gnomesystemmonitor configure failure under gnome 2.6...
Joe Marcus Clarke
marcus at marcuscom.com
Fri Apr 9 19:47:29 GMT 2004
On Fri, 2004-04-09 at 14:17, Jeff Racine wrote:
> Hi.
>
> For some reason, gnomesystemmonitor will not configure nor install via portinstall on my
> system (see below).
>
> Basically it complains that particular files/libs are not up to date and gives version
> numbers for each that fail, however, pkg_version clearly indicates that each of the
> libs deemed out of date are in fact up to date. I did a pkgdb -Fu but to no avail. Any
> suggestions most appreciated. The relevant portion is this (see the log below for version
> numbers to verify that they are in fact correct... that is, libgtop is libgtop2-2.6.0,
> libwnck-2.6.0.1, gtk-2.4.0)
Remove /usr/local/libdata/pkgconfig/libgtop-2.0.pc.
Joe
>
> configure: error: Library requirements (libgnome-2.0 >= 2.0.0 libgnomeui-2.0 >= 2.0.0 gconf-2.0 >= 1.1.5 libgtop-2.0 >= 2.5.2 libwnck-1.0 >= 2.5.0 gtk+-2.0 >= 2.3.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
>
> ===> Script "configure" failed unexpectedly.
>
> Please report the problem to gnome at FreeBSD.org [maintainer] and attach the
>
> "/usr/ports/sysutils/gnomesystemmonitor/work/gnome-system-monitor-2.6.0/config.log"
>
> including the output of the failure of your make command. Also, it might be
>
> a good idea to provide an overview of all packages installed on your system
>
> (e.g. an `ls /var/db/pkg`).
>
>
>
> -- uname
>
> FreeBSD jracine.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT #1: Fri Apr 9 12:34:36 EDT 2004 root at jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON amd64
>
> -- dmesg
>
> ENT #1: Fri Apr 9 12:34:36 EDT 2004
> root at jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff808a4000.
> ACPI APIC Table: <A M I OEMAPIC >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Opteron(tm) Processor 248 (2205.02-MHz K8-class CPU)
> Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8
> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
> real memory = 3623813120 (3455 MB)
> avail memory = 3494785024 (3332 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> ioapic1 <Version 1.1> irqs 24-27 on motherboard
> ioapic2 <Version 1.1> irqs 28-31 on motherboard
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: [GIANT-LOCKED]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
> acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
> acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> ohci0: <OHCI (generic) USB controller> mem 0xfd8fe000-0xfd8fefff irq 19 at device 0.0 on pci2
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 0xfd8ff000-0xfd8fffff irq 19 at device 0.1 on pci2
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfd8f8000-0xfd8fbfff,0xfd8fd800-0xfd8fdfff irq 18 at device 6.0 on pci2
> fwohci0: [GIANT-LOCKED]
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channel is 4.
> fwohci0: EUI64 00:00:00:00:00:01:0e:f8
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:00:00:01:0e:f8
> fwe0: Ethernet address: 02:00:00:01:0e:f8
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> ohci2: <NEC uPD 9210 USB controller> mem 0xfd8f7000-0xfd8f7fff irq 19 at device 7.0 on pci2
> ohci2: [GIANT-LOCKED]
> usb2: OHCI version 1.0
> usb2: <NEC uPD 9210 USB controller> on ohci2
> usb2: USB revision 1.0
> uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 3 ports with 3 removable, self powered
> ohci3: <NEC uPD 9210 USB controller> mem 0xfd8fc000-0xfd8fcfff irq 16 at device 7.1 on pci2
> ohci3: [GIANT-LOCKED]
> usb3: OHCI version 1.0
> usb3: <NEC uPD 9210 USB controller> on ohci3
> usb3: USB revision 1.0
> uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> pci2: <serial bus, USB> at device 7.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf at device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 17 at device 7.5 on pci0
> pcm0: [GIANT-LOCKED]
> pcm0: <Avance Logic ALC655 AC97 Codec>
> pcib3: <ACPI PCI-PCI bridge> at device 10.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfd9fc000-0xfd9fffff irq 19 at device 3.0 on pci3
> skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:d0:68:03:d4:99
> miibus0: <MII bus> on sk0
> e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
> skc0: [GIANT-LOCKED]
> pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
> pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> twe0: <3ware 7000 series Storage Controller. Driver version 1.50.01.000> port 0xbc00-0xbc0f mem 0xfe000000-0xfe7fffff,0xfeaffc00-0xfeaffc0f irq 17 at device 1.0 on pci4
> twe0: [GIANT-LOCKED]
> twe0: 4 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048
> pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0 port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> cpu0 on motherboard
> cpu1 on motherboard
> orm0: <Option ROMs> at iomem 0xcf800-0xd07ff,0xc0000-0xcf7ff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 0.976 msec
> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
> acd0: CDRW <SAMSUNG CDRW/DVD SM-352B> at ata1-master PIO4
> twed0: <Unit 0, TwinStor, Normal> on twe0
> twed0: 70910MB (145224064 sectors)
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/twed0s1a
>
> -- /usr/ports/sysutils/gnomesystemmonitor/work/gnome-system-monitor-2.6.0/config.log"
>
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>
> It was created by configure, which was
> generated by GNU Autoconf 2.59. Invocation command line was
>
> $ ./configure --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include --localstatedir=/usr/X11R6/share/gnome --datadir=/usr/X11R6/share/gnome --with-html-dir=/usr/X11R6/share/doc --disable-gtk-doc --with-gconf-source=xml::/usr/X11R6/etc/gconf/gconf.xml.defaults --prefix=/usr/X11R6 --build=amd64-portbld-freebsd5.2
>
> ## --------- ##
> ## Platform. ##
> ## --------- ##
>
> hostname = jracine.maxwell.syr.edu
> uname -m = amd64
> uname -r = 5.2-CURRENT
> uname -s = FreeBSD
> uname -v = FreeBSD 5.2-CURRENT #1: Fri Apr 9 12:34:36 EDT 2004 root at jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON
>
> /usr/bin/uname -p = amd64
> /bin/uname -X = unknown
>
> /bin/arch = unknown
> /usr/bin/arch -k = unknown
> /usr/convex/getsysinfo = unknown
> hostinfo = unknown
> /bin/machine = unknown
> /usr/bin/oslevel = unknown
> /bin/universe = unknown
>
> PATH: /usr/local/libexec/libtool13
> PATH: /sbin
> PATH: /bin
> PATH: /usr/sbin
> PATH: /usr/bin
> PATH: /usr/games
> PATH: /usr/local/sbin
> PATH: /usr/local/bin
> PATH: /usr/X11R6/bin
> PATH: /root/bin
>
>
> ## ----------- ##
> ## Core tests. ##
> ## ----------- ##
>
> configure:1344: checking for a BSD-compatible install
> configure:1399: result: /usr/bin/install -c -o root -g wheel
> configure:1410: checking whether build environment is sane
> configure:1453: result: yes
> configure:1468: checking whether gmake sets $(MAKE)
> configure:1488: result: yes
> configure:1520: checking for working aclocal-1.4
> configure:1531: result: missing
> configure:1535: checking for working autoconf
> configure:1542: result: found
> configure:1550: checking for working automake-1.4
> configure:1561: result: missing
> configure:1565: checking for working autoheader
> configure:1572: result: found
> configure:1580: checking for working makeinfo
> configure:1587: result: found
> configure:1670: checking for perl
> configure:1688: found /usr/bin/perl
> configure:1700: result: /usr/bin/perl
> configure:1786: checking for gcc
> configure:1812: result: cc
> configure:2056: checking for C compiler version
> configure:2059: cc --version </dev/null >&5
> cc (GCC) 3.3.3 [FreeBSD] 20031106
> Copyright (C) 2003 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> configure:2062: $? = 0
> configure:2064: cc -v </dev/null >&5
> Using built-in specs.
> Configured with: FreeBSD/amd64 system compiler
> Thread model: posix
> gcc version 3.3.3 [FreeBSD] 20031106
> configure:2067: $? = 0
> configure:2069: cc -V </dev/null >&5
> cc: `-V' option must have argument
> configure:2072: $? = 1
> configure:2095: checking for C compiler default output file name
> configure:2098: cc -O -pipe -I/usr/local/include conftest.c -L/usr/local/lib -lutil >&5
> configure:2101: $? = 0
> configure:2147: result: a.out
> configure:2152: checking whether the C compiler works
> configure:2158: ./a.out
> configure:2161: $? = 0
> configure:2178: result: yes
> configure:2185: checking whether we are cross compiling
> configure:2187: result: no
> configure:2190: checking for suffix of executables
> configure:2192: cc -o conftest -O -pipe -I/usr/local/include conftest.c -L/usr/local/lib -lutil >&5
> configure:2195: $? = 0
> configure:2220: result:
> configure:2226: checking for suffix of object files
> configure:2247: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2250: $? = 0
> configure:2272: result: o
> configure:2276: checking whether we are using the GNU C compiler
> configure:2300: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2306: $? = 0
> configure:2310: test -z
> || test ! -s conftest.err
> configure:2313: $? = 0
> configure:2316: test -s conftest.o
> configure:2319: $? = 0
> configure:2332: result: yes
> configure:2338: checking whether cc accepts -g
> configure:2359: cc -c -g -I/usr/local/include conftest.c >&5
> configure:2365: $? = 0
> configure:2369: test -z
> || test ! -s conftest.err
> configure:2372: $? = 0
> configure:2375: test -s conftest.o
> configure:2378: $? = 0
> configure:2389: result: yes
> configure:2406: checking for cc option to accept ANSI C
> configure:2476: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2482: $? = 0
> configure:2486: test -z
> || test ! -s conftest.err
> configure:2489: $? = 0
> configure:2492: test -s conftest.o
> configure:2495: $? = 0
> configure:2513: result: none needed
> configure:2531: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> conftest.c:2: error: syntax error before "me"
> configure:2537: $? = 1
> configure: failed program was:
> | #ifndef __cplusplus
> | choke me
> | #endif
> configure:2672: checking for strerror in -lcposix
> configure:2702: cc -o conftest -O -pipe -I/usr/local/include conftest.c -lcposix -L/usr/local/lib -lutil >&5
> /usr/bin/ld: cannot find -lcposix
> configure:2708: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
> |
> | #define PACKAGE_NAME ""
> | #define PACKAGE_TARNAME ""
> | #define PACKAGE_VERSION ""
> | #define PACKAGE_STRING ""
> | #define PACKAGE_BUGREPORT ""
> | #define PACKAGE "gnome-system-monitor"
> | #define VERSION "2.6.0"
> | /* end confdefs.h. */
> |
> | /* Override any gcc2 internal prototype to avoid an error. */
> | #ifdef __cplusplus
> | extern "C"
> | #endif
> | /* We use char because int might match the return type of a gcc2
> | builtin and then its argument prototype would still apply. */
> | char strerror ();
> | int
> | main ()
> | {
> | strerror ();
> | ;
> | return 0;
> | }
> configure:2734: result: no
> configure:2788: checking for gcc
> configure:2814: result: cc
> configure:3058: checking for C compiler version
> configure:3061: cc --version </dev/null >&5
> cc (GCC) 3.3.3 [FreeBSD] 20031106
> Copyright (C) 2003 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> configure:3064: $? = 0
> configure:3066: cc -v </dev/null >&5
> Using built-in specs.
> Configured with: FreeBSD/amd64 system compiler
> Thread model: posix
> gcc version 3.3.3 [FreeBSD] 20031106
> configure:3069: $? = 0
> configure:3071: cc -V </dev/null >&5
> cc: `-V' option must have argument
> configure:3074: $? = 1
> configure:3077: checking whether we are using the GNU C compiler
> configure:3133: result: yes
> configure:3139: checking whether cc accepts -g
> configure:3190: result: yes
> configure:3207: checking for cc option to accept ANSI C
> configure:3314: result: none needed
> configure:3332: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> conftest.c:2: error: syntax error before "me"
> configure:3338: $? = 1
> configure: failed program was:
> | #ifndef __cplusplus
> | choke me
> | #endif
> configure:3474: checking for cc option to accept ANSI C
> configure:3536: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:3542: $? = 0
> configure:3546: test -z
> || test ! -s conftest.err
> configure:3549: $? = 0
> configure:3552: test -s conftest.o
> configure:3555: $? = 0
> configure:3570: result: none needed
> configure:3586: checking how to run the C preprocessor
> configure:3621: cc -E -I/usr/local/include conftest.c
> configure:3627: $? = 0
> configure:3659: cc -E -I/usr/local/include conftest.c
> conftest.c:11:28: ac_nonexistent.h: No such file or directory
> configure:3665: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
> |
> | #define PACKAGE_NAME ""
> | #define PACKAGE_TARNAME ""
> | #define PACKAGE_VERSION ""
> | #define PACKAGE_STRING ""
> | #define PACKAGE_BUGREPORT ""
> | #define PACKAGE "gnome-system-monitor"
> | #define VERSION "2.6.0"
> | /* end confdefs.h. */
> | #include <ac_nonexistent.h>
> configure:3704: result: cc -E
> configure:3728: cc -E -I/usr/local/include conftest.c
> configure:3734: $? = 0
> configure:3766: cc -E -I/usr/local/include conftest.c
> conftest.c:11:28: ac_nonexistent.h: No such file or directory
> configure:3772: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
> |
> | #define PACKAGE_NAME ""
> | #define PACKAGE_TARNAME ""
> | #define PACKAGE_VERSION ""
> | #define PACKAGE_STRING ""
> | #define PACKAGE_BUGREPORT ""
> | #define PACKAGE "gnome-system-monitor"
> | #define VERSION "2.6.0"
> | /* end confdefs.h. */
> | #include <ac_nonexistent.h>
> configure:3816: checking for egrep
> configure:3826: result: grep -E
> configure:3831: checking for ANSI C header files
> configure:3856: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:3862: $? = 0
> configure:3866: test -z
> || test ! -s conftest.err
> configure:3869: $? = 0
> configure:3872: test -s conftest.o
> configure:3875: $? = 0
> configure:3964: cc -o conftest -O -pipe -I/usr/local/include conftest.c -L/usr/local/lib -lutil >&5
> configure:3967: $? = 0
> configure:3969: ./conftest
> configure:3972: $? = 0
> configure:3987: result: yes
> configure:4105: checking what warning flags to pass to the C compiler
> configure:4107: result: -Wall -Wmissing-prototypes
> configure:4118: checking what language compliance flags to pass to the C compiler
> configure:4133: result:
> configure:4153: checking for pkg-config
> configure:4171: found /usr/local/bin/pkg-config
> configure:4184: result: /usr/local/bin/pkg-config
> configure:4201: checking for libgnome-2.0 >= 2.0.0 libgnomeui-2.0 >= 2.0.0 gconf-2.0 >= 1.1.5 libgtop-2.0 >= 2.5.2 libwnck-1.0 >= 2.5.0 gtk+-2.0 >= 2.3.0
> configure:4240: error: Library requirements (libgnome-2.0 >= 2.0.0 libgnomeui-2.0 >= 2.0.0 gconf-2.0 >= 1.1.5 libgtop-2.0 >= 2.5.2 libwnck-1.0 >= 2.5.0 gtk+-2.0 >= 2.3.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
>
> ## ---------------- ##
> ## Cache variables. ##
> ## ---------------- ##
>
> ac_cv_lib_cposix_strerror=no
> ac_cv_prog_cc_g=yes
> ac_cv_path_INTLTOOL_PERL=/usr/bin/perl
> ac_cv_env_LDFLAGS_set=
> ac_cv_path_PKG_CONFIG=/usr/local/bin/pkg-config
> ac_cv_c_compiler_gnu=yes
> ac_cv_exeext=
> ac_cv_env_CFLAGS_set=set
> ac_cv_prog_make_gmake_set=yes
> lt_cv_sys_max_cmd_len=65536
> ac_cv_env_CPP_value=
> ac_cv_env_CPPFLAGS_set=set
> ac_cv_env_host_alias_set=
> ac_cv_env_build_alias_set=set
> ac_cv_env_LDFLAGS_value=
> ac_cv_env_target_alias_set=
> ac_cv_prog_cc_stdc=
> ac_cv_env_CFLAGS_value='-O -pipe '
> ac_cv_env_CC_set=set
> ac_cv_header_stdc=yes
> ac_cv_prog_egrep='grep -E'
> ac_cv_env_CPPFLAGS_value=-I/usr/local/include
> ac_cv_env_host_alias_value=
> am_cv_prog_cc_stdc=
> ac_cv_prog_CPP='cc -E'
> ac_cv_env_build_alias_value=amd64-portbld-freebsd5.2
> ac_cv_prog_ac_ct_CC=cc
> ac_cv_env_target_alias_value=
> ac_cv_env_CC_value=cc
> ac_cv_env_CPP_set=
> ac_cv_objext=o
>
> ## ----------------- ##
> ## Output variables. ##
> ## ----------------- ##
>
> ACLOCAL='/usr/ports/sysutils/gnomesystemmonitor/work/gnome-system-monitor-2.6.0/missing aclocal-1.4'
> AUTOCONF='autoconf'
> AUTOHEADER='autoheader'
> AUTOMAKE='/usr/ports/sysutils/gnomesystemmonitor/work/gnome-system-monitor-2.6.0/missing automake-1.4'
> CATALOGS=''
> CATOBJEXT=''
> CC='cc'
> CFLAGS='-O -pipe '
> CPP='cc -E'
> CPPFLAGS='-I/usr/local/include'
> DATADIRNAME=''
> DEFS=''
> ECHO_C=''
> ECHO_N='-n'
> ECHO_T=''
> EGREP='grep -E'
> EXEEXT=''
> GCONF_SCHEMAS_INSTALL_FALSE=''
> GCONF_SCHEMAS_INSTALL_TRUE=''
> GCONF_SCHEMA_CONFIG_SOURCE=''
> GCONF_SCHEMA_FILE_DIR=''
> GETTEXT_PACKAGE=''
> GMOFILES=''
> GMSGFMT=''
> INSTALL_DATA='install -o root -g wheel -m 444'
> INSTALL_PROGRAM='install -s -o root -g wheel -m 555'
> INSTALL_SCRIPT='install -o root -g wheel -m 555'
> INSTOBJEXT=''
> INTLLIBS=''
> INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract'
> INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -m -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -k -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_MERGE='$(top_builddir)/intltool-merge'
> INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -o -p'
> INTLTOOL_PERL='/usr/bin/perl'
> INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -s -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -o -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_UPDATE='$(top_builddir)/intltool-update'
> INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
> INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
> LDFLAGS=''
> LIBOBJS=''
> LIBS='-L/usr/local/lib -lutil'
> LTLIBOBJS=''
> MAKEINFO='makeinfo'
> MKINSTALLDIRS=''
> MSGFMT=''
> OBJEXT='o'
> PACKAGE='gnome-system-monitor'
> PACKAGE_BUGREPORT=''
> PACKAGE_NAME=''
> PACKAGE_STRING=''
> PACKAGE_TARNAME=''
> PACKAGE_VERSION=''
> PATH_SEPARATOR=':'
> PKG_CONFIG='/usr/local/bin/pkg-config'
> POFILES=''
> POSUB=''
> PO_IN_DATADIR_FALSE=''
> PO_IN_DATADIR_TRUE=''
> PROCMAN_CFLAGS=''
> PROCMAN_LIBS=''
> SET_MAKE=''
> SHELL='/bin/sh'
> USE_NLS=''
> VERSION='2.6.0'
> WARN_CFLAGS='-Wall -Wmissing-prototypes '
> XGETTEXT=''
> ac_ct_CC='cc'
> bindir='${exec_prefix}/bin'
> build_alias='amd64-portbld-freebsd5.2'
> datadir='/usr/X11R6/share/gnome'
> exec_prefix='NONE'
> host_alias=''
> includedir='${prefix}/include'
> infodir='${prefix}/info'
> libdir='${exec_prefix}/lib'
> libexecdir='${exec_prefix}/libexec'
> localstatedir='/usr/X11R6/share/gnome'
> mandir='${prefix}/man'
> oldincludedir='/usr/include'
> prefix='/usr/X11R6'
> program_transform_name='s,x,x,'
> sbindir='${exec_prefix}/sbin'
> sharedstatedir='${prefix}/com'
> sysconfdir='${prefix}/etc'
> target_alias=''
>
> ## ----------- ##
> ## confdefs.h. ##
> ## ----------- ##
>
> #define PACKAGE "gnome-system-monitor"
> #define PACKAGE_BUGREPORT ""
> #define PACKAGE_NAME ""
> #define PACKAGE_STRING ""
> #define PACKAGE_TARNAME ""
> #define PACKAGE_VERSION ""
> #define STDC_HEADERS 1
> #define VERSION "2.6.0"
>
> configure: exit 1
>
>
> -- make log & pkg_version
>
> ---> Installing 'gnomesystemmonitor-2.6.0' from a port (sysutils/gnomesystemmonitor)
>
> ---> Building '/usr/ports/sysutils/gnomesystemmonitor'
>
> ===> Cleaning for atk-1.6.0
>
> ===> Cleaning for unzip-5.50_2
>
> ===> Cleaning for esound-0.2.34
>
> ===> Cleaning for libaudiofile-0.2.6
>
> ===> Cleaning for libiconv-1.9.1_3
>
> ===> Cleaning for ORBit2-2.10.0
>
> ===> Cleaning for autoconf-2.53_1
>
> ===> Cleaning for automake-1.5,1
>
> ===> Cleaning for bison-1.75_2
>
> ===> Cleaning for fam-2.6.9_4
>
> ===> Cleaning for gconf2-2.6.0
>
> ===> Cleaning for gettext-0.13.1_1
>
> ===> Cleaning for glib-2.4.0
>
> ===> Cleaning for gmake-3.80_2
>
> ===> Cleaning for gnomevfs2-2.6.0_1
>
> ===> Cleaning for imake-4.3.0_2
>
> ===> Cleaning for libIDL-0.8.3_2
>
> ===> Cleaning for libbonobo-2.6.0
>
> ===> Cleaning for libglade2-2.3.6
>
> ===> Cleaning for libgtop2-2.6.0
>
> ===> Cleaning for libtool-1.3.5_2
>
> ===> Cleaning for m4-1.4_1
>
> ===> Cleaning for p5-gettext-1.01_4
>
> ===> Cleaning for pkgconfig-0.15.0_1
>
> ===> Cleaning for popt-1.6.4_2
>
> ===> Cleaning for jpeg-6b_2
>
> ===> Cleaning for libart_lgpl2-2.3.16
>
> ===> Cleaning for libgnomecanvas-2.6.0
>
> ===> Cleaning for png-1.2.5_3
>
> ===> Cleaning for tiff-3.6.1_1
>
> ===> Cleaning for perl-5.8.2_5
>
> ===> Cleaning for python-2.3.3_4
>
> ===> Cleaning for gnome-icon-theme-1.2.0
>
> ===> Cleaning for gnomehier-1.0_17
>
> ===> Cleaning for gnomemimedata-2.4.1_2
>
> ===> Cleaning for help2man-1.33.1
>
> ===> Cleaning for hicolor-icon-theme-0.4
>
> ===> Cleaning for shared-mime-info-0.14_1
>
> ===> Cleaning for linc-1.0.3_2
>
> ===> Cleaning for freetype2-2.1.7_2
>
> ===> Cleaning for gnomekeyring-0.2.0
>
> ===> Cleaning for docbook-sk-4.1.2_3
>
> ===> Cleaning for docbook-xml-4.2_1
>
> ===> Cleaning for docbook-xsl-1.65.1
>
> ===> Cleaning for expat-1.95.7
>
> ===> Cleaning for intltool-0.30_1
>
> ===> Cleaning for libxml2-2.6.8
>
> ===> Cleaning for libxslt-1.1.5
>
> ===> Cleaning for p5-XML-Parser-2.34_1
>
> ===> Cleaning for scrollkeeper-0.3.14_1,1
>
> ===> Cleaning for sdocbook-xml-4.1.2.5_2
>
> ===> Cleaning for xmlcatmgr-2.0.b1
>
> ===> Cleaning for XFree86-fontEncodings-4.3.0
>
> ===> Cleaning for XFree86-fontScalable-4.3.0
>
> ===> Cleaning for fontconfig-2.2.2,1
>
> ===> Cleaning for libXft-2.1.6
>
> ===> Cleaning for gtk-2.4.0
>
> ===> Cleaning for libbonoboui-2.6.0
>
> ===> Cleaning for libgnomeui-2.6.0_1
>
> ===> Cleaning for libwnck-2.6.0.1
>
> ===> Cleaning for pango-1.4.0
>
> ===> Cleaning for XFree86-clients-4.3.0_7
>
> ===> Cleaning for XFree86-libraries-4.3.0_6
>
> ===> Cleaning for libgnome-2.6.0
>
> ===> Cleaning for startup-notification-0.6
>
> ===> Cleaning for gnomesystemmonitor-2.6.0
>
> ===> Vulnerability check disabled
>
> ===> Extracting for gnomesystemmonitor-2.6.0
>
> >> Checksum OK for gnome2/gnome-system-monitor-2.6.0.tar.bz2.
>
> ===> Patching for gnomesystemmonitor-2.6.0
>
> ===> Applying FreeBSD patches for gnomesystemmonitor-2.6.0
>
> ===> gnomesystemmonitor-2.6.0 depends on executable: gmake - found
>
> ===> gnomesystemmonitor-2.6.0 depends on file: /usr/local/libexec/libtool13/libtool - found
>
> ===> gnomesystemmonitor-2.6.0 depends on file: /usr/X11R6/libdata/pkgconfig/gnome-mime-data-2.0.pc - found
>
> ===> gnomesystemmonitor-2.6.0 depends on executable: pkg-config - found
>
> ===> gnomesystemmonitor-2.6.0 depends on file: /usr/local/bin/intltool-extract - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: gtop-2.0.2 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: X11.6 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: esd.2 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: glib-2.0.400 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: atk-1.0.600 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: pango-1.0.399 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: gtk-x11-2.0.400 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: linc.1 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: IDL-2.0 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: ORBit-2.0 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: glade-2.0.0 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: xml2.5 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: xslt.2 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: bonobo-2.0 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: gconf-2.5 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: gnomevfs-2.600 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: gnomecanvas-2.600 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: art_lgpl_2.5 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: gnome-2.600 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: bonoboui-2.0 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: gnomeui-2.600 - found
>
> ===> gnomesystemmonitor-2.6.0 depends on shared library: wnck-1.13 - found
>
> ===> Configuring for gnomesystemmonitor-2.6.0
>
> checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
>
> checking whether build environment is sane... yes
>
> checking whether gmake sets $(MAKE)... yes
>
> checking for working aclocal-1.4... missing
>
> checking for working autoconf... found
>
> checking for working automake-1.4... missing
>
> checking for working autoheader... found
>
> checking for working makeinfo... found
>
> checking for perl... /usr/bin/perl
>
> checking for gcc... cc
>
> checking for C compiler default output file name... a.out
>
> checking whether the C compiler works... yes
>
> checking whether we are cross compiling... no
>
> checking for suffix of executables...
>
> checking for suffix of object files... o
>
> checking whether we are using the GNU C compiler... yes
>
> checking whether cc accepts -g... yes
>
> checking for cc option to accept ANSI C... none needed
>
> checking for strerror in -lcposix... no
>
> checking for gcc... (cached) cc
>
> checking whether we are using the GNU C compiler... (cached) yes
>
> checking whether cc accepts -g... (cached) yes
>
> checking for cc option to accept ANSI C... (cached) none needed
>
> checking for cc option to accept ANSI C... none needed
>
> checking how to run the C preprocessor... cc -E
>
> checking for egrep... grep -E
>
> checking for ANSI C header files... yes
>
> checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes
>
> checking what language compliance flags to pass to the C compiler...
>
> checking for pkg-config... /usr/local/bin/pkg-config
>
> checking for libgnome-2.0 >= 2.0.0 libgnomeui-2.0 >= 2.0.0 gconf-2.0 >= 1.1.5 libgtop-2.0 >= 2.5.2 libwnck-1.0 >= 2.5.0 gtk+-2.0 >= 2.3.0... Requested 'libgtop-2.0 >= 2.5.2' but version of libgtop is 2.0.7
>
>
>
> configure: error: Library requirements (libgnome-2.0 >= 2.0.0 libgnomeui-2.0 >= 2.0.0 gconf-2.0 >= 1.1.5 libgtop-2.0 >= 2.5.2 libwnck-1.0 >= 2.5.0 gtk+-2.0 >= 2.3.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
>
> ===> Script "configure" failed unexpectedly.
>
> Please report the problem to gnome at FreeBSD.org [maintainer] and attach the
>
> "/usr/ports/sysutils/gnomesystemmonitor/work/gnome-system-monitor-2.6.0/config.log"
>
> including the output of the failure of your make command. Also, it might be
>
> a good idea to provide an overview of all packages installed on your system
>
> (e.g. an `ls /var/db/pkg`).
>
> *** Error code 1
>
>
>
> Stop in /usr/ports/sysutils/gnomesystemmonitor.
>
> ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portinstall46293.0 make
>
> ** Fix the problem and try again.
>
> ** Listing the failed packages (*:skipped / !:failed)
>
> ! sysutils/gnomesystemmonitor (configure error)
>
> ---> Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed
>
> jracine# pkg_version -v
>
>
> Hermes-1.3.3_1 = up-to-date with port
>
> ORBit-0.5.17_2 = up-to-date with port
>
> ORBit2-2.10.0 = up-to-date with port
>
> R-letter-1.8.1 = up-to-date with port
>
> XFree86-Server-4.3.0_14 = up-to-date with port
>
> XFree86-clients-4.3.0_7 = up-to-date with port
>
> XFree86-documents-4.3.0 = up-to-date with port
>
> XFree86-font100dpi-4.3.0 = up-to-date with port
>
> XFree86-font75dpi-4.3.0 = up-to-date with port
>
> XFree86-fontDefaultBitmaps-4.3.0 = up-to-date with port
>
> XFree86-fontEncodings-4.3.0 = up-to-date with port
>
> XFree86-fontScalable-4.3.0 = up-to-date with port
>
> XFree86-libraries-4.3.0_6 = up-to-date with port
>
> XFree86-manuals-4.3.0 = up-to-date with port
>
> Xaw3d-1.5 = up-to-date with port
>
> aspell-0.50.5_1 = up-to-date with port
>
> at-spi-1.4.0 = up-to-date with port
>
> atk-1.6.0 = up-to-date with port
>
> autoconf-2.13.000227_5 = up-to-date with port
>
> autoconf-2.53_1 = up-to-date with port
>
> automake-1.5,1 = up-to-date with port
>
> bash-2.05b.007 = up-to-date with port
>
> bison-1.75_2 = up-to-date with port
>
> bitstream-vera-1.10 = up-to-date with port
>
> bonobo-1.0.22_1 = up-to-date with port
>
> bugbuddy2-2.6.0 = up-to-date with port
>
> cdrtools-2.0.3_1 = up-to-date with port
>
> cvsup-without-gui-16.1h = up-to-date with port
>
> dasher-3.2.8 = up-to-date with port
>
> dia-gnome-0.92.2_3,1 = up-to-date with port
>
> docbook-sk-4.1.2_3 = up-to-date with port
>
> docbook-xml-4.2_1 = up-to-date with port
>
> docbook-xsl-1.65.1 = up-to-date with port
>
> eel2-2.6.0 = up-to-date with port
>
> emacs-21.3_2 = up-to-date with port
>
> eog2-2.6.0 = up-to-date with port
>
> epiphany-1.2.2 = up-to-date with port
>
> esound-0.2.34 = up-to-date with port
>
> evolution-1.4.6_1 = up-to-date with port
>
> expat-1.95.7 = up-to-date with port
>
> fam-2.6.9_4 = up-to-date with port
>
> fileroller-2.6.0,1 = up-to-date with port
>
> fontconfig-2.2.2,1 = up-to-date with port
>
> freetype2-2.1.7_2 = up-to-date with port
>
> gail-1.6.1 = up-to-date with port
>
> gal-0.24_1 = up-to-date with port
>
> gal2-1.99.11_1 = up-to-date with port
>
> galeon2-1.3.14a_1 = up-to-date with port
>
> gcalctool-4.3.51_1 = up-to-date with port
>
> gconf-1.0.9_7 = up-to-date with port
>
> gconf-editor-2.4.0,1 < needs updating (port has 2.6.0,1)
>
> gconf2-2.6.0 = up-to-date with port
>
> gdbm-1.8.3_1 = up-to-date with port
>
> gdk-pixbuf-0.22.0_1 = up-to-date with port
>
> gdm2-2.6.0.0_1 = up-to-date with port
>
> gedit2-2.6.0 = up-to-date with port
>
> gettext-0.13.1_1 = up-to-date with port
>
> ggv2-2.6.0.1 = up-to-date with port
>
> ghostscript-gnu-7.07_6 = up-to-date with port
>
> glabels-1.93.3_1 = up-to-date with port
>
> gle-3.0.3 = up-to-date with port
>
> glib-1.2.10_10 = up-to-date with port
>
> glib-2.4.0 = up-to-date with port
>
> gmake-3.80_2 = up-to-date with port
>
> gnome-icon-theme-1.2.0 = up-to-date with port
>
> gnome-themes-2.6.0 = up-to-date with port
>
> gnome2-2.6.0 = up-to-date with port
>
> gnomeapplets2-2.6.0 = up-to-date with port
>
> gnomeaudio2-2.0.0 = up-to-date with port
>
> gnomebasic-0.0.20_1 = up-to-date with port
>
> gnomecanvas-0.22.0_1 = up-to-date with port
>
> gnomecontrolcenter2-2.6.0.3 = up-to-date with port
>
> gnomedb-0.2.96_2 = up-to-date with port
>
> gnomedesktop-2.6.0.1 = up-to-date with port
>
> gnomegames2-2.6.0.1_1 = up-to-date with port
>
> gnomehier-1.0_17 = up-to-date with port
>
> gnomekeyring-0.2.0 = up-to-date with port
>
> gnomelibs-1.4.2_2 = up-to-date with port
>
> gnomemag-0.10.10 = up-to-date with port
>
> gnomemedia2-2.6.0_1 = up-to-date with port
>
> gnomemimedata-2.4.1_2 = up-to-date with port
>
> gnomenetstatus-2.6.0.1 = up-to-date with port
>
> gnomepanel-2.6.0 = up-to-date with port
>
> gnomeprint-0.37_1 = up-to-date with port
>
> gnomesession-2.6.0 = up-to-date with port
>
> gnomespeech-0.3.2 = up-to-date with port
>
> gnomespell-1.0.5_2 = up-to-date with port
>
> gnometerminal-2.6.0 = up-to-date with port
>
> gnomeuserdocs2-2.6.0.1 = up-to-date with port
>
> gnomeutils2-2.6.0,1 = up-to-date with port
>
> gnomevfs-1.0.5_5 = up-to-date with port
>
> gnomevfs2-2.6.0_1 = up-to-date with port
>
> gnopernicus-0.8.2 = up-to-date with port
>
> gnumeric-1.0.13_1 = up-to-date with port
>
> gnumeric2-1.2.9 = up-to-date with port
>
> gnuplot-3.7.3_2 = up-to-date with port
>
> gok-0.10.0 = up-to-date with port
>
> gpdf-0.131 = up-to-date with port
>
> gstreamer-0.8.0_1 = up-to-date with port
>
> gstreamer-plugins-0.8.0_1 = up-to-date with port
>
> gtk-1.2.10_11 = up-to-date with port
>
> gtk-2.4.0 = up-to-date with port
>
> gtk-engines2-2.2.0_3 = up-to-date with port
>
> gtkhtml3-3.0.10_1 = up-to-date with port
>
> gtksourceview-1.0.0 = up-to-date with port
>
> gucharmap-gnome-1.4.1 = up-to-date with port
>
> guile-1.6.4_4 = up-to-date with port
>
> guppi-0.40.3_4 = up-to-date with port
>
> help2man-1.33.1 = up-to-date with port
>
> hicolor-icon-theme-0.4 = up-to-date with port
>
> imake-4.3.0_2 = up-to-date with port
>
> imlib-1.9.14_2 = up-to-date with port
>
> intltool-0.30_1 = up-to-date with port
>
> jbigkit-1.5 = up-to-date with port
>
> jpeg-6b_2 = up-to-date with port
>
> lame-3.95.1_2 = up-to-date with port
>
> lapack-3.0 = up-to-date with port
>
> latex-beamer-2.10 = up-to-date with port
>
> latex-pgf-0.60 = up-to-date with port
>
> latex-xcolor-1.09 = up-to-date with port
>
> lcms-1.09_1,1 = up-to-date with port
>
> libIDL-0.8.3_2 = up-to-date with port
>
> libXft-2.1.6 = up-to-date with port
>
> libart_lgpl2-2.3.16 = up-to-date with port
>
> libaudiofile-0.2.6 = up-to-date with port
>
> libbonobo-2.6.0 = up-to-date with port
>
> libbonoboui-2.6.0 = up-to-date with port
>
> libcroco-0.5.0_1 = up-to-date with port
>
> libgail-gnome-1.0.3_2 = up-to-date with port
>
> libgda-0.2.96_2 = up-to-date with port
>
> libgda2-1.0.3_2 = up-to-date with port
>
> libglade-0.17_3 = up-to-date with port
>
> libglade2-2.3.6 = up-to-date with port
>
> libglut-5.0.2 = up-to-date with port
>
> libgnome-2.6.0 = up-to-date with port
>
> libgnomecanvas-2.6.0 = up-to-date with port
>
> libgnomedb-1.0.3_2 = up-to-date with port
>
> libgnomeprint-2.6.0 = up-to-date with port
>
> libgnomeprintui-2.6.0_1 = up-to-date with port
>
> libgnomeui-2.6.0_1 = up-to-date with port
>
> libgsf-1.8.2_2 = up-to-date with port
>
> libgtkhtml-2.6.0 = up-to-date with port
>
> libgtop2-2.6.0 = up-to-date with port
>
> libiconv-1.9.1_3 = up-to-date with port
>
> libid3tag-0.15.0b_1 = up-to-date with port
>
> libltdl-1.5.2 = up-to-date with port
>
> libmad-0.15.0b = up-to-date with port
>
> libmng-1.0.7 = up-to-date with port
>
> libole2-0.2.4_1 = up-to-date with port
>
> librsvg2-2.6.4 = up-to-date with port
>
> libsoup-1.99.28_1 = up-to-date with port
>
> libtool-1.3.5_2 = up-to-date with port
>
> libtool-1.4.3_3 = up-to-date with port
>
> libtool-1.5.2_1 = up-to-date with port
>
> libungif-4.1.2 = up-to-date with port
>
> libunicode-0.4_4 = up-to-date with port
>
> libwnck-2.6.0.1 = up-to-date with port
>
> libwww-5.4.0_1 = up-to-date with port
>
> libxklavier-1.00,1 = up-to-date with port
>
> libxml-1.8.17_2 = up-to-date with port
>
> libxml2-2.6.8 = up-to-date with port
>
> libxslt-1.1.5 = up-to-date with port
>
> linc-1.0.3_2 = up-to-date with port
>
> m4-1.4_1 = up-to-date with port
>
> mergeant-0.12.1_2 = up-to-date with port
>
> metacity-2.8.0 = up-to-date with port
>
> mkisofs-2.0.3_1 = up-to-date with port
>
> mozilla-1.6_4,2 = up-to-date with port
>
> nautilus-cd-burner-2.6.0 = up-to-date with port
>
> nautilus-media-0.8.0_1 = up-to-date with port
>
> nautilus2-2.6.0_1 = up-to-date with port
>
> netpbm-10.21_1 = up-to-date with port
>
> nspr-4.4.1_1 = up-to-date with port
>
> oaf-0.6.10_2 = up-to-date with port
>
> open-motif-2.2.2_2 = up-to-date with port
>
> openldap-client-2.1.29 = up-to-date with port
>
> openssh-3.6.1_5 = up-to-date with port
>
> openssl-0.9.7d = up-to-date with port
>
> p5-XML-Parser-2.34_1 = up-to-date with port
>
> p5-gettext-1.01_4 = up-to-date with port
>
> pango-1.4.0 = up-to-date with port
>
> pcre-4.5 = up-to-date with port
>
> pdflib-5.0.3_1 = up-to-date with port
>
> perl-5.6.1_15 = up-to-date with port
>
> perl-5.8.2_5 = up-to-date with port
>
> pkgconfig-0.15.0_1 = up-to-date with port
>
> planner-0.11_3 = up-to-date with port
>
> png-1.2.5_3 = up-to-date with port
>
> popt-1.6.4_2 = up-to-date with port
>
> portupgrade-20040325_1 = up-to-date with port
>
> psiconv-0.8.3_1 = up-to-date with port
>
> py23-gtk-2.2.0_2 = up-to-date with port
>
> py23-numeric-23.1 = up-to-date with port
>
> python-2.3.3_4 = up-to-date with port
>
> rsync-2.6.0 = up-to-date with port
>
> ruby-1.8.1_2 = up-to-date with port
>
> ruby18-bdb1-0.2.2 = up-to-date with port
>
> scrollkeeper-0.3.14_1,1 = up-to-date with port
>
> sdocbook-xml-4.1.2.5_2 = up-to-date with port
>
> shared-mime-info-0.14_1 = up-to-date with port
>
> sox-12.17.4_1 = up-to-date with port
>
> startup-notification-0.6 = up-to-date with port
>
> t1lib-5.0.1 = up-to-date with port
>
> tcl-8.4.6,1 = up-to-date with port
>
> teTeX-2.0.2_3 = up-to-date with port
>
> tex-texmflocal-1.3 = up-to-date with port
>
> tiff-3.6.1_1 = up-to-date with port
>
> tk-8.4.6,1 = up-to-date with port
>
> tth-3.59 = up-to-date with port
>
> unzip-5.50_2 = up-to-date with port
>
> vte-0.11.10_5 = up-to-date with port
>
> wrapper-1.0_3 = up-to-date with port
>
> xmlcatmgr-2.0.b1 = up-to-date with port
>
> xpdf-3.00 = up-to-date with port
>
> xscreensaver-gnome-4.15_2 = up-to-date with port
>
> yelp-2.6.0 = up-to-date with port
>
> zenity-2.6.0 = up-to-date with port
>
> zip-2.3_1 = up-to-date with port
>
>
>
>
>
>
> _______________________________________________
> freebsd-gnome at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome
> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe at freebsd.org"
--
PGP Key : http://www.marcuscom.com/pgp.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20040409/9d0efa2a/attachment.bin
More information about the freebsd-gnome
mailing list