System freeze with gvinum
Hilko Meyer
Hilko.Meyer at gmx.de
Wed Dec 3 18:02:45 PST 2008
Ulf Lilleengen schrieb:
>On man, des 01, 2008 at 12:32:22am +0100, Hilko Meyer wrote:
>> Is gvinum in 7.1RC and 7.x the same? We considered to update to 7.1
>> before it's released anyway, because we need nfe(4). And wanted to try
>> gvinum and zfs there.
>Yes, they are the same.
>>
>> But we can test a patch against 6.4 before the big update if you want.
>>
>It's really up to you. If you're going to upgrade anyway, it will at least
>save me from a little bit of work :)
Unfortunately I have some other work for you. After changing the
BIOS-setting to AHCI, I tried gvinum with 6.4 again. And strangely
enough it worked. No freeze with newfs and I could copy several GB to
the volumes, but after a reboot gvinum list looks like that:
| D sata3 State: up /dev/ad10 A: 9/476939 MB (0%)
| D sata2 State: up /dev/ad8 A: 9/476939 MB (0%)
| D sata1 State: up /dev/ad4 A: 9/476939 MB (0%)
|
| 2 volumes:
| V homes_raid5 State: down Plexes: 1 Size: 465 GB
| V dump_raid5 State: down Plexes: 1 Size: 465 GB
|
| 2 plexes:
| P homes_raid5.p0 R5 State: down Subdisks: 3 Size: 465 GB
| P dump_raid5.p0 R5 State: down Subdisks: 3 Size: 465 GB
|
| 6 subdisks:
| S homes_raid5.p0.s0 State: stale D: sata1 Size: 232 GB
| S homes_raid5.p0.s1 State: stale D: sata2 Size: 232 GB
| S homes_raid5.p0.s2 State: stale D: sata3 Size: 232 GB
| S dump_raid5.p0.s0 State: stale D: sata1 Size: 232 GB
| S dump_raid5.p0.s1 State: stale D: sata2 Size: 232 GB
| S dump_raid5.p0.s2 State: stale D: sata3 Size: 232 GB
Then we updated to FreeBSD 7.1-PRERELEASE, but nothing changed. After a
reboot the volumes are down. In dmesg I found
g_vfs_done():gvinum/dump_raid5[READ(offset=65536, length=8192)]error = 6
but I think, that occurred during a try to mount a volume.
bye,
Hilko
More information about the freebsd-geom
mailing list