Nautilus CD-Burner setup (was Re: portupgrade -rf -m BATCH=yes atk repeatably fails)

[Joe Marcus Clarke]

On Mon, 2003-09-22 at 15:40, Simon Barner wrote:
> Joe Marcus Clarke:
> > On Sun, 2003-09-21 at 20:47, Justin Hawkins wrote:
> > > On Sun, Sep 21, 2003 at 11:07:35AM +0100, Stacey Roberts wrote:
> > > > ======================================================================
> > > > In order to use nautilus-cd-burner, you must make sure your CD devices
> > > > have the correct permissions.  You must also make sure you have:
> > > >  
> > > > device          atapicam
> 
> You will also need 
> 
> device scbus
> device pass
> device cd
> 
> in order to get the cd burner up and running. (device cd is needed since
> the cd burner scans /dev/cd?c for CD-R/W devices, unlike for example
> cdrecord which uses that LUN numbering. I have some experience with that
> since I spent quite a lot of time debugging the nautilus cd burner,
> which did not work although xcdroast and cdrecord worked liked a charm
> ... ).

n-c-b uses those devices to locate CD drives.  I just assumed that
everyone that used atapicam also had the SCSI subplayer (I actually
thought it was required).

Joe

> 
> Regards,
>  Simon
-- 
PGP Key : http://www.marcuscom.com/pgp.asc


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20030922/ae372953/attachment.bin