (0xc371) (int) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'Image Processor' (string) usb_device.vendor_id = 2316 (0x90c) (int) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial_if0_0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial_if0_0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 4374 (0x1116) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 2 (0x2) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.port_number = 2 (0x2) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 50033 (0xc371) (int) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'Image Processor' (string) usb.vendor_id = 2316 (0x90c) (int) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_90c_c371_noserial_if0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 4374 (0x1116) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.port_number = 2 (0x2) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 50033 (0xc371) (int) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'Image Processor' (string) usb.vendor_id = 2316 (0x90c) (int) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_1_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_1_if0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.freebsd.ports = {'2'} (string list) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 6 (0x6) (int) usb.port_number = 1 (0x1) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'ATI' (string) usb.vendor_id = 0 (0x0) (int) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4397' freebsd.driver = 'ohci' (string) freebsd.unit = 2 (0x2) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB OHCI0 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4397' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 19 (0x13) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700/SB800 USB OHCI0 Controller' (string) pci.product_id = 17303 (0x4397) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_2' freebsd.driver = 'uhub' (string) freebsd.unit = 3 (0x3) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4397' (string) info.product = 'OHCI root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_2' (string) info.vendor = 'ATI' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.port_number = 1 (0x1) (int) usb_device.product = 'OHCI root hub' (string) usb_device.product_id = 0 (0x0) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'ATI' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_2_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_2_if0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.port_number = 1 (0x1) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'ATI' (string) usb.vendor_id = 0 (0x0) (int) usb.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4398' freebsd.driver = 'ohci' (string) freebsd.unit = 3 (0x3) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700 USB OHCI1 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4398' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 19 (0x13) (int) pci.freebsd.function = 1 (0x1) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700 USB OHCI1 Controller' (string) pci.product_id = 17304 (0x4398) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_3' freebsd.driver = 'uhub' (string) freebsd.unit = 4 (0x4) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4398' (string) info.product = 'OHCI root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_3' (string) info.vendor = 'ATI' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.port_number = 1 (0x1) (int) usb_device.product = 'OHCI root hub' (string) usb_device.product_id = 0 (0x0) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'ATI' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_3_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_3_if0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.port_number = 1 (0x1) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'ATI' (string) usb.vendor_id = 0 (0x0) (int) usb.version_bcd = 256 (0x100) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4396' freebsd.driver = 'ehci' (string) freebsd.unit = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4396' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 19 (0x13) (int) pci.freebsd.function = 2 (0x2) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700/SB800 USB EHCI Controller' (string) pci.product_id = 17302 (0x4396) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_4' freebsd.driver = 'uhub' (string) freebsd.unit = 5 (0x5) (int) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4396' (string) info.product = 'EHCI root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_4' (string) info.vendor = 'ATI' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 6 (0x6) (int) usb_device.port_number = 1 (0x1) (int) usb_device.product = 'EHCI root hub' (string) usb_device.product_id = 0 (0x0) (int) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'ATI' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_4_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_4' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_4_if0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 6 (0x6) (int) usb.port_number = 1 (0x1) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'ATI' (string) usb.vendor_id = 0 (0x0) (int) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4385' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4385' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 20 (0x14) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SBx00 SMBus Controller' (string) pci.product_id = 17285 (0x4385) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_439c' freebsd.driver = 'atapci' (string) freebsd.unit = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 IDE Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_439c' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 138 (0x8a) (int) pci.device_subclass = 1 (0x1) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 20 (0x14) (int) pci.freebsd.function = 1 (0x1) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700/SB800 IDE Controller' (string) pci.product_id = 17308 (0x439c) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/ide_host_0' freebsd.driver = 'ata' (string) freebsd.unit = 0 (0x0) (int) ide_host.number = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1002_439c' (string) info.product = 'ATA channel 0' (string) info.subsystem = 'ide_host' (string) info.udi = '/org/freedesktop/Hal/devices/ide_host_0' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383' freebsd.driver = 'hdac' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 Azalia (Intel HDA)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 20 (0x14) (int) pci.freebsd.function = 2 (0x2) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SBx00 Azalia (Intel HDA)' (string) pci.product_id = 17283 (0x4383) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pcm_0' freebsd.driver = 'pcm' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.product = 'HDA IDT 92HD71B7 PCM #0 Analog' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_0' (string) platform.id = 'pcm.0' (string) udi = '/org/freedesktop/Hal/devices/pcm_0_oss_mixer_0' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_0' (string) info.product = 'HDA IDT 92HD71B7 PCM #0 Analog (mixer)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_0_oss_mixer_0' (string) oss.card = 0 (0x0) (int) oss.card_id = 'snd_hda [MPSAFE] (1p:1v/1r:1v channels duplex default)' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/mixer0' (string) oss.device_id = 'HDA IDT 92HD71B7 PCM #0 Analog (mixer)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pcm_0_oss_pcm_0' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_0' (string) info.product = 'HDA IDT 92HD71B7 PCM #0 Analog (pcm)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_0_oss_pcm_0' (string) oss.card = 0 (0x0) (int) oss.card_id = 'snd_hda [MPSAFE] (1p:1v/1r:1v channels duplex default)' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp0' (string) oss.device_id = 'HDA IDT 92HD71B7 PCM #0 Analog (pcm)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pcm_1' freebsd.driver = 'pcm' (string) freebsd.unit = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.product = 'HDA IDT 92HD71B7 PCM #1 Analog' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_1' (string) platform.id = 'pcm.1' (string) udi = '/org/freedesktop/Hal/devices/pcm_1_oss_mixer_1' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_1' (string) info.product = 'HDA IDT 92HD71B7 PCM #1 Analog (mixer)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_1_oss_mixer_1' (string) oss.card = 1 (0x1) (int) oss.card_id = 'snd_hda [MPSAFE] (0p:0v/1r:1v channels)' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/mixer1' (string) oss.device_id = 'HDA IDT 92HD71B7 PCM #1 Analog (mixer)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_1' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pcm_1_oss_pcm_1' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_1' (string) info.product = 'HDA IDT 92HD71B7 PCM #1 Analog (pcm)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_1_oss_pcm_1' (string) oss.card = 1 (0x1) (int) oss.card_id = 'snd_hda [MPSAFE] (0p:0v/1r:1v channels)' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/dsp1' (string) oss.device_id = 'HDA IDT 92HD71B7 PCM #1 Analog (pcm)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_1' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pcm_2' freebsd.driver = 'pcm' (string) freebsd.unit = 2 (0x2) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.product = 'HDA IDT 92HD71B7 PCM #2 Digital' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_2' (string) platform.id = 'pcm.2' (string) udi = '/org/freedesktop/Hal/devices/pcm_2_oss_mixer_2' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_2' (string) info.product = 'HDA IDT 92HD71B7 PCM #2 Digital (mixer)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_2_oss_mixer_2' (string) oss.card = 2 (0x2) (int) oss.card_id = 'snd_hda [MPSAFE] (1p:1v/0r:0v channels)' (string) oss.device = 2 (0x2) (int) oss.device_file = '/dev/mixer2' (string) oss.device_id = 'HDA IDT 92HD71B7 PCM #2 Digital (mixer)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_2' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pcm_2_oss_pcm_2' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pcm_2' (string) info.product = 'HDA IDT 92HD71B7 PCM #2 Digital (pcm)' (string) info.udi = '/org/freedesktop/Hal/devices/pcm_2_oss_pcm_2' (string) oss.card = 2 (0x2) (int) oss.card_id = 'snd_hda [MPSAFE] (1p:1v/0r:0v channels)' (string) oss.device = 2 (0x2) (int) oss.device_file = '/dev/dsp2' (string) oss.device_id = 'HDA IDT 92HD71B7 PCM #2 Digital (pcm)' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pcm_2' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_439d' freebsd.driver = 'isab' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 LPC host controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_439d' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 20 (0x14) (int) pci.freebsd.function = 3 (0x3) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'SB700/SB800 LPC host controller' (string) pci.product_id = 17309 (0x439d) (int) pci.subsys_product_id = 12540 (0x30fc) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/sio_0' freebsd.driver = 'sio' (string) freebsd.unit = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/pci_1002_439d' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/sio_0' (string) platform.id = 'sio.0' (string) udi = '/org/freedesktop/Hal/devices/sio_0_serial_platform_0' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/sio_0' (string) info.udi = '/org/freedesktop/Hal/devices/sio_0_serial_platform_0' (string) serial.device = '/dev/ttyd0' (string) serial.originating_device = '/org/freedesktop/Hal/devices/sio_0' (string) serial.port = 0 (0x0) (int) serial.type = 'platform' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4384' freebsd.driver = 'pcib' (string) freebsd.unit = 6 (0x6) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 PCI to PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4384' (string) info.vendor = 'ATI Technologies Inc' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 20 (0x14) (int) pci.freebsd.function = 4 (0x4) (int) pci.freebsd.secondary_bus = 128 (0x80) (int) pci.product = 'SBx00 PCI to PCI Bridge' (string) pci.product_id = 17284 (0x4384) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1300' freebsd.driver = 'hostb' (string) freebsd.unit = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1300' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 24 (0x18) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration' (string) pci.product_id = 4864 (0x1300) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1301' freebsd.driver = 'hostb' (string) freebsd.unit = 2 (0x2) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 11h [Turion X2, Athlon X2, Sempron] Address Map' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1301' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 24 (0x18) (int) pci.freebsd.function = 1 (0x1) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'Family 11h [Turion X2, Athlon X2, Sempron] Address Map' (string) pci.product_id = 4865 (0x1301) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1302' freebsd.driver = 'hostb' (string) freebsd.unit = 3 (0x3) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1302' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 24 (0x18) (int) pci.freebsd.function = 2 (0x2) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller' (string) pci.product_id = 4866 (0x1302) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1303' freebsd.driver = 'hostb' (string) freebsd.unit = 4 (0x4) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1303' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 24 (0x18) (int) pci.freebsd.function = 3 (0x3) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control' (string) pci.product_id = 4867 (0x1303) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1304' freebsd.driver = 'hostb' (string) freebsd.unit = 5 (0x5) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1304' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.freebsd.bus = 0 (0x0) (int) pci.freebsd.device = 24 (0x18) (int) pci.freebsd.function = 4 (0x4) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product = 'Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control' (string) pci.product_id = 4868 (0x1304) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) Dumped 89 device(s) from the Global Device List. ------------------------------------------------ --------------050906080001080500000303-- From ml at netfence.it Tue Sep 8 09:10:47 2009 From: ml at netfence.it (Andrea Venturoli) Date: Tue Sep 8 09:10:53 2009 Subject: ports/132398 Message-ID: <4AA61CD7.8000808@netfence.it> Hello. WRT the above PR, I'd like to say I still experience that. I'm using firefox 3.0.13,1 under KDE3 on 6.3R/i386 and gtk-qt-engine in order to have FireFox (and ThunderBird) appear more alike the other apps. Starting FireFox, I get a lot of messages like: (firefox-bin:27321): Gtk-WARNING **: Error loading icon: Failed to load image '/usr/local/share/icons/crystalsvg/16x16/actions/fileclose.png': Fatal error in PNG image file: [00][00][00][00]: unknown critical chunk (the name of the file will vary). Of course the icon file is there and can be opened and seen with other programs. Any help is appreciated, but I think the PR should be reopened. If you just need any info I can provide, just ask. BTW, in KDE's control center there's a button ("Install scrollbar fix") that says it should fix this in Firefox and Thunderbird, by copying some files in my personal profile. I tried this and it does not change anything; besides thunderbird is already fine. bye & Thanks av. From rossco at videotron.ca Tue Sep 8 16:24:22 2009 From: rossco at videotron.ca (Ross Group Inc) Date: Tue Sep 8 16:24:29 2009 Subject: automount_drives Message-ID: <1252423460.3557.60.camel@kerzpp2> Hello, I'm trying to set FreeBSD 8.0 with Gnome as my production OS. Currently I have problem with automounting: almost all my drives and partitions appear on Desktop. Only usb sticks and fat32 storage partition are not mounted (on 8.0) but they are exactly those I need to be automounted:) BTW another fat32 storage partition from slave HDD appears automounted... I read Gnome FAQ and hal FAQ, I googled and found some solution for linux that doesn't work on FreeBSD. I know that I can edit fstab to exclude partitions from automounting and I also can edit/create .fdi file to prevent hal from automounting some partition. However the partitions then disappear from Computer and Removable Media completely. I'd like to set mounting same way as it's done in Ubuntu: all the partitions are listed in Computer and Removable Media but they are not automounted so I can mount any of them as I need with one click. As to removable media such as CD/DVD and usb-sticks I'd like to appear automounted as inserted. I really tried to solve this myself and with the forum help but...no luck. Please help! From marcus at marcuscom.com Tue Sep 8 16:28:52 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Tue Sep 8 16:28:58 2009 Subject: automount_drives In-Reply-To: <1252423460.3557.60.camel@kerzpp2> References: <1252423460.3557.60.camel@kerzpp2> Message-ID: <1252427331.1268.26.camel@shumai.marcuscom.com> On Tue, 2009-09-08 at 11:24 -0400, Ross Group Inc wrote: > Hello, > I'm trying to set FreeBSD 8.0 with Gnome as my production OS. > Currently I have problem with automounting: almost all my drives and > partitions > appear on Desktop. > Only usb sticks and fat32 storage partition are not mounted (on 8.0) but > they are > exactly those I need to be automounted:) > BTW another fat32 storage partition from slave HDD appears > automounted... > > I read Gnome FAQ and hal FAQ, I googled and found some solution for > linux that > doesn't work on FreeBSD. If you read the HAL FAQ, then you know what is required for troubleshooting this kind of problem. Where is that data? You should also make sure you have recently rebuilt hal for your version of FreeBSD. There have been a lot of USB changes of late. Joe > I know that I can edit fstab to exclude partitions from automounting and > I also can > edit/create .fdi file to prevent hal from automounting some partition. > However the > partitions then disappear from Computer and Removable Media completely. > > I'd like to set mounting same way as it's done in Ubuntu: all the > partitions are > listed in Computer and Removable Media but they are not automounted so I > can > mount any of them as I need with one click. > As to removable media such as CD/DVD and usb-sticks I'd like to appear > automounted as inserted. > > I really tried to solve this myself and with the forum help but...no > luck. > > Please help! > > > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090908/193837c5/attachment.pgp From marcus at marcuscom.com Tue Sep 8 16:30:16 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Tue Sep 8 16:30:23 2009 Subject: brasero,dvdrw and libburn In-Reply-To: References: Message-ID: <1252427415.1268.27.camel@shumai.marcuscom.com> On Mon, 2009-09-07 at 23:05 -0300, gula nito wrote: > Hi. > > I need to activate the libburn backend in brasero cause I need support for > DVD-RW. > (I have support for CD,CDRW and DVD, but a DVD-RW is not recognized by > brasero. I read http://forums.freebsd.org/archive/index.php/t-3586.html and > the cause of that problem seems to be that whit the default backend there > aren't DVDRW support). > I was compiled brasero from ports yesterday whit the libburnia option > activated, but in the gconf-editor I can't see the lbburn_iso nor the > libburn_burn keys for activate it. See http://bbs.archlinux.org/viewtopic.php?id=44519 . Joe -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090908/6b45739a/attachment.pgp From marcus at FreeBSD.org Tue Sep 8 19:26:35 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Tue Sep 8 19:26:42 2009 Subject: ports/138564: x11-fonts/bitstream-vera missing mtree Message-ID: <200909081926.n88JQZrV016953@freefall.freebsd.org> Synopsis: x11-fonts/bitstream-vera missing mtree State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Tue Sep 8 19:26:26 UTC 2009 State-Changed-Why: Fixed, thanks. http://www.freebsd.org/cgi/query-pr.cgi?pr=138564 From marcus at FreeBSD.org Tue Sep 8 19:28:27 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Tue Sep 8 19:28:33 2009 Subject: ports/138493: devel/nspr: add regression-test target Message-ID: <200909081928.n88JSQBX017027@freefall.freebsd.org> Synopsis: devel/nspr: add regression-test target State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Tue Sep 8 19:27:27 UTC 2009 State-Changed-Why: The tests have a tendency to lock up pointyhat, and that is why they are not true regression tests. Given that the actual package works fine otherwise, it was decided not to enable them. http://www.freebsd.org/cgi/query-pr.cgi?pr=138493 From dfilter at FreeBSD.ORG Tue Sep 8 19:30:04 2009 From: dfilter at FreeBSD.ORG (dfilter service) Date: Tue Sep 8 19:30:09 2009 Subject: ports/138564: commit references a PR Message-ID: <200909081930.n88JU3jT017219@freefall.freebsd.org> The following reply was made to PR ports/138564; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138564: commit references a PR Date: Tue, 8 Sep 2009 19:26:36 +0000 (UTC) marcus 2009-09-08 19:26:23 UTC FreeBSD ports repository Modified files: x11-fonts/bitstream-vera Makefile Log: Use the default MTREE_FILE. PR: 138564 Revision Changes Path 1.19 +0 -2 ports/x11-fonts/bitstream-vera/Makefile _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" From marcus at FreeBSD.org Tue Sep 8 21:34:00 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Tue Sep 8 21:34:06 2009 Subject: ports/138419: [patch] security/nss version upgrade Message-ID: <200909082134.n88LY05h048354@freefall.freebsd.org> Synopsis: [patch] security/nss version upgrade State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Tue Sep 8 21:33:51 UTC 2009 State-Changed-Why: Committed, thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=138419 From dfilter at FreeBSD.ORG Tue Sep 8 21:40:03 2009 From: dfilter at FreeBSD.ORG (dfilter service) Date: Tue Sep 8 21:40:11 2009 Subject: ports/138419: commit references a PR Message-ID: <200909082140.n88Le2Bj048497@freefall.freebsd.org> The following reply was made to PR ports/138419; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138419: commit references a PR Date: Tue, 8 Sep 2009 21:33:57 +0000 (UTC) marcus 2009-09-08 21:33:43 UTC FreeBSD ports repository Modified files: security/nss Makefile distinfo pkg-plist security/nss/files nss-config.in nss.pc.in patch-..::coreconf::FreeBSD.mk patch-sysdb Added files: security/nss/files sqlite3-builtin.patch sqlite3-system.patch Removed files: security/nss/files patch-cmd::platlibs.mk Log: Update to 3.12.4. PR: 138419 Submitted by: Aragon Gouveia Revision Changes Path 1.47 +20 -3 ports/security/nss/Makefile 1.17 +3 -3 ports/security/nss/distinfo 1.2 +8 -0 ports/security/nss/files/nss-config.in 1.2 +1 -1 ports/security/nss/files/nss.pc.in 1.12 +10 -7 ports/security/nss/files/patch-..::coreconf::FreeBSD.mk 1.5 +0 -14 ports/security/nss/files/patch-cmd::platlibs.mk (dead) 1.4 +87 -124 ports/security/nss/files/patch-sysdb 1.1 +63 -0 ports/security/nss/files/sqlite3-builtin.patch (new) 1.1 +13 -0 ports/security/nss/files/sqlite3-system.patch (new) 1.10 +8 -1 ports/security/nss/pkg-plist _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" From marcus at FreeBSD.org Tue Sep 8 21:41:25 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Tue Sep 8 21:41:31 2009 Subject: ports/138312: [PATCH]textproc/link-grammar: update to 4.5.10 Message-ID: <200909082141.n88LfPFL057758@freefall.freebsd.org> Synopsis: [PATCH]textproc/link-grammar: update to 4.5.10 State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Tue Sep 8 21:41:16 UTC 2009 State-Changed-Why: Committed, thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=138312 From dfilter at FreeBSD.ORG Tue Sep 8 21:50:02 2009 From: dfilter at FreeBSD.ORG (dfilter service) Date: Tue Sep 8 21:50:08 2009 Subject: ports/138312: commit references a PR Message-ID: <200909082150.n88Lo1Pv057888@freefall.freebsd.org> The following reply was made to PR ports/138312; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138312: commit references a PR Date: Tue, 8 Sep 2009 21:41:20 +0000 (UTC) marcus 2009-09-08 21:41:12 UTC FreeBSD ports repository Modified files: textproc/link-grammar Makefile distinfo pkg-plist Added files: textproc/link-grammar/files patch-configure patch-data__en__4.0.affix Log: Update to 4.5.10. PR: 138312 Submitted by: bf Revision Changes Path 1.11 +3 -1 ports/textproc/link-grammar/Makefile 1.8 +3 -3 ports/textproc/link-grammar/distinfo 1.3 +11 -0 ports/textproc/link-grammar/files/patch-configure (new) 1.1 +12 -0 ports/textproc/link-grammar/files/patch-data__en__4.0.affix (new) 1.6 +5 -1 ports/textproc/link-grammar/pkg-plist _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" From linimon at FreeBSD.org Wed Sep 9 15:08:23 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Wed Sep 9 15:08:36 2009 Subject: ports/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Message-ID: <200909091508.n89F8NVj053035@freefall.freebsd.org> Old Synopsis: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo New Synopsis: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Responsible-Changed-From-To: freebsd-amd64->gnome Responsible-Changed-By: linimon Responsible-Changed-When: Wed Sep 9 15:07:31 UTC 2009 Responsible-Changed-Why: Make this a ports PR and assign. http://www.freebsd.org/cgi/query-pr.cgi?pr=138665 From swhetzel at gmail.com Wed Sep 9 15:50:07 2009 From: swhetzel at gmail.com (Scot Hetzel) Date: Wed Sep 9 15:50:16 2009 Subject: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Message-ID: <200909091550.n89Fo674096348@freefall.freebsd.org> The following reply was made to PR ports/138665; it has been noted by GNATS. From: Scot Hetzel To: Randy Belk Cc: freebsd-gnats-submit@freebsd.org Subject: Re: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Date: Wed, 9 Sep 2009 10:17:29 -0500 On Wed, Sep 9, 2009 at 9:30 AM, Randy Belk wrote: >>Description: > The build of py25-gtk-2.14.1_1 fails due to dependency on py25-cairo-1.8.8 which is not /usr/ports anymore, py26-cairo-1.8.8 is the current. >>How-To-Repeat: > cd /usr/ports/x11-toolkits/py-gtk2 > make install >>Fix: > See the ports/UPDATING entry dated 20090608: http://www.freebsd.org/cgi/cvsweb.cgi/ports/UPDATING?rev=1.855;content-type=text%2Fplain Specifically, you need to set PYTHON_DEFAULT_VERSION variable to 'python2.5' (without quotes) in /etc/make.conf Scot From randy.belk at gmail.com Wed Sep 9 16:20:04 2009 From: randy.belk at gmail.com (Randy Belk) Date: Wed Sep 9 16:20:14 2009 Subject: ports/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Message-ID: <200909091620.n89GK4Vo025650@freefall.freebsd.org> The following reply was made to PR ports/138665; it has been noted by GNATS. From: Randy Belk To: bug-followup@freebsd.org Cc: Subject: Re: ports/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Date: Wed, 9 Sep 2009 10:47:45 -0500 I have "PYTHON_DEFAULT_VERSION=python2.5" already in /etc/make.conf. -- - Amiga, The Computer for the creative Mind! - UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity. - People who hate Microsoft Windows use Linux but people who love UNIX use BSD. From garga at FreeBSD.org Wed Sep 9 18:38:53 2009 From: garga at FreeBSD.org (Renato Botelho) Date: Wed Sep 9 18:39:00 2009 Subject: gtk20 always replace gtk.immodules Message-ID: <20090909181301.GB66062@bluepex.com> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, My default environment language is en_US, but I need ? char working properly since my first language is pt_BR, I had problems in the past with deadkeys on gtk windows and c was show with an acute accent instead of cedilla. When i researched in the past I found a solution adding en on following line: "cedilla" "Cedilla" "gtk20" "/usr/local/share/locale" "az:ca:co:en:fr:gv:oc:pt:sq:tr:wa" on /usr/local/etc/gtk-2.0/gtk.immodules, but this file is replaced every time i update gtk port, is it expected? A lot of ports respect files under /usr/local/etc when they are changed by user, what do you think if gtk port does the same? If you say yes, i can try to make a patch for this. Thanks - -- Renato Botelho GnuPG Key: http://www.FreeBSD.org/~garga/pubkey.asc Riches cover a multitude of woes. -- Menander -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.13 (FreeBSD) iEYEARECAAYFAkqn8C0ACgkQ6CRbiSJE7am4YACfc2MwGXwd/QUNDDcqRXKEYBV8 IGIAoICX8l/GFyfF2o9Ko9rTFygLQBET =EN1m -----END PGP SIGNATURE----- From swhetzel at gmail.com Wed Sep 9 20:10:04 2009 From: swhetzel at gmail.com (Scot Hetzel) Date: Wed Sep 9 20:10:16 2009 Subject: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Message-ID: <200909092010.n89KA42P054870@freefall.freebsd.org> The following reply was made to PR ports/138665; it has been noted by GNATS. From: Scot Hetzel To: Randy Belk Cc: freebsd-gnats-submit@freebsd.org Subject: Re: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Date: Wed, 9 Sep 2009 15:00:45 -0500 On Wed, Sep 9, 2009 at 2:42 PM, Randy Belk wrote: > This is the error I get when compiling. This is actually a > graphics/py-cairo issue not a x11-toolkits/py-gtk2 issue. > Graphics/py-cairo is dependent on Python 2.6 and can not run with 2.5! > > =3D=3D=3D> =A0Extracting for py25-gtk-2.14.1_1 > =3D> MD5 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. > =3D> SHA256 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. > =3D=3D=3D> =A0Patching for py25-gtk-2.14.1_1 > =3D=3D=3D> =A0Applying FreeBSD patches for py25-gtk-2.14.1_1 > =3D=3D=3D> =A0 py25-gtk-2.14.1_1 depends on file: > /usr/local/lib/python2.5/site-packages/cairo/__init__.py - not found > =3D=3D=3D> =A0 =A0Verifying install for > /usr/local/lib/python2.5/site-packages/cairo/__init__.py in > /usr/ports/graphics/py-cairo > =3D=3D=3D> =A0py25-cairo-1.8.8 needs Python 2.6 at least. But you specifi= ed 2.5. > *** Error code 1 > > Stop in /usr/ports/graphics/py-cairo. > *** Error code 1 > > Stop in /usr/ports/x11-toolkits/py-gtk2. > > =3D=3D=3D>>> make failed for x11-toolkits/py-gtk2 > =3D=3D=3D>>> Aborting update > One option to allow py-cairo to work with python < 2.6 would be to do the following: 1. create a repo copy of py-cairo to py-cairo-old 2. down grade py-cairo-old to version 1.8.2 - which was the last version we had working with python 2.5. 3. Set py-cairo-old to only build with python < 2.6 Finally, all ports that have a dependancy on graphics/py-cairo could be changed as follows: .if ${PYTHON_SUFFIX} < 26 BUILD_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphic= s/py-cairo-old RUN_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphics/= py-cairo-old .else BUILD_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphic= s/py-cairo RUN_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphics/= py-cairo .fi Scot From randy.belk at onlybsd.com Wed Sep 9 20:10:06 2009 From: randy.belk at onlybsd.com (Randy Belk) Date: Wed Sep 9 20:10:16 2009 Subject: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Message-ID: <200909092010.n89KA6Z2054901@freefall.freebsd.org> The following reply was made to PR ports/138665; it has been noted by GNATS. From: Randy Belk To: Scot Hetzel Cc: freebsd-gnats-submit@freebsd.org Subject: Re: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Date: Wed, 9 Sep 2009 14:42:23 -0500 This is the error I get when compiling. This is actually a graphics/py-cairo issue not a x11-toolkits/py-gtk2 issue. Graphics/py-cairo is dependent on Python 2.6 and can not run with 2.5! ===> Extracting for py25-gtk-2.14.1_1 => MD5 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. => SHA256 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. ===> Patching for py25-gtk-2.14.1_1 ===> Applying FreeBSD patches for py25-gtk-2.14.1_1 ===> py25-gtk-2.14.1_1 depends on file: /usr/local/lib/python2.5/site-packages/cairo/__init__.py - not found ===> Verifying install for /usr/local/lib/python2.5/site-packages/cairo/__init__.py in /usr/ports/graphics/py-cairo ===> py25-cairo-1.8.8 needs Python 2.6 at least. But you specified 2.5. *** Error code 1 Stop in /usr/ports/graphics/py-cairo. *** Error code 1 Stop in /usr/ports/x11-toolkits/py-gtk2. ===>>> make failed for x11-toolkits/py-gtk2 ===>>> Aborting update -- - Amiga, The Computer for the creative Mind! - UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity. - People who hate Microsoft Windows use Linux but people who love UNIX use BSD. From miwi at FreeBSD.org Wed Sep 9 20:30:18 2009 From: miwi at FreeBSD.org (Martin Wilke) Date: Wed Sep 9 20:30:26 2009 Subject: [ports-i386@FreeBSD.org: gimp-help-2.4.2_1 failed on i386 7] Message-ID: <20090909203011.GF98067@bsdcrew.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - ----- Forwarded message from User Ports-i386 ----- Date: Wed, 9 Sep 2009 19:38:05 GMT From: User Ports-i386 To: erwin@FreeBSD.org, miwi@FreeBSD.org, linimon@FreeBSD.org Subject: gimp-help-2.4.2_1 failed on i386 7 Excerpt from the build log at http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.7.20090908204253/gimp-help-2.4.2_1.log building gimp-help-2.4.2_1 on gohan29.freebsd.org in directory /x/tmp/7/20090908204253/chroot/3 building for: 7.2-STABLE i386 maintained by: gnome@FreeBSD.org port directory: /usr/ports/graphics/gimp-help Makefile ident: $FreeBSD: ports/graphics/gimp-help/Makefile,v 1.15 2009/07/31 13:52:12 dinoex Exp $ [... lines trimmed ...] Spamming /etc/manpath.config... Done. =============================================================================== Gamin will only provide realtime notification of changes for at most n files, where n is the minimum value between (kern.maxfiles * 0.7) and (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. If you often open several large folders with Nautilus, you might want to increase the kern.maxfiles tunable (you do not need to set kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles). For a typical desktop, add the following line to /boot/loader.conf, then reboot the system: kern.maxfiles="25000" The behavior of gamin can be controlled via the various gaminrc files. See http://www.gnome.org/~veillard/gamin/config.html on how to create these files. In particular, if you find gam_server is taking up too much CPU time polling for changes, something like the following may help in one of the gaminrc files: # reduce polling frequency to once per 10 seconds # for UFS file systems in order to lower CPU load fsset ufs poll 10 =============================================================================== pkg_add OpenEXR-1.6.1_2.tbz pkg_add aalib-1.4.r5_4.tbz ***************************************************************** Although libxcb can yield dramatic improvements in speed, memory footprint, and responsiveness, and will probably become the default Xlib for X.org/freedesktop.org, it is still experimental software. Some broken callers will abort() on locking assertion failures. As a temporary workaround, set LIBXCB_ALLOW_SLOPPY_LOCK in your environment to skip the abort(). This may result in noisy stacktrace printing. ***************************************************************** pkg_add atk-1.26.0.tbz pkg_add avahi-app-0.6.25_2.tbz Added group "avahi". Added user "avahi". pkg_add babl-0.0.22_1.tbz pkg_add bash-4.0.24.tbz pkg_add bitstream-vera-1.10_4.tbz Running fc-cache to build fontconfig cache... /usr/local/lib/X11/fonts: caching, new cache contents: 0 fonts, 1 dirs /usr/local/lib/X11/fonts/local: caching, new cache contents: 0 fonts, 0 dirs /root/.fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory /root/.fontconfig: not cleaning non-existent cache directory fc-cache: succeeded /var/tmp/instmp.blwSWJ/lib/X11/fonts/bitstream-vera: caching, new cache contents: 10 fonts, 0 dirs /var/db/fontconfig: cleaning cache directory /var/db/fontconfig: invalid cache file: deea84fa067eec67b69dab1b2344175b-x86.cache-2 /root/.fontconfig: not cleaning non-existent cache directory /usr/local/bin/fc-cache: succeeded IMPORTANT - READ CAREFULLY: Please read the COPYRIGHT included with these fonts before using. The copyright can be found at /usr/local/lib/X11/fonts/bitstream-vera/COPYRIGHT.TXT. To use these fonts, follow the instructions below. Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/lib/X11/fonts/bitstream-vera/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. pkg_add boost-libs-1.39.0.tbz You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. pkg_add ca_root_nss-3.11.9_2.tbz pkg_add cairo-1.8.8,1.tbz pkg_add cdparanoia-3.9.8_8.tbz pkg_add compositeproto-0.4.tbz pkg_add consolekit-0.3.0_8.tbz pkg_add curl-7.19.6_1.tbz pkg_add damageproto-1.1.0_2.tbz pkg_add dbus-1.2.4.6_1.tbz skipping dbus-1.2.4.6_1, already added pkg_add dbus-glib-0.82.tbz skipping dbus-glib-0.82, already added pkg_add desktop-file-utils-0.15_1.tbz pkg_add dmidecode-2.10.tbz pkg_add docbook-1.4.tbz + Creating /usr/local/share/sgml/catalog + Registering CATALOG catalog.ports (SGML) + Creating /usr/local/share/sgml/catalog.ports + Creating /usr/local/share/xml/catalog + Registering nextCatalog catalog.ports (XML) + Creating /usr/local/share/xml/catalog.ports The following catalogs are installed: 1) ${PREFIX}/share/sgml/catalog The top level catalog for SGML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 2) ${PREFIX}/share/sgml/catalog.ports This catalog is for handling SGML stuff installed under ${PREFIX}/share/sgml. It is changed by ports/packages. 3) ${PREFIX}/share/xml/catalog The top level catalog for XML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 4) ${PREFIX}/share/xml/catalog.ports This catalog is for handling XML stuff installed under ${PREFIX}/share/xml. It is changed by ports/packages. pkg_add docbook-4.1_3.tbz skipping docbook-4.1_3, already added pkg_add docbook-4.2.tbz skipping docbook-4.2, already added pkg_add docbook-4.3.tbz skipping docbook-4.3, already added pkg_add docbook-4.4_2.tbz skipping docbook-4.4_2, already added pkg_add docbook-4.5_2.tbz skipping docbook-4.5_2, already added pkg_add docbook-5.0_1.tbz skipping docbook-5.0_1, already added pkg_add docbook-sk-4.1.2_4.tbz skipping docbook-sk-4.1.2_4, already added pkg_add docbook-xml-4.2_1.tbz skipping docbook-xml-4.2_1, already added pkg_add docbook-xml-4.3.tbz skipping docbook-xml-4.3, already added pkg_add docbook-xml-4.4_1.tbz skipping docbook-xml-4.4_1, already added pkg_add docbook-xml-4.5.tbz skipping docbook-xml-4.5, already added pkg_add docbook-xsl-1.75.1.tbz xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.36' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.36' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.37' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.37' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.38' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.38' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.39' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.39' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.40' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.40' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.41' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.41' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.42' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.42' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.43' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.43' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.44' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.44' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.45' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.45' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.46' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.46' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.47' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.47' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.48' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.48' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.49' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.49' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.50.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.50.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.2' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.2' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.53.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.53.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.55.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.55.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.57.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.57.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.2' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.2' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.2' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.2' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.3' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.3' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.2' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.2' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.3' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.3' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.4' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.4' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.63.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.63.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.2' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.2' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.0' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.0' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.1' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.1' of type `rewriteURI' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/current' of type `rewriteSystem' xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/current' of type `rewriteURI' pkg_add dri2proto-2.0.tbz pkg_add encodings-1.0.2,1.tbz pkg_add expat-2.0.1.tbz skipping expat-2.0.1, already added pkg_add faad2-2.7_1,1.tbz pkg_add ffmpeg-0.5,1.tbz pkg_add firefox-2.0.0.20_9,1.tbz /usr/local/lib/X11/fonts/OTF: caching, new cache contents: 22 fonts, 0 dirs /var/db/fontconfig: cleaning cache directory /var/db/fontconfig: invalid cache file: f99406907a961f69931996d00b69036b-x86.cache-2 /root/.fontconfig: not cleaning non-existent cache directory fc-cache: succeeded /usr/local/lib/X11/fonts/TTF: caching, new cache contents: 1 fonts, 0 dirs /var/db/fontconfig: cleaning cache directory /var/db/fontconfig: invalid cache file: e08e430c0039b81a359824020e18a281-x86.cache-2 /root/.fontconfig: not cleaning non-existent cache directory fc-cache: succeeded /usr/local/lib/X11/fonts/OTF: caching, new cache contents: 23 fonts, 0 dirs /var/db/fontconfig: cleaning cache directory /root/.fontconfig: not cleaning non-existent cache directory fc-cache: succeeded /usr/local/lib/X11/fonts/TTF: caching, new cache contents: 13 fonts, 0 dirs /var/db/fontconfig: cleaning cache directory /root/.fontconfig: not cleaning non-existent cache directory fc-cache: succeeded ===> Building Chrome's registry... ====================================================================== SMB issues: Network group, machine, and share browsing does not work correctly. SFTP: Only sftp access using public key authentication works. To easily setup public key authentication to "remote_host": ssh-keygen -t dsa cat ~/.ssh/id_dsa.pub | ssh remote_host "cat >> .ssh/authorized_keys" The SSH server on remote_host must allow pub key authentication. ====================================================================== Any bug reports should be addressed to the maintainers at: gecko@FreeBSD.org You may also Cc: freebsd-ports@FreeBSD.org. Please do not send bug reports to any other addresses. Please include the following information with any bug report: * Output from 'uname -a'. * Date/time stamp from www/firefox/Makefile. * Where/when did the problem occur: configuring, building, or running firefox * How can you reproduce the problem? Thank you for your help in testing and reporting bugs, and we hope you enjoy using Firefox. The Maintainers (gecko@) ====================================================================== pkg_add fixesproto-4.0.tbz skipping fixesproto-4.0, already added pkg_add font-bh-ttf-1.0.0.tbz skipping font-bh-ttf-1.0.0, already added pkg_add font-misc-ethiopic-1.0.0.tbz skipping font-misc-ethiopic-1.0.0, already added pkg_add font-misc-meltho-1.0.0_1.tbz skipping font-misc-meltho-1.0.0_1, already added pkg_add font-util-1.0.1.tbz skipping font-util-1.0.1, already added pkg_add fontconfig-2.6.0,1.tbz skipping fontconfig-2.6.0,1, already added pkg_add freetype2-2.3.9_1.tbz skipping freetype2-2.3.9_1, already added pkg_add gamin-0.1.10_3.tbz skipping gamin-0.1.10_3, already added pkg_add gconf2-2.26.2_1.tbz ./etc/CORBA missing (created) ./etc/CORBA/servers missing (created) ./etc/X11 missing (created) ./etc/X11/serverconfig missing (created) ./etc/X11/starthere missing (created) ./etc/X11/sysconfig missing (created) ./etc/gconf missing (created) ./etc/gconf/gconf.xml.defaults missing (created) ./etc/gconf/gconf.xml.mandatory missing (created) ./etc/gconf/gconf.xml.system missing (created) ./etc/gconf/schemas missing (created) ./etc/gnome missing (created) ./etc/gnome/config missing (created) ./etc/gnome-vfs-2.0 missing (created) ./etc/gnome-vfs-2.0/modules missing (created) ./etc/sound missing (created) ./etc/sound/events missing (created) ./etc/vfs missing (created) ./etc/vfs/modules missing (created) ./etc/xdg missing (created) ./etc/xdg/autostart missing (created) ./include/gconf missing (created) ./include/gdkcardimage missing (created) ./include/gnome-1.0 missing (created) ./lib/GConf missing (created) ./lib/bonobo missing (created) ./lib/bonobo/monikers missing (created) ./lib/bonobo/plugin missing (created) ./lib/gnome-vfs-2.0 missing (created) ./lib/gnome-vfs-2.0/modules missing (created) ./lib/vfs missing (created) ./lib/vfs/modules missing (created) ./libdata/bonobo missing (created) ./libdata/bonobo/servers missing (created) ./share/applets missing (created) ./share/applets/Amusements missing (created) ./share/applets/Clocks missing (created) ./share/applets/Monitors missing (created) ./share/applets/Multimedia missing (created) ./share/applets/Network missing (created) ./share/applets/Utility missing (created) ./share/application-registry missing (created) ./share/capplets missing (created) ./share/control-center missing (created) ./share/control-center/Desktop missing (created) ./share/control-center/Documents missing (created) ./share/control-center/Peripherals missing (created) ./share/control-center/Session missing (created) ./share/control-center/capplets missing (created) ./share/control-center/keybindings missing (created) ./share/control-center-2.0 missing (created) ./share/control-center-2.0/capplets missing (created) ./share/doc/libgda missing (created) ./share/games missing (created) ./share/gnome missing (created) ./share/gnome/apps missing (created) ./share/gnome/apps/Applications missing (created) ./share/gnome/apps/Audio missing (created) ./share/gnome/apps/Development missing (created) ./share/gnome/apps/Games missing (created) ./share/gnome/apps/Graphics missing (created) ./share/gnome/apps/Internet missing (created) ./share/gnome/apps/Multimedia missing (created) ./share/gnome/apps/Settings missing (created) ./share/gnome/apps/Settings/Desktop missing (created) ./share/gnome/apps/Settings/Documents missing (created) ./share/gnome/apps/Settings/Peripherals missing (created) ./share/gnome/apps/Settings/Session missing (created) ./share/gnome/apps/System missing (created) ./share/gnome/apps/Utilities missing (created) ./share/gnome/autostart missing (created) ./share/gnome/help missing (created) ./share/gnome/help/fdl missing (created) ./share/gnome/help/fdl/C missing (created) ./share/gnome/help/gpl missing (created) ./share/gnome/help/gpl/C missing (created) ./share/gnome/help/lgpl missing (created) ./share/gnome/help/lgpl/C missing (created) ./share/gnome/panel missing (created) ./share/gnome/ui missing (created) ./share/gnome/wm-properties missing (created) ./share/gnome-2.0 missing (created) ./share/gnome-2.0/ui missing (created) ./share/gnome-about missing (created) ./share/gnome-control-center missing (created) ./share/gnome-control-center/keybindings missing (created) ./share/images missing (created) ./share/mc missing (created) ./share/mc/templates missing (created) ./share/mime-info missing (created) ./share/oaf missing (created) ./share/omf missing (created) ./share/pixmaps/document-icons missing (created) ./share/pixmaps/splash missing (created) ./share/sgml/docbook/gnome-customization-0.1 missing (created) ./share/sounds missing (created) ./share/vala missing (created) ./share/vala/vapi missing (created) ./share/vfolders missing (created) ./share/xmodmap missing (created) pkg_add gd-2.0.35_1,1.tbz pkg_add gdbm-1.8.3_3.tbz skipping gdbm-1.8.3_3, already added pkg_add gegl-0.0.22_6.tbz ==== Note that some of the standard libraries are provided as separate ports since they require extra dependencies: converters/ruby-iconv iconv module databases/ruby-gdbm: GDBM module x11-toolkits/ruby-tk: Tcl/Tk modules japanese/ruby-tk: Tcl/Tk modules for Japanized Tcl/Tk lang/ruby-mode.el: Emacs lisp modules Install them as occasion demands. ==== - ------------------------------------------------------------------------------ Your SDL library has been built with libvgl support, which means that you can run almost any SDL application straight on your console (VESA 2.0 compatible videocard is required). To do this you have to load the vesa kernel module or enable it in your kernel, and set environment variable "SDL_VIDEODRIVER=vgl". - ------------------------------------------------------------------------------ pkg_add getopt-1.1.4_1.tbz pkg_add gettext-0.17_1.tbz skipping gettext-0.17_1, already added pkg_add gimp-app-2.6.6_3,1.tbz pkg_add gio-fam-backend-2.20.5.tbz skipping gio-fam-backend-2.20.5, already added pkg_add glib-2.20.5.tbz skipping glib-2.20.5, already added pkg_add gmake-3.81_3.tbz pkg_add gnome-doc-utils-0.16.1_1.tbz skipping gnome-doc-utils-0.16.1_1, already added pkg_add gnome-keyring-2.26.3_1.tbz skipping gnome-keyring-2.26.3_1, already added pkg_add gnome-mime-data-2.18.0_3.tbz skipping gnome-mime-data-2.18.0_3, already added pkg_add gnome-mount-0.8_3.tbz skipping gnome-mount-0.8_3, already added pkg_add gnome-vfs-2.24.1_1.tbz skipping gnome-vfs-2.24.1_1, already added pkg_add gnome_subr-1.0.tbz skipping gnome_subr-1.0, already added pkg_add gnomehier-2.3_12.tbz skipping gnomehier-2.3_12, already added pkg_add gnutls-2.8.3.tbz skipping gnutls-2.8.3, already added pkg_add gpac-libgpac-0.4.5_2,1.tbz skipping gpac-libgpac-0.4.5_2,1, already added pkg_add graphviz-2.24.0_1.tbz skipping graphviz-2.24.0_1, already added pkg_add gstreamer-0.10.24.tbz skipping gstreamer-0.10.24, already added pkg_add gstreamer-plugins-0.10.24,3.tbz skipping gstreamer-plugins-0.10.24,3, already added pkg_add gstreamer-plugins-gnomevfs-0.10.24,3.tbz skipping gstreamer-plugins-gnomevfs-0.10.24,3, already added pkg_add gtk-2.16.6.tbz skipping gtk-2.16.6, already added pkg_add gtk-engines2-2.18.2_1.tbz skipping gtk-engines2-2.18.2_1, already added pkg_add gvfs-1.2.3_2.tbz skipping gvfs-1.2.3_2, already added pkg_add hal-0.5.11_26.tbz skipping hal-0.5.11_26, already added pkg_add hicolor-icon-theme-0.10_2.tbz skipping hicolor-icon-theme-0.10_2, already added pkg_add icu-3.8.1_2.tbz skipping icu-3.8.1_2, already added pkg_add ilmbase-1.0.1_1.tbz skipping ilmbase-1.0.1_1, already added pkg_add inputproto-1.5.0.tbz skipping inputproto-1.5.0, already added pkg_add iso-codes-3.10.3.tbz skipping iso-codes-3.10.3, already added pkg_add iso8879-1986_2.tbz skipping iso8879-1986_2, already added pkg_add jasper-1.900.1_8.tbz skipping jasper-1.900.1_8, already added pkg_add jpeg-7.tbz skipping jpeg-7, already added pkg_add kbproto-1.0.3.tbz skipping kbproto-1.0.3, already added pkg_add lcms-1.18a_1,1.tbz skipping lcms-1.18a_1,1, already added pkg_add libGL-7.4.4.tbz skipping libGL-7.4.4, already added pkg_add libGLU-7.4.4.tbz skipping libGLU-7.4.4, already added pkg_add libICE-1.0.4_1,1.tbz skipping libICE-1.0.4_1,1, already added pkg_add libIDL-0.8.13.tbz skipping libIDL-0.8.13, already added pkg_add libSM-1.1.0_1,1.tbz skipping libSM-1.1.0_1,1, already added pkg_add libX11-1.2.1_1,1.tbz skipping libX11-1.2.1_1,1, already added pkg_add libXau-1.0.4.tbz skipping libXau-1.0.4, already added pkg_add libXaw-1.0.5_1,1.tbz skipping libXaw-1.0.5_1,1, already added pkg_add libXcomposite-0.4.0,1.tbz skipping libXcomposite-0.4.0,1, already added pkg_add libXcursor-1.1.9_1.tbz skipping libXcursor-1.1.9_1, already added pkg_add libXdamage-1.1.1.tbz skipping libXdamage-1.1.1, already added pkg_add libXdmcp-1.0.2_1.tbz skipping libXdmcp-1.0.2_1, already added pkg_add libXext-1.0.5,1.tbz skipping libXext-1.0.5,1, already added pkg_add libXfixes-4.0.3_1.tbz skipping libXfixes-4.0.3_1, already added pkg_add libXft-2.1.13.tbz skipping libXft-2.1.13, already added pkg_add libXi-1.2.1,1.tbz skipping libXi-1.2.1,1, already added pkg_add libXinerama-1.0.3,1.tbz skipping libXinerama-1.0.3,1, already added pkg_add libXmu-1.0.4,1.tbz skipping libXmu-1.0.4,1, already added pkg_add libXp-1.0.0,1.tbz skipping libXp-1.0.0,1, already added pkg_add libXpm-3.5.7.tbz skipping libXpm-3.5.7, already added pkg_add libXrandr-1.3.0.tbz skipping libXrandr-1.3.0, already added pkg_add libXrender-0.9.4_1.tbz skipping libXrender-0.9.4_1, already added pkg_add libXt-1.0.5_1.tbz skipping libXt-1.0.5_1, already added pkg_add libXv-1.0.4,1.tbz skipping libXv-1.0.4,1, already added pkg_add libXxf86vm-1.0.2.tbz skipping libXxf86vm-1.0.2, already added pkg_add libart_lgpl-2.3.20,1.tbz skipping libart_lgpl-2.3.20,1, already added pkg_add libcddb-1.3.0.tbz skipping libcddb-1.3.0, already added pkg_add libcdio-0.78.2_2.tbz skipping libcdio-0.78.2_2, already added pkg_add libcroco-0.6.2.tbz skipping libcroco-0.6.2, already added pkg_add libdaemon-0.12.tbz skipping libdaemon-0.12, already added pkg_add libdrm-2.4.12.tbz skipping libdrm-2.4.12, already added pkg_add libexif-0.6.17.tbz skipping libexif-0.6.17, already added pkg_add libfontenc-1.0.4.tbz skipping libfontenc-1.0.4, already added pkg_add libgcrypt-1.4.4.tbz skipping libgcrypt-1.4.4, already added pkg_add libgpg-error-1.7.tbz skipping libgpg-error-1.7, already added pkg_add libgphoto2-2.4.7.tbz skipping libgphoto2-2.4.7, already added pkg_add libgsf-1.14.15_1.tbz skipping libgsf-1.14.15_1, already added pkg_add libiconv-1.13.1.tbz skipping libiconv-1.13.1, already added pkg_add libltdl-2.2.6a.tbz skipping libltdl-2.2.6a, already added pkg_add libmng-1.0.10_1.tbz skipping libmng-1.0.10_1, already added pkg_add libnotify-0.4.5_1.tbz skipping libnotify-0.4.5_1, already added pkg_add libogg-1.1.4,4.tbz skipping libogg-1.1.4,4, already added pkg_add liboil-0.3.16.tbz skipping liboil-0.3.16, already added pkg_add libopenraw-0.0.8_1.tbz skipping libopenraw-0.0.8_1, already added pkg_add libproxy-0.2.3.tbz skipping libproxy-0.2.3, already added pkg_add libpthread-stubs-0.1.tbz skipping libpthread-stubs-0.1, already added pkg_add librsvg2-2.26.0_1.tbz skipping librsvg2-2.26.0_1, already added pkg_add libsoup-2.26.3_2.tbz skipping libsoup-2.26.3_2, already added pkg_add libspiro-20071029.tbz skipping libspiro-20071029, already added pkg_add libtasn1-2.3.tbz skipping libtasn1-2.3, already added pkg_add libtheora-1.0_1.tbz skipping libtheora-1.0_1, already added pkg_add libusb-0.1.12_4.tbz skipping libusb-0.1.12_4, already added pkg_add libvolume_id-0.81.1.tbz skipping libvolume_id-0.81.1, already added pkg_add libvorbis-1.2.3,3.tbz skipping libvorbis-1.2.3,3, already added pkg_add libwmf-0.2.8.4_4.tbz skipping libwmf-0.2.8.4_4, already added pkg_add libxcb-1.4.tbz skipping libxcb-1.4, already added pkg_add libxml2-2.7.3_1.tbz skipping libxml2-2.7.3_1, already added pkg_add libxslt-1.1.24_2.tbz skipping libxslt-1.1.24_2, already added pkg_add lua-5.1.4.tbz skipping lua-5.1.4, already added pkg_add mkfontdir-1.0.4.tbz skipping mkfontdir-1.0.4, already added pkg_add mkfontscale-1.0.6.tbz skipping mkfontscale-1.0.6, already added pkg_add nspr-4.8.tbz skipping nspr-4.8, already added pkg_add nss-3.11.9_3.tbz skipping nss-3.11.9_3, already added pkg_add pango-1.24.5.tbz skipping pango-1.24.5, already added pkg_add pciids-20090807.tbz skipping pciids-20090807, already added pkg_add pcre-7.9.tbz skipping pcre-7.9, already added pkg_add perl-5.8.9_3.tbz skipping perl-5.8.9_3, already added pkg_add pixman-0.15.4.tbz skipping pixman-0.15.4, already added pkg_add pkg-config-0.23_1.tbz skipping pkg-config-0.23_1, already added pkg_add png-1.2.38.tbz skipping png-1.2.38, already added pkg_add policykit-0.9_5.tbz skipping policykit-0.9_5, already added pkg_add policykit-gnome-0.9.2_2.tbz skipping policykit-gnome-0.9.2_2, already added pkg_add poppler-0.10.6_1.tbz skipping poppler-0.10.6_1, already added pkg_add poppler-data-0.2.1.tbz skipping poppler-data-0.2.1, already added pkg_add poppler-gtk-0.10.6_1.tbz skipping poppler-gtk-0.10.6_1, already added pkg_add popt-1.14.tbz skipping popt-1.14, already added pkg_add printproto-1.0.4.tbz skipping printproto-1.0.4, already added pkg_add py26-libxml2-2.7.3.tbz skipping py26-libxml2-2.7.3, already added pkg_add python26-2.6.2_2.tbz skipping python26-2.6.2_2, already added pkg_add randrproto-1.3.0.tbz skipping randrproto-1.3.0, already added pkg_add rarian-0.8.1.tbz skipping rarian-0.8.1, already added pkg_add renderproto-0.9.3.tbz skipping renderproto-0.9.3, already added pkg_add ruby-1.8.7.160_4,1.tbz skipping ruby-1.8.7.160_4,1, already added pkg_add samba-libsmbclient-3.0.36.tbz skipping samba-libsmbclient-3.0.36, already added pkg_add schroedinger-1.0.7_2.tbz skipping schroedinger-1.0.7_2, already added pkg_add sdl-1.2.13_4,2.tbz skipping sdl-1.2.13_4,2, already added pkg_add shared-mime-info-0.60_1.tbz skipping shared-mime-info-0.60_1, already added pkg_add sqlite3-3.6.14.2.tbz skipping sqlite3-3.6.14.2, already added pkg_add tiff-3.8.2_4.tbz skipping tiff-3.8.2_4, already added pkg_add videoproto-2.2.2.tbz skipping videoproto-2.2.2, already added pkg_add webkit-gtk2-1.0.1_8.tbz skipping webkit-gtk2-1.0.1_8, already added pkg_add x264-0.0.20081218.tbz skipping x264-0.0.20081218, already added pkg_add xcb-proto-1.5.tbz skipping xcb-proto-1.5, already added pkg_add xcb-util-0.3.5.tbz skipping xcb-util-0.3.5, already added pkg_add xextproto-7.0.5.tbz skipping xextproto-7.0.5, already added pkg_add xf86vidmodeproto-2.2.2.tbz skipping xf86vidmodeproto-2.2.2, already added pkg_add xineramaproto-1.1.2.tbz skipping xineramaproto-1.1.2, already added pkg_add xmlcatmgr-2.2.tbz skipping xmlcatmgr-2.2, already added pkg_add xmlcharent-0.3_2.tbz skipping xmlcharent-0.3_2, already added pkg_add xorg-fonts-truetype-7.4.tbz skipping xorg-fonts-truetype-7.4, already added pkg_add xproto-7.0.15.tbz skipping xproto-7.0.15, already added pkg_add xvid-1.2.2_1,1.tbz skipping xvid-1.2.2_1,1, already added pkg_add zip-3.0.tbz skipping zip-3.0, already added ===> gimp-help-2.4.2_1 depends on file: /usr/local/share/xsl/docbook/xhtml/chunk.xsl - found ===> gimp-help-2.4.2_1 depends on executable: gmake - found ===> gimp-help-2.4.2_1 depends on shared library: gimp-2.0 - found ===> Configuring for gimp-help-2.4.2_1 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... nawk checking whether gmake sets $(MAKE)... yes checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking whether gmake sets $(MAKE)... (cached) yes checking whether gmake is GNU make... yes checking for xsltproc... /usr/local/bin/xsltproc checking for xmllint... /usr/local/bin/xmllint checking for dblatex... no configure: WARNING: cannot find dblatex(1), PDF generation disabled checking for docbook2odf... no configure: WARNING: cannot find docbook2odf(1), ODF generation disabled checking for xml2po... /usr/local/bin/xml2po checking for pkg-config... /usr/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GIMP... yes configure: creating ./config.status config.status: creating Makefile config.status: creating quickreference/Makefile config.status: creating omf/gimp-C.omf config.status: creating stylesheets/plainhtml.xsl config.status: creating stylesheets/htmlalternate.xsl Rebuild the help files: yes Languages: de en es fr it ko nl no pl ru sv Installation prefix: /usr/local/share/gimp ===> Building for gimp-help-2.4.2_1 Making all in quickreference gmake[1]: Entering directory `/work/a/ports/graphics/gimp-help/work/gimp-help-2.4.2/quickreference' .././install-sh -c -d xml /usr/local/bin/xml2po -p po/de.po ./gimp-keys.xml > xml/gimp-keys-de.xml .././install-sh -c -d svg /usr/local/bin/xsltproc \ ./stylesheets/keys-svg.xsl \ xml/gimp-keys-de.xml \ > svg/gimp-keys-de.svg .././install-sh -c -d xml /usr/local/bin/xml2po -p po/gimp-keys.pot ./gimp-keys.xml > xml/gimp-keys-en.xml .././install-sh -c -d svg /usr/local/bin/xsltproc \ ./stylesheets/keys-svg.xsl \ xml/gimp-keys-en.xml \ > svg/gimp-keys-en.svg .././install-sh -c -d xml /usr/local/bin/xml2po -p po/fr.po ./gimp-keys.xml > xml/gimp-keys-fr.xml .././install-sh -c -d svg /usr/local/bin/xsltproc \ ./stylesheets/keys-svg.xsl \ xml/gimp-keys-fr.xml \ > svg/gimp-keys-fr.svg .././install-sh -c -d xml /usr/local/bin/xml2po -p po/it.po ./gimp-keys.xml > xml/gimp-keys-it.xml .././install-sh -c -d svg /usr/local/bin/xsltproc \ ./stylesheets/keys-svg.xsl \ xml/gimp-keys-it.xml \ > svg/gimp-keys-it.svg .././install-sh -c -d xml /usr/local/bin/xml2po -p po/ko.po ./gimp-keys.xml > xml/gimp-keys-ko.xml .././install-sh -c -d svg /usr/local/bin/xsltproc \ ./stylesheets/keys-svg.xsl \ xml/gimp-keys-ko.xml \ > svg/gimp-keys-ko.svg .././install-sh -c -d xml /usr/local/bin/xml2po -p po/ru.po ./gimp-keys.xml > xml/gimp-keys-ru.xml .././install-sh -c -d svg /usr/local/bin/xsltproc \ ./stylesheets/keys-svg.xsl \ xml/gimp-keys-ru.xml \ > svg/gimp-keys-ru.svg .././install-sh -c -d xml /usr/local/bin/xml2po -p po/sv.po ./gimp-keys.xml > xml/gimp-keys-sv.xml .././install-sh -c -d svg /usr/local/bin/xsltproc \ ./stylesheets/keys-svg.xsl \ xml/gimp-keys-sv.xml \ > svg/gimp-keys-sv.svg .././install-sh -c -d docbook /usr/local/bin/xsltproc \ ./stylesheets/keys-docbook.xsl \ xml/gimp-keys-de.xml \ > docbook/gimp-keys-de.xml .././install-sh -c -d docbook /usr/local/bin/xsltproc \ ./stylesheets/keys-docbook.xsl \ xml/gimp-keys-en.xml \ > docbook/gimp-keys-en.xml .././install-sh -c -d docbook /usr/local/bin/xsltproc \ ./stylesheets/keys-docbook.xsl \ xml/gimp-keys-fr.xml \ > docbook/gimp-keys-fr.xml .././install-sh -c -d docbook /usr/local/bin/xsltproc \ ./stylesheets/keys-docbook.xsl \ xml/gimp-keys-it.xml \ > docbook/gimp-keys-it.xml .././install-sh -c -d docbook /usr/local/bin/xsltproc \ ./stylesheets/keys-docbook.xsl \ xml/gimp-keys-ko.xml \ > docbook/gimp-keys-ko.xml .././install-sh -c -d docbook /usr/local/bin/xsltproc \ ./stylesheets/keys-docbook.xsl \ xml/gimp-keys-ru.xml \ > docbook/gimp-keys-ru.xml .././install-sh -c -d docbook /usr/local/bin/xsltproc \ ./stylesheets/keys-docbook.xsl \ xml/gimp-keys-sv.xml \ > docbook/gimp-keys-sv.xml rm xml/gimp-keys-fr.xml xml/gimp-keys-sv.xml xml/gimp-keys-ru.xml xml/gimp-keys-de.xml xml/gimp-keys-ko.xml xml/gimp-keys-it.xml gmake[1]: Leaving directory `/work/a/ports/graphics/gimp-help/work/gimp-help-2.4.2/quickreference' gmake[1]: Entering directory `/work/a/ports/graphics/gimp-help/work/gimp-help-2.4.2' Profiling XML for: de Validating XML for: de Profiling XML for: en Validating XML for: en Profiling XML for: es Validating XML for: es Profiling XML for: fr Validating XML for: fr Profiling XML for: it Validating XML for: it Profiling XML for: ko Validating XML for: ko Profiling XML for: nl Validating XML for: nl Profiling XML for: no Validating XML for: no Profiling XML for: pl Validating XML for: pl Profiling XML for: ru Validating XML for: ru Profiling XML for: sv Validating XML for: sv Creating HTML for: de Writing gimp-xrefs.xml for book(gimp-main) Writing pr01.html for preface Writing gimp-introduction-whats-new.html for sect1(gimp-introduction-whats-new) Writing introduction.html for chapter(introduction) Writing gimp-concepts-setup.html for sect1(gimp-concepts-setup) Writing gimp-fire-up.html for chapter(gimp-fire-up) Writing gimp-image-window.html for sect2(gimp-image-window) Writing gimp-concepts-docks.html for sect2(gimp-concepts-docks) Writing gimp-concepts-usage.html for sect1(gimp-concepts-usage) Writing gimp-concepts-undo.html for sect1(gimp-concepts-undo) Writing gimp-tutorial-quickie-scale.html for sect2(gimp-tutorial-quickie-scale) Writing gimp-tutorial-quickie-jpeg.html for sect2(gimp-tutorial-quickie-jpeg) Writing gimp-tutorial-quickie-crop.html for sect2(gimp-tutorial-quickie-crop) Writing gimp-tutorial-quickie-info.html for sect2(gimp-tutorial-quickie-info) Writing gimp-tutorial-quickie-change-mode.html for sect2(gimp-tutorial-quickie-change-mode) Writing gimp-tutorial-quickie-flip.html for sect2(gimp-tutorial-quickie-flip) Writing gimp-tutorial-quickie-rotate.html for sect2(gimp-tutorial-quickie-rotate) Writing gimp-tutorial-quickies.html for sect1(gimp-tutorial-quickies) Writing ch03s05s02.html for sect2 Writing gimp-tutorial-straight-lines.html for sect1(gimp-tutorial-straight-lines) Writing gimp-first-steps.html for chapter(gimp-first-steps) Writing gimp-getting-unstuck.html for chapter(gimp-getting-unstuck) Writing pt01.html for part Writing gimp-using-fileformats-creating.html for sect1(gimp-using-fileformats-creating) Writing ch05s03s02.html for sect2 Writing ch05s03s03.html for sect2 Writing ch05s03s04.html for sect2 Writing ch05s03s05.html for sect2 Writing ch05s03s06.html for sect2 Writing ch05s03s07.html for sect2 Writing gimp-using-fileformats-opening.html for sect1(gimp-using-fileformats-opening) Writing gimp-images-in.html for chapter(gimp-images-in) Writing gimp-using-web-reducing-file-size.html for sect2(gimp-using-web-reducing-file-size) Writing gimp-using-web-transparency.html for sect2(gimp-using-web-transparency) Writing gimp-using-web.html for sect1(gimp-using-web) Writing gimp-images-out.html for chapter(gimp-images-out) Writing gimp-using-selections-free-select.html for sect2(gimp-using-selections-free-select) Writing gimp-using-selections.html for sect1(gimp-using-selections) Writing ch07s03s02.html for sect2 Writing gimp-image-window-qmask-button.html for sect1(gimp-image-window-qmask-button) Writing gimp-using-quickmask.html for sect1(gimp-using-quickmask) Writing ch07s05s02.html for sect2 Writing gimp-using-paths-transforming.html for sect2(gimp-using-paths-transforming) Writing gimp-using-paths-stroking.html for sect2(gimp-using-paths-stroking) Writing ch07s05s05.html for sect2 Writing ch07s05s06.html for sect2 Writing gimp-using-paths.html for sect1(gimp-using-paths) Writing gimp-concepts-brushes.html for sect1(gimp-concepts-brushes) Writing gimp-using-brushes.html for sect1(gimp-using-brushes) Writing gimp-using-animated-brushes.html for sect1(gimp-using-animated-brushes) Writing gimp-using-variable-size-brush-creating.html for sect2(gimp-using-variable-size-brush-creating) Writing gimp-using-variable-size-brush.html for sect1(gimp-using-variable-size-brush) Writing gimp-concepts-gradients.html for sect1(gimp-concepts-gradients) Writing gimp-concepts-patterns.html for sect1(gimp-concepts-patterns) Writing gimp-concepts-palettes.html for sect1(gimp-concepts-palettes) Writing gimp-using-rectangular.html for sect2(gimp-using-rectangular) Writing gimp-using-simpleobjects.html for sect1(gimp-using-simpleobjects) Writing gimp-painting.html for chapter(gimp-painting) Writing gimp-concepts-layer-modes.html for sect1(gimp-concepts-layer-modes) Writing gimp-using-layers.html for sect1(gimp-using-layers) Writing gimp-concepts-text.html for sect1(gimp-concepts-text) Writing gimp-using-fonts.html for sect2(gimp-using-fonts) Writing font-problems.html for sect2(font-problems) Writing gimp-using-text.html for sect1(gimp-using-text) Writing gimp-image-combining.html for chapter(gimp-image-combining) Writing gimp-imaging-photos.html for chapter(gimp-imaging-photos) Writing gimp-imaging-color-management.html for chapter(gimp-imaging-color-management) Writing ch11s02s02.html for sect2 Writing gimp-concepts-image-grid.html for sect1(gimp-concepts-image-grid) Writing gimp-using-grid.html for sect1(gimp-using-grid) Writing gimp-using-setup-tile-cache.html for sect1(gimp-using-setup-tile-cache) Writing gimp-concepts-shortcuts.html for sect1(gimp-concepts-shortcuts) Writing gimp-using-docks-tab-close.html for sect2(gimp-using-docks-tab-close) Writing gimp-using-docks.html for sect1(gimp-using-docks) Writing using-customize-splashscreen.html for sect1(using-customize-splashscreen) Writing gimp-pimping.html for chapter(gimp-pimping) Writing install-script-fu.html for sect2(install-script-fu) Writing ch12s02s03.html for sect2 Writing ch12s02s04.html for sect2 Writing standalone-script-fu.html for sect2(standalone-script-fu) Writing ch12s02s06.html for sect2 Writing gimp-concepts-script-fu.html for sect1(gimp-concepts-script-fu) Writing gimp-using-script-fu-tutorial-identifier.html for sect2(gimp-using-script-fu-tutorial-identifier) Writing gimp-using-script-fu-tutorial-lists.html for sect2(gimp-using-script-fu-tutorial-lists) Writing gimp-using-script-fu-tutorial-first-script.html for sect2(gimp-using-script-fu-tutorial-first-script) Writing gimp-using-script-fu-tutorial-script.html for sect2(gimp-using-script-fu-tutorial-script) Writing gimp-using-script-fu-tutorial-extending-text-box.html for sect2(gimp-using-script-fu-tutorial-extending-text-box) Writing gimp-using-script-fu-tutorial-result.html for sect2(gimp-using-script-fu-tutorial-result) Writing gimp-using-script-fu-tutorial.html for sect1(gimp-using-script-fu-tutorial) Writing gimp-scripting.html for chapter(gimp-scripting) Writing pt02.html for part gmake[1]: *** [html/de/index.html] Killed: 9 gmake[1]: Leaving directory `/work/a/ports/graphics/gimp-help/work/gimp-help-2.4.2' gmake: *** [all-recursive] Error 1 *** Error code 1 Stop in /a/ports/graphics/gimp-help. ================================================================ build of /usr/ports/graphics/gimp-help ended at Wed Sep 9 19:37:50 UTC 2009 - ----- End forwarded message ----- - -- +-----------------------+-------------------------------+ | PGP : 0xB1E6FCE9 | Jabber : miwi(at)BSDCrew.de | | Skype : splash_111 | Mail : miwi(at)FreeBSD.org | +-----------------------+-------------------------------+ | Mess with the Best, Die like the Rest! | +-----------------------+-------------------------------+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkqoEFIACgkQdLJIhLHm/OkQPgCdFItAHDHyyeqLr9qgLH1ocNz4 JNAAoJgLLKalEQMuItTtI9DvrRn7SIiZ =4qpq -----END PGP SIGNATURE----- From mezz7 at cox.net Wed Sep 9 22:21:36 2009 From: mezz7 at cox.net (Jeremy Messenger) Date: Wed Sep 9 22:21:42 2009 Subject: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo In-Reply-To: <200909092010.n89KA42P054870@freefall.freebsd.org> References: <200909092010.n89KA42P054870@freefall.freebsd.org> Message-ID: On Wed, 09 Sep 2009 15:10:04 -0500, Scot Hetzel wrote: > The following reply was made to PR ports/138665; it has been noted by > GNATS. > > From: Scot Hetzel > To: Randy Belk > Cc: freebsd-gnats-submit@freebsd.org > Subject: Re: amd64/138665: Build fails of x11-toolkits/py-gtk2, > dependent on > wrong version of cairo > Date: Wed, 9 Sep 2009 15:00:45 -0500 > > On Wed, Sep 9, 2009 at 2:42 PM, Randy Belk > wrote: > > This is the error I get when compiling. This is actually a > > graphics/py-cairo issue not a x11-toolkits/py-gtk2 issue. > > Graphics/py-cairo is dependent on Python 2.6 and can not run with 2.5! > > > > =3D=3D=3D> =A0Extracting for py25-gtk-2.14.1_1 > > =3D> MD5 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. > > =3D> SHA256 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. > > =3D=3D=3D> =A0Patching for py25-gtk-2.14.1_1 > > =3D=3D=3D> =A0Applying FreeBSD patches for py25-gtk-2.14.1_1 > > =3D=3D=3D> =A0 py25-gtk-2.14.1_1 depends on file: > > /usr/local/lib/python2.5/site-packages/cairo/__init__.py - not found > > =3D=3D=3D> =A0 =A0Verifying install for > > /usr/local/lib/python2.5/site-packages/cairo/__init__.py in > > /usr/ports/graphics/py-cairo > > =3D=3D=3D> =A0py25-cairo-1.8.8 needs Python 2.6 at least. But you > specifi= > ed 2.5. > > *** Error code 1 > > > > Stop in /usr/ports/graphics/py-cairo. > > *** Error code 1 > > > > Stop in /usr/ports/x11-toolkits/py-gtk2. > > > > =3D=3D=3D>>> make failed for x11-toolkits/py-gtk2 > > =3D=3D=3D>>> Aborting update > > > One option to allow py-cairo to work with python < 2.6 would be to do > the following: > 1. create a repo copy of py-cairo to py-cairo-old > 2. down grade py-cairo-old to version 1.8.2 > - which was the last version we had working with python 2.5. > 3. Set py-cairo-old to only build with python < 2.6 No thanks, all users should be upgrade their Python to 2.6. Cheers, Mezz > Finally, all ports that have a dependancy on graphics/py-cairo could > be changed as follows: > .if ${PYTHON_SUFFIX} < 26 > BUILD_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphic= > s/py-cairo-old > RUN_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphics/= > py-cairo-old > .else > BUILD_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphic= > s/py-cairo > RUN_DEPENDS=3D ${PYTHON_SITELIBDIR}/cairo/__init__.py:${PORTSDIR}/graphics/= > py-cairo > .fi > Scot -- mezz7@cox.net - mezz@FreeBSD.org FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - gnome@FreeBSD.org From miwi at FreeBSD.org Wed Sep 9 22:30:53 2009 From: miwi at FreeBSD.org (Martin Wilke) Date: Wed Sep 9 22:31:00 2009 Subject: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo In-Reply-To: <200909092010.n89KA6Z2054901@freefall.freebsd.org> References: <200909092010.n89KA6Z2054901@freefall.freebsd.org> Message-ID: <20090909223051.GM98067@bsdcrew.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wed, Sep 09, 2009 at 08:10:06PM +0000, Randy Belk wrote: > The following reply was made to PR ports/138665; it has been noted by GNATS. > > From: Randy Belk > To: Scot Hetzel > Cc: freebsd-gnats-submit@freebsd.org > Subject: Re: amd64/138665: Build fails of x11-toolkits/py-gtk2, dependent on > wrong version of cairo > Date: Wed, 9 Sep 2009 14:42:23 -0500 > > This is the error I get when compiling. This is actually a > graphics/py-cairo issue not a x11-toolkits/py-gtk2 issue. > Graphics/py-cairo is dependent on Python 2.6 and can not run with 2.5! > > ===> Extracting for py25-gtk-2.14.1_1 > => MD5 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. > => SHA256 Checksum OK for gnome2/pygtk-2.14.1.tar.bz2. > ===> Patching for py25-gtk-2.14.1_1 > ===> Applying FreeBSD patches for py25-gtk-2.14.1_1 > ===> py25-gtk-2.14.1_1 depends on file: > /usr/local/lib/python2.5/site-packages/cairo/__init__.py - not found > ===> Verifying install for > /usr/local/lib/python2.5/site-packages/cairo/__init__.py in > /usr/ports/graphics/py-cairo > ===> py25-cairo-1.8.8 needs Python 2.6 at least. But you specified 2.5. > *** Error code 1 > > Stop in /usr/ports/graphics/py-cairo. > *** Error code 1 > > Stop in /usr/ports/x11-toolkits/py-gtk2. > > ===>>> make failed for x11-toolkits/py-gtk2 > ===>>> Aborting update > > Please read ports/UPDATING how you can update python right. > > -- > - Amiga, The Computer for the creative Mind! > - UNIX is basically a simple operating system, but you have to be a > genius to understand the simplicity. > - People who hate Microsoft Windows use Linux but people who love UNIX use BSD. > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" - -- +-----------------------+-------------------------------+ | PGP : 0xB1E6FCE9 | Jabber : miwi(at)BSDCrew.de | | Skype : splash_111 | Mail : miwi(at)FreeBSD.org | +-----------------------+-------------------------------+ | Mess with the Best, Die like the Rest! | +-----------------------+-------------------------------+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkqoLJsACgkQdLJIhLHm/OmnXgCgll7LK66Ou7AJ+vqiErj/PYP5 GpsAoLBo3nhCcuL9V3eDibhoarW4T+AJ =Xm9L -----END PGP SIGNATURE----- From marcus at marcuscom.com Thu Sep 10 04:39:42 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Thu Sep 10 04:39:49 2009 Subject: gtk20 always replace gtk.immodules In-Reply-To: <20090909181301.GB66062@bluepex.com> References: <20090909181301.GB66062@bluepex.com> Message-ID: <1252557583.97925.7.camel@shumai.marcuscom.com> On Wed, 2009-09-09 at 15:13 -0300, Renato Botelho wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hello, > > My default environment language is en_US, but I need ? char working properly > since my first language is pt_BR, I had problems in the past with deadkeys > on gtk windows and c was show with an acute accent instead of cedilla. > > When i researched in the past I found a solution adding en on following > line: > > "cedilla" "Cedilla" "gtk20" "/usr/local/share/locale" "az:ca:co:en:fr:gv:oc:pt:sq:tr:wa" > > on /usr/local/etc/gtk-2.0/gtk.immodules, but this file is replaced every > time i update gtk port, is it expected? > > A lot of ports respect files under /usr/local/etc when they are changed by > user, what do you think if gtk port does the same? > > If you say yes, i can try to make a patch for this. Absolutely. A patch would be welcome. Joe > > Thanks > - -- > Renato Botelho > > GnuPG Key: http://www.FreeBSD.org/~garga/pubkey.asc > > Riches cover a multitude of woes. > -- Menander > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v2.0.13 (FreeBSD) > > iEYEARECAAYFAkqn8C0ACgkQ6CRbiSJE7am4YACfc2MwGXwd/QUNDDcqRXKEYBV8 > IGIAoICX8l/GFyfF2o9Ko9rTFygLQBET > =EN1m > -----END PGP SIGNATURE----- > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090910/fe83598b/attachment.pgp From mailing at ekomedya.com Thu Sep 10 15:18:34 2009 From: mailing at ekomedya.com (=?utf-8?Q?Eko_Bilgisayar_ve_=C4=B0leti=C5=9Fim_Hizmetleri_Ltd=2E_=C5=9Eti?=) Date: Thu Sep 10 15:19:19 2009 Subject: Turkey Calling You To Visit - The Trade SHOW- In Las Vegas Message-ID: <430800152c3b3df1dad12873a406b950@localhost.localdomain> [http://www.turkeycalling.us] [http://www.turkeycalling.us] [http://www.turkeycalling.us] [http://www.turkeycalling.us/turkey-fam/turkeyfam.htm] Global Access Travel invites you to the Tradeshow in Las Vegas on September 13-15, 2009. Please visit us to get more information about our organization and services at our booth. If you fill the registration form or leave the business card when you visit us at our booth, you might be lucky visitor who is going to win our daily draw prize; Free inspection trip to Turkey. Yasal Uyar?; Bu e-posta, sadece adreste belirtilen kisi veya kurulusun kullanimini hedeflemekte olup,mesajda yer alan bilgiler kisiye ozel ve gizli olabilir, yasalar ya da anlasmalar geregi ?c?nc? kisiler ile paylasilmasi m?mk?n olmayabilir.Mesaji alan kisi, mesajin g?nderilmek istendigi kisi veya kurulus degilse,bu mesaji yaymak,dagitmak veya kopyalamak yasaktir Mesaj tarafiniza yanlislikla ulasmissa l?tfen mesaji geri g?nderiniz ve sisteminizden siliniz. Global Access Travel bu mesajin icerigi ile ilgili olarak hicbir hukuksal sorumlulugu kabul etmez Disclaimer This e-mail communication is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and that may not be made public by law or agreement. If the recipient of this message is not the intended recipient or entity, you are hereby notified that any further dissemination, distribution or copying of this information is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete it from your system. The Global Access Traveldoes not accept legal responsibility for the contents of this message. Yasal Uyar?; Bu e-posta, sadece adreste belirtilen kisi veya kurulusun kullanimini hedeflemekte olup,mesajda yer alan bilgiler kisiye ozel ve gizli olabilir, yasalar ya da anlasmalar geregi ?c?nc? kisiler ile paylasilmasi m?mk?n olmayabilir.Mesaji alan kisi, mesajin g?nderilmek istendigi kisi veya kurulus degilse,bu mesaji yaymak,dagitmak veya kopyalamak yasaktir Mesaj tarafiniza yanlislikla ulasmissa l?tfen mesaji geri g?nderiniz ve sisteminizden siliniz. Global Access Travel bu mesajin icerigi ile ilgili olarak hicbir hukuksal sorumlulugu kabul etmez Disclaimer This e-mail communication is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and that may not be made public by law or agreement. If the recipient of this message is not the intended recipient or entity, you are hereby notified that any further dissemination, distribution or copying of this information is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete it from your system. The Global Access Traveldoes not accept legal responsibility for the contents of this message. Yasal Uyar?; Bu e-posta, sadece adreste belirtilen kisi veya kurulusun kullanimini hedeflemekte olup,mesajda yer alan bilgiler kisiye ozel ve gizli olabilir, yasalar ya da anlasmalar geregi ?c?nc? kisiler ile paylasilmasi m?mk?n olmayabilir.Mesaji alan kisi, mesajin g?nderilmek istendigi kisi veya kurulus degilse,bu mesaji yaymak,dagitmak veya kopyalamak yasaktir Mesaj tarafiniza yanlislikla ulasmissa l?tfen mesaji geri g?nderiniz ve sisteminizden siliniz. Global Access Travel bu mesajin icerigi ile ilgili olarak hicbir hukuksal sorumlulugu kabul etmez Disclaimer This e-mail communication is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and that may not be made public by law or agreement. If the recipient of this message is not the intended recipient or entity, you are hereby notified that any further dissemination, distribution or copying of this information is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete it from your system. The Global Access Traveldoes not accept legal responsibility for the contents of this message. This message was sent by: TURKEY CALLING YOU TO VISIT "THE TRADE SHOW" IN LAS VEGAS, N?zhetiye Cad, istanbul, Besiktas 34357, Turkey Manage your subscription: http://app.icontact.com/icp/mmail-mprofile.pl?r=47622550&l=82253&s=5VLS&m=587775&c=305227 From shildret at scotth.emsphone.com Fri Sep 11 16:41:48 2009 From: shildret at scotth.emsphone.com (Scott T. Hildreth) Date: Fri Sep 11 16:41:55 2009 Subject: Webkit Message-ID: <1252685669.40940.270.camel@scotth.emsphone.com> I see that the webkit-gtk2 port is updated on Marcus.com, but not in the standard ports. Is updating the port reliant on the next Gnome release or can the port be updated before 2.28 is released? Thanks. From marcus at marcuscom.com Fri Sep 11 17:03:56 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Fri Sep 11 17:04:01 2009 Subject: Webkit In-Reply-To: <1252685669.40940.270.camel@scotth.emsphone.com> References: <1252685669.40940.270.camel@scotth.emsphone.com> Message-ID: <1252688633.97925.65.camel@shumai.marcuscom.com> On Fri, 2009-09-11 at 11:14 -0500, Scott T. Hildreth wrote: > I see that the webkit-gtk2 port is updated on Marcus.com, but not in the > standard ports. Is updating the port reliant on the next Gnome release > or can the port be updated before 2.28 is released? It comes with a shared lib bump, so it will be imported with GNOME 2.28. Joe -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090911/c52ae81f/attachment.pgp From reichp at austin.rr.com Fri Sep 11 18:34:27 2009 From: reichp at austin.rr.com (Patrick Reich) Date: Fri Sep 11 18:34:34 2009 Subject: gnome-power-manager and teTeX Message-ID: <1252692616.3330.21.camel@localhost.localdomain> Hello, Is there a way to avoid pulling in all the teTeX stuff with gnome-power-manager? I already have Texlive installed so I would prefer not to install teTeX also. Thank you, Patrick From barbara.xxx1975 at libero.it Fri Sep 11 23:20:43 2009 From: barbara.xxx1975 at libero.it (Barbara) Date: Fri Sep 11 23:20:49 2009 Subject: audio/gnome-media: should it be fixed to chase pulseaudio bump? Message-ID: <2690348.2345031252711241501.JavaMail.root@wmail50> After updating audio/pulseaudio to 0.9.17, the volume control on the panel was missing. So, trying from a console: $ gnome-volume-control /libexec/ld-elf.so. 1: Shared object "libpulsecommon-0.9.15.so" not found, required by "gnome- volume-control" which was obviously solved by a portupgrade -f audio/gnome- media. From niktychina at gmail.com Sat Sep 12 12:33:38 2009 From: niktychina at gmail.com (Nikolay Tychina) Date: Sat Sep 12 12:33:50 2009 Subject: FreeBSD Port: hal-0.5.11_26 Message-ID: Hello all, i updated to hal-0.5.11_26 and now i'm experiencing some problems wth hald. Some time after starting it stops working. lshal gives no response, devices aren't detected anymore. I can't restart hal, stop it or kill: lettuce# /usr/local/etc/rc.d/hald forcestop Stopping hald. Waiting for PIDS: 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240 et cetera, et cetera, et cetera... I hadn't have this problem with earlier versions until i updated hal. Help me to solve it, please. Cheers, Nik From m.seaman at infracaninophile.co.uk Sat Sep 12 13:01:49 2009 From: m.seaman at infracaninophile.co.uk (Matthew Seaman) Date: Sat Sep 12 13:02:09 2009 Subject: FreeBSD Port: hal-0.5.11_26 In-Reply-To: References: Message-ID: <4AAB9BB6.2040700@infracaninophile.co.uk> Nikolay Tychina wrote: > Hello all, > > i updated to hal-0.5.11_26 and now i'm experiencing some problems wth hald. > Some time after starting it stops working. lshal gives no response, devices > aren't detected anymore. > I can't restart hal, stop it or kill: > lettuce# /usr/local/etc/rc.d/hald forcestop > Stopping hald. > Waiting for PIDS: 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, > 1240, 1240, 1240, 1240, 1240, 1240 et cetera, et cetera, et cetera... > > > I hadn't have this problem with earlier versions until i updated hal. > Help me to solve it, please. > forcestop still only sends TERM, and you need to send a KILL to finish off the stuck process: # kill -9 1240 # /usr/local/etc/rc.d/hald restart Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 259 bytes Desc: OpenPGP digital signature Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090912/7ea3f036/signature.pgp From niktychina at gmail.com Sat Sep 12 13:06:16 2009 From: niktychina at gmail.com (Nikolay Tychina) Date: Sat Sep 12 13:06:23 2009 Subject: FreeBSD Port: hal-0.5.11_26 In-Reply-To: <4AAB9BB6.2040700@infracaninophile.co.uk> References: <4AAB9BB6.2040700@infracaninophile.co.uk> Message-ID: i tried kill. hald is invulnerable :( Nik 2009/9/12 Matthew Seaman > Nikolay Tychina wrote: > >> Hello all, >> >> i updated to hal-0.5.11_26 and now i'm experiencing some problems wth >> hald. >> Some time after starting it stops working. lshal gives no response, >> devices >> aren't detected anymore. >> I can't restart hal, stop it or kill: >> lettuce# /usr/local/etc/rc.d/hald forcestop >> Stopping hald. >> Waiting for PIDS: 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, 1240, >> 1240, 1240, 1240, 1240, 1240, 1240 et cetera, et cetera, et cetera... >> >> >> I hadn't have this problem with earlier versions until i updated hal. >> Help me to solve it, please. >> >> > forcestop still only sends TERM, and you need to send a KILL to finish off > the > stuck process: > > # kill -9 1240 > # /usr/local/etc/rc.d/hald restart > > Cheers, > > Matthew > > > -- > Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard > Flat 3 > PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate > Kent, CT11 9PW > > From m.seaman at infracaninophile.co.uk Sat Sep 12 13:17:52 2009 From: m.seaman at infracaninophile.co.uk (Matthew Seaman) Date: Sat Sep 12 13:17:58 2009 Subject: FreeBSD Port: hal-0.5.11_26 In-Reply-To: References: <4AAB9BB6.2040700@infracaninophile.co.uk> Message-ID: <4AAB9F79.4080906@infracaninophile.co.uk> Nikolay Tychina wrote: > i tried kill. > hald is invulnerable :( If hald is in a state where it won't respond to a kill -9 then you have no alternative but to hit the big red button and force your machine to reboot in order to get rid of it. hald shouldn't ever get into that state -- it used to happen to programs using resources on a NFS drive if the NFS server went away suddenly, and you'ld see lots of 'D's in the STAT column of ps(1}'s -auxwww output. That is about the only way to achieve that effect I know of, and it shouldn't affect a system daemon like hald though. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 259 bytes Desc: OpenPGP digital signature Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090912/4ce82c44/signature.pgp From niktychina at gmail.com Sat Sep 12 13:35:52 2009 From: niktychina at gmail.com (Nikolay Tychina) Date: Sat Sep 12 13:35:59 2009 Subject: FreeBSD Port: hal-0.5.11_26 In-Reply-To: <4AAB9F79.4080906@infracaninophile.co.uk> References: <4AAB9BB6.2040700@infracaninophile.co.uk> <4AAB9F79.4080906@infracaninophile.co.uk> Message-ID: 2009/9/12 Matthew Seaman wrote: > > If hald is in a state where it won't respond to a kill -9 then you have > no alternative but to hit the big red button and force your machine to > reboot in order to get rid of it. hald shouldn't ever get into that state > -- it used to happen to programs using resources on a NFS drive if the NFS > server went away suddenly, and you'ld see lots of 'D's in the STAT column > of ps(1}'s -auxwww output. That is about the only way to achieve that effect > I know of, and it shouldn't affect a system daemon like hald though. > Here's ps output: > ps auxww | grep hal haldaemon 1240 0,0 0,2 6812 4012 ?? Ds 12:17 0:15,38 /usr/local/sbin/hald root 1244 0,0 0,1 5776 2140 ?? I 12:17 0:00,04 hald-runner root 1252 0,0 0,1 5600 1732 ?? I 12:17 0:00,01 hald-addon-mouse-sysmouse: /dev/psm0 (hald-addon-mouse-sy) root 1258 0,0 0,1 5600 1732 ?? I 12:17 0:00,01 hald-addon-mouse-sysmouse: /dev/ums0 (hald-addon-mouse-sy) root 1261 0,0 0,1 3652 1432 ?? S 12:17 0:02,30 hald-addon-storage: /dev/cd0 (hald-addon-storage) nicholas 1471 0,0 0,2 8084 3692 ?? S 12:20 0:00,64 /usr/local/libexec/gvfs-hal-volume-monitor root 2513 0,0 0,1 3652 1292 ?? DE 15:46 0:00,21 hald-probe-scsi: /dev/da1 (hald-probe-scsi) root 2514 0,0 0,1 3652 1240 ?? I 15:46 0:00,01 /usr/local/libexec/hald-addon-storage nicholas 3735 0,0 0,1 3340 1152 p1 S+ 17:31 0:00,00 grep hal I noticed, if i plug/unplug my mobile phone (it works as flash drive) for several times, usb can brake. I.e. when i plug phone again nothing is being shown in dmesg. Could usb cause this hald state? From niktychina at gmail.com Sat Sep 12 13:39:19 2009 From: niktychina at gmail.com (Nikolay Tychina) Date: Sat Sep 12 13:39:25 2009 Subject: FreeBSD Port: hal-0.5.11_26 In-Reply-To: References: <4AAB9BB6.2040700@infracaninophile.co.uk> <4AAB9F79.4080906@infracaninophile.co.uk> Message-ID: Yeah, i killed all `pgrep hal` processes except 2: lettuce# ps auxww | grep hal haldaemon 1240 0,0 0,2 6812 4012 ?? Ds 12:17 0:15,38 /usr/local/sbin/hald root 2513 0,0 0,1 3652 1292 ?? DE 15:46 0:00,22 hald-probe-scsi: /dev/da1 (hald-probe-scsi) Something with my usb (da1 was phone) From magik at roorback.net Sat Sep 12 14:56:01 2009 From: magik at roorback.net (Grzegorz Blach) Date: Sat Sep 12 14:56:34 2009 Subject: libaudiofile port issue Message-ID: <5ed59268371f36d4175a5585189eb5d6@roorback.net> Every time when I call `aclocal`, I have had warning about syntax in 'audiofile.m4' file. In attachment I'm sending You patch, that resolve this problem. -------------- next part -------------- A non-text attachment was scrubbed... Name: audiofile.diff Type: application/octet-stream Size: 442 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090912/012009cc/audiofile.obj From marcus at marcuscom.com Sat Sep 12 16:50:30 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Sat Sep 12 16:50:37 2009 Subject: FreeBSD Port: hal-0.5.11_26 In-Reply-To: References: <4AAB9BB6.2040700@infracaninophile.co.uk> <4AAB9F79.4080906@infracaninophile.co.uk> Message-ID: <1252774233.97925.75.camel@shumai.marcuscom.com> On Sat, 2009-09-12 at 17:35 +0400, Nikolay Tychina wrote: > 2009/9/12 Matthew Seaman wrote: > > > > If hald is in a state where it won't respond to a kill -9 then you have > > no alternative but to hit the big red button and force your machine to > > reboot in order to get rid of it. hald shouldn't ever get into that state > > -- it used to happen to programs using resources on a NFS drive if the NFS > > server went away suddenly, and you'ld see lots of 'D's in the STAT column > > of ps(1}'s -auxwww output. That is about the only way to achieve that effect > > I know of, and it shouldn't affect a system daemon like hald though. > > > > > Here's ps output: > > ps auxww | grep hal > haldaemon 1240 0,0 0,2 6812 4012 ?? Ds 12:17 0:15,38 > /usr/local/sbin/hald > root 1244 0,0 0,1 5776 2140 ?? I 12:17 0:00,04 > hald-runner > root 1252 0,0 0,1 5600 1732 ?? I 12:17 0:00,01 > hald-addon-mouse-sysmouse: /dev/psm0 (hald-addon-mouse-sy) > root 1258 0,0 0,1 5600 1732 ?? I 12:17 0:00,01 > hald-addon-mouse-sysmouse: /dev/ums0 (hald-addon-mouse-sy) > root 1261 0,0 0,1 3652 1432 ?? S 12:17 0:02,30 > hald-addon-storage: /dev/cd0 (hald-addon-storage) > nicholas 1471 0,0 0,2 8084 3692 ?? S 12:20 0:00,64 > /usr/local/libexec/gvfs-hal-volume-monitor > root 2513 0,0 0,1 3652 1292 ?? DE 15:46 0:00,21 > hald-probe-scsi: /dev/da1 (hald-probe-scsi) > root 2514 0,0 0,1 3652 1240 ?? I 15:46 0:00,01 > /usr/local/libexec/hald-addon-storage > nicholas 3735 0,0 0,1 3340 1152 p1 S+ 17:31 0:00,00 grep hal > > I noticed, if i plug/unplug my mobile phone (it works as flash drive) for > several times, usb can brake. I.e. when i plug phone again nothing is being > shown in dmesg. Could usb cause this hald state? This has been reported before. You need to make sure you unmount any volumes related to that USB device before removing it. The new USB stack will allow hal to force the unmount, but that isn't coming until hal-0.5.13, and won't be available unless you're running 8.X or higher. Joe -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090912/c0233292/attachment.pgp From miwi at FreeBSD.org Sun Sep 13 19:26:12 2009 From: miwi at FreeBSD.org (Martin Wilke) Date: Sun Sep 13 19:26:51 2009 Subject: [ports-i386@FreeBSD.org: pulseaudio-0.9.17 failed on i386 7] Message-ID: <20090913192607.GK37922@bsdcrew.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - ----- Forwarded message from User Ports-i386 ----- Date: Sun, 13 Sep 2009 19:16:42 GMT From: User Ports-i386 To: erwin@FreeBSD.org, miwi@FreeBSD.org, linimon@FreeBSD.org, flz@FreeBSD.org Subject: pulseaudio-0.9.17 failed on i386 7 Excerpt from the build log at http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.7.20090911205617/pulseaudio-0.9.17.log building pulseaudio-0.9.17 on hobson9.isc.freebsd.org in directory /usr2/pkgbuild/7/20090911205617/chroot/2943 building for: 7.2-STABLE i386 maintained by: gnome@FreeBSD.org port directory: /usr/ports/audio/pulseaudio Makefile ident: $FreeBSD: ports/audio/pulseaudio/Makefile,v 1.50 2009/09/11 05:55:45 marcus Exp $ [... lines trimmed ...] && rm -f $file && /usr/local/bin/msgfmt -o $file ca.po file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file cs.po file=`echo de | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file de.po file=`echo de_CH | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file de_CH.po file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file el.po file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file es.po file=`echo fi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file fi.po file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file fr.po file=`echo gu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file gu.po file=`echo hi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file hi.po file=`echo it | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file it.po file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ja.po file=`echo kn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file kn.po file=`echo ml | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ml.po file=`echo mr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file mr.po file=`echo nl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file nl.po file=`echo or | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file or.po file=`echo pa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pa.po file=`echo pl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pl.po file=`echo pt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pt.po file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pt_BR.po file=`echo sr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file sr.po file=`echo sr@latin | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file sr@latin.po file=`echo sv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file sv.po file=`echo ta | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ta.po file=`echo te | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file te.po file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file uk.po file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file zh_CN.po gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/po' gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[2]: Nothing to be done for `all-am'. gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[1]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' ================================================================ ======================================== make: don't know how to make regression-test(continuing) ================================================================ ======================================== add_pkg ORBit2-2.14.17.tbz atk-1.26.0.tbz avahi-app-0.6.25_2.tbz bitstream-vera-1.10_4.tbz cairo-1.8.8,1.tbz compositeproto-0.4.tbz consolekit-0.3.0_8.tbz damageproto-1.1.0_2.tbz dbus-1.2.4.6_1.tbz dbus-glib-0.82.tbz dmidecode-2.10.tbz encodings-1.0.2,1.tbz expat-2.0.1.tbz fftw3-3.2.2_1.tbz fixesproto-4.0.tbz flac-1.2.1_1.tbz font-bh-ttf-1.0.0.tbz font-misc-ethiopic-1.0.0.tbz font-misc-meltho-1.0.0_1.tbz font-util-1.0.1.tbz fontconfig-2.6.0,1.tbz freetype2-2.3.9_1.tbz gamin-0.1.10_3.tbz gconf2-2.26.2_1.tbz gdbm-1.8.3_3.tbz gettext-0.17_1.tbz gio-fam-backend-2.20.5.tbz glib-2.20.5.tbz gnome_subr-1.0.tbz gnomehier-2.3_12.tbz gtk-2.16.6.tbz hal-0.5.11_26.tbz hicolor-icon-theme-0.10_2.tbz inputproto-1.5.0.tbz jasper-1.900.1_8.tbz jpeg-7.tbz kbproto-1.0.3.tbz libICE-1.0.4_1,1.tbz libIDL-0.8.13.tbz libSM-1.1.0_1,1.tbz libX11-1.2.1_1,1.tbz libXau-1.0.4.tbz libXcomposite-0.4.0,1.tbz libXcursor-1.1.9_1.tbz libXdamage-1.1.1.tbz libXdmcp-1.0.2_1.tbz libXext-1.0.5,1.tbz libXfixes-4.0.3_1 .tbz libXft-2.1.13.tbz libXi-1.2.1,1.tbz libXinerama-1.0.3,1.tbz libXrandr-1.3.0.tbz libXrender-0.9.4_1.tbz libXtst-1.0.3_1.tbz libdaemon-0.12.tbz libexecinfo-1.1_3.tbz libfontenc-1.0.4.tbz libiconv-1.13.1.tbz libltdl-2.2.6a.tbz libogg-1.1.4,4.tbz libpthread-stubs-0.1.tbz libsamplerate-0.1.7_1.tbz libsndfile-1.0.20_1.tbz libvolume_id-0.81.1.tbz libvorbis-1.2.3,3.tbz libxcb-1.4.tbz libxml2-2.7.3_1.tbz mkfontdir-1.0.4.tbz mkfontscale-1.0.6.tbz pango-1.24.5.tbz pciids-20090807.tbz pcre-7.9.tbz perl-5.8.9_3.tbz pixman-0.15.4.tbz pkg-config-0.23_1.tbz png-1.2.38.tbz policykit-0.9_5.tbz python26-2.6.2_3.tbz randrproto-1.3.0.tbz recordproto-1.13.2.tbz renderproto-0.9.3.tbz shared-mime-info-0.60_1.tbz speex-1.2.r1_2,1.tbz tiff-3.8.2_4.tbz xcb-proto-1.5.tbz xcb-util-0.3.6.tbz xextproto-7.0.5.tbz xineramaproto-1.1.2.tbz xorg-fonts-truetype-7.4.tbz xproto-7.0.15.tbz adding dependencies pkg_add ORBit2-2.14.17.tbz skipping ORBit2-2.14.17, already added pkg_add atk-1.26.0.tbz skipping atk-1.26.0, already added pkg_add avahi-app-0.6.25_2.tbz skipping avahi-app-0.6.25_2, already added pkg_add bitstream-vera-1.10_4.tbz skipping bitstream-vera-1.10_4, already added pkg_add cairo-1.8.8,1.tbz skipping cairo-1.8.8,1, already added pkg_add compositeproto-0.4.tbz skipping compositeproto-0.4, already added pkg_add consolekit-0.3.0_8.tbz skipping consolekit-0.3.0_8, already added pkg_add damageproto-1.1.0_2.tbz skipping damageproto-1.1.0_2, already added pkg_add dbus-1.2.4.6_1.tbz skipping dbus-1.2.4.6_1, already added pkg_add dbus-glib-0.82.tbz skipping dbus-glib-0.82, already added pkg_add dmidecode-2.10.tbz skipping dmidecode-2.10, already added pkg_add encodings-1.0.2,1.tbz skipping encodings-1.0.2,1, already added pkg_add expat-2.0.1.tbz skipping expat-2.0.1, already added pkg_add fftw3-3.2.2_1.tbz skipping fftw3-3.2.2_1, already added pkg_add fixesproto-4.0.tbz skipping fixesproto-4.0, already added pkg_add flac-1.2.1_1.tbz skipping flac-1.2.1_1, already added pkg_add font-bh-ttf-1.0.0.tbz skipping font-bh-ttf-1.0.0, already added pkg_add font-misc-ethiopic-1.0.0.tbz skipping font-misc-ethiopic-1.0.0, already added pkg_add font-misc-meltho-1.0.0_1.tbz skipping font-misc-meltho-1.0.0_1, already added pkg_add font-util-1.0.1.tbz skipping font-util-1.0.1, already added pkg_add fontconfig-2.6.0,1.tbz skipping fontconfig-2.6.0,1, already added pkg_add freetype2-2.3.9_1.tbz skipping freetype2-2.3.9_1, already added pkg_add gamin-0.1.10_3.tbz skipping gamin-0.1.10_3, already added pkg_add gconf2-2.26.2_1.tbz skipping gconf2-2.26.2_1, already added pkg_add gdbm-1.8.3_3.tbz skipping gdbm-1.8.3_3, already added pkg_add gettext-0.17_1.tbz skipping gettext-0.17_1, already added pkg_add gio-fam-backend-2.20.5.tbz skipping gio-fam-backend-2.20.5, already added pkg_add glib-2.20.5.tbz skipping glib-2.20.5, already added pkg_add gnome_subr-1.0.tbz skipping gnome_subr-1.0, already added pkg_add gnomehier-2.3_12.tbz skipping gnomehier-2.3_12, already added pkg_add gtk-2.16.6.tbz skipping gtk-2.16.6, already added pkg_add hal-0.5.11_26.tbz skipping hal-0.5.11_26, already added pkg_add hicolor-icon-theme-0.10_2.tbz skipping hicolor-icon-theme-0.10_2, already added pkg_add inputproto-1.5.0.tbz skipping inputproto-1.5.0, already added pkg_add jasper-1.900.1_8.tbz skipping jasper-1.900.1_8, already added pkg_add jpeg-7.tbz skipping jpeg-7, already added pkg_add kbproto-1.0.3.tbz skipping kbproto-1.0.3, already added pkg_add libICE-1.0.4_1,1.tbz skipping libICE-1.0.4_1,1, already added pkg_add libIDL-0.8.13.tbz skipping libIDL-0.8.13, already added pkg_add libSM-1.1.0_1,1.tbz skipping libSM-1.1.0_1,1, already added pkg_add libX11-1.2.1_1,1.tbz skipping libX11-1.2.1_1,1, already added pkg_add libXau-1.0.4.tbz skipping libXau-1.0.4, already added pkg_add libXcomposite-0.4.0,1.tbz skipping libXcomposite-0.4.0,1, already added pkg_add libXcursor-1.1.9_1.tbz skipping libXcursor-1.1.9_1, already added pkg_add libXdamage-1.1.1.tbz skipping libXdamage-1.1.1, already added pkg_add libXdmcp-1.0.2_1.tbz skipping libXdmcp-1.0.2_1, already added pkg_add libXext-1.0.5,1.tbz skipping libXext-1.0.5,1, already added pkg_add libXfixes-4.0.3_1.tbz skipping libXfixes-4.0.3_1, already added pkg_add libXft-2.1.13.tbz skipping libXft-2.1.13, already added pkg_add libXi-1.2.1,1.tbz skipping libXi-1.2.1,1, already added pkg_add libXinerama-1.0.3,1.tbz skipping libXinerama-1.0.3,1, already added pkg_add libXrandr-1.3.0.tbz skipping libXrandr-1.3.0, already added pkg_add libXrender-0.9.4_1.tbz skipping libXrender-0.9.4_1, already added pkg_add libXtst-1.0.3_1.tbz skipping libXtst-1.0.3_1, already added pkg_add libdaemon-0.12.tbz skipping libdaemon-0.12, already added pkg_add libexecinfo-1.1_3.tbz skipping libexecinfo-1.1_3, already added pkg_add libfontenc-1.0.4.tbz skipping libfontenc-1.0.4, already added pkg_add libiconv-1.13.1.tbz skipping libiconv-1.13.1, already added pkg_add libltdl-2.2.6a.tbz skipping libltdl-2.2.6a, already added pkg_add libogg-1.1.4,4.tbz skipping libogg-1.1.4,4, already added pkg_add libpthread-stubs-0.1.tbz skipping libpthread-stubs-0.1, already added pkg_add libsamplerate-0.1.7_1.tbz skipping libsamplerate-0.1.7_1, already added pkg_add libsndfile-1.0.20_1.tbz skipping libsndfile-1.0.20_1, already added pkg_add libvolume_id-0.81.1.tbz skipping libvolume_id-0.81.1, already added pkg_add libvorbis-1.2.3,3.tbz skipping libvorbis-1.2.3,3, already added pkg_add libxcb-1.4.tbz skipping libxcb-1.4, already added pkg_add libxml2-2.7.3_1.tbz skipping libxml2-2.7.3_1, already added pkg_add mkfontdir-1.0.4.tbz skipping mkfontdir-1.0.4, already added pkg_add mkfontscale-1.0.6.tbz skipping mkfontscale-1.0.6, already added pkg_add pango-1.24.5.tbz skipping pango-1.24.5, already added pkg_add pciids-20090807.tbz skipping pciids-20090807, already added pkg_add pcre-7.9.tbz skipping pcre-7.9, already added pkg_add perl-5.8.9_3.tbz skipping perl-5.8.9_3, already added pkg_add pixman-0.15.4.tbz skipping pixman-0.15.4, already added pkg_add pkg-config-0.23_1.tbz skipping pkg-config-0.23_1, already added pkg_add png-1.2.38.tbz skipping png-1.2.38, already added pkg_add policykit-0.9_5.tbz skipping policykit-0.9_5, already added pkg_add python26-2.6.2_3.tbz skipping python26-2.6.2_3, already added pkg_add randrproto-1.3.0.tbz skipping randrproto-1.3.0, already added pkg_add recordproto-1.13.2.tbz skipping recordproto-1.13.2, already added pkg_add renderproto-0.9.3.tbz skipping renderproto-0.9.3, already added pkg_add shared-mime-info-0.60_1.tbz skipping shared-mime-info-0.60_1, already added pkg_add speex-1.2.r1_2,1.tbz skipping speex-1.2.r1_2,1, already added pkg_add tiff-3.8.2_4.tbz skipping tiff-3.8.2_4, already added pkg_add xcb-proto-1.5.tbz skipping xcb-proto-1.5, already added pkg_add xcb-util-0.3.6.tbz skipping xcb-util-0.3.6, already added pkg_add xextproto-7.0.5.tbz skipping xextproto-7.0.5, already added pkg_add xineramaproto-1.1.2.tbz skipping xineramaproto-1.1.2, already added pkg_add xorg-fonts-truetype-7.4.tbz skipping xorg-fonts-truetype-7.4, already added pkg_add xproto-7.0.15.tbz skipping xproto-7.0.15, already added ===> Installing for pulseaudio-0.9.17 ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/sm.pc - found ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/xtst.pc - found ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/ice.pc - found ===> pulseaudio-0.9.17 depends on executable: pkg-config - found ===> pulseaudio-0.9.17 depends on file: /usr/local/lib/gio/modules/libgiofam.so - found ===> pulseaudio-0.9.17 depends on shared library: samplerate.1 - found ===> pulseaudio-0.9.17 depends on shared library: speexdsp.1 - found ===> pulseaudio-0.9.17 depends on shared library: dbus-1.3 - found ===> pulseaudio-0.9.17 depends on shared library: gdbm.3 - found ===> pulseaudio-0.9.17 depends on shared library: execinfo - found ===> pulseaudio-0.9.17 depends on shared library: avahi-client.3 - found ===> pulseaudio-0.9.17 depends on shared library: hal.1 - found ===> pulseaudio-0.9.17 depends on shared library: intl - found ===> pulseaudio-0.9.17 depends on shared library: ltdl.7 - found ===> pulseaudio-0.9.17 depends on shared library: atk-1.0.0 - found ===> pulseaudio-0.9.17 depends on shared library: gconf-2.4 - found ===> pulseaudio-0.9.17 depends on shared library: glib-2.0.0 - found ===> pulseaudio-0.9.17 depends on shared library: gtk-x11-2.0.0 - found ===> pulseaudio-0.9.17 depends on shared library: IDL-2.0 - found ===> pulseaudio-0.9.17 depends on shared library: xml2.5 - found ===> pulseaudio-0.9.17 depends on shared library: ORBit-2.0 - found ===> pulseaudio-0.9.17 depends on shared library: pango-1.0.0 - found ===> Generating temporary packing list ===> Checking if audio/pulseaudio already installed gmake install-recursive gmake[1]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' Making install in src gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake install-am gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake[4]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' test -z "/usr/local/lib" || .././install-sh -c -d "/usr/local/lib" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install /usr/bin/install -c -o root -g wheel libpulsecommon-0.9.17.la libpulse.la libpulse-simple.la libpulse-browse.la libpulse-mainloop-glib.la libpulsedsp.la libpulsecore-0.9.17.la '/usr/local/lib' gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecommon-0.9.17.so /usr/local/lib/libpulsecommon-0.9.17.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecommon-0.9.17.lai /usr/local/lib/libpulsecommon-0.9.17.la gnome-libtool: install: warning: relinking `libpulse.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics -show-option -Wl,-z,nodelete -Wl,-version-script=./map-file ! -version-info 10:0:10 -L/usr/local/lib -lX11 -lSM -lICE -lXtst -L/usr/local/lib -o libpulse.la -rpath /usr/local/lib libpulse_la-channelmap.lo libpulse_la-context.lo libpulse_la-error.lo libpulse_la-ext-stream-restore.lo libpulse_la-introspect.lo libpulse_la-mainloop-api.lo libpulse_la-mainloop-signal.lo libpulse_la-mainloop.lo libpulse_la-operation.lo libpulse_la-proplist.lo libpulse_la-rtclock.lo libpulse_la-sample.lo libpulse_la-scache.lo libpulse_la-stream.lo libpulse_la-subscribe.lo libpulse_la-thread-mainloop.lo libpulse_la-timeval.lo libpulse_la-utf8.lo libpulse_la-util.lo libpulse_la-volume.lo libpulse_la-xmalloc.lo libpulse_la-client-conf-x11.lo -pthread libpulsecommon-0.9.17.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse.so.0T /usr/local/lib/libpulse.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse.so.0 libpulse.so || { rm -f libpulse.so && ln -s libpulse.so.0 libpulse.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse.so.0 libpulse.so || { rm -f libpulse.so && ln -s libpulse.so.0 libpulse.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse.lai /usr/local/lib/libpulse.la gnome-libtool: install: warning: relinking `libpulse-simple.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -Wl,-version-script=./map-file -version-info 0:3:0 -L/usr/local/lib -o libp ulse-simple.la -rpath /usr/local/lib libpulse_simple_la-simp! le.lo -pthread libpulse.la libpulsecommon-0.9.17.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-simple.so.0T /usr/local/lib/libpulse-simple.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-simple.so.0 libpulse-simple.so || { rm -f libpulse-simple.so && ln -s libpulse-simple.so.0 libpulse-simple.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-simple.so.0 libpulse-simple.so || { rm -f libpulse-simple.so && ln -s libpulse-simple.so.0 libpulse-simple.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-simple.lai /usr/local/lib/libpulse-simple.la gnome-libtool: install: warning: relinking `libpulse-browse.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -Wl,-version-script=./map- file -version-info 1:1:1 -L/usr/local/lib -o libpulse-browse! .la -rpath /usr/local/lib libpulse_browse_la-browser.lo libpulse_browse_la-avahi-wrap.lo -pthread libpulse.la libpulsecommon-0.9.17.la -pthread -L/usr/local/lib -lavahi-common -lavahi-client -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-browse.so.0T /usr/local/lib/libpulse-browse.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-browse.so.0 libpulse-browse.so || { rm -f libpulse-browse.so && ln -s libpulse-browse.so.0 libpulse-browse.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-browse.so.0 libpulse-browse.so || { rm -f libpulse-browse.so && ln -s libpulse-browse.so.0 libpulse-browse.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-browse.lai /usr/local/lib/libpulse-browse.la gnome-libtool: install: warning: relinking `libpulse-mainloop-glib.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -Wl,-versio n-script=./map-file -version-info 0:4:0 -L/usr/local/lib -o ! libpulse-mainloop-glib.la -rpath /usr/local/lib libpulse_mainloop_glib_la-glib-mainloop.lo -pthread libpulse.la libpulsecommon-0.9.17.la -L/usr/local/lib -lglib-2.0 -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-mainloop-glib.so.0T /usr/local/lib/libpulse-mainloop-glib.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so || { rm -f libpulse-mainloop-glib.so && ln -s libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so || { rm -f libpulse-mainloop-glib.so && ln -s libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-mainloop-glib.lai /usr/local/lib/libpulse-mainloop-glib.la gnome-libtool: install: warning: relinking `libpulsedsp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -avoid-version -disable-static -L/usr/local/lib -o libpulsedsp.la -rpath /u sr/local/lib libpulsedsp_la-padsp.lo -pthread libpulse.la li! bpulsecommon-0.9.17.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsedsp.soT /usr/local/lib/libpulsedsp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsedsp.lai /usr/local/lib/libpulsedsp.la gnome-libtool: install: warning: relinking `libpulsecore-0.9.17.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include -I/usr/local/include -D_THREAD_SAFE -I/usr/local/include -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_ FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoi! d-version -L/usr/local/lib -lX11 -lSM -lICE -lXtst -L/usr/local/lib -o libpulsecore-0.9.17.la -rpath /usr/local/lib libpulsecore_0.9.17_la-asyncmsgq.lo libpulsecore_0.9.17_la-asyncq.lo libpulsecore_0.9.17_la-auth-cookie.lo libpulsecore_0.9.17_la-cli-command.lo libpulsecore_0.9.17_la-cli-text.lo libpulsecore_0.9.17_la-client.lo libpulsecore_0.9.17_la-card.lo libpulsecore_0.9.17_la-core-scache.lo libpulsecore_0.9.17_la-core-subscribe.lo libpulsecore_0.9.17_la-core.lo libpulsecore_0.9.17_la-envelope.lo libpulsecore_0.9.17_la-fdsem.lo libpulsecore_0.9.17_la-g711.lo libpulsecore_0.9.17_la-hook-list.lo libpulsecore_0.9.17_la-ltdl-helper.lo libpulsecore_0.9.17_la-modargs.lo libpulsecore_0.9.17_la-modinfo.lo libpulsecore_0.9.17_la-module.lo libpulsecore_0.9.17_la-msgobject.lo libpulsecore_0.9.17_la-namereg.lo libpulsecore_0.9.17_la-object.lo libpulsecore_0.9.17_la-play-memblockq.lo libpulsecore_0.9.17_la-play-memchunk.lo libpulsecore_0.9.17_la-remap.lo libpulsecore_0.9.17_la-remap_m mx.lo libpulsecore_0.9.17_la-remap_sse.lo libpulsecore_0.9.17_la-resampler.lo libpulsecore_0.9.17_la-rtpoll.lo libpulsecore_0.9.17_la-sample-util.lo libpulsecore_0.9.17_la-cpu-arm.lo libpulsecore_0.9.17_la-cpu-x86.lo libpulsecore_0.9.17_la-svolume_c.lo libpulsecore_0.9.17_la-svolume_arm.lo libpulsecore_0.9.17_la-svolume_mmx.lo libpulsecore_0.9.17_la-svolume_sse.lo libpulsecore_0.9.17_la-sconv-s16be.lo libpulsecore_0.9.17_la-sconv-s16le.lo libpulsecore_0.9.17_la-sconv_sse.lo libpulsecore_0.9.17_la-sconv.lo libpulsecore_0.9.17_la-shared.lo libpulsecore_0.9.17_la-shm.lo libpulsecore_0.9.17_la-sink-input.lo libpulsecore_0.9.17_la-sink.lo libpulsecore_0.9.17_la-sioman.lo libpulsecore_0.9.17_la-sound-file-stream.lo libpulsecore_0.9.17_la-sound-file.lo libpulsecore_0.9.17_la-source-output.lo libpulsecore_0.9.17_la-source.lo libpulsecore_0.9.17_la-start-child.lo libpulsecore_0.9.17_la-thread-mq.lo libpulsecore_0.9.17_la-time-smoother.lo libpulsecore_0.9.17_la-x11wrap.lo libpulsecore _0.9.17_la-dbus-shared.lo libpulsecore_0.9.17_la-database-gd! bm.lo -pt! hread -lltdl -L/usr/local/lib -lsamplerate -L/usr/local/lib -lspeexdsp libpulsecommon-0.9.17.la libpulse.la libpulsecore-foreign.la -L/usr/local/lib -ldbus-1 -lgdbm -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecore-0.9.17.soT /usr/local/lib/libpulsecore-0.9.17.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecore-0.9.17.lai /usr/local/lib/libpulsecore-0.9.17.la gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecommon-0.9.17.a /usr/local/lib/libpulsecommon-0.9.17.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulsecommon-0.9.17.a gnome-libtool: install: ranlib /usr/local/lib/libpulsecommon-0.9.17.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse.a /usr/local/lib/libpulse.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse.a gnome-libtool: install: ranlib /usr/local/lib/libpulse.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-simple.a /usr/local/lib/libpulse-simple.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse-simple.a gnome-libtool: install: ranlib /usr/local/lib/libpulse-simple.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-browse.a /usr/local/lib/libpulse-browse.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse-browse.a gnome-libtool: install: ranlib /usr/local/lib/libpulse-browse.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-mainloop-glib.a /usr/local/lib/libpulse-mainloop-glib.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse-mainloop-glib.a gnome-libtool: install: ranlib /usr/local/lib/libpulse-mainloop-glib.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsedsp.a /usr/local/lib/libpulsedsp.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulsedsp.a gnome-libtool: install: ranlib /usr/local/lib/libpulsedsp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecore-0.9.17.a /usr/local/lib/libpulsecore-0.9.17.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulsecore-0.9.17.a gnome-libtool: install: ranlib /usr/local/lib/libpulsecore-0.9.17.a - ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. - ---------------------------------------------------------------------- test -z "/usr/local/bin" || .././install-sh -c -d "/usr/local/bin" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install install -s -o root -g wheel -m 555 pulseaudio pacat pactl pasuspender pacmd pax11publish pabrowse '/usr/local/bin' gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pulseaudio /usr/local/bin/pulseaudio gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pacat /usr/local/bin/pacat gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pactl /usr/local/bin/pactl gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pasuspender /usr/local/bin/pasuspender gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pacmd /usr/local/bin/pacmd gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pax11publish /usr/local/bin/pax11publish gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pabrowse /usr/local/bin/pabrowse test -z "/usr/local/bin" || .././install-sh -c -d "/usr/local/bin" install -o root -g wheel -m 555 esdcompat start-pulseaudio-x11 utils/padsp '/usr/local/bin' test -z "/usr/local/lib/pulse-0.9.17/modules" || .././install-sh -c -d "/usr/local/lib/pulse-0.9.17/modules" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install /usr/bin/install -c -o root -g wheel libcli.la libprotocol-cli.la libprotocol-simple.la libprotocol-http.la libprotocol-native.la libprotocol-esound.la librtp.la libavahi-wrap.la module-console-kit.la module-cli.la module-cli-protocol-tcp.la module-simple-protocol-tcp.la module-null-sink.la module-sine-source.la module-detect.la module-volume-restore.la module-device-restore.la module-stream-restore.la module-card-restore.la module-default-device-restore.la module-always-sink.la module-rescue-streams.la module-intended-roles.la module-suspend-on-idle.la module-http-protocol-tcp.la module-sine.la module-native-protocol-tcp.la module-native-protocol-fd.la module-esound-protocol-tcp.la module-combine.la module-remap-sink.la module-ladspa-sink.la module-esound-sink.la module-tunnel-sink.la module-tunnel-source.la module-position-event-sounds.la module-augment-properties.la module-cork-music-on-phone.la module-loopback.la module-rtp-send.la module-rtp-recv.la module-cli-protocol-unix.la module-simple-protocol-unix.la module-http-protocol-unix.la module-native-protocol-unix.la module-esound-protocol-unix.la module-pipe-sink.la module-pipe-source.la module-esound-compat-spawnfd.la module-esound-compat-spawnpid.la module-match.la module-x11-bell.la module-x11-publish.la module-x11-xsmp.la module-x11-cork-request.la liboss-util.la module-oss.la module-zeroconf-publish.la module-zeroconf-discover.la module-gconf.la module-hal-detect.la module-rygel-media-server.la libraop.la module-raop-sink.la module-raop-discover.la '/usr/local/lib/pulse-0.9.17/modules' gnome-libtool: install: warning: relinking `libcli.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libcli.la -rpath /usr/local/lib/pulse-0.9.17/modules cli .lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la! libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libcli.soT /usr/local/lib/pulse-0.9.17/modules/libcli.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libcli.lai /usr/local/lib/pulse-0.9.17/modules/libcli.la gnome-libtool: install: warning: relinking `libprotocol-cli.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-cli.la -rpath /usr/local/lib/pulse-0.9.17/mo dules protocol-cli.lo -pthread libpulsecore-0.9.17.la libpul! secommon-0.9.17.la libpulse.la libcli.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-cli.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-cli.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.la gnome-libtool: install: warning: relinking `libprotocol-simple.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-simple.la -rpath /usr/local/lib/pulse-0.9.17 /modules protocol-simple.lo -pthread libpulsecore-0.9.17.la ! libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-simple.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-simple.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.la gnome-libtool: install: warning: relinking `libprotocol-http.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-http.la -rpath /usr/local/lib/pulse-0.9.17/m odules protocol-http.lo mime-type.lo -pthread libpulsecore-0! .9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-http.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-http.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.la gnome-libtool: install: warning: relinking `libprotocol-native.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-native.la -rpath /usr/local/lib/pulse-0.9.17 /modules protocol-native.lo -pthread libpulsecore-0.9.17.la ! libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-native.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-native.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.la gnome-libtool: install: warning: relinking `libprotocol-esound.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-esound.la -rpath /usr/local/lib/pulse-0.9.17 /modules protocol-esound.lo -pthread libpulsecore-0.9.17.la ! libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-esound.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-esound.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.la gnome-libtool: install: warning: relinking `librtp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o librtp.la -rpath /usr/local/lib/pulse-0.9.17/modules rtp .lo sdp.lo sap.lo rtsp_client.lo headerlist.lo -pthread libp! ulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/librtp.soT /usr/local/lib/pulse-0.9.17/modules/librtp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/librtp.lai /usr/local/lib/pulse-0.9.17/modules/librtp.la gnome-libtool: install: warning: relinking `libavahi-wrap.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libavah i-wrap.la -rpath /usr/local/lib/pulse-0.9.17/modules libavah! i_wrap_la-avahi-wrap.lo -pthread -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libavahi-wrap.soT /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libavahi-wrap.lai /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.la gnome-libtool: install: warning: relinking `module-console-kit.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-console-kit.la -r! path /usr/local/lib/pulse-0.9.17/modules module_console_kit_la-module-console-kit.lo -pthread -L/usr/local/lib -ldbus-1 libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-console-kit.soT /usr/local/lib/pulse-0.9.17/modules/module-console-kit.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-console-kit.lai /usr/local/lib/pulse-0.9.17/modules/module-console-kit.la gnome-libtool: install: warning: relinking `module-cli.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-cli.la -rpath /usr/local/ lib/pulse-0.9.17/modules module-cli.lo -pthread libpulsecore! -0.9.17.la libcli.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli.soT /usr/local/lib/pulse-0.9.17/modules/module-cli.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli.lai /usr/local/lib/pulse-0.9.17/modules/module-cli.la gnome-libtool: install: warning: relinking `module-cli-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_CLI -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_P ATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/li b -o module-cli-protocol-tcp.la -rpath /usr/local/lib/pulse-! 0.9.17/modules module_cli_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-cli.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.la gnome-libtool: install: warning: relinking `module-simple-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_SIMPLE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIM E_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local /lib -o module-simple-protocol-tcp.la -rpath /usr/local/lib/! pulse-0.9.17/modules module_simple_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-simple.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.la gnome-libtool: install: warning: relinking `module-null-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-null-sink.la -rpath /usr/ local/lib/pulse-0.9.17/modules module-null-sink.lo -pthread ! libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-null-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-null-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-null-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-null-sink.la gnome-libtool: install: warning: relinking `module-sine-source.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -avoid-version -L/usr/local/lib -o module-sine-source.la -rpath /usr/local/lib/puls e-0.9.17/modules module-sine-source.lo -pthread libpulsecore! -0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine-source.soT /usr/local/lib/pulse-0.9.17/modules/module-sine-source.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine-source.lai /usr/local/lib/pulse-0.9.17/modules/module-sine-source.la gnome-libtool: install: warning: relinking `module-detect.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-detect.la -rpath /usr/loc al/lib/pulse-0.9.17/modules module_detect_la-module-detect.l! o -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-detect.soT /usr/local/lib/pulse-0.9.17/modules/module-detect.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-detect.lai /usr/local/lib/pulse-0.9.17/modules/module-detect.la gnome-libtool: install: warning: relinking `module-volume-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-volume-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_volume_restore_la! -module-volume-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-volume-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-volume-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.la gnome-libtool: install: warning: relinking `module-device-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-device-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_device_restore_la! -module-device-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-device-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-device-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-device-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-device-restore.la gnome-libtool: install: warning: relinking `module-stream-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-stream-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_stream_restore_la! -module-stream-restore.lo -pthread libprotocol-native.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-stream-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-stream-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.la gnome-libtool: install: warning: relinking `module-card-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-card-restore.la -rpath /u sr/local/lib/pulse-0.9.17/modules module_card_restore_la-mod! ule-card-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-card-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-card-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-card-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-card-restore.la gnome-libtool: install: warning: relinking `module-default-device-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-default-device-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_default_d! evice_restore_la-module-default-device-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-default-device-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-default-device-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.la gnome-libtool: install: warning: relinking `module-always-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-always-sink.la -rpath /us r/local/lib/pulse-0.9.17/modules module_always_sink_la-modul! e-always-sink.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-always-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-always-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-always-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-always-sink.la gnome-libtool: install: warning: relinking `module-rescue-streams.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rescue-streams.la -rpath /usr/local/lib/pulse-0.9.17/modules module_rescue_streams_la! -module-rescue-streams.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rescue-streams.soT /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rescue-streams.lai /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.la gnome-libtool: install: warning: relinking `module-intended-roles.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-intended-roles.la -rpath /usr/local/lib/pulse-0.9.17/modules module_intended_roles_la! -module-intended-roles.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-intended-roles.soT /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-intended-roles.lai /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.la gnome-libtool: install: warning: relinking `module-suspend-on-idle.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-suspend-on-idle.la -rpath /usr/local/lib/pulse-0.9.17/modules module_suspend_on_idle_! la-module-suspend-on-idle.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-suspend-on-idle.soT /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-suspend-on-idle.lai /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.la gnome-libtool: install: warning: relinking `module-http-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_HTTP -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_ PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/l ib -o module-http-protocol-tcp.la -rpath /usr/local/lib/puls! e-0.9.17/modules module_http_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-http.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.la gnome-libtool: install: warning: relinking `module-sine.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-sine.la -rpath /usr/local /lib/pulse-0.9.17/modules module-sine.lo -pthread libpulseco! re-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine.soT /usr/local/lib/pulse-0.9.17/modules/module-sine.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine.lai /usr/local/lib/pulse-0.9.17/modules/module-sine.la gnome-libtool: install: warning: relinking `module-native-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_NATIVE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIM E_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local /lib -o module-native-protocol-tcp.la -rpath /usr/local/lib/! pulse-0.9.17/modules module_native_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-native.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.la gnome-libtool: install: warning: relinking `module-native-protocol-fd.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-native-protocol-fd.la -rp ath /usr/local/lib/pulse-0.9.17/modules module_native_protoc! ol_fd_la-module-native-protocol-fd.lo -pthread libpulsecore-0.9.17.la libprotocol-native.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-fd.soT /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-fd.lai /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.la gnome-libtool: install: warning: relinking `module-esound-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_ESOUND -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIM E_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local /lib -o module-esound-protocol-tcp.la -rpath /usr/local/lib/! pulse-0.9.17/modules module_esound_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-esound.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.la gnome-libtool: install: warning: relinking `module-combine.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-combine.la -rpath /usr/lo cal/lib/pulse-0.9.17/modules module-combine.lo -pthread libp! ulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-combine.soT /usr/local/lib/pulse-0.9.17/modules/module-combine.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-combine.lai /usr/local/lib/pulse-0.9.17/modules/module-combine.la gnome-libtool: install: warning: relinking `module-remap-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-remap-sink.la -rpath /usr /local/lib/pulse-0.9.17/modules module-remap-sink.lo -pthrea! d libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-remap-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-remap-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.la gnome-libtool: install: warning: relinking `module-ladspa-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DLADSPA_PATH=\"/usr/local/lib/ladspa:/usr/local/lib/ladspa:/usr/lib/ladspa:/usr/local/lib64/ladspa:/usr/lib64/ladspa\" -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/us r/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-comm on -fdiagnostics-show-option -module -disable-static -avoid-! version -L/usr/local/lib -o module-ladspa-sink.la -rpath /usr/local/lib/pulse-0.9.17/modules module_ladspa_sink_la-module-ladspa-sink.lo -pthread -lltdl libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-ladspa-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-ladspa-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.la gnome-libtool: install: warning: relinking `module-esound-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-esound-sink.la -rpath /us r/local/lib/pulse-0.9.17/modules module-esound-sink.lo -pthr! ead libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.la gnome-libtool: install: warning: relinking `module-tunnel-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DTUNNEL_SINK=1 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\ " -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-tunnel-si nk.la -rpath /usr/local/lib/pulse-0.9.17/modules module_tunn! el_sink_la-module-tunnel.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.la gnome-libtool: install: warning: relinking `module-tunnel-source.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-tunnel-source.la -rpath / usr/local/lib/pulse-0.9.17/modules module-tunnel.lo -pthread! libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-source.soT /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-source.lai /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.la gnome-libtool: install: warning: relinking `module-position-event-sounds.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-position-event-sounds.la -rpath /usr/local/lib/pulse-0.9.17/modules module_position_e! vent_sounds_la-module-position-event-sounds.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-position-event-sounds.soT /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-position-event-sounds.lai /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.la gnome-libtool: install: warning: relinking `module-augment-properties.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -DDESKTOPFILEDIR=\"/usr/share/applications\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/ local/lib -o module-augment-properties.la -rpath /usr/local/! lib/pulse-0.9.17/modules module_augment_properties_la-module-augment-properties.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-augment-properties.soT /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-augment-properties.lai /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.la gnome-libtool: install: warning: relinking `module-cork-music-on-phone.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-cork-music-on-phone.la -r path /usr/local/lib/pulse-0.9.17/modules module_cork_music_o! n_phone_la-module-cork-music-on-phone.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cork-music-on-phone.soT /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cork-music-on-phone.lai /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.la gnome-libtool: install: warning: relinking `module-loopback.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-loopback.la -rpath /usr/l ocal/lib/pulse-0.9.17/modules module-loopback.lo -pthread li! bpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-loopback.soT /usr/local/lib/pulse-0.9.17/modules/module-loopback.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-loopback.lai /usr/local/lib/pulse-0.9.17/modules/module-loopback.la gnome-libtool: install: warning: relinking `module-rtp-send.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rtp-send.la -rpath /usr/l ocal/lib/pulse-0.9.17/modules module_rtp_send_la-module-rtp-! send.lo -pthread libpulsecore-0.9.17.la librtp.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-send.soT /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-send.lai /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.la gnome-libtool: install: warning: relinking `module-rtp-recv.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rtp-recv.la -rpath /usr/l ocal/lib/pulse-0.9.17/modules module_rtp_recv_la-module-rtp-! recv.lo -pthread libpulsecore-0.9.17.la librtp.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-recv.soT /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-recv.lai /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.la gnome-libtool: install: warning: relinking `module-cli-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_CLI -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_ PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/l ib -o module-cli-protocol-unix.la -rpath /usr/local/lib/puls! e-0.9.17/modules module_cli_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-cli.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.la gnome-libtool: install: warning: relinking `module-simple-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_SIMPLE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTI ME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/loca l/lib -o module-simple-protocol-unix.la -rpath /usr/local/li! b/pulse-0.9.17/modules module_simple_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-simple.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.la gnome-libtool: install: warning: relinking `module-http-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_HTTP -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME _PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/ lib -o module-http-protocol-unix.la -rpath /usr/local/lib/pu! lse-0.9.17/modules module_http_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-http.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.la gnome-libtool: install: warning: relinking `module-native-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_NATIVE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTI ME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/loca l/lib -o module-native-protocol-unix.la -rpath /usr/local/li! b/pulse-0.9.17/modules module_native_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-native.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.la gnome-libtool: install: warning: relinking `module-esound-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_ESOUND -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTI ME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/loca l/lib -o module-esound-protocol-unix.la -rpath /usr/local/li! b/pulse-0.9.17/modules module_esound_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-esound.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.la gnome-libtool: install: warning: relinking `module-pipe-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-pipe-sink.la -rpath /usr/ local/lib/pulse-0.9.17/modules module-pipe-sink.lo -pthread ! libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.la gnome-libtool: install: warning: relinking `module-pipe-source.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-pipe-source.la -rpath /us r/local/lib/pulse-0.9.17/modules module-pipe-source.lo -pthr! ead libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-source.soT /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-source.lai /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.la gnome-libtool: install: warning: relinking `module-esound-compat-spawnfd.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-esound-compat-spawnfd.la -rpath /usr/local/lib/pulse-0.9.17/modules module-esound-com! pat-spawnfd.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnfd.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnfd.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.la gnome-libtool: install: warning: relinking `module-esound-compat-spawnpid.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-esound-compat-spawnpid.la -rpath /usr/local/lib/pulse-0.9.17/modules module-esound-co! mpat-spawnpid.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnpid.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnpid.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.la gnome-libtool: install: warning: relinking `module-match.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-match.la -rpath /usr/loca l/lib/pulse-0.9.17/modules module-match.lo -pthread libpulse! core-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-match.soT /usr/local/lib/pulse-0.9.17/modules/module-match.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-match.lai /usr/local/lib/pulse-0.9.17/modules/module-match.la gnome-libtool: install: warning: relinking `module-x11-bell.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-bell.la -rpath /usr/local/lib/pulse-0.9.17/mo! dules module_x11_bell_la-module-x11-bell.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-bell.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-bell.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.la gnome-libtool: install: warning: relinking `module-x11-publish.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-publish.la -rpath /usr/local/lib/pulse-0.9.17! /modules module_x11_publish_la-module-x11-publish.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libprotocol-native.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-publish.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-publish.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.la gnome-libtool: install: warning: relinking `module-x11-xsmp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-xsmp.la -rpath /usr/local/lib/pulse-0.9.17/mo! dules module_x11_xsmp_la-module-x11-xsmp.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-xsmp.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-xsmp.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.la gnome-libtool: install: warning: relinking `module-x11-cork-request.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-cork-request.la -rpath /usr/local/lib/pulse-0! .9.17/modules module_x11_cork_request_la-module-x11-cork-request.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-cork-request.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-cork-request.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.la gnome-libtool: install: warning: relinking `liboss-util.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o liboss-util.la -rpath /usr/local/lib/pulse-0.9.17/module s oss-util.lo libpulsecore-0.9.17.la libpulsecommon-0.9.17.l! a libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/liboss-util.soT /usr/local/lib/pulse-0.9.17/modules/liboss-util.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/liboss-util.lai /usr/local/lib/pulse-0.9.17/modules/liboss-util.la gnome-libtool: install: warning: relinking `module-oss.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-oss.la -rpath /usr/local/ lib/pulse-0.9.17/modules module-oss.lo -pthread liboss-util.! la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-oss.soT /usr/local/lib/pulse-0.9.17/modules/module-oss.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-oss.lai /usr/local/lib/pulse-0.9.17/modules/module-oss.la gnome-libtool: install: warning: relinking `module-zeroconf-publish.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/ usr/local/lib -o module-zeroconf-publish.la -rpath /usr/loca! l/lib/pulse-0.9.17/modules module_zeroconf_publish_la-module-zeroconf-publish.lo -pthread -pthread -L/usr/local/lib -lavahi-common -lavahi-client libavahi-wrap.la libprotocol-native.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-publish.soT /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-publish.lai /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.la gnome-libtool: install: warning: relinking `module-zeroconf-discover.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/ usr/local/lib -o module-zeroconf-discover.la -rpath /usr/loc! al/lib/pulse-0.9.17/modules module_zeroconf_discover_la-module-zeroconf-discover.lo -pthread -pthread -L/usr/local/lib -lavahi-common -lavahi-client libavahi-wrap.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-discover.soT /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-discover.lai /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.la gnome-libtool: install: warning: relinking `module-gconf.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -DPA_GCONF_HELPER=\"/usr/local/libexec/pulse/gconf-helper\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid- version -L/usr/local/lib -o module-gconf.la -rpath /usr/loca! l/lib/pulse-0.9.17/modules module_gconf_la-module-gconf.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-gconf.soT /usr/local/lib/pulse-0.9.17/modules/module-gconf.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-gconf.lai /usr/local/lib/pulse-0.9.17/modules/module-gconf.la gnome-libtool: install: warning: relinking `module-hal-detect.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/local/include/hal -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-co mmon -fdiagnostics-show-option -module -disable-static -avoi! d-version -L/usr/local/lib -o module-hal-detect.la -rpath /usr/local/lib/pulse-0.9.17/modules module_hal_detect_la-module-hal-detect.lo -pthread -L/usr/local/lib -lhal -ldbus-1 libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-hal-detect.soT /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-hal-detect.lai /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.la gnome-libtool: install: warning: relinking `module-rygel-media-server.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rygel-media-serve! r.la -rpath /usr/local/lib/pulse-0.9.17/modules module_rygel_media_server_la-module-rygel-media-server.lo -pthread -L/usr/local/lib -ldbus-1 libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la libprotocol-http.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rygel-media-server.soT /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rygel-media-server.lai /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.la gnome-libtool: install: warning: relinking `libraop.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libraop.la -rpath /usr/local/lib/pulse-0. 9.17/modules libraop_la-raop_client.lo libraop_la-base64.lo ! -pthread -lcrypto -lssl libpulsecore-0.9.17.la librtp.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libraop.soT /usr/local/lib/pulse-0.9.17/modules/libraop.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libraop.lai /usr/local/lib/pulse-0.9.17/modules/libraop.la gnome-libtool: install: warning: relinking `module-raop-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-raop-sink.la -rpath /usr/ local/lib/pulse-0.9.17/modules module-raop-sink.lo -pthread ! libpulsecore-0.9.17.la librtp.la libraop.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.la gnome-libtool: install: warning: relinking `module-raop-discover.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -fno-strict-aliasing -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/ usr/local/lib -o module-raop-discover.la -rpath /usr/local/l! ib/pulse-0.9.17/modules module_raop_discover_la-module-raop-discover.lo -pthread -pthread -L/usr/local/lib -lavahi-common -lavahi-client libavahi-wrap.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-discover.soT /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-discover.lai /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.la gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libcli.a /usr/local/lib/pulse-0.9.17/modules/libcli.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libcli.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libcli.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-cli.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-simple.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-http.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-native.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-esound.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/librtp.a /usr/local/lib/pulse-0.9.17/modules/librtp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/librtp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/librtp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libavahi-wrap.a /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-console-kit.a /usr/local/lib/pulse-0.9.17/modules/module-console-kit.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-console-kit.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-console-kit.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli.a /usr/local/lib/pulse-0.9.17/modules/module-cli.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cli.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cli.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-null-sink.a /usr/local/lib/pulse-0.9.17/modules/module-null-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-null-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-null-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine-source.a /usr/local/lib/pulse-0.9.17/modules/module-sine-source.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-sine-source.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-sine-source.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-detect.a /usr/local/lib/pulse-0.9.17/modules/module-detect.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-detect.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-detect.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-volume-restore.a /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-device-restore.a /usr/local/lib/pulse-0.9.17/modules/module-device-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-device-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-device-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-stream-restore.a /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-card-restore.a /usr/local/lib/pulse-0.9.17/modules/module-card-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-card-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-card-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-default-device-restore.a /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-always-sink.a /usr/local/lib/pulse-0.9.17/modules/module-always-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-always-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-always-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rescue-streams.a /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-intended-roles.a /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-suspend-on-idle.a /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine.a /usr/local/lib/pulse-0.9.17/modules/module-sine.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-sine.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-sine.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-fd.a /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-combine.a /usr/local/lib/pulse-0.9.17/modules/module-combine.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-combine.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-combine.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-remap-sink.a /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-ladspa-sink.a /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-sink.a /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-sink.a /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-source.a /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-position-event-sounds.a /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-augment-properties.a /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cork-music-on-phone.a /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-loopback.a /usr/local/lib/pulse-0.9.17/modules/module-loopback.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-loopback.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-loopback.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-send.a /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-recv.a /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-sink.a /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-source.a /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnfd.a /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnpid.a /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-match.a /usr/local/lib/pulse-0.9.17/modules/module-match.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-match.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-match.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-bell.a /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-publish.a /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-xsmp.a /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-cork-request.a /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/liboss-util.a /usr/local/lib/pulse-0.9.17/modules/liboss-util.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/liboss-util.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/liboss-util.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-oss.a /usr/local/lib/pulse-0.9.17/modules/module-oss.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-oss.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-oss.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-publish.a /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-discover.a /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-gconf.a /usr/local/lib/pulse-0.9.17/modules/module-gconf.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-gconf.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-gconf.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-hal-detect.a /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rygel-media-server.a /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libraop.a /usr/local/lib/pulse-0.9.17/modules/libraop.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libraop.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libraop.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-sink.a /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-discover.a /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.a - ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib/pulse-0.9.17/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. - ---------------------------------------------------------------------- test -z "/usr/local/libexec/pulse" || .././install-sh -c -d "/usr/local/libexec/pulse" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install install -s -o root -g wheel -m 555 gconf-helper '/usr/local/libexec/pulse' gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/gconf-helper /usr/local/libexec/pulse/gconf-helper gmake install-exec-hook gmake[5]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' chown root /usr/local/libexec/pulse/proximity-helper chown: /usr/local/libexec/pulse/proximity-helper: No such file or directory gmake[5]: [install-exec-hook] Error 1 (ignored) chmod u+s /usr/local/libexec/pulse/proximity-helper chmod: /usr/local/libexec/pulse/proximity-helper: No such file or directory gmake[5]: [install-exec-hook] Error 1 (ignored) ln -sf pacat /usr/local/bin/parec ln -sf pacat /usr/local/bin/pamon ln -sf pacat /usr/local/bin/paplay ln -sf pacat /usr/local/bin/parecord rm -f /usr/local/lib/libpulsedsp.la rm -f /usr/local/lib/pulse-0.9.17/modules/*.la gmake[5]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' test -z "/usr/local/share/pulseaudio/alsa-mixer/paths" || .././install-sh -c -d "/usr/local/share/pulseaudio/alsa-mixer/paths" test -z "/usr/local/share/pulseaudio/alsa-mixer/profile-sets" || .././install-sh -c -d "/usr/local/share/pulseaudio/alsa-mixer/profile-sets" test -z "/usr/local/etc/dbus-1/system.d" || .././install-sh -c -d "/usr/local/etc/dbus-1/system.d" install -o root -g wheel -m 444 daemon/pulseaudio-system.conf '/usr/local/etc/dbus-1/system.d' test -z "/usr/local/etc/pulse" || .././install-sh -c -d "/usr/local/etc/pulse" install -o root -g wheel -m 444 default.pa system.pa daemon.conf client.conf '/usr/local/etc/pulse' test -z "/usr/local/include/pulse" || .././install-sh -c -d "/usr/local/include/pulse" install -o root -g wheel -m 444 pulse/cdecl.h pulse/channelmap.h pulse/context.h pulse/def.h pulse/error.h pulse/ext-stream-restore.h pulse/gccmacro.h pulse/introspect.h pulse/mainloop-api.h pulse/mainloop-signal.h pulse/mainloop.h pulse/operation.h pulse/proplist.h pulse/pulseaudio.h pulse/rtclock.h pulse/sample.h pulse/scache.h pulse/simple.h pulse/stream.h pulse/subscribe.h pulse/thread-mainloop.h pulse/timeval.h pulse/utf8.h pulse/util.h pulse/version.h pulse/volume.h pulse/xmalloc.h pulse/browser.h pulse/glib-mainloop.h '/usr/local/include/pulse' test -z "/lib/udev/rules.d" || .././install-sh -c -d "/lib/udev/rules.d" test -z "/usr/local/etc/xdg/autostart" || .././install-sh -c -d "/usr/local/etc/xdg/autostart" install -o root -g wheel -m 444 daemon/pulseaudio.desktop '/usr/local/etc/xdg/autostart' gmake[4]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' Making install in doxygen gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' gmake[3]: Nothing to be done for `install-exec-am'. gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' Making install in man gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' gmake[3]: Nothing to be done for `install-exec-am'. test -z "/usr/local/man/man1" || .././install-sh -c -d "/usr/local/man/man1" install -o root -g wheel -m 444 pulseaudio.1 esdcompat.1 pax11publish.1 paplay.1 pacat.1 pacmd.1 pactl.1 pasuspender.1 padsp.1 pabrowse.1 '/usr/local/man/man1' test -z "/usr/local/man/man5" || .././install-sh -c -d "/usr/local/man/man5" install -o root -g wheel -m 444 pulse-daemon.conf.5 pulse-client.conf.5 default.pa.5 '/usr/local/man/man5' gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' Making install in po gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/po' linguas="as bn_IN ca cs de de_CH el es fi fr gu hi it ja kn ml mr nl or pa pl pt pt_BR sr sr@latin sv ta te uk zh_CN "; \ for lang in $linguas; do \ dir=/usr/local/share/locale/$lang/LC_MESSAGES; \ /bin/sh /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/install-sh -d $dir; \ if test -r $lang.gmo; then \ install -o root -g wheel -m 444 $lang.gmo $dir/pulseaudio.mo; \ echo "installing $lang.gmo as $dir/pulseaudio.mo"; \ else \ install -o root -g wheel -m 444 ./$lang.gmo $dir/pulseaudio.mo; \ echo "installing ./$lang.gmo as" \ "$dir/pulseaudio.mo"; \ fi; \ if test -r $lang.gmo.m; then \ install -o root -g wheel -m 444 $lang.gmo.m $dir/pulseaudio.mo.m; \ echo "installing $lang.gmo.m as $dir/pulseaudio.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ install -o root -g wheel -m 444 ./$lang.gmo.m \ $dir/pulseaudio.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/pulseaudio.mo.m"; \ else \ true; \ fi; \ fi; \ done installing as.gmo as /usr/local/share/locale/as/LC_MESSAGES/pulseaudio.mo installing bn_IN.gmo as /usr/local/share/locale/bn_IN/LC_MESSAGES/pulseaudio.mo installing ca.gmo as /usr/local/share/locale/ca/LC_MESSAGES/pulseaudio.mo installing cs.gmo as /usr/local/share/locale/cs/LC_MESSAGES/pulseaudio.mo installing de.gmo as /usr/local/share/locale/de/LC_MESSAGES/pulseaudio.mo installing de_CH.gmo as /usr/local/share/locale/de_CH/LC_MESSAGES/pulseaudio.mo installing el.gmo as /usr/local/share/locale/el/LC_MESSAGES/pulseaudio.mo installing es.gmo as /usr/local/share/locale/es/LC_MESSAGES/pulseaudio.mo installing fi.gmo as /usr/local/share/locale/fi/LC_MESSAGES/pulseaudio.mo installing fr.gmo as /usr/local/share/locale/fr/LC_MESSAGES/pulseaudio.mo installing gu.gmo as /usr/local/share/locale/gu/LC_MESSAGES/pulseaudio.mo installing hi.gmo as /usr/local/share/locale/hi/LC_MESSAGES/pulseaudio.mo installing it.gmo as /usr/local/share/locale/it/LC_MESSAGES/pulseaudio.mo installing ja.gmo as /usr/local/share/locale/ja/LC_MESSAGES/pulseaudio.mo installing kn.gmo as /usr/local/share/locale/kn/LC_MESSAGES/pulseaudio.mo installing ml.gmo as /usr/local/share/locale/ml/LC_MESSAGES/pulseaudio.mo installing mr.gmo as /usr/local/share/locale/mr/LC_MESSAGES/pulseaudio.mo installing nl.gmo as /usr/local/share/locale/nl/LC_MESSAGES/pulseaudio.mo installing or.gmo as /usr/local/share/locale/or/LC_MESSAGES/pulseaudio.mo installing pa.gmo as /usr/local/share/locale/pa/LC_MESSAGES/pulseaudio.mo installing pl.gmo as /usr/local/share/locale/pl/LC_MESSAGES/pulseaudio.mo installing pt.gmo as /usr/local/share/locale/pt/LC_MESSAGES/pulseaudio.mo installing pt_BR.gmo as /usr/local/share/locale/pt_BR/LC_MESSAGES/pulseaudio.mo installing sr.gmo as /usr/local/share/locale/sr/LC_MESSAGES/pulseaudio.mo installing sr@latin.gmo as /usr/local/share/locale/sr@latin/LC_MESSAGES/pulseaudio.mo installing sv.gmo as /usr/local/share/locale/sv/LC_MESSAGES/pulseaudio.mo installing ta.gmo as /usr/local/share/locale/ta/LC_MESSAGES/pulseaudio.mo installing te.gmo as /usr/local/share/locale/te/LC_MESSAGES/pulseaudio.mo installing uk.gmo as /usr/local/share/locale/uk/LC_MESSAGES/pulseaudio.mo installing zh_CN.gmo as /usr/local/share/locale/zh_CN/LC_MESSAGES/pulseaudio.mo gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/po' gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[3]: Nothing to be done for `install-exec-am'. test -z "/usr/local/libdata/pkgconfig" || ./install-sh -c -d "/usr/local/libdata/pkgconfig" install -o root -g wheel -m 444 libpulse.pc libpulse-simple.pc libpulse-browse.pc libpulse-mainloop-glib.pc '/usr/local/libdata/pkgconfig' gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[1]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' ===> Creating users and/or groups. Creating group `pulse' with gid `563'. Creating group `pulse-access' with gid `564'. Creating group `pulse-rt' with gid `557'. Creating user `pulse' with uid `563'. install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/default.pa /usr/local/etc/pulse/default.pa-dist install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/daemon.conf /usr/local/etc/pulse/daemon.conf-dist install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/client.conf /usr/local/etc/pulse/client.conf-dist install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/system.pa /usr/local/etc/pulse/system.pa-dist ===> Compressing manual pages for pulseaudio-0.9.17 ===> Running ldconfig /sbin/ldconfig -m /usr/local/lib ===> Registering installation for pulseaudio-0.9.17 ===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/lib/libpulsecommon-0.9.17.so If there are vulnerabilities in these programs there may be a security risk to the system. FreeBSD makes no guarantee about the security of ports included in the Ports Collection. Please type 'make deinstall' to deinstall the port if this is a concern. For more information, and contact details about the security status of this software, see the following webpage: http://pulseaudio.org/ ================================================================ ======================================== ===> Building package for pulseaudio-0.9.17 Creating package /tmp/packages/All/pulseaudio-0.9.17.tbz Registering depends: gconf2-2.26.2_1 gtk-2.16.6 atk-1.26.0 libsamplerate-0.1.7_1 libsndfile-1.0.20_1 flac-1.2.1_1 libvorbis-1.2.3,3 speex-1.2.r1_2,1 libogg-1.1.4,4 ORBit2-2.14.17 libIDL-0.8.13 avahi-app-0.6.25_2 hal-0.5.11_26 consolekit-0.3.0_8 policykit-0.9_5 dbus-glib-0.82 pango-1.24.5 shared-mime-info-0.60_1 gio-fam-backend-2.20.5 gamin-0.1.10_3 glib-2.20.5 gettext-0.17_1 dbus-1.2.4.6_1 libxml2-2.7.3_1 libiconv-1.13.1 gdbm-1.8.3_3 libdaemon-0.12 libexecinfo-1.1_3 libltdl-2.2.6a cairo-1.8.8,1 libXcursor-1.1.9_1 libXft-2.1.13 libXrandr-1.3.0 libXrender-0.9.4_1 libXdamage-1.1.1 libXcomposite-0.4.0,1 libXfixes-4.0.3_1 libXi-1.2.1,1 libXinerama-1.0.3,1 libXtst-1.0.3_1 libXext-1.0.5,1 libX11-1.2.1_1,1 xcb-util-0.3.6 libxcb-1.4 libpthread-stubs-0.1 libvolume_id-0.81.1 pcre-7.9 libXdmcp-1.0.2_1 libXau-1.0.4 xorg-fonts-truetype-7.4 font-bh-ttf-1.0.0 font-misc-ethiopic-1.0.0 font-misc-meltho-1.0.0_1 mkfontdir-1.0.4 mkfontscale-1.0.6 libfontenc-1.0.4 libSM-1.1.0_1,1 libICE-1.0.4_1,1 xproto-7.0.15 bitstream-vera-1.10_4 fontconfig-2.6.0,1 freetype2-2.3.9_1 pixman-0.15.4 fftw3-3.2.2_1 pkg-config-0.23_1 jasper-1.900.1_8 tiff-3.8.2_4 jpeg-7 png-1.2.38 perl-5.8.9_3 xcb-proto-1.5 python26-2.6.2_3 gnomehier-2.3_12 hicolor-icon-theme-0.10_2 pciids-20090807 dmidecode-2.10 gnome_subr-1.0 expat-2.0.1 encodings-1.0.2,1 font-util-1.0.1 compositeproto-0.4 damageproto-1.1.0_2 fixesproto-4.0 inputproto-1.5.0 kbproto-1.0.3 randrproto-1.3.0 recordproto-1.13.2 renderproto-0.9.3 xextproto-7.0.5 xineramaproto-1.1.2. Creating bzip'd tar ball in '/tmp/packages/All/pulseaudio-0.9.17.tbz' Deleting pulseaudio-0.9.17 ================================================================ === Checking filesystem state list of extra files and directories in / (not present before this port was installed but present after it was deinstalled) 1248315 4 drwxr-xr-x 3 root wheel 512 Sep 13 19:16 lib/udev 1248316 4 drwxr-xr-x 2 root wheel 512 Sep 13 19:16 lib/udev/rules.d 359297 4 drwxr-xr-x 3 root wheel 512 Sep 13 19:16 usr/local/share/pulseaudio 359320 4 drwxr-xr-x 4 root wheel 512 Sep 13 19:16 usr/local/share/pulseaudio/alsa-mixer 359322 4 drwxr-xr-x 2 root wheel 512 Sep 13 19:16 usr/local/share/pulseaudio/alsa-mixer/paths 359324 4 drwxr-xr-x 2 root wheel 512 Sep 13 19:16 usr/local/share/pulseaudio/alsa-mixer/profile-sets ================================================================ build of /usr/ports/audio/pulseaudio ended at Sun Sep 13 19:16:38 UTC 2009 - ----- End forwarded message ----- - -- +-----------------------+-------------------------------+ | PGP : 0xB1E6FCE9 | Jabber : miwi(at)BSDCrew.de | | Skype : splash_111 | Mail : miwi(at)FreeBSD.org | +-----------------------+-------------------------------+ | Mess with the Best, Die like the Rest! | +-----------------------+-------------------------------+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkqtR04ACgkQdLJIhLHm/OmLIgCgxf2IbczhEZUqOZwiN1SdHKNZ yB8An2kbbFhyJqrliUdN+6hFDXhyWmQJ =4Q+3 -----END PGP SIGNATURE----- From oberman at es.net Mon Sep 14 01:23:12 2009 From: oberman at es.net (Kevin Oberman) Date: Mon Sep 14 01:23:18 2009 Subject: hal/gnome-mount issues Message-ID: <20090914012304.DAF231CC37@ptavv.es.net> I have found that recent versions of gnome hare re-introduced problems that I thought had been resolved. The most annoying is not being able to dismount gnome-mount mounted volumes. Sometimes I get a message that the operation is not allowed. This seems to happen only on ufs volumes. If I issue the command as root (sudo gnome-mount -u), the volume is dismounted, but gnome-mount immediately re-mounts it. I have never succeeded in getting my UFS media to dismount and stay dismounted without stopping Gnome. Another is that the volume was not mounted by gnome-mount and must be dismounted outside of gnome. I checked /media/.hal-mtab and, as claimed, the volume is not listed. I can add it to .hal-mtab and then I can dismount it, but I get to the problems above. The volume is immediately re-mounted. A minor issue which may be related is that the volumes usually don't mount when they are plugged in. If they were plugged in when gnome was started, they seem to mount, but they don't when gnome is already up. This can be worked around by doing something to access the disk. I usually issue a manual mount command to mount it elsewhere in the FS (not in .media) and then dismount it, It immediately re-mounts in /media, but can never be dismounted for the reasons listed above. Finally, gnome-mount will always report errors because it tries to mount all three 'devices' created, /dev, /dev/ufs, and /dev/ufsid. I had thought that /dev/ufsid was not used, but it still seems to be and I often see a df listing the ufsid version as the mounted device. I suspect all of these are related, but I can't be sure. Any suggestions as to where to look? I see this under both 7.2 and 8.0. All ports are up to date and all were rebuilt from ports after the 8.0 upgrade. Thanks, -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From marcus at marcuscom.com Mon Sep 14 02:42:04 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Mon Sep 14 02:42:10 2009 Subject: hal/gnome-mount issues In-Reply-To: <20090914012304.DAF231CC37@ptavv.es.net> References: <20090914012304.DAF231CC37@ptavv.es.net> Message-ID: <1252896122.97925.201.camel@shumai.marcuscom.com> On Sun, 2009-09-13 at 18:23 -0700, Kevin Oberman wrote: > I have found that recent versions of gnome hare re-introduced problems > that I thought had been resolved. > > The most annoying is not being able to dismount gnome-mount mounted > volumes. Sometimes I get a message that the operation is not > allowed. This seems to happen only on ufs volumes. If I issue the > command as root (sudo gnome-mount -u), the volume is dismounted, but > gnome-mount immediately re-mounts it. I have never succeeded in getting > my UFS media to dismount and stay dismounted without stopping Gnome. > > Another is that the volume was not mounted by gnome-mount and must be > dismounted outside of gnome. I checked /media/.hal-mtab and, as claimed, > the volume is not listed. > > I can add it to .hal-mtab and then I can dismount it, but I get to the > problems above. The volume is immediately re-mounted. > > A minor issue which may be related is that the volumes usually don't > mount when they are plugged in. If they were plugged in when gnome was > started, they seem to mount, but they don't when gnome is already > up. This can be worked around by doing something to access the disk. I > usually issue a manual mount command to mount it elsewhere in the FS > (not in .media) and then dismount it, It immediately re-mounts in > /media, but can never be dismounted for the reasons listed above. > > Finally, gnome-mount will always report errors because it tries to mount > all three 'devices' created, /dev, /dev/ufs, and /dev/ufsid. I had > thought that /dev/ufsid was not used, but it still seems to be and I > often see a df listing the ufsid version as the mounted device. > > I suspect all of these are related, but I can't be sure. Any suggestions > as to where to look? I see this under both 7.2 and 8.0. All ports are up > to date and all were rebuilt from ports after the 8.0 upgrade. I think some, if not all of these problems will be fixed when GNOME 2.28 is imported. The hal 0.5.13 update includes ufsid support, so the duplicate mount problem should be gone. However, I don't have any user-mountable UFS file systems to really test. Joe > > Thanks, -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090914/618ac8b0/attachment.pgp From oberman at es.net Mon Sep 14 03:08:52 2009 From: oberman at es.net (Kevin Oberman) Date: Mon Sep 14 03:08:58 2009 Subject: hal/gnome-mount issues In-Reply-To: Your message of "Sun, 13 Sep 2009 22:42:02 EDT." <1252896122.97925.201.camel@shumai.marcuscom.com> Message-ID: <20090914030850.49B6F1CC37@ptavv.es.net> > From: Joe Marcus Clarke > Date: Sun, 13 Sep 2009 22:42:02 -0400 > > On Sun, 2009-09-13 at 18:23 -0700, Kevin Oberman wrote: > > I have found that recent versions of gnome hare re-introduced problems > > that I thought had been resolved. > > > > The most annoying is not being able to dismount gnome-mount mounted > > volumes. Sometimes I get a message that the operation is not > > allowed. This seems to happen only on ufs volumes. If I issue the > > command as root (sudo gnome-mount -u), the volume is dismounted, but > > gnome-mount immediately re-mounts it. I have never succeeded in getting > > my UFS media to dismount and stay dismounted without stopping Gnome. > > > > Another is that the volume was not mounted by gnome-mount and must be > > dismounted outside of gnome. I checked /media/.hal-mtab and, as claimed, > > the volume is not listed. > > > > I can add it to .hal-mtab and then I can dismount it, but I get to the > > problems above. The volume is immediately re-mounted. > > > > A minor issue which may be related is that the volumes usually don't > > mount when they are plugged in. If they were plugged in when gnome was > > started, they seem to mount, but they don't when gnome is already > > up. This can be worked around by doing something to access the disk. I > > usually issue a manual mount command to mount it elsewhere in the FS > > (not in .media) and then dismount it, It immediately re-mounts in > > /media, but can never be dismounted for the reasons listed above. > > > > Finally, gnome-mount will always report errors because it tries to mount > > all three 'devices' created, /dev, /dev/ufs, and /dev/ufsid. I had > > thought that /dev/ufsid was not used, but it still seems to be and I > > often see a df listing the ufsid version as the mounted device. > > > > I suspect all of these are related, but I can't be sure. Any suggestions > > as to where to look? I see this under both 7.2 and 8.0. All ports are up > > to date and all were rebuilt from ports after the 8.0 upgrade. > > I think some, if not all of these problems will be fixed when GNOME 2.28 > is imported. The hal 0.5.13 update includes ufsid support, so the > duplicate mount problem should be gone. However, I don't have any > user-mountable UFS file systems to really test. And, should I look for 2.28 soon after FBSD 8.0? -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From marcus at marcuscom.com Mon Sep 14 03:40:47 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Mon Sep 14 03:40:53 2009 Subject: hal/gnome-mount issues In-Reply-To: <20090914030850.49B6F1CC37@ptavv.es.net> References: <20090914030850.49B6F1CC37@ptavv.es.net> Message-ID: <1252899653.97925.202.camel@shumai.marcuscom.com> On Sun, 2009-09-13 at 20:08 -0700, Kevin Oberman wrote: > > From: Joe Marcus Clarke > > Date: Sun, 13 Sep 2009 22:42:02 -0400 > > > > On Sun, 2009-09-13 at 18:23 -0700, Kevin Oberman wrote: > > > I have found that recent versions of gnome hare re-introduced problems > > > that I thought had been resolved. > > > > > > The most annoying is not being able to dismount gnome-mount mounted > > > volumes. Sometimes I get a message that the operation is not > > > allowed. This seems to happen only on ufs volumes. If I issue the > > > command as root (sudo gnome-mount -u), the volume is dismounted, but > > > gnome-mount immediately re-mounts it. I have never succeeded in getting > > > my UFS media to dismount and stay dismounted without stopping Gnome. > > > > > > Another is that the volume was not mounted by gnome-mount and must be > > > dismounted outside of gnome. I checked /media/.hal-mtab and, as claimed, > > > the volume is not listed. > > > > > > I can add it to .hal-mtab and then I can dismount it, but I get to the > > > problems above. The volume is immediately re-mounted. > > > > > > A minor issue which may be related is that the volumes usually don't > > > mount when they are plugged in. If they were plugged in when gnome was > > > started, they seem to mount, but they don't when gnome is already > > > up. This can be worked around by doing something to access the disk. I > > > usually issue a manual mount command to mount it elsewhere in the FS > > > (not in .media) and then dismount it, It immediately re-mounts in > > > /media, but can never be dismounted for the reasons listed above. > > > > > > Finally, gnome-mount will always report errors because it tries to mount > > > all three 'devices' created, /dev, /dev/ufs, and /dev/ufsid. I had > > > thought that /dev/ufsid was not used, but it still seems to be and I > > > often see a df listing the ufsid version as the mounted device. > > > > > > I suspect all of these are related, but I can't be sure. Any suggestions > > > as to where to look? I see this under both 7.2 and 8.0. All ports are up > > > to date and all were rebuilt from ports after the 8.0 upgrade. > > > > I think some, if not all of these problems will be fixed when GNOME 2.28 > > is imported. The hal 0.5.13 update includes ufsid support, so the > > duplicate mount problem should be gone. However, I don't have any > > user-mountable UFS file systems to really test. > > And, should I look for 2.28 soon after FBSD 8.0? Yes. Joe -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090914/d0b7c6c0/attachment.pgp From bugmaster at FreeBSD.org Mon Sep 14 11:07:21 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Sep 14 11:10:15 2009 Subject: Current problem reports assigned to gnome@FreeBSD.org Message-ID: <200909141107.n8EB7LTw072725@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/138665 gnome Build fails of x11-toolkits/py-gtk2, dependent on wron f ports/138330 gnome x11/gnome2: in freebsd 8.0 beta3, hald segfaults withi f ports/137368 gnome x11-toolkits/libwnck: add menu option to configure dep s ports/137367 gnome net/libproxy: add menu option to configure dependence s ports/136967 gnome security/seahorse-plugins 2.26.2_1 + GPG = fail p ports/136676 gnome x11/gnome2: hald/GNOME (I guess) (re) mounted /usr and f ports/136435 gnome security/gnome-keyring + hald prevents umount of usb d p ports/134737 gnome Update www/webkit-gtk2 to 1.1.7 f ports/134536 gnome [patch] graphics/gimp: Gimp 2.6.6 fails to open URI's o ports/134509 gnome graphics/inkscape: after loading any type of data file a ports/134361 gnome devel/gvfs ports with smbclient support doesn't pass a f ports/134358 gnome x11/gnome2: trackerd uses up all of the cpu o ports/132304 gnome ports/devel/dbus misses /var/db/dbus/machine-id in dis 13 problems total. From mexas at bristol.ac.uk Mon Sep 14 15:07:54 2009 From: mexas at bristol.ac.uk (Anton Shterenlikht) Date: Mon Sep 14 15:09:08 2009 Subject: port security/nss fails to build on ia64, Error: Unknown opcode `bswap r14' Message-ID: <20090914150748.GA56589@mech-cluster241.men.bris.ac.uk> This seems to be a regression. FreeBSD 9.0-CURRENT ia64 nss-3.11.9_3 < needs updating (port has 3.12.4) On updating I see these errors: [skip] gmake[3]: Entering directory `/usr/ports/security/nss/work/nss-3.12.4/mozilla/se curity/nss/lib/freebl' cc -o FreeBSD9.0_OPT.OBJ/FreeBSD_SINGLE_SHLIB/sha_fast.o -c -O2 -pipe -I/usr/loc al/include/nspr -L/usr/local/lib -fno-strict-aliasing -O -fPIC -ansi -Wall -Wno- switch -DFREEBSD -DHAVE_STRERROR -DHAVE_BSD_FLOCK -DXP_UNIX -UDEBUG -DNDEBUG -D_ THREAD_SAFE -D_REENTRANT -DNSS_ENABLE_ECC -DUSE_UTIL_DIRECTLY -I../../dist/FreeB SD9.0_OPT.OBJ/include -I../../dist/public/ -I../../dist/private/ -O -fPIC -ansi -Wall -Wno-switch -DFREEBSD -DHAVE_STRERROR -DHAVE_BSD_FLOCK -DXP_UNIX -UDEBUG -DNDEBUG -D_THREAD_SAFE -D_REENTRANT -DNSS_ENABLE_ECC -DUSE_UTIL_DIRECTLY -I../. ./../dist/FreeBSD9.0_OPT.OBJ/include -I../../../dist/public/ -I../../../dist/pri vate/ -O -fPIC -ansi -Wall -Wno-switch -DFREEBSD -DHAVE_STRERROR -DHAVE_BSD_FLO CK -DXP_UNIX -DSHLIB_SUFFIX=\"so.1\" -DSHLIB_PREFIX=\"lib\" -DSHLIB_VERSION=\"3\ " -DSOFTOKEN_SHLIB_VERSION=\"3\" -DRIJNDAEL_INCLUDE_TABLES -UDEBUG -DNDEBUG -D_T HREAD_SAFE -D_REENTRANT -DNSS_ENABLE_ECC -DUSE_UTIL_DIRECTLY -DNSS_X86_OR_X64 -D NSS_X86 -DMP_API_COMPATIBLE -I../../../../dist/FreeBSD9.0_OPT.OBJ/include -I../. ./../../dist/public/nss -I../../../../dist/private/nss -Impi -Iecl -O -fPIC -an si -Wall -Wno-switch -DFREEBSD -DHAVE_STRERROR -DHAVE_BSD_FLOCK -DXP_UNIX -DSHLI B_SUFFIX=\"so.1\" -DSHLIB_PREFIX=\"lib\" -DSHLIB_VERSION=\"3\" -DSOFTOKEN_SHLIB_ VERSION=\"3\" -DRIJNDAEL_INCLUDE_TABLES -UDEBUG -DNDEBUG -D_THREAD_SAFE -D_REENT RANT -DNSS_ENABLE_ECC -DUSE_UTIL_DIRECTLY -DNSS_X86_OR_X64 -DNSS_X86 -DMP_API_CO MPATIBLE -I../../../../dist/FreeBSD9.0_OPT.OBJ/include -I../../../../dist/public /nss -I../../../../dist/private/nss -Impi -Iecl sha_fast.c {standard input}: Assembler messages: {standard input}:63: Error: Unknown opcode `bswap r14' {standard input}:98: Error: Unknown opcode `bswap r14' {standard input}:135: Error: Unknown opcode `bswap r14' {standard input}:171: Error: Unknown opcode `bswap r14' {standard input}:207: Error: Unknown opcode `bswap r14' {standard input}:243: Error: Unknown opcode `bswap r14' {standard input}:278: Error: Unknown opcode `bswap r14' {standard input}:315: Error: Unknown opcode `bswap r14' {standard input}:351: Error: Unknown opcode `bswap r14' {standard input}:387: Error: Unknown opcode `bswap r14' {standard input}:423: Error: Unknown opcode `bswap r14' {standard input}:459: Error: Unknown opcode `bswap r14' {standard input}:495: Error: Unknown opcode `bswap r14' {standard input}:531: Error: Unknown opcode `bswap r14' {standard input}:567: Error: Unknown opcode `bswap r14' {standard input}:603: Error: Unknown opcode `bswap r14' {standard input}:3585: Error: Unknown opcode `bswap r14' {standard input}:3591: Error: Unknown opcode `bswap r35' {standard input}:3605: Error: Unknown opcode `bswap r14' {standard input}:3615: Error: Unknown opcode `bswap r14' {standard input}:3625: Error: Unknown opcode `bswap r14' {standard input}:3635: Error: Unknown opcode `bswap r14' {standard input}:3645: Error: Unknown opcode `bswap r14' gmake[3]: *** [FreeBSD9.0_OPT.OBJ/FreeBSD_SINGLE_SHLIB/sha_fast.o] Error 1 gmake[3]: Leaving directory `/usr/ports/security/nss/work/nss-3.12.4/mozilla/sec urity/nss/lib/freebl' gmake[2]: *** [libs] Error 2 gmake[2]: Leaving directory `/usr/ports/security/nss/work/nss-3.12.4/mozilla/sec urity/nss/lib/freebl' gmake[1]: *** [libs] Error 2 gmake[1]: Leaving directory `/usr/ports/security/nss/work/nss-3.12.4/mozilla/sec urity/nss/lib' gmake: *** [libs] Error 2 *** Error code 1 Stop in /usr/ports/security/nss. *** Error code 1 Please advise many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 331 5924 From orca at tdlsoftware.org Tue Sep 15 12:34:08 2009 From: orca at tdlsoftware.org (Peter Laursen) Date: Tue Sep 15 12:34:20 2009 Subject: Firefox 3 and Orca: Accessibility issues] Message-ID: <25111.192.38.44.250.1253016291.squirrel@tdlsoftware.org> Hello everybody, Previously, I wrote to this list stating that Firefox 3 was not accessible with Orca, a screen reader allowing blind and visually impaired people to navigate around Gnome and interact with various applications. Since then, I have investigated the matter further and have found some interesting things: If Gnome 2.26.3 is built from packages, Firefox and Orca *do* work together as they are supposed to, meaning that visually impaired people can browse the web without booting into secondary operating systems. My question, therefore, is the following: With what options is the Gnome desktop built? Particularly, what Gecko engine is used in the built packages? I am running the latest FreeBSD 8.0-BETA4 at the test machine I used for the purpose of building Gnome. * If one builds Gnome from ports (as I did yesterday), things do not go that well. Orca and Firefox are then unable to communicate, leaving one with the previous situation of not being able to browse the web. This leads me to a second question: Is there any way of seeing what Gecko engine (xulrunner etc) is being used? Can it be easily changed? As for the make config-recursive-step, I just pressed "OK", leaving the configurations in the default state. I look forward to hearing from you and will of course be willing to do some further testing. Best regards, Peter. P.S.: Orca and Firefox 2 has never been able to communicate - one would therefore only use Firefox 3.0 or 3.5 From orca at tdlsoftware.org Tue Sep 15 12:34:09 2009 From: orca at tdlsoftware.org (Peter Laursen) Date: Tue Sep 15 12:34:21 2009 Subject: Firefox 3 and Orca: Accessibility issues Message-ID: <11597.192.38.44.250.1253015826.squirrel@tdlsoftware.org> Hello everybody, Previously, I wrote to this list stating that Firefox 3 was not accessible with Orca, a screen reader allowing blind and visually impaired people to navigate around Gnome and interact with various applications. Since then, I have investigated the matter further and have found some interesting things: If Gnome 2.26.3 is built from packages, Firefox and Orca *do* work together as they are supposed to, meaning that visually impaired people can browse the web without booting into secondary operating systems. My question, therefore, is the following: With what options is the Gnome desktop built? Particularly, what Gecko engine is used in the built packages? I am running the latest FreeBSD 8.0-BETA4 at the test machine I used for the purpose of building Gnome. * If one builds Gnome from ports (as I did yesterday), things do not go that well. Orca and Firefox are then unable to communicate, leaving one with the previous situation of not being able to browse the web. This leads me to a second question: Is there any way of seeing what Gecko engine (xulrunner etc) is being used? Can it be easily changed? As for the make config-recursive-step, I just pressed "OK", leaving the configurations in the default state. I look forward to hearing from you and will of course be willing to do some further testing. Best regards, Peter. P.S.: Orca and Firefox 2 has never been able to communicate - one would therefore only use Firefox 3.0 or 3.5 From miwi at FreeBSD.org Tue Sep 15 16:06:38 2009 From: miwi at FreeBSD.org (Martin Wilke) Date: Tue Sep 15 16:06:49 2009 Subject: [ports-i386@FreeBSD.org: pulseaudio-0.9.17 failed on i386 8] Message-ID: <20090915160631.GD69992@bsdcrew.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - ----- Forwarded message from User Ports-i386 ----- Date: Tue, 15 Sep 2009 15:53:15 GMT From: User Ports-i386 To: erwin@FreeBSD.org, miwi@FreeBSD.org, linimon@FreeBSD.org, flz@FreeBSD.org Subject: pulseaudio-0.9.17 failed on i386 8 X-Spam-Status: No, score=-106.5 required=5.0 tests=AWL,BAYES_00, RCVD_IN_DNSWL_MED,USER_IN_WHITELIST autolearn=ham version=3.2.5 Excerpt from the build log at http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.8.20090911172956/pulseaudio-0.9.17.log building pulseaudio-0.9.17 on gohan48.freebsd.org in directory /x/tmp/8/20090911172956/chroot/5 building for: 8.0-BETA4 i386 maintained by: gnome@FreeBSD.org port directory: /usr/ports/audio/pulseaudio Makefile ident: $FreeBSD: ports/audio/pulseaudio/Makefile,v 1.50 2009/09/11 05:55:45 marcus Exp $ [... lines trimmed ...] && rm -f $file && /usr/local/bin/msgfmt -o $file ca.po file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file cs.po file=`echo de | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file de.po file=`echo de_CH | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file de_CH.po file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file el.po file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file es.po file=`echo fi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file fi.po file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file fr.po file=`echo gu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file gu.po file=`echo hi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file hi.po file=`echo it | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file it.po file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ja.po file=`echo kn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file kn.po file=`echo ml | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ml.po file=`echo mr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file mr.po file=`echo nl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file nl.po file=`echo or | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file or.po file=`echo pa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pa.po file=`echo pl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pl.po file=`echo pt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pt.po file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pt_BR.po file=`echo sr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file sr.po file=`echo sr@latin | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file sr@latin.po file=`echo sv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file sv.po file=`echo ta | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ta.po file=`echo te | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file te.po file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file uk.po file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file zh_CN.po gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/po' gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[2]: Nothing to be done for `all-am'. gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[1]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' ================================================================ ======================================== make: don't know how to make regression-test(continuing) ================================================================ ======================================== add_pkg ORBit2-2.14.17.tbz atk-1.26.0.tbz avahi-app-0.6.25_2.tbz bitstream-vera-1.10_4.tbz cairo-1.8.8,1.tbz compositeproto-0.4.tbz consolekit-0.3.0_8.tbz damageproto-1.1.0_2.tbz dbus-1.2.4.6_1.tbz dbus-glib-0.82.tbz dmidecode-2.10.tbz encodings-1.0.2,1.tbz expat-2.0.1.tbz fftw3-3.2.2_1.tbz fixesproto-4.0.tbz flac-1.2.1_1.tbz font-bh-ttf-1.0.0.tbz font-misc-ethiopic-1.0.0.tbz font-misc-meltho-1.0.0_1.tbz font-util-1.0.1.tbz fontconfig-2.6.0,1.tbz freetype2-2.3.9_1.tbz gamin-0.1.10_3.tbz gconf2-2.26.2_1.tbz gdbm-1.8.3_3.tbz gettext-0.17_1.tbz gio-fam-backend-2.20.5.tbz glib-2.20.5.tbz gnome_subr-1.0.tbz gnomehier-2.3_12.tbz gtk-2.16.6.tbz hal-0.5.11_26.tbz hicolor-icon-theme-0.10_2.tbz inputproto-1.5.0.tbz jasper-1.900.1_8.tbz jpeg-7.tbz kbproto-1.0.3.tbz libICE-1.0.4_1,1.tbz libIDL-0.8.13.tbz libSM-1.1.0_1,1.tbz libX11-1.2.1_1,1.tbz libXau-1.0.4.tbz libXcomposite-0.4.0,1.tbz libXcursor-1.1.9_1.tbz libXdamage-1.1.1.tbz libXdmcp-1.0.2_1.tbz libXext-1.0.5,1.tbz libXfixes-4.0.3_1 .tbz libXft-2.1.13.tbz libXi-1.2.1,1.tbz libXinerama-1.0.3,1.tbz libXrandr-1.3.0.tbz libXrender-0.9.4_1.tbz libXtst-1.0.3_1.tbz libdaemon-0.12.tbz libexecinfo-1.1_3.tbz libfontenc-1.0.4.tbz libiconv-1.13.1.tbz libltdl-2.2.6a.tbz libogg-1.1.4,4.tbz libpthread-stubs-0.1.tbz libsamplerate-0.1.7_1.tbz libsndfile-1.0.20_1.tbz libvolume_id-0.81.1.tbz libvorbis-1.2.3,3.tbz libxcb-1.4.tbz libxml2-2.7.3_1.tbz mkfontdir-1.0.4.tbz mkfontscale-1.0.6.tbz pango-1.24.5.tbz pciids-20090807.tbz pcre-7.9.tbz perl-5.8.9_3.tbz pixman-0.15.4.tbz pkg-config-0.23_1.tbz png-1.2.38.tbz policykit-0.9_5.tbz python26-2.6.2_3.tbz randrproto-1.3.0.tbz recordproto-1.13.2.tbz renderproto-0.9.3.tbz shared-mime-info-0.60_1.tbz speex-1.2.r1_2,1.tbz tiff-3.8.2_4.tbz xcb-proto-1.5.tbz xcb-util-0.3.6.tbz xextproto-7.0.5.tbz xineramaproto-1.1.2.tbz xorg-fonts-truetype-7.4.tbz xproto-7.0.15.tbz adding dependencies pkg_add ORBit2-2.14.17.tbz skipping ORBit2-2.14.17, already added pkg_add atk-1.26.0.tbz skipping atk-1.26.0, already added pkg_add avahi-app-0.6.25_2.tbz skipping avahi-app-0.6.25_2, already added pkg_add bitstream-vera-1.10_4.tbz skipping bitstream-vera-1.10_4, already added pkg_add cairo-1.8.8,1.tbz skipping cairo-1.8.8,1, already added pkg_add compositeproto-0.4.tbz skipping compositeproto-0.4, already added pkg_add consolekit-0.3.0_8.tbz skipping consolekit-0.3.0_8, already added pkg_add damageproto-1.1.0_2.tbz skipping damageproto-1.1.0_2, already added pkg_add dbus-1.2.4.6_1.tbz skipping dbus-1.2.4.6_1, already added pkg_add dbus-glib-0.82.tbz skipping dbus-glib-0.82, already added pkg_add dmidecode-2.10.tbz skipping dmidecode-2.10, already added pkg_add encodings-1.0.2,1.tbz skipping encodings-1.0.2,1, already added pkg_add expat-2.0.1.tbz skipping expat-2.0.1, already added pkg_add fftw3-3.2.2_1.tbz skipping fftw3-3.2.2_1, already added pkg_add fixesproto-4.0.tbz skipping fixesproto-4.0, already added pkg_add flac-1.2.1_1.tbz skipping flac-1.2.1_1, already added pkg_add font-bh-ttf-1.0.0.tbz skipping font-bh-ttf-1.0.0, already added pkg_add font-misc-ethiopic-1.0.0.tbz skipping font-misc-ethiopic-1.0.0, already added pkg_add font-misc-meltho-1.0.0_1.tbz skipping font-misc-meltho-1.0.0_1, already added pkg_add font-util-1.0.1.tbz skipping font-util-1.0.1, already added pkg_add fontconfig-2.6.0,1.tbz skipping fontconfig-2.6.0,1, already added pkg_add freetype2-2.3.9_1.tbz skipping freetype2-2.3.9_1, already added pkg_add gamin-0.1.10_3.tbz skipping gamin-0.1.10_3, already added pkg_add gconf2-2.26.2_1.tbz skipping gconf2-2.26.2_1, already added pkg_add gdbm-1.8.3_3.tbz skipping gdbm-1.8.3_3, already added pkg_add gettext-0.17_1.tbz skipping gettext-0.17_1, already added pkg_add gio-fam-backend-2.20.5.tbz skipping gio-fam-backend-2.20.5, already added pkg_add glib-2.20.5.tbz skipping glib-2.20.5, already added pkg_add gnome_subr-1.0.tbz skipping gnome_subr-1.0, already added pkg_add gnomehier-2.3_12.tbz skipping gnomehier-2.3_12, already added pkg_add gtk-2.16.6.tbz skipping gtk-2.16.6, already added pkg_add hal-0.5.11_26.tbz skipping hal-0.5.11_26, already added pkg_add hicolor-icon-theme-0.10_2.tbz skipping hicolor-icon-theme-0.10_2, already added pkg_add inputproto-1.5.0.tbz skipping inputproto-1.5.0, already added pkg_add jasper-1.900.1_8.tbz skipping jasper-1.900.1_8, already added pkg_add jpeg-7.tbz skipping jpeg-7, already added pkg_add kbproto-1.0.3.tbz skipping kbproto-1.0.3, already added pkg_add libICE-1.0.4_1,1.tbz skipping libICE-1.0.4_1,1, already added pkg_add libIDL-0.8.13.tbz skipping libIDL-0.8.13, already added pkg_add libSM-1.1.0_1,1.tbz skipping libSM-1.1.0_1,1, already added pkg_add libX11-1.2.1_1,1.tbz skipping libX11-1.2.1_1,1, already added pkg_add libXau-1.0.4.tbz skipping libXau-1.0.4, already added pkg_add libXcomposite-0.4.0,1.tbz skipping libXcomposite-0.4.0,1, already added pkg_add libXcursor-1.1.9_1.tbz skipping libXcursor-1.1.9_1, already added pkg_add libXdamage-1.1.1.tbz skipping libXdamage-1.1.1, already added pkg_add libXdmcp-1.0.2_1.tbz skipping libXdmcp-1.0.2_1, already added pkg_add libXext-1.0.5,1.tbz skipping libXext-1.0.5,1, already added pkg_add libXfixes-4.0.3_1.tbz skipping libXfixes-4.0.3_1, already added pkg_add libXft-2.1.13.tbz skipping libXft-2.1.13, already added pkg_add libXi-1.2.1,1.tbz skipping libXi-1.2.1,1, already added pkg_add libXinerama-1.0.3,1.tbz skipping libXinerama-1.0.3,1, already added pkg_add libXrandr-1.3.0.tbz skipping libXrandr-1.3.0, already added pkg_add libXrender-0.9.4_1.tbz skipping libXrender-0.9.4_1, already added pkg_add libXtst-1.0.3_1.tbz skipping libXtst-1.0.3_1, already added pkg_add libdaemon-0.12.tbz skipping libdaemon-0.12, already added pkg_add libexecinfo-1.1_3.tbz skipping libexecinfo-1.1_3, already added pkg_add libfontenc-1.0.4.tbz skipping libfontenc-1.0.4, already added pkg_add libiconv-1.13.1.tbz skipping libiconv-1.13.1, already added pkg_add libltdl-2.2.6a.tbz skipping libltdl-2.2.6a, already added pkg_add libogg-1.1.4,4.tbz skipping libogg-1.1.4,4, already added pkg_add libpthread-stubs-0.1.tbz skipping libpthread-stubs-0.1, already added pkg_add libsamplerate-0.1.7_1.tbz skipping libsamplerate-0.1.7_1, already added pkg_add libsndfile-1.0.20_1.tbz skipping libsndfile-1.0.20_1, already added pkg_add libvolume_id-0.81.1.tbz skipping libvolume_id-0.81.1, already added pkg_add libvorbis-1.2.3,3.tbz skipping libvorbis-1.2.3,3, already added pkg_add libxcb-1.4.tbz skipping libxcb-1.4, already added pkg_add libxml2-2.7.3_1.tbz skipping libxml2-2.7.3_1, already added pkg_add mkfontdir-1.0.4.tbz skipping mkfontdir-1.0.4, already added pkg_add mkfontscale-1.0.6.tbz skipping mkfontscale-1.0.6, already added pkg_add pango-1.24.5.tbz skipping pango-1.24.5, already added pkg_add pciids-20090807.tbz skipping pciids-20090807, already added pkg_add pcre-7.9.tbz skipping pcre-7.9, already added pkg_add perl-5.8.9_3.tbz skipping perl-5.8.9_3, already added pkg_add pixman-0.15.4.tbz skipping pixman-0.15.4, already added pkg_add pkg-config-0.23_1.tbz skipping pkg-config-0.23_1, already added pkg_add png-1.2.38.tbz skipping png-1.2.38, already added pkg_add policykit-0.9_5.tbz skipping policykit-0.9_5, already added pkg_add python26-2.6.2_3.tbz skipping python26-2.6.2_3, already added pkg_add randrproto-1.3.0.tbz skipping randrproto-1.3.0, already added pkg_add recordproto-1.13.2.tbz skipping recordproto-1.13.2, already added pkg_add renderproto-0.9.3.tbz skipping renderproto-0.9.3, already added pkg_add shared-mime-info-0.60_1.tbz skipping shared-mime-info-0.60_1, already added pkg_add speex-1.2.r1_2,1.tbz skipping speex-1.2.r1_2,1, already added pkg_add tiff-3.8.2_4.tbz skipping tiff-3.8.2_4, already added pkg_add xcb-proto-1.5.tbz skipping xcb-proto-1.5, already added pkg_add xcb-util-0.3.6.tbz skipping xcb-util-0.3.6, already added pkg_add xextproto-7.0.5.tbz skipping xextproto-7.0.5, already added pkg_add xineramaproto-1.1.2.tbz skipping xineramaproto-1.1.2, already added pkg_add xorg-fonts-truetype-7.4.tbz skipping xorg-fonts-truetype-7.4, already added pkg_add xproto-7.0.15.tbz skipping xproto-7.0.15, already added ===> Installing for pulseaudio-0.9.17 ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/sm.pc - found ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/xtst.pc - found ===> pulseaudio-0.9.17 depends on file: /usr/local/libdata/pkgconfig/ice.pc - found ===> pulseaudio-0.9.17 depends on executable: pkg-config - found ===> pulseaudio-0.9.17 depends on file: /usr/local/lib/gio/modules/libgiofam.so - found ===> pulseaudio-0.9.17 depends on shared library: samplerate.1 - found ===> pulseaudio-0.9.17 depends on shared library: speexdsp.1 - found ===> pulseaudio-0.9.17 depends on shared library: dbus-1.3 - found ===> pulseaudio-0.9.17 depends on shared library: gdbm.3 - found ===> pulseaudio-0.9.17 depends on shared library: execinfo - found ===> pulseaudio-0.9.17 depends on shared library: avahi-client.3 - found ===> pulseaudio-0.9.17 depends on shared library: hal.1 - found ===> pulseaudio-0.9.17 depends on shared library: intl - found ===> pulseaudio-0.9.17 depends on shared library: ltdl.7 - found ===> pulseaudio-0.9.17 depends on shared library: atk-1.0.0 - found ===> pulseaudio-0.9.17 depends on shared library: gconf-2.4 - found ===> pulseaudio-0.9.17 depends on shared library: glib-2.0.0 - found ===> pulseaudio-0.9.17 depends on shared library: gtk-x11-2.0.0 - found ===> pulseaudio-0.9.17 depends on shared library: IDL-2.0 - found ===> pulseaudio-0.9.17 depends on shared library: xml2.5 - found ===> pulseaudio-0.9.17 depends on shared library: ORBit-2.0 - found ===> pulseaudio-0.9.17 depends on shared library: pango-1.0.0 - found ===> Generating temporary packing list ===> Checking if audio/pulseaudio already installed gmake install-recursive gmake[1]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' Making install in src gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake install-am gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake[4]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' test -z "/usr/local/lib" || .././install-sh -c -d "/usr/local/lib" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install /usr/bin/install -c -o root -g wheel libpulsecommon-0.9.17.la libpulse.la libpulse-simple.la libpulse-browse.la libpulse-mainloop-glib.la libpulsedsp.la libpulsecore-0.9.17.la '/usr/local/lib' gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecommon-0.9.17.so /usr/local/lib/libpulsecommon-0.9.17.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecommon-0.9.17.lai /usr/local/lib/libpulsecommon-0.9.17.la gnome-libtool: install: warning: relinking `libpulse.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics -show-option -Wl,-z,nodelete -Wl,-version-script=./map-file ! -version-info 10:0:10 -L/usr/local/lib -lX11 -lSM -lICE -lXtst -L/usr/local/lib -o libpulse.la -rpath /usr/local/lib libpulse_la-channelmap.lo libpulse_la-context.lo libpulse_la-error.lo libpulse_la-ext-stream-restore.lo libpulse_la-introspect.lo libpulse_la-mainloop-api.lo libpulse_la-mainloop-signal.lo libpulse_la-mainloop.lo libpulse_la-operation.lo libpulse_la-proplist.lo libpulse_la-rtclock.lo libpulse_la-sample.lo libpulse_la-scache.lo libpulse_la-stream.lo libpulse_la-subscribe.lo libpulse_la-thread-mainloop.lo libpulse_la-timeval.lo libpulse_la-utf8.lo libpulse_la-util.lo libpulse_la-volume.lo libpulse_la-xmalloc.lo libpulse_la-client-conf-x11.lo -pthread libpulsecommon-0.9.17.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse.so.0T /usr/local/lib/libpulse.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse.so.0 libpulse.so || { rm -f libpulse.so && ln -s libpulse.so.0 libpulse.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse.so.0 libpulse.so || { rm -f libpulse.so && ln -s libpulse.so.0 libpulse.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse.lai /usr/local/lib/libpulse.la gnome-libtool: install: warning: relinking `libpulse-simple.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -Wl,-version-script=./map-file -version-info 0:3:0 -L/usr/local/lib -o libp ulse-simple.la -rpath /usr/local/lib libpulse_simple_la-simp! le.lo -pthread libpulse.la libpulsecommon-0.9.17.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-simple.so.0T /usr/local/lib/libpulse-simple.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-simple.so.0 libpulse-simple.so || { rm -f libpulse-simple.so && ln -s libpulse-simple.so.0 libpulse-simple.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-simple.so.0 libpulse-simple.so || { rm -f libpulse-simple.so && ln -s libpulse-simple.so.0 libpulse-simple.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-simple.lai /usr/local/lib/libpulse-simple.la gnome-libtool: install: warning: relinking `libpulse-browse.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -Wl,-version-script=./map- file -version-info 1:1:1 -L/usr/local/lib -o libpulse-browse! .la -rpath /usr/local/lib libpulse_browse_la-browser.lo libpulse_browse_la-avahi-wrap.lo -pthread libpulse.la libpulsecommon-0.9.17.la -pthread -L/usr/local/lib -lavahi-common -lavahi-client -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-browse.so.0T /usr/local/lib/libpulse-browse.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-browse.so.0 libpulse-browse.so || { rm -f libpulse-browse.so && ln -s libpulse-browse.so.0 libpulse-browse.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-browse.so.0 libpulse-browse.so || { rm -f libpulse-browse.so && ln -s libpulse-browse.so.0 libpulse-browse.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-browse.lai /usr/local/lib/libpulse-browse.la gnome-libtool: install: warning: relinking `libpulse-mainloop-glib.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -Wl,-versio n-script=./map-file -version-info 0:4:0 -L/usr/local/lib -o ! libpulse-mainloop-glib.la -rpath /usr/local/lib libpulse_mainloop_glib_la-glib-mainloop.lo -pthread libpulse.la libpulsecommon-0.9.17.la -L/usr/local/lib -lglib-2.0 -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-mainloop-glib.so.0T /usr/local/lib/libpulse-mainloop-glib.so.0 gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so || { rm -f libpulse-mainloop-glib.so && ln -s libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so; }; }) gnome-libtool: install: (cd /usr/local/lib && { ln -s -f libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so || { rm -f libpulse-mainloop-glib.so && ln -s libpulse-mainloop-glib.so.0 libpulse-mainloop-glib.so; }; }) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-mainloop-glib.lai /usr/local/lib/libpulse-mainloop-glib.la gnome-libtool: install: warning: relinking `libpulsedsp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -Wl,-z,nodelete -avoid-version -disable-static -L/usr/local/lib -o libpulsedsp.la -rpath /u sr/local/lib libpulsedsp_la-padsp.lo -pthread libpulse.la li! bpulsecommon-0.9.17.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsedsp.soT /usr/local/lib/libpulsedsp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsedsp.lai /usr/local/lib/libpulsedsp.la gnome-libtool: install: warning: relinking `libpulsecore-0.9.17.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include -I/usr/local/include -D_THREAD_SAFE -I/usr/local/include -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_ FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoi! d-version -L/usr/local/lib -lX11 -lSM -lICE -lXtst -L/usr/local/lib -o libpulsecore-0.9.17.la -rpath /usr/local/lib libpulsecore_0.9.17_la-asyncmsgq.lo libpulsecore_0.9.17_la-asyncq.lo libpulsecore_0.9.17_la-auth-cookie.lo libpulsecore_0.9.17_la-cli-command.lo libpulsecore_0.9.17_la-cli-text.lo libpulsecore_0.9.17_la-client.lo libpulsecore_0.9.17_la-card.lo libpulsecore_0.9.17_la-core-scache.lo libpulsecore_0.9.17_la-core-subscribe.lo libpulsecore_0.9.17_la-core.lo libpulsecore_0.9.17_la-envelope.lo libpulsecore_0.9.17_la-fdsem.lo libpulsecore_0.9.17_la-g711.lo libpulsecore_0.9.17_la-hook-list.lo libpulsecore_0.9.17_la-ltdl-helper.lo libpulsecore_0.9.17_la-modargs.lo libpulsecore_0.9.17_la-modinfo.lo libpulsecore_0.9.17_la-module.lo libpulsecore_0.9.17_la-msgobject.lo libpulsecore_0.9.17_la-namereg.lo libpulsecore_0.9.17_la-object.lo libpulsecore_0.9.17_la-play-memblockq.lo libpulsecore_0.9.17_la-play-memchunk.lo libpulsecore_0.9.17_la-remap.lo libpulsecore_0.9.17_la-remap_m mx.lo libpulsecore_0.9.17_la-remap_sse.lo libpulsecore_0.9.17_la-resampler.lo libpulsecore_0.9.17_la-rtpoll.lo libpulsecore_0.9.17_la-sample-util.lo libpulsecore_0.9.17_la-cpu-arm.lo libpulsecore_0.9.17_la-cpu-x86.lo libpulsecore_0.9.17_la-svolume_c.lo libpulsecore_0.9.17_la-svolume_arm.lo libpulsecore_0.9.17_la-svolume_mmx.lo libpulsecore_0.9.17_la-svolume_sse.lo libpulsecore_0.9.17_la-sconv-s16be.lo libpulsecore_0.9.17_la-sconv-s16le.lo libpulsecore_0.9.17_la-sconv_sse.lo libpulsecore_0.9.17_la-sconv.lo libpulsecore_0.9.17_la-shared.lo libpulsecore_0.9.17_la-shm.lo libpulsecore_0.9.17_la-sink-input.lo libpulsecore_0.9.17_la-sink.lo libpulsecore_0.9.17_la-sioman.lo libpulsecore_0.9.17_la-sound-file-stream.lo libpulsecore_0.9.17_la-sound-file.lo libpulsecore_0.9.17_la-source-output.lo libpulsecore_0.9.17_la-source.lo libpulsecore_0.9.17_la-start-child.lo libpulsecore_0.9.17_la-thread-mq.lo libpulsecore_0.9.17_la-time-smoother.lo libpulsecore_0.9.17_la-x11wrap.lo libpulsecore _0.9.17_la-dbus-shared.lo libpulsecore_0.9.17_la-database-gd! bm.lo -pt! hread -lltdl -L/usr/local/lib -lsamplerate -L/usr/local/lib -lspeexdsp libpulsecommon-0.9.17.la libpulse.la libpulsecore-foreign.la -L/usr/local/lib -ldbus-1 -lgdbm -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecore-0.9.17.soT /usr/local/lib/libpulsecore-0.9.17.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecore-0.9.17.lai /usr/local/lib/libpulsecore-0.9.17.la gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecommon-0.9.17.a /usr/local/lib/libpulsecommon-0.9.17.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulsecommon-0.9.17.a gnome-libtool: install: ranlib /usr/local/lib/libpulsecommon-0.9.17.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse.a /usr/local/lib/libpulse.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse.a gnome-libtool: install: ranlib /usr/local/lib/libpulse.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-simple.a /usr/local/lib/libpulse-simple.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse-simple.a gnome-libtool: install: ranlib /usr/local/lib/libpulse-simple.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-browse.a /usr/local/lib/libpulse-browse.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse-browse.a gnome-libtool: install: ranlib /usr/local/lib/libpulse-browse.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulse-mainloop-glib.a /usr/local/lib/libpulse-mainloop-glib.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulse-mainloop-glib.a gnome-libtool: install: ranlib /usr/local/lib/libpulse-mainloop-glib.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsedsp.a /usr/local/lib/libpulsedsp.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulsedsp.a gnome-libtool: install: ranlib /usr/local/lib/libpulsedsp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpulsecore-0.9.17.a /usr/local/lib/libpulsecore-0.9.17.a gnome-libtool: install: chmod 644 /usr/local/lib/libpulsecore-0.9.17.a gnome-libtool: install: ranlib /usr/local/lib/libpulsecore-0.9.17.a - ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. - ---------------------------------------------------------------------- test -z "/usr/local/bin" || .././install-sh -c -d "/usr/local/bin" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install install -s -o root -g wheel -m 555 pulseaudio pacat pactl pasuspender pacmd pax11publish pabrowse '/usr/local/bin' gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pulseaudio /usr/local/bin/pulseaudio gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pacat /usr/local/bin/pacat gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pactl /usr/local/bin/pactl gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pasuspender /usr/local/bin/pasuspender gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pacmd /usr/local/bin/pacmd gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pax11publish /usr/local/bin/pax11publish gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/pabrowse /usr/local/bin/pabrowse test -z "/usr/local/bin" || .././install-sh -c -d "/usr/local/bin" install -o root -g wheel -m 555 esdcompat start-pulseaudio-x11 utils/padsp '/usr/local/bin' test -z "/usr/local/lib/pulse-0.9.17/modules" || .././install-sh -c -d "/usr/local/lib/pulse-0.9.17/modules" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install /usr/bin/install -c -o root -g wheel libcli.la libprotocol-cli.la libprotocol-simple.la libprotocol-http.la libprotocol-native.la libprotocol-esound.la librtp.la libavahi-wrap.la module-console-kit.la module-cli.la module-cli-protocol-tcp.la module-simple-protocol-tcp.la module-null-sink.la module-sine-source.la module-detect.la module-volume-restore.la module-device-restore.la module-stream-restore.la module-card-restore.la module-default-device-restore.la module-always-sink.la module-rescue-streams.la module-intended-roles.la module-suspend-on-idle.la module-http-protocol-tcp.la module-sine.la module-native-protocol-tcp.la module-native-protocol-fd.la module-esound-protocol-tcp.la module-combine.la module-remap-sink.la module-ladspa-sink.la module-esound-sink.la module-tunnel-sink.la module-tunnel-source.la module-position-event-sounds.la module-augment-properties.la module-cork-music-on-phone.la module-loopback.la module-rtp-send.la module-rtp-recv.la module-cli-protocol-unix.la module-simple-protocol-unix.la module-http-protocol-unix.la module-native-protocol-unix.la module-esound-protocol-unix.la module-pipe-sink.la module-pipe-source.la module-esound-compat-spawnfd.la module-esound-compat-spawnpid.la module-match.la module-x11-bell.la module-x11-publish.la module-x11-xsmp.la module-x11-cork-request.la liboss-util.la module-oss.la module-zeroconf-publish.la module-zeroconf-discover.la module-gconf.la module-hal-detect.la module-rygel-media-server.la libraop.la module-raop-sink.la module-raop-discover.la '/usr/local/lib/pulse-0.9.17/modules' gnome-libtool: install: warning: relinking `libcli.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libcli.la -rpath /usr/local/lib/pulse-0.9.17/modules cli .lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la! libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libcli.soT /usr/local/lib/pulse-0.9.17/modules/libcli.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libcli.lai /usr/local/lib/pulse-0.9.17/modules/libcli.la gnome-libtool: install: warning: relinking `libprotocol-cli.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-cli.la -rpath /usr/local/lib/pulse-0.9.17/mo dules protocol-cli.lo -pthread libpulsecore-0.9.17.la libpul! secommon-0.9.17.la libpulse.la libcli.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-cli.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-cli.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.la gnome-libtool: install: warning: relinking `libprotocol-simple.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-simple.la -rpath /usr/local/lib/pulse-0.9.17 /modules protocol-simple.lo -pthread libpulsecore-0.9.17.la ! libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-simple.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-simple.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.la gnome-libtool: install: warning: relinking `libprotocol-http.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-http.la -rpath /usr/local/lib/pulse-0.9.17/m odules protocol-http.lo mime-type.lo -pthread libpulsecore-0! .9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-http.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-http.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.la gnome-libtool: install: warning: relinking `libprotocol-native.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-native.la -rpath /usr/local/lib/pulse-0.9.17 /modules protocol-native.lo -pthread libpulsecore-0.9.17.la ! libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-native.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-native.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.la gnome-libtool: install: warning: relinking `libprotocol-esound.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libprotocol-esound.la -rpath /usr/local/lib/pulse-0.9.17 /modules protocol-esound.lo -pthread libpulsecore-0.9.17.la ! libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-esound.soT /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-esound.lai /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.la gnome-libtool: install: warning: relinking `librtp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o librtp.la -rpath /usr/local/lib/pulse-0.9.17/modules rtp .lo sdp.lo sap.lo rtsp_client.lo headerlist.lo -pthread libp! ulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/librtp.soT /usr/local/lib/pulse-0.9.17/modules/librtp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/librtp.lai /usr/local/lib/pulse-0.9.17/modules/librtp.la gnome-libtool: install: warning: relinking `libavahi-wrap.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libavah i-wrap.la -rpath /usr/local/lib/pulse-0.9.17/modules libavah! i_wrap_la-avahi-wrap.lo -pthread -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libavahi-wrap.soT /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libavahi-wrap.lai /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.la gnome-libtool: install: warning: relinking `module-console-kit.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-console-kit.la -r! path /usr/local/lib/pulse-0.9.17/modules module_console_kit_la-module-console-kit.lo -pthread -L/usr/local/lib -ldbus-1 libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-console-kit.soT /usr/local/lib/pulse-0.9.17/modules/module-console-kit.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-console-kit.lai /usr/local/lib/pulse-0.9.17/modules/module-console-kit.la gnome-libtool: install: warning: relinking `module-cli.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-cli.la -rpath /usr/local/ lib/pulse-0.9.17/modules module-cli.lo -pthread libpulsecore! -0.9.17.la libcli.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli.soT /usr/local/lib/pulse-0.9.17/modules/module-cli.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli.lai /usr/local/lib/pulse-0.9.17/modules/module-cli.la gnome-libtool: install: warning: relinking `module-cli-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_CLI -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_P ATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/li b -o module-cli-protocol-tcp.la -rpath /usr/local/lib/pulse-! 0.9.17/modules module_cli_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-cli.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.la gnome-libtool: install: warning: relinking `module-simple-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_SIMPLE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIM E_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local /lib -o module-simple-protocol-tcp.la -rpath /usr/local/lib/! pulse-0.9.17/modules module_simple_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-simple.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.la gnome-libtool: install: warning: relinking `module-null-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-null-sink.la -rpath /usr/ local/lib/pulse-0.9.17/modules module-null-sink.lo -pthread ! libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-null-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-null-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-null-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-null-sink.la gnome-libtool: install: warning: relinking `module-sine-source.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -avoid-version -L/usr/local/lib -o module-sine-source.la -rpath /usr/local/lib/puls e-0.9.17/modules module-sine-source.lo -pthread libpulsecore! -0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine-source.soT /usr/local/lib/pulse-0.9.17/modules/module-sine-source.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine-source.lai /usr/local/lib/pulse-0.9.17/modules/module-sine-source.la gnome-libtool: install: warning: relinking `module-detect.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-detect.la -rpath /usr/loc al/lib/pulse-0.9.17/modules module_detect_la-module-detect.l! o -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-detect.soT /usr/local/lib/pulse-0.9.17/modules/module-detect.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-detect.lai /usr/local/lib/pulse-0.9.17/modules/module-detect.la gnome-libtool: install: warning: relinking `module-volume-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-volume-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_volume_restore_la! -module-volume-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-volume-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-volume-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.la gnome-libtool: install: warning: relinking `module-device-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-device-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_device_restore_la! -module-device-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-device-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-device-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-device-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-device-restore.la gnome-libtool: install: warning: relinking `module-stream-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-stream-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_stream_restore_la! -module-stream-restore.lo -pthread libprotocol-native.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-stream-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-stream-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.la gnome-libtool: install: warning: relinking `module-card-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-card-restore.la -rpath /u sr/local/lib/pulse-0.9.17/modules module_card_restore_la-mod! ule-card-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-card-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-card-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-card-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-card-restore.la gnome-libtool: install: warning: relinking `module-default-device-restore.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-default-device-restore.la -rpath /usr/local/lib/pulse-0.9.17/modules module_default_d! evice_restore_la-module-default-device-restore.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-default-device-restore.soT /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-default-device-restore.lai /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.la gnome-libtool: install: warning: relinking `module-always-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-always-sink.la -rpath /us r/local/lib/pulse-0.9.17/modules module_always_sink_la-modul! e-always-sink.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-always-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-always-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-always-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-always-sink.la gnome-libtool: install: warning: relinking `module-rescue-streams.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rescue-streams.la -rpath /usr/local/lib/pulse-0.9.17/modules module_rescue_streams_la! -module-rescue-streams.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rescue-streams.soT /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rescue-streams.lai /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.la gnome-libtool: install: warning: relinking `module-intended-roles.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-intended-roles.la -rpath /usr/local/lib/pulse-0.9.17/modules module_intended_roles_la! -module-intended-roles.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-intended-roles.soT /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-intended-roles.lai /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.la gnome-libtool: install: warning: relinking `module-suspend-on-idle.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-suspend-on-idle.la -rpath /usr/local/lib/pulse-0.9.17/modules module_suspend_on_idle_! la-module-suspend-on-idle.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-suspend-on-idle.soT /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-suspend-on-idle.lai /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.la gnome-libtool: install: warning: relinking `module-http-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_HTTP -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_ PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/l ib -o module-http-protocol-tcp.la -rpath /usr/local/lib/puls! e-0.9.17/modules module_http_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-http.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.la gnome-libtool: install: warning: relinking `module-sine.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-sine.la -rpath /usr/local /lib/pulse-0.9.17/modules module-sine.lo -pthread libpulseco! re-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine.soT /usr/local/lib/pulse-0.9.17/modules/module-sine.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine.lai /usr/local/lib/pulse-0.9.17/modules/module-sine.la gnome-libtool: install: warning: relinking `module-native-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_NATIVE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIM E_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local /lib -o module-native-protocol-tcp.la -rpath /usr/local/lib/! pulse-0.9.17/modules module_native_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-native.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.la gnome-libtool: install: warning: relinking `module-native-protocol-fd.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-native-protocol-fd.la -rp ath /usr/local/lib/pulse-0.9.17/modules module_native_protoc! ol_fd_la-module-native-protocol-fd.lo -pthread libpulsecore-0.9.17.la libprotocol-native.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-fd.soT /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-fd.lai /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.la gnome-libtool: install: warning: relinking `module-esound-protocol-tcp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_TCP_SOCKETS -DUSE_PROTOCOL_ESOUND -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIM E_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local /lib -o module-esound-protocol-tcp.la -rpath /usr/local/lib/! pulse-0.9.17/modules module_esound_protocol_tcp_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-esound.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-tcp.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-tcp.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.la gnome-libtool: install: warning: relinking `module-combine.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-combine.la -rpath /usr/lo cal/lib/pulse-0.9.17/modules module-combine.lo -pthread libp! ulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-combine.soT /usr/local/lib/pulse-0.9.17/modules/module-combine.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-combine.lai /usr/local/lib/pulse-0.9.17/modules/module-combine.la gnome-libtool: install: warning: relinking `module-remap-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-remap-sink.la -rpath /usr /local/lib/pulse-0.9.17/modules module-remap-sink.lo -pthrea! d libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-remap-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-remap-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.la gnome-libtool: install: warning: relinking `module-ladspa-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DLADSPA_PATH=\"/usr/local/lib/ladspa:/usr/local/lib/ladspa:/usr/lib/ladspa:/usr/local/lib64/ladspa:/usr/lib64/ladspa\" -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/us r/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-comm on -fdiagnostics-show-option -module -disable-static -avoid-! version -L/usr/local/lib -o module-ladspa-sink.la -rpath /usr/local/lib/pulse-0.9.17/modules module_ladspa_sink_la-module-ladspa-sink.lo -pthread -lltdl libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-ladspa-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-ladspa-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.la gnome-libtool: install: warning: relinking `module-esound-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-esound-sink.la -rpath /us r/local/lib/pulse-0.9.17/modules module-esound-sink.lo -pthr! ead libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.la gnome-libtool: install: warning: relinking `module-tunnel-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DTUNNEL_SINK=1 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\ " -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-tunnel-si nk.la -rpath /usr/local/lib/pulse-0.9.17/modules module_tunn! el_sink_la-module-tunnel.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.la gnome-libtool: install: warning: relinking `module-tunnel-source.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-tunnel-source.la -rpath / usr/local/lib/pulse-0.9.17/modules module-tunnel.lo -pthread! libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-source.soT /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-source.lai /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.la gnome-libtool: install: warning: relinking `module-position-event-sounds.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-position-event-sounds.la -rpath /usr/local/lib/pulse-0.9.17/modules module_position_e! vent_sounds_la-module-position-event-sounds.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-position-event-sounds.soT /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-position-event-sounds.lai /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.la gnome-libtool: install: warning: relinking `module-augment-properties.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -DDESKTOPFILEDIR=\"/usr/share/applications\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/ local/lib -o module-augment-properties.la -rpath /usr/local/! lib/pulse-0.9.17/modules module_augment_properties_la-module-augment-properties.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-augment-properties.soT /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-augment-properties.lai /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.la gnome-libtool: install: warning: relinking `module-cork-music-on-phone.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-cork-music-on-phone.la -r path /usr/local/lib/pulse-0.9.17/modules module_cork_music_o! n_phone_la-module-cork-music-on-phone.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cork-music-on-phone.soT /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cork-music-on-phone.lai /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.la gnome-libtool: install: warning: relinking `module-loopback.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-loopback.la -rpath /usr/l ocal/lib/pulse-0.9.17/modules module-loopback.lo -pthread li! bpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-loopback.soT /usr/local/lib/pulse-0.9.17/modules/module-loopback.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-loopback.lai /usr/local/lib/pulse-0.9.17/modules/module-loopback.la gnome-libtool: install: warning: relinking `module-rtp-send.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rtp-send.la -rpath /usr/l ocal/lib/pulse-0.9.17/modules module_rtp_send_la-module-rtp-! send.lo -pthread libpulsecore-0.9.17.la librtp.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-send.soT /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-send.lai /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.la gnome-libtool: install: warning: relinking `module-rtp-recv.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rtp-recv.la -rpath /usr/l ocal/lib/pulse-0.9.17/modules module_rtp_recv_la-module-rtp-! recv.lo -pthread libpulsecore-0.9.17.la librtp.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-recv.soT /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-recv.lai /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.la gnome-libtool: install: warning: relinking `module-cli-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_CLI -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_ PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/l ib -o module-cli-protocol-unix.la -rpath /usr/local/lib/puls! e-0.9.17/modules module_cli_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-cli.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.la gnome-libtool: install: warning: relinking `module-simple-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_SIMPLE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTI ME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/loca l/lib -o module-simple-protocol-unix.la -rpath /usr/local/li! b/pulse-0.9.17/modules module_simple_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-simple.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.la gnome-libtool: install: warning: relinking `module-http-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_HTTP -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME _PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/ lib -o module-http-protocol-unix.la -rpath /usr/local/lib/pu! lse-0.9.17/modules module_http_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-http.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.la gnome-libtool: install: warning: relinking `module-native-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_NATIVE -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTI ME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/loca l/lib -o module-native-protocol-unix.la -rpath /usr/local/li! b/pulse-0.9.17/modules module_native_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-native.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.la gnome-libtool: install: warning: relinking `module-esound-protocol-unix.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -DUSE_UNIX_SOCKETS -DUSE_PROTOCOL_ESOUND -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTI ME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/loca l/lib -o module-esound-protocol-unix.la -rpath /usr/local/li! b/pulse-0.9.17/modules module_esound_protocol_unix_la-module-protocol-stub.lo -pthread libpulsecore-0.9.17.la libprotocol-esound.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-unix.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-unix.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.la gnome-libtool: install: warning: relinking `module-pipe-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-pipe-sink.la -rpath /usr/ local/lib/pulse-0.9.17/modules module-pipe-sink.lo -pthread ! libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.la gnome-libtool: install: warning: relinking `module-pipe-source.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-pipe-source.la -rpath /us r/local/lib/pulse-0.9.17/modules module-pipe-source.lo -pthr! ead libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-source.soT /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-source.lai /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.la gnome-libtool: install: warning: relinking `module-esound-compat-spawnfd.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-esound-compat-spawnfd.la -rpath /usr/local/lib/pulse-0.9.17/modules module-esound-com! pat-spawnfd.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnfd.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnfd.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.la gnome-libtool: install: warning: relinking `module-esound-compat-spawnpid.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-esound-compat-spawnpid.la -rpath /usr/local/lib/pulse-0.9.17/modules module-esound-co! mpat-spawnpid.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnpid.soT /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnpid.lai /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.la gnome-libtool: install: warning: relinking `module-match.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-match.la -rpath /usr/loca l/lib/pulse-0.9.17/modules module-match.lo -pthread libpulse! core-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-match.soT /usr/local/lib/pulse-0.9.17/modules/module-match.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-match.lai /usr/local/lib/pulse-0.9.17/modules/module-match.la gnome-libtool: install: warning: relinking `module-x11-bell.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-bell.la -rpath /usr/local/lib/pulse-0.9.17/mo! dules module_x11_bell_la-module-x11-bell.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-bell.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-bell.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.la gnome-libtool: install: warning: relinking `module-x11-publish.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-publish.la -rpath /usr/local/lib/pulse-0.9.17! /modules module_x11_publish_la-module-x11-publish.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libprotocol-native.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-publish.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-publish.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.la gnome-libtool: install: warning: relinking `module-x11-xsmp.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-xsmp.la -rpath /usr/local/lib/pulse-0.9.17/mo! dules module_x11_xsmp_la-module-x11-xsmp.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-xsmp.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-xsmp.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.la gnome-libtool: install: warning: relinking `module-x11-cork-request.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-x11-cork-request.la -rpath /usr/local/lib/pulse-0! .9.17/modules module_x11_cork_request_la-module-x11-cork-request.lo -pthread -L/usr/local/lib -lX11 -lSM -lICE -lXtst libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-cork-request.soT /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-cork-request.lai /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.la gnome-libtool: install: warning: relinking `liboss-util.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o liboss-util.la -rpath /usr/local/lib/pulse-0.9.17/module s oss-util.lo libpulsecore-0.9.17.la libpulsecommon-0.9.17.l! a libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/liboss-util.soT /usr/local/lib/pulse-0.9.17/modules/liboss-util.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/liboss-util.lai /usr/local/lib/pulse-0.9.17/modules/liboss-util.la gnome-libtool: install: warning: relinking `module-oss.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-oss.la -rpath /usr/local/ lib/pulse-0.9.17/modules module-oss.lo -pthread liboss-util.! la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-oss.soT /usr/local/lib/pulse-0.9.17/modules/module-oss.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-oss.lai /usr/local/lib/pulse-0.9.17/modules/module-oss.la gnome-libtool: install: warning: relinking `module-zeroconf-publish.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/ usr/local/lib -o module-zeroconf-publish.la -rpath /usr/loca! l/lib/pulse-0.9.17/modules module_zeroconf_publish_la-module-zeroconf-publish.lo -pthread -pthread -L/usr/local/lib -lavahi-common -lavahi-client libavahi-wrap.la libprotocol-native.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-publish.soT /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-publish.lai /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.la gnome-libtool: install: warning: relinking `module-zeroconf-discover.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/ usr/local/lib -o module-zeroconf-discover.la -rpath /usr/loc! al/lib/pulse-0.9.17/modules module_zeroconf_discover_la-module-zeroconf-discover.lo -pthread -pthread -L/usr/local/lib -lavahi-common -lavahi-client libavahi-wrap.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-discover.soT /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-discover.lai /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.la gnome-libtool: install: warning: relinking `module-gconf.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -DPA_GCONF_HELPER=\"/usr/local/libexec/pulse/gconf-helper\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid- version -L/usr/local/lib -o module-gconf.la -rpath /usr/loca! l/lib/pulse-0.9.17/modules module_gconf_la-module-gconf.lo -pthread libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-gconf.soT /usr/local/lib/pulse-0.9.17/modules/module-gconf.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-gconf.lai /usr/local/lib/pulse-0.9.17/modules/module-gconf.la gnome-libtool: install: warning: relinking `module-hal-detect.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/local/include/hal -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-co mmon -fdiagnostics-show-option -module -disable-static -avoi! d-version -L/usr/local/lib -o module-hal-detect.la -rpath /usr/local/lib/pulse-0.9.17/modules module_hal_detect_la-module-hal-detect.lo -pthread -L/usr/local/lib -lhal -ldbus-1 libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-hal-detect.soT /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-hal-detect.lai /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.la gnome-libtool: install: warning: relinking `module-rygel-media-server.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-rygel-media-serve! r.la -rpath /usr/local/lib/pulse-0.9.17/modules module_rygel_media_server_la-module-rygel-media-server.lo -pthread -L/usr/local/lib -ldbus-1 libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la libprotocol-http.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rygel-media-server.soT /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rygel-media-server.lai /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.la gnome-libtool: install: warning: relinking `libraop.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -I/usr/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -avoid-version -L/usr/local/lib -o libraop.la -rpath /usr/local/lib/pulse-0. 9.17/modules libraop_la-raop_client.lo libraop_la-base64.lo ! -pthread -lcrypto -lssl libpulsecore-0.9.17.la librtp.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libraop.soT /usr/local/lib/pulse-0.9.17/modules/libraop.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libraop.lai /usr/local/lib/pulse-0.9.17/modules/libraop.la gnome-libtool: install: warning: relinking `module-raop-sink.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/usr/local/lib -o module-raop-sink.la -rpath /usr/ local/lib/pulse-0.9.17/modules module-raop-sink.lo -pthread ! libpulsecore-0.9.17.la librtp.la libraop.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-sink.soT /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-sink.lai /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.la gnome-libtool: install: warning: relinking `module-raop-discover.la' gnome-libtool: install: (cd /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src; /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --silent --tag CC --mode=relink cc -std=gnu99 -I../src -I../src -I../src/modules -I../src/modules -I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth -I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss -I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop -I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11 -I../src/modules/jack -I../src/modules/jack -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS -I/usr/local/include -I/usr/local/include -I/usr/local/include -DPA_BUILDDIR=\"/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src\" -DPA_DLSEARCHPATH=\"/usr/local/lib/pulse-0.9.17/modules\" -DPA_DEFAULT_CONFIG_DIR=\"/usr/local/etc/pulse\" -DPA_BINARY=\"/usr/local/bin/pulseaudio\" -DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\" -DPA_SYSTEM_CO NFIG_PATH=\"/var/lib/pulse\" -DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS -DPULSE_LOCALEDIR=\"/usr/local/share/locale\" -DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\" -DPA_ALSA_PATHS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/paths\" -DPA_ALSA_PROFILE_SETS_DIR=\"/usr/local/share/pulseaudio/alsa-mixer/profile-sets\" -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -module -disable-static -avoid-version -L/ usr/local/lib -o module-raop-discover.la -rpath /usr/local/l! ib/pulse-0.9.17/modules module_raop_discover_la-module-raop-discover.lo -pthread -pthread -L/usr/local/lib -lavahi-common -lavahi-client libavahi-wrap.la libpulsecore-0.9.17.la libpulsecommon-0.9.17.la libpulse.la -lgdbm -lexecinfo -lrt -lm -lintl ) gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-discover.soT /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.so gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-discover.lai /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.la gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libcli.a /usr/local/lib/pulse-0.9.17/modules/libcli.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libcli.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libcli.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-cli.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-cli.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-simple.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-simple.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-http.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-http.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-native.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-native.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libprotocol-esound.a /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libprotocol-esound.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/librtp.a /usr/local/lib/pulse-0.9.17/modules/librtp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/librtp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/librtp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libavahi-wrap.a /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libavahi-wrap.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-console-kit.a /usr/local/lib/pulse-0.9.17/modules/module-console-kit.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-console-kit.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-console-kit.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli.a /usr/local/lib/pulse-0.9.17/modules/module-cli.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cli.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cli.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-null-sink.a /usr/local/lib/pulse-0.9.17/modules/module-null-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-null-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-null-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine-source.a /usr/local/lib/pulse-0.9.17/modules/module-sine-source.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-sine-source.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-sine-source.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-detect.a /usr/local/lib/pulse-0.9.17/modules/module-detect.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-detect.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-detect.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-volume-restore.a /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-volume-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-device-restore.a /usr/local/lib/pulse-0.9.17/modules/module-device-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-device-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-device-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-stream-restore.a /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-stream-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-card-restore.a /usr/local/lib/pulse-0.9.17/modules/module-card-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-card-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-card-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-default-device-restore.a /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-default-device-restore.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-always-sink.a /usr/local/lib/pulse-0.9.17/modules/module-always-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-always-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-always-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rescue-streams.a /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rescue-streams.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-intended-roles.a /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-intended-roles.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-suspend-on-idle.a /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-suspend-on-idle.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-sine.a /usr/local/lib/pulse-0.9.17/modules/module-sine.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-sine.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-sine.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-fd.a /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-fd.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-tcp.a /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-tcp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-combine.a /usr/local/lib/pulse-0.9.17/modules/module-combine.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-combine.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-combine.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-remap-sink.a /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-remap-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-ladspa-sink.a /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-ladspa-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-sink.a /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-sink.a /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-tunnel-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-tunnel-source.a /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-tunnel-source.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-position-event-sounds.a /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-position-event-sounds.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-augment-properties.a /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-augment-properties.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cork-music-on-phone.a /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cork-music-on-phone.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-loopback.a /usr/local/lib/pulse-0.9.17/modules/module-loopback.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-loopback.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-loopback.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-send.a /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rtp-send.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rtp-recv.a /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rtp-recv.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-cli-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-cli-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-simple-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-simple-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-http-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-http-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-native-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-native-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-protocol-unix.a /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-protocol-unix.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-sink.a /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-pipe-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-pipe-source.a /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-pipe-source.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnfd.a /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnfd.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-esound-compat-spawnpid.a /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-esound-compat-spawnpid.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-match.a /usr/local/lib/pulse-0.9.17/modules/module-match.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-match.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-match.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-bell.a /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-bell.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-publish.a /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-publish.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-xsmp.a /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-xsmp.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-x11-cork-request.a /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-x11-cork-request.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/liboss-util.a /usr/local/lib/pulse-0.9.17/modules/liboss-util.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/liboss-util.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/liboss-util.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-oss.a /usr/local/lib/pulse-0.9.17/modules/module-oss.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-oss.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-oss.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-publish.a /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-publish.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-zeroconf-discover.a /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-zeroconf-discover.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-gconf.a /usr/local/lib/pulse-0.9.17/modules/module-gconf.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-gconf.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-gconf.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-hal-detect.a /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-hal-detect.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-rygel-media-server.a /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-rygel-media-server.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/libraop.a /usr/local/lib/pulse-0.9.17/modules/libraop.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/libraop.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/libraop.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-sink.a /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-raop-sink.a gnome-libtool: install: /usr/bin/install -c -o root -g wheel .libs/module-raop-discover.a /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.a gnome-libtool: install: chmod 644 /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.a gnome-libtool: install: ranlib /usr/local/lib/pulse-0.9.17/modules/module-raop-discover.a - ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib/pulse-0.9.17/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. - ---------------------------------------------------------------------- test -z "/usr/local/libexec/pulse" || .././install-sh -c -d "/usr/local/libexec/pulse" /bin/sh /work/a/ports/audio/pulseaudio/work/gnome-libtool --mode=install install -s -o root -g wheel -m 555 gconf-helper '/usr/local/libexec/pulse' gnome-libtool: install: install -o root -g wheel -m 555 -s .libs/gconf-helper /usr/local/libexec/pulse/gconf-helper gmake install-exec-hook gmake[5]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' chown root /usr/local/libexec/pulse/proximity-helper chown: /usr/local/libexec/pulse/proximity-helper: No such file or directory gmake[5]: [install-exec-hook] Error 1 (ignored) chmod u+s /usr/local/libexec/pulse/proximity-helper chmod: /usr/local/libexec/pulse/proximity-helper: No such file or directory gmake[5]: [install-exec-hook] Error 1 (ignored) ln -sf pacat /usr/local/bin/parec ln -sf pacat /usr/local/bin/pamon ln -sf pacat /usr/local/bin/paplay ln -sf pacat /usr/local/bin/parecord rm -f /usr/local/lib/libpulsedsp.la rm -f /usr/local/lib/pulse-0.9.17/modules/*.la gmake[5]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' test -z "/usr/local/share/pulseaudio/alsa-mixer/paths" || .././install-sh -c -d "/usr/local/share/pulseaudio/alsa-mixer/paths" test -z "/usr/local/share/pulseaudio/alsa-mixer/profile-sets" || .././install-sh -c -d "/usr/local/share/pulseaudio/alsa-mixer/profile-sets" test -z "/usr/local/etc/dbus-1/system.d" || .././install-sh -c -d "/usr/local/etc/dbus-1/system.d" install -o root -g wheel -m 444 daemon/pulseaudio-system.conf '/usr/local/etc/dbus-1/system.d' test -z "/usr/local/etc/pulse" || .././install-sh -c -d "/usr/local/etc/pulse" install -o root -g wheel -m 444 default.pa system.pa daemon.conf client.conf '/usr/local/etc/pulse' test -z "/usr/local/include/pulse" || .././install-sh -c -d "/usr/local/include/pulse" install -o root -g wheel -m 444 pulse/cdecl.h pulse/channelmap.h pulse/context.h pulse/def.h pulse/error.h pulse/ext-stream-restore.h pulse/gccmacro.h pulse/introspect.h pulse/mainloop-api.h pulse/mainloop-signal.h pulse/mainloop.h pulse/operation.h pulse/proplist.h pulse/pulseaudio.h pulse/rtclock.h pulse/sample.h pulse/scache.h pulse/simple.h pulse/stream.h pulse/subscribe.h pulse/thread-mainloop.h pulse/timeval.h pulse/utf8.h pulse/util.h pulse/version.h pulse/volume.h pulse/xmalloc.h pulse/browser.h pulse/glib-mainloop.h '/usr/local/include/pulse' test -z "/lib/udev/rules.d" || .././install-sh -c -d "/lib/udev/rules.d" test -z "/usr/local/etc/xdg/autostart" || .././install-sh -c -d "/usr/local/etc/xdg/autostart" install -o root -g wheel -m 444 daemon/pulseaudio.desktop '/usr/local/etc/xdg/autostart' gmake[4]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src' Making install in doxygen gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' gmake[3]: Nothing to be done for `install-exec-am'. gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/doxygen' Making install in man gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' gmake[3]: Nothing to be done for `install-exec-am'. test -z "/usr/local/man/man1" || .././install-sh -c -d "/usr/local/man/man1" install -o root -g wheel -m 444 pulseaudio.1 esdcompat.1 pax11publish.1 paplay.1 pacat.1 pacmd.1 pactl.1 pasuspender.1 padsp.1 pabrowse.1 '/usr/local/man/man1' test -z "/usr/local/man/man5" || .././install-sh -c -d "/usr/local/man/man5" install -o root -g wheel -m 444 pulse-daemon.conf.5 pulse-client.conf.5 default.pa.5 '/usr/local/man/man5' gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/man' Making install in po gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/po' linguas="as bn_IN ca cs de de_CH el es fi fr gu hi it ja kn ml mr nl or pa pl pt pt_BR sr sr@latin sv ta te uk zh_CN "; \ for lang in $linguas; do \ dir=/usr/local/share/locale/$lang/LC_MESSAGES; \ /bin/sh /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/install-sh -d $dir; \ if test -r $lang.gmo; then \ install -o root -g wheel -m 444 $lang.gmo $dir/pulseaudio.mo; \ echo "installing $lang.gmo as $dir/pulseaudio.mo"; \ else \ install -o root -g wheel -m 444 ./$lang.gmo $dir/pulseaudio.mo; \ echo "installing ./$lang.gmo as" \ "$dir/pulseaudio.mo"; \ fi; \ if test -r $lang.gmo.m; then \ install -o root -g wheel -m 444 $lang.gmo.m $dir/pulseaudio.mo.m; \ echo "installing $lang.gmo.m as $dir/pulseaudio.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ install -o root -g wheel -m 444 ./$lang.gmo.m \ $dir/pulseaudio.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/pulseaudio.mo.m"; \ else \ true; \ fi; \ fi; \ done installing as.gmo as /usr/local/share/locale/as/LC_MESSAGES/pulseaudio.mo installing bn_IN.gmo as /usr/local/share/locale/bn_IN/LC_MESSAGES/pulseaudio.mo installing ca.gmo as /usr/local/share/locale/ca/LC_MESSAGES/pulseaudio.mo installing cs.gmo as /usr/local/share/locale/cs/LC_MESSAGES/pulseaudio.mo installing de.gmo as /usr/local/share/locale/de/LC_MESSAGES/pulseaudio.mo installing de_CH.gmo as /usr/local/share/locale/de_CH/LC_MESSAGES/pulseaudio.mo installing el.gmo as /usr/local/share/locale/el/LC_MESSAGES/pulseaudio.mo installing es.gmo as /usr/local/share/locale/es/LC_MESSAGES/pulseaudio.mo installing fi.gmo as /usr/local/share/locale/fi/LC_MESSAGES/pulseaudio.mo installing fr.gmo as /usr/local/share/locale/fr/LC_MESSAGES/pulseaudio.mo installing gu.gmo as /usr/local/share/locale/gu/LC_MESSAGES/pulseaudio.mo installing hi.gmo as /usr/local/share/locale/hi/LC_MESSAGES/pulseaudio.mo installing it.gmo as /usr/local/share/locale/it/LC_MESSAGES/pulseaudio.mo installing ja.gmo as /usr/local/share/locale/ja/LC_MESSAGES/pulseaudio.mo installing kn.gmo as /usr/local/share/locale/kn/LC_MESSAGES/pulseaudio.mo installing ml.gmo as /usr/local/share/locale/ml/LC_MESSAGES/pulseaudio.mo installing mr.gmo as /usr/local/share/locale/mr/LC_MESSAGES/pulseaudio.mo installing nl.gmo as /usr/local/share/locale/nl/LC_MESSAGES/pulseaudio.mo installing or.gmo as /usr/local/share/locale/or/LC_MESSAGES/pulseaudio.mo installing pa.gmo as /usr/local/share/locale/pa/LC_MESSAGES/pulseaudio.mo installing pl.gmo as /usr/local/share/locale/pl/LC_MESSAGES/pulseaudio.mo installing pt.gmo as /usr/local/share/locale/pt/LC_MESSAGES/pulseaudio.mo installing pt_BR.gmo as /usr/local/share/locale/pt_BR/LC_MESSAGES/pulseaudio.mo installing sr.gmo as /usr/local/share/locale/sr/LC_MESSAGES/pulseaudio.mo installing sr@latin.gmo as /usr/local/share/locale/sr@latin/LC_MESSAGES/pulseaudio.mo installing sv.gmo as /usr/local/share/locale/sv/LC_MESSAGES/pulseaudio.mo installing ta.gmo as /usr/local/share/locale/ta/LC_MESSAGES/pulseaudio.mo installing te.gmo as /usr/local/share/locale/te/LC_MESSAGES/pulseaudio.mo installing uk.gmo as /usr/local/share/locale/uk/LC_MESSAGES/pulseaudio.mo installing zh_CN.gmo as /usr/local/share/locale/zh_CN/LC_MESSAGES/pulseaudio.mo gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/po' gmake[2]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[3]: Entering directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[3]: Nothing to be done for `install-exec-am'. test -z "/usr/local/libdata/pkgconfig" || ./install-sh -c -d "/usr/local/libdata/pkgconfig" install -o root -g wheel -m 444 libpulse.pc libpulse-simple.pc libpulse-browse.pc libpulse-mainloop-glib.pc '/usr/local/libdata/pkgconfig' gmake[3]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[2]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' gmake[1]: Leaving directory `/work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17' ===> Creating users and/or groups. Creating group `pulse' with gid `563'. Creating group `pulse-access' with gid `564'. Creating group `pulse-rt' with gid `557'. Creating user `pulse' with uid `563'. install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/default.pa /usr/local/etc/pulse/default.pa-dist install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/daemon.conf /usr/local/etc/pulse/daemon.conf-dist install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/client.conf /usr/local/etc/pulse/client.conf-dist install -o root -g wheel -m 444 /work/a/ports/audio/pulseaudio/work/pulseaudio-0.9.17/src/system.pa /usr/local/etc/pulse/system.pa-dist ===> Compressing manual pages for pulseaudio-0.9.17 ===> Running ldconfig /sbin/ldconfig -m /usr/local/lib ===> Registering installation for pulseaudio-0.9.17 ===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/lib/libpulsecommon-0.9.17.so If there are vulnerabilities in these programs there may be a security risk to the system. FreeBSD makes no guarantee about the security of ports included in the Ports Collection. Please type 'make deinstall' to deinstall the port if this is a concern. For more information, and contact details about the security status of this software, see the following webpage: http://pulseaudio.org/ ================================================================ ======================================== ===> Building package for pulseaudio-0.9.17 Creating package /tmp/packages/All/pulseaudio-0.9.17.tbz Registering depends: gconf2-2.26.2_1 gtk-2.16.6 atk-1.26.0 libsamplerate-0.1.7_1 libsndfile-1.0.20_1 flac-1.2.1_1 libvorbis-1.2.3,3 speex-1.2.r1_2,1 libogg-1.1.4,4 ORBit2-2.14.17 libIDL-0.8.13 avahi-app-0.6.25_2 hal-0.5.11_26 consolekit-0.3.0_8 policykit-0.9_5 dbus-glib-0.82 pango-1.24.5 shared-mime-info-0.60_1 gio-fam-backend-2.20.5 gamin-0.1.10_3 glib-2.20.5 gettext-0.17_1 dbus-1.2.4.6_1 libxml2-2.7.3_1 libiconv-1.13.1 gdbm-1.8.3_3 libdaemon-0.12 libexecinfo-1.1_3 libltdl-2.2.6a cairo-1.8.8,1 libXcursor-1.1.9_1 libXft-2.1.13 libXrandr-1.3.0 libXrender-0.9.4_1 libXdamage-1.1.1 libXcomposite-0.4.0,1 libXfixes-4.0.3_1 libXi-1.2.1,1 libXinerama-1.0.3,1 libXtst-1.0.3_1 libXext-1.0.5,1 libX11-1.2.1_1,1 xcb-util-0.3.6 libxcb-1.4 libpthread-stubs-0.1 libvolume_id-0.81.1 pcre-7.9 libXdmcp-1.0.2_1 libXau-1.0.4 xorg-fonts-truetype-7.4 font-bh-ttf-1.0.0 font-misc-ethiopic-1.0.0 font-misc-meltho-1.0.0_1 mkfontdir-1.0.4 mkfontscale-1.0.6 libfontenc-1.0.4 libSM-1.1.0_1,1 libICE-1.0.4_1,1 xproto-7.0.15 bitstream-vera-1.10_4 fontconfig-2.6.0,1 freetype2-2.3.9_1 pixman-0.15.4 fftw3-3.2.2_1 pkg-config-0.23_1 jasper-1.900.1_8 tiff-3.8.2_4 jpeg-7 png-1.2.38 perl-5.8.9_3 xcb-proto-1.5 python26-2.6.2_3 gnomehier-2.3_12 hicolor-icon-theme-0.10_2 pciids-20090807 dmidecode-2.10 gnome_subr-1.0 expat-2.0.1 encodings-1.0.2,1 font-util-1.0.1 compositeproto-0.4 damageproto-1.1.0_2 fixesproto-4.0 inputproto-1.5.0 kbproto-1.0.3 randrproto-1.3.0 recordproto-1.13.2 renderproto-0.9.3 xextproto-7.0.5 xineramaproto-1.1.2. Creating bzip'd tar ball in '/tmp/packages/All/pulseaudio-0.9.17.tbz' Deleting pulseaudio-0.9.17 ================================================================ === Checking filesystem state list of extra files and directories in / (not present before this port was installed but present after it was deinstalled) 899333 4 drwxr-xr-x 3 root wheel 512 Sep 15 15:52 lib/udev 899334 4 drwxr-xr-x 2 root wheel 512 Sep 15 15:52 lib/udev/rules.d 827917 4 drwxr-xr-x 3 root wheel 512 Sep 15 15:52 usr/local/share/pulseaudio 827940 4 drwxr-xr-x 4 root wheel 512 Sep 15 15:52 usr/local/share/pulseaudio/alsa-mixer 827942 4 drwxr-xr-x 2 root wheel 512 Sep 15 15:52 usr/local/share/pulseaudio/alsa-mixer/paths 827944 4 drwxr-xr-x 2 root wheel 512 Sep 15 15:52 usr/local/share/pulseaudio/alsa-mixer/profile-sets ================================================================ build of /usr/ports/audio/pulseaudio ended at Tue Sep 15 15:53:09 UTC 2009 - ----- End forwarded message ----- - -- +-----------------------+-------------------------------+ | PGP : 0xB1E6FCE9 | Jabber : miwi(at)BSDCrew.de | | Skype : splash_111 | Mail : miwi(at)FreeBSD.org | +-----------------------+-------------------------------+ | Mess with the Best, Die like the Rest! | +-----------------------+-------------------------------+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkqvu4cACgkQdLJIhLHm/OkkqACfTQlzSv9VL0SuBDUzztg3pCSN nNAAoIiM59mjN6I9v5L1kAyQAYOei2/s =cOTj -----END PGP SIGNATURE----- From marcus at freebsd.org Tue Sep 15 16:09:31 2009 From: marcus at freebsd.org (Joe Marcus Clarke) Date: Tue Sep 15 16:09:38 2009 Subject: [ports-i386@FreeBSD.org: pulseaudio-0.9.17 failed on i386 8] In-Reply-To: <20090915160631.GD69992@bsdcrew.de> References: <20090915160631.GD69992@bsdcrew.de> Message-ID: <4AAFBC3A.4090600@freebsd.org> Martin Wilke wrote: > ----- Forwarded message from User Ports-i386 ----- > > Date: Tue, 15 Sep 2009 15:53:15 GMT > From: User Ports-i386 > To: erwin@FreeBSD.org, miwi@FreeBSD.org, linimon@FreeBSD.org, > flz@FreeBSD.org > Subject: pulseaudio-0.9.17 failed on i386 8 > X-Spam-Status: No, score=-106.5 required=5.0 tests=AWL,BAYES_00, > RCVD_IN_DNSWL_MED,USER_IN_WHITELIST autolearn=ham version=3.2.5 > > Excerpt from the build log at > > http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.8.20090911172956/pulseaudio-0.9.17.log > > building pulseaudio-0.9.17 on gohan48.freebsd.org > in directory /x/tmp/8/20090911172956/chroot/5 > building for: 8.0-BETA4 i386 > maintained by: gnome@FreeBSD.org > port directory: /usr/ports/audio/pulseaudio > Makefile ident: $FreeBSD: ports/audio/pulseaudio/Makefile,v 1.50 2009/09/11 05:55:45 marcus Exp $ Dude, this was fixed in 0.9.17_1. Why is pointyhat still building an old version? Joe -- Joe Marcus Clarke FreeBSD GNOME Team :: gnome@FreeBSD.org FreeNode / #freebsd-gnome http://www.FreeBSD.org/gnome From miwi at FreeBSD.org Tue Sep 15 16:51:29 2009 From: miwi at FreeBSD.org (Martin Wilke) Date: Tue Sep 15 16:51:36 2009 Subject: [ports-i386@FreeBSD.org: pulseaudio-0.9.17 failed on i386 8] In-Reply-To: <4AAFBC3A.4090600@freebsd.org> References: <20090915160631.GD69992@bsdcrew.de> <4AAFBC3A.4090600@freebsd.org> Message-ID: <20090915165124.GE69992@bsdcrew.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, Sep 15, 2009 at 12:09:30PM -0400, Joe Marcus Clarke wrote: > Martin Wilke wrote: > > ----- Forwarded message from User Ports-i386 ----- > > > > Date: Tue, 15 Sep 2009 15:53:15 GMT > > From: User Ports-i386 > > To: erwin@FreeBSD.org, miwi@FreeBSD.org, linimon@FreeBSD.org, > > flz@FreeBSD.org > > Subject: pulseaudio-0.9.17 failed on i386 8 > > X-Spam-Status: No, score=-106.5 required=5.0 tests=AWL,BAYES_00, > > RCVD_IN_DNSWL_MED,USER_IN_WHITELIST autolearn=ham version=3.2.5 > > > > Excerpt from the build log at > > > > http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.8.20090911172956/pulseaudio-0.9.17.log > > > > building pulseaudio-0.9.17 on gohan48.freebsd.org > > in directory /x/tmp/8/20090911172956/chroot/5 > > building for: 8.0-BETA4 i386 > > maintained by: gnome@FreeBSD.org > > port directory: /usr/ports/audio/pulseaudio > > Makefile ident: $FreeBSD: ports/audio/pulseaudio/Makefile,v 1.50 2009/09/11 05:55:45 marcus Exp $ > > Dude, this was fixed in 0.9.17_1. Why is pointyhat still building an > old version? Still a full run, seems I've overlooked the commit. - -Martin > > Joe > > -- > Joe Marcus Clarke > FreeBSD GNOME Team :: gnome@FreeBSD.org > FreeNode / #freebsd-gnome > http://www.FreeBSD.org/gnome > - -- +-----------------------+-------------------------------+ | PGP : 0xB1E6FCE9 | Jabber : miwi(at)BSDCrew.de | | Skype : splash_111 | Mail : miwi(at)FreeBSD.org | +-----------------------+-------------------------------+ | Mess with the Best, Die like the Rest! | +-----------------------+-------------------------------+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkqvxgwACgkQdLJIhLHm/Ont/gCfYnwP2NsuSaaBRXVcuY2IMtXT RfgAoI6fJYY2YCJqHFA0T9L5sWyfLVzd =VOXt -----END PGP SIGNATURE----- From dougb at freebsd.org Tue Sep 15 21:14:39 2009 From: dougb at freebsd.org (Doug Barton) Date: Tue Sep 15 21:14:46 2009 Subject: sysutils/policykit depends on optional component for docbook-xsl Message-ID: <200909152114.n8FLEb11094993@dougb.net> >Submitter-Id: current-users >Originator: Doug Barton >Organization: AAAG >Confidential: no >Synopsis: sysutils/policykit depends on optional component for docbook-xsl >Severity: non-critical >Priority: low >Category: ports >Class: sw-bug >Release: FreeBSD 9.0-CURRENT i386 >Environment: DNA >Description: policykit has a BUILD_DEPENDS on textproc/docbook-xsl but the file listed for the dependency (${LOCALBASE}/share/xsl/docbook/manpages/docbook.xsl) is an optional component of that port, which I do not have installed. This leads to the dreaded "docbook-xsl-1.75.1 is already installed" error. I also have a similar problem with the dependency for docbook-1.4 but I am not 100% sure why. >How-To-Repeat: Install textproc/docbook-xsl without the MANPAGES option checked, then install policykit. >Fix: Fix the dependency for docbook-xsl. It would also be nice if there were some sort of OPTION for policykit so that it did not install so many dependencies. From edwin at FreeBSD.org Tue Sep 15 21:20:24 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Tue Sep 15 21:20:37 2009 Subject: ports/138861: sysutils/policykit depends on optional component for docbook-xsl Message-ID: <200909152120.n8FLKOwN079250@freefall.freebsd.org> Synopsis: sysutils/policykit depends on optional component for docbook-xsl Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Tue Sep 15 21:20:23 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=138861 From dougb at FreeBSD.org Tue Sep 15 21:40:07 2009 From: dougb at FreeBSD.org (Doug Barton) Date: Tue Sep 15 21:40:17 2009 Subject: ports/138861: sysutils/policykit depends on optional component for docbook-xsl Message-ID: <200909152140.n8FLe7BS001149@freefall.freebsd.org> The following reply was made to PR ports/138861; it has been noted by GNATS. From: Doug Barton To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138861: sysutils/policykit depends on optional component for docbook-xsl Date: Tue, 15 Sep 2009 14:33:58 -0700 The problem actually seems to be worse than I thought, policykit doesn't compile for me at all without that docbook.xsl file so I had to reinstall docbook-xsl with all the OPTIONS checked. hth, Doug -- This .signature sanitized for your protection From wahjava.ml at gmail.com Wed Sep 16 04:13:07 2009 From: wahjava.ml at gmail.com (Ashish SHUKLA) Date: Wed Sep 16 04:13:13 2009 Subject: Issues with latest version of inkscape on 8.0-BETA4 Message-ID: <86bplbtv1c.fsf@chateau.d.if> Skipped content of type multipart/signed-------------- next part -------------- GeoIP-1.4.6 ImageMagick-6.5.5.7 ORBit2-2.14.17 aalib-1.4.r5_4 abiword-2.6.8_3 adns-1.4_1 amspsfnt-1.0_5 appres-1.0.1 apr-ipv6-gdbm-db43-ldap-1.3.8.1.3.9 asciidoc-8.4.5_1 aspell-0.60.6_2 atk-1.26.0 aumix-gtk-2.8_5 autoconf-2.13.000227_6 autoconf-2.62 autoconf-wrapper-20071109 automake-1.10.1 automake-1.4.6_5 automake-1.6.3_1 automake-1.9.6_3 automake-wrapper-20071109 avahi-app-0.6.25_2 avahi-gtk-0.6.25_1 babl-0.0.22_1 base64-1.5_1 bash-4.0.24 bazaar-ng-1.18 bdftopcf-1.0.1 bigreqsproto-1.0.2 bison-2.4.1,1 bitlbee-otr-1.2.3_2 bitmap-1.0.3_1 bitstream-vera-1.10_4 boehm-gc+threaded+fulldebug-6.8 boost-jam-1.39.0 boost-libs-1.39.0 bsdadminscripts-6.1.1 bsdpan-Mail-SpamAssassin-CompiledRegexps-body_0-1.0 bsdpan-Mail-SpamAssassin-CompiledRegexps-body_500-1.0 ca_root_nss-3.11.9_2 cairo-1.8.8,1 cairomm-1.8.2 cdiff-1.5 cdparanoia-3.9.8_8 cmpsfont-1.0_6 compositeproto-0.4 conkeror-20090821 consolekit-0.3.0_8 conspire-0.20_2 cpuid-3.3_5 ctrlproxy-3.0.8_3 cups-client-1.3.10_4 curl-7.19.6_1 cvsps-2.1 cyrus-sasl-2.1.23 damageproto-1.1.0_2 db41-4.1.25_4 db43-4.3.29_1 dbus-1.2.4.6_1 dbus-glib-0.82 dejavu-2.29 desktop-file-utils-0.15_1 dict-1.11.1 dirac-1.0.2 dirmngr-1.0.3 djbfft-0.76_2 dmenu-4.0 dmidecode-2.10 dmxproto-2.2.2 docbook-1.4 docbook-4.1_3 docbook-4.2 docbook-4.3 docbook-4.4_2 docbook-4.5_2 docbook-5.0_1 docbook-sk-4.1.2_4 docbook-xml-4.2_1 docbook-xml-4.3 docbook-xml-4.4_1 docbook-xml-4.5 docbook-xsl-1.75.1 dri-7.4.4,2 dri2proto-2.0 dzen2-0.8.5_1 e2fsprogs-1.41.8 e2fsprogs-libuuid-1.41.8 emacs-23.1 en-freebsd-doc-20090525 enchant-1.4.2 encodings-1.0.2,1 eog-2.26.3_1 epiphany-2.26.3_3 esound-0.2.41 evieext-1.0.2 evince-2.26.2_2 evolution-data-server-2.26.3_1 exempi-2.1.1 exiv2-0.18,1 expat-2.0.1 faac-1.28 faad2-2.7_1,1 faces-1.7.7_9 farsight2-0.0.15 fastest_cvsup-0.2.9_6 feh-1.3.4_6 fetchmail-6.3.11_1 ffcall-1.10_1 ffmpeg-0.5,1 ffmpeg2theora-0.24 fftw3-3.2.2_1 file-roller-2.26.3_1,1 findutils-4.4.2 firefox-3.5.3,1 fixesproto-4.0 flac-1.2.1_1 flex-2.5.35_1 flickcurl-1.13 font-adobe-100dpi-1.0.0_1 font-adobe-75dpi-1.0.0 font-adobe-utopia-100dpi-1.0.1 font-adobe-utopia-75dpi-1.0.1 font-adobe-utopia-type1-1.0.1 font-alias-1.0.1 font-arabic-misc-1.0.0 font-bh-100dpi-1.0.0 font-bh-75dpi-1.0.0 font-bh-lucidatypewriter-100dpi-1.0.0 font-bh-lucidatypewriter-75dpi-1.0.0 font-bh-ttf-1.0.0 font-bh-type1-1.0.0 font-bitstream-100dpi-1.0.0 font-bitstream-75dpi-1.0.0 font-bitstream-type1-1.0.0 font-cronyx-cyrillic-1.0.0 font-cursor-misc-1.0.0 font-daewoo-misc-1.0.0 font-dec-misc-1.0.0 font-ibm-type1-1.0.0 font-isas-misc-1.0.0 font-jis-misc-1.0.0 font-micro-misc-1.0.0 font-misc-cyrillic-1.0.0 font-misc-ethiopic-1.0.0 font-misc-meltho-1.0.0_1 font-misc-misc-1.0.0 font-mutt-misc-1.0.0 font-schumacher-misc-1.0.0_1 font-screen-cyrillic-1.0.1 font-sony-misc-1.0.0 font-sun-misc-1.0.0 font-util-1.0.1 font-winitzki-cyrillic-1.0.0 font-xfree86-type1-1.0.1 fontcacheproto-0.1.2 fontconfig-2.6.0,1 fonts-indic-2.1.5_1 fontsproto-2.0.2 freetype2-2.3.9_1 fribidi-0.19.2_1 fusefs-kmod-0.3.9.p1.20080208_6 fusefs-libs-2.7.4 gamin-0.1.10_3 gawk-3.1.6_1 gcalctool-5.26.3_1,2 gconf-editor-2.26.0_1,1 gconf2-2.26.2_1 gd-2.0.35_1,1 gdbm-1.8.3_3 gdm-2.26.1_7 gedit-2.26.3_1 getopt-1.1.4_1 gettext-0.17_1 ghc-6.10.4 ghostscript8-8.64_6 giblib-1.2.4_7 giggle-0.4.91_1 gio-fam-backend-2.20.5 git-1.6.4.2 gle-3.1.0_2 glib-2.20.5 glibmm-2.20.1,1 glitz-0.5.6_2 glproto-1.4.10 gmake-3.81_3 gmpc-0.18.0_1,1 gmpc-libnotify-0.18.0_1 gnome-applets-2.26.3_1 gnome-audio-2.22.2 gnome-backgrounds-2.24.1 gnome-control-center-2.26.0_2 gnome-desktop-2.26.3_1 gnome-doc-utils-0.16.1_1 gnome-icon-theme-2.26.0_2 gnome-keyring-2.26.3_1 gnome-media-2.26.0_5 gnome-menus-2.26.2 gnome-mime-data-2.18.0_3 gnome-mount-0.8_3 gnome-panel-2.26.3_1 gnome-screensaver-2.26.1_3 gnome-session-2.26.2_1 gnome-settings-daemon-2.26.1_2 gnome-system-monitor-2.26.2_1 gnome-terminal-2.26.3.1_2 gnome-themes-2.26.3.1_1 gnome-user-docs-2.26.2 gnome-utils-2.26.0_2,1 gnome-vfs-2.24.1_1 gnome2-lite-2.26.3 gnome_subr-1.0 gnomehier-2.3_12 gnugo-3.6 gnupg-2.0.13 gnutls-2.8.3 gob2-2.0.16 goffice-0.4.3_6 gpac-libgpac-0.4.5_2,1 gperf-3.0.3 gpgme-1.2.0 graphviz-2.24.0_1 gsed-4.1.5_1 gsfonts-8.11_5 gsm-1.0.13 gstreamer-0.10.24 gstreamer-ffmpeg-0.10.8 gstreamer-plugins-0.10.24,3 gstreamer-plugins-a52dec-0.10.12,3 gstreamer-plugins-bad-0.10.14,3 gstreamer-plugins-cdparanoia-0.10.24_1,3 gstreamer-plugins-core-0.10_10 gstreamer-plugins-dts-0.10.14,3 gstreamer-plugins-dvd-0.10.12,3 gstreamer-plugins-esound-0.10.16,3 gstreamer-plugins-fluendo-mp3-0.10.7_1 gstreamer-plugins-gconf-0.10.16,3 gstreamer-plugins-gio-0.10.24,3 gstreamer-plugins-good-0.10.16,3 gstreamer-plugins-hal-0.10.16,3 gstreamer-plugins-libpng-0.10.16,3 gstreamer-plugins-mad-0.10.12,3 gstreamer-plugins-mp3-0.10.0_1 gstreamer-plugins-mpeg2dec-0.10.12,3 gstreamer-plugins-ogg-0.10.24,3 gstreamer-plugins-pango-0.10.24,3 gstreamer-plugins-soup-0.10.16,3 gstreamer-plugins-theora-0.10.24,3 gstreamer-plugins-ugly-0.10.12,3 gstreamer-plugins-vorbis-0.10.24,3 gstreamer-plugins-xvid-0.10.14,3 gtar-1.22 gtk-2.16.6 gtk-engines2-2.18.2_1 gtk-nodoka-engine-0.7.2_1 gtkmm-2.16.0_1 gtksourceview2-2.6.2_1 gtkspell-2.0.15_1 gucharmap-2.26.3.1_1 guile-1.8.6_2 gvfs-1.2.3_2 gwhois-20081227 hal-0.5.11_26 help2man-1.36.4_3 hicolor-icon-theme-0.10_2 hotssh-0.2.6_3 hs-ghc-paths-0.1.0.5 hs-haddock-2.5.0 hs-haddock-doc-2.4.2 hs-hscolour-1.15 hs-hscolour-doc-1.15 hs-utf8-string-ghc-0.3.5 hs-x11-ghc-1.4.5_2 hs-x11-xft-ghc-0.3_2 iceauth-1.0.2 icon-naming-utils-0.8.7 icu-3.8.1_2 imlib2-1.4.1.000_2,2 inconsolata-ttf-20090215 indic-ttf-fonts-0.5.4 inkscape-0.46_6 inputproto-1.5.0 intltool-0.40.6 irssi-0.8.14_1 iso-codes-3.10.3 iso8879-1986_2 ispell-3.3.02_4 jasper-1.900.1_8 javavmwrapper-2.3.3 jbigkit-1.6 jpeg-7 kbproto-1.0.3 keychain-2.6.9 lame-3.98.2_2 lcms-1.18a_1,1 leafnode-1.11.7 libFS-1.0.1 libGL-7.4.4 libGLU-7.4.4 libICE-1.0.4_1,1 libIDL-0.8.13 libSM-1.1.0_1,1 libX11-1.2.1_1,1 libXScrnSaver-1.1.3 libXTrap-1.0.0 libXau-1.0.4 libXaw-1.0.5_1,1 libXcomposite-0.4.0,1 libXcursor-1.1.9_1 libXdamage-1.1.1 libXdmcp-1.0.2_1 libXevie-1.0.2 libXext-1.0.5,1 libXfixes-4.0.3_1 libXfont-1.3.4,1 libXfontcache-1.0.4 libXft-2.1.13 libXi-1.2.1,1 libXinerama-1.0.3,1 libXmu-1.0.4,1 libXp-1.0.0,1 libXpm-3.5.7 libXrandr-1.3.0 libXrender-0.9.4_1 libXres-1.0.3_3 libXt-1.0.5_1 libXtst-1.0.3_1 libXv-1.0.4,1 libXvMC-1.0.4_1 libXxf86dga-1.0.2 libXxf86misc-1.0.1 libXxf86vm-1.0.2 liba52-0.7.4_2 libamrnb-7.0.0.2,1 libamrwb-7.0.0.3 libao-0.8.8_1 libart_lgpl-2.3.20,1 libassuan-1.0.5 libaudiofile-0.2.6 libbonobo-2.24.1 libbonoboui-2.24.1_1 libcanberra-0.10_5 libcddb-1.3.0 libcdio-0.78.2_2 libcheck-0.9.6 libchk-1.10.1 libcroco-0.6.2 libdaemon-0.12 libdca-0.0.5 libdmx-1.0.2_1 libdrm-2.4.12 libdv-1.0.0_1 libdvdcss-1.2.10_1 libdvdnav-0.1.10_4 libdvdread-4.1.3_1 libepc-0.3.10_1 liberation-fonts-ttf-1.04,1 libexecinfo-1.1_3 libexif-0.6.17 libfontenc-1.0.4 libfpx-1.2.0.12_1 libgalago-0.5.2_2 libgcrypt-1.4.4 libggi-2.2.2_3,1 libgii-1.0.2_2 libglade2-2.6.4_1 libglademm-2.6.7_1 libglut-7.4.4 libgmp-4.3.1 libgnome-2.26.0_1 libgnomecanvas-2.26.0_1 libgnomekbd-2.26.0_1 libgnomeprint-2.18.6 libgnomeprintui-2.18.4_1 libgnomeui-2.24.1_1 libgpg-error-1.7 libgphoto2-2.4.7 libgsf-1.14.15_1 libgsf-gnome-1.14.15_1 libgtop-2.26.1 libgweather-2.26.2.1_1 libical-0.43_1 libiconv-1.13.1 libid3tag-0.15.1b libidn-1.14 libkate-0.1.12_2 libksba-1.0.7 liblqr-1-0.4.1 libltdl-2.2.6a libmaa-1.1.1,1 libmad-0.15.1b_2 libmikmod-esound-3.1.11_2 libmms-0.4_1 libmng-1.0.10_1 libmodplug-0.8.7 libmowgli-0.7.0 libmpcdec-1.2.6 libmpd-0.18.0 libmpeg2-0.5.1 libmspack-0.0.20060920 libmusicbrainz-2.1.5 libnice-0.0.9 libnotify-0.4.5_1 libogg-1.1.4,4 liboil-0.3.16 liboldX-1.0.1 libotf-0.9.9 libotr-3.2.0_1 libpci-2.2.8_1 libpciaccess-0.10.6 libpdel-0.5.3_4 libproxy-0.2.3 libpthread-stubs-0.1 libpurple-2.6.2 librsvg2-2.26.0_1 libsamplerate-0.1.7_1 libsexy-0.1.11_2 libshout2-2.2.2_3,1 libsigc++-2.2.4.2 libsigsegv-2.5 libsmi-0.4.8 libsndfile-1.0.20_1 libsoup-2.26.3_2 libspectre-0.2.2_1 libssh2-1.2,2 libtasn1-2.3 libtheora-1.0_1 libtool-2.2.6a libtorrent-0.12.4 libungif-4.1.4_5 libutempter-1.1.5_1 libvolume_id-0.81.1 libvorbis-1.2.3,3 libwmf-0.2.8.4_4 libwnck-2.26.2_1 libwww-5.4.0_4 libxcb-1.4_1 libxkbfile-1.0.5 libxkbui-1.0.2_1 libxklavier-3.9,1 libxml++-2.26.1 libxml2-2.7.4 libxslt-1.1.24_2 libxul-1.9.0.13 links-2.2_1,1 linuxlibertine-4.4.1 liveMedia-2009.09.04,1 lsof-4.83A,4 luit-1.0.3_1 lynx-2.8.6.5_5,1 lzo2-2.03_2 lzop-1.02.r1 m17n-db-1.5.5 m17n-lib-1.5.5_2 m4-1.4.13,1 mairix-0.21_1 makedepend-1.0.1,1 metacity-2.26.0_1 mime-support-3.46.1 mkbold-mkitalic-0.11_1 mkfontdir-1.0.4 mkfontscale-1.0.6 mp32ogg-0.11_2 mpc-0.15 mpd-5.3 mpeg4ip-libmp4v2-1.6.1 mpg123-1.9.0 mpg321-0.2.10_7 mplayer-0.99.11_14 mplayer-skins-1.1.2_6 musicpd-0.15_1 mutt-devel-1.5.20_1 mysql-client-5.1.38 mysql-server-5.1.38 nasm-2.05.01,1 nautilus-2.26.3_2 ncmpcpp-0.4 neon28-0.28.4 netpbm-10.26.63_1 netspeed_applet-0.15.2_1 newfile-1.0.14_2 nginx-0.7.61_1 notification-daemon-0.4.0_2 nspr-4.8 nss-3.12.4 nss_mdns-0.10_1 open-motif-2.2.3_6 openjdk6-b16_2 openjpeg-1.3_1 openldap-client-2.4.18 p5-Algorithm-C3-0.08 p5-Algorithm-Diff-1.1902 p5-Alien-wxWidgets-0.44 p5-Any-Moose-0.10 p5-App-Nopaste-0.10 p5-AppConfig-1.66 p5-Archive-Tar-1.54 p5-Archive-Zip-1.30 p5-Array-Compare-2.01 p5-AutoLoader-5.69 p5-AutoXS-Header-1.02 p5-B-Hooks-EndOfScope-0.08 p5-B-Keywords-1.09 p5-B-Utils-0.08 p5-Bit-Vector-7.0 p5-CGI-Simple-1.112 p5-CGI.pm-3.47,1 p5-Cache-2.04_1 p5-Cache-Cache-1.06 p5-Capture-Tiny-0.06 p5-Carp-Clan-6.00_1 p5-Catalyst-Action-RenderView-0.11 p5-Catalyst-Devel-1.20 p5-Catalyst-Manual-5.8000,1 p5-Catalyst-Plugin-ConfigLoader-0.27 p5-Catalyst-Plugin-Static-Simple-0.21 p5-Catalyst-Runtime-5.80011_1 p5-Catalyst-View-Mason-0.17 p5-CatalystX-Component-Traits-0.06 p5-Class-Accessor-0.33 p5-Class-Accessor-Chained-0.01_1 p5-Class-Accessor-Grouped-0.09000 p5-Class-Adapter-1.05 p5-Class-Base-0.03 p5-Class-C3-0.21 p5-Class-C3-Adopt-NEXT-0.12 p5-Class-C3-Componentised-1.0005 p5-Class-C3-XS-0.11 p5-Class-Container-0.12 p5-Class-Data-Inheritable-0.08 p5-Class-Inspector-1.24 p5-Class-MOP-0.92 p5-Class-MakeMethods-1.010 p5-Class-Multimethods-Pure-0.13 p5-Class-Unload-0.05 p5-Class-XSAccessor-1.03,1 p5-Class-XSAccessor-Array-1.04 p5-Clipboard-0.09_1 p5-Clone-0.31 p5-Compress-Raw-Bzip2-2.021 p5-Compress-Raw-Zlib-2.021 p5-Compress-Zlib-2.015 p5-Config-Any-0.17 p5-Config-General-2.44 p5-Config-INI-0.014 p5-Config-Tiny-2.12 p5-Crypt-OpenSSL-Bignum-0.04 p5-Crypt-OpenSSL-RSA-0.25 p5-Crypt-OpenSSL-Random-0.04 p5-DBD-SQLite-1.25 p5-DBD-mysql51-4.012 p5-DBI-1.60.9 p5-DBIx-Class-0.08111 p5-Data-Alias-1.07 p5-Data-Bind-0.30 p5-Data-Dump-1.15 p5-Data-Dump-Streamer-2.09 p5-Data-OptList-0.104 p5-Data-Page-2.01 p5-Data-Visitor-0.26 p5-Date-Calc-5.7 p5-Date-Manip-5.54 p5-Devel-Caller-2.03 p5-Devel-Cycle-1.10 p5-Devel-Dumpvar-1.05 p5-Devel-GlobalDestruction-0.02 p5-Devel-LexAlias-0.04 p5-Devel-PPPort-3.19 p5-Devel-REPL-1.003007 p5-Devel-StackTrace-1.22 p5-Devel-Symdump-2.0800 p5-Digest-HMAC-1.01 p5-Digest-MD5-2.39 p5-Digest-SHA-5.47 p5-Digest-SHA1-2.12 p5-Email-Address-1.88.9 p5-Email-MIME-1.863 p5-Email-MIME-ContentType-1.01.5 p5-Email-MIME-Encodings-1.313 p5-Email-MIME-Modifier-1.444 p5-Email-MessageID-1.401 p5-Email-Simple-2.00.5 p5-Encode-2.35 p5-Encode-Detect-1.01 p5-Error-0.17015 p5-Exception-Class-1.29 p5-ExtUtils-CBuilder-0.2603.01 p5-ExtUtils-Depends-0.302 p5-ExtUtils-MakeMaker-6.54 p5-ExtUtils-Manifest-1.56 p5-ExtUtils-ParseXS-2.20 p5-ExtUtils-XSpp-0.04 p5-File-ChangeNotify-0.07 p5-File-Copy-Recursive-0.38 p5-File-Find-Rule-0.30_1 p5-File-HomeDir-0.86 p5-File-Modified-0.07_1 p5-File-NFSLock-1.20 p5-File-Next-1.06 p5-File-Path-2.07_1 p5-File-Remove-1.42 p5-File-ShareDir-1.00_1 p5-File-ShareDir-PAR-0.05 p5-File-Slurp-9999.13 p5-File-Temp-0.22 p5-File-Which-0.05 p5-File-pushd-1.00 p5-GD-2.44 p5-Getopt-Long-Descriptive-0.077 p5-Graph-0.91,1 p5-GraphViz-2.04_1 p5-HTML-Mason-1.42 p5-HTML-Parser-3.62 p5-HTML-Tagset-3.20 p5-HTML-Tree-3.23 p5-HTTP-Body-1.05_1 p5-HTTP-Proxy-0.24 p5-HTTP-Recorder-0.05_1 p5-HTTP-Request-AsCGI-0.9 p5-HTTP-Request-Params-1.01 p5-HTTP-Server-Simple-0.40 p5-Heap-0.80 p5-Hook-LexWrap-0.22 p5-IO-1.25,1 p5-IO-Compress-Base-2.015 p5-IO-Compress-Bzip2-2.015 p5-IO-Compress-Zlib-2.015 p5-IO-Socket-INET6-2.56 p5-IO-Socket-SSL-1.30 p5-IO-String-1.08 p5-IO-Tty-1.08 p5-IO-Zlib-1.10 p5-IO-stringy-2.110 p5-IPC-Run-0.84 p5-IPC-Run3-0.043 p5-IPC-ShareLite-0.17 p5-Image-Info-1.29 p5-Image-Size-3.2 p5-JSON-2.15 p5-JSON-Any-1.21 p5-LWP-Authen-Wsse-0.05 p5-Lexical-Persistence-1.01 p5-List-MoreUtils-0.25.02 p5-Locale-Msgfmt-0.14 p5-MIME-Base64-3.08 p5-MIME-Types-1.27 p5-MP3-Info-1.24 p5-MRO-Compat-0.11 p5-Mail-DKIM-0.36 p5-Mail-SPF-2.006 p5-Mail-SpamAssassin-3.2.5_4 p5-Mail-Tools-2.04 p5-Math-BigInt-1.89 p5-Mixin-Linewise-0.002 p5-Module-Build-0.35 p5-Module-Compile-0.20 p5-Module-CoreList-2.18 p5-Module-Find-0.08 p5-Module-Install-0.91 p5-Module-Pluggable-3.9 p5-Module-Refresh-0.13 p5-Module-ScanDeps-0.94 p5-Module-Starter-1.50 p5-Moose-0.89 p5-Moose-Autobox-0.09 p5-MooseX-AttributeHelpers-0.21 p5-MooseX-Emulate-Class-Accessor-Fast-0.00902 p5-MooseX-Getopt-0.22 p5-MooseX-MethodAttributes-0.15 p5-MooseX-Object-Pluggable-0.0011 p5-MooseX-Params-Validate-0.12 p5-MooseX-SemiAffordanceAccessor-0.05 p5-MooseX-Traits-Pluggable-0.07 p5-MooseX-Types-0.20 p5-Mouse-0.28 p5-NEXT-0.64 p5-Net-DBus-0.33.6 p5-Net-DNS-0.65 p5-Net-DNS-Resolver-Programmable-0.003 p5-Net-IP-1.25_1 p5-Net-SMTP-SSL-1.01 p5-Net-SSLeay-1.35_2 p5-NetAddr-IP-4.02.7 p5-Number-Compare-0.01 p5-OLE-Storage_Lite-0.18 p5-ORLite-1.25 p5-ORLite-Migrate-0.03 p5-PAR-0.99.4 p5-PAR-Dist-0.46 p5-PPI-1.206 p5-PPIx-EditorTools-0.08 p5-PadWalker-1.9 p5-Padre-0.40 p5-Params-Util-1.00 p5-Params-Validate-0.91 p5-Parse-ErrorString-Perl-0.13 p5-Parse-ExuberantCTags-1.01 p5-Parse-RecDescent-1.962.2 p5-Parse-Yapp-1.05 p5-Path-Class-0.17 p5-PathTools-3.3000 p5-Perl6-Junction-1.40000 p5-Pod-Abstract-0.19 p5-Pod-Coverage-0.20 p5-Pod-POM-0.25 p5-Pod-Parser-1.38 p5-Pod-Simple-3.08 p5-Probe-Perl-0.01 p5-Pugs-Compiler-Rule-0.37_1 p5-ReadLine-Gnu-1.19 p5-Readonly-1.03_1 p5-SQL-Abstract-1.58 p5-SQL-Abstract-Limit-0.141 p5-SQL-Translator-0.09.004_1 p5-Scalar-List-Utils-1.21,1 p5-Scope-Guard-0.03 p5-Socket6-0.23 p5-Spiffy-0.30 p5-Spreadsheet-ParseExcel-0.49,1 p5-Storable-2.21 p5-String-RewritePrefix-0.004 p5-String-ShellQuote-1.03 p5-Sub-Exporter-0.982 p5-Sub-Install-0.925 p5-Sub-Multi-0.003 p5-Sub-Name-0.04 p5-Sub-Uplevel-0.2002 p5-Task-Weaken-1.03 p5-Template-Toolkit-2.22_1 p5-Term-ReadKey-2.30 p5-Test-Base-0.59 p5-Test-ClassAPI-1.06 p5-Test-Deep-0.106 p5-Test-Differences-0.4801 p5-Test-Exception-0.27 p5-Test-Memory-Cycle-1.04 p5-Test-Most-0.21 p5-Test-NoWarnings-0.084 p5-Test-Pod-Coverage-1.08 p5-Test-Script-1.03_1 p5-Test-Simple-0.94 p5-Test-SubCalls-1.09 p5-Test-Tester-0.10.7 p5-Test-Warn-0.21 p5-Text-Balanced-2.02 p5-Text-Diff-1.37 p5-Text-FindIndent-0.04 p5-Text-Glob-0.08 p5-Text-Iconv-1.7 p5-Text-ParseWords-3.27 p5-Text-RecordParser-1.2.1 p5-Text-SimpleTable-2.0 p5-Text-TabularDisplay-1.22 p5-Thread-Queue-2.11 p5-Tie-IxHash-1.21 p5-Tie-ToObject-0.03_1 p5-Time-HiRes-1.9719,1 p5-TimeDate-1.16,1 p5-Tree-DAG_Node-1.06 p5-Tree-Simple-1.18 p5-Tree-Simple-VisitorFactory-0.10_1 p5-URI-1.40 p5-Variable-Magic-0.37 p5-WWW-Mechanize-1.60 p5-WWW-Pastebin-PastebinCom-Create-0.002 p5-Wx-0.92 p5-Wx-Perl-ProcessStream-0.11_1 p5-XML-DOM-1.44 p5-XML-Filter-BufferText-1.01 p5-XML-Grove-0.46.a p5-XML-Handler-YAWriter-0.23 p5-XML-LibXML-1.69,1 p5-XML-LibXML-Common-0.13 p5-XML-NamespaceSupport-1.10 p5-XML-Parser-2.36_1 p5-XML-RegExp-0.03 p5-XML-SAX-0.96 p5-XML-SAX-Expat-0.40 p5-XML-SAX-Writer-0.52 p5-XML-Simple-2.18 p5-XML-Twig-3.32 p5-XML-Writer-0.606 p5-XML-XPath-1.13 p5-XML-XQL-0.68 p5-YAML-0.70 p5-YAML-Syck-1.07 p5-YAML-Tiny-1.40 p5-ack-1.90 p5-autobox-2.55 p5-gettext-1.05_2 p5-libwww-5.831 p5-libxml-0.08 p5-namespace-autoclean-0.08 p5-namespace-clean-0.11 p5-parent-0.222 p5-subversion-1.6.5 p5-threads-1.74 p5-threads-shared-1.29 p5-type1inst-0.6.1_5 p5-v6-0.017 p5-version-0.76 pam_helper-1.0 pango-1.24.5 pangomm-2.24.0 parasite-20090819 pari-2.3.4_2 pavucontrol-0.9.7_1 pciids-20090807 pcre-7.9 perl-threaded-5.10.1 pidgin-2.6.2 pinentry-0.7.6_1 pixman-0.15.4 pkg-config-0.23_1 pkg_cutleaves-20090810 pkg_tree-1.1_1 plt-scheme-4.1.4_2 png-1.2.38 policykit-0.9_5 policykit-gnome-0.9.2_2 poppler-0.10.6_1 poppler-data-0.2.1 poppler-gtk-0.10.6_1 popt-1.14 port-authoring-tools-1.0 port-maintenance-tools-1.0_1 portaudit-0.5.13 portconf-1.4 portdowngrade-0.6_1 porteasy-2.8.4 portell-0.2_1 portlint-2.12.1 portmanager-0.4.1_9 porttools-0.99 portupgrade-devel-2.4.6 postfix-2.6.5,1 printproto-1.0.4 procmail-3.22_6 psearch-2.0.1 pth-2.0.7 pulseaudio-0.9.17_1 py26-cairo-1.8.8 py26-dbus-0.83.0_1 py26-gdata-2.0.0 py26-gnome-2.26.1_1 py26-gobject-2.16.1 py26-gstreamer-0.10.16 py26-gtk-2.14.1_1 py26-libxml2-2.7.4 py26-numeric-24.2_3 py26-orbit-2.24.0 py26-paramiko-1.7.5 py26-pycrypto-2.0.1_4 py26-pysqlite-2.3.5 py26-tkinter-2.6.2_3 py26-vte-0.20.5_3 py26-xml-0.8.4_2 pyrex-0.9.8.5_1 python-2.6,2 python26-2.6.2_3 qt4-4.5.2 qt4-accessible-4.5.2 qt4-assistant-4.5.2 qt4-assistant-adp-4.5.2 qt4-clucene-4.5.2 qt4-corelib-4.5.2 qt4-dbus-4.5.2 qt4-designer-4.5.2 qt4-doc-4.5.2 qt4-gui-4.5.2 qt4-help-4.5.2 qt4-help-tools-4.5.2 qt4-iconengines-4.5.2_1 qt4-imageformats-4.5.2 qt4-inputmethods-4.5.2 qt4-l10n-4.5.2 qt4-libQtAssistantClient-4.5.2 qt4-linguist-4.5.2 qt4-makeqpf-4.5.2 qt4-moc-4.5.2 qt4-network-4.5.2 qt4-opengl-4.5.2 qt4-phonon-4.5.2 qt4-phonon-gst-4.5.2 qt4-pixeltool-4.5.2 qt4-porting-4.5.2 qt4-qdbusviewer-4.5.2 qt4-qmake-4.5.2 qt4-qt3support-4.5.2 qt4-qtconfig-4.5.2 qt4-qtestlib-4.5.2 qt4-qvfb-4.5.2 qt4-rcc-4.5.2 qt4-script-4.5.2 qt4-scripttools-4.5.2 qt4-sql-4.5.2 qt4-sqlite-plugin-4.5.2 qt4-svg-4.5.2 qt4-uic-4.5.2 qt4-uic3-4.5.2 qt4-webkit-4.5.2 qt4-xml-4.5.2 qt4-xmlpatterns-4.5.2 qt4-xmlpatterns-tool-4.5.2 randrproto-1.3.0 rarian-0.8.1 rawrec-0.9.991 razor-agents-2.84 re2c-0.13.5 recordproto-1.13.2 renderproto-0.9.3 resourceproto-1.0.2 rsync-3.0.6 rtorrent-0.8.4_1 ruby+oniguruma-1.8.7.160_4,1 ruby18-bdb-0.6.5_1 ruby18-deplate-0.8.5 samba-libsmbclient-3.0.36 sbcl-1.0.30.0 schroedinger-1.0.7_2 scons-1.2.0_20090223 screen-4.0.3_6 scrnsaverproto-1.1.0 sdl-1.2.13_4,2 sessreg-1.0.4 setxkbmap-1.0.4 shared-mime-info-0.60_1 smproxy-1.0.2 socks5-1.0.11_5 speex-1.2.r1_2,1 sqlite3-3.6.14.2 stalonetray-0.7.6 startup-notification-0.10 subversion-1.6.5 sudo-1.6.9.20 swig-1.3.39 system-tools-backends-2.6.1_1 t1lib-5.1.2_1,1 taglib-1.5 tcl-8.5.7_1 tcl-modules-8.5.7 teTeX-base-3.0_16 teTeX-texmf-3.0_6 terminus-font-4.28_1 tex-texmflocal-1.9 texi2html-1.82,1 tiff-3.8.2_4 tk-8.5.7 totem-2.26.3_1 totem-pl-parser-2.26.2_1 trapproto-3.4.3 twm-1.0.4 unique-1.0.6_1 unzip-5.52_5 v4l_compat-1.0.20060801 videoproto-2.2.2 vim-gtk2-7.2.239 vlock-2.2.2 vorbis-tools-1.2.0_5,3 vte-0.20.5 w3m-m17n-img-0.5.2_3 wget-1.11.4_1 wireshark-1.2.1_1 wv-1.2.5_1 wxgtk2-common-2.8.10_1 wxgtk2-contrib-common-2.8.10_1 wxgtk2-unicode-2.8.10_1 wxgtk2-unicode-contrib-2.8.10_1 x11perf-1.5 x264-0.0.20081218 xauth-1.0.3 xbacklight-1.1 xbitmaps-1.0.1 xcalc-1.0.2_1 xcb-proto-1.5 xcb-util-0.3.6 xclip-0.11 xcmiscproto-1.1.2 xcmsdb-1.0.1 xcursor-themes-1.0.1_1 xcursorgen-1.0.2 xdpyinfo-1.0.3 xdriinfo-1.0.2 xev-1.0.3 xextproto-7.0.5 xf86-input-keyboard-1.3.2_2 xf86-input-mouse-1.4.0_6 xf86-video-ati-6.12.2_1 xf86-video-intel-2.7.1 xf86-video-mach64-6.8.1 xf86-video-nv-2.1.13_1 xf86-video-openchrome-0.2.903_2 xf86-video-r128-6.8.0_3 xf86-video-radeonhd-1.2.5_2 xf86-video-vesa-2.1.0_2 xf86bigfontproto-1.1.2 xf86dga-1.0.2_1 xf86dgaproto-2.0.3 xf86driproto-2.0.4 xf86miscproto-0.9.2 xf86vidmodeproto-2.2.2 xgamma-1.0.2 xgc-1.0.1_1 xhost-1.0.2 xineramaproto-1.1.2 xinit-1.1.1_1 xinput-1.4.2 xkbcomp-1.0.5 xkbevd-1.0.2 xkbutils-1.0.1_2 xkeyboard-config-1.6_1 xkill-1.0.1 xlsatoms-1.0.1 xlsclients-1.0.1 xmlcatmgr-2.2 xmlcharent-0.3_2 xmlrpc-c-devel-1.18.00 xmlto-0.0.21 xmodmap-1.0.3 xmonad-0.8.1_2 xmonad-contrib-0.8.1_3 xorg-7.4_2 xorg-apps-7.4_1 xorg-docs-1.4,1 xorg-drivers-7.4_2 xorg-fonts-100dpi-7.4 xorg-fonts-7.4 xorg-fonts-75dpi-7.4 xorg-fonts-cyrillic-7.4 xorg-fonts-miscbitmaps-7.4 xorg-fonts-truetype-7.4 xorg-fonts-type1-7.4 xorg-libraries-7.4 xorg-macros-1.2.1 xorg-server-1.6.1,1 xpi-foxyproxy-2.14 xpi-pencil-1.0.6 xpr-1.0.2 xprop-1.0.4 xproto-7.0.15 xrandr-1.3.0 xrdb-1.0.5 xrefresh-1.0.2 xscreensaver-gnome-hacks-5.10 xset-1.0.4 xsetmode-1.0.0 xsetroot-1.0.2 xterm-247 xtrans-1.2.3 xvid-1.2.2_1,1 xvinfo-1.0.2 xwd-1.0.2 xwininfo-1.0.4 xwud-1.0.1 yasm-0.8.0 yelp-2.26.0_1 youtube_dl-2009.06.29 zenity-2.26.0_1 zip-3.0 zsh-4.3.10_2 zziplib-0.13.58_1 From romain at blogreen.org Wed Sep 16 10:55:36 2009 From: romain at blogreen.org (Romain =?iso-8859-1?Q?Tarti=E8re?=) Date: Wed Sep 16 10:55:43 2009 Subject: Issues with latest version of inkscape on 8.0-BETA4 In-Reply-To: <86bplbtv1c.fsf@chateau.d.if> References: <86bplbtv1c.fsf@chateau.d.if> Message-ID: <20090916105532.GA1700@blogreen.org> Hi! On Wed, Sep 16, 2009 at 09:12:23AM +0530, Ashish SHUKLA wrote: > I've installed graphics/inkscape port few hours ago. And after running it for > the first time, I got following error messages on my xterm: > > #v+ > % uname -a > FreeBSD chateau.d.if 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > % inkscape > /usr/local/share/inkscape/extensions/render_barcode.inx:1: parser error : XML declaration allowed only at the start of the document > > ^ > > ** (inkscape:22071): CRITICAL **: Inkscape::Extension::Extension* Inkscape::Extension::build_from_reprdoc(Inkscape::XML::Document*, Inkscape::Extension::Implementation::Implementation*): assertion `doc != NULL' failed > > ** (inkscape:22071): WARNING **: Unable to create extension from definition file /usr/local/share/inkscape/extensions/render_barcode.inx. > > /usr/local/share/inkscape/templates/default.svg:1: parser error : XML declaration allowed only at the start of the document > > ^ > > ** (inkscape:22071): CRITICAL **: SPDesktop* sp_file_new(const Glib::ustring&): assertion `doc != NULL' failed > #v- > > No inkscape window appeared on the desktop during this, so I've to kill the > process using C-c. [snip] > libxml2-2.7.4 It's broken... Infos and patch (not tested) in the git repository of libxml2: http://git.gnome.org/cgit/libxml2/commit/?id=9d3d141c412baa5c713ad3df48f1a4d179e07b05 -- Romain Tarti?re http://romain.blogreen.org/ pgp: 8DAB A124 0DA4 7024 F82A E748 D8E9 A33F FF56 FF43 (ID: 0xFF56FF43) (plain text =non-HTML= PGP/GPG encrypted/signed e-mail much appreciated) -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090916/270fe40d/attachment.pgp From edwin at FreeBSD.org Wed Sep 16 12:01:03 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Wed Sep 16 12:01:09 2009 Subject: ports/138877: [PATCH] security/nss: Fix build on sparc64 Message-ID: <200909161201.n8GC12H6007087@freefall.freebsd.org> Synopsis: [PATCH] security/nss: Fix build on sparc64 Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Wed Sep 16 12:01:01 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=138877 From linimon at FreeBSD.org Wed Sep 16 12:14:03 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Wed Sep 16 12:14:14 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Message-ID: <200909161214.n8GCE269022404@freefall.freebsd.org> Old Synopsis: epiphany doesn't work when WITH_GECKO=libxul New Synopsis: www/epiphany doesn't work when WITH_GECKO=libxul Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: linimon Responsible-Changed-When: Wed Sep 16 12:13:32 UTC 2009 Responsible-Changed-Why: Fix synopsis and assign. http://www.freebsd.org/cgi/query-pr.cgi?pr=138872 From kwm at rainbow-runner.nl Wed Sep 16 15:40:03 2009 From: kwm at rainbow-runner.nl (Koop Mast) Date: Wed Sep 16 15:40:10 2009 Subject: Issues with latest version of inkscape on 8.0-BETA4 In-Reply-To: <20090916105532.GA1700@blogreen.org> References: <86bplbtv1c.fsf@chateau.d.if> <20090916105532.GA1700@blogreen.org> Message-ID: <1253114571.2187.3.camel@headache.rainbow-runner.nl> On Wed, 2009-09-16 at 12:55 +0200, Romain Tarti?re wrote: > Hi! > > On Wed, Sep 16, 2009 at 09:12:23AM +0530, Ashish SHUKLA wrote: > > I've installed graphics/inkscape port few hours ago. And after running it for > > the first time, I got following error messages on my xterm: > > > > #v+ > > % uname -a > > FreeBSD chateau.d.if 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > > % inkscape > > /usr/local/share/inkscape/extensions/render_barcode.inx:1: parser error : XML declaration allowed only at the start of the document > > > > ^ > > > > ** (inkscape:22071): CRITICAL **: Inkscape::Extension::Extension* Inkscape::Extension::build_from_reprdoc(Inkscape::XML::Document*, Inkscape::Extension::Implementation::Implementation*): assertion `doc != NULL' failed > > > > ** (inkscape:22071): WARNING **: Unable to create extension from definition file /usr/local/share/inkscape/extensions/render_barcode.inx. > > > > /usr/local/share/inkscape/templates/default.svg:1: parser error : XML declaration allowed only at the start of the document > > > > ^ > > > > ** (inkscape:22071): CRITICAL **: SPDesktop* sp_file_new(const Glib::ustring&): assertion `doc != NULL' failed > > #v- > > > > No inkscape window appeared on the desktop during this, so I've to kill the > > process using C-c. > > [snip] > > > libxml2-2.7.4 > > It's broken... Infos and patch (not tested) in the git repository of libxml2: > http://git.gnome.org/cgit/libxml2/commit/?id=9d3d141c412baa5c713ad3df48f1a4d179e07b05 > > This should be fixed in 2.7.4_1. Thanks for the git pointer. -Koop From redchin at gmail.com Wed Sep 16 21:07:42 2009 From: redchin at gmail.com (Kevin Downey) Date: Wed Sep 16 21:07:48 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul In-Reply-To: <200909161214.n8GCE269022404@freefall.freebsd.org> References: <200909161214.n8GCE269022404@freefall.freebsd.org> Message-ID: <1d3ed48c0909161407t6b14c8ccw8c7eec16858808b9@mail.gmail.com> epiphany ditched gecko for webkit a while back, the next gnome release (2.28?) which will apparently land sometime after the 8.0 release will have the webkit backed epiphany. the webkit version of epiphany is in marcuscom ports: http://www.freebsd.org/gnome/docs/develfaq.html On Wed, Sep 16, 2009 at 5:14 AM, wrote: > Old Synopsis: epiphany doesn't work when WITH_GECKO=libxul > New Synopsis: www/epiphany doesn't work when WITH_GECKO=libxul > > Responsible-Changed-From-To: freebsd-ports-bugs->gnome > Responsible-Changed-By: linimon > Responsible-Changed-When: Wed Sep 16 12:13:32 UTC 2009 > Responsible-Changed-Why: > Fix synopsis and assign. > > http://www.freebsd.org/cgi/query-pr.cgi?pr=138872 > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > -- And what is good, Phaedrus, And what is not good? Need we ask anyone to tell us these things? From linimon at lonesome.com Wed Sep 16 22:00:15 2009 From: linimon at lonesome.com (Mark Linimon) Date: Wed Sep 16 22:00:25 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Message-ID: <200909162200.n8GM0Fno006744@freefall.freebsd.org> The following reply was made to PR ports/138872; it has been noted by GNATS. From: Mark Linimon To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Date: Wed, 16 Sep 2009 16:59:51 -0500 ----- Forwarded message from Kevin Downey ----- Subject: Re: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul From: Kevin Downey To: linimon@freebsd.org Cc: freebsd-ports-bugs@freebsd.org, gnome@freebsd.org epiphany ditched gecko for webkit a while back, the next gnome release (2.28?) which will apparently land sometime after the 8.0 release will have the webkit backed epiphany. the webkit version of epiphany is in marcuscom ports: http://www.freebsd.org/gnome/docs/develfaq.html ----- End forwarded message ----- From linimon at lonesome.com Wed Sep 16 22:10:03 2009 From: linimon at lonesome.com (Mark Linimon) Date: Wed Sep 16 22:10:09 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Message-ID: <200909162210.n8GMA3vm016453@freefall.freebsd.org> The following reply was made to PR ports/138872; it has been noted by GNATS. From: Mark Linimon To: Kevin Downey Cc: bug-followup@freebsd.org, gnome@freebsd.org Subject: Re: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Date: Wed, 16 Sep 2009 17:00:30 -0500 On Wed, Sep 16, 2009 at 02:07:41PM -0700, Kevin Downey wrote: > epiphany ditched gecko for webkit a while back, the next gnome release > (2.28?) which will apparently land sometime after the 8.0 release will > have the webkit backed epiphany. the webkit version of epiphany is in > marcuscom ports: http://www.freebsd.org/gnome/docs/develfaq.html ok, should this PR just be closed then? I don't understand. mcl From linimon at lonesome.com Wed Sep 16 22:20:10 2009 From: linimon at lonesome.com (Mark Linimon) Date: Wed Sep 16 22:20:17 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul In-Reply-To: <1d3ed48c0909161407t6b14c8ccw8c7eec16858808b9@mail.gmail.com> References: <200909161214.n8GCE269022404@freefall.freebsd.org> <1d3ed48c0909161407t6b14c8ccw8c7eec16858808b9@mail.gmail.com> Message-ID: <20090916220030.GD15983@lonesome.com> On Wed, Sep 16, 2009 at 02:07:41PM -0700, Kevin Downey wrote: > epiphany ditched gecko for webkit a while back, the next gnome release > (2.28?) which will apparently land sometime after the 8.0 release will > have the webkit backed epiphany. the webkit version of epiphany is in > marcuscom ports: http://www.freebsd.org/gnome/docs/develfaq.html ok, should this PR just be closed then? I don't understand. mcl From pav at FreeBSD.org Wed Sep 16 22:29:13 2009 From: pav at FreeBSD.org (Pav Lucistnik) Date: Wed Sep 16 22:29:19 2009 Subject: librsvg - firefox Message-ID: <1253140134.29192.68.camel@hood.oook.cz> Hi gang, with firefox2 forbidden and stuff, shouldn't we flip the browser_plugin option in librsvg2 port to default-off? Forbidden firefox now blocks the default package of librsvg2 from being created ... -- Pav Lucistnik How will you recognize experienced hacker from beginner? Beginner thinks that kilobyte have 1000 bytes. Experienced hacker thinks one kilometer have 1024 meters. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: Toto je =?UTF-8?Q?digit=C3=A1ln=C4=9B?= =?ISO-8859-1?Q?_podepsan=E1?= =?UTF-8?Q?_=C4=8D=C3=A1st?= =?ISO-8859-1?Q?_zpr=E1vy?= Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090916/d8cd8461/attachment.pgp From areilly at bigpond.net.au Wed Sep 16 23:05:49 2009 From: areilly at bigpond.net.au (Andrew Reilly) Date: Wed Sep 16 23:05:56 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul In-Reply-To: <1d3ed48c0909161407t6b14c8ccw8c7eec16858808b9@mail.gmail.com> References: <200909161214.n8GCE269022404@freefall.freebsd.org> <1d3ed48c0909161407t6b14c8ccw8c7eec16858808b9@mail.gmail.com> Message-ID: <20090916230538.GB1790@duncan.reilly.home> On Wed, Sep 16, 2009 at 02:07:41PM -0700, Kevin Downey wrote: > epiphany ditched gecko for webkit a while back, the next gnome release > (2.28?) which will apparently land sometime after the 8.0 release will > have the webkit backed epiphany. the webkit version of epiphany is in > marcuscom ports: http://www.freebsd.org/gnome/docs/develfaq.html OK, I've read the cvs-cgi faq and the epiphany Makefile on marcuscom, and I don't want to destabilize my GNOME install, so I think I'll just wait until 2.28 comes out as the official release. That means that the pr can be closed as far as I'm concerned, but it might be useful to add a patch to the current Makefile so that the build breaks if WITH_GECKO=libxul. Cheers, -- Andrew From marcus at FreeBSD.org Thu Sep 17 03:00:16 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Thu Sep 17 03:00:32 2009 Subject: ports/138877: [PATCH] security/nss: Fix build on sparc64 Message-ID: <200909170300.n8H3099K009314@freefall.freebsd.org> Synopsis: [PATCH] security/nss: Fix build on sparc64 State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Thu Sep 17 02:59:54 UTC 2009 State-Changed-Why: Committed, thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=138877 From dfilter at FreeBSD.ORG Thu Sep 17 03:00:16 2009 From: dfilter at FreeBSD.ORG (dfilter service) Date: Thu Sep 17 03:00:32 2009 Subject: ports/138877: commit references a PR Message-ID: <200909170300.n8H30F54009360@freefall.freebsd.org> The following reply was made to PR ports/138877; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138877: commit references a PR Date: Thu, 17 Sep 2009 02:59:59 +0000 (UTC) marcus 2009-09-17 02:59:49 UTC FreeBSD ports repository Modified files: security/nss/files patch-..::coreconf::FreeBSD.mk Log: Fix the build on sparc64. PR: 138877 Submitted by: beat Feature safe: yes Revision Changes Path 1.13 +10 -5 ports/security/nss/files/patch-..::coreconf::FreeBSD.mk _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" From marcus at FreeBSD.org Thu Sep 17 04:46:27 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Thu Sep 17 04:46:33 2009 Subject: ports/138665: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo Message-ID: <200909170446.n8H4kQSS019049@freefall.freebsd.org> Synopsis: Build fails of x11-toolkits/py-gtk2, dependent on wrong version of cairo State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Thu Sep 17 04:45:31 UTC 2009 State-Changed-Why: The current default version of Python is 2.6, and that is what GNOME supports. If you need to use a different version, then you will not be able to build the default GNOME Desktop. It will be up to you to maintain an earlier version of py-cairo which supports Python 2.5. http://www.freebsd.org/cgi/query-pr.cgi?pr=138665 From wahjava.ml at gmail.com Thu Sep 17 10:08:32 2009 From: wahjava.ml at gmail.com (Ashish SHUKLA) Date: Thu Sep 17 10:08:39 2009 Subject: Issues with latest version of inkscape on 8.0-BETA4 In-Reply-To: <20090916105532.GA1700@blogreen.org> References: <86bplbtv1c.fsf@chateau.d.if> <20090916105532.GA1700@blogreen.org> Message-ID: <20090917100816.GA4570@chateau.d.if> In <20090916105532.GA1700@blogreen.org>, Romain Tarti?re wrote: [...] >It's broken... Infos and patch (not tested) in the git repository of libxml2: >http://git.gnome.org/cgit/libxml2/commit/?id=9d3d141c412baa5c713ad3df48f1a4d179e07b05 I'll try that patch with libxml2. I hope I don't have to rebuild Inkscape. Thanks -- Ashish SHUKLA -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090917/a93fe06d/attachment.pgp From mezz7 at cox.net Thu Sep 17 11:17:29 2009 From: mezz7 at cox.net (Jeremy Messenger) Date: Thu Sep 17 11:17:37 2009 Subject: librsvg - firefox In-Reply-To: <1253140134.29192.68.camel@hood.oook.cz> References: <1253140134.29192.68.camel@hood.oook.cz> Message-ID: On Wed, 16 Sep 2009 17:28:54 -0500, Pav Lucistnik wrote: > Hi gang, > > with firefox2 forbidden and stuff, shouldn't we flip the browser_plugin > option in librsvg2 port to default-off? Forbidden firefox now blocks the > default package of librsvg2 from being created ... Yeah, we should kill it. I think Firefox can render SVG w/out this plugin. Cheers, Mezz -- mezz7@cox.net - mezz@FreeBSD.org FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - gnome@FreeBSD.org From pav at FreeBSD.org Thu Sep 17 11:37:02 2009 From: pav at FreeBSD.org (Pav Lucistnik) Date: Thu Sep 17 11:37:09 2009 Subject: librsvg - firefox In-Reply-To: References: <1253140134.29192.68.camel@hood.oook.cz> Message-ID: <1253187416.2366.23.camel@pav.hide.vol.cz> Jeremy Messenger p??e v ?t 17. 09. 2009 v 06:20 -0500: > On Wed, 16 Sep 2009 17:28:54 -0500, Pav Lucistnik wrote: > > > Hi gang, > > > > with firefox2 forbidden and stuff, shouldn't we flip the browser_plugin > > option in librsvg2 port to default-off? Forbidden firefox now blocks the > > default package of librsvg2 from being created ... > > Yeah, we should kill it. Yes, please. > I think Firefox can render SVG w/out this plugin. Confirmed. -- Pav Lucistnik coat; door; pub; pint. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: Toto je =?UTF-8?Q?digit=C3=A1ln=C4=9B?= =?ISO-8859-1?Q?_podepsan=E1?= =?UTF-8?Q?_=C4=8D=C3=A1st?= =?ISO-8859-1?Q?_zpr=E1vy?= Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090917/90991238/attachment.pgp From marcus at marcuscom.com Thu Sep 17 15:53:15 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Thu Sep 17 15:53:21 2009 Subject: librsvg - firefox In-Reply-To: References: <1253140134.29192.68.camel@hood.oook.cz> Message-ID: <1253202788.38842.17.camel@shumai.marcuscom.com> On Thu, 2009-09-17 at 06:20 -0500, Jeremy Messenger wrote: > On Wed, 16 Sep 2009 17:28:54 -0500, Pav Lucistnik wrote: > > > Hi gang, > > > > with firefox2 forbidden and stuff, shouldn't we flip the browser_plugin > > option in librsvg2 port to default-off? Forbidden firefox now blocks the > > default package of librsvg2 from being created ... > > Yeah, we should kill it. I think Firefox can render SVG w/out this plugin. The plug-in can and does build with libxul. Just remove everything from USE_GECKO except libxul. Joe > > Cheers, > Mezz > > -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090917/009ac7d1/attachment.pgp From marcus at marcuscom.com Thu Sep 17 15:53:26 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Thu Sep 17 15:53:32 2009 Subject: Issues with latest version of inkscape on 8.0-BETA4 In-Reply-To: <20090917100816.GA4570@chateau.d.if> References: <86bplbtv1c.fsf@chateau.d.if> <20090916105532.GA1700@blogreen.org> <20090917100816.GA4570@chateau.d.if> Message-ID: <1253202803.38842.18.camel@shumai.marcuscom.com> On Thu, 2009-09-17 at 15:38 +0530, Ashish SHUKLA wrote: > In <20090916105532.GA1700@blogreen.org>, Romain Tarti?re wrote: > > [...] > > >It's broken... Infos and patch (not tested) in the git repository of libxml2: > >http://git.gnome.org/cgit/libxml2/commit/?id=9d3d141c412baa5c713ad3df48f1a4d179e07b05 > > I'll try that patch with libxml2. I hope I don't have to rebuild Inkscape. No, it should just work. Joe > > Thanks -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090917/0751c63f/attachment.pgp From andy at neu.net Thu Sep 17 17:49:20 2009 From: andy at neu.net (AN) Date: Thu Sep 17 17:49:26 2009 Subject: no sound from Flash9 plugin Message-ID: I'm having a problem getting sound to play in Flash9, the video works fine. I followed the instructions from http://crnl.org/blog/2008/11/01/flash-9-for-freebsd-71 and the install completed without problems. System info: uname -a FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Gnome 2.26.3 firefox-3.5.3,1 Web browser based on the browser portion of Mozilla linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux Fedora 10) linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library (Linux linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X Windows (Linux Fe linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora 10) linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin linux_base-f10-10_2 Base set of packages needed in Linux mode for i386/amd64 (L part of dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Sep 17 10:42:34 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Sep 17 10:42:34 test kernel: The Regents of the University of California. All rights reserved. Sep 17 10:42:34 test kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Sep 17 10:42:34 test kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC 2009 Sep 17 10:42:34 test kernel: root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Sep 17 10:42:34 test kernel: WARNING: WITNESS option enabled, expect reduced performance. Sep 17 10:42:34 test kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Sep 17 10:42:34 test kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (2333.08-MHz K8-class CPU) Sep 17 10:42:34 test kernel: Origin = "GenuineIntel" Id = 0x10677 Stepping = 7 Sep 17 10:42:34 test kernel: Features=0xbfebfbff Sep 17 10:42:34 test kernel: Features2=0x8e39d Sep 17 10:42:34 test kernel: AMD Features=0x20100800 Sep 17 10:42:34 test kernel: AMD Features2=0x1 Sep 17 10:42:34 test kernel: TSC: P-state invariant Sep 17 10:42:34 test kernel: real memory = 4294967296 (4096 MB) Sep 17 10:42:34 test kernel: avail memory = 4104114176 (3913 MB) Sep 17 10:42:34 test kernel: ACPI APIC Table: Sep 17 10:42:34 test kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Sep 17 10:42:34 test kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) Sound is working for all system sounds, and multimedia apps like totem. Any help is really appreciated, please let me know if there is more info that I need to provide. TIA From amvandemore at gmail.com Thu Sep 17 19:09:15 2009 From: amvandemore at gmail.com (Adam Vande More) Date: Thu Sep 17 19:09:21 2009 Subject: no sound from Flash9 plugin In-Reply-To: References: Message-ID: <6201873e0909171140l5471d8adld0b58c4f6ce2e383@mail.gmail.com> On Thu, Sep 17, 2009 at 12:49 PM, AN wrote: > I'm having a problem getting sound to play in Flash9, the video works fine. > I followed the instructions from > http://crnl.org/blog/2008/11/01/flash-9-for-freebsd-71 and the install > completed without problems. > > System info: > > uname -a > FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC > 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > > Gnome 2.26.3 > > firefox-3.5.3,1 Web browser based on the browser portion of Mozilla > linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin > linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux Fedora > 10) > linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) > linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library > (Linux > linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X > Windows (Linux Fe > linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) > linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) > linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) > linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) > linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) > linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora 10) > linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) > linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin > linux_base-f10-10_2 Base set of packages needed in Linux mode for > i386/amd64 (L > > > part of dmesg: > Copyright (c) 1992-2009 The FreeBSD Project. > Sep 17 10:42:34 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, > 1989, 1991, 1992, 1993, 1994 > Sep 17 10:42:34 test kernel: The Regents of the University of California. > All rights reserved. > Sep 17 10:42:34 test kernel: FreeBSD is a registered trademark of The > FreeBSD Foundation. > Sep 17 10:42:34 test kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC > 2009 > Sep 17 10:42:34 test kernel: root@mason.cse.buffalo.edu: > /usr/obj/usr/src/sys/GENERIC > Sep 17 10:42:34 test kernel: WARNING: WITNESS option enabled, expect > reduced performance. > Sep 17 10:42:34 test kernel: Timecounter "i8254" frequency 1193182 Hz > quality 0 > Sep 17 10:42:34 test kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ > 2.33GHz (2333.08-MHz K8-class CPU) > Sep 17 10:42:34 test kernel: Origin = "GenuineIntel" Id = 0x10677 Stepping > = 7 > Sep 17 10:42:34 test kernel: > Features=0xbfebfbff > Sep 17 10:42:34 test kernel: > Features2=0x8e39d > Sep 17 10:42:34 test kernel: AMD Features=0x20100800 > Sep 17 10:42:34 test kernel: AMD Features2=0x1 > Sep 17 10:42:34 test kernel: TSC: P-state invariant > Sep 17 10:42:34 test kernel: real memory = 4294967296 (4096 MB) > Sep 17 10:42:34 test kernel: avail memory = 4104114176 (3913 MB) > Sep 17 10:42:34 test kernel: ACPI APIC Table: > Sep 17 10:42:34 test kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 > CPUs > Sep 17 10:42:34 test kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) > > Sound is working for all system sounds, and multimedia apps like totem. Any > help is really appreciated, please let me know if there is more info that I > need to provide. > > TIA > You need to install /usr/ports/www/linux-f10-flashplugin10 not flash9. -- Adam Vande More From oberman at es.net Thu Sep 17 19:37:38 2009 From: oberman at es.net (Kevin Oberman) Date: Thu Sep 17 19:39:07 2009 Subject: no sound from Flash9 plugin In-Reply-To: Your message of "Thu, 17 Sep 2009 17:49:16 -0000." Message-ID: <20090917193736.624011CC39@ptavv.es.net> > Date: Thu, 17 Sep 2009 17:49:16 +0000 (GMT) > From: AN > Sender: owner-freebsd-gnome@freebsd.org > > I'm having a problem getting sound to play in Flash9, the video works > fine. I followed the instructions from http://crnl.org/blog/2008/11/01/flash-9-for-freebsd-71 > and the install completed without problems. > > System info: > > uname -a > FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 > UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > amd64 > > Gnome 2.26.3 > > firefox-3.5.3,1 Web browser based on the browser portion of Mozilla > linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin > linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux > Fedora 10) > linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) > linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library > (Linux > linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X > Windows (Linux Fe > linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) > linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) > linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) > linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) > linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) > linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora 10) > linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) > linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin > linux_base-f10-10_2 Base set of packages needed in Linux mode for > i386/amd64 (L > > > part of dmesg: > Copyright (c) 1992-2009 The FreeBSD Project. > Sep 17 10:42:34 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, > 1989, 1991, 1992, 1993, 1994 > Sep 17 10:42:34 test kernel: The Regents of the University of California. > All rights reserved. > Sep 17 10:42:34 test kernel: FreeBSD is a registered trademark of The > FreeBSD Foundation. > Sep 17 10:42:34 test kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC > 2009 > Sep 17 10:42:34 test kernel: > root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Sep 17 10:42:34 test kernel: WARNING: WITNESS option enabled, expect > reduced performance. > Sep 17 10:42:34 test kernel: Timecounter "i8254" frequency 1193182 Hz > quality 0 > Sep 17 10:42:34 test kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ > 2.33GHz (2333.08-MHz K8-class CPU) > Sep 17 10:42:34 test kernel: Origin = "GenuineIntel" Id = 0x10677 > Stepping = 7 > Sep 17 10:42:34 test kernel: > Features=0xbfebfbff > Sep 17 10:42:34 test kernel: > Features2=0x8e39d > Sep 17 10:42:34 test kernel: AMD Features=0x20100800 > Sep 17 10:42:34 test kernel: AMD Features2=0x1 > Sep 17 10:42:34 test kernel: TSC: P-state invariant > Sep 17 10:42:34 test kernel: real memory = 4294967296 (4096 MB) > Sep 17 10:42:34 test kernel: avail memory = 4104114176 (3913 MB) > Sep 17 10:42:34 test kernel: ACPI APIC Table: > Sep 17 10:42:34 test kernel: FreeBSD/SMP: Multiprocessor System Detected: > 4 CPUs > Sep 17 10:42:34 test kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) > > Sound is working for all system sounds, and multimedia apps like totem. > Any help is really appreciated, please let me know if there is more info > that I need to provide. > > TIA > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > Andy, This has been a known issue with Flash9 since Adobe fixed a security problem a couple of months ago. Since Flash does not support the OSS audio used by FreeBSD, they probably were unaware that they were breaking the sound. The only solution I have seen is to install Flash10 (linux-f10-flash10). Since linux_base-f10 is the standard Linux emulation for 8.0, I suggest that you replace all of your linux-* ports with "linux-f10-*" ports. If you use portupgrade, 'portupgrade -o emulators/linux_base-f10 linux_base'. Use a similar command for all of your linux-* ports. Look in /usr/ports/UPDATING, you will find a discussion of updating linux to f10. Note that users will need to update the nsplugingwrapper plug-ins before Flash10 will work. I believe that 'nspluginwrapper -u' should do the trick. (Remember that it must be run by each user while logged into his or her own account.) -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From andy at neu.net Thu Sep 17 20:14:22 2009 From: andy at neu.net (AN) Date: Thu Sep 17 20:14:38 2009 Subject: no sound from Flash9 plugin In-Reply-To: <20090917193736.624011CC39@ptavv.es.net> References: <20090917193736.624011CC39@ptavv.es.net> Message-ID: On Thu, 17 Sep 2009, Kevin Oberman wrote: >> Date: Thu, 17 Sep 2009 17:49:16 +0000 (GMT) >> From: AN >> Sender: owner-freebsd-gnome@freebsd.org >> >> I'm having a problem getting sound to play in Flash9, the video works >> fine. I followed the instructions from http://crnl.org/blog/2008/11/01/flash-9-for-freebsd-71 >> and the install completed without problems. >> >> System info: >> >> uname -a >> FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 >> UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >> amd64 >> >> Gnome 2.26.3 >> >> firefox-3.5.3,1 Web browser based on the browser portion of Mozilla >> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin >> linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux >> Fedora 10) >> linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) >> linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library >> (Linux >> linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X >> Windows (Linux Fe >> linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) >> linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) >> linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) >> linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) >> linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) >> linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora 10) >> linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) >> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin >> linux_base-f10-10_2 Base set of packages needed in Linux mode for >> i386/amd64 (L >> >> >> part of dmesg: >> Copyright (c) 1992-2009 The FreeBSD Project. >> Sep 17 10:42:34 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, >> 1989, 1991, 1992, 1993, 1994 >> Sep 17 10:42:34 test kernel: The Regents of the University of California. >> All rights reserved. >> Sep 17 10:42:34 test kernel: FreeBSD is a registered trademark of The >> FreeBSD Foundation. >> Sep 17 10:42:34 test kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC >> 2009 >> Sep 17 10:42:34 test kernel: >> root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >> Sep 17 10:42:34 test kernel: WARNING: WITNESS option enabled, expect >> reduced performance. >> Sep 17 10:42:34 test kernel: Timecounter "i8254" frequency 1193182 Hz >> quality 0 >> Sep 17 10:42:34 test kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ >> 2.33GHz (2333.08-MHz K8-class CPU) >> Sep 17 10:42:34 test kernel: Origin = "GenuineIntel" Id = 0x10677 >> Stepping = 7 >> Sep 17 10:42:34 test kernel: >> Features=0xbfebfbff >> Sep 17 10:42:34 test kernel: >> Features2=0x8e39d >> Sep 17 10:42:34 test kernel: AMD Features=0x20100800 >> Sep 17 10:42:34 test kernel: AMD Features2=0x1 >> Sep 17 10:42:34 test kernel: TSC: P-state invariant >> Sep 17 10:42:34 test kernel: real memory = 4294967296 (4096 MB) >> Sep 17 10:42:34 test kernel: avail memory = 4104114176 (3913 MB) >> Sep 17 10:42:34 test kernel: ACPI APIC Table: >> Sep 17 10:42:34 test kernel: FreeBSD/SMP: Multiprocessor System Detected: >> 4 CPUs >> Sep 17 10:42:34 test kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) >> >> Sound is working for all system sounds, and multimedia apps like totem. >> Any help is really appreciated, please let me know if there is more info >> that I need to provide. >> >> TIA >> _______________________________________________ >> freebsd-gnome@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome >> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" >> > > Andy, > > This has been a known issue with Flash9 since Adobe fixed a security > problem a couple of months ago. Since Flash does not support the OSS > audio used by FreeBSD, they probably were unaware that they were > breaking the sound. > > The only solution I have seen is to install Flash10 > (linux-f10-flash10). > > Since linux_base-f10 is the standard Linux emulation for 8.0, I suggest > that you replace all of your linux-* ports with "linux-f10-*" ports. If > you use portupgrade, 'portupgrade -o emulators/linux_base-f10 > linux_base'. Use a similar command for all of your linux-* ports. Look > in /usr/ports/UPDATING, you will find a discussion of updating linux to > f10. > > Note that users will need to update the nsplugingwrapper plug-ins before > Flash10 will work. I believe that 'nspluginwrapper -u' should do the > trick. (Remember that it must be run by each user while logged into his > or her own account.) > -- > R. Kevin Oberman, Network Engineer > Energy Sciences Network (ESnet) > Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) > E-mail: oberman@es.net Phone: +1 510 486-8634 > Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 Hi Kevin: Thanks for your reply. I installed linux-f10-flash10 as you suggested. pkg_info | grep linux-f10-flashplugin-10.0r32 linux-f10-flashplugin-10.0r32 Adobe Flash Player NPAPI Plugin I had already installed linux_base-f10-10_2, see above. I tried to execute nspluginwrapper -u, and I received this response: nspluginwrapper: expected plugin(s) file name to update Now, flash does not work at all. Previously I had video, but no sound, and now nothing. I tried the following command, cd /usr/local/lib/firefox3/plugins && ln -s /usr/local/lib/browser_plugins/npwrapper.libflashplayer.so npwrapper.libflashplayer.so but still nothing. Any other ideas, what other info can I provide to troubleshoot? Thanks From amvandemore at gmail.com Thu Sep 17 20:24:56 2009 From: amvandemore at gmail.com (Adam Vande More) Date: Thu Sep 17 20:25:03 2009 Subject: no sound from Flash9 plugin In-Reply-To: References: <20090917193736.624011CC39@ptavv.es.net> Message-ID: <6201873e0909171324l3f8a64cey98d14d71e6ae4e81@mail.gmail.com> On Thu, Sep 17, 2009 at 3:14 PM, AN wrote: > > On Thu, 17 Sep 2009, Kevin Oberman wrote: > > Date: Thu, 17 Sep 2009 17:49:16 +0000 (GMT) >>> From: AN >>> Sender: owner-freebsd-gnome@freebsd.org >>> >>> I'm having a problem getting sound to play in Flash9, the video works >>> fine. I followed the instructions from >>> http://crnl.org/blog/2008/11/01/flash-9-for-freebsd-71 >>> and the install completed without problems. >>> >>> System info: >>> >>> uname -a >>> FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 >>> UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >>> amd64 >>> >>> Gnome 2.26.3 >>> >>> firefox-3.5.3,1 Web browser based on the browser portion of Mozilla >>> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin >>> linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux >>> Fedora 10) >>> linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) >>> linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library >>> (Linux >>> linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X >>> Windows (Linux Fe >>> linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) >>> linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) >>> linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) >>> linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) >>> linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) >>> linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora >>> 10) >>> linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) >>> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin >>> linux_base-f10-10_2 Base set of packages needed in Linux mode for >>> i386/amd64 (L >>> >>> >>> part of dmesg: >>> Copyright (c) 1992-2009 The FreeBSD Project. >>> Sep 17 10:42:34 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, >>> 1989, 1991, 1992, 1993, 1994 >>> Sep 17 10:42:34 test kernel: The Regents of the University of California. >>> All rights reserved. >>> Sep 17 10:42:34 test kernel: FreeBSD is a registered trademark of The >>> FreeBSD Foundation. >>> Sep 17 10:42:34 test kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 >>> UTC >>> 2009 >>> Sep 17 10:42:34 test kernel: >>> root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >>> Sep 17 10:42:34 test kernel: WARNING: WITNESS option enabled, expect >>> reduced performance. >>> Sep 17 10:42:34 test kernel: Timecounter "i8254" frequency 1193182 Hz >>> quality 0 >>> Sep 17 10:42:34 test kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ >>> 2.33GHz (2333.08-MHz K8-class CPU) >>> Sep 17 10:42:34 test kernel: Origin = "GenuineIntel" Id = 0x10677 >>> Stepping = 7 >>> Sep 17 10:42:34 test kernel: >>> >>> Features=0xbfebfbff >>> Sep 17 10:42:34 test kernel: >>> >>> Features2=0x8e39d >>> Sep 17 10:42:34 test kernel: AMD Features=0x20100800 >>> Sep 17 10:42:34 test kernel: AMD Features2=0x1 >>> Sep 17 10:42:34 test kernel: TSC: P-state invariant >>> Sep 17 10:42:34 test kernel: real memory = 4294967296 (4096 MB) >>> Sep 17 10:42:34 test kernel: avail memory = 4104114176 (3913 MB) >>> Sep 17 10:42:34 test kernel: ACPI APIC Table: >>> Sep 17 10:42:34 test kernel: FreeBSD/SMP: Multiprocessor System Detected: >>> 4 CPUs >>> Sep 17 10:42:34 test kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) >>> >>> Sound is working for all system sounds, and multimedia apps like totem. >>> Any help is really appreciated, please let me know if there is more info >>> that I need to provide. >>> >>> TIA >>> _______________________________________________ >>> freebsd-gnome@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome >>> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" >>> >>> >> Andy, >> >> This has been a known issue with Flash9 since Adobe fixed a security >> problem a couple of months ago. Since Flash does not support the OSS >> audio used by FreeBSD, they probably were unaware that they were >> breaking the sound. >> >> The only solution I have seen is to install Flash10 >> (linux-f10-flash10). >> >> Since linux_base-f10 is the standard Linux emulation for 8.0, I suggest >> that you replace all of your linux-* ports with "linux-f10-*" ports. If >> you use portupgrade, 'portupgrade -o emulators/linux_base-f10 >> linux_base'. Use a similar command for all of your linux-* ports. Look >> in /usr/ports/UPDATING, you will find a discussion of updating linux to >> f10. >> >> Note that users will need to update the nsplugingwrapper plug-ins before >> Flash10 will work. I believe that 'nspluginwrapper -u' should do the >> trick. (Remember that it must be run by each user while logged into his >> or her own account.) >> -- >> R. Kevin Oberman, Network Engineer >> Energy Sciences Network (ESnet) >> Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) >> E-mail: oberman@es.net Phone: +1 510 486-8634 >> Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 >> > > > Hi Kevin: > > Thanks for your reply. I installed linux-f10-flash10 as you suggested. > > pkg_info | grep linux-f10-flashplugin-10.0r32 > linux-f10-flashplugin-10.0r32 Adobe Flash Player NPAPI Plugin > > I had already installed linux_base-f10-10_2, see above. I tried to execute > nspluginwrapper -u, and I received this response: nspluginwrapper: expected > plugin(s) file name to update > > Now, flash does not work at all. Previously I had video, but no sound, and > now nothing. I tried the following command, cd > /usr/local/lib/firefox3/plugins && ln -s /usr/local/lib/browser_plugins/ > npwrapper.libflashplayer.so npwrapper.libflashplayer.so but still nothing. > > Any other ideas, what other info can I provide to troubleshoot? > > Thanks nspluginwrapper -i /usr/local/lib/npapi/linux-f10-flashplugin/libflashplayer.so -- Adam Vande More From barbara.xxx1975 at libero.it Thu Sep 17 20:27:19 2009 From: barbara.xxx1975 at libero.it (barbara) Date: Thu Sep 17 20:27:25 2009 Subject: about UPDATING, 20090917 Message-ID: Sorry to bug you...but about the note on UPDATING, the one about firefox->libxul, I would like to report build failure on (at least) www/mplayer-plugin even if seamonkey is installed. (libxul-1.9.0.13, firefox-3.5.3,1, seamonkey-1.1.18) If the port could not be fixed, maybe that should be added to the note. Thanks Barbara From miwi at FreeBSD.org Thu Sep 17 20:32:21 2009 From: miwi at FreeBSD.org (Martin Wilke) Date: Thu Sep 17 20:32:28 2009 Subject: about UPDATING, 20090917 In-Reply-To: References: Message-ID: <20090917203216.GF92158@bsdcrew.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thu, Sep 17, 2009 at 10:27:17PM +0200, barbara wrote: > Sorry to bug you...but about the note on UPDATING, the one about firefox->libxul, I would like to report build failure on (at least) www/mplayer-plugin even if seamonkey is installed. (libxul-1.9.0.13, firefox-3.5.3,1, seamonkey-1.1.18) > If the port could not be fixed, maybe that should be added to the note. that's a know issus, we're working on that. - - Martin for gecko@ > > Thanks > Barbara > > > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > - -- +-----------------------+-------------------------------+ | PGP : 0xB1E6FCE9 | Jabber : miwi(at)BSDCrew.de | | Skype : splash_111 | Mail : miwi(at)FreeBSD.org | +-----------------------+-------------------------------+ | Mess with the Best, Die like the Rest! | +-----------------------+-------------------------------+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkqynNAACgkQdLJIhLHm/OkHNQCguRQfuRo1/XazvUXGxqp7mDX/ rYkAnikGRWZ1cUcIUW/d1F+b3cOs18zS =0DOT -----END PGP SIGNATURE----- From oberman at es.net Thu Sep 17 20:34:25 2009 From: oberman at es.net (Kevin Oberman) Date: Thu Sep 17 20:34:36 2009 Subject: no sound from Flash9 plugin In-Reply-To: Your message of "Thu, 17 Sep 2009 20:14:16 -0000." Message-ID: <20090917203423.374B31CC37@ptavv.es.net> > Date: Thu, 17 Sep 2009 20:14:16 +0000 (GMT) > From: AN > > > > On Thu, 17 Sep 2009, Kevin Oberman wrote: > > >> Date: Thu, 17 Sep 2009 17:49:16 +0000 (GMT) > >> From: AN > >> Sender: owner-freebsd-gnome@freebsd.org > >> > >> I'm having a problem getting sound to play in Flash9, the video works > >> fine. I followed the instructions from http://crnl.org/blog/2008/11/01/flash-9-for-freebsd-71 > >> and the install completed without problems. > >> > >> System info: > >> > >> uname -a > >> FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 > >> UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > >> amd64 > >> > >> Gnome 2.26.3 > >> > >> firefox-3.5.3,1 Web browser based on the browser portion of Mozilla > >> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin > >> linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux > >> Fedora 10) > >> linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) > >> linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library > >> (Linux > >> linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X > >> Windows (Linux Fe > >> linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) > >> linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) > >> linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) > >> linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) > >> linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) > >> linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora 10) > >> linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) > >> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin > >> linux_base-f10-10_2 Base set of packages needed in Linux mode for > >> i386/amd64 (L > >> > >> > >> part of dmesg: > >> Copyright (c) 1992-2009 The FreeBSD Project. > >> Sep 17 10:42:34 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, > >> 1989, 1991, 1992, 1993, 1994 > >> Sep 17 10:42:34 test kernel: The Regents of the University of California. > >> All rights reserved. > >> Sep 17 10:42:34 test kernel: FreeBSD is a registered trademark of The > >> FreeBSD Foundation. > >> Sep 17 10:42:34 test kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC > >> 2009 > >> Sep 17 10:42:34 test kernel: > >> root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > >> Sep 17 10:42:34 test kernel: WARNING: WITNESS option enabled, expect > >> reduced performance. > >> Sep 17 10:42:34 test kernel: Timecounter "i8254" frequency 1193182 Hz > >> quality 0 > >> Sep 17 10:42:34 test kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ > >> 2.33GHz (2333.08-MHz K8-class CPU) > >> Sep 17 10:42:34 test kernel: Origin = "GenuineIntel" Id = 0x10677 > >> Stepping = 7 > >> Sep 17 10:42:34 test kernel: > >> Features=0xbfebfbff > >> Sep 17 10:42:34 test kernel: > >> Features2=0x8e39d > >> Sep 17 10:42:34 test kernel: AMD Features=0x20100800 > >> Sep 17 10:42:34 test kernel: AMD Features2=0x1 > >> Sep 17 10:42:34 test kernel: TSC: P-state invariant > >> Sep 17 10:42:34 test kernel: real memory = 4294967296 (4096 MB) > >> Sep 17 10:42:34 test kernel: avail memory = 4104114176 (3913 MB) > >> Sep 17 10:42:34 test kernel: ACPI APIC Table: > >> Sep 17 10:42:34 test kernel: FreeBSD/SMP: Multiprocessor System Detected: > >> 4 CPUs > >> Sep 17 10:42:34 test kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) > >> > >> Sound is working for all system sounds, and multimedia apps like totem. > >> Any help is really appreciated, please let me know if there is more info > >> that I need to provide. > >> > >> TIA > >> _______________________________________________ > >> freebsd-gnome@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > >> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > >> > > > > Andy, > > > > This has been a known issue with Flash9 since Adobe fixed a security > > problem a couple of months ago. Since Flash does not support the OSS > > audio used by FreeBSD, they probably were unaware that they were > > breaking the sound. > > > > The only solution I have seen is to install Flash10 > > (linux-f10-flash10). > > > > Since linux_base-f10 is the standard Linux emulation for 8.0, I suggest > > that you replace all of your linux-* ports with "linux-f10-*" ports. If > > you use portupgrade, 'portupgrade -o emulators/linux_base-f10 > > linux_base'. Use a similar command for all of your linux-* ports. Look > > in /usr/ports/UPDATING, you will find a discussion of updating linux to > > f10. > > > > Note that users will need to update the nsplugingwrapper plug-ins before > > Flash10 will work. I believe that 'nspluginwrapper -u' should do the > > trick. (Remember that it must be run by each user while logged into his > > or her own account.) > > -- > > R. Kevin Oberman, Network Engineer > > Energy Sciences Network (ESnet) > > Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) > > E-mail: oberman@es.net Phone: +1 510 486-8634 > > Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 > > > Hi Kevin: > > Thanks for your reply. I installed linux-f10-flash10 as you suggested. > > pkg_info | grep linux-f10-flashplugin-10.0r32 > linux-f10-flashplugin-10.0r32 Adobe Flash Player NPAPI Plugin > > I had already installed linux_base-f10-10_2, see above. I tried to > execute nspluginwrapper -u, and I received this response: nspluginwrapper: > expected plugin(s) file name to update > > Now, flash does not work at all. Previously I had video, but no sound, > and now nothing. I tried the following command, cd > /usr/local/lib/firefox3/plugins && ln -s > /usr/local/lib/browser_plugins/npwrapper.libflashplayer.so > npwrapper.libflashplayer.so but still nothing. > > Any other ideas, what other info can I provide to troubleshoot? > > Thanks > First, are all linux ports updated to -f10 versions? Does your make.conf contain the required lines: OVERRIDE_LINUX_BASE_PORT=f10 OVERRIDE_LINUX_NONBASE_PORTS=f10 If that is all OK, it looks like nspluginwrapper is not dealing with the update option in a useful way. nspluginwrapper -l Note the first two lines for each plug-in. nspluginwrapper -r (first line of the plug-in output above) nspluginwrapper -i (Location listed in "Original plugin" line, perhaps modified) For flash, the install line will be: nspluginwrapper -i /usr/local/lib/npapi/linux-f10-flashplugin/libflashplayer.so I had to use 'pkg_info -L linux-f10-flashplugin-10.0r32' to fine that one. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From andy at neu.net Thu Sep 17 20:45:32 2009 From: andy at neu.net (AN) Date: Thu Sep 17 20:45:38 2009 Subject: no sound from Flash9 plugin In-Reply-To: <6201873e0909171324l3f8a64cey98d14d71e6ae4e81@mail.gmail.com> References: <20090917193736.624011CC39@ptavv.es.net> <6201873e0909171324l3f8a64cey98d14d71e6ae4e81@mail.gmail.com> Message-ID: On Thu, 17 Sep 2009, Adam Vande More wrote: > On Thu, Sep 17, 2009 at 3:14 PM, AN wrote: > >> >> On Thu, 17 Sep 2009, Kevin Oberman wrote: >> >> Date: Thu, 17 Sep 2009 17:49:16 +0000 (GMT) >>>> From: AN >>>> Sender: owner-freebsd-gnome@freebsd.org >>>> >>>> I'm having a problem getting sound to play in Flash9, the video works >>>> fine. I followed the instructions from >>>> http://crnl.org/blog/2008/11/01/flash-9-for-freebsd-71 >>>> and the install completed without problems. >>>> >>>> System info: >>>> >>>> uname -a >>>> FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 >>>> UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >>>> amd64 >>>> >>>> Gnome 2.26.3 >>>> >>>> firefox-3.5.3,1 Web browser based on the browser portion of Mozilla >>>> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin >>>> linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux >>>> Fedora 10) >>>> linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) >>>> linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library >>>> (Linux >>>> linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X >>>> Windows (Linux Fe >>>> linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) >>>> linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) >>>> linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) >>>> linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) >>>> linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) >>>> linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora >>>> 10) >>>> linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) >>>> linux-flashplugin-9.0r246 Adobe Flash Player NPAPI Plugin >>>> linux_base-f10-10_2 Base set of packages needed in Linux mode for >>>> i386/amd64 (L >>>> >>>> >>>> part of dmesg: >>>> Copyright (c) 1992-2009 The FreeBSD Project. >>>> Sep 17 10:42:34 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, >>>> 1989, 1991, 1992, 1993, 1994 >>>> Sep 17 10:42:34 test kernel: The Regents of the University of California. >>>> All rights reserved. >>>> Sep 17 10:42:34 test kernel: FreeBSD is a registered trademark of The >>>> FreeBSD Foundation. >>>> Sep 17 10:42:34 test kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 >>>> UTC >>>> 2009 >>>> Sep 17 10:42:34 test kernel: >>>> root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >>>> Sep 17 10:42:34 test kernel: WARNING: WITNESS option enabled, expect >>>> reduced performance. >>>> Sep 17 10:42:34 test kernel: Timecounter "i8254" frequency 1193182 Hz >>>> quality 0 >>>> Sep 17 10:42:34 test kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ >>>> 2.33GHz (2333.08-MHz K8-class CPU) >>>> Sep 17 10:42:34 test kernel: Origin = "GenuineIntel" Id = 0x10677 >>>> Stepping = 7 >>>> Sep 17 10:42:34 test kernel: >>>> >>>> Features=0xbfebfbff >>>> Sep 17 10:42:34 test kernel: >>>> >>>> Features2=0x8e39d >>>> Sep 17 10:42:34 test kernel: AMD Features=0x20100800 >>>> Sep 17 10:42:34 test kernel: AMD Features2=0x1 >>>> Sep 17 10:42:34 test kernel: TSC: P-state invariant >>>> Sep 17 10:42:34 test kernel: real memory = 4294967296 (4096 MB) >>>> Sep 17 10:42:34 test kernel: avail memory = 4104114176 (3913 MB) >>>> Sep 17 10:42:34 test kernel: ACPI APIC Table: >>>> Sep 17 10:42:34 test kernel: FreeBSD/SMP: Multiprocessor System Detected: >>>> 4 CPUs >>>> Sep 17 10:42:34 test kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) >>>> >>>> Sound is working for all system sounds, and multimedia apps like totem. >>>> Any help is really appreciated, please let me know if there is more info >>>> that I need to provide. >>>> >>>> TIA >>>> _______________________________________________ >>>> freebsd-gnome@freebsd.org mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome >>>> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" >>>> >>>> >>> Andy, >>> >>> This has been a known issue with Flash9 since Adobe fixed a security >>> problem a couple of months ago. Since Flash does not support the OSS >>> audio used by FreeBSD, they probably were unaware that they were >>> breaking the sound. >>> >>> The only solution I have seen is to install Flash10 >>> (linux-f10-flash10). >>> >>> Since linux_base-f10 is the standard Linux emulation for 8.0, I suggest >>> that you replace all of your linux-* ports with "linux-f10-*" ports. If >>> you use portupgrade, 'portupgrade -o emulators/linux_base-f10 >>> linux_base'. Use a similar command for all of your linux-* ports. Look >>> in /usr/ports/UPDATING, you will find a discussion of updating linux to >>> f10. >>> >>> Note that users will need to update the nsplugingwrapper plug-ins before >>> Flash10 will work. I believe that 'nspluginwrapper -u' should do the >>> trick. (Remember that it must be run by each user while logged into his >>> or her own account.) >>> -- >>> R. Kevin Oberman, Network Engineer >>> Energy Sciences Network (ESnet) >>> Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) >>> E-mail: oberman@es.net Phone: +1 510 486-8634 >>> Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 >>> >> >> >> Hi Kevin: >> >> Thanks for your reply. I installed linux-f10-flash10 as you suggested. >> >> pkg_info | grep linux-f10-flashplugin-10.0r32 >> linux-f10-flashplugin-10.0r32 Adobe Flash Player NPAPI Plugin >> >> I had already installed linux_base-f10-10_2, see above. I tried to execute >> nspluginwrapper -u, and I received this response: nspluginwrapper: expected >> plugin(s) file name to update >> >> Now, flash does not work at all. Previously I had video, but no sound, and >> now nothing. I tried the following command, cd >> /usr/local/lib/firefox3/plugins && ln -s /usr/local/lib/browser_plugins/ >> npwrapper.libflashplayer.so npwrapper.libflashplayer.so but still nothing. >> >> Any other ideas, what other info can I provide to troubleshoot? >> >> Thanks > > > nspluginwrapper -i > /usr/local/lib/npapi/linux-f10-flashplugin/libflashplayer.so > > > > -- > Adam Vande More Adam: That was it, works great now. Thanks for your help. From bsam at ipt.ru Thu Sep 17 21:58:32 2009 From: bsam at ipt.ru (Boris Samorodov) Date: Thu Sep 17 21:58:39 2009 Subject: no sound from Flash9 plugin In-Reply-To: <20090917203423.374B31CC37@ptavv.es.net> (Kevin Oberman's message of "Thu\, 17 Sep 2009 13\:34\:23 -0700") References: <20090917203423.374B31CC37@ptavv.es.net> Message-ID: <67654217@ipt.ru> "Kevin Oberman" writes: >> Date: Thu, 17 Sep 2009 20:14:16 +0000 (GMT) >> From: AN >> On Thu, 17 Sep 2009, Kevin Oberman wrote: >> >> Date: Thu, 17 Sep 2009 17:49:16 +0000 (GMT) >> >> From: AN >> >> Sender: owner-freebsd-gnome@freebsd.org [...] >> >> uname -a >> >> FreeBSD test.fu.bar 8.0-BETA4 FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 [...] > Does your make.conf contain the required lines: > OVERRIDE_LINUX_BASE_PORT=f10 > OVERRIDE_LINUX_NONBASE_PORTS=f10 Just a note: for FreeBSD OSVERSION>=800076 (and 8.0-BETA4 as well) those variables are not necessary to define (they are defaults). -- WBR, bsam From edwin at FreeBSD.org Fri Sep 18 07:00:23 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Fri Sep 18 07:00:34 2009 Subject: ports/138933: building x11/xscreensaver-gnome fails Message-ID: <200909180700.n8I70NvF058457@freefall.freebsd.org> Synopsis: building x11/xscreensaver-gnome fails Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Fri Sep 18 07:00:23 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=138933 From wahjava.ml at gmail.com Fri Sep 18 16:32:48 2009 From: wahjava.ml at gmail.com (Ashish SHUKLA) Date: Fri Sep 18 16:32:55 2009 Subject: Issues with latest version of inkscape on 8.0-BETA4 In-Reply-To: <1253114571.2187.3.camel@headache.rainbow-runner.nl> References: <86bplbtv1c.fsf@chateau.d.if> <20090916105532.GA1700@blogreen.org> <1253114571.2187.3.camel@headache.rainbow-runner.nl> Message-ID: <20090918163224.GA94575@chateau.d.if> In <1253114571.2187.3.camel@headache.rainbow-runner.nl>, Koop Mast wrote: [...] >This should be fixed in 2.7.4_1. Thanks for the git pointer. Thanks that worked. -- Ashish SHUKLA -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090918/9fea69a1/attachment.pgp From marcus at FreeBSD.org Fri Sep 18 17:56:12 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Fri Sep 18 17:56:19 2009 Subject: ports/138330: x11/gnome2: in freebsd 8.0 beta3, hald segfaults withing 10 seconds of launching if a fuse filesystem is mounted Message-ID: <200909181756.n8IHuC0R034632@freefall.freebsd.org> Synopsis: x11/gnome2: in freebsd 8.0 beta3, hald segfaults withing 10 seconds of launching if a fuse filesystem is mounted State-Changed-From-To: feedback->closed State-Changed-By: marcus State-Changed-When: Fri Sep 18 17:55:57 UTC 2009 State-Changed-Why: Submitter reports it is working now. http://www.freebsd.org/cgi/query-pr.cgi?pr=138330 From linimon at FreeBSD.org Fri Sep 18 20:34:17 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Fri Sep 18 20:34:29 2009 Subject: ports/138942: textproc/libxml2: --with-threads (w/o argument) broken upstream Message-ID: <200909182034.n8IKYG3N095216@freefall.freebsd.org> Old Synopsis: libxml2: --with-threads (w/o argument) broken upstream New Synopsis: textproc/libxml2: --with-threads (w/o argument) broken upstream Responsible-Changed-From-To: freebsd-bugs->gnome Responsible-Changed-By: linimon Responsible-Changed-When: Fri Sep 18 20:33:27 UTC 2009 Responsible-Changed-Why: make this a ports PR and assign. http://www.freebsd.org/cgi/query-pr.cgi?pr=138942 From hg at queue.to Sat Sep 19 15:02:44 2009 From: hg at queue.to (Howard Goldstein) Date: Sat Sep 19 15:02:51 2009 Subject: Which GECKO for www/galeon? Message-ID: <4AB4EC4D.1000607@queue.to> What is the preferred GECKO for www/galeon? libxul doesn't seem to be an option -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 251 bytes Desc: OpenPGP digital signature Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090919/b1f1e2f7/signature.pgp From mezz7 at cox.net Sat Sep 19 15:38:44 2009 From: mezz7 at cox.net (Jeremy Messenger) Date: Sat Sep 19 15:38:51 2009 Subject: Which GECKO for www/galeon? In-Reply-To: <4AB4EC4D.1000607@queue.to> References: <4AB4EC4D.1000607@queue.to> Message-ID: On Sat, 19 Sep 2009 09:35:57 -0500, Howard Goldstein wrote: > What is the preferred GECKO for www/galeon? libxul doesn't seem to be > an option In the Makefile has: DEPRECATED= requires legacy Gecko; switch to www/epiphany instead The legacy Gecko has many security issues, so Galeon must be port to libxul or it is going to be removed. If I were you, I would move on to the different browser because Galeon is not great at keep up to date from the upstream. Cheers, Mezz -- mezz7@cox.net - mezz@FreeBSD.org FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - gnome@FreeBSD.org From marcus at FreeBSD.org Sat Sep 19 16:51:51 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Sat Sep 19 16:51:58 2009 Subject: ports/138933: building x11/xscreensaver-gnome fails Message-ID: <200909191651.n8JGpo9w001413@freefall.freebsd.org> Synopsis: building x11/xscreensaver-gnome fails State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Sat Sep 19 16:50:55 UTC 2009 State-Changed-Why: You're using non-standard CFLAGS. If you build with: -O2 -pipe -fno-strict-aliasing xscreensaver will build. If you try and add debugging symbols, or use -O you'll see this crash. http://www.freebsd.org/cgi/query-pr.cgi?pr=138933 From marcus at FreeBSD.org Sat Sep 19 16:53:09 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Sat Sep 19 16:53:16 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Message-ID: <200909191653.n8JGr9iO001598@freefall.freebsd.org> Synopsis: www/epiphany doesn't work when WITH_GECKO=libxul State-Changed-From-To: open->analyzed State-Changed-By: marcus State-Changed-When: Sat Sep 19 16:52:21 UTC 2009 State-Changed-Why: It works just fine for me. Chances are you still have firefox installed. Uninstall www/firefox, then rebuild libxul and ephy, and everything should work. Note, this PR will be moot when GNOME 2.28 is released as ephy will be using webkit-gtk2. http://www.freebsd.org/cgi/query-pr.cgi?pr=138872 From marcus at FreeBSD.org Sat Sep 19 16:58:26 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Sat Sep 19 16:58:31 2009 Subject: ports/138942: textproc/libxml2: --with-threads (w/o argument) broken upstream Message-ID: <200909191658.n8JGwPwW001833@freefall.freebsd.org> Synopsis: textproc/libxml2: --with-threads (w/o argument) broken upstream State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Sat Sep 19 16:58:14 UTC 2009 State-Changed-Why: Makefile patch committed, thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=138942 From barbara.xxx1975 at libero.it Sat Sep 19 17:00:09 2009 From: barbara.xxx1975 at libero.it (barbara) Date: Sat Sep 19 17:00:35 2009 Subject: x11-toolkits/py-gnome-extras: PKGNAMESUFFIX usage Message-ID: For curiosity, can someone comment/explain me about the usage of PKGNAMESUFFIX in x11-toolkits/py-gnome-extras? My curiosity is originated by a problem I noticed with a "non-gnome" port. Refer to the following two messages I've posted in the freebsd-ports mailing list: http://lists.freebsd.org/pipermail/freebsd-ports/2009-September/057098.html http://lists.freebsd.org/pipermail/freebsd-ports/2009-September/057103.html Thanks Barbara From dfilter at FreeBSD.ORG Sat Sep 19 17:00:10 2009 From: dfilter at FreeBSD.ORG (dfilter service) Date: Sat Sep 19 17:00:36 2009 Subject: ports/138942: commit references a PR Message-ID: <200909191700.n8JH0AF7002318@freefall.freebsd.org> The following reply was made to PR ports/138942; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138942: commit references a PR Date: Sat, 19 Sep 2009 16:58:22 +0000 (UTC) marcus 2009-09-19 16:58:09 UTC FreeBSD ports repository Modified files: textproc/libxml2 Makefile Log: Fix thread support. PR: 138942 Submitted by: andrew.w.nosenko@gmail.com Feature safe: yes Revision Changes Path 1.159 +1 -1 ports/textproc/libxml2/Makefile _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" From miwi at FreeBSD.org Sat Sep 19 17:50:56 2009 From: miwi at FreeBSD.org (Martin Wilke) Date: Sat Sep 19 17:51:03 2009 Subject: [ports-i386@FreeBSD.org: gnome-pkgview-1.0.7_1 failed on i386 7-exp] Message-ID: <20090919175051.GY4500@bsdcrew.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - ----- Forwarded message from User Ports-i386 ----- Date: Sat, 19 Sep 2009 17:39:32 GMT From: User Ports-i386 To: erwin@FreeBSD.org, miwi@FreeBSD.org, linimon@FreeBSD.org Subject: gnome-pkgview-1.0.7_1 failed on i386 7-exp X-Spam-Status: No, score=-106.5 required=5.0 tests=AWL,BAYES_00, RCVD_IN_DNSWL_MED,USER_IN_WHITELIST autolearn=ham version=3.2.5 You can also find this build log at http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.7-exp.20090917174615/gnome-pkgview-1.0.7_1.log building gnome-pkgview-1.0.7_1 on hobson9.isc.freebsd.org in directory /usr2/pkgbuild/7-exp/20090917174615/chroot/5582 building for: 7.2-STABLE i386 maintained by: gnome@FreeBSD.org port directory: /usr/ports/sysutils/gnome-pkgview Makefile ident: $FreeBSD: ports/sysutils/gnome-pkgview/Makefile,v 1.29 2009/07/31 13:55:54 dinoex Exp $ build started at Sat Sep 19 17:39:05 UTC 2009 FETCH_DEPENDS= PATCH_DEPENDS= EXTRACT_DEPENDS= BUILD_DEPENDS=ORBit2-2.14.17.tbz atk-1.26.0.tbz avahi-app-0.6.25_2.tbz bash-4.0.24.tbz bitstream-vera-1.10_4.tbz cairo-1.8.8,1.tbz cdparanoia-3.9.8_8.tbz compositeproto-0.4.tbz consolekit-0.3.0_8.tbz damageproto-1.1.0_2.tbz dbus-1.2.4.6_1.tbz dbus-glib-0.82.tbz dmidecode-2.10.tbz docbook-1.4.tbz docbook-4.1_3.tbz docbook-4.2.tbz docbook-4.3.tbz docbook-4.4_2.tbz docbook-4.5_2.tbz docbook-5.0_1.tbz docbook-sk-4.1.2_4.tbz docbook-xml-4.2_1.tbz docbook-xml-4.3.tbz docbook-xml-4.4_1.tbz docbook-xml-4.5.tbz docbook-xsl-1.75.1.tbz encodings-1.0.2,1.tbz esound-0.2.41.tbz expat-2.0.1.tbz fixesproto-4.0.tbz font-bh-ttf-1.0.0.tbz font-misc-ethiopic-1.0.0.tbz font-misc-meltho-1.0.0_1.tbz font-util-1.0.1.tbz fontconfig-2.6.0,1.tbz freetype2-2.3.9_1.tbz gamin-0.1.10_3.tbz gconf2-2.26.2_1.tbz gdbm-1.8.3_3.tbz getopt-1.1.4_1.tbz gettext-0.17_1.tbz gio-fam-backend-2.20.5.tbz glib-2.20.5.tbz gmake-3.81_3.tbz gnome-doc-utils-0.16.1_1.tbz gnome-icon-theme-2.26.0_2.tbz gnome-keyring-2.26.3_1.tbz gnome-mime-data-2.18.0_3.tbz gnome-mount-0.8_3.tbz gnome-vfs-2.24.1_1.tbz gnome_subr-1.0.tbz gnomehier-2.3_12.tbz gnutls-2.8.3.tbz gtk-2.16.6.tbz gvfs-1.2.3_2.tbz hal-0.5.11_26.tbz hicolor-icon-theme-0.10_2.tbz inputproto-1.5.0.tbz intltool-0.40.6.tbz iso8879-1986_2.tbz jasper-1.900.1_8.tbz jpeg-7.tbz kbproto-1.0.3.tbz libICE-1.0.4_1,1.tbz libIDL-0.8.13.tbz libSM-1.1.0_1,1.tbz libX11-1.2.1_1,1.tbz libXau-1.0.4.tbz libXcomposite-0.4.0,1.tbz libXcursor-1.1.9_1.tbz libXdamage-1.1.1.tbz libXdmcp-1.0.2_1.tbz libXext-1.0.5,1.tbz libXfixes-4.0.3_1.tbz libXft-2.1.13.tbz libXi-1.2.1,1.tbz libXinerama-1.0.3,1.tbz libXpm-3.5.7.tbz libXrandr-1.3.0.tbz libXrender-0.9.4_1.tbz libXt-1.0.5_1.tbz libart_lgpl-2.3.20,1.tbz libaudiofile-0.2.6_1.tbz libbonobo-2.24.1.tbz libbonoboui-2.24.1_1.tbz libcddb-1.3.0.tbz libcdio-0.78.2_2.tbz libdaemon-0.12.tbz libexif-0.6.17.tbz libfontenc-1.0.4.tbz libgcrypt-1.4.4.tbz libglade2-2.6.4_1.tbz libgnome-2.26.0_1.tbz libgnomecanvas-2.26.0_1.tbz libgnomeui-2. 24.1_1.tbz libgpg-error-1.7.tbz libgphoto2-2.4.7.tbz libicon! v-1.13.1.tbz libltdl-2.2.6a.tbz libnotify-0.4.5_1.tbz libproxy-0.2.3.tbz libpthread-stubs-0.1.tbz libsoup-2.26.3_2.tbz libtasn1-2.3.tbz libusb-0.1.12_4.tbz libvolume_id-0.81.1.tbz libxcb-1.4.tbz libxml2-2.7.4_1.tbz libxslt-1.1.24_2.tbz mkfontdir-1.0.4.tbz mkfontscale-1.0.6.tbz p5-XML-Parser-2.36_1.tbz pango-1.24.5.tbz pciids-20090807.tbz pcre-7.9.tbz perl-5.8.9_3.tbz pixman-0.15.4.tbz pkg-config-0.23_1.tbz png-1.2.40.tbz policykit-0.9_5.tbz policykit-gnome-0.9.2_2.tbz popt-1.14.tbz py26-libxml2-2.7.4.tbz python26-2.6.2_3.tbz randrproto-1.3.0.tbz rarian-0.8.1.tbz renderproto-0.9.3.tbz samba-libsmbclient-3.0.36.tbz shared-mime-info-0.60_1.tbz sqlite3-3.6.14.2.tbz startup-notification-0.10.tbz tiff-3.9.1.tbz xcb-proto-1.5.tbz xcb-util-0.3.6.tbz xextproto-7.0.5.tbz xineramaproto-1.1.2.tbz xmlcatmgr-2.2.tbz xmlcharent-0.3_2.tbz xorg-fonts-truetype-7.4.tbz xproto-7.0.15.tbz RUN_DEPENDS=ORBit2-2.14.17.tbz atk-1.26.0.tbz avahi-app-0.6.25_2.tbz bash-4.0.24.tbz bitstream-vera-1.10_4.tbz cairo-1.8.8,1.tbz cdparanoia-3.9.8_8.tbz compositeproto-0.4.tbz consolekit-0.3.0_8.tbz damageproto-1.1.0_2.tbz dbus-1.2.4.6_1.tbz dbus-glib-0.82.tbz dmidecode-2.10.tbz docbook-1.4.tbz docbook-4.1_3.tbz docbook-4.2.tbz docbook-4.3.tbz docbook-4.4_2.tbz docbook-4.5_2.tbz docbook-5.0_1.tbz docbook-sk-4.1.2_4.tbz docbook-xml-4.2_1.tbz docbook-xml-4.3.tbz docbook-xml-4.4_1.tbz docbook-xml-4.5.tbz docbook-xsl-1.75.1.tbz encodings-1.0.2,1.tbz esound-0.2.41.tbz expat-2.0.1.tbz fixesproto-4.0.tbz font-bh-ttf-1.0.0.tbz font-misc-ethiopic-1.0.0.tbz font-misc-meltho-1.0.0_1.tbz font-util-1.0.1.tbz fontconfig-2.6.0,1.tbz freetype2-2.3.9_1.tbz gamin-0.1.10_3.tbz gconf2-2.26.2_1.tbz gdbm-1.8.3_3.tbz getopt-1.1.4_1.tbz gettext-0.17_1.tbz gio-fam-backend-2.20.5.tbz glib-2.20.5.tbz gnome-doc-utils-0.16.1_1.tbz gnome-icon-theme-2.26.0_2.tbz gnome-keyring-2.26.3_1.tbz gnome-mime-data-2. 18.0_3.tbz gnome-mount-0.8_3.tbz gnome-vfs-2.24.1_1.tbz gnome_subr-1.0.tbz gnomehier-2.3_12.tbz gnutls-2.8.3.tbz gtk-2.16.6.tbz gvfs-1.2.3_2.tbz hal-0.5.11_26.tbz hicolor-icon-theme-0.10_2.tbz inputproto-1.5.0.tbz iso8879-1986_2.tbz jasper-1.900.1_8.tbz jpeg-7.tbz kbproto-1.0.3.tbz libICE-1.0.4_1,1.tbz libIDL-0.8.13.tbz libSM-1.1.0_1,1.tbz libX11-1.2.1_1,1.tbz libXau-1.0.4.tbz libXcomposite-0.4.0,1.tbz libXcursor-1.1.9_1.tbz libXdamage-1.1.1.tbz libXdmcp-1.0.2_1.tbz libXext-1.0.5,1.tbz libXfixes-4.0.3_1.tbz libXft-2.1.13.tbz libXi-1.2.1,1.tbz libXinerama-1.0.3,1.tbz libXpm-3.5.7.tbz libXrandr-1.3.0.tbz libXrender-0.9.4_1.tbz libXt-1.0.5_1.tbz libart_lgpl-2.3.20,1.tbz libaudiofile-0.2.6_1.tbz libbonobo-2.24.1.tbz libbonoboui-2.24.1_1.tbz libcddb-1.3.0.tbz libcdio-0.78.2_2.tbz libdaemon-0.12.tbz libexif-0.6.17.tbz libfontenc-1.0.4.tbz libgcrypt-1.4.4.tbz libglade2-2.6.4_1.tbz libgnome-2.26.0_1.tbz libgnomecanvas-2.26.0_1.tbz libgnomeui-2.24.1_1.tbz libgpg-error-1.7.tbz libgpho to2-2.4.7.tbz libiconv-1.13.1.tbz libltdl-2.2.6a.tbz libnoti! fy-0.4.5_1.tbz libproxy-0.2.3.tbz libpthread-stubs-0.1.tbz libsoup-2.26.3_2.tbz libtasn1-2.3.tbz libusb-0.1.12_4.tbz libvolume_id-0.81.1.tbz libxcb-1.4.tbz libxml2-2.7.4_1.tbz libxslt-1.1.24_2.tbz mkfontdir-1.0.4.tbz mkfontscale-1.0.6.tbz pango-1.24.5.tbz pciids-20090807.tbz pcre-7.9.tbz perl-5.8.9_3.tbz pixman-0.15.4.tbz pkg-config-0.23_1.tbz png-1.2.40.tbz policykit-0.9_5.tbz policykit-gnome-0.9.2_2.tbz popt-1.14.tbz py26-libxml2-2.7.4.tbz python26-2.6.2_3.tbz randrproto-1.3.0.tbz rarian-0.8.1.tbz renderproto-0.9.3.tbz samba-libsmbclient-3.0.36.tbz shared-mime-info-0.60_1.tbz sqlite3-3.6.14.2.tbz startup-notification-0.10.tbz tiff-3.9.1.tbz xcb-proto-1.5.tbz xcb-util-0.3.6.tbz xextproto-7.0.5.tbz xineramaproto-1.1.2.tbz xmlcatmgr-2.2.tbz xmlcharent-0.3_2.tbz xorg-fonts-truetype-7.4.tbz xproto-7.0.15.tbz prefixes: LOCALBASE=usr/local X11BASE=usr/local add_pkg ================================================================ ======================================== => gnome-pkgview-1.0.7.tar.bz2 doesn't seem to exist in /tmp/distfiles/. => Attempting to fetch from http://www.mikegtn.net/packages/gnome-pkgview/. fetch: http://www.mikegtn.net/packages/gnome-pkgview/gnome-pkgview-1.0.7.tar.bz2: No route to host => Attempting to fetch from ftp://pointyhat.freebsd.org/pub/FreeBSD/distfiles/. fetch: ftp://pointyhat.freebsd.org/pub/FreeBSD/distfiles/gnome-pkgview-1.0.7.tar.bz2: File unavailable (e.g., file not found, no access) => Couldn't fetch it - please try to retrieve this => port manually into /tmp/distfiles/ and try again. *** Error code 1 Stop in /a/ports/sysutils/gnome-pkgview. ================================================================ build of /usr/ports/sysutils/gnome-pkgview ended at Sat Sep 19 17:39:25 UTC 2009 - ----- End forwarded message ----- - -- +-----------------------+-------------------------------+ | PGP : 0xB1E6FCE9 | Jabber : miwi(at)BSDCrew.de | | Skype : splash_111 | Mail : miwi(at)FreeBSD.org | +-----------------------+-------------------------------+ | Mess with the Best, Die like the Rest! | +-----------------------+-------------------------------+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkq1GfoACgkQdLJIhLHm/OnOoACdHxE+V7M8bD5Cfecmaxe+sLGt 50EAoJ7DXVqx2gweio4fQz6cfxFkmuc6 =zM/c -----END PGP SIGNATURE----- From hg at queue.to Sat Sep 19 18:48:49 2009 From: hg at queue.to (Howard Goldstein) Date: Sat Sep 19 18:48:56 2009 Subject: Which GECKO for www/galeon? In-Reply-To: References: <4AB4EC4D.1000607@queue.to> Message-ID: <4AB5278F.9030904@queue.to> Jeremy Messenger wrote: > On Sat, 19 Sep 2009 09:35:57 -0500, Howard Goldstein wrote: > >> What is the preferred GECKO for www/galeon? libxul doesn't seem to be >> an option > > In the Makefile has: > > DEPRECATED= requires legacy Gecko; switch to www/epiphany instead > > The legacy Gecko has many security issues, so Galeon must be port to > libxul or it is going to be removed. If I were you, I would move on to > the different browser because Galeon is not great at keep up to date > from the upstream. I wasn't sure if I had to have galeon to persuade nautilus to generate thumbnails for local .html content. I absolutely don't need galeon (and it doesn't do anything for nautilus and .html thumbnails) or the headache of the legacy gecko. Thank you for pointing me the right way, and for your kindness, too. Best Regards, Howard -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 251 bytes Desc: OpenPGP digital signature Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090919/650758f7/signature.pgp From turutani at scphys.kyoto-u.ac.jp Sun Sep 20 01:40:43 2009 From: turutani at scphys.kyoto-u.ac.jp (Tsurutani Naoki) Date: Sun Sep 20 01:40:50 2009 Subject: ports/138933: building x11/xscreensaver-gnome fails In-Reply-To: <200909191651.n8JGpo9w001413@freefall.freebsd.org> References: <200909191651.n8JGpo9w001413@freefall.freebsd.org> Message-ID: <200909200140.AA01130@POLYMER5.scphys.kyoto-u.ac.jp> I think it should be buildable with lesser optimization flag. --- Tsurutani Naoki turutani@scphys.kyoto-u.ac.jp From barbara.xxx1975 at libero.it Sun Sep 20 16:21:01 2009 From: barbara.xxx1975 at libero.it (barbara) Date: Sun Sep 20 16:21:49 2009 Subject: x11-toolkits/py-gnome-extras: PKGNAMESUFFIX usage Message-ID: > For curiosity, can someone comment/explain me about the usage of PKGNAMESUFFIX in x11-toolkits/py-gnome-extras? > My curiosity is originated by a problem I noticed with a "non-gnome" port. Refer to the following two messages I've posted in the freebsd-ports mailing list: > http://lists.freebsd.org/pipermail/freebsd-ports/2009-September/057098.html > http://lists.freebsd.org/pipermail/freebsd-ports/2009-September/057103.html > Anyone? From orca at tdlsoftware.org Sun Sep 20 22:04:34 2009 From: orca at tdlsoftware.org (Peter Laursen) Date: Sun Sep 20 22:04:40 2009 Subject: Accessibility questions Message-ID: <28622.93.166.254.86.1253484146.squirrel@tdlsoftware.org> Hi, I have various questions about Gnome and accessibility - I have unsuccessfully tried finding these ansers myself. I hope, therefore, that someone on this list has the answers. A short background: I am to give a short presentation on Open-source and accessibility to some people who counsel blind people in what software they need to choose. Currently, their only choice is Windows. FreeBSD has shown to be the best platform for Gnome in this respect, especially because of its clear and simple setup and crystal-clear audio. Here, then, follows the questions: 1) On various Linux distributions, an audio file is played when the machine is ready for login. Where does one set this up on FreeBSD? In gdm.conf or in a completely separate place? 2) When one installs x11/gnome2, gnome-speech is also built. However, due to gnome-speech's detecting installed speech synthesizers on build-time, it would be wise to include a configuration section in the port makefile, allowing a user to choose what speech synthesizer the person would use. I would like to help with integrating this change if possible. I realise that few people would need this. 3) When one builds Gnome from ports, Firefox 3 is unable to communicate with the Gnome screen reader. If one chooses the Gnome that is built from packages (e.g. pkg_add -r gnome2) and then runs portupgrade -a and installs Firefox 3, Firefox 3 and Orca are able to communicate, meaning that visually impaired people are able to browse the net from FreeBSD. What Gecko engine is used when Gnome is built for distribution with the various FreeBSD versions? My own test machine uses FreeBSD 8.0 Beta 4. It's an I386-install of FreeBSD. I look forward to hearing from anyone who may have some of the answers to the above questions. Regards, Peter. From marcus at marcuscom.com Sun Sep 20 22:21:54 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Sun Sep 20 22:22:01 2009 Subject: Accessibility questions In-Reply-To: <28622.93.166.254.86.1253484146.squirrel@tdlsoftware.org> References: <28622.93.166.254.86.1253484146.squirrel@tdlsoftware.org> Message-ID: <1253485322.38842.174.camel@shumai.marcuscom.com> On Mon, 2009-09-21 at 00:02 +0200, Peter Laursen wrote: > Hi, > > I have various questions about Gnome and accessibility - I have > unsuccessfully tried finding these ansers myself. I hope, therefore, that > someone on this list has the answers. While I recognize the importance of a11y, I am not knowledgeable on the topic at all. I'm not sure if you're going to find all the answers here. Speaking for myself, when I was porting apps like orca, gnome-speech, and dasher, I simply made sure they compiled, and did very limited run-time testing. I would certainly welcome an a11y expert to contribute to FreeBSD GNOME. > > A short background: I am to give a short presentation on Open-source and > accessibility to some people who counsel blind people in what software > they need to choose. Currently, their only choice is Windows. FreeBSD has > shown to be the best platform for Gnome in this respect, especially > because of its clear and simple setup and crystal-clear audio. > > Here, then, follows the questions: > > 1) On various Linux distributions, an audio file is played when the > machine is ready for login. Where does one set this up on FreeBSD? In > gdm.conf or in a completely separate place? That sound right. I do know GDM does have some a11y integration points, but I'm not sure how one would setup a ready-to-login sound. > > 2) When one installs x11/gnome2, gnome-speech is also built. However, due > to gnome-speech's detecting installed speech synthesizers on build-time, > it would be wise to include a configuration section in the port makefile, > allowing a user to choose what speech synthesizer the person would use. I > would like to help with integrating this change if possible. I realise > that few people would need this. Sure, patches are welcome. If you can create something you feel comfortable with, I'd be happy to commit your work. > > 3) When one builds Gnome from ports, Firefox 3 is unable to communicate > with the Gnome screen reader. If one chooses the Gnome that is built from > packages (e.g. pkg_add -r gnome2) and then runs portupgrade -a and > installs Firefox 3, Firefox 3 and Orca are able to communicate, meaning > that visually impaired people are able to browse the net from FreeBSD. > What Gecko engine is used when Gnome is built for distribution with the > various FreeBSD versions? Up until very recently, GNOME components used www/firefox (i.e. FF 2.0) for Gecko. Now they use libxul (i.e. the same Gecko version used by FF 3.0.x). In GNOME 2.28, epiphany will use WebKit, but yelp will still be libxul-based. Hearing that the ports FF 3.0 doesn't work with orca while the package version does is very confusing. If anything, I'd expect the opposite. You might try resyncing the ports tree, then remove www/firefox, run portupgrade -a to upgrade ports like yelp and ephy, then rebuild firefox3. Joe > > My own test machine uses FreeBSD 8.0 Beta 4. It's an I386-install of FreeBSD. > > I look forward to hearing from anyone who may have some of the answers to > the above questions. > > Regards, > > Peter. > > > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090920/0be95f64/attachment.pgp From marcus at marcuscom.com Sun Sep 20 22:25:37 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Sun Sep 20 22:25:43 2009 Subject: x11-toolkits/py-gnome-extras: PKGNAMESUFFIX usage In-Reply-To: References: Message-ID: <1253485538.38842.175.camel@shumai.marcuscom.com> On Sat, 2009-09-19 at 19:00 +0200, barbara wrote: > For curiosity, can someone comment/explain me about the usage of PKGNAMESUFFIX in x11-toolkits/py-gnome-extras? > My curiosity is originated by a problem I noticed with a "non-gnome" port. Refer to the following two messages I've posted in the freebsd-ports mailing list: > http://lists.freebsd.org/pipermail/freebsd-ports/2009-September/057098.html > http://lists.freebsd.org/pipermail/freebsd-ports/2009-September/057103.html I think this comes from an archaic limitation that port names should not contain '-'. It could probably be merged into the PORTNAME now. Joe -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090920/ad419956/attachment.pgp From orca at tdlsoftware.org Sun Sep 20 22:31:32 2009 From: orca at tdlsoftware.org (Peter Laursen) Date: Sun Sep 20 22:31:38 2009 Subject: Accessibility questions In-Reply-To: <1253485322.38842.174.camel@shumai.marcuscom.com> References: <28622.93.166.254.86.1253484146.squirrel@tdlsoftware.org> <1253485322.38842.174.camel@shumai.marcuscom.com> Message-ID: <49603.93.166.254.86.1253485764.squirrel@tdlsoftware.org> Hi Joe, Thank you very much for your answers, they were just what I was looking for. I cannot explain why Firefox 3 doesn't work from ports when it works from packages. But since libxul is built using a Firefox 3.0.X gecko engine, this explains why Orca and Firefox 3 are able to communicate. If I was to re-build Gnome from ports, is there any way that I can make sure that libxul is used as the only gecko engine? Again, thank you for the answers you have provided so far. Regards, eter. > On Mon, 2009-09-21 at 00:02 +0200, Peter Laursen wrote: >> Hi, >> >> I have various questions about Gnome and accessibility - I have >> unsuccessfully tried finding these ansers myself. I hope, therefore, >> that >> someone on this list has the answers. > > While I recognize the importance of a11y, I am not knowledgeable on the > topic at all. I'm not sure if you're going to find all the answers > here. Speaking for myself, when I was porting apps like orca, > gnome-speech, and dasher, I simply made sure they compiled, and did very > limited run-time testing. I would certainly welcome an a11y expert to > contribute to FreeBSD GNOME. > >> >> A short background: I am to give a short presentation on Open-source and >> accessibility to some people who counsel blind people in what software >> they need to choose. Currently, their only choice is Windows. FreeBSD >> has >> shown to be the best platform for Gnome in this respect, especially >> because of its clear and simple setup and crystal-clear audio. >> >> Here, then, follows the questions: >> >> 1) On various Linux distributions, an audio file is played when the >> machine is ready for login. Where does one set this up on FreeBSD? In >> gdm.conf or in a completely separate place? > > That sound right. I do know GDM does have some a11y integration points, > but I'm not sure how one would setup a ready-to-login sound. > >> >> 2) When one installs x11/gnome2, gnome-speech is also built. However, >> due >> to gnome-speech's detecting installed speech synthesizers on build-time, >> it would be wise to include a configuration section in the port >> makefile, >> allowing a user to choose what speech synthesizer the person would use. >> I >> would like to help with integrating this change if possible. I realise >> that few people would need this. > > Sure, patches are welcome. If you can create something you feel > comfortable with, I'd be happy to commit your work. > >> >> 3) When one builds Gnome from ports, Firefox 3 is unable to communicate >> with the Gnome screen reader. If one chooses the Gnome that is built >> from >> packages (e.g. pkg_add -r gnome2) and then runs portupgrade -a and >> installs Firefox 3, Firefox 3 and Orca are able to communicate, meaning >> that visually impaired people are able to browse the net from FreeBSD. >> What Gecko engine is used when Gnome is built for distribution with the >> various FreeBSD versions? > > Up until very recently, GNOME components used www/firefox (i.e. FF 2.0) > for Gecko. Now they use libxul (i.e. the same Gecko version used by FF > 3.0.x). In GNOME 2.28, epiphany will use WebKit, but yelp will still be > libxul-based. > > Hearing that the ports FF 3.0 doesn't work with orca while the package > version does is very confusing. If anything, I'd expect the opposite. > You might try resyncing the ports tree, then remove www/firefox, run > portupgrade -a to upgrade ports like yelp and ephy, then rebuild > firefox3. > > Joe > >> >> My own test machine uses FreeBSD 8.0 Beta 4. It's an I386-install of >> FreeBSD. >> >> I look forward to hearing from anyone who may have some of the answers >> to >> the above questions. >> >> Regards, >> >> Peter. >> >> >> _______________________________________________ >> freebsd-gnome@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome >> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" >> > -- > PGP Key : http://www.marcuscom.com/pgp.asc > From marcus at marcuscom.com Sun Sep 20 23:42:20 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Sun Sep 20 23:42:27 2009 Subject: Accessibility questions In-Reply-To: <49603.93.166.254.86.1253485764.squirrel@tdlsoftware.org> References: <28622.93.166.254.86.1253484146.squirrel@tdlsoftware.org> <1253485322.38842.174.camel@shumai.marcuscom.com> <49603.93.166.254.86.1253485764.squirrel@tdlsoftware.org> Message-ID: <1253490147.38842.189.camel@shumai.marcuscom.com> On Mon, 2009-09-21 at 00:29 +0200, Peter Laursen wrote: > Hi Joe, > > Thank you very much for your answers, they were just what I was looking for. > > I cannot explain why Firefox 3 doesn't work from ports when it works from > packages. But since libxul is built using a Firefox 3.0.X gecko engine, > this explains why Orca and Firefox 3 are able to communicate. > > If I was to re-build Gnome from ports, is there any way that I can make > sure that libxul is used as the only gecko engine? Add the following to /etc/make.conf: WITH_GECKO=libxul This will be moot when GNOME 2.28 is released as libxul will be the only allowable option for GNOME. Joe > > Again, thank you for the answers you have provided so far. > > Regards, > > eter. > > > On Mon, 2009-09-21 at 00:02 +0200, Peter Laursen wrote: > >> Hi, > >> > >> I have various questions about Gnome and accessibility - I have > >> unsuccessfully tried finding these ansers myself. I hope, therefore, > >> that > >> someone on this list has the answers. > > > > While I recognize the importance of a11y, I am not knowledgeable on the > > topic at all. I'm not sure if you're going to find all the answers > > here. Speaking for myself, when I was porting apps like orca, > > gnome-speech, and dasher, I simply made sure they compiled, and did very > > limited run-time testing. I would certainly welcome an a11y expert to > > contribute to FreeBSD GNOME. > > > >> > >> A short background: I am to give a short presentation on Open-source and > >> accessibility to some people who counsel blind people in what software > >> they need to choose. Currently, their only choice is Windows. FreeBSD > >> has > >> shown to be the best platform for Gnome in this respect, especially > >> because of its clear and simple setup and crystal-clear audio. > >> > >> Here, then, follows the questions: > >> > >> 1) On various Linux distributions, an audio file is played when the > >> machine is ready for login. Where does one set this up on FreeBSD? In > >> gdm.conf or in a completely separate place? > > > > That sound right. I do know GDM does have some a11y integration points, > > but I'm not sure how one would setup a ready-to-login sound. > > > >> > >> 2) When one installs x11/gnome2, gnome-speech is also built. However, > >> due > >> to gnome-speech's detecting installed speech synthesizers on build-time, > >> it would be wise to include a configuration section in the port > >> makefile, > >> allowing a user to choose what speech synthesizer the person would use. > >> I > >> would like to help with integrating this change if possible. I realise > >> that few people would need this. > > > > Sure, patches are welcome. If you can create something you feel > > comfortable with, I'd be happy to commit your work. > > > >> > >> 3) When one builds Gnome from ports, Firefox 3 is unable to communicate > >> with the Gnome screen reader. If one chooses the Gnome that is built > >> from > >> packages (e.g. pkg_add -r gnome2) and then runs portupgrade -a and > >> installs Firefox 3, Firefox 3 and Orca are able to communicate, meaning > >> that visually impaired people are able to browse the net from FreeBSD. > >> What Gecko engine is used when Gnome is built for distribution with the > >> various FreeBSD versions? > > > > Up until very recently, GNOME components used www/firefox (i.e. FF 2.0) > > for Gecko. Now they use libxul (i.e. the same Gecko version used by FF > > 3.0.x). In GNOME 2.28, epiphany will use WebKit, but yelp will still be > > libxul-based. > > > > Hearing that the ports FF 3.0 doesn't work with orca while the package > > version does is very confusing. If anything, I'd expect the opposite. > > You might try resyncing the ports tree, then remove www/firefox, run > > portupgrade -a to upgrade ports like yelp and ephy, then rebuild > > firefox3. > > > > Joe > > > >> > >> My own test machine uses FreeBSD 8.0 Beta 4. It's an I386-install of > >> FreeBSD. > >> > >> I look forward to hearing from anyone who may have some of the answers > >> to > >> the above questions. > >> > >> Regards, > >> > >> Peter. > >> > >> > >> _______________________________________________ > >> freebsd-gnome@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > >> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > >> > > -- > > PGP Key : http://www.marcuscom.com/pgp.asc > > > > > -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090920/304c9d7c/attachment.pgp From linimon at FreeBSD.org Mon Sep 21 06:28:14 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Mon Sep 21 06:28:21 2009 Subject: FreeBSD ports that you maintain which are currently marked broken Message-ID: <20090921062813.59EDE1CCCD@mail.droso.net> Dear FreeBSD port maintainer: As part of an ongoing effort to reduce the number of problems in the FreeBSD ports system, we periodically notify users of ports that are marked as "broken" in their Makefiles. In many cases these ports are failing to compile on some subset of the FreeBSD build environments. The most common problem is that recent versions of -CURRENT include gcc4.2, which is much stricter than older versions. The next most common problem is that compiles succeed on the i386 architecture (e.g. the common Intel PC), but fail on one or more of the other architectures due to assumptions about things such as size of various types, byte-alignment issues, and so forth. In occasional cases we see that the same port may have different errors in different build environments. The script that runs on the build cluster uses heuristics to try to 'guess' the error type to help you isolate problems, but it is only a rough guide. One more note: on occasion, there are transient build errors seen on the build farm. Unfortunately, there is not yet any way for this algorithm to tell the difference (humans are much, much better at this kind of thing.) The errors are listed below. In the case where the same problem exists on more than one build environment, the URL points to the latest errorlog for that type. (By 'build environment' here we mean 'combination of 6.x/7.x/-current with target architecture'.) (Note: the dates are included to help you to gauge whether or not the error still applies to the latest version. The program that generates this report is not yet able to determine this automatically.) portname: databases/libgda4-jdbc broken because: does not configure build errors: none. overview: http://portsmon.FreeBSD.org/portoverview.py?category=databases&portname=libgda4-jdbc If these errors are ones that you are already aware of, please accept our apologies and ignore this message. On the other hand, if you no longer wish to maintain this port (or ports), please reply with a message stating that, and accept our thanks for your efforts in the past. Every effort has been made to make sure that these error reports really do correspond to a port that you maintain. However, due to the fact that this is an automated process, it may indeed generate false matches. If one of these errors fits that description, please forward this email to the author of this software, Mark Linimon , so that he can attempt to fix the problem in the future. Thanks for your efforts to help improve FreeBSD. From bu7cher at yandex.ru Mon Sep 21 10:55:34 2009 From: bu7cher at yandex.ru (Andrey V. Elsukov) Date: Mon Sep 21 10:55:40 2009 Subject: gnome-commander glib error Message-ID: <4AB7569A.1030200@yandex.ru> Hi, Marco Beishuizen >After upgrading gnome-commander to 1.2.8, it core dumps with the following >error: >... >GLib-ERROR **: gmem.c:156: failed to allocate 4294967295 bytes >aborting... >Abort trap (core dumped) >... I have the same problem, did you find any solutions? My system is 9.0-CURRENT-amd64 with 2G RAM. I got an error: GLib-ERROR **: gmem.c:156: failed to allocate 18446744073709551615 bytes aborting... -- WBR, Andrey V. Elsukov From bugmaster at FreeBSD.org Mon Sep 21 11:07:21 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Sep 21 11:10:12 2009 Subject: Current problem reports assigned to gnome@FreeBSD.org Message-ID: <200909211107.n8LB7Klm030633@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- a ports/138872 gnome www/epiphany doesn't work when WITH_GECKO=libxul o ports/138861 gnome sysutils/policykit depends on optional component for d f ports/137368 gnome x11-toolkits/libwnck: add menu option to configure dep s ports/137367 gnome net/libproxy: add menu option to configure dependence s ports/136967 gnome security/seahorse-plugins 2.26.2_1 + GPG = fail p ports/136676 gnome x11/gnome2: hald/GNOME (I guess) (re) mounted /usr and f ports/136435 gnome security/gnome-keyring + hald prevents umount of usb d p ports/134737 gnome Update www/webkit-gtk2 to 1.1.7 f ports/134536 gnome [patch] graphics/gimp: Gimp 2.6.6 fails to open URI's o ports/134509 gnome graphics/inkscape: after loading any type of data file a ports/134361 gnome devel/gvfs ports with smbclient support doesn't pass a f ports/134358 gnome x11/gnome2: trackerd uses up all of the cpu o ports/132304 gnome ports/devel/dbus misses /var/db/dbus/machine-id in dis 13 problems total. From bu7cher at yandex.ru Mon Sep 21 11:43:36 2009 From: bu7cher at yandex.ru (Andrey V. Elsukov) Date: Mon Sep 21 11:43:45 2009 Subject: gnome-commander glib error In-Reply-To: <4AB7569A.1030200@yandex.ru> References: <4AB7569A.1030200@yandex.ru> Message-ID: <4AB766E2.6000009@yandex.ru> Andrey V. Elsukov wrote: > I have the same problem, did you find any solutions? > My system is 9.0-CURRENT-amd64 with 2G RAM. > I got an error: > > GLib-ERROR **: gmem.c:156: failed to allocate 18446744073709551615 bytes > aborting... So, I rebuild it with DEBUG_FLAGS=-g and found that it crashes in GnomeCmdOwner constructor. After that i found this fix: http://mail.gnome.org/archives/svn-commits-list/2009-August/msg02622.html Also I found that it already fixed and i just should update my ports :) http://www.freebsd.org/cgi/query-pr.cgi?pr=137684 Sorry for th noise. :) -- WBR, Andrey V. Elsukov From linimon at FreeBSD.org Tue Sep 22 04:15:16 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Tue Sep 22 04:15:27 2009 Subject: ports/139038: gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 Message-ID: <200909220415.n8M4FFw2076313@freefall.freebsd.org> Old Synopsis: Clock applet no longer shows weather information on FreeBSD 8.0 New Synopsis: gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: linimon Responsible-Changed-When: Tue Sep 22 04:14:41 UTC 2009 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=139038 From vova at parallels.com Tue Sep 22 07:08:08 2009 From: vova at parallels.com (Vladimir Grebenschikov) Date: Tue Sep 22 07:08:15 2009 Subject: Missed dependancy audio/gnome-media -> database/tdb Message-ID: <1253602169.1655.22.camel@localhost> Hi # cd /usr/ports/audio/gnome-media # make ... Making all in src gmake[3]: Entering directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control/src' gmake all-am gmake[4]: Entering directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control/src' /bin/sh ../../libtool --tag=CC --mode=link cc -O2 -pipe -fno-strict-aliasing -L/usr/local/lib -o gnome-volume-control-applet gvc-mixer-stream.o gvc-channel-map.o gvc-mixer-sink.o gvc-mixer-source.o gvc-mixer-sink-input.o gvc-mixer-source-output.o gvc-mixer-event-role.o gvc-mixer-control.o gvc-channel-bar.o gvc-stream-status-icon.o gvc-applet.o gvc-log.o applet-main.o -pthread -L/usr/local/lib -lgconf-2 -lcanberra-gtk -lcanberra -lunique-1.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lgio-2.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lpangoft2-1.0 -lXfixes -lcairo -lX11 -lpango-1.0 -lm -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lxml2 -pthread -L/usr/local/lib -lpulse-mainloop-glib -lpulse -lglib-2.0 libtool: link: cc -O2 -pipe -fno-strict-aliasing -o gnome-volume-control-applet gvc-mixer-stream.o gvc-channel-map.o gvc-mixer-sink.o gvc-mixer-source.o gvc-mixer-sink-input.o gvc-mixer-source-output.o gvc-mixer-event-role.o gvc-mixer-control.o gvc-channel-bar.o gvc-stream-status-icon.o gvc-applet.o gvc-log.o applet-main.o -pthread -pthread -L/usr/local/lib /usr/local/lib/libgconf-2.so /usr/local/lib/libORBit-2.so /usr/local/lib/libcanberra-gtk.so /usr/local/lib/libgthread-2.0.so /usr/local/lib/libcanberra.so /usr/local/lib/libvorbisfile.so /usr/local/lib/libvorbis.so /usr/local/lib/libogg.so -ltdb /usr/local/lib/libltdl.so /usr/local/lib/libunique-1.0.so /usr/local/lib/libdbus-glib-1.so /usr/local/lib/libdbus-1.so /usr/local/lib/libgtk-x11-2.0.so /usr/local/lib/libgdk-x11-2.0.so /usr/local/lib/libatk-1.0.so /usr/local/lib/libgdk_pixbuf-2.0.so /usr/local/lib/libpangocairo-1.0.so /usr/local/lib/libgio-2.0.so /usr/local/lib/libXinerama.so /usr/local/lib/libXi.so /usr/local/lib/libXrandr.so /usr/local/lib/libXcursor.so /usr/local/lib/libXcomposite.so /usr/local/lib/libXext.so /usr/local/lib/libXdamage.so /usr/local/lib/libpangoft2-1.0.so /usr/local/lib/libXfixes.so /usr/local/lib/libcairo.so /usr/local/lib/libpixman-1.so -lpng /usr/local/lib/libxcb-render-util.so /usr/local/lib/libxcb-render.so /usr/local/lib/libXrender.so /usr/local/lib/libpango-1.0.so /usr/local/lib/libfontconfig.so /usr/local/lib/libfreetype.so /usr/local/lib/libexpat.so /usr/local/lib/libgobject-2.0.so /usr/local/lib/libgmodule-2.0.so /usr/local/lib/libxml2.so -lz /usr/local/lib/libpulse-mainloop-glib.so /usr/local/lib/libpulse.so /usr/local/lib/libSM.so /usr/local/lib/libICE.so /usr/local/lib/libX11.so /usr/local/lib/libxcb.so /usr/local/lib/libXau.so /usr/local/lib/libXdmcp.so -lrpcsvc /usr/local/lib/libgdbm.so -lrt -lm /usr/local/lib/libglib-2.0.so /usr/local/lib/libintl.so /usr/local/lib/libiconv.so /usr/local/lib/libpcre.so -pthread -Wl,-rpath -Wl,/usr/local/lib -Wl,-rpath -Wl,/usr/local/lib /usr/bin/ld: cannot find -ltdb gmake[4]: *** [gnome-volume-control-applet] ?????? 1 gmake[4]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control/src' gmake[3]: *** [all] ?????? 2 gmake[3]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control/src' gmake[2]: *** [all-recursive] ?????? 1 gmake[2]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control' gmake[1]: *** [all-recursive] ?????? 1 gmake[1]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0' gmake: *** [all] ?????? 2 *** Error code 1 Stop in /usr/ports/audio/gnome-media. *** Error code 1 Stop in /usr/ports/audio/gnome-media. # grep tdb work/gnome-media-2.26.0/config.log # After installing database/tdb it builds and install successfully. I have un-installed tdb before due to conflict with samba3* (looks like samba installs some of tdb files but not all required). What is the clue to use correctly gnome-media + samba ? -- Vladimir B. Grebenschikov Project Manager, Automation Parallels Inc. vgrebenschikov@parallels.com From kwm at rainbow-runner.nl Tue Sep 22 08:22:43 2009 From: kwm at rainbow-runner.nl (Koop Mast) Date: Tue Sep 22 08:22:49 2009 Subject: Missed dependancy audio/gnome-media -> database/tdb In-Reply-To: <1253602169.1655.22.camel@localhost> References: <1253602169.1655.22.camel@localhost> Message-ID: <1253606767.2148.2.camel@headache.rainbow-runner.nl> On Tue, 2009-09-22 at 10:49 +0400, Vladimir Grebenschikov wrote: > > I have un-installed tdb before due to conflict with samba3* (looks > like samba installs some of tdb files but not all required). > What is the clue to use correctly gnome-media + samba ? Can you delete tdb, rebuild pulseaudio and then gnome-media? Unless something new shows up that should fix it. -Koop From vova at fbsd.ru Wed Sep 23 16:01:31 2009 From: vova at fbsd.ru (Vladimir Grebenschikov) Date: Wed Sep 23 16:01:37 2009 Subject: Missed dependancy audio/gnome-media -> database/tdb In-Reply-To: <1253606767.2148.2.camel@headache.rainbow-runner.nl> References: <1253602169.1655.22.camel@localhost> <1253606767.2148.2.camel@headache.rainbow-runner.nl> Message-ID: <1253721683.2225.3.camel@localhost> Hi > On Tue, 2009-09-22 at 10:49 +0400, Vladimir Grebenschikov wrote: > > > > I have un-installed tdb before due to conflict with samba3* (looks > > like samba installs some of tdb files but not all required). > > What is the clue to use correctly gnome-media + samba ? > > Can you delete tdb, rebuild pulseaudio and then gnome-media? Unless > something new shows up that should fix it. Same effect after removal tdb and install pulseaudio (it was not installed). libtool: link: cc -O2 -pipe -fno-strict-aliasing -o gnome-volume-control-applet gvc-mixer-stream.o gvc-channel-map.o gvc-mixer-sink.o gvc-mixer-source.o gvc-mixer-sink-input.o gvc-mixer-source-output.o gvc-mixer-event-role.o gvc-mixer-control.o gvc-channel-bar.o gvc-stream-status-icon.o gvc-applet.o gvc-log.o applet-main.o -pthread -pthread -L/usr/local/lib /usr/local/lib/libgconf-2.so /usr/local/lib/libORBit-2.so /usr/local/lib/libcanberra-gtk.so /usr/local/lib/libgthread-2.0.so /usr/local/lib/libcanberra.so /usr/local/lib/libvorbisfile.so -ltdb /usr/local/lib/libltdl.so /usr/local/lib/libunique-1.0.so /usr/local/lib/libdbus-glib-1.so /usr/local/lib/libgtk-x11-2.0.so /usr/local/lib/libgdk-x11-2.0.so /usr/local/lib/libatk-1.0.so /usr/local/lib/libgdk_pixbuf-2.0.so /usr/local/lib/libpangocairo-1.0.so /usr/local/lib/libgio-2.0.so /usr/local/lib/libXinerama.so /usr/local/lib/libXi.so /usr/local/lib/libXrandr.so /usr/local/lib/libXcursor.so /usr/local/lib/libXcomposite.so /usr/local/lib/libXdamage.so /usr/local/lib/libpangoft2-1.0.so /usr/local/lib/libXfixes.so /usr/local/lib/libcairo.so /usr/local/lib/libpixman-1.so -lpng /usr/local/lib/libxcb-render-util.so /usr/local/lib/libxcb-render.so /usr/local/lib/libXrender.so /usr/local/lib/libpango-1.0.so /usr/local/lib/libfontconfig.so /usr/local/lib/libfreetype.so /usr/local/lib/libexpat.so /usr/local/lib/libgobject-2.0.so /usr/local/lib/libgmodule-2.0.so /usr/local/lib/libxml2.so -lz /usr/local/lib/libpulse-mainloop-glib.so /usr/local/lib/libpulse.so /usr/local/lib/libpulsecommon-0.9.18.so /usr/local/lib/libSM.so /usr/local/lib/libICE.so /usr/local/lib/libXtst.so /usr/local/lib/libXext.so /usr/local/lib/libX11.so /usr/local/lib/libxcb.so /usr/local/lib/libXdmcp.so -lrpcsvc /usr/local/lib/libXau.so -lwrap /usr/local/lib/libsndfile.so /usr/local/lib/libFLAC.so /usr/local/lib/libvorbisenc.so /usr/local/lib/libvorbis.so /usr/local/lib/libogg.so /usr/local/lib/libdbus-1.so /usr/local/lib/libgdbm.so -lexecinfo -lrt -lm /usr/local/lib/libglib-2.0.so /usr/local/lib/libintl.so /usr/local/lib/libiconv.so /usr/local/lib/libpcre.so -pthread -Wl,-rpath -Wl,/usr/local/lib -Wl,-rpath -Wl,/usr/local/lib /usr/bin/ld: cannot find -ltdb gmake[4]: *** [gnome-volume-control-applet] ?????? 1 gmake[4]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control/src' gmake[3]: *** [all] ?????? 2 gmake[3]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control/src' gmake[2]: *** [all-recursive] ?????? 1 gmake[2]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0/gnome-volume-control' gmake[1]: *** [all-recursive] ?????? 1 gmake[1]: Leaving directory `/usr/ports/audio/gnome-media/work/gnome-media-2.26.0' gmake: *** [all] ?????? 2 > -Koop -- Vladimir B. Grebenschikov vova@fbsd.ru From Alexey.Chuprinin at emerson.com Wed Sep 23 19:07:53 2009 From: Alexey.Chuprinin at emerson.com (Alexey.Chuprinin@emerson.com) Date: Wed Sep 23 19:08:00 2009 Subject: GNOME2 building error on seahorse-plugins Message-ID: Hi, I will greatly appreciate your help on the following issue. I'm trying to build GNOME2 from ports collection. I have freshly FreeBSD-7.2 installed on my notebook. I updated ports with cvsup yesterday (Sep. 22, 2009) with "tag=.". I have firefox-3.5.3,1 installed. Here is building log: ===> Vulnerability check disabled, database not found ===> Found saved configuration for gnome2-2.26.3 ===> Extracting for gnome2-2.26.3 ===> Patching for gnome2-2.26.3 ===> gnome2-2.26.3 depends on file: /usr/local/bin/python2.6 - found ===> Configuring for gnome2-2.26.3 ===> Installing for gnome2-2.26.3 ===> gnome2-2.26.3 depends on file: /usr/local/libexec/gweather-applet-2 - found ===> gnome2-2.26.3 depends on executable: gnome-audio-profiles-properties - found ===> gnome2-2.26.3 depends on executable: gnome-dictionary - found ===> gnome2-2.26.3 depends on executable: eog - found ===> gnome2-2.26.3 depends on executable: gconf-editor - found ===> gnome2-2.26.3 depends on executable: gnect - found ===> gnome2-2.26.3 depends on executable: gedit - found ===> gnome2-2.26.3 depends on executable: gnome-terminal - found ===> gnome2-2.26.3 depends on executable: gnome-session - found ===> gnome2-2.26.3 depends on executable: bug-buddy - found ===> gnome2-2.26.3 depends on executable: gnome-system-monitor - found ===> gnome2-2.26.3 depends on executable: nautilus - found ===> gnome2-2.26.3 depends on file: /usr/local/sbin/gdm - found ===> gnome2-2.26.3 depends on file: /usr/local/share/gnome/help/user-guide/C/user-guide.xml - found ===> gnome2-2.26.3 depends on file: /usr/local/share/sounds/question.wav - found ===> gnome2-2.26.3 depends on file: /usr/local/libdata/pkgconfig/libgail-gnome.pc - found ===> gnome2-2.26.3 depends on executable: file-roller - found ===> gnome2-2.26.3 depends on file: /usr/local/share/themes/HighContrast/gtk-2.0/gtkrc - found ===> gnome2-2.26.3 depends on executable: gok - found ===> gnome2-2.26.3 depends on executable: gcalctool - found ===> gnome2-2.26.3 depends on file: /usr/local/lib/X11/fonts/bitstream-vera/Vera.ttf - found ===> gnome2-2.26.3 depends on file: /usr/local/libexec/gnome-netstatus-applet - found ===> gnome2-2.26.3 depends on executable: dasher - found ===> gnome2-2.26.3 depends on executable: evolution - found ===> gnome2-2.26.3 depends on file: /usr/local/libexec/evolution-webcal - found ===> gnome2-2.26.3 depends on executable: network-admin - found ===> gnome2-2.26.3 depends on executable: vino-passwd - found ===> gnome2-2.26.3 depends on executable: exchange-connector-setup-2.26 - found ===> gnome2-2.26.3 depends on file: /usr/local/lib/gstreamer-0.10/.gstreamer-plugins-core.keep - found ===> gnome2-2.26.3 depends on file: /usr/local/lib/gstreamer-0.10/libgstgconfelements.so - found ===> gnome2-2.26.3 depends on executable: totem - found ===> gnome2-2.26.3 depends on executable: gnome-control-center - found ===> gnome2-2.26.3 depends on file: /usr/local/share/gnome-background-properties/gnome-nature.xml - found ===> gnome2-2.26.3 depends on executable: evince - found ===> gnome2-2.26.3 depends on executable: alacarte - found ===> gnome2-2.26.3 depends on executable: gnome-power-manager - found ===> gnome2-2.26.3 depends on executable: orca - found ===> gnome2-2.26.3 depends on executable: gnome-mount - found ===> gnome2-2.26.3 depends on file: /usr/local/libexec/notification-daemon - found ===> gnome2-2.26.3 depends on executable: seahorse-agent - not found ===> Verifying install for seahorse-agent in /usr/ports/security/seahorse-plugins seahorse-plugins is using firefox for gecko support, but you can change that by defining WITH_GECKO to the following values: firefox libxul ===> Vulnerability check disabled, database not found ===> Found saved configuration for seahorse-plugins-2.26.2_2 ===> Extracting for seahorse-plugins-2.26.2_2 => MD5 Checksum OK for gnome2/seahorse-plugins-2.26.2.tar.bz2. => SHA256 Checksum OK for gnome2/seahorse-plugins-2.26.2.tar.bz2. ===> Patching for seahorse-plugins-2.26.2_2 ===> Applying FreeBSD patches for seahorse-plugins-2.26.2_2 ===> seahorse-plugins-2.26.2_2 depends on file: /usr/local/lib/firefox/libgtkembedmoz.so - not found ===> Verifying install for /usr/local/lib/firefox/libgtkembedmoz.so in /usr/ports/www/firefox ===> firefox-2.0.0.20_9,1 is forbidden: too many security issues http://www.vuxml.org/freebsd/922d2398-9e2d-11de-a998-0030843d3802.html http://www.vuxml.org/freebsd/49e8f2ee-8147-11de-a994-0030843d3802.html. *** Error code 1 Stop in /usr/ports/www/firefox. *** Error code 1 Stop in /usr/ports/security/seahorse-plugins. *** Error code 1 Stop in /usr/ports/security/seahorse-plugins. *** Error code 1 Stop in /usr/ports/x11/gnome2. *** Error code 1 Stop in /usr/ports/x11/gnome2. Best regards, Alex Alexey Chuprinin | Network Analyst, Connectivity | Hydrocarbon and Energy Industry Center Emerson Process Management | 7175 12 Street SE | Calgary | Alberta | T2H 2S6 | Canada T +1 403 258 6243 | F +1 403 258 6201 | Alexey.Chuprinin@Emerson.com From oberman at es.net Wed Sep 23 20:27:53 2009 From: oberman at es.net (Kevin Oberman) Date: Wed Sep 23 20:28:00 2009 Subject: GNOME2 building error on seahorse-plugins In-Reply-To: Your message of "Wed, 23 Sep 2009 12:50:05 MDT." Message-ID: <20090923202743.4CF401CC39@ptavv.es.net> > Date: Wed, 23 Sep 2009 12:50:05 -0600 > From: > Sender: owner-freebsd-gnome@freebsd.org > > Hi, > > I will greatly appreciate your help on the following issue. > I'm trying to build GNOME2 from ports collection. > I have freshly FreeBSD-7.2 installed on my notebook. I updated ports > with cvsup yesterday (Sep. 22, 2009) with "tag=.". > I have firefox-3.5.3,1 installed. > Here is building log: > > ===> Vulnerability check disabled, database not found > ===> Found saved configuration for gnome2-2.26.3 > ===> Extracting for gnome2-2.26.3 > ===> Patching for gnome2-2.26.3 > ===> gnome2-2.26.3 depends on file: /usr/local/bin/python2.6 - found > ===> Configuring for gnome2-2.26.3 > ===> Installing for gnome2-2.26.3 > ===> gnome2-2.26.3 depends on file: > /usr/local/libexec/gweather-applet-2 - found > ===> gnome2-2.26.3 depends on executable: > gnome-audio-profiles-properties - found > ===> gnome2-2.26.3 depends on executable: gnome-dictionary - found > ===> gnome2-2.26.3 depends on executable: eog - found > ===> gnome2-2.26.3 depends on executable: gconf-editor - found > ===> gnome2-2.26.3 depends on executable: gnect - found > ===> gnome2-2.26.3 depends on executable: gedit - found > ===> gnome2-2.26.3 depends on executable: gnome-terminal - found > ===> gnome2-2.26.3 depends on executable: gnome-session - found > ===> gnome2-2.26.3 depends on executable: bug-buddy - found > ===> gnome2-2.26.3 depends on executable: gnome-system-monitor - found > ===> gnome2-2.26.3 depends on executable: nautilus - found > ===> gnome2-2.26.3 depends on file: /usr/local/sbin/gdm - found > ===> gnome2-2.26.3 depends on file: > /usr/local/share/gnome/help/user-guide/C/user-guide.xml - found > ===> gnome2-2.26.3 depends on file: > /usr/local/share/sounds/question.wav - found > ===> gnome2-2.26.3 depends on file: > /usr/local/libdata/pkgconfig/libgail-gnome.pc - found > ===> gnome2-2.26.3 depends on executable: file-roller - found > ===> gnome2-2.26.3 depends on file: > /usr/local/share/themes/HighContrast/gtk-2.0/gtkrc - found > ===> gnome2-2.26.3 depends on executable: gok - found > ===> gnome2-2.26.3 depends on executable: gcalctool - found > ===> gnome2-2.26.3 depends on file: > /usr/local/lib/X11/fonts/bitstream-vera/Vera.ttf - found > ===> gnome2-2.26.3 depends on file: > /usr/local/libexec/gnome-netstatus-applet - found > ===> gnome2-2.26.3 depends on executable: dasher - found > ===> gnome2-2.26.3 depends on executable: evolution - found > ===> gnome2-2.26.3 depends on file: > /usr/local/libexec/evolution-webcal - found > ===> gnome2-2.26.3 depends on executable: network-admin - found > ===> gnome2-2.26.3 depends on executable: vino-passwd - found > ===> gnome2-2.26.3 depends on executable: > exchange-connector-setup-2.26 - found > ===> gnome2-2.26.3 depends on file: > /usr/local/lib/gstreamer-0.10/.gstreamer-plugins-core.keep - found > ===> gnome2-2.26.3 depends on file: > /usr/local/lib/gstreamer-0.10/libgstgconfelements.so - found > ===> gnome2-2.26.3 depends on executable: totem - found > ===> gnome2-2.26.3 depends on executable: gnome-control-center - found > ===> gnome2-2.26.3 depends on file: > /usr/local/share/gnome-background-properties/gnome-nature.xml - found > ===> gnome2-2.26.3 depends on executable: evince - found > ===> gnome2-2.26.3 depends on executable: alacarte - found > ===> gnome2-2.26.3 depends on executable: gnome-power-manager - found > ===> gnome2-2.26.3 depends on executable: orca - found > ===> gnome2-2.26.3 depends on executable: gnome-mount - found > ===> gnome2-2.26.3 depends on file: > /usr/local/libexec/notification-daemon - found > ===> gnome2-2.26.3 depends on executable: seahorse-agent - not found > ===> Verifying install for seahorse-agent in > /usr/ports/security/seahorse-plugins > > seahorse-plugins is using firefox for gecko support, but you can > change that by defining WITH_GECKO to the following values: > > firefox > libxul > > ===> Vulnerability check disabled, database not found > ===> Found saved configuration for seahorse-plugins-2.26.2_2 > ===> Extracting for seahorse-plugins-2.26.2_2 > => MD5 Checksum OK for gnome2/seahorse-plugins-2.26.2.tar.bz2. > => SHA256 Checksum OK for gnome2/seahorse-plugins-2.26.2.tar.bz2. > ===> Patching for seahorse-plugins-2.26.2_2 > ===> Applying FreeBSD patches for seahorse-plugins-2.26.2_2 > ===> seahorse-plugins-2.26.2_2 depends on file: > /usr/local/lib/firefox/libgtkembedmoz.so - not found > ===> Verifying install for /usr/local/lib/firefox/libgtkembedmoz.so > in /usr/ports/www/firefox > ===> firefox-2.0.0.20_9,1 is forbidden: too many security issues > http://www.vuxml.org/freebsd/922d2398-9e2d-11de-a998-0030843d3802.html > http://www.vuxml.org/freebsd/49e8f2ee-8147-11de-a994-0030843d3802.html. > *** Error code 1 > > Stop in /usr/ports/www/firefox. > *** Error code 1 > > Stop in /usr/ports/security/seahorse-plugins. > *** Error code 1 > > Stop in /usr/ports/security/seahorse-plugins. > *** Error code 1 > > Stop in /usr/ports/x11/gnome2. > *** Error code 1 > > Stop in /usr/ports/x11/gnome2. Add the line: WITH_GECKO=libxul to /etc/make.conf. (If the file does not exist, create it with that line in it.) Several ports still default to using firefox for gecko and firefox is vulnerable and can't be installed. This will be fixed in the near future, but the line in /etc/make.conf will take care of it until then. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From andy at neu.net Wed Sep 23 21:28:29 2009 From: andy at neu.net (AN) Date: Wed Sep 23 21:28:34 2009 Subject: shared object not found Message-ID: I have 2 problems on a newly installed system. FreeBSD core2.fu.bar 8.0-RC1 FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 When I try to run Realplayer I get the following: # realplay Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory (realplay.bin:79923): Gdk-WARNING **: gdk_propery-get(): invalid length 0 When trying to run totem I get: # totem /libexec/ld-elf.so.1: Shared object "libnssutil3.so.1" not found, required by "libtotem-plparser.so.12" I have the following apps installed: gnome2-2.26.3 The "meta-port" for the GNOME 2 integrated X11 desktop linux-realplayer-10.0.9.809.20070726 Linux RealPlayer 10 from RealNetworks linux_base-f10-10_2 Base set of packages needed in Linux mode for i386/amd64 libcanberra-0.10_5 Implementation of the Freedesktop sound theme spec totem-2.26.3_1 A gstreamer-based video player for the GNOME 2 Desktop totem-pl-parser-2.26.2_1 GObject-based library to parse a host of playlist formats # df -h linprocfs 4.0K 4.0K 0B 100% /usr/compat/linux/proc Any help would be appreciated. TIA From bsam at ipt.ru Thu Sep 24 12:38:24 2009 From: bsam at ipt.ru (Boris Samorodov) Date: Thu Sep 24 12:38:37 2009 Subject: shared object not found In-Reply-To: (AN's message of "Wed\, 23 Sep 2009 21\:28\:25 +0000 \(GMT\)") References: Message-ID: <01482424@serv3.int.kfs.ru> AN writes: > I have 2 problems on a newly installed system. > > FreeBSD core2.fu.bar 8.0-RC1 FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 > UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > amd64 > > When I try to run Realplayer I get the following: > > # realplay > Gtk-Message: Failed to load module "canberra-gtk-module": > libcanberra-gtk-module.so: cannot open shared object file: No such > file or directory > Gtk-Message: Failed to load module "gnomebreakpad": > libgnomebreakpad.so: cannot open shared object file: No such file or > directory > > (realplay.bin:79923): Gdk-WARNING **: gdk_propery-get(): invalid length 0 > > When trying to run totem I get: > # totem > /libexec/ld-elf.so.1: Shared object "libnssutil3.so.1" not found, > required by "libtotem-plparser.so.12" > > I have the following apps installed: > > gnome2-2.26.3 The "meta-port" for the GNOME 2 integrated X11 desktop > linux-realplayer-10.0.9.809.20070726 Linux RealPlayer 10 from RealNetworks > linux_base-f10-10_2 Base set of packages needed in Linux mode for > i386/amd64 > libcanberra-0.10_5 Implementation of the Freedesktop sound theme spec > totem-2.26.3_1 A gstreamer-based video player for the GNOME 2 Desktop > totem-pl-parser-2.26.2_1 GObject-based library to parse a host of > playlist formats > > # df -h > linprocfs 4.0K 4.0K 0B 100% /usr/compat/linux/proc > > Any help would be appreciated. Let's talk about linux-realplayer. Please, show an output of % pkg_info -xI linux WBR -- WBR, bsam From h.skuhra at gmail.com Thu Sep 24 14:22:57 2009 From: h.skuhra at gmail.com (Herbert J. Skuhra) Date: Thu Sep 24 14:23:29 2009 Subject: shared object not found In-Reply-To: References: Message-ID: <20090924140032.GB13134@oslo.ath.cx> On Wed, Sep 23, 2009 at 09:28:25PM +0000, AN wrote: > I have 2 problems on a newly installed system. > > FreeBSD core2.fu.bar 8.0-RC1 FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC > 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > > When I try to run Realplayer I get the following: > > # realplay > Gtk-Message: Failed to load module "canberra-gtk-module": > libcanberra-gtk-module.so: cannot open shared object file: No such file > or directory > Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: > cannot open shared object file: No such file or directory > > (realplay.bin:79923): Gdk-WARNING **: gdk_propery-get(): invalid length 0 There is no linux port available for audio/libcanberra and devel/bug-buddy. > When trying to run totem I get: > # totem > /libexec/ld-elf.so.1: Shared object "libnssutil3.so.1" not found, > required by "libtotem-plparser.so.12" You have to install security/nss. - Herbert From andy at neu.net Thu Sep 24 19:48:46 2009 From: andy at neu.net (AN) Date: Thu Sep 24 19:48:58 2009 Subject: shared object Message-ID: > I have 2 problems on a newly installed system. > > FreeBSD core2.fu.bar 8.0-RC1 FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 > UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > amd64 > > When I try to run Realplayer I get the following: > > # realplay > Gtk-Message: Failed to load module "canberra-gtk-module": > libcanberra-gtk-module.so: cannot open shared object file: No such > file or directory > Gtk-Message: Failed to load module "gnomebreakpad": > libgnomebreakpad.so: cannot open shared object file: No such file or > directory > > (realplay.bin:79923): Gdk-WARNING **: gdk_propery-get(): invalid length 0 Let's talk about linux-realplayer. Please, show an output of % pkg_info -xI linux WBR -- WBR, bsam Hi Boris: Thank you for your reply. Here is the output from pkg_info -xI linux: # pkg_info -xI linux linux-f10-atk-1.24.0 Accessibility Toolkit, Linux/i386 binary (Linux Fedora 10) linux-f10-cairo-1.8.0 Vector graphics library Cairo (Linux Fedora 10) linux-f10-curl-7.19.4_4 The command line tool for transferring files with URL synta linux-f10-cyrus-sasl2-2.1.22 RFC 2222 SASL (Simple Authentication and Security Layer) (L linux-f10-expat-2.0.1 Linux/i386 binary port of Expat XML-parsing library (Linux linux-f10-flashplugin-10.0r32 Adobe Flash Player NPAPI Plugin linux-f10-fontconfig-2.6.0 An XML-based font configuration API for X Windows (Linux Fe linux-f10-gtk2-2.14.7 GTK+ library, version 2.X (Linux Fedora 10) linux-f10-jpeg-6b RPM of the JPEG lib (Linux Fedora 10) linux-f10-libssh2-0.18 The library implementing the SSH2 protocol (Linux Fedora 10 linux-f10-nspr-4.7.4 Netscape Portable Runtime (Linux Fedora 10) linux-f10-nss-3.12.2.0 Network Security Services (Linux Fedora 10) linux-f10-openldap-2.4.12_1 Lightweight Directory Access Protocol libraries (Linux Fedo linux-f10-openssl-0.9.8g The OpenSSL toolkit (Linux Fedora 10) linux-f10-pango-1.22.3 The pango library (Linux Fedora 10) linux-f10-png-1.2.37 RPM of the PNG lib (Linux Fedora 10) linux-f10-sqlite3-3.5.9_1 The library that implements an embeddable SQL database engi linux-f10-tiff-3.8.2 The TIFF library, Linux/i386 binary (Linux Fedora 10) linux-f10-xorg-libs-7.4_1 Xorg libraries (Linux Fedora 10) linux-realplayer-10.0.9.809.20070726 Linux RealPlayer 10 from RealNetworks linux_base-f10-10_2 Base set of packages needed in Linux mode for i386/amd64 (L Please let me know if I can provide more info. From gesbbb at yahoo.com Sat Sep 26 10:24:15 2009 From: gesbbb at yahoo.com (Jerry) Date: Sat Sep 26 10:24:22 2009 Subject: GTK+ Project: Updates Message-ID: <20090926055733.2b3d3d9d@scorpio.seibercom.net> The GTK+ Project is reporting updated versions of the follow: 1) GTK 2) GlIB 3) Pango Are there any plans to get them updated in the ports system? -- Jerry gesbbb@yahoo.com Writing is easy; all you do is sit staring at the blank sheet of paper until drops of blood form on your forehead. Gene Fowler From barbara.xxx1975 at libero.it Sat Sep 26 11:44:16 2009 From: barbara.xxx1975 at libero.it (barbara) Date: Sat Sep 26 11:44:27 2009 Subject: audio/gnome-settings-daemon: should it chase pulseaudio update? Message-ID: $ pkg_info -Ix pulseaudio pulseaudio-0.9.18 Sound server for UNIX >From ~/.xsession-errors ** (gnome-settings-daemon:1209): WARNING **: Shared object "libpulsecommon-0.9.17.so" not found, required by "libmedia-keys.so" ** (gnome-settings-daemon:1209): WARNING **: Cannot load plugin 'Media keys' since file '/usr/local/lib/gnome-settings-daemon-2.0/libmedia-keys.so' cannot be read. ** (gnome-settings-daemon:1209): WARNING **: Error activating plugin 'Media keys' Best regards Barbara From barbara.xxx1975 at libero.it Sat Sep 26 11:46:15 2009 From: barbara.xxx1975 at libero.it (barbara) Date: Sat Sep 26 11:46:21 2009 Subject: sysutils/gnome-settings-daemon: should it chase pulseaudio update? Message-ID: Sorry, it's obviously about *sysutils*/gnome-settings-daemon. From marcus at FreeBSD.org Sat Sep 26 14:10:01 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Sat Sep 26 14:10:07 2009 Subject: ports/138861: sysutils/policykit depends on optional component for docbook-xsl Message-ID: <200909261410.n8QEA1nU001060@freefall.freebsd.org> Synopsis: sysutils/policykit depends on optional component for docbook-xsl State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Sat Sep 26 14:07:30 UTC 2009 State-Changed-Why: Unfortunately, there is no good fix for this. If you do not have NO_INSTALL_MANPAGES defined (this macro is documented in bsd.port.mk), then manpages will be built. In order to build manpages, the manpage stylesheet needs to exist. I suggest you file a PR against docbook-xsl requesting each module to be broken out into a separate port. This way, portsl ike policykit can depend on the proper module port, and ensure that the requisite stylesheet will be available. In the meantime, defining NO_INSTALL_MANPAGES in /etc/make.conf will prevent the extra dependencies from being installed. http://www.freebsd.org/cgi/query-pr.cgi?pr=138861 From marcus at FreeBSD.org Sat Sep 26 14:12:01 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Sat Sep 26 14:12:08 2009 Subject: ports/139038: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 Message-ID: <200909261412.n8QEC0JW010677@freefall.freebsd.org> Synopsis: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 State-Changed-From-To: open->closed State-Changed-By: marcus State-Changed-When: Sat Sep 26 14:10:26 UTC 2009 State-Changed-Why: The problem has to do with the timezone file being used. The timezone file in /etc/localtime is not what GNOME is expecting it to be. Therefore, the clock applet doesn't think your home location is still home. If you click the Set button next to the location in the clock applet, you should get your weather display back. http://www.freebsd.org/cgi/query-pr.cgi?pr=139038 From marcus at FreeBSD.org Sat Sep 26 14:13:02 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Sat Sep 26 14:13:08 2009 Subject: ports/134509: graphics/inkscape: after loading any type of data file (SVG, PDF, EPS ...) inkscape gets stuck and eating up 100% CPU :** (inkscape:1677): CRITICAL **: SPCurve* sp_curve_new_from_foreign_bpath(const NArtBpath*): assertion `new_bpath != N Message-ID: <200909261413.n8QED1rt010786@freefall.freebsd.org> Synopsis: graphics/inkscape: after loading any type of data file (SVG, PDF, EPS ...) inkscape gets stuck and eating up 100% CPU :** (inkscape:1677): CRITICAL **: SPCurve* sp_curve_new_from_foreign_bpath(const NArtBpath*): assertion `new_bpath != N State-Changed-From-To: open->feedback State-Changed-By: marcus State-Changed-When: Sat Sep 26 14:12:22 UTC 2009 State-Changed-Why: I am unable to reproduce. Is this still occurring given all the recent libxml updates? http://www.freebsd.org/cgi/query-pr.cgi?pr=134509 From edwin at FreeBSD.org Sat Sep 26 18:40:24 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sat Sep 26 18:40:36 2009 Subject: ports/139160: update port: devel/dbus This fixes dbus on systems using nss_ldap for users that are members of more than 16 groups. Message-ID: <200909261840.n8QIeOk1081648@freefall.freebsd.org> Synopsis: update port: devel/dbus This fixes dbus on systems using nss_ldap for users that are members of more than 16 groups. Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Sat Sep 26 18:40:23 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=139160 From oberman at es.net Sun Sep 27 00:42:46 2009 From: oberman at es.net (Kevin Oberman) Date: Sun Sep 27 00:42:52 2009 Subject: ports/139038: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 In-Reply-To: Your message of "Sat, 26 Sep 2009 14:12:00 GMT." <200909261412.n8QEC0JW010677@freefall.freebsd.org> Message-ID: <20090927004243.A52DD1CC13@ptavv.es.net> > Date: Sat, 26 Sep 2009 14:12:00 GMT > From: marcus@FreeBSD.org > > Synopsis: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 > > State-Changed-From-To: open->closed > State-Changed-By: marcus > State-Changed-When: Sat Sep 26 14:10:26 UTC 2009 > State-Changed-Why: > The problem has to do with the timezone file being used. The timezone file > in /etc/localtime is not what GNOME is expecting it to be. Therefore, the > clock applet doesn't think your home location is still home. If you click > the Set button next to the location in the clock applet, you should get > your weather display back. > > http://www.freebsd.org/cgi/query-pr.cgi?pr=139038 > Not sure what "Set" button you refer to. I see none in the "Locations" tab. There is a "Time Settings", but it did nothing to press the "Set System Time" in the time settings window. I did note that the zone files in 8.0 are very different from those in V7. The file now in /usr/share/zoneinfo/America/Los_Angeles is 2819 bytes while it was only 1701 in V7. I see nothing in UPDATING about this, but something changed and, once I replaced /etc/localtime with the now file, the local weather reappeared. Thanks! -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From marcus at FreeBSD.org Sun Sep 27 00:53:46 2009 From: marcus at FreeBSD.org (Joe Marcus Clarke) Date: Sun Sep 27 00:53:52 2009 Subject: ports/139038: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 In-Reply-To: <20090927004243.A52DD1CC13@ptavv.es.net> References: <20090927004243.A52DD1CC13@ptavv.es.net> Message-ID: <1254012824.1274.34.camel@shumai.marcuscom.com> On Sat, 2009-09-26 at 17:42 -0700, Kevin Oberman wrote: > > Date: Sat, 26 Sep 2009 14:12:00 GMT > > From: marcus@FreeBSD.org > > > > Synopsis: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 > > > > State-Changed-From-To: open->closed > > State-Changed-By: marcus > > State-Changed-When: Sat Sep 26 14:10:26 UTC 2009 > > State-Changed-Why: > > The problem has to do with the timezone file being used. The timezone file > > in /etc/localtime is not what GNOME is expecting it to be. Therefore, the > > clock applet doesn't think your home location is still home. If you click > > the Set button next to the location in the clock applet, you should get > > your weather display back. > > > > http://www.freebsd.org/cgi/query-pr.cgi?pr=139038 > > > > Not sure what "Set" button you refer to. I see none in the "Locations" > tab. There is a "Time Settings", but it did nothing to press the "Set > System Time" in the time settings window. If you click on the clock applet, a pull-down appears showing the calendar and map. Below the map are the configured locations. Next to the home location is a house icon. Next to all other locations where the house icon would be will appear a Set button when you put the mouse in that area. Joe > > I did note that the zone files in 8.0 are very different from those in > V7. The file now in /usr/share/zoneinfo/America/Los_Angeles is 2819 > bytes while it was only 1701 in V7. I see nothing in UPDATING about > this, but something changed and, once I replaced /etc/localtime with the > now file, the local weather reappeared. > > Thanks! -- Joe Marcus Clarke FreeBSD GNOME Team :: gnome@FreeBSD.org FreeNode / #freebsd-gnome http://www.FreeBSD.org/gnome -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090927/3f2791ef/attachment.pgp From marcus at FreeBSD.org Sun Sep 27 00:54:17 2009 From: marcus at FreeBSD.org (marcus@FreeBSD.org) Date: Sun Sep 27 00:54:23 2009 Subject: ports/134509: graphics/inkscape: after loading any type of data file (SVG, PDF, EPS ...) inkscape gets stuck and eating up 100% CPU :** (inkscape:1677): CRITICAL **: SPCurve* sp_curve_new_from_foreign_bpath(const NArtBpath*): assertion `new_bpath != N Message-ID: <200909270054.n8R0sGWX072214@freefall.freebsd.org> Synopsis: graphics/inkscape: after loading any type of data file (SVG, PDF, EPS ...) inkscape gets stuck and eating up 100% CPU :** (inkscape:1677): CRITICAL **: SPCurve* sp_curve_new_from_foreign_bpath(const NArtBpath*): assertion `new_bpath != N State-Changed-From-To: feedback->closed State-Changed-By: marcus State-Changed-When: Sun Sep 27 00:53:58 UTC 2009 State-Changed-Why: The submitter reports it is working now. http://www.freebsd.org/cgi/query-pr.cgi?pr=134509 From oberman at es.net Sun Sep 27 03:18:31 2009 From: oberman at es.net (Kevin Oberman) Date: Sun Sep 27 03:18:38 2009 Subject: ports/139038: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 In-Reply-To: Your message of "Sat, 26 Sep 2009 20:53:44 EDT." <1254012824.1274.34.camel@shumai.marcuscom.com> Message-ID: <20090927031830.688E41CC0E@ptavv.es.net> > From: Joe Marcus Clarke > Date: Sat, 26 Sep 2009 20:53:44 -0400 > > On Sat, 2009-09-26 at 17:42 -0700, Kevin Oberman wrote: > > > Date: Sat, 26 Sep 2009 14:12:00 GMT > > > From: marcus@FreeBSD.org > > > > > > Synopsis: x11/gnome-applets: clock applet no longer shows weather information on FreeBSD 8.0 > > > > > > State-Changed-From-To: open->closed > > > State-Changed-By: marcus > > > State-Changed-When: Sat Sep 26 14:10:26 UTC 2009 > > > State-Changed-Why: > > > The problem has to do with the timezone file being used. The timezone file > > > in /etc/localtime is not what GNOME is expecting it to be. Therefore, the > > > clock applet doesn't think your home location is still home. If you click > > > the Set button next to the location in the clock applet, you should get > > > your weather display back. > > > > > > http://www.freebsd.org/cgi/query-pr.cgi?pr=139038 > > > > > > > Not sure what "Set" button you refer to. I see none in the "Locations" > > tab. There is a "Time Settings", but it did nothing to press the "Set > > System Time" in the time settings window. > > If you click on the clock applet, a pull-down appears showing the > calendar and map. Below the map are the configured locations. Next to > the home location is a house icon. Next to all other locations where > the house icon would be will appear a Set button when you put the mouse > in that area. I see it. I never change my location, so had not seen it, but I doubt it would have helped, in any case. The cause was r196683 which updated zic and changed the format of the zonefiles. I missed the note in UPDATING that I need to run tzsetup to install the new zonefile. Thanks again! -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From areilly at bigpond.net.au Sun Sep 27 08:00:15 2009 From: areilly at bigpond.net.au (Andrew Reilly) Date: Sun Sep 27 08:00:33 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Message-ID: <200909270800.n8R80FXx041154@freefall.freebsd.org> The following reply was made to PR ports/138872; it has been noted by GNATS. From: Andrew Reilly To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul Date: Sun, 27 Sep 2009 15:24:57 +1000 Still broken for me, I'm afraid. I had uninstalled firefox2 before I installed libxul, but this weekend I uninstalled firefox3, and removed (I think) all trace of foxes from my system, then reinstalled libxul and epiphany and it still breaks as per the original bug submission. I even moved my .mozilla directory aside: no change. Looking forward to webkit-gtk2 in 2.28... From beat at FreeBSD.org Sun Sep 27 14:27:28 2009 From: beat at FreeBSD.org (Beat Gaetzi) Date: Sun Sep 27 14:27:44 2009 Subject: Building devel/gtkmozedit with libxul gecko provider Message-ID: <4ABF7367.6050300@FreeBSD.org> Hi, We are going to remove xulrunner, Firefox 2 and Mozilla from the ports tree. We created a patch which switches all ports using xulrunner, firefox or mozilla gecko provider to libxul. Unfortunately three ports failed during the exp-run. One of them is devel/gtkmozedit which is maintained by the Gnome team. I tried to fix this problem but was not successful. Could you please take a look at this problem. Is it possible to use gtkmozedit with libxul gecko provider? If not, should we remove the port? Patch which was tested on pointyhat is available here (updated version for current ports tree): http://tmp.chruetertee.ch/gecko-ff-removal-part2-v0.3.patch Pointyhat log is here: http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.7-exp.20090917174615/gtkmozedit-0.3.0_5.log Thanks, Beat, on behalf of the FreeBSD-Gecko Team From oberman at es.net Sun Sep 27 15:02:07 2009 From: oberman at es.net (Kevin Oberman) Date: Sun Sep 27 15:02:13 2009 Subject: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul In-Reply-To: Your message of "Sun, 27 Sep 2009 08:00:15 GMT." <200909270800.n8R80FXx041154@freefall.freebsd.org> Message-ID: <20090927150154.2EAD61CC0E@ptavv.es.net> > Date: Sun, 27 Sep 2009 08:00:15 GMT > From: Andrew Reilly > Sender: owner-freebsd-gnome@freebsd.org > > The following reply was made to PR ports/138872; it has been noted by GNATS. > > From: Andrew Reilly > To: bug-followup@FreeBSD.org > Cc: > Subject: Re: ports/138872: www/epiphany doesn't work when WITH_GECKO=libxul > Date: Sun, 27 Sep 2009 15:24:57 +1000 > > Still broken for me, I'm afraid. I had uninstalled firefox2 > before I installed libxul, but this weekend I uninstalled > firefox3, and removed (I think) all trace of foxes from my > system, then reinstalled libxul and epiphany and it still breaks > as per the original bug submission. I even moved my .mozilla > directory aside: no change. Other possibilities come to mind. seamonkey and thunderbird. Old copies of these include old gecko header files. The other is some old header that is still hanging around the system. These can be hard to track down...very hard. The only real answer is to remove all ports, delete everything in /usr/local, and reinstall. This is not hard, but VERY time consuming. At over 1000 ports installed on my laptop and it being an old 2 GHz uniprocessor, it can take quite a while. I, too, am looking forward to 2.28 and all that comes with it, but I am resigned to having issues with the upgrade. Gnome is just so big and complex that it is hard to make an upgrade go completely smoothly for every system. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 From bugmaster at FreeBSD.org Mon Sep 28 11:07:16 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Sep 28 11:10:07 2009 Subject: Current problem reports assigned to gnome@FreeBSD.org Message-ID: <200909281107.n8SB7FKg064372@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/139160 gnome update port: devel/dbus This fixes dbus on systems u a ports/138872 gnome www/epiphany doesn't work when WITH_GECKO=libxul f ports/137368 gnome x11-toolkits/libwnck: add menu option to configure dep s ports/137367 gnome net/libproxy: add menu option to configure dependence s ports/136967 gnome security/seahorse-plugins 2.26.2_1 + GPG = fail p ports/136676 gnome x11/gnome2: hald/GNOME (I guess) (re) mounted /usr and f ports/136435 gnome security/gnome-keyring + hald prevents umount of usb d p ports/134737 gnome Update www/webkit-gtk2 to 1.1.7 f ports/134536 gnome [patch] graphics/gimp: Gimp 2.6.6 fails to open URI's a ports/134361 gnome devel/gvfs ports with smbclient support doesn't pass a f ports/134358 gnome x11/gnome2: trackerd uses up all of the cpu o ports/132304 gnome ports/devel/dbus misses /var/db/dbus/machine-id in dis 12 problems total. From shuvaev at physik.uni-wuerzburg.de Mon Sep 28 19:31:20 2009 From: shuvaev at physik.uni-wuerzburg.de (Alexey Shuvaev) Date: Mon Sep 28 19:31:26 2009 Subject: Test patch to slgtk to fit gtk-2.18? In-Reply-To: <20090928180241.GA13213@space> References: <20090928114239.GA58251@wep4035.physik.uni-wuerzburg.de> <20090928161316.GA7368@space> <20090928180241.GA13213@space> Message-ID: <20090928185936.GA79514@wep4035.physik.uni-wuerzburg.de> Hello gnome team! Recently I have noticed this build failure of one of my ports: http://pointyhat.freebsd.org/errorlogs/i386-7-exp-latest/slgtk-0.7.5_1.log After reactive response from Michael Noble, the author of slgtk, I realized that gtk-2.18 is not in the ports yet and that there was an experimental ports' build run. Well, could someone with access to the new experimental gtk-2.18 packages test x11-toolkits/slgtk with the following patch dropped into files/ in the port directory? Big thanks to Michael for providing the patch within few hours! -------------- next part -------------- --- src/slirprc-gtk.sl.orig 2009-02-02 20:23:59.000000000 +0100 +++ src/slirprc-gtk.sl 2009-09-28 20:15:24.000000000 +0200 @@ -308,6 +308,9 @@ gtk_widget_get_window % prefer my version, which returns % bin_window for GtkLayout +gtk_widget_get_allocation % prefer my version, which returns + % allocation struct on stack + gtk_accel_group_activate % gtk/gtkaccelgroup.h: "internal" funcs gtk_accel_group_get_entry gtk_accel_group_lock_entry From mbeis at xs4all.nl Tue Sep 29 20:45:02 2009 From: mbeis at xs4all.nl (Marco Beishuizen) Date: Tue Sep 29 20:45:09 2009 Subject: gnome-commander glib error In-Reply-To: <4AB766E2.6000009@yandex.ru> References: <4AB7569A.1030200@yandex.ru> <4AB766E2.6000009@yandex.ru> Message-ID: On Mon, 21 Sep 2009, Andrey V. Elsukov wrote: > Andrey V. Elsukov wrote: >> I have the same problem, did you find any solutions? >> My system is 9.0-CURRENT-amd64 with 2G RAM. >> I got an error: >> >> GLib-ERROR **: gmem.c:156: failed to allocate 18446744073709551615 bytes >> aborting... > > So, I rebuild it with DEBUG_FLAGS=-g and found that it crashes in > GnomeCmdOwner > constructor. After that i found this fix: > http://mail.gnome.org/archives/svn-commits-list/2009-August/msg02622.html > > Also I found that it already fixed and i just should update my ports :) > http://www.freebsd.org/cgi/query-pr.cgi?pr=137684 > > Sorry for th noise. :) Hi Andrey, Sorry for my late response, I didn't check the freebsd mailing list well enough. At this moment I'm unable to upgrade gnome-commander to the version with the patch. The configure script exits with the error: ... checking lex library... -lfl checking whether yytext is a pointer... yes ./configure: 6479: Syntax error: word unexpected (expecting ")") ===> Script "configure" failed unexpectedly. Please report the problem to scjamorim@bsd.com.br [maintainer] and attach the "/usr/ports/x11-fm/gnome-commander2/work/gnome-commander-1.2.8.1/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11-fm/gnome-commander2. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade20090929-77520-e3d1vs-0 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=gnome-commander2-1.2.8,1 UPGRADE_PORT_VER=1.2.8,1 make ** Fix the problem and try again. ** Listing the failed packages (-:ignored / *:skipped / !:failed) ! x11-fm/gnome-commander2 (gnome-commander2-1.2.8,1) (unknown build error) ... I'll send the output to the port maintainer, but perhaps you have an idea what causes this problem. Thanks and regards, Marco -- I will make you shorter by the head. -- Elizabeth I From larry at kiputers.com Tue Sep 29 20:45:41 2009 From: larry at kiputers.com (larry) Date: Tue Sep 29 20:45:48 2009 Subject: Problem/Solution to building intltool-0.4.6 Message-ID: <20090929204541.D24521065692@hub.freebsd.org> To whomever maintains intltool for FreeBSD... I had a problem all day today trying to upgrade from intltool 0.4.5 to intltool 0.4.6. Turns out the problem was with the make process in FreeBSD. If I did make on the port, it wouldn't install, and produced a configure.rej file that wasn't very clear on the problem. Anyway, I found on the net, that one should use gmake, instead of make. After I ran gmake, all was good. So you, may want to update the port to call gmake. Larry From edwin at FreeBSD.org Wed Sep 30 02:10:15 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Wed Sep 30 02:10:26 2009 Subject: ports/139245: [patch] security/nss header file permission fix Message-ID: <200909300210.n8U2AE95018891@freefall.freebsd.org> Synopsis: [patch] security/nss header file permission fix Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Wed Sep 30 02:10:14 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=139245 From linimon at FreeBSD.org Wed Sep 30 16:09:02 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Wed Sep 30 16:09:14 2009 Subject: ports/139247: hald uses nearly 100% of CPU on 8.0-rc1 Message-ID: <200909301609.n8UG92k2026005@freefall.freebsd.org> Synopsis: hald uses nearly 100% of CPU on 8.0-rc1 Responsible-Changed-From-To: freebsd-bugs->gnome Responsible-Changed-By: linimon Responsible-Changed-When: Wed Sep 30 16:08:46 UTC 2009 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=139247 From datahead4 at gmail.com Wed Sep 30 22:22:33 2009 From: datahead4 at gmail.com (Matt) Date: Wed Sep 30 22:22:39 2009 Subject: pthread_mutexattr_settype assertion from PulseAudio with Amarok 2.2 Message-ID: Does anyone know if the root cause of the "Assertion ?pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE) == 0? failed at pulsecore/mutex-posix.c:52, function pa_mutex_new(). Aborting." error discussed at: http://miwi.bsdcrew.de/2009/07/firefox-35-in-ports/ was ever determined? I'm seeing this same error when trying to update the amarok-kde4 port to version 2.2 and the only discussion I can find related to this issue is at http://lists.freebsd.org/pipermail/freebsd-gnome/2009-July/022732.html and I don't see a resolution. Relevant data about my system: - All ports built in Tinderbox with "WITH_DEBUG=yes" set - Tinderbox jail is 8-STABLE from 2009-09-10 16:42:33 - Tinderbox ports were updated 2009-09-14 12:59:10 - System where ports are installed is same host running the Tinderbox. "uname -a" states (sanitized) "FreeBSD 8.0-RC1 FreeBSD 8.0-RC1 #0: Mon Sep 21 09:46:16 CDT 2009 root@:/usr/obj/usr/src/sys/CUSTOM i386" - pkg_info list available at http://freebsd-gnome.pastebin.com/m1b0d9c9f I can't seem to get any usable core dumps from the system, but I can provide ktrace or other output if anyone is interested. Thank you, Matt From edwin at FreeBSD.org Wed Sep 30 22:30:28 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Wed Sep 30 22:30:41 2009 Subject: ports/139267: 8.0 RC1 cannot upgrade sysutils/hal Message-ID: <200909302230.n8UMURvo019474@freefall.freebsd.org> Synopsis: 8.0 RC1 cannot upgrade sysutils/hal Responsible-Changed-From-To: freebsd-ports-bugs->gnome Responsible-Changed-By: edwin Responsible-Changed-When: Wed Sep 30 22:30:27 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=139267 From marcus at marcuscom.com Wed Sep 30 22:38:24 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Wed Sep 30 22:38:31 2009 Subject: Problem/Solution to building intltool-0.4.6 In-Reply-To: <20090929204541.D24521065692@hub.freebsd.org> References: <20090929204541.D24521065692@hub.freebsd.org> Message-ID: <1254350310.94567.32.camel@shumai.marcuscom.com> On Tue, 2009-09-29 at 15:18 -0500, larry wrote: > To whomever maintains intltool for FreeBSD... > > I had a problem all day today trying to upgrade from intltool 0.4.5 to > intltool 0.4.6. > > Turns out the problem was with the make process in FreeBSD. > > If I did make on the port, it wouldn't install, and produced a configure.rej > file that wasn't very clear on the problem. > > Anyway, I found on the net, that one should use gmake, instead of make. > > After I ran gmake, all was good. > > So you, may want to update the port to call gmake. The port already uses gmake. Look at line 21 in the Makefile. Joe -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090930/cd574b1a/attachment.pgp From marcus at marcuscom.com Wed Sep 30 22:39:24 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Wed Sep 30 22:39:36 2009 Subject: Building devel/gtkmozedit with libxul gecko provider In-Reply-To: <4ABF7367.6050300@FreeBSD.org> References: <4ABF7367.6050300@FreeBSD.org> Message-ID: <1254350367.94567.33.camel@shumai.marcuscom.com> On Sun, 2009-09-27 at 16:15 +0200, Beat Gaetzi wrote: > Hi, > > We are going to remove xulrunner, Firefox 2 and Mozilla from the ports > tree. We created a patch which switches all ports using xulrunner, > firefox or mozilla gecko provider to libxul. > Unfortunately three ports failed during the exp-run. One of them is > devel/gtkmozedit which is maintained by the Gnome team. I tried to fix > this problem but was not successful. > Could you please take a look at this problem. Is it possible to use > gtkmozedit with libxul gecko provider? If not, should we remove the port? > > Patch which was tested on pointyhat is available here (updated version > for current ports tree): > http://tmp.chruetertee.ch/gecko-ff-removal-part2-v0.3.patch > > Pointyhat log is here: > http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.7-exp.20090917174615/gtkmozedit-0.3.0_5.log The log is gone, but I have no interest in updating gtkmozedit for libxul. If none of the other team members reply, then feel free to remove it. Joe -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090930/1ab236c0/attachment.pgp From marcus at marcuscom.com Wed Sep 30 22:46:59 2009 From: marcus at marcuscom.com (Joe Marcus Clarke) Date: Wed Sep 30 22:47:06 2009 Subject: pthread_mutexattr_settype assertion from PulseAudio with Amarok 2.2 In-Reply-To: References: Message-ID: <1254350826.94567.41.camel@shumai.marcuscom.com> On Wed, 2009-09-30 at 16:59 -0500, Matt wrote: > Does anyone know if the root cause of the "Assertion > ?pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE) == 0? > failed at pulsecore/mutex-posix.c:52, function pa_mutex_new(). > Aborting." error discussed at: > > http://miwi.bsdcrew.de/2009/07/firefox-35-in-ports/ > > was ever determined? I'm seeing this same error when trying to update > the amarok-kde4 port to version 2.2 and the only discussion I can find > related to this issue is at > http://lists.freebsd.org/pipermail/freebsd-gnome/2009-July/022732.html > and I don't see a resolution. > > Relevant data about my system: > - All ports built in Tinderbox with "WITH_DEBUG=yes" set > - Tinderbox jail is 8-STABLE from 2009-09-10 16:42:33 > - Tinderbox ports were updated 2009-09-14 12:59:10 > - System where ports are installed is same host running the Tinderbox. > "uname -a" states (sanitized) "FreeBSD 8.0-RC1 FreeBSD > 8.0-RC1 #0: Mon Sep 21 09:46:16 CDT 2009 > root@:/usr/obj/usr/src/sys/CUSTOM i386" > - pkg_info list available at http://freebsd-gnome.pastebin.com/m1b0d9c9f > > I can't seem to get any usable core dumps from the system, but I can > provide ktrace or other output if anyone is interested. I think there is a bug in the pthread_stubs in libc. If you apply this patch, then rebuild libc, does the problem go away: http://www.marcuscom.com/downloads/_pthread_stubs.c.diff Joe > > Thank you, > Matt > _______________________________________________ > freebsd-gnome@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org" > -- PGP Key : http://www.marcuscom.com/pgp.asc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090930/e4c1a6e5/attachment.pgp