Patch to allow gmirror to set priority of a disk
Mel Flynn
mel.flynn+fbsd.fs at mailing.thruhere.net
Sun Sep 6 00:36:16 UTC 2009
Hi,
new patch containing everything and points for elegance. Double checked for
style, so I'm sure there's one or two left ;).
Since it's applies nearly clean (1 hunk -6 lines offset) on 7-STABLE, I can
runtime test it tomorrow (tonight is lvl 0 backup).
--
Mel
-------------- next part --------------
Index: sys/geom/mirror/g_mirror_ctl.c
===================================================================
--- sys/geom/mirror/g_mirror_ctl.c (revision 196868)
+++ sys/geom/mirror/g_mirror_ctl.c (working copy)
@@ -93,12 +93,12 @@
{
struct g_mirror_softc *sc;
struct g_mirror_disk *disk;
- const char *name, *balancep;
+ const char *name, *balancep, *prov;
intmax_t *slicep;
uint32_t slice;
uint8_t balance;
int *autosync, *noautosync, *failsync, *nofailsync, *hardcode, *dynamic;
- int *nargs, do_sync = 0, dirty = 1;
+ int *nargs, *priority, do_sync = 0, dirty = 1, do_priority = 0;
nargs = gctl_get_paraml(req, "nargs", sizeof(*nargs));
if (nargs == NULL) {
@@ -149,6 +149,29 @@
gctl_error(req, "No '%s' argument.", "dynamic");
return;
}
+ priority = gctl_get_paraml(req, "priority", sizeof(*priority));
+ if (priority == NULL) {
+ gctl_error(req, "No '%s' argument.", "priority");
+ return;
+ }
+ if (*priority < -1 || *priority > 255) {
+ gctl_error(req, "Priority range is 0 to 255, %i given",
+ *priority);
+ return;
+ }
+ /*
+ * Since we have a priority, we also need a provider now.
+ * Note: be WARNS safe, by always assigning prov and only throw an
+ * error if *priority != -1.
+ */
+ prov = gctl_get_asciiparam(req, "arg1");
+ if (*priority > -1) {
+ if (prov == NULL) {
+ gctl_error(req, "Priority needs a disk name");
+ return;
+ }
+ do_priority = 1;
+ }
if (*autosync && *noautosync) {
gctl_error(req, "'%s' and '%s' specified.", "autosync",
"noautosync");
@@ -189,6 +212,14 @@
slice = sc->sc_slice;
else
slice = *slicep;
+ /* Enforce usage() of -p not allowing any other options */
+ if (do_priority && (*autosync || *noautosync || *failsync ||
+ *nofailsync || *hardcode || *dynamic || *slicep != -1 ||
+ (strcmp(balancep, "none")))) {
+ gctl_error(req, "only -p accepted when setting priority");
+ sx_xunlock(&sc->sc_lock);
+ return;
+ }
if (g_mirror_ndisks(sc, -1) < sc->sc_ndisks) {
sx_xunlock(&sc->sc_lock);
gctl_error(req, "Not all disks connected. Try 'forget' command "
@@ -197,7 +228,7 @@
}
if (sc->sc_balance == balance && sc->sc_slice == slice && !*autosync &&
!*noautosync && !*failsync && !*nofailsync && !*hardcode &&
- !*dynamic) {
+ !*dynamic && !do_priority) {
sx_xunlock(&sc->sc_lock);
gctl_error(req, "Nothing has changed.");
return;
@@ -223,6 +254,19 @@
}
}
LIST_FOREACH(disk, &sc->sc_disks, d_next) {
+ /*
+ * Handle priority first, since we only need one disk, do one
+ * operation on it and then we're done. No need to check other
+ * flags, as usage doesn't allow it.
+ */
+ if (do_priority) {
+ if (strcmp(disk->d_name, prov) == 0) {
+ disk->d_priority = *priority;
+ g_mirror_update_metadata(disk);
+ break;
+ }
+ continue;
+ }
if (do_sync) {
if (disk->d_state == G_MIRROR_DISK_STATE_SYNCHRONIZING)
disk->d_flags &= ~G_MIRROR_DISK_FLAG_FORCE_SYNC;
Index: sbin/geom/core/geom.c
===================================================================
--- sbin/geom/core/geom.c (revision 196868)
+++ sbin/geom/core/geom.c (working copy)
@@ -98,11 +98,25 @@
struct g_option *opt;
unsigned i;
- fprintf(stderr, "%s %s %s", prefix, comm, cmd->gc_name);
if (cmd->gc_usage != NULL) {
- fprintf(stderr, " %s\n", cmd->gc_usage);
+ char *pos, *ptr, *sptr;
+
+ ptr = strdup(cmd->gc_usage);
+ sptr = ptr;
+ while ((pos = strchr(ptr, '\n')) != NULL) {
+ *pos = '\0';
+ fprintf(stderr, "%s %s %s", prefix, comm, cmd->gc_name);
+ fprintf(stderr, "%s\n", ptr);
+ ptr = pos + 1;
+ }
+ /* Tail or no \n at all */
+ fprintf(stderr, "%s %s %s", prefix, comm, cmd->gc_name);
+ fprintf(stderr, " %s\n", ptr);
+ free(sptr);
return;
}
+
+ fprintf(stderr, "%s %s %s", prefix, comm, cmd->gc_name);
if ((cmd->gc_flags & G_FLAG_VERBOSE) != 0)
fprintf(stderr, " [-v]");
for (i = 0; ; i++) {
Index: sbin/geom/class/mirror/geom_mirror.c
===================================================================
--- sbin/geom/class/mirror/geom_mirror.c (revision 196868)
+++ sbin/geom/class/mirror/geom_mirror.c (working copy)
@@ -47,7 +47,7 @@
static char label_balance[] = "split", configure_balance[] = "none";
static intmax_t label_slice = 4096, configure_slice = -1;
-static intmax_t insert_priority = 0;
+static intmax_t insert_priority = 0, configure_priority = -1;
static void mirror_main(struct gctl_req *req, unsigned flags);
static void mirror_activate(struct gctl_req *req);
@@ -71,10 +71,12 @@
{ 'F', "nofailsync", NULL, G_TYPE_BOOL },
{ 'h', "hardcode", NULL, G_TYPE_BOOL },
{ 'n', "noautosync", NULL, G_TYPE_BOOL },
+ { 'p', "priority", &configure_priority, G_TYPE_NUMBER },
{ 's', "slice", &configure_slice, G_TYPE_NUMBER },
G_OPT_SENTINEL
},
- NULL, "[-adfFhnv] [-b balance] [-s slice] name"
+ NULL, "[-adfFhnv] [-b balance] [-s slice] name\n"
+ "-p priority name prov"
},
{ "deactivate", G_FLAG_VERBOSE, NULL, G_NULL_OPTS, NULL,
"[-v] name prov ..."
Index: sbin/geom/class/mirror/gmirror.8
===================================================================
--- sbin/geom/class/mirror/gmirror.8 (revision 196868)
+++ sbin/geom/class/mirror/gmirror.8 (working copy)
@@ -49,6 +49,12 @@
.Op Fl s Ar slice
.Ar name
.Nm
+.Cm configure
+.Op Fl v
+.Fl p Ar priority
+.Ar name
+.Ar prov
+.Nm
.Cm rebuild
.Op Fl v
.Ar name
@@ -115,8 +121,8 @@
.It Cm label
Create a mirror.
The order of components is important, because a component's priority is based on its position
-(starting from 0).
-The component with the biggest priority is used by the
+(starting from 0 to 255).
+The component with the biggest priority (the lowest number) is used by the
.Cm prefer
balance algorithm
and is also used as a master component when resynchronization is needed,
@@ -175,6 +181,9 @@
Hardcode providers' names in metadata.
.It Fl n
Turn off autosynchronization of stale components.
+.It Fl p Ar priority
+Specifies priority for the given component
+.Ar prov .
.It Fl s Ar slice
Specifies slice size for
.Cm split
More information about the freebsd-geom
mailing list