Possible missing file in hal installation

Tue Mar 20 10:39:36 UTC 2007

On Tue, 20 Mar 2007 06:35:24 +0100
Jean-Yves Lefort <jylefort at FreeBSD.org> wrote:

> On Mon, 19 Mar 2007 20:53:46 +1100
> Nick Withers <nick at nickwithers.com> wrote:
> 
> > Firstly, I've just pasted the existing thread in from
> > "http://lists.freebsd.org/pipermail/freebsd-gnome/2007-January/016501.html",
> > sorry if I stuffed it up at all and my apologies to those with
> > threaded mail clients...
> >
> > > On Wed, 2007-01-03 at 21:13 +0800, manphiz at gmail.com wrote:
> > > > Joe Marcus Clarke wrote:
> > > > > No, there is nothing useful here.  The ktrace looks good.
> > > > > The last thing hald does is read the PCI config registers
> > > > > (part of the initial PCI bus probe).  You need to get a
> > > > > full backtrace from hald once it appears to lock up.  To do
> > > > > that, you should run hald manually, then use gdb to bind to
> > > > > it once it's locked up.  Then get a full backtrace.
> > > > >
> > > > > Joe
> > > > >
> > > > >
> > > > Thanks a lot for the instruction! I attached to the
> > > > deadlocked process, and get this backtrace:
> > > >
> > > > (gdb) bt
> > > > #0  hf_pci_probe () at hf-pci.c:150
> > > > #1  0x0805ced7 in osspec_probe () at osspec.c:96
> > > > #2  0x080551dd in main (argc=3, argv=0xbfbfeb5c) at hald.c:578
> > >
> > > This backtrace doesn't make sense.  Line 150 of hf-pci.c is not
> > > in hf_pci_probe().  The real line 150 represents a loop that
> > > iterates through the devices list.  This list must be finite.
> > > I don't see how this problem could occur based on this
> > > information.
> >
> > I appear to be in a similar scenario on my HP Compaq Presario
> > B3820 (believe I'm using the latest firmware versions).
> >

(snip)

> > If anyone's got an idea or two up their sleeves about how I might
> > go about fixing this, I'd be very grateful to hear about it!
> 
> Please install sysutils/pciutils and send me the output of "lspci
> -v".

With pleasure!
____

presario# lspci -v
pcilib: Bus 02 seen twice (firmware bug). Ignored.
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21)
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable)
        Capabilities: [e4] Vendor Specific Information
        Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d0100000-d01fffff
        Prefetchable memory behind bridge: d8000000-dfffffff

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1800

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1820

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1840

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 0, IRQ 7
        Memory at d0000000 (32-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: d0200000-d02fffff

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 0, IRQ 255
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at 1860

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: medium devsel, IRQ 9
        I/O ports at 1880

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1c00
        I/O ports at 18c0
        Memory at d0000c00 (32-bit, non-prefetchable)
        Memory at d0000800 (32-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 2400
        I/O ports at 2000
        Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 9
        Memory at d8000000 (32-bit, prefetchable)
        I/O ports at 3000
        Memory at d0100000 (32-bit, non-prefetchable)
        Capabilities: [58] AGP version 2.0
        Capabilities: [50] Power Management version 2

02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 32, IRQ 9
        Memory at d0202000 (32-bit, non-prefetchable)
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        16-bit legacy interface ports at 0001

02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 32, IRQ 9
        Memory at d0203000 (32-bit, non-prefetchable)
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
        16-bit legacy interface ports at 0001

02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 01) (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at d0201000 (32-bit, non-prefetchable)
        Capabilities: [dc] Power Management version 2

02:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Hewlett-Packard Company Unknown device 3089
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at 4000
        Memory at d0201800 (32-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2

02:09.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
        Subsystem: Hewlett-Packard Company Unknown device 12f6
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at d0200000 (32-bit, non-prefetchable)
        Capabilities: [dc] Power Management version 2
____

Also, since I forgot last time and in case it's useful, here's a
dmesg:
____

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Sun Mar 18 00:29:02 EST 2007
    nick at presario.shmon.net:/usr/obj/usr/src/sys/PRESARIO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.70GHz (1694.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 536281088 (511 MB)
avail memory = 514777088 (490 MB)
kbd1 at kbdmux0
acpi0: <PTLTD CooperSp> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link0: BIOS IRQ 10 for 0.29.INTA is invalid
pci_link3: BIOS IRQ 3 for 0.29.INTB is invalid
pci_link2: BIOS IRQ 11 for 0.29.INTC is invalid
pci_link1: BIOS IRQ 5 for 0.31.INTB is invalid
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci_link0: BIOS IRQ 10 for 1.0.INTA is invalid
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon RV350 Mobility 9600 M10 NP> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xd0100000-0xd010ffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized radeon 1.24.0 20060225
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xd0000000-0xd00003ff irq 7 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link2: BIOS IRQ 11 for 2.7.INTC is invalid
pci_link1: BIOS IRQ 5 for 2.8.INTA is invalid
pci_link2: BIOS IRQ 11 for 2.9.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
cbb0: <RF5C476 PCI-CardBus Bridge> at device 7.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> at device 7.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <Ricoh R5C552> mem 0xd0201000-0xd02017ff irq 9 at device 7.2 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 10:cf:fd:00:00:13:93:66
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0x4000-0x40ff mem 0xd0201800-0xd02018ff irq 9 at device 8.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:13:21:10:b0:77
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0200000-0xd0200fff irq 9 at device 9.0 on pci2
iwi0: Ethernet address: 00:0e:35:d6:8b:3f
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xd0000c00-0xd0000dff,0xd0000800-0xd00008ff irq 9 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xdf000-0xdffff,0xe0000-0xe3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1
kbd2 at ukbd0
uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
ums0: 8 buttons and Z dir.
Timecounter "TSC" frequency 1694511574 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging limited to 1000 packets/entry by default
ad0: 57231MB <HTS548060M9AT00 MGBOA53A> at ata0-master UDMA100
cpu0: Cx states changed
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: DVDR <HL-DT-ST DVD-RW GWA-4080N/0G03> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GWA-4080N 0G03> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: cd present [3474532 x 2048 byte records]
Trying to mount root from ufs:/dev/ad0s1a
____

> --
> Jean-Yves Lefort
> 
> jylefort at FreeBSD.org
> http://lefort.be.eu.org/

Thanks for your time!
-- 
Nick Withers
email: nick at nickwithers.com
Web: http://www.nickwithers.com
Mobile: +61 414 397 446