I need some help if possible (ORBit)

[Joe Marcus Clarke]

On Sat, 2004-03-27 at 10:14, Jean-Yves Lignier wrote:
> Hello,
> 
> I encountered some problems while trying to compile the sources of 
> "mozilla-firebird".
> It seems that it comes from bus CORBA.
> In this e-mail, I am enclosing the logs of compilation.
> I thank you by advance for the assistance which you will want to bring 
> to me well.

You need to install the latest version of devel/popt.  I would also
highly recommend you cvsup your ports tree as firebird is now gone, and
replaced with firefox (0.8).

Joe

> 
> Jean-Yves
> 
> ______________________________________________________________________
> ===>  Extracting for mozilla-firebird-0.6.1_1
> >> Checksum OK for MozillaFirebird-source-0.6.1.tar.bz2.
> 
> Extracting source (this takes a while) ...
> 
> ===>  Patching for mozilla-firebird-0.6.1_1
> ===>  Applying FreeBSD patches for mozilla-firebird-0.6.1_1
> ===>   mozilla-firebird-0.6.1_1 depends on executable: zip - found
> ===>   mozilla-firebird-0.6.1_1 depends on executable: freetype-config - found
> ===>   mozilla-firebird-0.6.1_1 depends on executable: gmake - found
> ===>   mozilla-firebird-0.6.1_1 depends on executable: pkg-config - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: jpeg.9 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: png.5 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: mng.1 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: freetype.9 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: iconv.3 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: nspr4.1 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: Xft.2 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: X11.6 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: glib12.3 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: gtk12.2 - found
> ===>   mozilla-firebird-0.6.1_1 depends on shared library: ORBit.2 - not found
> ===>    Verifying install for ORBit.2 in /usr/ports/devel/ORBit
> ===>  Extracting for ORBit-0.5.17_1
> >> Checksum OK for gnome/ORBit-0.5.17.tar.bz2.
> ===>  Patching for ORBit-0.5.17_1
> ===>  Applying FreeBSD patches for ORBit-0.5.17_1
> ===>   ORBit-0.5.17_1 depends on executable: gmake - found
> ===>   ORBit-0.5.17_1 depends on file: /usr/local/libexec/libtool13/libtool - found
> ===>   ORBit-0.5.17_1 depends on executable: pkg-config - found
> ===>   ORBit-0.5.17_1 depends on shared library: intl.5 - found
> ===>   ORBit-0.5.17_1 depends on shared library: glib12.3 - found
> ===>  Configuring for ORBit-0.5.17_1
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix... 
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking how to run the C preprocessor... cc -E
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking for indentation command to pipe generated c-files through... cat
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >= 1.2.1... yes
> checking for bison... no
> checking for byacc... byacc
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for mawk... no
> checking for gawk... no
> checking for nawk... nawk
> checking for ANSI C header files... yes
> checking for fcntl.h... yes
> checking for unistd.h... yes
> checking for sys/endian.h... yes
> checking for endian.h... no
> checking for machine/endian.h... yes
> checking for sys/machine.h... no
> checking for sys/isa_defs.h... no
> checking for sys/poll.h... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> checking for wctype.h... yes
> checking for machine/types.h... yes
> checking for tcpd.h... yes
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for size_t... yes
> checking for vprintf... yes
> checking for _doprnt... no
> checking for poll... yes
> checking for basename... yes
> checking for socket... yes
> checking for gethostbyname... yes
> checking for socklen_t... yes
> checking "whether to use TCP wrappers"... yes
> checking for inet_aton... yes
> checking whether byte ordering is bigendian... no
> checking how many vectors writev is capable to handle... 
> 1024
> checking alignment of CORBA_short... 2
> checking alignment of CORBA_long... 4
> checking alignment of CORBA_unsigned_short... 2
> checking alignment of CORBA_unsigned_long... 4
> checking alignment of CORBA_float... 4
> checking alignment of CORBA_double... 4
> checking alignment of CORBA_char... 1
> checking alignment of CORBA_boolean... 1
> checking alignment of CORBA_octet... 1
> checking alignment of CORBA_long_double... 4
> checking alignment of CORBA_wchar... 2
> checking alignment of CORBA_long_long... 4
> checking alignment of CORBA_unsigned_long_long... 4
> checking alignment of CORBA_struct... 1
> checking alignment of CORBA_pointer... 4
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating orbit-config
> config.status: creating src/Makefile
> config.status: creating src/ORBitutil/Makefile
> config.status: creating src/ORBitutil/orbit-os-config.h
> config.status: creating src/IIOP/Makefile
> config.status: creating src/orb/orbit.h
> config.status: creating src/orb/Makefile
> config.status: creating src/orbit-idl-compiler/Makefile
> config.status: creating src/orbit-idl-compiler/backends/Makefile
> config.status: creating src/orbit-idl-compiler/backends/c/Makefile
> config.status: creating src/services/Makefile
> config.status: creating src/services/name/Makefile
> config.status: creating src/services/event/Makefile
> config.status: creating src/daemons/Makefile
> config.status: creating src/daemons/interface_repository/Makefile
> config.status: creating test/Makefile
> config.status: creating test/idl/Makefile
> config.status: creating test/test-poa/Makefile
> config.status: creating test/everything/Makefile
> config.status: creating ORBit.pc
> config.status: creating ORBit.spec
> config.status: creating config.h
> configure: configuring in libIDL
> configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix... 
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking if C preprocessor likes IDL... yes
> checking if C preprocessor can read from stdin... yes
> checking how to ignore standard include path... 
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for bison... no
> checking for byacc... byacc
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking for glib-config... yes
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >= 1.2.0... yes
> checking for ANSI C header files... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating Makefile.msc
> config.status: creating libIDL-config
> config.status: creating libIDL.m4
> config.status: creating libIDL.spec
> config.status: creating libIDL.pc
> config.status: creating IDL.h.new
> IDL.h is unchanged
> 
> libIDL 0.6.8 configuration complete
> 
>   Flex installed: yes
>   C Preprocessor: "cc -E"
>   Standard input supported.
> 
> configure: configuring in popt
> configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking target system type... i386-portbld-freebsd4.9
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix... 
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking whether cc needs -traditional... no
> checking for cc option to accept ANSI C... none needed
> checking for function prototypes... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... no
> checking whether to build static libraries... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking for alloca.h... no
> checking for libintl.h... yes
> checking for mcheck.h... no
> checking for unistd.h... yes
> checking for /usr/ucblib in LIBS... no
> checking for GNU xgettext... yes
> checking for strerror... yes
> checking for mtrace... no
> checking for setreuid... yes
> checking for ranlib... (cached) ranlib
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for off_t... yes
> checking for size_t... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking whether we are using the GNU C Library 2.1 or newer... no
> checking for argz.h... no
> checking for limits.h... yes
> checking for locale.h... yes
> checking for nl_types.h... yes
> checking for malloc.h... yes
> checking for stddef.h... yes
> checking for stdlib.h... (cached) yes
> checking for string.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... yes
> checking for feof_unlocked... no
> checking for fgets_unlocked... no
> checking for getcwd... yes
> checking for getegid... yes
> checking for geteuid... yes
> checking for getgid... yes
> checking for getuid... yes
> checking for mempcpy... no
> checking for munmap... yes
> checking for putenv... yes
> checking for setenv... yes
> checking for setlocale... yes
> checking for stpcpy... no
> checking for strchr... yes
> checking for strcasecmp... yes
> checking for strdup... yes
> checking for strtoul... yes
> checking for tsearch... yes
> checking for __argz_count... no
> checking for __argz_stringify... no
> checking for __argz_next... no
> checking for iconv... yes
> checking for iconv declaration... 
>          extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
> checking for nl_langinfo and CODESET... yes
> checking for LC_MESSAGES... yes
> checking whether NLS is requested... yes
> checking whether included gettext is requested... no
> checking for libintl.h... (cached) yes
> checking for GNU gettext in libc... no
> checking for GNU gettext in libintl... yes
> checking for dcgettext... yes
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for bison... no
> checking for catalogs to be installed...  da cs el gl ro sk uk wa zh_CN.GB2312
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating intl/Makefile
> config.status: creating po/Makefile.in
> config.status: creating config.h
> ===>  Building for ORBit-0.5.17_1
> gmake  all-recursive
> gmake[1]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> Making all in popt
> gmake[2]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake  all-recursive
> gmake[3]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> Making all in intl
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
> Making all in po
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
> ( if test 'x.' != 'x.'; then \
>     posrcprefix='../'; \
>   else \
>     posrcprefix="../"; \
>   fi; \
>   rm -f POTFILES-t POTFILES \
>     && (sed -e '/^#/d' -e '/^[ 	]*$/d' \
> 	    -e "s at .*@	$posrcprefix& \\\\@" < ./POTFILES.in \
> 	| sed -e '$s/\\$//') > POTFILES-t \
>     && chmod a-w POTFILES-t \
>     && mv POTFILES-t POTFILES )
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> /bin/sh ./libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I. -I.  -I/usr/local/include  -Wall -O -pipe  -c popt.c
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake[3]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake[2]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake[1]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> *** Error code 2
> 
> Stop in /usr/ports/devel/ORBit.
> *** Error code 1
> 
> Stop in /usr/ports/www/mozilla-firebird.
> 
> ______________________________________________________________________
> ===>  Extracting for ORBit-0.5.17_1
> >> Checksum OK for gnome/ORBit-0.5.17.tar.bz2.
> ===>  Patching for ORBit-0.5.17_1
> ===>  Applying FreeBSD patches for ORBit-0.5.17_1
> ===>   ORBit-0.5.17_1 depends on executable: gmake - found
> ===>   ORBit-0.5.17_1 depends on file: /usr/local/libexec/libtool13/libtool - found
> ===>   ORBit-0.5.17_1 depends on executable: pkg-config - found
> ===>   ORBit-0.5.17_1 depends on shared library: intl.5 - found
> ===>   ORBit-0.5.17_1 depends on shared library: glib12.3 - found
> ===>  Configuring for ORBit-0.5.17_1
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix... 
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking how to run the C preprocessor... cc -E
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking for indentation command to pipe generated c-files through... cat
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >= 1.2.1... yes
> checking for bison... no
> checking for byacc... byacc
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for mawk... no
> checking for gawk... no
> checking for nawk... nawk
> checking for ANSI C header files... yes
> checking for fcntl.h... yes
> checking for unistd.h... yes
> checking for sys/endian.h... yes
> checking for endian.h... no
> checking for machine/endian.h... yes
> checking for sys/machine.h... no
> checking for sys/isa_defs.h... no
> checking for sys/poll.h... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> checking for wctype.h... yes
> checking for machine/types.h... yes
> checking for tcpd.h... yes
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for size_t... yes
> checking for vprintf... yes
> checking for _doprnt... no
> checking for poll... yes
> checking for basename... yes
> checking for socket... yes
> checking for gethostbyname... yes
> checking for socklen_t... yes
> checking "whether to use TCP wrappers"... yes
> checking for inet_aton... yes
> checking whether byte ordering is bigendian... no
> checking how many vectors writev is capable to handle... 
> 1024
> checking alignment of CORBA_short... 2
> checking alignment of CORBA_long... 4
> checking alignment of CORBA_unsigned_short... 2
> checking alignment of CORBA_unsigned_long... 4
> checking alignment of CORBA_float... 4
> checking alignment of CORBA_double... 4
> checking alignment of CORBA_char... 1
> checking alignment of CORBA_boolean... 1
> checking alignment of CORBA_octet... 1
> checking alignment of CORBA_long_double... 4
> checking alignment of CORBA_wchar... 2
> checking alignment of CORBA_long_long... 4
> checking alignment of CORBA_unsigned_long_long... 4
> checking alignment of CORBA_struct... 1
> checking alignment of CORBA_pointer... 4
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating orbit-config
> config.status: creating src/Makefile
> config.status: creating src/ORBitutil/Makefile
> config.status: creating src/ORBitutil/orbit-os-config.h
> config.status: creating src/IIOP/Makefile
> config.status: creating src/orb/orbit.h
> config.status: creating src/orb/Makefile
> config.status: creating src/orbit-idl-compiler/Makefile
> config.status: creating src/orbit-idl-compiler/backends/Makefile
> config.status: creating src/orbit-idl-compiler/backends/c/Makefile
> config.status: creating src/services/Makefile
> config.status: creating src/services/name/Makefile
> config.status: creating src/services/event/Makefile
> config.status: creating src/daemons/Makefile
> config.status: creating src/daemons/interface_repository/Makefile
> config.status: creating test/Makefile
> config.status: creating test/idl/Makefile
> config.status: creating test/test-poa/Makefile
> config.status: creating test/everything/Makefile
> config.status: creating ORBit.pc
> config.status: creating ORBit.spec
> config.status: creating config.h
> configure: configuring in libIDL
> configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix... 
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking if C preprocessor likes IDL... yes
> checking if C preprocessor can read from stdin... yes
> checking how to ignore standard include path... 
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for bison... no
> checking for byacc... byacc
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking for glib-config... yes
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >= 1.2.0... yes
> checking for ANSI C header files... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating Makefile.msc
> config.status: creating libIDL-config
> config.status: creating libIDL.m4
> config.status: creating libIDL.spec
> config.status: creating libIDL.pc
> config.status: creating IDL.h.new
> IDL.h is unchanged
> 
> libIDL 0.6.8 configuration complete
> 
>   Flex installed: yes
>   C Preprocessor: "cc -E"
>   Standard input supported.
> 
> configure: configuring in popt
> configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking target system type... i386-portbld-freebsd4.9
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix... 
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking whether cc needs -traditional... no
> checking for cc option to accept ANSI C... none needed
> checking for function prototypes... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... no
> checking whether to build static libraries... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking for alloca.h... no
> checking for libintl.h... yes
> checking for mcheck.h... no
> checking for unistd.h... yes
> checking for /usr/ucblib in LIBS... no
> checking for GNU xgettext... yes
> checking for strerror... yes
> checking for mtrace... no
> checking for setreuid... yes
> checking for ranlib... (cached) ranlib
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for off_t... yes
> checking for size_t... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking whether we are using the GNU C Library 2.1 or newer... no
> checking for argz.h... no
> checking for limits.h... yes
> checking for locale.h... yes
> checking for nl_types.h... yes
> checking for malloc.h... yes
> checking for stddef.h... yes
> checking for stdlib.h... (cached) yes
> checking for string.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... yes
> checking for feof_unlocked... no
> checking for fgets_unlocked... no
> checking for getcwd... yes
> checking for getegid... yes
> checking for geteuid... yes
> checking for getgid... yes
> checking for getuid... yes
> checking for mempcpy... no
> checking for munmap... yes
> checking for putenv... yes
> checking for setenv... yes
> checking for setlocale... yes
> checking for stpcpy... no
> checking for strchr... yes
> checking for strcasecmp... yes
> checking for strdup... yes
> checking for strtoul... yes
> checking for tsearch... yes
> checking for __argz_count... no
> checking for __argz_stringify... no
> checking for __argz_next... no
> checking for iconv... yes
> checking for iconv declaration... 
>          extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
> checking for nl_langinfo and CODESET... yes
> checking for LC_MESSAGES... yes
> checking whether NLS is requested... yes
> checking whether included gettext is requested... no
> checking for libintl.h... (cached) yes
> checking for GNU gettext in libc... no
> checking for GNU gettext in libintl... yes
> checking for dcgettext... yes
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for bison... no
> checking for catalogs to be installed...  da cs el gl ro sk uk wa zh_CN.GB2312
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating intl/Makefile
> config.status: creating po/Makefile.in
> config.status: creating config.h
> ===>  Building for ORBit-0.5.17_1
> gmake  all-recursive
> gmake[1]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> Making all in popt
> gmake[2]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake  all-recursive
> gmake[3]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> Making all in intl
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
> Making all in po
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
> ( if test 'x.' != 'x.'; then \
>     posrcprefix='../'; \
>   else \
>     posrcprefix="../"; \
>   fi; \
>   rm -f POTFILES-t POTFILES \
>     && (sed -e '/^#/d' -e '/^[ 	]*$/d' \
> 	    -e "s at .*@	$posrcprefix& \\\\@" < ./POTFILES.in \
> 	| sed -e '$s/\\$//') > POTFILES-t \
>     && chmod a-w POTFILES-t \
>     && mv POTFILES-t POTFILES )
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> /bin/sh ./libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I. -I.  -I/usr/local/include  -Wall -O -pipe  -c popt.c
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake[3]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake[2]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
> gmake[1]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> *** Error code 2
> 
> Stop in /usr/ports/devel/ORBit.
> 
> ______________________________________________________________________
> _______________________________________________
> freebsd-gnome at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome
> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe at freebsd.org"
-- 
PGP Key : http://www.marcuscom.com/pgp.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20040327/c9b8a274/attachment.bin