GnomeSpeech 0.3.6 Will not install from ports, just hangs
Tim Cleaver
tim.cleaver at gmail.com
Mon Mar 21 21:25:32 PST 2005
To whom it may concern,
I am attempting to install gnome 2.10 and a requirement of this is
gnomespeech (currently 0.3.6). However, when i go to install it I get
the following error:
checking if f77 supports -c -o file.o... yes
checking whether the f77 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... freebsd5.3 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for pkg-config... /usr/local/bin/pkg-config
checking for bonobo-activation-2.0 >= 0.9.1 libbonobo-2.0 >= 1.97.0
ORBit-2.0 >= 2.3.94... yes
checking gnome_speech_CFLAGS... -DORBIT2=1 -D_REENTRANT
-I/usr/local/include/bon obo-activation-2.0
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/inclu de
-I/usr/local/include/orbit-2.0 -I/usr/local/include/libbonobo-2.0
checking gnome_speech_LIBS... -Wl,--export-dynamic -pthread
-L/usr/local/lib -lb onobo-2 -lbonobo-activation -lORBit-2 -lm
-lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -liconv
checking for eciNew in -libmeci... no
checking for TextToSpeechSync in -ltts... no
test: x: unexpected operator
checking for "/bin/theta-config"... no
checking for "/usr/local/bin/java"... yes
checking for "/usr/local/bin/javac"... yes
^C
root@/usr/ports/accessibility/gnomespeech> ===> Script "configure"
failed unexpectedly.
Please direct the output of the failure of the make command to a file, and
then feed that file to the gnomelogalyzer, available from
http://www.freebsd.org/gnome/gnomelogalyzer.sh, which will diagnose the problem
and suggest a solution. If - and only if - the gnomelogalyzer cannot solve
the problem, report the problem to the FreeBSD GNOME team at gnome at FreeBSD.org,
and attach
"/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/config.log" and
the output of the failure of the make command. Also, it might be a good idea
to provide an overview of all packages installed on your system (e.g. an `ls
/var/db/pkg`).
The problem is that after the checking for "usr/local/bin/javac" the
install sits there and does nothing. I have let it run for over an
hour and it is still doing nothing. As a result I don't know what
output I should run through gnomelogalyzer as it didn't produce an
error as such, just sat there doing nothing for an inordinate amount
of time.
As required in the error message here is the config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure --enable-static --prefix=/usr/local
--build=i386-portbld-freebsd5.3
## --------- ##
## Platform. ##
## --------- ##
hostname = pc078650.sci.griffith.edu.au
uname -m = i386
uname -r = 5.3-RELEASE-p1
uname -s = FreeBSD
uname -v = FreeBSD 5.3-RELEASE-p1 #7: Tue Nov 23 11:49:52 EST 2004
tim at pc078650.sci.griffith.edu.au:/usr/obj/usr/src/sys/KERNCONF
/usr/bin/uname -p = i386
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/libexec/libtool15
PATH: /sbin
PATH: /bin
PATH: /usr/local/bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /usr/X11R6/bin
PATH: /root/bin
PATH: /usr/local/jdk1.5.0/bin
PATH: /usr/local/libexec/libtool14/
PATH: /usr/OpenOffice.org1.1.2/
PATH: /root/source/agents/saci/bin/
PATH: /root/source/agents/jason/bin/
PATH: .
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1554: checking for a BSD-compatible install
configure:1609: result: /usr/bin/install -c -o root -g wheel
configure:1620: checking whether build environment is sane
configure:1663: result: yes
configure:1696: checking for gawk
configure:1725: result: no
configure:1696: checking for mawk
configure:1725: result: no
configure:1696: checking for nawk
configure:1712: found /usr/bin/nawk
configure:1722: result: nawk
configure:1732: checking whether gmake sets $(MAKE)
configure:1752: result: yes
configure:1936: checking whether to enable maintainer-specific
portions of Makefiles
configure:1945: result: no
configure:2008: checking for gcc
configure:2034: result: cc
configure:2278: checking for C compiler version
configure:2281: cc --version </dev/null >&5
cc (GCC) 3.4.2 [FreeBSD] 20040728
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2284: $? = 0
configure:2286: cc -v </dev/null >&5
Using built-in specs.
Configured with: FreeBSD/i386 system compiler
Thread model: posix
gcc version 3.4.2 [FreeBSD] 20040728
configure:2289: $? = 0
configure:2291: cc -V </dev/null >&5
cc: `-V' option must have argument
configure:2294: $? = 1
configure:2317: checking for C compiler default output file name
configure:2320: cc -O -pipe -I/usr/local/include -I/usr/X11R6/include
-L/usr/local/lib -L/usr/X11R6/lib conftest.c >&5
configure:2323: $? = 0
configure:2369: result: a.out
configure:2374: checking whether the C compiler works
configure:2380: ./a.out
configure:2383: $? = 0
configure:2400: result: yes
configure:2407: checking whether we are cross compiling
configure:2409: result: no
configure:2412: checking for suffix of executables
configure:2414: cc -o conftest -O -pipe -I/usr/local/include
-I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib conftest.c >&5
configure:2417: $? = 0
configure:2442: result:
configure:2448: checking for suffix of object files
configure:2469: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:2472: $? = 0
configure:2494: result: o
configure:2498: checking whether we are using the GNU C compiler
configure:2522: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:2528: $? = 0
configure:2532: test -z
|| test ! -s conftest.err
configure:2535: $? = 0
configure:2538: test -s conftest.o
configure:2541: $? = 0
configure:2554: result: yes
configure:2560: checking whether cc accepts -g
configure:2581: cc -c -g -I/usr/local/include -I/usr/X11R6/include
conftest.c >&5
configure:2587: $? = 0
configure:2591: test -z
|| test ! -s conftest.err
configure:2594: $? = 0
configure:2597: test -s conftest.o
configure:2600: $? = 0
configure:2611: result: yes
configure:2628: checking for cc option to accept ANSI C
configure:2698: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:2704: $? = 0
configure:2708: test -z
|| test ! -s conftest.err
configure:2711: $? = 0
configure:2714: test -s conftest.o
configure:2717: $? = 0
configure:2735: result: none needed
configure:2753: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
conftest.c:2: error: syntax error before "me"
configure:2759: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:2903: checking for style of include used by gmake
configure:2931: result: GNU
configure:2959: checking dependency style of cc
configure:3042: result: gcc3
configure:3072: checking for a BSD-compatible install
configure:3127: result: /usr/bin/install -c -o root -g wheel
configure:3140: checking for strerror in -lcposix
configure:3170: cc -o conftest -O -pipe -I/usr/local/include
-I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib conftest.c
-lcposix >&5
/usr/bin/ld: cannot find -lcposix
configure:3176: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| /* end confdefs.h. */
|
| /* Override any gcc2 internal prototype to avoid an error. */
| #ifdef __cplusplus
| extern "C"
| #endif
| /* We use char because int might match the return type of a gcc2
| builtin and then its argument prototype would still apply. */
| char strerror ();
| int
| main ()
| {
| strerror ();
| ;
| return 0;
| }
configure:3202: result: no
configure:3282: checking whether gcc understands -Wno-sign-compare
configure:3300: cc -c -Wall -Wmissing-prototypes -Wnested-externs
-Wpointer-arith -O -pipe -Wno-sign-compare -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:3306: $? = 0
configure:3310: test -z
|| test ! -s conftest.err
configure:3313: $? = 0
configure:3316: test -s conftest.o
configure:3319: $? = 0
configure:3330: result: yes
configure:3350: checking what warning flags to pass to the C compiler
configure:3352: result: -Wall -Wmissing-prototypes -Wnested-externs
-Wpointer-arith -Wno-sign-compare
configure:3363: checking what language compliance flags to pass to the
C compiler
configure:3378: result:
configure:3466: checking build system type
configure:3484: result: i386-portbld-freebsd5.3
configure:3492: checking host system type
configure:3506: result: i386-portbld-freebsd5.3
configure:3514: checking for a sed that does not truncate output
configure:3568: result: /usr/bin/sed
configure:3571: checking for egrep
configure:3581: result: grep -E
configure:3597: checking for ld used by cc
configure:3664: result: /usr/bin/ld
configure:3673: checking if the linker (/usr/bin/ld) is GNU ld
configure:3688: result: yes
configure:3693: checking for /usr/bin/ld option to reload object files
configure:3700: result: -r
configure:3718: checking for BSD-compatible nm
configure:3760: result: /usr/bin/nm -B
configure:3764: checking whether ln -s works
configure:3768: result: yes
configure:3775: checking how to recognise dependent libraries
configure:3947: result: pass_all
configure:4160: checking how to run the C preprocessor
configure:4195: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c
configure:4201: $? = 0
configure:4233: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c
conftest.c:11:28: ac_nonexistent.h: No such file or directory
configure:4239: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4278: result: cc -E
configure:4302: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c
configure:4308: $? = 0
configure:4340: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c
conftest.c:11:28: ac_nonexistent.h: No such file or directory
configure:4346: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4390: checking for ANSI C header files
configure:4415: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4421: $? = 0
configure:4425: test -z
|| test ! -s conftest.err
configure:4428: $? = 0
configure:4431: test -s conftest.o
configure:4434: $? = 0
configure:4523: cc -o conftest -O -pipe -I/usr/local/include
-I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib conftest.c >&5
configure:4526: $? = 0
configure:4528: ./conftest
configure:4531: $? = 0
configure:4546: result: yes
configure:4570: checking for sys/types.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for sys/stat.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for stdlib.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for string.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for memory.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for strings.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for inttypes.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for stdint.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4570: checking for unistd.h
configure:4586: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4592: $? = 0
configure:4596: test -z
|| test ! -s conftest.err
configure:4599: $? = 0
configure:4602: test -s conftest.o
configure:4605: $? = 0
configure:4616: result: yes
configure:4642: checking dlfcn.h usability
configure:4654: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:4660: $? = 0
configure:4664: test -z
|| test ! -s conftest.err
configure:4667: $? = 0
configure:4670: test -s conftest.o
configure:4673: $? = 0
configure:4683: result: yes
configure:4687: checking dlfcn.h presence
configure:4697: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c
configure:4703: $? = 0
configure:4723: result: yes
configure:4758: checking for dlfcn.h
configure:4765: result: yes
configure:4872: checking for C++ compiler version
configure:4875: c++ --version </dev/null >&5
c++ (GCC) 3.4.2 [FreeBSD] 20040728
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4878: $? = 0
configure:4880: c++ -v </dev/null >&5
Using built-in specs.
Configured with: FreeBSD/i386 system compiler
Thread model: posix
gcc version 3.4.2 [FreeBSD] 20040728
configure:4883: $? = 0
configure:4885: c++ -V </dev/null >&5
c++: `-V' option must have argument
configure:4888: $? = 1
configure:4891: checking whether we are using the GNU C++ compiler
configure:4915: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.cc >&5
configure:4921: $? = 0
configure:4925: test -z
|| test ! -s conftest.err
configure:4928: $? = 0
configure:4931: test -s conftest.o
configure:4934: $? = 0
configure:4947: result: yes
configure:4953: checking whether c++ accepts -g
configure:4974: c++ -c -g -I/usr/local/include -I/usr/X11R6/include
conftest.cc >&5
configure:4980: $? = 0
configure:4984: test -z
|| test ! -s conftest.err
configure:4987: $? = 0
configure:4990: test -s conftest.o
configure:4993: $? = 0
configure:5004: result: yes
configure:5046: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.cc >&5
configure:5052: $? = 0
configure:5056: test -z
|| test ! -s conftest.err
configure:5059: $? = 0
configure:5062: test -s conftest.o
configure:5065: $? = 0
configure:5091: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.cc >&5
conftest.cc: In function `int main()':
conftest.cc:26: error: `exit' undeclared (first use this function)
conftest.cc:26: error: (Each undeclared identifier is reported only
once for each function it appears in.)
configure:5097: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:5046: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.cc >&5
configure:5052: $? = 0
configure:5056: test -z
|| test ! -s conftest.err
configure:5059: $? = 0
configure:5062: test -s conftest.o
configure:5065: $? = 0
configure:5091: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.cc >&5
configure:5097: $? = 0
configure:5101: test -z
|| test ! -s conftest.err
configure:5104: $? = 0
configure:5107: test -s conftest.o
configure:5110: $? = 0
configure:5135: checking dependency style of c++
configure:5218: result: gcc3
configure:5245: checking how to run the C++ preprocessor
configure:5276: c++ -E -I/usr/local/include -I/usr/X11R6/include conftest.cc
configure:5282: $? = 0
configure:5314: c++ -E -I/usr/local/include -I/usr/X11R6/include conftest.cc
conftest.cc:25:28: ac_nonexistent.h: No such file or directory
configure:5320: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5359: result: c++ -E
configure:5383: c++ -E -I/usr/local/include -I/usr/X11R6/include conftest.cc
configure:5389: $? = 0
configure:5421: c++ -E -I/usr/local/include -I/usr/X11R6/include conftest.cc
conftest.cc:25:28: ac_nonexistent.h: No such file or directory
configure:5427: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5524: checking for g77
configure:5553: result: no
configure:5524: checking for f77
configure:5540: found /usr/bin/f77
configure:5550: result: f77
configure:5565: checking for Fortran 77 compiler version
configure:5568: f77 --version </dev/null >&5
GNU Fortran (GCC) 3.4.2 [FreeBSD] 20040728
Copyright (C) 2004 Free Software Foundation, Inc.
GNU Fortran comes with NO WARRANTY, to the extent permitted by law.
You may redistribute copies of GNU Fortran
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING
or type the command `info -f g77 Copying'.
configure:5571: $? = 0
configure:5573: f77 -v </dev/null >&5
Using built-in specs.
Configured with: FreeBSD/i386 system compiler
Thread model: posix
gcc version 3.4.2 [FreeBSD] 20040728
configure:5576: $? = 0
configure:5578: f77 -V </dev/null >&5
f77: `-V' option must have argument
configure:5581: $? = 1
configure:5589: checking whether we are using the GNU Fortran 77 compiler
configure:5603: f77 -c conftest.F >&5
configure:5609: $? = 0
configure:5613: test -z
|| test ! -s conftest.err
configure:5616: $? = 0
configure:5619: test -s conftest.o
configure:5622: $? = 0
configure:5635: result: yes
configure:5641: checking whether f77 accepts -g
configure:5653: f77 -c -g conftest.f >&5
configure:5659: $? = 0
configure:5663: test -z
|| test ! -s conftest.err
configure:5666: $? = 0
configure:5669: test -s conftest.o
configure:5672: $? = 0
configure:5684: result: yes
configure:5714: checking the maximum length of command line arguments
configure:5793: result: 65536
configure:5804: checking command to parse /usr/bin/nm -B output from cc object
configure:5900: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:5903: $? = 0
configure:5907: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
configure:5910: $? = 0
configure:5962: cc -o conftest -O -pipe -I/usr/local/include
-I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib conftest.c
conftstm.o >&5
configure:5965: $? = 0
configure:6003: result: ok
configure:6007: checking for objdir
configure:6022: result: .libs
configure:6112: checking for ar
configure:6128: found /usr/bin/ar
configure:6139: result: ar
configure:6192: checking for ranlib
configure:6208: found /usr/bin/ranlib
configure:6219: result: ranlib
configure:6272: checking for strip
configure:6288: found /usr/bin/strip
configure:6299: result: strip
configure:6563: checking if cc static flag works
configure:6586: result: yes
configure:6604: checking if cc supports -fno-rtti -fno-exceptions
configure:6622: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++
but not for C
configure:6626: $? = 0
configure:6637: result: no
configure:6652: checking for cc option to produce PIC
configure:6839: result: -fPIC
configure:6847: checking if cc PIC flag -fPIC works
configure:6865: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include -fPIC -DPIC conftest.c >&5
configure:6869: $? = 0
configure:6880: result: yes
configure:6904: checking if cc supports -c -o file.o
configure:6925: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include -o out/conftest2.o conftest.c >&5
configure:6929: $? = 0
configure:6949: result: yes
configure:6975: checking whether the cc linker (/usr/bin/ld) supports
shared libraries
configure:7824: result: yes
configure:7850: checking whether -lc should be explicitly linked in
configure:7855: cc -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.c >&5
configure:7858: $? = 0
configure:7872: cc -shared conftest.o -v -Wl,-soname -Wl,conftest -o
conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1
configure:7875: $? = 1
configure:7887: result: yes
configure:7895: checking dynamic linker characteristics
configure:8456: result: freebsd5.3 ld.so
configure:8460: checking how to hardcode library paths into programs
configure:8485: result: immediate
configure:8499: checking whether stripping libraries is possible
configure:8504: result: yes
configure:9334: checking if libtool supports shared libraries
configure:9336: result: yes
configure:9339: checking whether to build shared libraries
configure:9360: result: yes
configure:9363: checking whether to build static libraries
configure:9367: result: yes
configure:9459: creating libtool
configure:10008: checking for ld used by c++
configure:10075: result: /usr/bin/ld
configure:10084: checking if the linker (/usr/bin/ld) is GNU ld
configure:10099: result: yes
configure:10150: checking whether the c++ linker (/usr/bin/ld)
supports shared libraries
configure:11017: result: yes
configure:11035: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include conftest.cc >&5
configure:11038: $? = 0
configure:11134: checking for c++ option to produce PIC
configure:11396: result: -fPIC
configure:11404: checking if c++ PIC flag -fPIC works
configure:11422: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include -fPIC -DPIC conftest.cc >&5
configure:11426: $? = 0
configure:11437: result: yes
configure:11461: checking if c++ supports -c -o file.o
configure:11482: c++ -c -O -pipe -I/usr/local/include
-I/usr/X11R6/include -o out/conftest2.o conftest.cc >&5
configure:11486: $? = 0
configure:11506: result: yes
configure:11532: checking whether the c++ linker (/usr/bin/ld)
supports shared libraries
configure:11557: result: yes
configure:11628: checking dynamic linker characteristics
configure:12189: result: freebsd5.3 ld.so
configure:12193: checking how to hardcode library paths into programs
configure:12218: result: immediate
configure:12232: checking whether stripping libraries is possible
configure:12237: result: yes
configure:13544: checking if libtool supports shared libraries
configure:13546: result: yes
configure:13549: checking whether to build shared libraries
configure:13567: result: yes
configure:13570: checking whether to build static libraries
configure:13574: result: yes
configure:13586: checking for f77 option to produce PIC
configure:13773: result: -fPIC
configure:13781: checking if f77 PIC flag -fPIC works
configure:13799: f77 -c -g -O2 -fPIC conftest.f >&5
configure:13803: $? = 0
configure:13814: result: yes
configure:13838: checking if f77 supports -c -o file.o
configure:13859: f77 -c -g -O2 -o out/conftest2.o conftest.f >&5
configure:13863: $? = 0
configure:13883: result: yes
configure:13909: checking whether the f77 linker (/usr/bin/ld)
supports shared libraries
configure:14738: result: yes
configure:14809: checking dynamic linker characteristics
configure:15370: result: freebsd5.3 ld.so
configure:15374: checking how to hardcode library paths into programs
configure:15399: result: immediate
configure:15413: checking whether stripping libraries is possible
configure:15418: result: yes
configure:19543: checking for pkg-config
configure:19561: found /usr/local/bin/pkg-config
configure:19574: result: /usr/local/bin/pkg-config
configure:19591: checking for bonobo-activation-2.0 >= 0.9.1
libbonobo-2.0 >= 1.97.0 ORBit-2.0 >= 2.3.94
configure:19595: result: yes
configure:19599: checking gnome_speech_CFLAGS
configure:19602: result: -DORBIT2=1 -D_REENTRANT
-I/usr/local/include/bonobo-activation-2.0
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/orbit-2.0 -I/usr/local/include/libbonobo-2.0
configure:19605: checking gnome_speech_LIBS
configure:19608: result: -Wl,--export-dynamic -pthread
-L/usr/local/lib -lbonobo-2 -lbonobo-activation -lORBit-2 -lm
-lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -liconv
configure:19664: checking for eciNew in -libmeci
configure:19694: cc -o conftest -O -pipe -I/usr/local/include
-I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib conftest.c
-libmeci >&5
/usr/bin/ld: cannot find -libmeci
configure:19700: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h. */
|
| /* Override any gcc2 internal prototype to avoid an error. */
| #ifdef __cplusplus
| extern "C"
| #endif
| /* We use char because int might match the return type of a gcc2
| builtin and then its argument prototype would still apply. */
| char eciNew ();
| int
| main ()
| {
| eciNew ();
| ;
| return 0;
| }
configure:19726: result: no
configure:19758: checking for TextToSpeechSync in -ltts
configure:19788: cc -o conftest -O -pipe -I/usr/local/include
-I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib conftest.c
-ltts >&5
/usr/bin/ld: cannot find -ltts
configure:19794: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "gnome-speech"
| #define VERSION "0.3.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h. */
|
| /* Override any gcc2 internal prototype to avoid an error. */
| #ifdef __cplusplus
| extern "C"
| #endif
| /* We use char because int might match the return type of a gcc2
| builtin and then its argument prototype would still apply. */
| char TextToSpeechSync ();
| int
| main ()
| {
| TextToSpeechSync ();
| ;
| return 0;
| }
configure:19820: result: no
configure:19855: checking for "/bin/theta-config"
configure:19870: result: no
configure:19938: checking for "/usr/local/bin/java"
configure:19953: result: yes
configure:20006: checking for "/usr/local/bin/javac"
configure:20021: result: yes
## ---------------- ##
## Cache variables. ##
## ---------------- ##
lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[
]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][
]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'\''"'
ac_cv_prog_ac_ct_F77=f77
am_cv_CC_dependencies_compiler_type=gcc3
ac_cv_prog_CXXCPP='c++ -E'
ac_cv_env_CXXFLAGS_value='-O -pipe'
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern
int \1;/p'\'''
ac_cv_f77_compiler_gnu=yes
ac_cv_env_F77_value=
ac_cv_header_stdlib_h=yes
lt_cv_file_magic_cmd='$MAGIC_CMD'
ac_cv_file__usr_local_bin_java=yes
lt_cv_prog_gnu_ldcxx=yes
ac_cv_lib_cposix_strerror=no
ac_cv_prog_cc_g=yes
ac_cv_env_CXXCPP_set=
ac_cv_env_LDFLAGS_set=set
ac_cv_path_PKG_CONFIG=/usr/local/bin/pkg-config
lt_cv_prog_compiler_c_o_CXX=yes
ac_cv_prog_ac_ct_AR=ar
ac_cv_c_compiler_gnu=yes
ac_cv_exeext=
ac_cv_env_CFLAGS_set=set
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^
]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\)
\([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .*
\\(.*\\)\$/extern int \\1;/p'\''"'
ac_cv_prog_make_gmake_set=yes
ac_cv_env_FFLAGS_set=
lt_cv_sys_max_cmd_len=65536
ac_cv_env_CPP_value=
ac_cv_env_CPPFLAGS_set=set
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CXX_set=set
lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
ac_cv_env_host_alias_set=
lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^:
\\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST]
\\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
ac_cv_lib_ibmeci_eciNew=no
lt_cv_ld_reload_flag=-r
lt_cv_prog_gnu_ld=yes
ac_cv_header_sys_stat_h=yes
ac_cv_gnome_aclocal_dir=
ac_cv_env_build_alias_set=set
lt_cv_prog_compiler_c_o=yes
ac_cv_prog_f77_g=yes
ac_cv_env_CXXCPP_value=
ac_cv_env_LDFLAGS_value='-L/usr/local/lib -L/usr/X11R6/lib'
ac_cv_env_target_alias_set=
ac_cv_host_alias=i386-portbld-freebsd5.3
ac_cv_prog_cc_stdc=
ac_cv_env_CFLAGS_value='-O -pipe '
ac_cv_env_CC_set=set
ac_cv_file__bin_theta_config=no
lt_cv_prog_compiler_c_o_F77=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_stdc=yes
ac_cv_header_strings_h=yes
lt_cv_path_SED=/usr/bin/sed
ac_cv_header_stdint_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_prog_egrep='grep -E'
ac_cv_env_FFLAGS_value=
lt_cv_path_LD=/usr/bin/ld
lt_cv_prog_compiler_rtti_exceptions=no
ac_cv_header_unistd_h=yes
ac_cv_header_string_h=yes
ac_cv_build_alias=i386-portbld-freebsd5.3
ac_cv_env_CPPFLAGS_value='-I/usr/local/include -I/usr/X11R6/include'
ac_cv_file__usr_local_bin_javac=yes
lt_lt_cv_prog_compiler_c_o='"yes"'
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_header_memory_h=yes
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXX_value=c++
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_host=i386-portbld-freebsd5.3
ac_cv_env_F77_set=
ac_cv_env_host_alias_value=
lt_lt_cv_prog_compiler_c_o_F77='"yes"'
ac_cv_gnome_aclocal_flags=
lt_cv_objdir=.libs
ac_cv_prog_cxx_g=yes
ac_cv_lib_tts_TextToSpeechSync=no
lt_cv_file_magic_test_file=
am_cv_CXX_dependencies_compiler_type=gcc3
ac_cv_prog_CPP='cc -E'
ac_cv_build=i386-portbld-freebsd5.3
ac_cv_prog_AWK=nawk
ac_cv_env_build_alias_value=i386-portbld-freebsd5.3
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'\'''
lt_cv_deplibs_check_method=pass_all
ac_cv_prog_ac_ct_CC=cc
lt_cv_path_LDCXX=/usr/bin/ld
ac_cv_env_target_alias_value=
ac_cv_env_CC_value=cc
lt_cv_path_NM='/usr/bin/nm -B'
ac_cv_env_CPP_set=
ac_cv_header_dlfcn_h=yes
ac_cv_objext=o
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL}
/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/missing
--run aclocal-1.7 '
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL}
/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/missing
--run tar'
AR='ar'
AUTOCONF='${SHELL}
/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/missing
--run autoconf'
AUTOHEADER='${SHELL}
/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/missing
--run autoheader'
AUTOMAKE='${SHELL}
/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/missing
--run automake-1.7'
AWK='nawk'
BONOBO_ACTIVATION_IDL_DIR='/usr/local/share/idl/bonobo-activation-2.0'
BUILD_DECTALK_DRIVER_FALSE=''
BUILD_DECTALK_DRIVER_TRUE='#'
BUILD_ELOQUENCE_DRIVER_FALSE=''
BUILD_ELOQUENCE_DRIVER_TRUE='#'
BUILD_FREETTS_DRIVER_FALSE=''
BUILD_FREETTS_DRIVER_LINUX_FALSE=''
BUILD_FREETTS_DRIVER_LINUX_TRUE=''
BUILD_FREETTS_DRIVER_SOLARIS_FALSE=''
BUILD_FREETTS_DRIVER_SOLARIS_TRUE=''
BUILD_FREETTS_DRIVER_TRUE=''
BUILD_JAVA_PACKAGE=''
BUILD_JAVA_PACKAGE_FALSE=''
BUILD_JAVA_PACKAGE_TRUE=''
BUILD_THETA_DRIVER_FALSE=''
BUILD_THETA_DRIVER_TRUE='#'
BUILD_VIAVOICE_DRIVER_FALSE=''
BUILD_VIAVOICE_DRIVER_TRUE='#'
CC='cc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-O -pipe '
CPP='cc -E'
CPPFLAGS='-I/usr/local/include -I/usr/X11R6/include'
CXX='c++'
CXXCPP='c++ -E'
CXXDEPMODE='depmode=gcc3'
CXXFLAGS='-O -pipe'
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='grep -E'
EXEEXT=''
F77='f77'
FFLAGS='-g -O2'
FREETTS_CLASSPATH=''
FREETTS_DRIVER_CLASSPATH=''
FREETTS_DRIVER_JAR_DIR=''
FREETTS_JAR_DIR=''
GNOME_ACLOCAL_DIR=''
GNOME_ACLOCAL_FLAGS=''
GNOME_SPEECH_BINARY_AGE='0'
GNOME_SPEECH_CLASSPATH=''
GNOME_SPEECH_INSTALLED_CLASSPATH=''
GNOME_SPEECH_INTERFACE_AGE='0'
GNOME_SPEECH_JAR_DIR=''
GNOME_SPEECH_MAJOR_VERSION='0'
GNOME_SPEECH_MICRO_VERSION='6'
GNOME_SPEECH_MINOR_VERSION='3'
IDLJ=''
INSIDE_GNOME_DOCU_FALSE=''
INSIDE_GNOME_DOCU_TRUE='#'
INSTALL_DATA='install -o root -g wheel -m 444'
INSTALL_PROGRAM='install -s -o root -g wheel -m 555'
INSTALL_SCRIPT='install -o root -g wheel -m 555'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
JAB=''
JAR=''
JAVA='/usr/local/bin/java'
JAVAC='/usr/local/bin/javac'
JAVAH=''
JAVA_HOME='/usr/local'
JAVA_SUPPORT=''
LDFLAGS='-L/usr/local/lib -L/usr/X11R6/lib'
LIBBONOBO_IDL_DIR='/usr/local/share/idl/bonobo-2.0'
LIBOBJS=''
LIBS=''
LIBTOOL='$(SHELL) /usr/local/bin/libtool15'
LN_S='ln -s'
LTLIBOBJS=''
LT_AGE='0'
LT_CURRENT='7'
LT_RELEASE=''
LT_REVISION='1'
LT_VERSION_INFO='-version-info ${LT_CURRENT}:${LT_REVISION}:${LT_AGE}'
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL}
/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/missing
--run makeinfo'
OBJEXT='o'
ORBIT_IDL='/usr/local/bin/orbit-idl-2'
PACKAGE='gnome-speech'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PKG_CONFIG='/usr/local/bin/pkg-config'
RANLIB='ranlib'
SET_MAKE=''
SHELL='/bin/sh'
STRIP='strip'
VERSION='0.3.6'
WARN_CFLAGS='-Wall -Wmissing-prototypes -Wnested-externs
-Wpointer-arith -Wno-sign-compare '
ac_ct_AR='ar'
ac_ct_CC='cc'
ac_ct_CXX=''
ac_ct_F77='f77'
ac_ct_RANLIB='ranlib'
ac_ct_STRIP='strip'
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE='#'
am__fastdepCXX_TRUE=''
am__include='include'
am__leading_dot='.'
am__quote=''
bindir='${exec_prefix}/bin'
build='i386-portbld-freebsd5.3'
build_alias='i386-portbld-freebsd5.3'
build_cpu='i386'
build_os='freebsd5.3'
build_vendor='portbld'
datadir='${prefix}/share'
dectalk_INCLUDES=''
dectalk_LIBS=''
eloquence_INCLUDEDIR=''
eloquence_LIBDIR=''
exec_prefix='NONE'
gnome_speech_CFLAGS='-DORBIT2=1 -D_REENTRANT
-I/usr/local/include/bonobo-activation-2.0
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/orbit-2.0 -I/usr/local/include/libbonobo-2.0 '
gnome_speech_LIBS='-Wl,--export-dynamic -pthread -L/usr/local/lib
-lbonobo-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0
-lgthread-2.0 -lglib-2.0 -liconv '
host='i386-portbld-freebsd5.3'
host_alias=''
host_cpu='i386'
host_os='freebsd5.3'
host_vendor='portbld'
includedir='${prefix}/include'
infodir='${prefix}/info'
install_sh='/usr/ports/accessibility/gnomespeech/work/gnome-speech-0.3.6/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
prefix='/usr/local'
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
theta_INCLUDES=''
theta_LIBS=''
viavoice_INCLUDES='-I/opt/IBM/ibmtts/inc'
viavoice_LIBS=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define HAVE_DLFCN_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STDINT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRINGS_H 1
#define HAVE_STRING_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_UNISTD_H 1
#define PACKAGE "gnome-speech"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define STDC_HEADERS 1
#define VERSION "0.3.6"
#endif
#ifdef __cplusplus
extern "C" void std::exit (int) throw (); using std::exit;
configure: exit 1
and also the ls /var/db/pkg
ORBit2-2.12.1_1
amspsfnt-1.0_1
antlr-2.7.4
apache-ant-1.6.2
apr-nothr-gdbm-db4-1.0.1_1
aspell-0.60.2
at-spi-1.6.3_1
atk-1.9.1
autoconf-2.59_2
bison-1.75_2
bitstream-vera-1.10_1
bugbuddy-2.10.0_1
ccache-2.4_1
cdparanoia-3.9.8_7
cjk-cdrtools-2.01.20041227
cmpsfont-1.0_2
compat4x-i386-5.3
coreutils-5.2.1
cups-1.1.23.0
cups-base-1.1.23.0_3
cups-lpr-1.1.23.0
cups-pstoraster-7.07_3
cvsup-16.1h
cvsup-without-gui-16.1h
db42-4.2.52_3
desktop-file-utils-0.10_2
djbfft-0.76_1
docbook-sk-4.1.2_3
docbook-xml-4.2_1
docbook-xsl-1.68.1
dri-6.2.1,2
dvipsk-tetex-5.95a_1
eel-2.10.0
eog-2.9.0_1
esound-0.2.35_1
expat-1.95.8
fam-2.6.9_6
fastest_cvsup-0.2.9
fileroller-2.10.0_1,1
fontconfig-2.2.3,1
freetype2-2.1.9
fribidi-0.10.4_1
gail-1.8.2_1
gconf-editor-2.10.0,1
gconf2-2.10.0
gd-2.0.33_1,1
gdbm-1.8.3_1
gdm-2.6.0.8_1
gedit-2.10.0_1
gettext-0.14.1
ggv-2.8.4_2
ghc-6.4_1
ghostscript-afpl-8.50,1
gimp-print-4.2.7_1
gle-3.0.3
glib-2.6.3_1
gmake-3.80_2
gnome-icon-theme-2.10.0
gnome-menus-2.10.0
gnome-themes-2.10.0
gnomeapplets2-2.10.0_1
gnomeaudio2-2.0.0
gnomedesktop-2.10.0
gnomedocutils-0.1.3
gnomegames2-2.10.0_1
gnomehier-2.0_6
gnomekeyring-0.4.2
gnomemedia2-2.10.0_3
gnomemimedata-2.4.2
gnomepanel-2.10.0_1
gnomesession-2.10.0
gnomesystemmonitor-2.10.0
gnomesystemtools-1.2.0_2
gnometerminal-2.10.0_1
gnomeuserdocs2-2.8.1
gnomeutils2-2.10.0,1
gnomevfs2-2.10.0_1
gnutls-1.0.24_1
gsfonts-8.11_2
gstreamer-0.8.9_2
gstreamer-ffmpeg-0.8.4
gstreamer-plugins-0.8.8_3
gstreamer-plugins-cdparanoia-0.8.8_3
gstreamer-plugins-esound-0.8.8_3
gstreamer-plugins-gconf-0.8.8_3
gtar-1.15.1_1
gtk-2.6.4_1
gtk-engines2-2.6.2
gtksourceview-1.2.0_1
gucharmap-gnome-1.4.3_1
guile-1.6.5
help2man-1.35.1
hicolor-icon-theme-0.5
imake-6.8.2
imwheel-1.0.0.p12
intltool-0.33
javacc-3.2_1
javavmwrapper-2.0_3
jdk-1.5.0p1
jpeg-6b_3
lcms-1.14,1
libIDL-0.8.5_1
libXft-2.1.6
liba52-0.7.4_1
libart_lgpl2-2.3.17
libaudiofile-0.2.6
libbonobo-2.8.1_1
libcroco-0.6.0_1
libdts-0.0.2
libdvdcss-1.2.8_1
libdvdnav-0.1.9_1
libdvdread-0.9.4_1
libexif-0.6.10
libgail-gnome-1.1.0_1
libgcrypt-1.2.1
libglade2-2.5.1_2
libglut-6.0.1
libgmp-4.1.4
libgnome-2.10.0
libgnomecanvas-2.10.0_1
libgnomecups-0.2.0_1,1
libgnomeprint-2.10.1
libgnomeprintui-2.10.1
libgnomeui-2.10.0_1
libgpg-error-1.0_1
libgsf-1.11.1
libgtop2-2.10.0_1
libiconv-1.9.2_1
libid3tag-0.15.0b_2
libijs-0.35
libltdl-1.5.10
libmad-0.15.1b_1
libmng-1.0.8
libogg-1.1.2_1,3
librsvg2-2.9.5_2
libsoup-2.2.3
libtool-1.3.5_2
libtool-1.5.10_1
libvorbis-1.1.0_1,3
libwmf-0.2.8.3
libwnck-2.10.0
libwww-5.4.0_1
libxklavier-2.0_2,1
libxml2-2.6.18
libxslt-1.1.13
linc-1.0.3_3
linux_base-8-8.0_6
lynx-ssl-2.8.5
m4-1.4.1
metacity-2.10.0
mozilla-1.7.5_2,2
nautilus-cd-burner-2.10.0
nautilus2-2.10.0_1
neon-0.24.7
nspr-4.4.1_1
nss-3.9.2
open-motif-2.2.3_1
openldap-client-2.2.23
openssl-0.9.7e_2
p5-XML-Parser-2.34_1
p5-gettext-1.03
p5-type1inst-0.6.1_2
pango-1.8.1
perl-5.8.6_2
pkg_cutleaves-20040517
pkg_tree-1.1_1
pkgconfig-0.15.0_1
pkgdb.db
png-1.2.8_1
popt-1.7
port-maintenance-tools-1.0
portdowngrade-0.6
porteasy-2.8.3
portell-0.1_4
portmanager-0.2.9_3
portupgrade-20041226_1
ppower4-0.9.4_1
prosper-1.00.4_2
psiconv-0.9.7
py24-numeric-23.7
py24-xml-0.8.4
python-2.4_1
ruby-1.8.2_3
ruby18-bdb1-0.2.2
samba-libsmbclient-3.0.12_1
screen-4.0.2_1
scrollkeeper-0.3.14_1,1
sdocbook-xml-4.1.2.5_2
shared-mime-info-0.15_9
startup-notification-0.8_1
subversion-1.1.3
sudo-1.6.8.7
system-tools-backends-1.2.0
t1lib-5.0.1,1
tcshrc-1.6.0
teTeX-3.0
teTeX-base-3.0_3
teTeX-texmf-3.0_1
tex-texmflocal-1.9
texi2html-1.76_1,1
tiff-3.7.1_2
unzip-5.52_1
urwfonts-1.0
vte-0.11.12_1
wv-1.0.0_2
xdvik-tetex-22.84.8_1
xmlcatmgr-2.2
xorg-6.8.2
xorg-clients-6.8.2
xorg-documents-6.8.2
xorg-fonts-100dpi-6.8.2
xorg-fonts-75dpi-6.8.2
xorg-fonts-cyrillic-6.8.2
xorg-fonts-encodings-6.8.2
xorg-fonts-miscbitmaps-6.8.2
xorg-fonts-truetype-6.8.2
xorg-fonts-type1-6.8.2
xorg-fontserver-6.8.2
xorg-libraries-6.8.2
xorg-nestserver-6.8.2
xorg-printserver-6.8.2
xorg-server-6.8.2
xorg-vfbserver-6.8.2
xscreensaver-gnome-4.20_1
xterm-200_2
xvid-1.0.3,1
yelp-2.9.3_2
zip-2.3_2
finally here is the output of uname -a
FreeBSD pc078650.sci.griffith.edu.au 5.3-RELEASE-p1 FreeBSD
5.3-RELEASE-p1 #7: Tue Nov 23 11:49:52 EST 2004
tim at pc078650.sci.griffith.edu.au:/usr/obj/usr/src/sys/KERNCONF i386
any help would be greatly appreciated,
Tim
More information about the freebsd-gnome
mailing list