gnome 2 meta build failure
J. W. Ballantine
jwb at homer.att.com
Tue Apr 8 11:37:11 PDT 2003
Trying to build gnome2 on a clean 4.X-stable system using a ports
cvs of monday late morning (EST).
While first trying to build gnome2 ports, I originally got error messages
that pkg-config was out of date and needed to be be updated. After
doing that I started make install again, and it ran through
several ports then failed. When I tried make install again the following
output was generated (as suggested I've also included the config log
and pkg db output).
When I try to deinstall, I get the message that nothing was installed.
Any thoughts as to what is going on here.
Thanks
Jim Ballantine
When I attempt to install the gnome2/sawfish desktop via sysinstall
from 4.8 RELEASE install disk that also fails during the e-something
package.
Verbose output follows:
>> Script started on Mon Apr 7 13:37:03 2003
>> # make reinstall
>> ===> Installing for gnome2-2.2.1
>> ===> gnome2-2.2.1 depends on file: /usr/X11R6/libexec/cdplayer_applet2 - not
>> found
>> ===> Verifying reinstall for /usr/X11R6/libexec/cdplayer_applet2 in
>> /usr/ports/x11/gnomeapplets2
>> ===> gnomeapplets2-2.2.1 depends on executable: gmake - found
>> ===> gnomeapplets2-2.2.1 depends on executable: libtool - found
>> ===> gnomeapplets2-2.2.1 depends on file: /usr/X11R6/libdata/pkgconfig/gnome-
>> mime-data-2.0.pc - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: gtop-2.0 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: X11.6 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: esd.2 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: glib-2.0.200 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: atk-1.0.200 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: pango-1.0.200 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: gtk-x11-2.0.200 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: linc.1 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: IDL-2.0 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: ORBit-2.0 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: glade-2.0.0 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: xml2.5 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: xslt.1 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: bonobo-activation.4 -
>> found
>> ===> gnomeapplets2-2.2.1 depends on shared library: bonobo-2.0 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: gconf-2.5 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: gnomevfs-2.0 - found
>> ===> gnomeapplets2-2.2.1 depends on shared library: gailutil.17 - not found
>> ===> Verifying reinstall for gailutil.17 in /usr/ports/x11-toolkits/gail
>> ===> gail-1.2.0 depends on executable: gmake - found
>> ===> gail-1.2.0 depends on executable: libtool - found
>> ===> gail-1.2.0 depends on shared library: gnomecanvas-2.200 - not found
>> ===> Verifying reinstall for gnomecanvas-2.200 in
>> /usr/ports/graphics/libgnomecanvas
>> ===> libgnomecanvas-2.2.0.2 depends on executable: gmake - found
>> ===> libgnomecanvas-2.2.0.2 depends on executable: libtool - found
>> ===> libgnomecanvas-2.2.0.2 depends on shared library: glade-2.0.0 - found
>> ===> libgnomecanvas-2.2.0.2 depends on shared library: art_lgpl_2.5 - found
>> ===> libgnomecanvas-2.2.0.2 depends on shared library: X11.6 - found
>> ===> Configuring for libgnomecanvas-2.2.0.2
>> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
>> checking whether build environment is sane... yes
>> checking whether gmake sets ${MAKE}... yes
>> checking for working aclocal... missing
>> checking for working autoconf... missing
>> checking for working automake... missing
>> checking for working autoheader... missing
>> checking for working makeinfo... found
>> checking whether to enable maintainer-specific portions of Makefiles... no
>> checking for gcc... cc
>> checking for C compiler default output... a.out
>> checking whether the C compiler works... yes
>> checking whether we are cross compiling... no
>> checking for executable suffix...
>> checking for object suffix... o
>> checking whether we are using the GNU C compiler... yes
>> checking whether cc accepts -g... yes
>> checking for strerror in -lcposix... no
>> checking for gcc... (cached) cc
>> checking whether we are using the GNU C compiler... (cached) yes
>> checking whether cc accepts -g... (cached) yes
>> checking how to run the C preprocessor... cc -E
>> checking for ANSI C header files... yes
>> checking build system type... i386-unknown-freebsd4.8
>> checking host system type... i386-unknown-freebsd4.8
>> checking for ld used by GCC... /usr/libexec/elf/ld
>> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
>> checking for /usr/libexec/elf/ld option to reload object files... -r
>> checking for BSD-compatible nm... /usr/bin/nm -B
>> checking whether ln -s works... yes
>> checking how to recognise dependant libraries... pass_all
>> checking command to parse /usr/bin/nm -B output... ok
>> checking for dlfcn.h... yes
>> checking for ranlib... ranlib
>> checking for strip... strip
>> checking for objdir... .libs
>> checking for cc option to produce PIC... -fPIC
>> checking if cc PIC flag -fPIC works... yes
>> checking if cc static flag -static works... yes
>> checking if cc supports -c -o file.o... yes
>> checking if cc supports -c -o file.lo... no
>> checking if cc supports -fno-rtti -fno-exceptions... yes
>> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries...
>> yes
>> checking how to hardcode library paths into programs... immediate
>> checking whether stripping libraries is possible... yes
>> checking dynamic linker characteristics... freebsd4.8 ld.so
>> checking if libtool supports shared libraries... yes
>> checking whether -lc should be explicitly linked in... yes
>> creating libtool
>> checking host system type... i386-unknown-freebsdelf4.8
>> checking for ranlib... ranlib
>> checking whether we are using GNU C... yes
>> checking for object suffix... o
>> checking for executable suffix... no
>> checking for cc option to produce PIC... -fPIC
>> checking if cc PIC flag -fPIC works... yes
>> checking if cc supports -c -o file.o... yes
>> checking if cc supports -c -o file.lo... yes
>> checking if cc supports -fno-rtti -fno-exceptions ... yes
>> checking if cc static flag -static works... -static
>> checking whether ln -s works... yes
>> checking for ld used by GCC... /usr/libexec/elf/ld
>> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
>> checking whether the linker (/usr/libexec/elf/ld) supports shared libraries...
>> yes
>> checking for BSD-compatible nm... /usr/bin/nm -B
>> checking command to parse /usr/bin/nm -B output... ok
>> checking how to hardcode library paths into programs... immediate
>> checking for /usr/libexec/elf/ld option to reload object files... -r
>> checking dynamic linker characteristics... freebsdelf4.8 ld.so
>> checking if libtool supports shared libraries... yes
>> checking whether to build shared libraries... yes
>> checking whether to build static libraries... yes
>> checking for objdir... .libs
>> creating libtool
>> checking for bison... bison -y
>> checking for xrdb... /usr/X11R6/bin/xrdb
>> checking what warning flags to pass to the C compiler...
>> checking what language compliance flags to pass to the C compiler...
>> checking for ranlib... (cached) ranlib
>> checking for cc option to accept ANSI C... none needed
>> checking for an ANSI C-conforming const... yes
>> checking for inline... inline
>> checking for sys/types.h... yes
>> checking for sys/stat.h... yes
>> checking for stdlib.h... yes
>> checking for string.h... yes
>> checking for memory.h... yes
>> checking for strings.h... yes
>> checking for inttypes.h... yes
>> checking for stdint.h... no
>> checking for unistd.h... yes
>> checking for off_t... yes
>> checking for size_t... yes
>> checking for working alloca.h... no
>> checking for alloca... yes
>> checking for stdlib.h... (cached) yes
>> checking for unistd.h... (cached) yes
>> checking for getpagesize... yes
>> checking for working mmap... yes
>> checking for argz.h... no
>> checking for limits.h... yes
>> checking for locale.h... yes
>> checking for nl_types.h... yes
>> checking for malloc.h... yes
>> checking for string.h... (cached) yes
>> checking for unistd.h... (cached) yes
>> checking for sys/param.h... yes
>> checking for getcwd... yes
>> checking for munmap... yes
>> checking for putenv... yes
>> checking for setenv... yes
>> checking for setlocale... yes
>> checking for strchr... yes
>> checking for strcasecmp... yes
>> checking for strdup... yes
>> checking for __argz_count... no
>> checking for __argz_stringify... no
>> checking for __argz_next... no
>> checking for LC_MESSAGES... yes
>> checking for libintl.h... yes
>> checking for dgettext in libc... no
>> checking for bindtextdomain in -lintl... yes
>> checking for dgettext in -lintl... yes
>> checking if -liconv is needed to use gettext...
>> checking for dcgettext in -lintl... yes
>> checking for msgfmt... /usr/local/bin/msgfmt
>> checking for dcgettext... yes
>> checking for gmsgfmt... /usr/local/bin/msgfmt
>> checking for xgettext... /usr/local/bin/xgettext
>> checking for catalogs to be installed... am ar az be bg ca da de el es et fa
>> fi fr he hi hu id it ja kn ko lv mk mn ms nl nn no pl pt pt_BR ro ru sk sl sv
>> ta tr uk vi wa zh_CN zh_TW
>> checking for pkg-config... /usr/local/bin/pkg-config
>> checking for gtk+-2.0 >= 2.0.3 libart-2.0 >= 2.3.8 pango >= 1.0.1 pangoft2 >=
>> 1.0.1... gnome-config: not found
>> gnome-config: not found
>> Package pangoft2 was not found in the pkg-config search path.
>> Perhaps you should add the directory containing `pangoft2.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'pangoft2' found
>>
>> configure: error: Library requirements (gtk+-2.0 >= 2.0.3 libart-2.0 >= 2.3.8
>> pango >= 1.0.1 pangoft2 >= 1.0.1) not met; consider adjusting the
>> PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard
>> prefix so pkg-config can find them.
>> ===> Script "configure" failed unexpectedly.
>> Please report the problem to gnome at FreeBSD.org [maintainer] and attach
>> the
>> "/usr/ports/graphics/libgnomecanvas/work/libgnomecanvas-2.2.0.2/config.lo
>> g"
>> including the output of the failure of your make command. Also, it might
>> be a good idea to provide an overview of all packages installed on your
>> system (e.g. an `ls /var/db/pkg`).
>> *** Error code 1
>>
>> Stop in /usr/ports/graphics/libgnomecanvas.
>> *** Error code 1
>>
>> Stop in /usr/ports/graphics/libgnomecanvas.
>> *** Error code 1
>>
>> Stop in /usr/ports/x11-toolkits/gail.
>> *** Error code 1
>>
>> Stop in /usr/ports/x11-toolkits/gail.
>> *** Error code 1
>>
>> Stop in /usr/ports/x11/gnomeapplets2.
>> *** Error code 1
>>
>> Stop in /usr/ports/x11/gnomeapplets2.
>> *** Error code 1
>>
>> Stop in /usr/ports/x11/gnome2.
>> *** Error code 1
>>
>> Stop in /usr/ports/x11/gnome2.
>> # exit
>>
>> Script done on Mon Apr 7 13:38:50 2003
>>
>> the pkg db is:
>>
>>
>> XFree86-4.2.0_1,1
>> XFree86-FontServer-4.2.0
>> XFree86-Server-4.2.1_3
>> XFree86-clients-4.2.1_1
>> XFree86-documents-4.2.0
>> XFree86-font100dpi-4.2.0
>> XFree86-font75dpi-4.2.0
>> XFree86-fontCyrillic-4.2.0_4
>> XFree86-fontDefaultBitmaps-4.2.0
>> XFree86-fontEncodings-4.2.0
>> XFree86-fontScalable-4.2.0
>> XFree86-libraries-4.2.1_1
>> Xaw3d-1.5
>> agrep-2.04
>> aspell-0.50.1_2
>> bash-2.05b.004
>> bison-1.75
>> bounce-1.0
>> cscope-15.4
>> cvsup-without-gui-16.1g
>> ddc-1.0
>> dhcpconf-0.7.3
>> dhcping-1.2
>> dict-1.7.1
>> dictfmt-1.6.1
>> dictionary-emacs21-1.8.2
>> emacs-21.2_1
>> expat-1.95.5
>> ezm3-1.0
>> freetype2-2.1.2
>> gdbm-1.8.3
>> gettext-0.11.5_1
>> glib-1.2.10_7
>> gmake-3.79.1_3
>> gtk-1.2.10_8
>> imake-4.2.0_1
>> ispell-3.2.06_2
>> jpeg-6b_1
>> libgnugetopt-1.2
>> libiconv-1.8_1
>> libslang-1.4.8
>> libtool-1.3.4_4
>> libungif-4.1.0b1
>> linux_base-7.1_1
>> m4-1.4_1
>> mpd-3.12
>> mtools-3.9.8_1
>> newt-noi18n-0.51.0
>> pkgconfig-0.12.0
>> png-1.2.4
>> popt-1.6.4
>> python-2.2.2_2
>> tcl-8.3.4_4
>> tiff-3.5.7
>> vim-6.1.183
>> wrapper-1.0_2
>> zsh-4.0.6
>>
>> And the libgnomecanvas-2.2.0.2-config.log reads:
>>
>>
>> This file contains any messages produced by compilers while
>> running configure, to aid debugging if configure makes a mistake.
>>
>> It was created by configure, which was
>> generated by GNU Autoconf 2.52. Invocation command line was
>>
>> $ ./configure --with-html-dir=/usr/X11R6/share/doc --disable-gtk-doc
>> --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include
>> --prefix=/usr/X11R6 --target=i386-unknown-freebsd4.8
>>
>> ## ---------- ##
>> ## Platform. ##
>> ## ---------- ##
>>
>> hostname = tinlizzie
>> uname -m = i386
>> uname -r = 4.8-STABLE
>> uname -s = FreeBSD
>> uname -v = FreeBSD 4.8-STABLE #12: Mon Apr 7 11:05:48 EDT 2003
>> root at tinlizzie:/usr/obj/usr/src/sys/TINLIZZIE
>>
>> /usr/bin/uname -p = i386
>> /bin/uname -X = unknown
>>
>> /bin/arch = unknown
>> /usr/bin/arch -k = unknown
>> /usr/convex/getsysinfo = unknown
>> hostinfo = unknown
>> /bin/machine = unknown
>> /usr/bin/oslevel = unknown
>> /bin/universe = unknown
>>
>> PATH = /sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/X11R6/
>> bin:/home/root/bin:/root/bin
>>
>> ## ------------ ##
>> ## Core tests. ##
>> ## ------------ ##
>>
>> configure:1130: PATH=".;."; conftest.sh
>> conftest.sh: not found
>> configure:1133: $? = 127
>> configure:1205: checking for a BSD compatible install
>> configure:1254: result: /usr/bin/install -c -o root -g wheel
>> configure:1265: checking whether build environment is sane
>> configure:1308: result: yes
>> configure:1323: checking whether gmake sets ${MAKE}
>> configure:1343: result: yes
>> configure:1371: checking for working aclocal
>> configure:1382: result: missing
>> configure:1386: checking for working autoconf
>> configure:1397: result: missing
>> configure:1401: checking for working automake
>> configure:1412: result: missing
>> configure:1416: checking for working autoheader
>> configure:1427: result: missing
>> configure:1431: checking for working makeinfo
>> configure:1438: result: found
>> configure:1446: checking whether to enable maintainer-specific portions of
>> Makefiles
>> configure:1455: result: no
>> configure:1510: checking for gcc
>> configure:1533: result: cc
>> configure:1761: checking for C compiler version
>> configure:1764: cc --version </dev/null >&5
>> 2.95.4
>> configure:1767: $? = 0
>> configure:1769: cc -v </dev/null >&5
>> Using builtin specs.
>> gcc version 2.95.4 20020320 [FreeBSD]
>> configure:1772: $? = 0
>> configure:1774: cc -V </dev/null >&5
>> cc: argument to `-V' is missing
>> configure:1777: $? = 1
>> configure:1797: checking for C compiler default output
>> configure:1800: cc -O -pipe -I/usr/local/include -L/usr/local/lib conftest.c
>> >&5
>> configure:1803: $? = 0
>> configure:1832: result: a.out
>> configure:1837: checking whether the C compiler works
>> configure:1843: ./a.out
>> configure:1846: $? = 0
>> configure:1861: result: yes
>> configure:1868: checking whether we are cross compiling
>> configure:1870: result: no
>> configure:1873: checking for executable suffix
>> configure:1875: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:1878: $? = 0
>> configure:1900: result:
>> configure:1906: checking for object suffix
>> configure:1924: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:1927: $? = 0
>> configure:1946: result: o
>> configure:1950: checking whether we are using the GNU C compiler
>> configure:1971: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:1974: $? = 0
>> configure:1977: test -s conftest.o
>> configure:1980: $? = 0
>> configure:1992: result: yes
>> configure:1998: checking whether cc accepts -g
>> configure:2016: cc -c -g -I/usr/local/include conftest.c >&5
>> configure:2019: $? = 0
>> configure:2022: test -s conftest.o
>> configure:2025: $? = 0
>> configure:2035: result: yes
>> configure:2062: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> conftest.c:2: syntax error before `me'
>> configure:2065: $? = 1
>> configure: failed program was:
>> #ifndef __cplusplus
>> choke me
>> #endif
>> configure:2163: checking for strerror in -lcposix
>> configure:2190: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c -lcposix >&5
>> /usr/libexec/elf/ld: cannot find -lcposix
>> configure:2193: $? = 1
>> configure: failed program was:
>> #line 2171 "configure"
>> #include "confdefs.h"
>>
>> /* Override any gcc2 internal prototype to avoid an error. */
>> #ifdef __cplusplus
>> extern "C"
>> #endif
>> /* We use char because int might match the return type of a gcc2
>> builtin and then its argument prototype would still apply. */
>> char strerror ();
>> int
>> main ()
>> {
>> strerror ();
>> ;
>> return 0;
>> }
>> configure:2210: result: no
>> configure:2259: checking for gcc
>> configure:2282: result: cc
>> configure:2510: checking for C compiler version
>> configure:2513: cc --version </dev/null >&5
>> 2.95.4
>> configure:2516: $? = 0
>> configure:2518: cc -v </dev/null >&5
>> Using builtin specs.
>> gcc version 2.95.4 20020320 [FreeBSD]
>> configure:2521: $? = 0
>> configure:2523: cc -V </dev/null >&5
>> cc: argument to `-V' is missing
>> configure:2526: $? = 1
>> configure:2529: checking whether we are using the GNU C compiler
>> configure:2571: result: yes
>> configure:2577: checking whether cc accepts -g
>> configure:2614: result: yes
>> configure:2641: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> conftest.c:2: syntax error before `me'
>> configure:2644: $? = 1
>> configure: failed program was:
>> #ifndef __cplusplus
>> choke me
>> #endif
>> configure:2747: checking how to run the C preprocessor
>> configure:2773: cc -E -I/usr/local/include conftest.c
>> configure:2779: $? = 0
>> configure:2806: cc -E -I/usr/local/include conftest.c
>> configure:2803: ac_nonexistent.h: No such file or directory
>> configure:2812: $? = 1
>> configure: failed program was:
>> #line 2802 "configure"
>> #include "confdefs.h"
>> #include <ac_nonexistent.h>
>> configure:2849: result: cc -E
>> configure:2864: cc -E -I/usr/local/include conftest.c
>> configure:2870: $? = 0
>> configure:2897: cc -E -I/usr/local/include conftest.c
>> configure:2894: ac_nonexistent.h: No such file or directory
>> configure:2903: $? = 1
>> configure: failed program was:
>> #line 2893 "configure"
>> #include "confdefs.h"
>> #include <ac_nonexistent.h>
>> configure:2942: checking for ANSI C header files
>> configure:2956: cc -E -I/usr/local/include conftest.c
>> configure:2962: $? = 0
>> configure:3049: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:3052: $? = 0
>> configure:3054: ./conftest
>> configure:3057: $? = 0
>> configure:3070: result: yes
>> configure:3152: checking build system type
>> configure:3170: result: i386-unknown-freebsd4.8
>> configure:3177: checking host system type
>> configure:3191: result: i386-unknown-freebsd4.8
>> configure:3208: checking for ld used by GCC
>> configure:3271: result: /usr/libexec/elf/ld
>> configure:3280: checking if the linker (/usr/libexec/elf/ld) is GNU ld
>> GNU ld version 2.12.1 [FreeBSD] 2002-07-20
>> configure:3292: result: yes
>> configure:3296: checking for /usr/libexec/elf/ld option to reload object files
>> configure:3303: result: -r
>> configure:3308: checking for BSD-compatible nm
>> configure:3344: result: /usr/bin/nm -B
>> configure:3347: checking whether ln -s works
>> configure:3351: result: yes
>> configure:3358: checking how to recognise dependant libraries
>> configure:3526: result: pass_all
>> configure:3532: checking command to parse /usr/bin/nm -B output
>> configure:3609: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:3612: $? = 0
>> configure:3616: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[
>> ]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3
>> \3/p' \> conftest.nm
>> configure:3619: $? = 0
>> configure:3671: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c conftstm.o >&5
>> configure:3674: $? = 0
>> configure:3715: result: ok
>> configure:3722: checking for dlfcn.h
>> configure:3732: cc -E -I/usr/local/include conftest.c
>> configure:3738: $? = 0
>> configure:3757: result: yes
>> configure:3944: checking for ranlib
>> configure:3959: found /usr/bin/ranlib
>> configure:3968: result: ranlib
>> configure:4018: checking for strip
>> configure:4033: found /usr/bin/strip
>> configure:4042: result: strip
>> configure:4556: checking for objdir
>> configure:4567: result: .libs
>> configure:4582: checking for cc option to produce PIC
>> configure:4732: result: -fPIC
>> configure:4736: checking if cc PIC flag -fPIC works
>> configure:4756: cc -c -O -pipe -fPIC -DPIC -I/usr/local/include conftest.c >&5
>> configure:4759: $? = 0
>> configure:4762: test -s conftest.o
>> configure:4765: $? = 0
>> configure:4801: result: yes
>> configure:4817: checking if cc static flag -static works
>> configure:4838: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> -static conftest.c >&5
>> configure:4841: $? = 0
>> configure:4844: test -s conftest
>> configure:4847: $? = 0
>> configure:4861: result: yes
>> configure:4872: checking if cc supports -c -o file.o
>> configure:4892: cc -c -O -pipe -o out/conftest2.o -I/usr/local/include
>> conftest.c >&5
>> configure:4916: result: yes
>> configure:4921: checking if cc supports -c -o file.lo
>> configure:4943: cc -c -O -pipe -c -o conftest.lo -I/usr/local/include
>> conftest.c >&5
>> configure:4946: $? = 0
>> configure:4949: test -s conftest.o
>> configure:4952: $? = 1
>> configure: failed program was:
>> #line 4931 "configure"
>> #include "confdefs.h"
>>
>> int
>> main ()
>> {
>> int some_variable = 0;
>> ;
>> return 0;
>> }
>> configure:4972: result: no
>> configure:5003: checking if cc supports -fno-rtti -fno-exceptions
>> configure:5022: cc -c -O -pipe -fno-rtti -fno-exceptions -c conftest.c
>> -I/usr/local/include conftest.c >&5
>> configure:5025: $? = 0
>> configure:5028: test -s conftest.o
>> configure:5031: $? = 0
>> configure:5047: result: yes
>> configure:5058: checking whether the linker (/usr/libexec/elf/ld) supports
>> shared libraries
>> configure:5670: result: yes
>> configure:5675: checking how to hardcode library paths into programs
>> configure:5699: result: immediate
>> configure:5704: checking whether stripping libraries is possible
>> configure:5709: result: yes
>> configure:5720: checking dynamic linker characteristics
>> configure:6102: result: freebsd4.8 ld.so
>> configure:6107: checking if libtool supports shared libraries
>> configure:6109: result: yes
>> configure:6673: checking whether -lc should be explicitly linked in
>> configure:6681: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:6684: $? = 0
>> configure:6698: cc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest
>> 2\>\&1 \| grep -lc \>/dev/null 2\>\&1
>> configure:6701: $? = 1
>> configure:6714: result: yes
>> configure:7279: checking for bison
>> configure:7294: found /usr/local/bin/bison
>> configure:7302: result: bison -y
>> configure:7317: checking for xrdb
>> configure:7334: found /usr/X11R6/bin/xrdb
>> configure:7345: result: /usr/X11R6/bin/xrdb
>> configure:7447: checking what warning flags to pass to the C compiler
>> configure:7449: result:
>> configure:7460: checking what language compliance flags to pass to the C
>> compiler
>> configure:7475: result:
>> configure:7525: checking for ranlib
>> configure:7549: result: ranlib
>> configure:7561: checking for cc option to accept ANSI C
>> configure:7618: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7621: $? = 0
>> configure:7624: test -s conftest.o
>> configure:7627: $? = 0
>> configure:7644: result: none needed
>> configure:7652: checking for an ANSI C-conforming const
>> configure:7716: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7719: $? = 0
>> configure:7722: test -s conftest.o
>> configure:7725: $? = 0
>> configure:7735: result: yes
>> configure:7745: checking for inline
>> configure:7762: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7765: $? = 0
>> configure:7768: test -s conftest.o
>> configure:7771: $? = 0
>> configure:7782: result: inline
>> configure:7803: checking for sys/types.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7803: checking for sys/stat.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7803: checking for stdlib.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7803: checking for string.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7803: checking for memory.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7803: checking for strings.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7803: checking for inttypes.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7803: checking for stdint.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7844: stdint.h: No such file or directory
>> configure:7818: $? = 1
>> configure: failed program was:
>> #line 7809 "configure"
>> #include "confdefs.h"
>> #include <stdio.h>
>> #if HAVE_SYS_TYPES_H
>> # include <sys/types.h>
>> #endif
>> #if HAVE_SYS_STAT_H
>> # include <sys/stat.h>
>> #endif
>> #if STDC_HEADERS
>> # include <stdlib.h>
>> # include <stddef.h>
>> #else
>> # if HAVE_STDLIB_H
>> # include <stdlib.h>
>> # endif
>> #endif
>> #if HAVE_STRING_H
>> # if !STDC_HEADERS && HAVE_MEMORY_H
>> # include <memory.h>
>> # endif
>> # include <string.h>
>> #endif
>> #if HAVE_STRINGS_H
>> # include <strings.h>
>> #endif
>> #if HAVE_INTTYPES_H
>> # include <inttypes.h>
>> #else
>> # if HAVE_STDINT_H
>> # include <stdint.h>
>> # endif
>> #endif
>> #if HAVE_UNISTD_H
>> # include <unistd.h>
>> #endif
>> #include <stdint.h>
>> configure:7834: result: no
>> configure:7803: checking for unistd.h
>> configure:7815: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7818: $? = 0
>> configure:7821: test -s conftest.o
>> configure:7824: $? = 0
>> configure:7834: result: yes
>> configure:7844: checking for off_t
>> configure:7865: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7868: $? = 0
>> configure:7871: test -s conftest.o
>> configure:7874: $? = 0
>> configure:7884: result: yes
>> configure:7896: checking for size_t
>> configure:7917: cc -c -O -pipe -I/usr/local/include conftest.c >&5
>> configure:7920: $? = 0
>> configure:7923: test -s conftest.o
>> configure:7926: $? = 0
>> configure:7936: result: yes
>> configure:7950: checking for working alloca.h
>> configure:7968: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:7957: alloca.h: No such file or directory
>> configure:7971: $? = 1
>> configure: failed program was:
>> #line 7956 "configure"
>> #include "confdefs.h"
>> #include <alloca.h>
>> int
>> main ()
>> {
>> char *p = (char *) alloca (2 * sizeof (int));
>> ;
>> return 0;
>> }
>> configure:7987: result: no
>> configure:7997: checking for alloca
>> configure:8035: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8038: $? = 0
>> configure:8041: test -s conftest
>> configure:8044: $? = 0
>> configure:8054: result: yes
>> configure:8238: checking for stdlib.h
>> configure:8273: result: yes
>> configure:8238: checking for unistd.h
>> configure:8273: result: yes
>> configure:8286: checking for getpagesize
>> configure:8323: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8326: $? = 0
>> configure:8329: test -s conftest
>> configure:8332: $? = 0
>> configure:8342: result: yes
>> configure:8352: checking for working mmap
>> configure:8488: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8491: $? = 0
>> configure:8493: ./conftest
>> configure:8496: $? = 0
>> configure:8508: result: yes
>> configure:8523: checking for argz.h
>> configure:8533: cc -E -I/usr/local/include conftest.c
>> configure:8530: argz.h: No such file or directory
>> configure:8539: $? = 1
>> configure: failed program was:
>> #line 8529 "configure"
>> #include "confdefs.h"
>> #include <argz.h>
>> configure:8558: result: no
>> configure:8523: checking for limits.h
>> configure:8533: cc -E -I/usr/local/include conftest.c
>> configure:8539: $? = 0
>> configure:8558: result: yes
>> configure:8523: checking for locale.h
>> configure:8533: cc -E -I/usr/local/include conftest.c
>> configure:8539: $? = 0
>> configure:8558: result: yes
>> configure:8523: checking for nl_types.h
>> configure:8533: cc -E -I/usr/local/include conftest.c
>> configure:8539: $? = 0
>> configure:8558: result: yes
>> configure:8523: checking for malloc.h
>> configure:8533: cc -E -I/usr/local/include conftest.c
>> In file included from configure:8530:
>> /usr/include/malloc.h:2: warning: #warning "this file includes <malloc.h>
>> which is deprecated, use <stdlib.h> instead"
>> configure:8539: $? = 0
>> configure:8558: result: yes
>> configure:8523: checking for string.h
>> configure:8558: result: yes
>> configure:8523: checking for unistd.h
>> configure:8558: result: yes
>> configure:8523: checking for sys/param.h
>> configure:8533: cc -E -I/usr/local/include conftest.c
>> configure:8539: $? = 0
>> configure:8558: result: yes
>> configure:8572: checking for getcwd
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for munmap
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for putenv
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for setenv
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for setlocale
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for strchr
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for strcasecmp
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for strdup
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8612: $? = 0
>> configure:8615: test -s conftest
>> configure:8618: $? = 0
>> configure:8628: result: yes
>> configure:8572: checking for __argz_count
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> /tmp/ccGU1VuA.o: In function `main':
>> /tmp/ccGU1VuA.o(.text+0x9): undefined reference to `__argz_count'
>> configure:8612: $? = 1
>> configure: failed program was:
>> #line 8578 "configure"
>> #include "confdefs.h"
>> /* System header to define __stub macros and hopefully few prototypes,
>> which can conflict with char __argz_count (); below. */
>> #include <assert.h>
>> /* Override any gcc2 internal prototype to avoid an error. */
>> #ifdef __cplusplus
>> extern "C"
>> #endif
>> /* We use char because int might match the return type of a gcc2
>> builtin and then its argument prototype would still apply. */
>> char __argz_count ();
>> char (*f) ();
>>
>> int
>> main ()
>> {
>> /* The GNU C library defines this for functions which it implements
>> to always fail with ENOSYS. Some functions are actually named
>> something starting with __ and the normal name is an alias. */
>> #if defined (__stub___argz_count) || defined (__stub_____argz_count)
>> choke me
>> #else
>> f = __argz_count;
>> #endif
>>
>> ;
>> return 0;
>> }
>> configure:8628: result: no
>> configure:8572: checking for __argz_stringify
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> /tmp/cc09trBX.o: In function `main':
>> /tmp/cc09trBX.o(.text+0x9): undefined reference to `__argz_stringify'
>> configure:8612: $? = 1
>> configure: failed program was:
>> #line 8578 "configure"
>> #include "confdefs.h"
>> /* System header to define __stub macros and hopefully few prototypes,
>> which can conflict with char __argz_stringify (); below. */
>> #include <assert.h>
>> /* Override any gcc2 internal prototype to avoid an error. */
>> #ifdef __cplusplus
>> extern "C"
>> #endif
>> /* We use char because int might match the return type of a gcc2
>> builtin and then its argument prototype would still apply. */
>> char __argz_stringify ();
>> char (*f) ();
>>
>> int
>> main ()
>> {
>> /* The GNU C library defines this for functions which it implements
>> to always fail with ENOSYS. Some functions are actually named
>> something starting with __ and the normal name is an alias. */
>> #if defined (__stub___argz_stringify) || defined (__stub_____argz_stringify)
>> choke me
>> #else
>> f = __argz_stringify;
>> #endif
>>
>> ;
>> return 0;
>> }
>> configure:8628: result: no
>> configure:8572: checking for __argz_next
>> configure:8609: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> /tmp/ccir6HSJ.o: In function `main':
>> /tmp/ccir6HSJ.o(.text+0x9): undefined reference to `__argz_next'
>> configure:8612: $? = 1
>> configure: failed program was:
>> #line 8578 "configure"
>> #include "confdefs.h"
>> /* System header to define __stub macros and hopefully few prototypes,
>> which can conflict with char __argz_next (); below. */
>> #include <assert.h>
>> /* Override any gcc2 internal prototype to avoid an error. */
>> #ifdef __cplusplus
>> extern "C"
>> #endif
>> /* We use char because int might match the return type of a gcc2
>> builtin and then its argument prototype would still apply. */
>> char __argz_next ();
>> char (*f) ();
>>
>> int
>> main ()
>> {
>> /* The GNU C library defines this for functions which it implements
>> to always fail with ENOSYS. Some functions are actually named
>> something starting with __ and the normal name is an alias. */
>> #if defined (__stub___argz_next) || defined (__stub_____argz_next)
>> choke me
>> #else
>> f = __argz_next;
>> #endif
>>
>> ;
>> return 0;
>> }
>> configure:8628: result: no
>> configure:8639: checking for LC_MESSAGES
>> configure:8657: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> configure:8660: $? = 0
>> configure:8663: test -s conftest
>> configure:8666: $? = 0
>> configure:8676: result: yes
>> configure:8697: checking for libintl.h
>> configure:8707: cc -E -I/usr/local/include conftest.c
>> configure:8713: $? = 0
>> configure:8732: result: yes
>> configure:8735: checking for dgettext in libc
>> configure:8753: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c >&5
>> /tmp/ccFDzCz7.o: In function `main':
>> /tmp/ccFDzCz7.o(.text+0x14): undefined reference to `libintl_dgettext'
>> configure:8756: $? = 1
>> configure: failed program was:
>> #line 8741 "configure"
>> #include "confdefs.h"
>> #include <libintl.h>
>> int
>> main ()
>> {
>> return (int) dgettext ("","")
>> ;
>> return 0;
>> }
>> configure:8772: result: no
>> configure:8779: checking for bindtextdomain in -lintl
>> configure:8806: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c -lintl >&5
>> configure:8809: $? = 0
>> configure:8812: test -s conftest
>> configure:8815: $? = 0
>> configure:8826: result: yes
>> configure:8829: checking for dgettext in -lintl
>> configure:8856: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c -lintl >&5
>> configure:8859: $? = 0
>> configure:8862: test -s conftest
>> configure:8865: $? = 0
>> configure:8876: result: yes
>> configure:8885: checking if -liconv is needed to use gettext
>> configure:8887: result:
>> configure:8889: checking for dcgettext in -lintl
>> configure:8916: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c -lintl -liconv >&5
>> configure:8919: $? = 0
>> configure:8922: test -s conftest
>> configure:8925: $? = 0
>> configure:8936: result: yes
>> configure:8961: checking for msgfmt
>> configure:8988: result: /usr/local/bin/msgfmt
>> configure:8999: checking for dcgettext
>> configure:9036: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c -lintl -liconv >&5
>> configure:9039: $? = 0
>> configure:9042: test -s conftest
>> configure:9045: $? = 0
>> configure:9055: result: yes
>> configure:9067: checking for gmsgfmt
>> configure:9096: result: /usr/local/bin/msgfmt
>> configure:9105: checking for xgettext
>> configure:9132: result: /usr/local/bin/xgettext
>> configure:9153: cc -o conftest -O -pipe -I/usr/local/include -L/usr/local/lib
>> conftest.c -lintl -liconv >&5
>> configure:9156: $? = 0
>> configure:9159: test -s conftest
>> configure:9162: $? = 0
>> configure:9225: checking for catalogs to be installed
>> configure:9234: result: am ar az be bg ca da de el es et fa fi fr he hi hu id
>> it ja kn ko lv mk mn ms nl nn no pl pt pt_BR ro ru sk sl sv ta tr uk vi wa
>> zh_CN zh_TW
>> configure:9325: checking for pkg-config
>> configure:9342: found /usr/local/bin/pkg-config
>> configure:9354: result: /usr/local/bin/pkg-config
>> configure:9371: checking for gtk+-2.0 >= 2.0.3 libart-2.0 >= 2.3.8 pango >=
>> 1.0.1 pangoft2 >= 1.0.1
>> configure:9408: error: Library requirements (gtk+-2.0 >= 2.0.3 libart-2.0 >=
>> 2.3.8 pango >= 1.0.1 pangoft2 >= 1.0.1) not met; consider adjusting the
>> PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard
>> prefix so pkg-config can find them.
>>
>> ## ----------------- ##
>> ## Cache variables. ##
>> ## ----------------- ##
>>
>> ac_cv_type_size_t=yes
>> ac_cv_path_XGETTEXT=/usr/local/bin/xgettext
>> ac_cv_func_getcwd=yes
>> gt_cv_func_dgettext_libc=no
>> ac_cv_header_stdlib_h=yes
>> lt_cv_file_magic_cmd='$MAGIC_CMD'
>> ac_cv_header_nl_types_h=yes
>> ac_cv_lib_cposix_strerror=no
>> ac_cv_prog_cc_g=yes
>> ac_cv_env_LDFLAGS_set=set
>> ac_cv_path_PKG_CONFIG=/usr/local/bin/pkg-config
>> lt_cv_prog_cc_can_build_shared=yes
>> ac_cv_c_compiler_gnu=yes
>> ac_cv_env_CFLAGS_set=set
>> ac_cv_func_setlocale=yes
>> ac_cv_func_mmap_fixed_mapped=yes
>> ac_cv_prog_make_gmake_set=yes
>> ac_cv_path_PATH_TO_XRDB=/usr/X11R6/bin/xrdb
>> ac_cv_env_CPP_value=
>> ac_cv_env_CPPFLAGS_set=set
>> ac_cv_lib_intl_dcgettext=yes
>> ac_cv_func_strcasecmp=yes
>> lt_cv_prog_cc_static_works=yes
>> lt_cv_prog_cc_no_builtin=
>> lt_cv_prog_cc_shlib=
>> ac_cv_func___argz_count=no
>> lt_cv_prog_cc_static=-static
>> ac_cv_env_host_alias_set=
>> ac_cv_path_GMSGFMT=/usr/local/bin/msgfmt
>> ac_cv_c_const=yes
>> ac_cv_prog_YACC='bison -y'
>> lt_cv_ld_reload_flag=-r
>> ac_cv_working_alloca_h=no
>> lt_cv_sys_path_separator=:
>> ac_cv_func_munmap=yes
>> ac_cv_header_sys_stat_h=yes
>> lt_cv_archive_cmds_need_lc=yes
>> lt_cv_prog_gnu_ld=yes
>> ac_cv_env_build_alias_set=
>> ac_cv_header_limits_h=yes
>> ac_cv_env_LDFLAGS_value=-L/usr/local/lib
>> ac_cv_env_target_alias_set=set
>> ac_cv_func_alloca_works=yes
>> ac_cv_prog_cc_stdc=
>> ac_cv_host_alias=i386-unknown-freebsd4.8
>> ac_cv_env_CFLAGS_value='-O -pipe '
>> ac_cv_env_CC_set=set
>> ac_cv_path_MSGFMT=/usr/local/bin/msgfmt
>> ac_cv_header_sys_types_h=yes
>> lt_cv_prog_cc_wl=-Wl,
>> ac_cv_header_stdc=yes
>> ac_cv_func___argz_stringify=no
>> ac_cv_header_strings_h=yes
>> ac_cv_func_dcgettext=yes
>> ac_cv_header_stdint_h=no
>> ac_cv_header_inttypes_h=yes
>> nls_cv_header_intl=
>> ac_cv_func___argz_next=no
>> ac_cv_func_setenv=yes
>> ac_cv_header_sys_param_h=yes
>> ac_cv_header_locale_h=yes
>> ac_cv_header_unistd_h=yes
>> ac_cv_header_string_h=yes
>> ac_cv_c_inline=inline
>> lt_cv_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern char
>> \1;/p'\'''
>> lt_cv_path_LD=/usr/libexec/elf/ld
>> ac_cv_build_alias=i386-unknown-freebsd4.8
>> ac_cv_env_CPPFLAGS_value=-I/usr/local/include
>> ac_cv_func_strchr=yes
>> ac_cv_header_memory_h=yes
>> ac_cv_prog_ac_ct_RANLIB=ranlib
>> ac_cv_prog_ac_ct_STRIP=strip
>> ac_cv_host=i386-unknown-freebsd4.8
>> ac_cv_env_host_alias_value=
>> am_cv_val_LC_MESSAGES=yes
>> ac_cv_type_off_t=yes
>> ac_cv_lib_intl_dgettext=yes
>> nls_cv_force_use_gnu_gettext=no
>> ac_cv_lib_intl_bindtextdomain=yes
>> gt_cv_func_dgettext_libintl=yes
>> lt_cv_compiler_c_o=yes
>> lt_cv_prog_cc_pic_works=yes
>> lt_cv_file_magic_test_file=
>> nls_cv_use_gnu_gettext=no
>> ac_cv_header_argz_h=no
>> ac_cv_build=i386-unknown-freebsd4.8
>> ac_cv_prog_CPP='cc -E'
>> ac_cv_env_build_alias_value=
>> ac_cv_header_malloc_h=yes
>> ac_cv_func_getpagesize=yes
>> lt_cv_prog_cc_pic=' -fPIC'
>> lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[
>> ]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3
>> \3/p'\'''
>> lt_cv_deplibs_check_method=pass_all
>> ac_cv_prog_ac_ct_CC=cc
>> ac_cv_header_libintl_h=yes
>> lt_cv_compiler_o_lo=no
>> ac_cv_env_target_alias_value=i386-unknown-freebsd4.8
>> ac_cv_env_CC_value=cc
>> lt_cv_path_NM='/usr/bin/nm -B'
>> ac_cv_env_CPP_set=
>> ac_cv_header_dlfcn_h=yes
>> nls_cv_header_libgt=
>> ac_cv_func_strdup=yes
>> ac_cv_func_putenv=yes
>> ac_cv_objext=o
>>
>> ## ------------ ##
>> ## confdefs.h. ##
>> ## ------------ ##
>>
>> #define PACKAGE "libgnomecanvas"
>> #define VERSION "2.2.0.2"
>> #define STDC_HEADERS 1
>> #define HAVE_DLFCN_H 1
>> #define GETTEXT_PACKAGE "libgnomecanvas-2.0"
>> #define HAVE_SYS_TYPES_H 1
>> #define HAVE_SYS_STAT_H 1
>> #define HAVE_STDLIB_H 1
>> #define HAVE_STRING_H 1
>> #define HAVE_MEMORY_H 1
>> #define HAVE_STRINGS_H 1
>> #define HAVE_INTTYPES_H 1
>> #define HAVE_UNISTD_H 1
>> #define HAVE_ALLOCA 1
>> #define HAVE_STDLIB_H 1
>> #define HAVE_UNISTD_H 1
>> #define HAVE_GETPAGESIZE 1
>> #define HAVE_MMAP 1
>> #define HAVE_LIMITS_H 1
>> #define HAVE_LOCALE_H 1
>> #define HAVE_NL_TYPES_H 1
>> #define HAVE_MALLOC_H 1
>> #define HAVE_STRING_H 1
>> #define HAVE_UNISTD_H 1
>> #define HAVE_SYS_PARAM_H 1
>> #define HAVE_GETCWD 1
>> #define HAVE_MUNMAP 1
>> #define HAVE_PUTENV 1
>> #define HAVE_SETENV 1
>> #define HAVE_SETLOCALE 1
>> #define HAVE_STRCHR 1
>> #define HAVE_STRCASECMP 1
>> #define HAVE_STRDUP 1
>> #define HAVE_LC_MESSAGES 1
>> #define HAVE_GETTEXT 1
>> #define HAVE_DCGETTEXT 1
>> #define ENABLE_NLS 1
>>
>>
>> configure: exit 1
>>
More information about the freebsd-gnome
mailing list