gnome 2.9.91, ports numbering strangeness...

Jeffrey Racine racinej at mcmaster.ca
Tue Feb 15 06:55:35 PST 2005 

Hi.

I recently took the plunge to upgrade to gnome 2.9.91 with Marcus' cvs
script. Things are running quite well. However, when I updated my ports
tree after things were all over and ran portupgrade -ary, I am observing
some strangeness. Thanks in advance for any suggestions...

1) First, I noticed that pkg_version -l '<' -v yields incorrect updating
info for fileroller...

fileroller-2.9.91                   <   needs updating (port has
2.8.4,1)

2) When I upgrade gstreamer-plugins that correctly reports, 

gstreamer-plugins-0.8.7             <   needs updating (port has
0.8.7_1)

it remakes glib (it ought not?, and reports incorrectly that an older
version is installed) stopping with the message

===>  Installing for glib-2.4.8
===>   glib-2.4.8 depends on file: /usr/local/bin/perl5.8.6 - found
===>   glib-2.4.8 depends on executable: pkg-config - found
===>   Generating temporary packing list
===>  Checking if devel/glib20 already installed
===>   An older version of devel/glib20 is already installed
(glib-2.6.2)
      You may wish to ``make deinstall'' and install this port again
      by ``make reinstall'' to upgrade it properly.
      If you really wish to overwrite the old port of devel/glib20
      without deleting it first, set the variable "FORCE_PKG_REGISTER"
      in your environment or the "make install" command line.

Some system info:

uname -a
FreeBSD pc-racine1.McMaster.CA 6.0-CURRENT FreeBSD 6.0-CURRENT #0: Mon
Feb  7 11:05:50 EST 2005
root at pc-racine1.McMaster.CA:/usr/obj/usr/src/sys/OPTIPLEX  i386

pc-racine1# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-CURRENT #0: Mon Feb  7 11:05:50 EST 2005
    root at pc-racine1.McMaster.CA:/usr/obj/usr/src/sys/OPTIPLEX
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2137546752 (2038 MB)
avail memory = 2086993920 (1990 MB)
ACPI APIC Table: <DELL   SX280  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL SX280  > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem
0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:43:9e:a3:4a
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xff80-0xff9f irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Sony USB Floppy Drive, rev 1.10/5.01, addr 2
uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00,
addr 3
uhub1: 4 ports with 4 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xff60-0xff7f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3: Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 2
uhub3: 3 ports with 2 removable, bus powered
ukbd0: Dell Dell USB Keyboard Hub, rev 1.10/2.00, addr 3, iclass 3/1
kbd1 at ukbd0
uhid0: Dell Dell USB Keyboard Hub, rev 1.10/2.00, addr 3, iclass 3/1
ums0: vendor 0x413c product 0x3010, rev 2.00/2.20, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xff20-0xff3f irq 23 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcm0: <Intel ICH6 (82801FB)> port 0xe8c0-0xe8ff,0xec00-0xecff mem
0xdfebfd00-0xdfebfdff,0xdfebfe00-0xdfebffff irq 23 at device 30.2 on
pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 31.1
on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH6 SATA150 controller> port
0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07
irq 20 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link3: <ACPI PCI Link LNKD> on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 9 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 10 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 9 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 3 on acpi0
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on
acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xca800-0xcbfff,0xc0000-0xca7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 1.000 msec
ad4: 238418MB <Maxtor 7Y250M0/YAR51HW0> [484406/16/63] at ata2-master
SATA150
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SONY USB-FDU 5.01> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Trying to mount root from ufs:/dev/ad4s1a
bge0: link state changed to UP
ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
ucom0: at uhub5 port 1 (addr 2) disconnected
All threads purged from cuaU0
All threads purged from ttyU0
ucom0: detached


-- 
Professor J. S. Racine         Phone:  (905) 525 9140 x 23825
Department of Economics        FAX:    (905) 521-8232
McMaster University            e-mail: racinej at mcmaster.ca
1280 Main St. W.,Hamilton,     URL:    http://www.economics.mcmaster.ca/racine/
Ontario, Canada. L8S 4M4

`The generation of random numbers is too important to be left to
chance.'

More information about the freebsd-gnome mailing list