[SVN-Commit] r273 - branches/experimental/Mk
svn-freebsd-gecko at chruetertee.ch
svn-freebsd-gecko at chruetertee.ch
Mon Feb 22 21:52:12 UTC 2010
Author: beat
Date: Mon Feb 22 21:52:02 2010
New Revision: 273
Log:
- Import bsd.port.mk into experimental branch
Added:
branches/experimental/Mk/bsd.port.mk
Added: branches/experimental/Mk/bsd.port.mk
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ branches/experimental/Mk/bsd.port.mk Mon Feb 22 21:52:02 2010 (r273)
@@ -0,0 +1,6442 @@
+#-*- mode: makefile; tab-width: 4; -*-
+# ex:ts=4
+#
+# $FreeBSD: ports/Mk/bsd.port.mk,v 1.635 2010/02/05 21:18:15 skv Exp $
+# $NetBSD: $
+#
+# bsd.port.mk - 940820 Jordan K. Hubbard.
+# This file is in the public domain.
+#
+# Please view me with 4 column tabs!
+
+# This is the master file for the most common elements to all port
+# Makefile in the ports system. For a more general overview of its
+# use and importance, see the Porter's Handbook.
+
+# There are two different types of "maintainers" in the ports framework.
+# The maintainer alias of the bsd.port.mk file is listed below in the
+# FreeBSD_MAINTAINER entry. You should consult them if you have any
+# questions/suggestions regarding this file.
+#
+# DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF, EVEN IF YOU DID NOT GET
+# A RESPONSE FROM THE MAINTAINER(S) WITHIN A REASONABLE TIMEFRAME! ALL
+# UNAUTHORISED CHANGES WILL BE UNCONDITIONALLY REVERTED!
+
+FreeBSD_MAINTAINER= portmgr at FreeBSD.org
+
+# For each port, the MAINTAINER variable is what you should consult for
+# contact information on the person(s) to contact if you have questions/
+# suggestions about that specific port. By default (if no MAINTAINER
+# is listed), a port is maintained by the subscribers of the ports at FreeBSD.org
+# mailing list, and any correspondence should be directed there.
+#
+# MAINTAINER - The e-mail address of the contact person for this port.
+# Default: ports at FreeBSD.org
+#
+# These are meta-variables that are automatically set to the system
+# you are running on. These are provided in case you need to take
+# different actions for different values.
+#
+# ARCH - The architecture of the target machine, such as would be
+# returned by "uname -p". (Note: Ports should test against
+# ARCH, and not the host machine's architecture which is
+# MACHINE_ARCH, to enable ports to be cross-built.)
+# OPSYS - Portability clause. This is the operating system the
+# makefile is being used on. Automatically set to
+# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
+# OSREL - The release version (numeric) of the operating system.
+# OSVERSION - The value of __FreeBSD_version.
+#
+# This is the beginning of the list of all variables that need to be
+# defined in a port, listed in order that they should be included
+# to fit in with existing conventions. (Exception: MAINTAINER actually
+# should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP).
+#
+# These variables are used to identify your port.
+#
+# PORTNAME - Name of software. Mandatory.
+# PORTVERSION - Version of software. Mandatory when no DISTVERSION is given.
+# PORTREVISION - Version of port. Optional. Commonly used to indicate
+# that an update has happened that affects the port
+# framework itself, but not the distributed software
+# (e.g., local patches or Makefile changes).
+# PORTEPOCH - Optional. In certain odd cases, the PORTREVISION logic
+# can be fooled by ports that appear to go backwards
+# numerically (e.g. if port-0.3 is newer than port-1998).
+# In this case, incrementing PORTEPOCH forces the revision.
+# Default: 0 (no effect).
+# PKGNAME - Always defined as
+# ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}.
+# Do not define this in your Makefile.
+# PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc.
+# Optional.
+# PKGNAMESUFFIX - Suffix to specify compilation options. Optional.
+# PKGVERSION - Always defined as
+# ${PORTVERSION}.
+# Do not define this in your Makefile.
+# UNIQUENAME - A name for your port that is globally unique. By default,
+# this is set to ${LATEST_LINK} when LATEST_LINK is set,
+# and to ${PKGNAMEPREFIX}${PORTNAME} otherwise.
+# DISTVERSION - Vendor version of the distribution.
+# Default: ${PORTVERSION}
+# DISTNAME - Name of port or distribution used in generating
+# WRKSRC and DISTFILES below.
+# Default:
+# ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX}
+# CATEGORIES - A list of descriptive categories into which this port falls.
+# Mandatory.
+#
+# These variable describe how to fetch files required for building the port.
+#
+# DISTFILES - Name(s) of archive file(s) containing distribution.
+# Set this to an empty string if the port doesn't require it.
+# Default: ${DISTNAME}${EXTRACT_SUFX}
+# EXTRACT_SUFX - Suffix for archive names
+# You never have to set both DISTFILES and EXTRACT_SUFX.
+# Default: .tar.bz2 if USE_BZIP2 is set, .zip if USE_ZIP is
+# set, .run if USE_MAKESELF is set, .tar.gz otherwise).
+# MASTER_SITES - Primary location(s) for distribution files if not found
+# locally. See bsd.sites.mk for common choices for
+# MASTER_SITES.
+# MASTER_SITE_SUBDIR
+# - Subdirectory of MASTER_SITES. Will sometimes need to be
+# set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE.
+# Only guaranteed to work for choices of ${MASTER_SITES}
+# defined in bsd.sites.mk.
+# Default: not set.
+# PATCHFILES - Name(s) of additional files that contain distribution
+# patches. Make will look for them at PATCH_SITES (see below).
+# They will automatically be uncompressed before patching if
+# the names end with ".gz", ".bz2" or ".Z".
+# Default: not set.
+# PATCH_SITES - Primary location(s) for distribution patch files
+# if not found locally.
+# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} and
+# ${PATCHFILES} will be put in this subdirectory of
+# ${DISTDIR} (see below). Also they will be fetched in this
+# subdirectory from FreeBSD mirror sites.
+# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
+# IGNOREFILES - If set, don't perform checksum checks on these files.
+# NOFETCHFILES - If set, don't download these files from the ${MASTER_SITES}
+# or ${MASTER_SITE_BACKUP} (but do from
+# ${MASTER_SITE_OVERRIDE})
+# EXTRACT_ONLY - If set, a subset of ${DISTFILES} you want to
+# actually extract.
+# ALWAYS_KEEP_DISTFILES
+# - If set, the package building cluster will save the distfiles
+# along with the packages. This may be required to comply with
+# some licenses, e.g. GPL in some cases.
+# Default: not set.
+#
+# (NOTE: by convention, the MAINTAINER entry (see above) should go here.)
+#
+# These variables are typically set in /etc/make.conf to indicate
+# the user's preferred location to fetch files from. You should
+# rarely need to set these.
+#
+# MASTER_SITE_BACKUP
+# - Backup location(s) for distribution files and patch
+# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
+# Default:
+# ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
+# MASTER_SITE_OVERRIDE
+# - If set, override the MASTER_SITES setting with this
+# value.
+# MASTER_SITE_FREEBSD
+# - If set, only use ${MASTER_SITE_BACKUP} for
+# MASTER_SITES.
+# CD_MOUNTPTS - List of CDROM mountpoints to look for distfiles under.
+# This variable supercedes CD_MOUNTPT, which is
+# obsolete.
+#
+# Set these if your port should not be built under certain circumstances.
+# These are string variables; you should set them to the reason why
+# they are necessary.
+#
+# RESTRICTED - Prevent the distribution of distfiles and packages to
+# the FTP sites or on CDROM (e.g. forbidden by license
+# considerations).
+# NO_CDROM - Packages and distfiles may not go on CDROM (e.g. must
+# not be re-sold) but can go on FTP sites.
+# NO_PACKAGE - Port should not be packaged for ftp sites or CDROMs,
+# but distfiles can be put on ftp sites and CDROMs.
+# FORBIDDEN - Package build should not be attempted because of
+# security vulnerabilities.
+# IGNORE - Package build should be skipped entirely (e.g.
+# because of serious unfixable problems in the build,
+# because it cannot be manually fetched, etc). Error
+# logs will not appear on pointyhat, so this should be
+# used sparingly.
+# BROKEN - Port is believed to be broken. Package builds will
+# still be attempted on the pointyhat package cluster to
+# test this assumption.
+# DEPRECATED - Port is deprecated to install. Advisory only.
+# EXPIRATION_DATE
+# - If DEPRECATED is set, determines a date when
+# the port is planed to remove. The date format is
+# ISO 8601 (YYYY-MM-DD).
+#
+# DISABLE_VULNERABILITIES
+# - If set, do not check if the port is listed in the
+# vulnerabilities database.
+#
+# In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles
+# or patchfiles have redistribution restrictions, set the following
+# to the list of such files.
+#
+# RESTRICTED_FILES
+# - List of files that cannot be redistributed.
+# Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED
+# or NO_CDROM is set, empty otherwise.
+#
+# These variables are booleans, so you don't need to set them to the reason.
+#
+# IS_INTERACTIVE
+# - Set this if your port needs to interact with the user
+# during any step in a package build. User can then decide
+# to skip this port by setting ${BATCH}, or compiling only
+# the interactive ports by setting ${INTERACTIVE}.
+# Default: not set.
+# USE_SUBMAKE - Set this if you want that each of the port's main 6 targets
+# (extract, patch, configure, build, install and package) to be
+# executed in a separate make(1) process. Useful when one of
+# the stages needs to influence make(1) variables of the later
+# stages using ${WRKDIR}/Makefile.inc generated on the fly.
+# Default: not set.
+#
+# Set these if your port only makes sense to certain architectures.
+# They are lists containing names for them (e.g., "alpha i386").
+# (Defaults: not set.)
+#
+# ONLY_FOR_ARCHS
+# - Only build ports if ${ARCH} matches one of these.
+# NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these.
+# ONLY_FOR_ARCHS_REASON
+# ONLY_FOR_ARCHS_REASON_${ARCH}
+# - Reason why it's only for ${ONLY_FOR_ARCHS}s
+# NOT_FOR_ARCHS_REASON
+# NOT_FOR_ARCHS_REASON_${ARCH}
+# - Reason why it's not for ${NOT_FOR_ARCHS}s
+# IA32_BINARY_PORT
+# - Set this instead of ONLY_FOR_ARCHS if the given port
+# fetches and installs compiled i386 binaries.
+#
+# Dependency checking. Use these if your port requires another port
+# not in the list below. (Default: empty.)
+#
+# EXTRACT_DEPENDS
+# - A list of "path:dir[:target]" tuples of other ports this
+# package depends on in the "extract" stage. "path" is
+# the name of a file if it starts with a slash (/), an
+# executable otherwise. make will test for the existence
+# (if it is a full pathname) or search for it in your
+# $PATH (if it is an executable) and go into "dir" to do
+# a "make all install" if it's not found. If the third
+# field ("target") exists, it will be used instead of
+# ${DEPENDS_TARGET}.
+# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# package depends on in the "patch" stage. "path" is the
+# name of a file if it starts with a slash (/), an
+# executable otherwise. make will test for the existence
+# (if it is a full pathname) or search for it in your
+# $PATH (if it is an executable) and go into "dir" to do
+# a "make all install" if it's not found. If the third
+# field ("target") exists, it will be used instead of
+# ${DEPENDS_TARGET}.
+# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# package depends in the "fetch" stage. "path" is the
+# name of a file if it starts with a slash (/), an
+# executable otherwise. make will test for the
+# existence (if it is a full pathname) or search for
+# it in your $PATH (if it is an executable) and go
+# into "dir" to do a "make all install" if it's not
+# found. If the third field ("target") exists, it will
+# be used instead of ${DEPENDS_TARGET}.
+# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# package depends to build (between the "extract" and
+# "build" stages, inclusive). The test done to
+# determine the existence of the dependency is the
+# same as FETCH_DEPENDS. If the third field ("target")
+# exists, it will be used instead of ${DEPENDS_TARGET}.
+# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# package depends to run. The test done to determine
+# the existence of the dependency is the same as
+# FETCH_DEPENDS. This will be checked during the
+# "install" stage and the name of the dependency will
+# be put into the package as well. If the third field
+# ("target") exists, it will be used instead of
+# ${DEPENDS_TARGET}.
+# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
+# package depends on. "lib" is the name of a shared library.
+# make will use "ldconfig -r" to search for the library.
+# lib can contain extended regular expressions.
+# DEPENDS_TARGET
+# - The default target to execute when a port is calling a
+# dependency.
+# Default: install
+#
+# These variables control options about how a port gets built and/or
+# are shorthand notations for common sets of dependencies.
+# Use these if your port uses some of the common software packages. By
+# convention these should be set to 'yes', although they only need to be
+# defined. Defaults: not set, unless explicitly indicated below.
+#
+# Note: the distinction between the USE_* and WANT_* variables, and the
+# WITH_* and WITHOUT_* variables, are that the former are restricted to
+# usage inside the ports framework, and the latter are reserved for user-
+# settable options. (Setting USE_* in /etc/make.conf is always wrong).
+#
+# WITH_DEBUG - If set, debugging flags are added to CFLAGS and the
+# binaries don't get stripped by INSTALL_PROGRAM.
+# Besides, individual ports might add their specific
+# to produce binaries for debugging purposes.
+# You can override the debug flags that are passed to
+# the compiler by setting DEBUG_FLAGS. It is set to
+# "-g" at default.
+#
+# USE_BZIP2 - If set, this port tarballs use bzip2, not gzip, for
+# compression.
+# USE_ZIP - If set, this port distfile uses zip, not tar w/[bg]zip
+# for compression.
+# USE_MAKESELF - If set, this port distfile uses makeself, not tar w/[bg]zip
+# for compression.
+# USE_DOS2UNIX - If set to "YES", remove the ^M from all files
+# under ${WRKSRC}. If set to a string, remove in all
+# files under ${WRKSRC} with one of these names the ^Ms.
+# DOS2UNIX_REGEX
+# - Limit the ^M removal to files which name matches
+# the regular expression.
+# USE_GCC - If set, this port requires this version of gcc, either in
+# the system or installed from a port.
+# USE_CSTD - Override the default C language standard (gnu89, gnu99)
+# USE_GMAKE - If set, this port uses gmake.
+# GMAKE - Set to path of GNU make if not in $PATH.
+# Default: gmake
+##
+# USE_ICONV - If set, this port uses libiconv.
+# USE_GETTEXT - If set, this port uses GNU gettext (libintl).
+##
+# USE_PERL5 - If set, this port uses perl5 in one or more of the extract,
+# patch, build, install or run phases.
+# USE_PERL5_BUILD
+# - If set, this port uses perl5 in one or more of the extract,
+# patch, build or install phases.
+# USE_PERL5_RUN - If set, this port uses perl5 for running.
+# PERL5 - Set to full path of perl5, either in the system or
+# installed from a port.
+# PERL - Set to full path of perl5, either in the system or
+# installed from a port, but without the version number.
+# Use this if you need to replace "#!" lines in scripts.
+# PERL_VERSION - Full version of perl5 (see below for current value).
+# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where
+# M is major version, N is minor version, and P is
+# the patch level. E.g., PERL_VERSION=5.8.1 would give
+# a PERL_LEVEL of 500801. This can be used in comparisons
+# to determine if the version of perl is high enough,
+# whether a particular dependency is needed, etc.
+# PERL_ARCH - Directory name of architecture dependent libraries
+# (value: ${ARCH}-freebsd).
+# PERL_PORT - Name of the perl port that is installed
+# (value: perl5)
+# SITE_PERL - Directory name where site specific perl packages go.
+# This value is added to PLIST_SUB.
+# PERL_MODBUILD - Use Module::Build to configure, build and install port.
+##
+# USE_GHOSTSCRIPT
+# - If set, this port needs ghostscript to both
+# build and run. If a number is specified,
+# the specified version will be used.
+# The valid value is '7' or '8' in that case.
+# USE_GHOSTSCRIPT_BUILD
+# - If set, this port needs ghostscript to build.
+# USE_GHOSTSCRIPT_RUN
+# - If set, this port needs ghostscript to run.
+# GHOSTSCRIPT_PORT
+# - The port that provides postscript functionality.
+# Some installations may wish to override the default
+# to specify a version without X11 and/or localized
+# versions for their nationality.
+# Default: print/ghostscript8
+# WITH_GHOSTSCRIPT_VER
+# - If set, the specified version of ghostscript will be
+# used. The valid value is "7" or "8". Note that
+# this is for users, not for port maintainers. This
+# should not be used in Makefile.
+##
+# USE_BISON - Implies that the port uses bison in one way or another:
+# 'yes' (backwards compatibility) - use bison for building
+# new features: 'build', 'run', 'both', implying build,
+# runtime, and both build/run dependencies
+##
+# USE_IMAKE - If set, this port uses imake.
+# XMKMF - Set to path of `xmkmf' if not in $PATH
+# Default: xmkmf -a
+# USE_XLIB - If set, this port uses the X libraries. In the USE_LINUX
+# case the linux X libraries are referenced.
+# USE_DISPLAY - If set, this ports requires a (virtual) X11 environment
+# setup. If the environment variable DISPLAY Is not set,
+# then an extra build dependency on Xvfb is added. Further,
+# if PACKAGE_BUILDING is not set, then CONFIGURE_ENV and
+# MAKE_ENV are extended with a DISPLAY variable.
+#
+# USE_FREETYPE - If set, this port uses the freetype print libraries.
+# USE_GL - A list of Mesa or GL related dependencies needed by the port.
+# Supported components are: glut, glu, glw, gl and linux.
+# If set to "yes", this is equivalent to "glu". Note that
+# glut depends on glu, glw and glu depend on gl.
+# USE_MOTIF - If set, this port uses a Motif toolkit. Implies USE_XORG+= xpm
+# NO_OPENMOTIF - If set, this port uses a custom Motif toolkit
+# instead of Openmotif.
+# Used only when USE_MOTIF is set.
+# WANT_LESSTIF - If set, this port uses Lesstif as Motif toolkit.
+# Used only when USE_MOTIF is set. Implies
+# NO_OPENMOTIF.
+##
+# USE_SDL - If set, this port uses the sdl libraries.
+# See bsd.sdl.mk for more information.
+##
+# USE_OPENAL - If set, this port relies on the OpenAL package.
+# Legal values are: al, soft, si, alut.
+# If set to an unknown value, the port is marked broken.
+# WANT_OPENAL - User-specific OpenAL wishes.
+# Legal values are: soft, si. The default is soft.
+##
+# USE_OPENSSL - If set, this port relies on the OpenSSL package.
+##
+# USE_OPENLDAP - If set, this port uses the OpenLDAP libraries.
+# Implies: WANT_OPENLDAP_VER?=24
+# WANT_OPENLDAP_VER
+# - Legal values are: 23, 24
+# If set to an unknown value, the port is marked BROKEN.
+# WANT_OPENLDAP_SASL
+# - If set, the system should use OpenLDAP libraries
+# with SASL support.
+##
+# USE_FAM - If set, this port uses the File Alteration Monitor.
+#
+# WANT_FAM_SYSTEM
+# - Legal values are: gamin (default),fam
+# If set to an unknown value, the port is marked IGNORE.
+##
+# USE_AUTOTOOLS - If set, this port uses various GNU autotools
+# (libtool, autoconf, autoheader, automake et al.)
+# See bsd.autotools.mk for more details.
+##
+# USE_SCONS - If set, this port uses the Python-based SCons build system
+# See bsd.scons.mk for more details.
+##
+# USE_EFL - If set, this port use EFL libraries.
+# Implies inclusion of bsd.efl.mk. (Also see
+# that file for more information on USE_EFL_*).
+# USE_FPC - If set, this port relies on the Free Pascal language.
+# Implies inclusion of bsd.fpc.mk. (Also see
+# that file for more information on WANT_FPC_*).
+# USE_JAVA - If set, this port relies on the Java language.
+# Implies inclusion of bsd.java.mk. (Also see
+# that file for more information on USE_JAVA_*).
+# USE_OCAML - If set, this port relies on the OCaml language.
+# Implies inclusion of bsd.ocaml.mk. (Also see
+# that file for more information on USE_OCAML*).
+# USE_PYTHON - If set, this port relies on the Python language.
+# Implies inclusion of bsd.python.mk. (Also see
+# that file for more information on USE_PYTHON_*
+# and USE_PYDISTUTILS).
+# USE_RUBY - If set, this port relies on the Ruby language.
+# Implies inclusion of bsd.ruby.mk. (Also see
+# that file for more information on USE_RUBY_*).
+# USE_GNUSTEP - If set, this port relies on the GNUstep system.
+# Implies the inclusion of bsd.gnustep.mk.
+# (Also see that file for more information on
+# USE_GNUSTEP_*).
+##
+# USE_GECKO - If set, this port uses the Gecko/Mozilla product.
+# See bsd.gecko.mk for more details.
+##
+# USE_GNOME - A list of the Gnome dependencies the port has (e.g.,
+# glib12, gtk12). Implies that the port needs Gnome.
+# Implies inclusion of bsd.gnome.mk. See bsd.gnome.mk
+# or http://www.FreeBSD.org/gnome/docs/porting.html
+# for more details.
+##
+# USE_LUA - If set, this port uses the Lua library and related
+# components. See bsd.lua.mk for more details.
+##
+# USE_WX - If set, this port uses the WxWidgets library and related
+# components. See bsd.wx.mk for more details.
+##
+# USE_KDEBASE_VER - Set to 3 to use the KDE windowing system.
+# Implies inclusion of bsd.kde.mk.
+#
+# USE_KDELIBS_VER - Set to 3 to use the KDE libraries.
+# Implies inclusion of bsd.kde.mk.
+#
+# USE_KDE4 - A list of the KDE4 dependencies the port has (e.g.,
+# kdelibs, kdebase). Implies that the port needs KDE.
+# Implies inclusion of bsd.kde4.mk. See bsd.kde4.mk
+# for more details.
+#
+# USE_QT_VER - Set to 3 or 4 to use the respective version
+# of the QT libraries.
+# Implies inclusion of bsd.kde.mk.
+#
+# USE_LINUX - Set to yes to say the port needs the default linux base port.
+# Set to value <X>, if the port needs emulators/linux_base-<X>.
+# If set to "7", a dependency is registered to emulators/linux_base.
+# Implies appropriate settings for STRIP and STRIP_CMD.
+# USE_LINUX_PREFIX
+# - controls the action of PREFIX (see above). Only use this
+# if the port is a linux infrastructure port (e.g. contains libs
+# or a sound server which supports the FreeBSD native one),
+# use the default or the X11 prefix if it's a leaf port
+# (e.g. a game or program).
+# Implies NO_MTREE=yes, and, if INSTALLS_SHLIB is defined:
+# - USE_LINUX=yes
+# - appropriate invocation of the Linux ldconfig
+# USE_LINUX_RPM - Set to yes to pull in variables and targets useful to Linux
+# RPM ports.
+# Implies inclusion of bsd.linux-rpm.mk.
+#
+# LINUX_OSRELEASE - Contains the value of compat.linux.osrelease sysctl.
+# Will be used to distinguish which linux
+# infrastructure ports should be used.
+# Valid values: 2.4.2, 2.6.16.
+# AUTOMATIC_PLIST
+# - Set to yes to enable automatic packing list generation.
+# Currently has no effect unless USE_LINUX_RPM is set.
+#
+# OVERRIDE_LINUX_BASE_PORT
+# - This specifies the default linux base to use, for valid
+# values have a look at the description of USE_LINUX. This is
+# an user-only variable. Don't use it in any port, it's meant
+# to be used in make.conf.
+#
+# LINUX_BASE_PORT
+# - This is a read-only variable, it gets set to a value which is
+# usable in *_DEPENDS (e.g. BUILD_DEPENDS=${LINUX_BASE_PORT}).
+# It honors USE_LINUX=foo and OVERRIDE_LINUX_BASE_PORT.
+##
+# USE_XORG - Set to a list of X.org module dependencies.
+# Implies inclusion of bsd.xorg.mk.
+##
+# USE_RC_SUBR - If set, the ports startup/shutdown script uses the common
+# routines found in etc/rc.subr and may need to
+# depend on the sysutils/rc_subr port.
+# If this is set to a list of files, these files will be
+# automatically added to ${SUB_FILES}, some %%VAR%%'s will
+# automatically be expanded, they will be installed in
+# ${PREFIX}/etc/rc.d and added to the packing list.
+# USE_RCORDER - List of rc.d startup scripts to be called early in the boot
+# process. This acts exactly like USE_RC_SUBR except that
+# scripts are installed in /etc/rc.d.
+# RC_SUBR - Set to path of rc.subr.
+# Default: ${LOCALBASE}/etc/rc.subr.
+# RC_SUBR_SUFFIX
+# - Contains the suffix of installed rc.subr scripts.
+##
+# USE_APACHE - If set, this port relies on an apache webserver.
+#
+# USE_CDRTOOLS - If set, this port depends on sysutils/cdrtools, unless
+# cdrtools-cjk is present or USE_CDRTOOLS=cjk is set, then
+# it depends on sysutils/cdrtools-cjk.
+#
+# Conflict checking. Use if your port cannot be installed at the same time as
+# another package.
+#
+# CONFLICTS - A list of package name patterns that the port conflicts
+# with, separated by blanks. The names may include shell
+# pattern meta-characters "*", "?", "[", "]", and "!".
+# Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_*
+#
+# Various directory definitions and variables to control them.
+# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
+#
+# X11BASE - Where X11 ports install things.
+# Default: ${LOCALBASE}
+# LOCALBASE - Where non-X11 ports install things.
+# Default: /usr/local
+# LINUXBASE - Where Linux ports install things.
+# Default: /compat/linux
+# PREFIX - Where *this* port installs its files.
+# Default: ${LINUXBASE} if USE_LINUX_PREFIX is set,
+# otherwise ${LOCALBASE}
+#
+# IGNORE_PATH_CHECKS
+# - There are some sanity checks against PREFIX.
+# You can disable these checks with defining
+# this variable, but this is not recommended!
+# Only do this if you really know what you are
+# doing. These sanity checks are the following:
+# - PREFIX has to be an absolute path.
+# - PREFIX can't have a trailing slash.
+#
+# MASTERDIR - Where the port finds patches, package files, etc. Define
+# this is you have two or more ports that share most of the
+# files.
+# Default: ${.CURDIR}
+# PORTSDIR - The root of the ports tree.
+# Default: /usr/ports
+# DISTDIR - Where to search for and store copies of original sources
+# Default: ${PORTSDIR}/distfiles
+# PACKAGES - A top level directory where all packages go (rather than
+# going locally to each port).
+# Default: ${PORTSDIR}/packages
+# WRKDIRPREFIX - The place to root the temporary working directory
+# hierarchy.
+# Default: none
+# WRKDIR - A temporary working directory that gets *clobbered* on clean
+# Default: ${WRKDIRPREFIX}${.CURDIR}/work
+# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
+# unpacks to.
+# Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set,
+# in which case simply ${WRKDIR}
+# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
+# PATCHDIR - A directory containing any additional patches you made
+# to port this software to FreeBSD.
+# Default: ${MASTERDIR}/files
+# SCRIPTDIR - A directory containing any auxiliary scripts
+# Default: ${MASTERDIR}/scripts
+# FILESDIR - A directory containing any miscellaneous additional files.
+# Default: ${MASTERDIR}/files
+# PKGDIR - A directory containing any package creation files.
+# Default: ${MASTERDIR}
+# UID_FILES - A list of files containing information about registered UIDs.
+# Note that files have decreasing priority.
+# GID_FILES - A list of files containing information about registered GIDs.
+# Note that files have decreasing priority.
+#
+# Variables that serve as convenient "aliases" for your *-install targets.
+# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
+#
+# INSTALL_PROGRAM
+# - A command to install binary executables. (By
+# default, also strips them, unless ${STRIP} is
+# overridden to be the empty string).
+# INSTALL_KLD - As INSTALL_PROGRAM, but without the STRIP.
+# INSTALL_SCRIPT
+# - A command to install executable scripts.
+# INSTALL_DATA - A command to install sharable data.
+# INSTALL_MAN - A command to install manpages. May or not compress,
+# depending on the value of MANCOMPRESSED (see below).
+#
+# Boolean to control whether manpages are installed.
+#
+# NO_INSTALL_MANPAGES
+# - If set, this port doesn't want to install any manpages.
+# Default: not set, i.e. manpages are installed by default.
+#
+# Set the following to specify all manpages that your port installs.
+# These manpages will be automatically listed in ${PLIST}. Depending
+# on the setting of NO_MANCOMPRESS, the make rules will compress the
+# manpages for you.
+#
+# MAN<sect> - A list of manpages, categorized by section. For
+# example, if your port has "man/man1/foo.1" and
+# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
+# The available sections chars are "123456789LN".
+# MAN<sect>_<lang>
+# - If your port does not install all man pages for all
+# languages in MANLANG, language specific pages for
+# a language can be specified with this. For example,
+# if the port installs foo.1 in English, Japanese, and
+# German, bar.1 in English only, and baz.3 in German
+# only, set
+# MANLANG= "" de ja
+# MAN1= foo.1
+# MAN1_EN= bar.1
+# MAN3_DE= baz.3
+# MLINKS - A list of <source, target> tuples for creating links
+# for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3"
+# will do an "ln -sf a.1 b.1" and "ln -sf c.3 d.3" in
+# appropriate directories. (Use this even if the port
+# installs its own manpage links so they will show up
+# correctly in ${PLIST}.)
+# MANPREFIX - The directory prefix for ${MAN<sect>} and ${MLINKS}.
+# Default: ${PREFIX}
+# MAN<sect>PREFIX
+# - If manual pages of some sections install in different
+# locations than others, use these.
+# Default: ${MANPREFIX}
+# MANCOMPRESSED - This variable can take values "yes", "no" or
+# "maybe". "yes" means manpages are installed
+# compressed; "no" means they are not; "maybe" means
+# it changes depending on the value of NO_MANCOMPRESS.
+# Default: "yes" if USE_IMAKE is set and NO_INSTALL_MANPAGES
+# is not set, and "no" otherwise.
+#
+# Set the following to specify all .info files your port installs.
+#
+# INFO - A list of .info files (omitting the trailing ".info");
+# only one entry per document! These files are listed in
+# the path relative to ${INFO_PATH}.
+# INFO_PATH - Path, where all .info files will be installed by your
+# port, relative to ${PREFIX}
+# Default: "share/info" if ${PREFIX} is equal to /usr
+# and "info" otherwise.
+#
+# Set the following to specify all documentation your port installs into
+# ${DOCSDIR}
+#
+# PORTDOCS - A list of files and directories relative to DOCSDIR.
+# Shell glob patterns can be used, directories include
+# the entire subtree of contained files and directories.
+# Should not be set when no documentation files are
+# installed (for example because NOPORTDOCS is defined).
+# Useful for dynamically generated documentation.
+#
+# Set the following to specify all documentation your port installs into
+# ${EXAMPLESDIR}
+#
+# PORTEXAMPLES - A list of files and directories relative to EXAMPLESDIR.
+# Shell glob patterns can be used, directories include
+# the entire subtree of contained files and directories.
+# Should not be set when no examples files are
+# installed (for example because NOPORTEXAMPLES is defined).
+# Useful for dynamically generated examples.
+#
+# Set the following to specify all documentation your port installs into
+# ${DATADIR}
+#
+# PORTDATA - A list of files and directories relative to DATADIR.
+# Shell glob patterns can be used, directories include
+# the entire subtree of contained files and directories.
+# Should not be set when no data files are
+# installed (for example because NOPORTDATA is defined).
+# Useful for dynamically generated data files.
+#
+# Default targets and their behaviors:
+#
+# fetch - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
+# port.
+# fetch-list - Show list of commands to retrieve missing ${DISTFILES} and
+# ${PATCHFILES} for this port.
+# fetch-recursive
+# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
+# port and dependencies.
+# fetch-recursive-list
+# - Show list of commands to retrieve missing ${DISTFILES} and
+# ${PATCHFILES} for this port and dependencies.
+# fetch-required
+# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
+# port and dependencies.
+# fetch-required-list
+# - Show list of commands to retrieve missing ${DISTFILES} and
+# ${PATCHFILES} for this port and dependencies.
+# fetch-url-list
+# - Show list of URLS to retrieve missing ${DISTFILES} and
+# ${PATCHFILES} for this port.
+# fetch-urlall-list
+# - Show list of URLS to retrieve ${DISTFILES} and
+# ${PATCHFILES} for this port.
+#
+# all-depends-list
+# - Show all directories which are dependencies
+# for this port.
+# build-depends-list
+# - Show all directories which are build-dependencies
+# for this port.
+# package-depends-list
+# - Show all directories which are package-dependencies
+# for this port. This is based upon the dependency
+# tree as recorded in the Makefiles of the ports
+# collection, not as recorded in the currently
+# installed ports.
+# actual-package-depends
+# - Like package-depends-list but with the difference
+# that the dependencies of the currently installed
+# ports are used instead of the dependencies as
+# recorded in the ports collection.
+# run-depends-list
+# - Show all directories which are run-dependencies
+# for this port.
+#
+# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
+# patch - Apply any provided patches to the source.
+# configure - Runs either GNU configure, one or more local configure
+# scripts or nothing, depending on what's available.
+# build - Actually compile the sources.
+# install - Install the results of a build.
+# reinstall - Install the results of a build, ignoring "already installed"
+# flag.
+# deinstall - Remove the installation.
+# deinstall-all - Remove all installations with the same PKGORIGIN.
+# package - Create a package from an _installed_ port.
+# package-recursive
+# - Create a package for a port and _all_ of its dependancies.
+# describe - Try to generate a one-line description for each port for
+# use in INDEX files and the like.
+# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
+# give incorrect results if multiple patches deal with
+# the same file.
+# checksum - Use distinfo to ensure that your distfiles are valid.
+# checksum-recursive
+# - Run checksum in this port and all dependencies.
+# makesum - Generate distinfo (only do this for your own ports!).
+# clean - Remove ${WRKDIR} and other temporary files used for building.
+# clean-depends - Do a "make clean" for all dependencies.
+# config - Configure options for this port (using ${DIALOG}).
+# Automatically run prior to extract, patch, configure, build,
+# install, and package.
+# config-recursive
+# - Configure options for this port for this port and all
+# dependencies.
+# showconfig - Display options config for this port.
+# showconfig-recursive
+# - Display options config for this port and all dependencies.
+# rmconfig - Remove the options config for this port.
+# rmconfig-recursive
+# - Remove the options config for this port and all dependencies.
+#
+# Default sequence for "all" is:
+#
+# check-sanity fetch checksum extract patch configure build
+#
+# Please read the comments in the targets section below; you
+# should be able to use the pre-* or post-* targets/scripts
+# (which are available for every stage except checksum) or
+# override the do-* targets to do pretty much anything you want.
+#
+# NEVER override the "regular" targets unless you want to open
+# a major can of worms.
+#
+# Set these variables if your port doesn't need some of the steps.
+# Note that there are no NO_PATCH or NO_CONFIGURE variables because
+# those steps are empty by default. NO_EXTRACT is not allowed anymore
+# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user
+# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE.
+#
+# NO_BUILD - Use a dummy (do-nothing) build target.
+# NO_INSTALL - Use a dummy (do-nothing) install target.
+#
+# Here are some variables used in various stages.
+#
+# For options:
+# OPTIONS - List of what WITH_<option> options this port accept. The
+# format is <option> "<description>" [on|off]
+# Example:
+# FLEXRESP "Flexible response to events" off
+# which tell that an option WITH_FLEXRESP exists for this port,
+# that by default it is not defined, and that the description to
+# show to a user in the config dialog is "Flexible response to
+# events". If you have more than one option, just chain them
+# into a single variable. NOTE: To make options work, you need
+# to include bsd.port.pre.mk before you start testing the
+# WITH_xyz variables.
+#
+# For fetch:
+#
+# FETCH_BINARY - Path to ftp/http fetch command if not in $PATH.
+# Default: "/usr/bin/fetch"
+# FETCH_ARGS - Arguments to ftp/http fetch command.
+# Default: "-ApRr"
+# FETCH_CMD - ftp/http fetch command.
+# Default: ${FETCH_BINARY} ${FETCH_ARGS}
+# FETCH_BEFORE_ARGS
+# - Arguments to ${FETCH_CMD} before filename.
+# Default: none
+# FETCH_AFTER_ARGS
+# - Arguments to ${FETCH_CMD} following filename.
+# Default: none
+# FETCH_ENV - Environment to pass to ${FETCH_CMD}.
+# Default: none
+# FETCH_REGET - Times to retry fetching of files on checksum errors.
+# Default: 1
+#
+# For extract:
+#
+# EXTRACT_CMD - Command for extracting archive: "bzip2" if USE_BZIP2
+# is set, "unzip" if USE_ZIP is set, "unmakeself" if
+# USE_MAKESELF if set, "gzip" otherwise.
+# EXTRACT_BEFORE_ARGS
+# - Arguments to ${EXTRACT_CMD} before filename.
+# Default: "-dc"
+# EXTRACT_AFTER_ARGS
+# - Arguments to ${EXTRACT_CMD} following filename.
+# default: "| tar -xf -"
+# EXTRACT_PRESERVE_OWNERSHIP
+# - Normally, when run as "root", the extract stage will
+# change the owner and group of all files under ${WRKDIR}
+# to 0:0. Set this variable if you want to turn off this
+# feature.
+#
+# For makesum:
+#
+# NO_SIZE - Don't record size data in distinfo, needed
+# when the master site does not report file
+# sizes, or when multiple valid versions of
+# a distfile, having different sizes, exist.
+#
+# For patch:
+#
+# EXTRA_PATCHES - Define this variable if you have patches not in
+# ${PATCHDIR}. This usually happens when you need to
+# do some pre-processing before some distribution
+# patches can be applied. In that case, fetch them as
+# extra distfiles, put the processed results in
+# ${WRKDIR}, then point EXTRA_PATCHES to them.
+# The patches specified by this variable will be
+# applied after the normal distribution patches but
+# before those in ${PATCHDIR}.
+# PATCH_WRKSRC - Directory to apply patches in.
+# Default: ${WRKSRC}
+#
+# For configure:
+#
+# HAS_CONFIGURE - If set, this port has its own configure script. The
+# configure stage will not do anything if this is not set.
+# GNU_CONFIGURE - If set, you are using GNU configure (optional). Implies
+# HAS_CONFIGURE.
+# PERL_CONFIGURE
+# - Configure using Perl's MakeMaker. Implies USE_PERL5.
+# CONFIGURE_WRKSRC
+# - Directory to run configure in.
+# Default: ${WRKSRC}
+# CONFIGURE_SCRIPT
+# - Name of configure script, relative to ${CONFIGURE_WRKSRC}.
+# Default: "Makefile.PL" if PERL_CONFIGURE is set,
+# "configure" otherwise.
+# CONFIGURE_TARGET
+# - The name of target to call when GNU_CONFIGURE is
+# defined.
+# Default: ${ARCH}-portbld-freebsd${OSREL}
+# GNU_CONFIGURE_PREFIX
+# - The directory passed as prefix to the configure script if
+# GNU_CONFIGURE is set.
+# Default: ${PREFIX}
+# CONFIGURE_ARGS
+# - Pass these args to configure if ${HAS_CONFIGURE} is set.
+# Default: "--prefix=${GNU_CONFIGURE_PREFIX} --infodir=${PREFIX}/${INFO_PATH}
+# --mandir=${MANPREFIX}/man --build=${CONFIGURE_TARGET}" if
+# GNU_CONFIGURE is set, "CC=${CC} CCFLAGS=${CFLAGS}
+# PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib
+# INSTALLARCHLIB=${PREFIX}/lib" if PERL_CONFIGURE is set,
+# empty otherwise.
+# CONFIGURE_ENV - Pass these env (shell-like) to configure if
+# ${HAS_CONFIGURE} is set.
+# CONFIGURE_LOG - The name of configure log file. It will be printed to
+# the screen if configure fails.
+# Default: config.log
+# CONFIGURE_FAIL_MESSAGE
+# - A message displayed to users when configure
+# fails (note: this assumes the do-configure
+# target has not been overwritten). This message
+# will be passed through /usr/bin/fmt before
+# being shown to the user.
+#
+# For build and install:
+#
+# MAKEFILE - Name of the makefile.
+# Default: Makefile
+# ALL_TARGET - Default target for sub-make in build stage.
+# Default: all
+# BUILD_WRKSRC - Directory to do build in (default: ${WRKSRC}).
+# MAKE_ENV - Additional environment vars passed to sub-make in build
+# and install stages.
+# Default: see below
+# MAKE_ARGS - Any extra arguments to sub-make in build and install stages.
+# Default: none
+##
+# MAKE_JOBS_SAFE
+# - This port can safely be built on multiple cpus in parallel.
+# The make will be invoked with -jX parameter where X equals
+# number of cores present in the system.
+# MAKE_JOBS_UNSAFE
+# - Disallow multiple jobs even when user set a global override.
+# To be used with known bad ports.
+# DISABLE_MAKE_JOBS
+# - Set to disable the multiple jobs feature. User settable.
+# FORCE_MAKE_JOBS
+# - Force all ports to be built with multiple jobs, except ports
+# that are explicitly marked MAKE_JOBS_UNSAFE. User settable.
+# MAKE_JOBS_NUMBER
+# - Override the number of make jobs to be used. User settable.
+#
+# For install:
+#
+# INSTALL_TARGET
+# - Default target for sub-make in install stage.
+# Default: install
+# INSTALL_WRKSRC
+# - Directory to install from
+# Default: ${WRKSRC}
+# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
+# the "install" target.
+# MTREE_FILE - The name of the mtree file.
+# Default: ${PORTSDIR}/Templates/BSD.local.dist or
+# /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr".
+# PLIST_DIRS - Directories to be added to packing list
+# PLIST_FILES - Files and symbolic links to be added to packing list
+#
+# PLIST - Name of the `packing list' file.
+# Change this to ${WRKDIR}/PLIST or something if you
+# need to write to it. (It is not a good idea for a port
+# to write to any file outside ${WRKDIR} during a normal
+# build.)
+# Default: ${PKGDIR}/pkg-plist
+# TMPPLIST - Name of the `packing list' file after processing
+# Default: ${WRKDIR}/.PLIST.mktmp
+# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST}
+# Default: see below
+#
+# SUB_FILES - Files that should be passed through sed and redirected to
+# ${WRKDIR}.
+# - For each file specified in SUB_FILES, there must be a
+# corresponding file in ${FILESDIR} whose suffix is ".in". For
+# instance, if the Makefile specifies "SUB_FILES= pkg-message"
+# then there must be a file called pkg-message.in in
+# ${FILESDIR}.
+# - The substitution process is the same as PLIST_FILES, as
+# described below except that any line beginning with @comment
+# is deleted.
+# SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES}
+# Some pairs are added by default: eg. PREFIX=${PREFIX}
+#
+# INSTALLS_SHLIB
+# - If set, bsd.port.mk will automatically run ldconfig commands
+# from post-install and also add appropriate @exec/@unexec
+# directives to directories listed in LDCONFIG_DIRS. (deprecated)
+# If USE_LINUX_PREFIX is defined, the Linux version of
+# ldconfig will be used instead of the native FreeBSD
+# version, and LDCONFIG_DIRS will be ignored.
+# LDCONFIG_DIRS - List of directories to run ldconfig if INSTALLS_SHLIB is set.
+# Note that this is passed through sed just like the
+# rest of PLIST, so ${PLIST_SUB} substitutions also
+# apply here. It is recommended that you use
+# %%PREFIX%% for ${PREFIX}, %%LOCALBASE%% for
+# ${LOCALBASE} and %%X11BASE%% for ${X11BASE}.
+# Default: %%PREFIX%%/lib
+# USE_LDCONFIG - If set to "yes", this subsumes the function of the
+# deprecated variable INSTALLS_SHLIB and adds ${PREFIX}/lib
+# to the list of directories to be searched for shared
+# libraries. Otherwise, this is a list of directories to
+# be added to that list. The directory names are written to
+# ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then
+# used by the ldconfig startup script.
+# This mechanism replaces ldconfig scripts installed by some
+# ports, often under such names as 000.${UNQUENAME}.sh.
+# If USE_LINUX_PREFIX is defined, the Linux version of
+# ldconfig will be used instead of the native FreeBSD
+# version, and the directory list given will be ignored.
+# USE_LDCONFIG32
+# - Same as USE_LDCONFIG but the target file is
+# ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead.
+# Note: that should only be used on 64-bit architectures.
+# NO_LDCONFIG_MTREE
+# - Denotes whether the libdata/ldconfig directory is part of
+# the mtree on a given OSVERSION system. If it is not, we
+# create the directory, pull in the ldconfig_compat port,
+# and clean up on de-installation. NOTE: this variable is
+# internal to bsd.port.mk and must not be set in your Makefile.
+#
+# DOCSDIR - Name of the directory to install the packages docs in.
+# Default: ${PREFIX}/share/doc/${PORTNAME}
+# DOCSDIR_REL - The DOCSDIR relative to ${PREFIX}
+# EXAMPLESDIR - Name of the directory to install the packages examples in.
+# Default: ${PREFIX}/share/examples/${PORTNAME}
+# EXAMPLESDIR_REL
+# - The EXAMPLESDIR relative to ${PREFIX}
+# DATADIR - Name of the directory to install the packages shared data in.
+# Default: ${PREFIX}/share/${PORTNAME}
+# DATADIR_REL - The DATADIR relative to ${PREFIX}
+#
+# WWWDIR - Name of the directory to install the packages www data in.
+# Default: ${PREFIX}/www/${PORTNAME}
+# WWWDIR_REL - The WWWDIR relative to ${PREFIX}
+#
+# USERS - List of users to create at install time. Each login must
+# have a corresponding entry in ${UID_FILES}.
+# GROUPS - List of groups to create at install time. Each group must
+# have a corresponding entry in ${GID_FILES}.
+#
+# DESKTOPDIR - Name of the directory to install ${DESKTOP_ENTRIES} in.
+# Default: ${PREFIX}/share/applications
+# DESKTOP_ENTRIES
+# - List of desktop entry files to generate and install in
+# ${DESKTOPDIR}. The format is
+# "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify
+# Rules:
+# * Only add desktop entries for applications which do not
+# require a terminal (ie. X applications).
+# * If the upstream distribution already installs .desktop
+# files, you do not need to use this.
+# * If you require a more elaborate .desktop file than this
+# variable permits, write it yourself and install it
+# in ${DESKTOPDIR}.
+# Notes:
+# * Comment and Icon may be empty strings (""). Categories
+# may be an empty string in some cases (see below). The
+# other fields are mandatory.
+# * If Categories is an empty string, bsd.port.mk will try
+# to deduce a default value using the CATEGORIES variable.
+# If the deduction fails, you will have to set Categories
+# manually. You should check the generated value using
+# "make desktop-categories", and override it if necessary.
+# * Exec will also be used to name the .desktop file.
+# * The files will be automatically added to ${PLIST}.
+# Example:
+# "X Window Information" \
+# "Get information about X windows" \
+# "wininfo.png" \
+# "wininfo" \
+# "Application;System;" \
+# true
+# See http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html
+# for an explanation of the fields. If you need to create more
+# than one file, just chain them into a single variable.
+#
+# Note that the install target will automatically add manpages (see
+# above) and also substitute special sequences of characters (delimited
+# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For
+# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
+# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
+# ${TMPPLIST} is generated before the do-install stage. If you are
+# generating the packing list on-the-fly, make sure it's generated before
+# do-install is called!
+#
+# For package:
+#
+# NO_LATEST_LINK
+# - Do not install the "Latest" link for package. Define this
+# if this port is a beta version of another stable port
+# which is also in the tree.
+# LATEST_LINK - Install the "Latest" link for the package as ___. Define
+# this if the "Latest" link name will be incorrectly determined.
+#
+# This is used in all stages:
+#
+# SCRIPTS_ENV - Additional environment vars passed to scripts in
+# ${SCRIPTDIR} executed by bsd.port.mk.
+# Default: see below
+#
+# Finally, variables to change if you want a special behavior. These
+# are for debugging purposes. Don't set them in your Makefile.
+#
+# ECHO_MSG - Used to print all the '===>' style prompts - override this
+# to turn them off.
+# Default: ${ECHO_CMD}
+# PATCH_DEBUG - If set, print out more information about the patches as
+# it attempts to apply them.
+# PKG_DBDIR - Where package installation is recorded; this directory
+# must not contain anything else.
+# Default: /var/db/pkg
+# PORT_DBDIR - Where port configuration options are recorded.
+# Default: /var/db/ports
+# NO_PKG_REGISTER
+# - Don't register a port installation as a package.
+# FORCE_PKG_REGISTER
+# - If set, it will overwrite any existing package
+# registration information in ${PKG_DBDIR}/${PKGNAME}.
+# NO_DEPENDS - Don't verify build of dependencies.
+# CHECKSUM_ALGORITHMS
+# - Different checksum algorithms to check for verifying the
+# integrity of the distfiles. The absence of the algorithm
+# in distinfo doesn't make it fail.
+# Default: md5 sha256
+# NO_CHECKSUM - Don't verify the checksum. Typically used when
+# when you noticed the distfile you just fetched has
+# a different checksum and you intend to verify if
+# the port still works with it.
+# USE_PACKAGE_DEPENDS
+# - Install dependencies from existing packages instead
+# of building the port from scratch.
+# INSTALL_AS_USER
+# - Define this to install as the current user, intended
+# for systems where you have no root access.
+# DISABLE_SIZE - Do not check the size of a distfile even if the SIZE field
+# has been specified in distinfo. This is useful
+# when using an alternate FETCH_CMD.
+#
+# End of the list of all variables that need to be defined in a port.
+# Most port authors should not need to understand anything after this point.
+#
+
+# These need to be absolute since we don't know how deep in the ports
+# tree we are and thus can't go relative. They can, of course, be overridden
+# by individual Makefiles or local system make configuration.
+PORTSDIR?= /usr/ports
+LOCALBASE?= /usr/local
+X11BASE?= ${LOCALBASE}
+LINUXBASE?= /compat/linux
+DISTDIR?= ${PORTSDIR}/distfiles
+_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
+INDEXDIR?= ${PORTSDIR}
+
+.include "${PORTSDIR}/Mk/bsd.commands.mk"
+
+#
+# DESTDIR section to start a chrooted process if invoked with DESTDIR set
+#
+
+.if defined(DESTDIR) && !empty(DESTDIR) && !defined(CHROOTED) && \
+ !defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
+
+.include "${PORTSDIR}/Mk/bsd.destdir.mk"
+
+.else
+
+# Look for ${PATCH_WRKSRC}/.../*.orig files, and (re-)create
+# ${FILEDIR}/patch-* files from them.
+
+.if !target(makepatch)
+makepatch:
+ @cd ${.CURDIR} && ${MKDIR} ${FILESDIR}
+ @(cd ${PATCH_WRKSRC}; \
+ for i in `find . -type f -name '*.orig'`; do \
+ ORG=$$i; \
+ NEW=$${i%.orig}; \
+ OUT=${FILESDIR}`${ECHO} $${NEW} | \
+ ${SED} -e 's|/|__|g' \
+ -e 's|^\.__|/patch-|'`; \
+ ${ECHO} ${DIFF} -ud $${ORG} $${NEW} '>' $${OUT}; \
+ ${DIFF} -ud $${ORG} $${NEW} > $${OUT} || ${TRUE}; \
+ done \
+ )
+.endif
+
+
+# Start of options section
+.if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) )
+
+.if defined(MAKE_VERSION)
+.if ${MAKE_VERSION} >= 5200408030 || ${MAKE_VERSION} >= 4200408030 && ${MAKE_VERSION} < 5000000000
+NOPRECIOUSSOFTMAKEVARS= yes
+.endif
+.endif
+
+# Get the default maintainer
+MAINTAINER?= ports at FreeBSD.org
+
+# Get the architecture
+.if !defined(ARCH)
+ARCH!= ${UNAME} -p
+.endif
+
+# Kludge for pre-3.0 systems
+MACHINE_ARCH?= i386
+
+# Get the operating system type
+.if !defined(OPSYS)
+OPSYS!= ${UNAME} -s
+.endif
+
+# Get the operating system revision
+.if !defined(OSREL)
+OSREL!= ${UNAME} -r | ${SED} -e 's/[-(].*//'
+.endif
+
+# Get __FreeBSD_version
+.if !defined(OSVERSION)
+.if exists(/usr/include/sys/param.h)
+OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h
+.elif exists(/usr/src/sys/sys/param.h)
+OSVERSION!= ${AWK} '/^\#define[[:blank::]]__FreeBSD_version/ {print $$3}' < /usr/src/sys/sys/param.h
+.else
+OSVERSION!= ${SYSCTL} -n kern.osreldate
+.endif
+.endif
+
+MASTERDIR?= ${.CURDIR}
+
+.if ${MASTERDIR} != ${.CURDIR}
+SLAVE_PORT?= yes
+MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/}
+.else
+SLAVE_PORT?= no
+MASTER_PORT?=
+.endif
+
+# If they exist, include Makefile.inc, then architecture/operating
+# system specific Makefiles, then local Makefile.local.
+
+.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+USE_SUBMAKE= yes
+.endif
+
+.if exists(${MASTERDIR}/../Makefile.inc)
+.include "${MASTERDIR}/../Makefile.inc"
+USE_SUBMAKE= yes
+.endif
+
+.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS})
+.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}"
+USE_SUBMAKE= yes
+.elif exists(${MASTERDIR}/Makefile.${OPSYS})
+.include "${MASTERDIR}/Makefile.${OPSYS}"
+USE_SUBMAKE= yes
+.elif exists(${MASTERDIR}/Makefile.${ARCH})
+.include "${MASTERDIR}/Makefile.${ARCH}"
+USE_SUBMAKE= yes
+.endif
+
+.if exists(${MASTERDIR}/Makefile.local)
+.include "${MASTERDIR}/Makefile.local"
+USE_SUBMAKE= yes
+.endif
+
+# where 'make config' records user configuration options
+PORT_DBDIR?= /var/db/ports
+
+UID_FILES?= ${PORTSDIR}/UIDs
+GID_FILES?= ${PORTSDIR}/GIDs
+UID_OFFSET?= 0
+GID_OFFSET?= 0
+
+LDCONFIG_DIR= libdata/ldconfig
+LDCONFIG32_DIR= libdata/ldconfig32
+
+.if defined(LATEST_LINK)
+UNIQUENAME?= ${LATEST_LINK}
+.else
+UNIQUENAME?= ${PKGNAMEPREFIX}${PORTNAME}
+.endif
+OPTIONSFILE?= ${PORT_DBDIR}/${UNIQUENAME}/options
+.if defined(OPTIONS)
+# include OPTIONSFILE first if exists
+. if exists(${OPTIONSFILE}) && !make(rmconfig)
+. include "${OPTIONSFILE}"
+. endif
+. if exists(${OPTIONSFILE}.local)
+. include "${OPTIONSFILE}.local"
+. endif
+WITHOUT:=
+WITH:=
+. if defined(OPTIONS)
+REALOPTIONS=${OPTIONS:C/".*"//g}
+. for O in ${REALOPTIONS}
+RO:=${O}
+. if ${RO:L} == off
+WITHOUT:= ${WITHOUT} ${OPT}
+. endif
+. if ${RO:L} == on
+WITH:= ${WITH} ${OPT}
+. endif
+OPT:=${RO}
+. endfor
+. endif
+# define only if NO WITH/WITHOUT_${W} is defined
+. for W in ${WITH}
+. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
+WITH_${W}:= true
+. endif
+. endfor
+. for W in ${WITHOUT}
+. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
+WITHOUT_${W}:= true
+. endif
+. endfor
+. undef WITH
+. undef WITHOUT
+. undef RO
+. undef REALOPTIONS
+.endif
+
+.endif
+
+DOS2UNIX_REGEX?= .*
+
+# At least KDE needs TMPDIR for the package building,
+# so we're setting it to the known default value.
+.if defined(PACKAGE_BUILDING)
+TMPDIR?= /tmp
+.endif # defined(PACKAGE_BUILDING)
+
+# Respect TMPDIR passed via make.conf or similar and pass it down
+# to configure and make.
+.if defined(TMPDIR)
+MAKE_ENV+= TMPDIR="${TMPDIR}"
+CONFIGURE_ENV+= TMPDIR="${TMPDIR}"
+.endif # defined(TMPDIR)
+
+
+# Start of pre-makefile section.
+.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK)
+
+.if defined(_PREMKINCLUDED)
+check-makefile::
+ @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.pre].mk twice"
+ @${FALSE}
+.endif
+
+_PREMKINCLUDED= yes
+
+.if defined(PORTVERSION)
+.if ${PORTVERSION:M*[-_,]*}x != x
+IGNORE= PORTVERSION ${PORTVERSION} may not contain '-' '_' or ','
+.endif
+DISTVERSION?= ${PORTVERSION:S/:/::/g}
+.elif defined(DISTVERSION)
+PORTVERSION= ${DISTVERSION:L:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g}
+.endif
+
+PORTREVISION?= 0
+.if ${PORTREVISION} != 0
+_SUF1= _${PORTREVISION}
+.endif
+
+PORTEPOCH?= 0
+.if ${PORTEPOCH} != 0
+_SUF2= ,${PORTEPOCH}
+.endif
+
+PKGVERSION= ${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2}
+PKGNAME= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION}
+DISTNAME?= ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION:C/:(.)/\1/g}${DISTVERSIONSUFFIX}
+
+INDEXFILE?= INDEX-${OSVERSION:C/([0-9]).*/\1/}
+
+DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME}
+EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME}
+DATADIR?= ${PREFIX}/share/${PORTNAME}
+WWWDIR?= ${PREFIX}/www/${PORTNAME}
+ETCDIR?= ${PREFIX}/etc/${PORTNAME}
+
+.if defined(USE_LINUX_RPM)
+.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
+.endif
+
+.if defined(USE_LINUX_APPS)
+.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
+.endif
+
+.if defined(X_WINDOW_SYSTEM) && ${X_WINDOW_SYSTEM:L} != "xorg"
+IGNORE= cannot be installed: bad X_WINDOW_SYSTEM setting; valid value is 'xorg'
+.endif
+
+.if ${X11BASE} != ${LOCALBASE}
+.BEGIN:
+ @${ECHO_MSG} "X11BASE is now deprecated. Unset X11BASE in make.conf and try again."
+ @${FALSE}
+.endif
+
+.if defined(USE_XORG) || defined(XORG_CAT)
+.include "${PORTSDIR}/Mk/bsd.xorg.mk"
+.endif
+
+.if defined(USE_BZIP2)
+EXTRACT_SUFX?= .tar.bz2
+.elif defined(USE_ZIP)
+EXTRACT_SUFX?= .zip
+.elif defined(USE_MAKESELF)
+EXTRACT_SUFX?= .run
+.else
+EXTRACT_SUFX?= .tar.gz
+.endif
+PACKAGES?= ${PORTSDIR}/packages
+TEMPLATES?= ${PORTSDIR}/Templates
+
+PATCHDIR?= ${MASTERDIR}/files
+FILESDIR?= ${MASTERDIR}/files
+SCRIPTDIR?= ${MASTERDIR}/scripts
+PKGDIR?= ${MASTERDIR}
+
+.if defined(USE_LINUX_PREFIX)
+PREFIX?= ${LINUXBASE}
+NO_MTREE= yes
+.else
+PREFIX?= ${LOCALBASE}
+.endif
+
+.if defined(USE_LINUX_PREFIX)
+LDCONFIG_CMD?= ${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE}
+LDCONFIG_PLIST_EXEC_CMD?= ${LDCONFIG_CMD}
+LDCONFIG_PLIST_UNEXEC_CMD?= ${LDCONFIG_CMD}
+.else
+LDCONFIG_CMD?= ${LDCONFIG} -m ${LDCONFIG_RUNLIST}
+LDCONFIG_PLIST_EXEC_CMD?= ${LDCONFIG} -m ${LDCONFIG_PLIST}
+LDCONFIG_PLIST_UNEXEC_CMD?= ${LDCONFIG} -R
+.endif
+
+PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg
+
+# XXX to remain undefined until all ports that require Perl are fixed
+# to set one of the conditionals that force the inclusion of bsd.perl.mk
+.if !defined(_PERL_REFACTORING_COMPLETE)
+
+PERL_VERSION?= 5.10.1
+
+.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
+perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|}
+_perl_minor= 00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
+perl_minor= ${_perl_minor:C|^.*(...)|\1|}
+.if ${perl_minor} >= 100
+perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
+perl_patch= ${PERL_VERSION:C|^.*(..)|\1|}
+.else # ${perl_minor} < 100
+_perl_patch= 0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
+perl_patch= ${_perl_patch:C|^.*(..)|\1|}
+.endif # ${perl_minor} < 100
+PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch}
+.else
+PERL_LEVEL=0
+.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
+
+PERL_ARCH?= mach
+
+.if ${PERL_LEVEL} >= 501000
+PERL_PORT?= perl5.10
+.else
+PERL_PORT?= perl5.8
+.endif
+
+SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VERSION}
+SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL}
+
+PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
+PERL= ${LOCALBASE}/bin/perl
+
+.endif # !defined(_PERL_REFACTORING_COMPLETE)
+
+.if defined(USE_LOCAL_MK)
+.include "${PORTSDIR}/Mk/bsd.local.mk"
+.endif
+
+.if defined(USE_OPENSSL)
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
+.endif
+
+.if defined(USE_EMACS)
+.include "${PORTSDIR}/Mk/bsd.emacs.mk"
+.endif
+
+.if defined(USE_GNUSTEP)
+.include "${PORTSDIR}/Mk/bsd.gnustep.mk"
+.endif
+
+#.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD)
+.include "${PORTSDIR}/Mk/bsd.perl.mk"
+#.endif
+
+.if defined(USE_PHP)
+.include "${PORTSDIR}/Mk/bsd.php.mk"
+.endif
+
+.if defined(USE_PYTHON) || defined(USE_PYTHON_BUILD) || defined(USE_PYTHON_RUN)
+.include "${PORTSDIR}/Mk/bsd.python.mk"
+.endif
+
+.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
+.include "${PORTSDIR}/Mk/bsd.efl.mk"
+.endif
+
+.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
+.include "${PORTSDIR}/Mk/bsd.fpc.mk"
+.endif
+
+.if defined(USE_JAVA)
+.include "${PORTSDIR}/Mk/bsd.java.mk"
+.endif
+
+.if defined(USE_RUBY) || defined(USE_LIBRUBY)
+.include "${PORTSDIR}/Mk/bsd.ruby.mk"
+.endif
+
+.if defined(USE_OCAML)
+.include "${PORTSDIR}/Mk/bsd.ocaml.mk"
+.endif
+
+.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TCL_RUN) || defined(USE_TCL_WRAPPER) || defined(USE_TK) || defined(USE_TK_BUILD) || defined(USE_TK_RUN) || defined(USE_TK_WRAPPER)
+.include "${PORTSDIR}/Mk/bsd.tcl.mk"
+.endif
+
+.if defined(USE_APACHE) || defined(APACHE_COMPAT)
+.include "${PORTSDIR}/Mk/bsd.apache.mk"
+.endif
+
+.if (defined(USE_QT_VER) && ${USE_QT_VER:L} == 3) || defined(USE_KDELIBS_VER) || defined(USE_KDEBASE_VER)
+.include "${PORTSDIR}/Mk/bsd.kde.mk"
+.endif
+
+.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4
+.include "${PORTSDIR}/Mk/bsd.qt.mk"
+.endif
+
+.if defined(WANT_GECKO) || defined(USE_GECKO)
+.include "${PORTSDIR}/Mk/bsd.gecko.mk"
+.endif
+
+.if defined(WANT_GNOME) || defined(USE_GNOME)
+.include "${PORTSDIR}/Mk/bsd.gnome.mk"
+.endif
+
+.if defined(WANT_LUA) || defined(USE_LUA) || defined(USE_LUA_NOT)
+.include "${PORTSDIR}/Mk/bsd.lua.mk"
+.endif
+
+.if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT)
+.include "${PORTSDIR}/Mk/bsd.wx.mk"
+.endif
+
+.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80)
+.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
+.endif
+
+.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined(USE_QMAIL_BUILD) || defined(WANT_QMAIL)
+.include "${PORTSDIR}/Mk/bsd.mail.mk"
+.endif
+
+.if defined(USE_SDL) || defined(WANT_SDL)
+.include "${PORTSDIR}/Mk/bsd.sdl.mk"
+.endif
+
+.if defined(USE_XFCE)
+.include "${PORTSDIR}/Mk/bsd.xfce.mk"
+.endif
+
+.if defined(USE_KDE4) || defined(KDE4_BUILDENV)
+.include "${PORTSDIR}/Mk/bsd.kde4.mk"
+.endif
+
+# You can force skipping these test by defining IGNORE_PATH_CHECKS
+.if !defined(IGNORE_PATH_CHECKS)
+.if (${PREFIX:C,(^.).*,\1,} != "/")
+.BEGIN:
+ @${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'"
+ @${ECHO_MSG} "is invoked in the work area PREFIX points to the right place."
+ @${FALSE}
+.endif
+.endif
+
+# Location of mounted CDROM(s) to search for files
+CD_MOUNTPTS?= /cdrom ${CD_MOUNTPT}
+
+# Owner and group of the WWW user
+WWWOWN?= www
+WWWGRP?= www
+
+.endif
+# End of pre-makefile section.
+
+# Start of post-makefile section.
+.if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
+
+.if defined(_POSTMKINCLUDED)
+check-makefile::
+ @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice"
+ @${FALSE}
+.endif
+
+_POSTMKINCLUDED= yes
+
+WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work
+.if defined(NO_WRKSUBDIR)
+WRKSRC?= ${WRKDIR}
+.else
+WRKSRC?= ${WRKDIR}/${DISTNAME}
+.endif
+
+PATCH_WRKSRC?= ${WRKSRC}
+CONFIGURE_WRKSRC?= ${WRKSRC}
+BUILD_WRKSRC?= ${WRKSRC}
+INSTALL_WRKSRC?=${WRKSRC}
+
+PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
+SUB_LIST+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} \
+ DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR} \
+ WWWDIR=${WWWDIR} ETCDIR=${ETCDIR}
+
+PLIST_REINPLACE+= dirrmtry stopdaemon rmtry
+PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir %D/\1 2>/dev/null || true!
+PLIST_REINPLACE_RMTRY=s!^@rmtry \(.*\)!@unexec rm -f %D/\1 2>/dev/null || true!
+PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1${RC_SUBR_SUFFIX} forcestop 2>/dev/null || true!
+
+# kludge to strip trailing whitespace from CFLAGS;
+# sub-configure will not # survive double space
+CFLAGS:= ${CFLAGS:C/ $//}
+
+.if defined(WITHOUT_CPU_CFLAGS)
+.if defined(_CPUCFLAGS)
+.if !empty(_CPUCFLAGS)
+CFLAGS:= ${CFLAGS:C/${_CPUCFLAGS}//}
+.endif
+.endif
+.endif
+
+.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
+STRIP= #none
+STRIP_CMD= ${TRUE}
+DEBUG_FLAGS?= -g
+CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS}
+.endif
+
+.if defined(NOPORTDOCS)
+PLIST_SUB+= PORTDOCS="@comment "
+.else
+PLIST_SUB+= PORTDOCS=""
+.endif
+
+.if defined(NOPORTEXAMPLES)
+PLIST_SUB+= PORTEXAMPLES="@comment "
+.else
+PLIST_SUB+= PORTEXAMPLES=""
+.endif
+
+.if defined(NOPORTDATA)
+PLIST_SUB+= PORTDATA="@comment "
+.else
+PLIST_SUB+= PORTDATA=""
+.endif
+
+CONFIGURE_SHELL?= ${SH}
+MAKE_SHELL?= ${SH}
+
+CONFIGURE_ENV+= SHELL=${SH} CONFIG_SHELL=${SH}
+MAKE_ENV+= SHELL=${SH} NO_LINT=YES
+
+.if defined(MANCOMPRESSED)
+.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
+ ${MANCOMPRESSED} != maybe
+check-makevars::
+ @${ECHO_MSG} "${PKGNAME}: Makefile error: value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"".
+ @${FALSE}
+.endif
+.endif
+
+.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
+MANCOMPRESSED?= yes
+.else
+MANCOMPRESSED?= no
+.endif
+
+.if defined(PATCHFILES)
+.if ${PATCHFILES:M*.zip}x != x
+PATCH_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
+.endif
+.endif
+
+# Check the compatibility layer for amd64/ia64
+
+.if ${ARCH} == "amd64" || ${ARCH} =="ia64"
+.if exists(/usr/lib32)
+HAVE_COMPAT_IA32_LIBS?= YES
+.endif
+.if !defined(HAVE_COMPAT_IA32_KERN)
+HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi
+.endif
+.endif
+
+.if defined(IA32_BINARY_PORT) && ${ARCH} != "i386"
+.if ${ARCH} == "amd64" || ${ARCH} == "ia64"
+.if !defined(HAVE_COMPAT_IA32_KERN)
+IGNORE= requires a kernel with compiled-in IA32 compatibility
+.elif !defined(HAVE_COMPAT_IA32_LIBS)
+IGNORE= requires 32-bit libraries installed under /usr/lib32
+.endif
+_LDCONFIG_FLAGS=-32
+LIB32DIR= lib32
+.else
+IGNORE= requires i386 (or compatible) platform to run
+.endif
+.else
+LIB32DIR= lib
+.endif
+PLIST_SUB+= LIB32DIR=${LIB32DIR}
+
+.if defined(USE_ZIP)
+EXTRACT_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
+.endif
+.if defined(USE_MAKESELF)
+EXTRACT_DEPENDS+= unmakeself:${PORTSDIR}/archivers/unmakeself
+.endif
+.if defined(USE_GMAKE)
+BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
+CONFIGURE_ENV+= MAKE=${GMAKE}
+.endif
+
+.if defined(USE_GCC) || defined(USE_FORTRAN)
+.include "${PORTSDIR}/Mk/bsd.gcc.mk"
+.endif
+
+.if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER)
+.include "${PORTSDIR}/Mk/bsd.ldap.mk"
+.endif
+
+.if defined(USE_OPENAL)
+_OPENAL_ALL= al si soft alut
+_OPENAL_LIBS= si soft
+# Default choie.
+_DEFAULT_OPENAL= soft
+
+_OPENAL_SOFT= openal.1:${PORTSDIR}/audio/openal-soft
+_OPENAL_SI= openal.0:${PORTSDIR}/audio/openal
+_OPENAL_ALUT= alut.1:${PORTSDIR}/audio/freealut
+
+.if exists(${LOCALBASE}/lib/libopenal.a)
+_HAVE_OPENAL= si
+.elif exists(${LOCALBASE}/bin/openal-info)
+_HAVE_OPENAL= soft
+.endif
+
+.if ${USE_OPENAL} == "yes"
+# Be friendly.
+USE_OPENAL= ${_DEFAULT_OPENAL}
+.endif
+
+__USED_OPENAL=
+_USE_OPENAL=
+.for component in ${USE_OPENAL}
+.if ${__USED_OPENAL:M${component}} == ""
+__USED_OPENAL+= ${component}
+
+.if ${_OPENAL_ALL:M${component}} == ""
+BROKEN= OPENAL mismatch: unknown component ${component}
+.elif ${_OPENAL_ALL:M${component}} == "al"
+
+# Check if the user wish matches the found OpenAL system.
+.if defined(WANT_OPENAL) && defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${WANT_OPENAL}
+BROKEN= OPENAL mismatch: ${_HAVE_OPENAL} is installed, but ${WANT_OPENAL} desired
+.endif # WANT_OPENAL
+
+.if defined(_HAVE_OPENAL)
+_OPENAL_SYSTEM= ${_HAVE_OPENAL}
+.elif defined(WANT_OPENAL)
+_OPENAL_SYSTEM= ${WANT_OPENAL}
+.else
+_OPENAL_SYSTEM= ${_DEFAULT_OPENAL}
+.endif # _HAVE_OPENAL
+
+_USE_OPENAL+= ${_OPENAL_${_OPENAL_SYSTEM:U}}
+
+.else # ${_OPENAL_ALL:M${component}} == ""
+
+.if ${_OPENAL_LIBS:M${component}} == ${component}
+# Check for the system implementation to use.
+.if defined(WANT_OPENAL) && ${WANT_OPENAL} != ${component}
+BROKEN= OPENAL mismatch: wants to use ${component}, while you wish to use ${WANT_OPENAL}
+.endif
+.if defined(_OPENAL_SYSTEM)
+BROKEN= OPENAL mismatch: cannot use ${component} and al together.
+.endif
+.if defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${component}
+BROKEN= OPENAL mismatch: wants to use ${component}, but ${_HAVE_OPENAL} is installed
+.endif
+
+_OPENAL_SYSTEM= ${component}
+
+.endif # ${_OPENAL_LIBS:M${component}} == ${component}
+
+_USE_OPENAL+= ${_OPENAL_${component:U}}
+
+.endif # ${_OPENAL_ALL:M${component}} == ""
+
+.endif # ${__USED_OPENAL:M${component} == ""
+.endfor # component in ${USE_OPENAL}
+
+.for dep in ${_USE_OPENAL}
+LIB_DEPENDS+= ${dep}
+.endfor
+
+.endif # USE_OPENAL
+
+.if defined(USE_FAM)
+DEFAULT_FAM_SYSTEM= gamin
+# Currently supported FAM systems
+FAM_SYSTEM_FAM= fam.0:${PORTSDIR}/devel/fam
+FAM_SYSTEM_GAMIN= fam.0:${PORTSDIR}/devel/gamin
+
+.if exists(${LOCALBASE}/libexec/gam_server)
+_HAVE_FAM_SYSTEM= gamin
+.elif exists(${LOCALBASE}/bin/fam)
+_HAVE_FAM_SYSTEM= fam
+.endif
+
+.if defined(WANT_FAM_SYSTEM)
+.if defined(WITH_FAM_SYSTEM) && ${WITH_FAM_SYSTEM}!=${WANT_FAM_SYSTEM}
+IGNORE= wants to use ${WANT_FAM_SYSTEM} as its FAM system, while you wish to use ${WITH_FAM_SYSTEM}
+.endif
+FAM_SYSTEM= ${WANT_FAM_SYSTEM}
+.elif defined(WITH_FAM_SYSTEM)
+FAM_SYSTEM= ${WITH_FAM_SYSTEM}
+.else
+.if defined(_HAVE_FAM_SYSTEM)
+FAM_SYSTEM= ${_HAVE_FAM_SYSTEM}
+.else
+FAM_SYSTEM= ${DEFAULT_FAM_SYSTEM}
+.endif
+.endif # WANT_FAM_SYSTEM
+
+.if defined(_HAVE_FAM_SYSTEM)
+.if ${_HAVE_FAM_SYSTEM}!= ${FAM_SYSTEM}
+BROKEN= FAM system mismatch: ${_HAVE_FAM_SYSTEM} is installed, while desired FAM system is ${FAM_SYSTEM}
+.endif
+.endif
+
+.if defined(FAM_SYSTEM_${FAM_SYSTEM:U})
+LIB_DEPENDS+= ${FAM_SYSTEM_${FAM_SYSTEM:U}}
+.else
+IGNORE= cannot be built with unknown FAM system: ${FAM_SYSTEM}
+.endif
+.endif # USE_FAM
+
+.if defined(USE_RC_SUBR) || defined(USE_RCORDER)
+RC_SUBR= /etc/rc.subr
+SUB_LIST+= RC_SUBR=${RC_SUBR}
+.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
+SUB_FILES+= ${USE_RC_SUBR}
+.endif
+.if defined(USE_RCORDER)
+SUB_FILES+= ${USE_RCORDER}
+.endif
+.if (${OSVERSION} >= 700007 || ${OSVERSION} < 700000)
+RC_SUBR_SUFFIX?=
+.else
+RC_SUBR_SUFFIX?= .sh
+.endif
+.endif
+
+.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes"
+USE_LDCONFIG= ${PREFIX}/lib
+.endif
+.if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:L} == "yes"
+IGNORE= has USE_LDCONFIG32 set to yes, which is not correct
+.endif
+
+.if defined(USE_ICONV)
+LIB_DEPENDS+= iconv.3:${PORTSDIR}/converters/libiconv
+.endif
+
+.if defined(USE_GETTEXT)
+. if ${USE_GETTEXT:L} == "yes"
+LIB_DEPENDS+= intl:${PORTSDIR}/devel/gettext
+. else
+LIB_DEPENDS+= intl.${USE_GETTEXT}:${PORTSDIR}/devel/gettext
+. endif
+.endif
+
+.if defined(USE_LINUX_PREFIX) && (defined(INSTALLS_SHLIB) || defined(USE_LDCONFIG))
+# we need ${LINUXBASE}/sbin/ldconfig
+USE_LINUX?= yes
+.endif
+
+.if defined(USE_LINUX)
+
+. if !defined(LINUX_OSRELEASE)
+LINUX_OSRELEASE!= ${ECHO_CMD} `${SYSCTL} -n compat.linux.osrelease 2>/dev/null`
+. endif
+
+# install(1) also does a brandelf on strip, so don't strip with FreeBSD tools.
+STRIP=
+. if exists(${LINUXBASE}/usr/bin/strip)
+STRIP_CMD= ${LINUXBASE}/usr/bin/strip
+. else
+STRIP_CMD= ${TRUE}
+. endif
+
+# Allow the user to specify another linux_base version.
+. if defined(OVERRIDE_LINUX_BASE_PORT)
+. if ${USE_LINUX:L} == yes
+USE_LINUX= ${OVERRIDE_LINUX_BASE_PORT}
+. endif
+. endif
+
+# NOTE: when you update the default linux_base version (case "yes"),
+# don't forget to update the Handbook!
+
+. if exists(${PORTSDIR}/emulators/linux_base-${USE_LINUX})
+LINUX_BASE_PORT= ${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX}
+. else
+. if ${USE_LINUX:L} == "yes"
+. if ${OSVERSION} < 800076
+LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-fc4
+. else
+LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-f10
+. endif
+. else
+IGNORE= cannot be built: there is no emulators/linux_base-${USE_LINUX}, perhaps wrong use of USE_LINUX or OVERRIDE_LINUX_BASE_PORT
+. endif
+. endif
+
+RUN_DEPENDS+= ${LINUX_BASE_PORT}
+.endif
+
+.if defined(USE_MOTIF)
+USE_XORG+= xpm
+.if defined(WANT_LESSTIF)
+LIB_DEPENDS+= Xm:${PORTSDIR}/x11-toolkits/lesstif
+NO_OPENMOTIF= yes
+.endif
+.if !defined(NO_OPENMOTIF)
+LIB_DEPENDS+= Xm.3:${PORTSDIR}/x11-toolkits/open-motif
+.endif
+.endif
+
+.if defined(USE_FREETYPE)
+LIB_DEPENDS+= ttf.4:${PORTSDIR}/print/freetype
+.endif
+
+X_IMAKE_PORT= ${PORTSDIR}/devel/imake
+X_LIBRARIES_PORT= ${PORTSDIR}/x11/xorg-libraries
+X_CLIENTS_PORT= ${PORTSDIR}/x11/xorg-apps
+X_SERVER_PORT= ${PORTSDIR}/x11-servers/xorg-server
+X_FONTSERVER_PORT= ${PORTSDIR}/x11-fonts/xfs
+X_PRINTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-printserver
+X_VFBSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-vfbserver
+X_NESTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-nestserver
+X_FONTS_ENCODINGS_PORT= ${PORTSDIR}/x11-fonts/encodings
+X_FONTS_MISC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-miscbitmaps
+X_FONTS_100DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-100dpi
+X_FONTS_75DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-75dpi
+X_FONTS_CYRILLIC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-cyrillic
+X_FONTS_TTF_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-truetype
+X_FONTS_TYPE1_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-type1
+X_FONTS_ALIAS_PORT= ${PORTSDIR}/x11-fonts/font-alias
+
+.if defined(USE_IMAKE)
+BUILD_DEPENDS+= imake:${X_IMAKE_PORT}
+.endif
+
+.if defined(USE_DISPLAY) && !defined(DISPLAY)
+BUILD_DEPENDS+= Xvfb:${X_VFBSERVER_PORT} \
+ ${X11BASE}/lib/X11/fonts/misc/8x13O.pcf.gz:${X_FONTS_MISC_PORT} \
+ ${X11BASE}/lib/X11/fonts/misc/fonts.alias:${X_FONTS_ALIAS_PORT}
+.if !defined(PACKAGE_BUILDING)
+CONFIGURE_ENV+= DISPLAY="localhost:1001"
+MAKE_ENV+= DISPLAY="localhost:1001"
+.endif
+.endif
+
+.if defined(USE_XPM)
+IGNORE= USE_XPM is deprecated. Use USE_XORG=xpm instead.
+.endif
+
+XAWVER= 8
+PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist'
+
+PLIST_SUB+= XAWVER=${XAWVER}
+
+_GL_gl_LIB_DEPENDS= GL.1:${PORTSDIR}/graphics/libGL
+_GL_glu_LIB_DEPENDS= GLU.1:${PORTSDIR}/graphics/libGLU
+_GL_glw_LIB_DEPENDS= GLw.1:${PORTSDIR}/graphics/libGLw
+_GL_glut_LIB_DEPENDS= glut.3:${PORTSDIR}/graphics/libglut
+_GL_linux_RUN_DEPENDS= ${LINUXBASE}/usr/X11R6/lib/libGL.so.1:${PORTSDIR}/graphics/linux_dri
+
+.if defined(USE_GL)
+. if ${USE_GL:L} == "yes"
+USE_GL= glu
+. endif
+. for _component in ${USE_GL}
+. if !defined(_GL_${_component}_LIB_DEPENDS) && \
+ !defined(_GL_${_component}_RUN_DEPENDS)
+IGNORE= uses unknown GL component
+. else
+LIB_DEPENDS+= ${_GL_${_component}_LIB_DEPENDS}
+RUN_DEPENDS+= ${_GL_${_component}_RUN_DEPENDS}
+. endif
+. endfor
+.endif
+
+.if defined(USE_BISON)
+_BISON_DEPENDS= bison:${PORTSDIR}/devel/bison
+
+# XXX: backwards compatibility
+. if ${USE_BISON:L} == "yes"
+USE_BISON= build
+pre-everything::
+ @${ECHO_MSG} "WARNING: USE_BISON=yes deprecated, use build/run/both"
+. endif
+
+. if ${USE_BISON:L} == "build"
+BUILD_DEPENDS+= ${_BISON_DEPENDS}
+. elif ${USE_BISON:L} == "run"
+RUN_DEPENDS+= ${_BISON_DEPENDS}
+. elif ${USE_BISON:L} == "both"
+BUILD_DEPENDS+= ${_BISON_DEPENDS}
+RUN_DEPENDS+= ${_BISON_DEPENDS}
+. else
+IGNORE= uses unknown USE_BISON construct
+. endif
+
+.endif
+
+.if !defined(_PERL_REFACTORING_COMPLETE)
+PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
+ PERL_VER=${PERL_VERSION} \
+ PERL_ARCH=${PERL_ARCH} \
+ SITE_PERL=${SITE_PERL_REL}
+.endif # !defined(_PERL_REFACTORING_COMPLETE)
+
+.if defined(USE_LOCAL_MK)
+.include "${PORTSDIR}/Mk/bsd.local.mk"
+.endif
+
+.if defined(USE_XORG) || defined(XORG_CAT)
+.include "${PORTSDIR}/Mk/bsd.xorg.mk"
+.endif
+
+.if defined(USE_MYSQL) || defined(WANT_MYSQL_VER) || \
+ defined(USE_PGSQL) || defined(WANT_PGSQL_VER) || \
+ defined(USE_BDB) || defined(USE_SQLITE) || defined(USE_FIREBIRD)
+.include "${PORTSDIR}/Mk/bsd.database.mk"
+.endif
+
+.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80)
+.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
+.endif
+
+.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
+.include "${PORTSDIR}/Mk/bsd.efl.mk"
+.endif
+
+.if defined(USE_JAVA)
+.include "${PORTSDIR}/Mk/bsd.java.mk"
+.endif
+
+.if defined(USE_LINUX_RPM)
+.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
+.endif
+
+.if defined(USE_LINUX_APPS)
+.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
+.endif
+
+.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4
+.include "${PORTSDIR}/Mk/bsd.qt.mk"
+.endif
+
+.if defined(USE_SCONS)
+.include "${PORTSDIR}/Mk/bsd.scons.mk"
+.endif
+
+.if defined(USE_SDL) || defined(WANT_SDL)
+.include "${PORTSDIR}/Mk/bsd.sdl.mk"
+.endif
+
+#.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD)
+.include "${PORTSDIR}/Mk/bsd.perl.mk"
+#.endif
+
+.if defined(USE_PHP)
+.include "${PORTSDIR}/Mk/bsd.php.mk"
+.endif
+
+.if defined(USE_PYTHON)
+.include "${PORTSDIR}/Mk/bsd.python.mk"
+.endif
+
+.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TK) || defined(USE_TK_BUILD)
+.include "${PORTSDIR}/Mk/bsd.tcl.mk"
+.endif
+
+.if defined(USE_LUA) || defined(USE_LUA_NOT)
+.include "${PORTSDIR}/Mk/bsd.lua.mk"
+.endif
+
+.if defined(USE_WX) || defined(USE_WX_NOT)
+.include "${PORTSDIR}/Mk/bsd.wx.mk"
+.endif
+
+.if defined(USE_APACHE) || defined(APACHE_COMPAT)
+.include "${PORTSDIR}/Mk/bsd.apache.mk"
+.endif
+
+.if defined(USE_AUTOTOOLS)
+.include "${PORTSDIR}/Mk/bsd.autotools.mk"
+.endif
+
+.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
+.include "${PORTSDIR}/Mk/bsd.fpc.mk"
+.endif
+
+.if defined(WANT_GECKO) || defined(USE_GECKO)
+.include "${PORTSDIR}/Mk/bsd.gecko.mk"
+.endif
+
+.if defined(WANT_GNOME) || defined(USE_GNOME)
+.include "${PORTSDIR}/Mk/bsd.gnome.mk"
+.endif
+
+.if defined(USE_XFCE)
+.include "${PORTSDIR}/Mk/bsd.xfce.mk"
+.endif
+
+.if defined(USE_KDE4)
+.include "${PORTSDIR}/Mk/bsd.kde4.mk"
+.endif
+
+.if defined(USE_CMAKE)
+.include "${PORTSDIR}/Mk/bsd.cmake.mk"
+.endif
+
+.if exists(${PORTSDIR}/../Makefile.inc)
+.include "${PORTSDIR}/../Makefile.inc"
+USE_SUBMAKE= yes
+.endif
+
+.if defined(USE_XLIB)
+. if defined(USE_LINUX)
+RUN_DEPENDS+= ${LINUXBASE}/usr/X11R6/lib/libXrender.so.1:${PORTSDIR}/x11/linux-xorg-libs
+. else
+BUILD_DEPENDS+= ${X11BASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT}
+RUN_DEPENDS+= ${X11BASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT}
+. endif
+.endif
+
+.if defined(USE_XLIB) || defined(USE_XORG)
+# Add explicit X options to avoid problems with false positives in configure
+.if defined(GNU_CONFIGURE)
+CONFIGURE_ARGS+=--x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include
+.endif
+.endif
+
+# Set the default for the installation of Postscript(TM)-
+# compatible functionality.
+.if !defined(USE_GHOSTSCRIPT)
+. if defined(USE_GHOSTSCRIPT_BUILD)
+_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_BUILD}
+. elif defined(USE_GHOSTSCRIPT_RUN)
+_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_RUN}
+. endif
+.else
+_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT}
+.endif
+
+.if defined(WITH_GHOSTSCRIPT_VER) && !empty(WITH_GHOSTSCRIPT_VER:M[78])
+_USE_GHOSTSCRIPT_DEFAULT_VER= ${WITH_GHOSTSCRIPT_VER}
+.else
+_USE_GHOSTSCRIPT_DEFAULT_VER= 8
+.endif
+
+.if defined(_USE_GHOSTSCRIPT)
+. if !defined(WITHOUT_X11)
+_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=
+. else
+_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=-nox11
+. endif
+. if !empty(_USE_GHOSTSCRIPT:M[78])
+_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT:M[78]}
+. else
+_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
+. endif
+.else
+_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
+.endif
+
+# Sanity check
+.if defined(_USE_GHOSTSCRIPT) && defined(WITH_GHOSTSCRIPT_VER)
+. if empty(WITH_GHOSTSCRIPT_VER:M[78])
+. error You set an invalid value "${WITH_GHOSTSCRIPT_VER}" in WITH_GHOSTSCRIPT_VER. Abort.
+. elif ${_USE_GHOSTSCRIPT_VER} != ${WITH_GHOSTSCRIPT_VER}
+. error You set WITH_GHOSTSCRIPT_VER as ${WITH_GHOSTSCRIPT_VER} but ${PKGNAME} requires print/ghostscript${_USE_GHOSTSCRIPT_VER}. Abort.
+. endif
+.endif
+
+GHOSTSCRIPT_PORT?= print/ghostscript${_USE_GHOSTSCRIPT_VER}${_USE_GHOSTSCRIPT_PKGNAME_SUFFIX}
+
+# Set up the ghostscript dependencies.
+.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_BUILD)
+BUILD_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
+.endif
+.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_RUN)
+RUN_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
+.endif
+
+# Set up the cdrtools.
+.if defined(USE_CDRTOOLS)
+.if exists(${DOCSDIR}/cdrtools-cjk/README) || defined(WITH_CJK) || ${USE_CDRTOOLS:L} == "cjk"
+BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools-cjk
+RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools-cjk
+.else
+BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
+RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
+.endif
+.endif
+
+# Macro for doing in-place file editing using regexps
+REINPLACE_ARGS?= -i.bak
+REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS}
+
+# Names of cookies used to skip already completed stages
+EXTRACT_COOKIE?= ${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g}
+CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g}
+INSTALL_COOKIE?= ${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g}
+BUILD_COOKIE?= ${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g}
+PATCH_COOKIE?= ${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g}
+PACKAGE_COOKIE?= ${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g}
+
+# How to do nothing. Override if you, for some strange reason, would rather
+# do something.
+DO_NADA?= ${TRUE}
+
+# Use this as the first operand to always build dependency.
+NONEXISTENT?= /nonexistent
+
+CHECKSUM_ALGORITHMS?= md5 sha256
+
+MD5_FILE?= ${MASTERDIR}/distinfo
+
+MAKE_FLAGS?= -f
+MAKEFILE?= Makefile
+MAKE_ENV+= PREFIX=${PREFIX} \
+ LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} \
+ MOTIFLIB="${MOTIFLIB}" LIBDIR="${LIBDIR}" \
+ CC="${CC}" CFLAGS="${CFLAGS}" CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
+ MANPREFIX="${MANPREFIX}"
+
+# Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher.
+# gcc 4.x enable strict aliasing optimization with -O2 which is known to break
+# a lot of ports.
+.if !defined(WITHOUT_NO_STRICT_ALIASING)
+.if ${CC} != "icc"
+.if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing)
+CFLAGS+= -fno-strict-aliasing
+.endif
+.endif
+.endif
+
+.if defined(USE_CSTD)
+CFLAGS:= ${CFLAGS:N-std=*} -std=${USE_CSTD}
+.endif
+
+# Multiple make jobs support
+.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE)
+_MAKE_JOBS= #
+.else
+.if defined(MAKE_JOBS_SAFE) || defined(FORCE_MAKE_JOBS)
+MAKE_JOBS_NUMBER?= `${SYSCTL} -n kern.smp.cpus`
+_MAKE_JOBS= -j${MAKE_JOBS_NUMBER}
+.if defined(FORCE_MAKE_JOBS) && !defined(MAKE_JOBS_SAFE)
+BUILD_FAIL_MESSAGE+= "You have chosen to use multiple make jobs (parallelization) for all ports. This port was not tested for this setting. Please remove FORCE_MAKE_JOBS and retry the build before reporting the failure to the maintainer."
+.endif
+.endif
+.endif
+
+PTHREAD_CFLAGS?=
+PTHREAD_LIBS?= -pthread
+
+.if exists(/usr/bin/fetch)
+FETCH_BINARY?= /usr/bin/fetch
+FETCH_ARGS?= -ApRr
+FETCH_REGET?= 1
+.if !defined(DISABLE_SIZE)
+FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE}
+.endif
+.else
+FETCH_BINARY?= /usr/bin/ftp
+FETCH_ARGS?= -R
+FETCH_REGET?= 0
+.endif
+FETCH_CMD?= ${FETCH_BINARY} ${FETCH_ARGS}
+
+.if defined(RANDOMIZE_MASTER_SITES)
+.if exists(/usr/games/random)
+RANDOM_CMD?= /usr/games/random
+RANDOM_ARGS?= "-w -f -"
+_RANDOMIZE_SITES= " |${RANDOM_CMD} ${RANDOM_ARGS}"
+.endif
+.endif
+
+TOUCH?= /usr/bin/touch
+TOUCH_FLAGS?= -f
+
+DISTORIG?= .bak.orig
+PATCH?= /usr/bin/patch
+PATCH_STRIP?= -p0
+PATCH_DIST_STRIP?= -p0
+.if defined(PATCH_DEBUG)
+PATCH_DEBUG_TMP= yes
+PATCH_ARGS?= -d ${PATCH_WRKSRC} -E ${PATCH_STRIP}
+PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP}
+.else
+PATCH_DEBUG_TMP= no
+PATCH_ARGS?= -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP}
+PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
+.endif
+.if defined(BATCH)
+PATCH_ARGS+= --batch
+PATCH_DIST_ARGS+= --batch
+.endif
+
+# Prevent breakage with VERSION_CONTROL=numbered
+PATCH_ARGS+= -V simple
+
+.if defined(PATCH_CHECK_ONLY)
+PATCH_ARGS+= -C
+PATCH_DIST_ARGS+= -C
+.endif
+
+.if ${PATCH} == "/usr/bin/patch"
+PATCH_ARGS+= --suffix .orig
+PATCH_DIST_ARGS+= --suffix .orig
+.endif
+
+TAR?= /usr/bin/tar
+
+# EXTRACT_SUFX is defined in .pre.mk section
+.if defined(USE_ZIP)
+EXTRACT_CMD?= ${UNZIP_CMD}
+EXTRACT_BEFORE_ARGS?= -qo
+EXTRACT_AFTER_ARGS?= -d ${WRKDIR}
+.elif defined(USE_MAKESELF)
+EXTRACT_CMD?= ${UNMAKESELF_CMD}
+EXTRACT_BEFORE_ARGS?=
+EXTRACT_AFTER_ARGS?=
+.else
+EXTRACT_BEFORE_ARGS?= -dc
+.if defined(EXTRACT_PRESERVE_OWNERSHIP)
+EXTRACT_AFTER_ARGS?= | ${TAR} -xf -
+.else
+EXTRACT_AFTER_ARGS?= | ${TAR} -xf - --no-same-owner --no-same-permissions
+.endif
+.if defined(USE_BZIP2)
+EXTRACT_CMD?= ${BZIP2_CMD}
+.else
+EXTRACT_CMD?= ${GZIP_CMD}
+.endif
+.endif
+
+# Figure out where the local mtree file is
+.if !defined(MTREE_FILE) && !defined(NO_MTREE)
+.if ${PREFIX} == /usr
+MTREE_FILE= /etc/mtree/BSD.usr.dist
+.else
+MTREE_FILE= ${PORTSDIR}/Templates/BSD.local.dist
+.endif
+MTREE_FILE_DEFAULT=yes
+.endif
+MTREE_CMD?= /usr/sbin/mtree
+MTREE_ARGS?= -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p
+
+READLINK_CMD?= /usr/bin/readlink
+
+# Determine whether or not we can use rootly owner/group functions.
+.if !defined(UID)
+UID!= ${ID} -u
+.endif
+.if ${UID} == 0
+_BINOWNGRP= -o ${BINOWN} -g ${BINGRP}
+_SHROWNGRP= -o ${SHAREOWN} -g ${SHAREGRP}
+_MANOWNGRP= -o ${MANOWN} -g ${MANGRP}
+.else
+_BINOWNGRP=
+_SHROWNGRP=
+_MANOWNGRP=
+.endif
+
+# A few aliases for *-install targets
+INSTALL_PROGRAM= \
+ ${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE}
+INSTALL_KLD= \
+ ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
+INSTALL_SCRIPT= \
+ ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
+INSTALL_DATA= \
+ ${INSTALL} ${COPY} ${_SHROWNGRP} -m ${SHAREMODE}
+INSTALL_MAN= \
+ ${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE}
+
+INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
+ BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
+ BSD_INSTALL_DATA="${INSTALL_DATA}" \
+ BSD_INSTALL_MAN="${INSTALL_MAN}"
+MAKE_ENV+= ${INSTALL_MACROS}
+SCRIPTS_ENV+= ${INSTALL_MACROS}
+
+# Macro for copying entire directory tree with correct permissions
+.if ${UID} == 0
+COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+ 2>&1) && \
+ ${CHOWN} -R ${BINOWN}:${BINGRP} $$1 && \
+ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+ ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
+COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+ 2>&1) && \
+ ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} $$1 && \
+ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+ ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
+.else
+COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+ 2>&1) && \
+ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+ ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
+COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+ 2>&1) && \
+ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+ ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
+.endif
+
+# The user can override the NO_PACKAGE by specifying this from
+# the make command line
+.if defined(FORCE_PACKAGE)
+.undef NO_PACKAGE
+.endif
+
+DESCR?= ${PKGDIR}/pkg-descr
+PLIST?= ${PKGDIR}/pkg-plist
+PKGINSTALL?= ${PKGDIR}/pkg-install
+PKGDEINSTALL?= ${PKGDIR}/pkg-deinstall
+PKGREQ?= ${PKGDIR}/pkg-req
+PKGMESSAGE?= ${PKGDIR}/pkg-message
+
+TMPPLIST?= ${WRKDIR}/.PLIST.mktmp
+
+.for _CATEGORY in ${CATEGORIES}
+PKGCATEGORY?= ${_CATEGORY}
+.endfor
+_PORTDIRNAME= ${.CURDIR:T}
+PORTDIRNAME?= ${_PORTDIRNAME}
+PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME}
+
+
+.if !defined(PKG_ARGS)
+PKG_ARGS= -v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} actual-package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u -t : -k 2`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS}
+.if !defined(NO_MTREE)
+PKG_ARGS+= -m ${MTREE_FILE}
+.endif
+.if defined(PKGORIGIN)
+PKG_ARGS+= -o ${PKGORIGIN}
+.endif
+.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
+PKG_ARGS+= -C "${CONFLICTS}"
+.endif
+.endif
+.if defined(PKG_NOCOMPRESS)
+PKG_SUFX?= .tar
+.else
+PKG_SUFX?= .tbz
+.endif
+# where pkg_add records its dirty deeds.
+PKG_DBDIR?= /var/db/pkg
+
+MOTIFLIB?= -L${X11BASE}/lib -lXm -lXp
+
+ALL_TARGET?= all
+INSTALL_TARGET?= install
+
+# Popular master sites
+.include "${PORTSDIR}/Mk/bsd.sites.mk"
+
+# Empty declaration to avoid "variable MASTER_SITES recursive" error
+MASTER_SITES?=
+PATCH_SITES?=
+_MASTER_SITES_DEFAULT?=
+_PATCH_SITES_DEFAULT?=
+
+# Feed internal _{MASTER,PATCH}_SITES_n where n is a group designation
+# as per grouping rules (:something)
+# Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping
+# rules (:something)
+.for _S in ${MASTER_SITES}
+_S_TEMP= ${_S:S/^${_S:C@/?:[^/:]+$@/@}//:S/^://}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP= ${_group}
+. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+ @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
+ @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES"
+ @${FALSE}
+. endif
+_MASTER_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@}
+. endfor
+. else
+_MASTER_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@}
+. endif
+.endfor
+.for _S in ${PATCH_SITES}
+_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP= ${_group}
+. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+ @${ECHO_MSG} "The words all, ALL and default are reserved and cannot be"
+ @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES"
+ @${FALSE}
+. endif
+_PATCH_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@}
+. endfor
+. else
+_PATCH_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@}
+. endif
+.endfor
+
+# Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation
+# as per grouping rules (:something)
+# Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping
+# rules (:something)
+.for _S in ${MASTER_SITE_SUBDIR}
+_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP= ${_group}
+. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+ @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
+ @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR"
+ @${FALSE}
+. endif
+. if defined(_MASTER_SITES_${_group})
+_MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
+. endif
+. endfor
+. else
+. if defined(_MASTER_SITES_DEFAULT)
+_MASTER_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@}
+. endif
+. endif
+.endfor
+.for _S in ${PATCH_SITE_SUBDIR}
+_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP= ${_group}
+. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+ @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
+ @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR"
+ @${FALSE}
+. endif
+. if defined(_PATCH_SITES_${_group})
+_PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
+. endif
+. endfor
+. else
+. if defined(_PATCH_SITES_DEFAULT)
+_PATCH_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@}
+. endif
+. endif
+.endfor
+
+# Substitute subdirectory names
+# XXX simpler/faster solution but not the best space wise, suggestions please
+.for _S in ${MASTER_SITES}
+_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/,/ /g}
+. if !defined(_MASTER_SITE_SUBDIR_${_group})
+MASTER_SITES_TMP= ${_MASTER_SITES_${_group}:S^%SUBDIR%/^^}
+. else
+_S_TEMP_TEMP= ${_MASTER_SITES_${_group}:M*%SUBDIR%/*}
+. if empty(_S_TEMP_TEMP)
+MASTER_SITES_TMP= ${_MASTER_SITES_${_group}}
+. else
+MASTER_SITES_TMP=
+. for site in ${_MASTER_SITES_${_group}}
+_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
+. if empty(_S_TEMP_TEMP)
+MASTER_SITES_TMP+= ${site}
+. else
+. for dir in ${_MASTER_SITE_SUBDIR_${_group}}
+MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
+. endfor
+. endif
+. endfor
+. endif
+. endif
+_MASTER_SITES_${_group}:= ${MASTER_SITES_TMP}
+. endfor
+. endif
+.endfor
+.if defined(_MASTER_SITE_SUBDIR_DEFAULT)
+_S_TEMP= ${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*}
+. if empty(_S_TEMP)
+MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT}
+. else
+MASTER_SITES_TMP=
+. for site in ${_MASTER_SITES_DEFAULT}
+_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
+. if empty(_S_TEMP_TEMP)
+MASTER_SITES_TMP+= ${site}
+. else
+. for dir in ${_MASTER_SITE_SUBDIR_DEFAULT}
+MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
+. endfor
+. endif
+. endfor
+. endif
+.else
+MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^}
+.endif
+_MASTER_SITES_DEFAULT:= ${MASTER_SITES_TMP}
+MASTER_SITES_TMP=
+.for _S in ${PATCH_SITES}
+_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/,/ /g}
+. if !defined(_PATCH_SITE_SUBDIR_${_group})
+PATCH_SITES_TMP= ${_PATCH_SITES_${_group}:S^%SUBDIR%/^^}
+. else
+_S_TEMP_TEMP= ${_PATCH_SITES_${_group}:M*%SUBDIR%/*}
+. if empty(_S_TEMP_TEMP)
+PATCH_SITES_TMP= ${_PATCH_SITES_${_group}}
+. else
+PATCH_SITES_TMP=
+. for site in ${_PATCH_SITES_${_group}}
+_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
+. if empty(_S_TEMP_TEMP)
+PATCH_SITES_TMP+= ${site}
+. else
+. for dir in ${_PATCH_SITE_SUBDIR_${_group}}
+PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
+. endfor
+. endif
+. endfor
+. endif
+. endif
+_PATCH_SITES_${_group}:= ${PATCH_SITES_TMP}
+. endfor
+. endif
+.endfor
+.if defined(_PATCH_SITE_SUBDIR_DEFAULT)
+_S_TEMP= ${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*}
+. if empty(_S_TEMP)
+PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT}
+. else
+PATCH_SITES_TMP=
+. for site in ${_PATCH_SITES_DEFAULT}
+_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
+. if empty(_S_TEMP_TEMP)
+PATCH_SITES_TMP+= ${site}
+. else
+. for dir in ${_PATCH_SITE_SUBDIR_DEFAULT}
+PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
+. endfor
+. endif
+. endfor
+. endif
+.else
+PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^}
+.endif
+_PATCH_SITES_DEFAULT:= ${PATCH_SITES_TMP}
+PATCH_SITES_TMP=
+
+# The primary backup site.
+MASTER_SITE_BACKUP?= \
+ ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
+MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^}
+
+# If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository
+# for everything, but don't search it twice by appending it to the end.
+.if defined(MASTER_SITE_FREEBSD)
+_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP}
+_MASTER_SITE_BACKUP:= # empty
+.else
+_MASTER_SITE_OVERRIDE= ${MASTER_SITE_OVERRIDE}
+_MASTER_SITE_BACKUP= ${MASTER_SITE_BACKUP}
+.endif
+
+# Search CDROM first if mounted, symlink instead of copy if
+# FETCH_SYMLINK_DISTFILES is set
+.for MOUNTPT in ${CD_MOUNTPTS}
+.if exists(${MOUNTPT}/ports/distfiles)
+_MASTER_SITE_OVERRIDE:= file:${MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE}
+.if defined(FETCH_SYMLINK_DISTFILES)
+FETCH_BEFORE_ARGS+= -l
+.endif
+.endif
+.endfor
+
+NOFETCHFILES?=
+
+# Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL
+# according to grouping rules (:something)
+DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
+_MASTER_SITES_ALL= ${_MASTER_SITES_DEFAULT}
+_PATCH_SITES_ALL= ${_PATCH_SITES_DEFAULT}
+_G_TEMP= DEFAULT
+.for _D in ${DISTFILES}
+_D_TEMP= ${_D:S/^${_D:C/:[^:]+$//}//}
+. if !empty(_D_TEMP)
+. for _group in ${_D_TEMP:S/^://:S/,/ /g}
+. if !defined(_MASTER_SITES_${_group})
+_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/}
+. if empty(_G_TEMP_TEMP)
+_G_TEMP+= ${_group}
+_MASTER_SITES_ALL+= ${_MASTER_SITES_${_group}}
+. endif
+. endif
+. endfor
+_DISTFILES+= ${_D:C/:[^:]+$//}
+. else
+_DISTFILES+= ${_D}
+. endif
+.endfor
+_G_TEMP= DEFAULT
+.for _P in ${PATCHFILES}
+_P_TEMP= ${_P:S/^${_P:C/:[^:]+$//}//}
+. if !empty(_P_TEMP)
+. for _group in ${_P_TEMP:S/^://:S/,/ /g}
+. if !defined(_PATCH_SITES_${_group})
+_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/}
+. if empty(_G_TEMP_TEMP)
+_G_TEMP+= ${_group}
+_PATCH_SITES_ALL+= ${_PATCH_SITES_${_group}}
+. endif
+. endif
+. endfor
+_PATCHFILES+= ${_P:C/:[^:]+$//}
+. else
+_PATCHFILES+= ${_P}
+. endif
+.endfor
+_G_TEMP=
+_G_TEMP_TEMP=
+ALLFILES?= ${_DISTFILES} ${_PATCHFILES}
+
+#
+# Sort the master site list according to the patterns in MASTER_SORT
+#
+MASTER_SORT?=
+MASTER_SORT_REGEX?=
+MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|}
+
+MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; }
+.for srt in ${MASTER_SORT_REGEX}
+MASTER_SORT_AWK+= /${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; }
+.endfor
+MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
+
+SORTED_MASTER_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-DEFAULT
+SORTED_PATCH_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-DEFAULT
+SORTED_MASTER_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-ALL
+SORTED_PATCH_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-ALL
+
+#
+# Sort the master site list according to the patterns in MASTER_SORT
+# according to grouping rules (:something)
+#
+# for use in the fetch targets
+.for _S in ${MASTER_SITES}
+_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/^://:S/,/ /g}
+. if !target(master-sites-${_group})
+SORTED_MASTER_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-${_group}
+master-sites-${_group}:
+ @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+. endif
+. endfor
+. endif
+.endfor
+.for _S in ${PATCH_SITES}
+_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//}
+. if !empty(_S_TEMP)
+. for _group in ${_S_TEMP:S/^://:S/,/ /g}
+. if !target(patch-sites-${_group})
+SORTED_PATCH_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-${_group}
+patch-sites-${_group}:
+ @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+. endif
+. endfor
+. endif
+.endfor
+
+#
+# Hackery to enable simple fetch targets with several dynamic MASTER_SITES
+#
+_MASTER_SITES_ENV= _MASTER_SITES_DEFAULT="${_MASTER_SITES_DEFAULT}"
+.for _F in ${DISTFILES}
+_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://}
+. if !empty(_F_TEMP)
+. for _group in ${_F_TEMP:S/,/ /g}
+. if defined(_MASTER_SITES_${_group})
+_MASTER_SITES_ENV+= _MASTER_SITES_${_group}="${_MASTER_SITES_${_group}}"
+. endif
+. endfor
+. endif
+.endfor
+_PATCH_SITES_ENV= _PATCH_SITES_DEFAULT="${_PATCH_SITES_DEFAULT}"
+.for _F in ${PATCHFILES}
+_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://}
+. if !empty(_F_TEMP)
+. for _group in ${_F_TEMP:S/,/ /g}
+. if defined(_PATCH_SITES_${_group})
+_PATCH_SITES_ENV+= _PATCH_SITES_${_group}="${_PATCH_SITES_${_group}}"
+. endif
+. endfor
+. endif
+.endfor
+
+master-sites-ALL:
+ @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+patch-sites-ALL:
+ @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+# has similar effect to old targets, i.e., access only {MASTER,PATCH}_SITES, not working with the new _n variables
+master-sites-DEFAULT:
+ @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+patch-sites-DEFAULT:
+ @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+
+# synonyms, mnemonics
+master-sites-all: master-sites-ALL
+patch-sites-all: patch-sites-ALL
+master-sites-default: master-sites-DEFAULT
+patch-sites-default: patch-sites-DEFAULT
+
+# compatibility with old behavior
+master-sites: master-sites-DEFAULT
+patch-sites: patch-sites-DEFAULT
+
+.if defined(IGNOREFILES)
+.if !defined(CKSUMFILES)
+CKSUMFILES!= \
+ for file in ${ALLFILES}; do \
+ ignore=0; \
+ for tmp in ${IGNOREFILES}; do \
+ if [ "$$file" = "$$tmp" ]; then \
+ ignore=1; \
+ fi; \
+ done; \
+ if [ "$$ignore" = 0 ]; then \
+ ${ECHO_CMD} "$$file"; \
+ fi; \
+ done
+.endif
+.else
+CKSUMFILES= ${ALLFILES}
+.endif
+
+# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
+.if defined(DIST_SUBDIR)
+.if defined(CKSUMFILES) && ${CKSUMFILES}!=""
+_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
+.endif
+.if defined(IGNOREFILES) && ${IGNOREFILES}!=""
+_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
+.endif
+.else
+_CKSUMFILES?= ${CKSUMFILES}
+_IGNOREFILES?= ${IGNOREFILES}
+.endif
+
+# This is what is actually going to be extracted, and is overridable
+# by user.
+EXTRACT_ONLY?= ${_DISTFILES}
+
+.if !target(maintainer)
+maintainer:
+ @${ECHO_CMD} "${MAINTAINER}"
+.endif
+
+.if !target(check-makefile)
+check-makefile::
+.if !exists(/usr/share/mk/bsd.port.options.mk)
+ @${ECHO_CMD} "!!! Detected system without bsd.port.options.mk (probably old FreeBSD version)"
+ @${ECHO_CMD} "!!! Dropping bsd.port.options.mk into /usr/share/mk"
+ -@${ECHO_CMD} "USEOPTIONSMK= yes" > /usr/share/mk/bsd.port.options.mk 2>/dev/null
+ -@${ECHO_CMD} "INOPTIONSMK= yes" >> /usr/share/mk/bsd.port.options.mk 2>/dev/null
+ -@${ECHO_CMD} ".include <bsd.port.mk>" >> /usr/share/mk/bsd.port.options.mk 2>/dev/null
+ -@${ECHO_CMD} ".undef INOPTIONSMK" >> /usr/share/mk/bsd.port.options.mk 2>/dev/null
+.if exists(/usr/share/mk/bsd.port.options.mk)
+ @${ECHO_CMD} "!!! Done"
+.else
+ @${ECHO_CMD} "!!! Failed"
+.endif
+.endif
+ @${DO_NADA}
+.endif
+
+.if !defined(CATEGORIES)
+check-categories:
+ @${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory."
+ @${FALSE}
+.else
+
+VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \
+ benchmarks biology cad chinese comms converters databases \
+ deskutils devel docs dns editors elisp emulators finance french ftp \
+ games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \
+ ipv6 irc japanese java kde kld korean lang linux lisp \
+ mail math mbone misc multimedia net net-im net-mgmt net-p2p news \
+ palm parallel pear perl5 plan9 polish portuguese ports-mgmt \
+ print python ruby rubygems russian \
+ scheme science security shells spanish sysutils \
+ tcl textproc tk \
+ ukrainian vietnamese windowmaker www \
+ x11 x11-clocks x11-drivers x11-fm x11-fonts x11-servers x11-themes \
+ x11-toolkits x11-wm xfce zope
+
+check-categories:
+.for cat in ${CATEGORIES}
+ @if ${ECHO_CMD} ${VALID_CATEGORIES} | ${GREP} -wq ${cat}; then \
+ ${TRUE}; \
+ else \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \
+ ${FALSE}; \
+ fi
+.endfor
+.endif
+
+.if !target(check-makevars)
+check-makevars::
+ @${DO_NADA}
+.endif
+
+.if !target(check-depends)
+check-depends:
+ @${DO_NADA}
+.endif
+
+PKGREPOSITORYSUBDIR?= All
+PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
+.if exists(${PACKAGES})
+PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
+.else
+PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX}
+.endif
+
+# The "latest version" link -- ${PKGNAME} minus everthing after the last '-'
+PKGLATESTREPOSITORY?= ${PACKAGES}/Latest
+PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}
+LATEST_LINK?= ${PKGBASE}
+PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX}
+
+CONFIGURE_SCRIPT?= configure
+CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL}
+CONFIGURE_TARGET:= ${CONFIGURE_TARGET:S/--build=//}
+CONFIGURE_LOG?= config.log
+
+# A default message to print if do-configure fails.
+CONFIGURE_FAIL_MESSAGE?= "Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an \`ls ${PKG_DBDIR}\`)."
+
+.if defined(GNU_CONFIGURE)
+# Maximum command line length
+.if !defined(CONFIGURE_MAX_CMD_LEN)
+CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax
+.endif
+GNU_CONFIGURE_PREFIX?= ${PREFIX}
+CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX} $${_LATE_CONFIGURE_ARGS}
+CONFIGURE_ENV+= lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN}
+HAS_CONFIGURE= yes
+
+SET_LATE_CONFIGURE_ARGS= \
+ _LATE_CONFIGURE_ARGS="" ; \
+ if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--mandir'`" ]; then \
+ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --mandir=${MANPREFIX}/man" ; \
+ fi ; \
+ if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--infodir'`" ]; then \
+ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --infodir=${PREFIX}/${INFO_PATH}/${INFO_SUBDIR}" ; \
+ fi ; \
+ if [ -z "`./${CONFIGURE_SCRIPT} --version 2>&1 | ${EGREP} -i '(autoconf.*2\.13|Unrecognized option)'`" ]; then \
+ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --build=${CONFIGURE_TARGET}" ; \
+ else \
+ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET}" ; \
+ fi ;
+.endif
+
+# Passed to most of script invocations
+SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \
+ WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
+ SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
+ PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} \
+ X11BASE=${X11BASE}
+
+.if defined(BATCH)
+SCRIPTS_ENV+= BATCH=yes
+.endif
+
+.if ${PREFIX} == /usr
+MANPREFIX?= /usr/share
+.else
+MANPREFIX?= ${PREFIX}
+.endif
+
+.for sect in 1 2 3 4 5 6 7 8 9
+MAN${sect}PREFIX?= ${MANPREFIX}
+.endfor
+MANLPREFIX?= ${MANPREFIX}
+MANNPREFIX?= ${MANPREFIX}
+
+MANLANG?= "" # english only by default
+
+.if !defined(NO_MANCOMPRESS)
+MANEXT= .gz
+.endif
+
+.if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS)
+__pmlinks!= ${ECHO_CMD} '${MLINKS:S/ / /}' | ${AWK} \
+ '{ if (NF % 2 != 0) { print "broken"; exit; } \
+ for (i=1; i<=NF; i++) { \
+ if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \
+ { $$i = $$(i-2); printf " " $$i " "; } \
+ else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \
+ printf " " $$i " "; \
+ else \
+ { print "broken"; exit; } \
+ } \
+ }' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/$$$$$$$${__lang}/man\2/\1${MANEXT}g' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g'
+.if ${__pmlinks:Mbroken} == "broken"
+check-makevars::
+ @${ECHO_MSG} "${PKGNAME}: Makefile error: unable to parse MLINKS."
+ @${FALSE}
+.endif
+_MLINKS= ${_MLINKS_PREPEND}
+# XXX 20040119 This next line should read:
+# .for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
+# but there is currently a bug in make(1) that prevents the double-quote
+# substitution from working correctly. Once that problem is addressed,
+# and has had a enough time to mature, this hack should be removed.
+.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%}
+.for ___pmlinks in ${__pmlinks}
+.for __lang in ${lang}
+_MLINKS+= ${___pmlinks:S// /g}
+.endfor
+.endfor
+.endfor
+.endif
+_COUNT=0
+.for ___tpmlinks in ${_MLINKS}
+.if ${_COUNT} == "1"
+_TMLINKS+= ${___tpmlinks}
+_COUNT=0
+.else
+_COUNT=1
+.endif
+.endfor
+
+# XXX 20040119 This next line should read:
+# .for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
+# but there is currently a bug in make(1) that prevents the double-quote
+# substitution from working correctly. Once that problem is addressed,
+# and has had a enough time to mature, this hack should be removed.
+.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%}
+
+.for sect in 1 2 3 4 5 6 7 8 9 L N
+# MAN${sect} is for man pages installed for all languages in MANLANG for a given
+# section.
+.if defined(MAN${sect})
+_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
+.endif
+
+# Language specific MAN${sect} variables are for man pages installed in that
+# language, but not necessarily all languages in MANLANG.
+.if defined(MAN${sect}_${manlang:S%^man/%%:U})
+_MANPAGES+= ${MAN${sect}_${manlang:S%^man/%%:U}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
+.endif
+
+.endfor
+
+.endfor
+
+# Special case for English, since it is defined with "" in MANLANG rather than
+# a language name and does not have man pages installed in a lang subdirectory
+# of MAN${sect}PREFIX.
+.for sect in 1 2 3 4 5 6 7 8 9 L N
+.if defined(MAN${sect}_EN)
+_MANPAGES+= ${MAN${sect}_EN:S%^%${MAN${sect}PREFIX}/man/man${sect:L}/%}
+.endif
+.endfor
+
+.if !defined(_TMLINKS)
+_TMLINKS=
+.endif
+
+.if defined(_MANPAGES)
+
+.if defined(NO_MANCOMPRESS)
+__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%}
+.else
+__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%:S%$%.gz%}
+.endif
+
+.if ${MANCOMPRESSED} == "yes"
+_MANPAGES:= ${_MANPAGES:S%$%.gz%}
+.endif
+
+.endif
+
+.if ${PREFIX} == /usr
+INFO_PATH?= share/info
+.else
+INFO_PATH?= info
+.endif
+
+.if defined(INFO)
+. for D in ${INFO:H}
+RD:= ${D}
+. if ${RD} != "."
+. if !defined(INFO_SUBDIR)
+INFO_SUBDIR:= ${RD}
+. elif ${INFO_SUBDIR} != ${RD}
+BROKEN= only one subdirectory in INFO is allowed
+. endif
+. endif
+.undef RD
+. endfor
+.endif
+
+DOCSDIR_REL?= ${DOCSDIR:S,^${PREFIX}/,,}
+EXAMPLESDIR_REL?= ${EXAMPLESDIR:S,^${PREFIX}/,,}
+DATADIR_REL?= ${DATADIR:S,^${PREFIX}/,,}
+WWWDIR_REL?= ${WWWDIR:S,^${PREFIX}/,,}
+ETCDIR_REL?= ${ETCDIR:S,^${PREFIX}/,,}
+
+PLIST_SUB+= DOCSDIR="${DOCSDIR_REL}" \
+ EXAMPLESDIR="${EXAMPLESDIR_REL}" \
+ DATADIR="${DATADIR_REL}" \
+ WWWDIR="${WWWDIR_REL}" \
+ ETCDIR="${ETCDIR_REL}"
+
+DESKTOPDIR?= ${PREFIX}/share/applications
+_DESKTOPDIR_REL= ${DESKTOPDIR:S,^${PREFIX}/,,}/
+
+.if ${_DESKTOPDIR_REL} == ${DESKTOPDIR}/
+# DESKTOPDIR is not beneath PREFIX
+_DESKTOPDIR_REL=
+.endif
+
+# Put this as far down as possible so it will catch all PLIST_SUB definitions.
+
+.if defined(INSTALLS_SHLIB)
+LDCONFIG_DIRS?= %%PREFIX%%/lib
+LDCONFIG_PLIST!= ${ECHO_CMD} ${LDCONFIG_DIRS} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
+LDCONFIG_RUNLIST!= ${ECHO_CMD} ${LDCONFIG_PLIST} | ${SED} -e "s!%D!${PREFIX}!g"
+.endif
+
+.MAIN: all
+
+################################################################
+# Many ways to disable a port.
+#
+# If we're in BATCH mode and the port is interactive, or we're
+# in interactive mode and the port is non-interactive, skip all
+# the important targets. The reason we have two modes is that
+# one might want to leave a build in BATCH mode running
+# overnight, then come back in the morning and do _only_ the
+# interactive ones that required your intervention.
+#
+# Ignore ports that can't be resold if building for a CDROM.
+#
+# Don't build a port if it's restricted and we don't want to get
+# into that.
+#
+# Don't build a port if it's broken, unless we're running a parallel
+# build (in case it's fixed).
+#
+# Don't build a port if it's forbidden for whatever reason.
+#
+# Don't build a port if the system is too old.
+################################################################
+
+# Check the machine architectures
+.if defined(ONLY_FOR_ARCHS)
+.for __ARCH in ${ONLY_FOR_ARCHS}
+.if ${ARCH:M${__ARCH}} != ""
+__ARCH_OK?= 1
+.endif
+.endfor
+.else
+__ARCH_OK?= 1
+.endif
+
+.if defined(NOT_FOR_ARCHS)
+.for __NARCH in ${NOT_FOR_ARCHS}
+.if ${ARCH:M${__NARCH}} != ""
+.undef __ARCH_OK
+.endif
+.endfor
+.endif
+
+.if !defined(__ARCH_OK)
+.if defined(ONLY_FOR_ARCHS)
+IGNORE= is only for ${ONLY_FOR_ARCHS},
+.else # defined(NOT_FOR_ARCHS)
+IGNORE= does not run on ${NOT_FOR_ARCHS},
+.endif
+IGNORE+= while you are running ${ARCH}
+
+.if defined(ONLY_FOR_ARCHS_REASON_${ARCH})
+IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}})
+.elif defined(ONLY_FOR_ARCHS_REASON)
+IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON})
+.endif
+
+.if defined(NOT_FOR_ARCHS_REASON_${ARCH})
+IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON_${ARCH}})
+.elif defined(NOT_FOR_ARCHS_REASON)
+IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON})
+.endif
+
+.endif
+
+# Check the user interaction and legal issues
+.if !defined(NO_IGNORE)
+.if (defined(IS_INTERACTIVE) && defined(BATCH))
+IGNORE= is an interactive port
+.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
+IGNORE= is not an interactive port
+.elif (defined(NO_CDROM) && defined(FOR_CDROM))
+IGNORE= may not be placed on a CDROM: ${NO_CDROM}
+.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
+IGNORE= is restricted: ${RESTRICTED}
+.elif defined(BROKEN)
+.if !defined(TRYBROKEN)
+IGNORE= is marked as broken: ${BROKEN}
+.endif
+.elif defined(FORBIDDEN)
+IGNORE= is forbidden: ${FORBIDDEN}
+.endif
+
+.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING))
+IGNORE= has to be built manually: ${MANUAL_PACKAGE_BUILD}
+clean:
+ @${IGNORECMD}
+.endif
+
+.if defined(IGNORE)
+.if defined(IGNORE_SILENT)
+IGNORECMD= ${DO_NADA}
+.else
+IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} "${IGNORE:Q}.;exit 1
+.endif
+
+.for target in check-sanity fetch checksum extract patch configure all build install reinstall package
+.if !target(${target})
+${target}:
+ @${IGNORECMD}
+.if defined(INSTALLS_DEPENDS)
+ @${FALSE}
+.endif
+.endif
+.endfor
+
+.endif
+
+.endif
+
+.if defined(IGNORE) || defined(NO_PACKAGE)
+ignorelist: package-name
+.else
+ignorelist:
+ @${DO_NADA}
+.endif
+
+.if defined(IGNORE) || defined(NO_PACKAGE)
+ignorelist-verbose:
+.if defined(IGNORE)
+ @${ECHO_CMD} "${PKGNAME}|IGNORE: "${IGNORE:Q}
+.else
+ @${ECHO_CMD} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q}
+.endif
+.else
+ignorelist-verbose:
+ @${DO_NADA}
+.endif
+
+################################################################
+# Clean directories for ftp or CDROM.
+################################################################
+
+.if defined(RESTRICTED)
+clean-restricted: delete-distfiles delete-package
+clean-restricted-list: delete-distfiles-list delete-package-list
+RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES}
+.else
+clean-restricted:
+clean-restricted-list:
+.endif
+
+.if defined(NO_CDROM)
+clean-for-cdrom: delete-distfiles delete-package
+clean-for-cdrom-list: delete-distfiles-list delete-package-list
+RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES}
+.else
+clean-for-cdrom:
+clean-for-cdrom-list:
+.endif
+
+.if defined(ALL_HOOK)
+all:
+ @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
+ DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
+ PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
+ FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
+ BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
+ CONFLICTS="${CONFLICTS}" \
+ ${ALL_HOOK}
+.endif
+
+.if !target(all)
+all: build
+.endif
+
+.if !defined(DEPENDS_TARGET)
+.if defined(DEPENDS_PRECLEAN)
+DEPENDS_TARGET= clean
+DEPENDS_ARGS= NOCLEANDEPENDS=yes
+.endif
+.if make(reinstall)
+DEPENDS_TARGET+= reinstall
+.else
+DEPENDS_TARGET+= install
+.endif
+.if defined(DEPENDS_CLEAN)
+DEPENDS_TARGET+= clean
+DEPENDS_ARGS+= NOCLEANDEPENDS=yes
+.endif
+.endif
+
+################################################################
+#
+# Do preliminary work to detect if we need to run the config
+# target or not.
+#
+################################################################
+.if (!defined(OPTIONS) || defined(CONFIG_DONE_${UNIQUENAME:U}) || \
+ defined(PACKAGE_BUILDING) || defined(BATCH))
+_OPTIONS_OK=yes
+.endif
+
+################################################################
+# The following are used to create easy dummy targets for
+# disabling some bit of default target behavior you don't want.
+# They still check to see if the target exists, and if so don't
+# do anything, since you might want to set this globally for a
+# group of ports in a Makefile.inc, but still be able to
+# override from an individual Makefile.
+################################################################
+
+# Disable checksum
+.if defined(NO_CHECKSUM) && !target(checksum)
+checksum: fetch
+ @${DO_NADA}
+.endif
+
+# Disable build
+.if defined(NO_BUILD) && !target(build)
+build: configure
+ @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
+.endif
+
+# Disable install
+.if defined(NO_INSTALL) && !target(install)
+install: build
+ @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
+.endif
+
+# Disable package
+.if defined(NO_PACKAGE) && !target(package)
+package:
+.if defined(IGNORE_SILENT)
+ @${DO_NADA}
+.else
+ @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}.
+.endif
+.endif
+
+# Disable describe
+.if defined(NO_DESCRIBE) && !target(describe)
+describe:
+ @${DO_NADA}
+.endif
+
+################################################################
+# More standard targets start here.
+#
+# These are the body of the build/install framework. If you are
+# not happy with the default actions, and you can't solve it by
+# adding pre-* or post-* targets/scripts, override these.
+################################################################
+
+# Pre-everything
+
+# XXX MCL suggests deprecating this in favor of something
+# less likely to be abused by overloading
+pre-everything::
+ @${DO_NADA}
+
+buildanyway-message:
+.if defined(TRYBROKEN) && defined(BROKEN)
+ @${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN."
+.else
+ @${DO_NADA}
+.endif
+
+options-message:
+.if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH))
+ @for m in ${GNOME_OPTION_MSG}; do \
+ ${ECHO_MSG} $$m; \
+ done
+.else
+ @${DO_NADA}
+.endif
+.if defined(_OPTIONS_READ)
+ @${ECHO_MSG} "===> Found saved configuration for ${_OPTIONS_READ}"
+.if ${OPTIONSFILE} != ${OPTIONSFILE}
+ @${ECHO_MSG} "===> *** CAUTION *** Using wrong configuration file ${OPTIONSFILE}"
+.endif
+.endif
+
+
+# Warn user about deprecated packages. Advisory only.
+
+.if !target(check-deprecated)
+check-deprecated:
+.if defined(DEPRECATED)
+ @${ECHO_MSG} "===> NOTICE:"
+ @${ECHO_MSG}
+ @${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:"
+ @${ECHO_MSG}
+ @${ECHO_MSG} ${DEPRECATED:Q}.
+ @${ECHO_MSG}
+.if defined(EXPIRATION_DATE)
+ @${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}."
+ @${ECHO_MSG}
+.endif
+.endif
+.endif
+
+# Check if the port is listed in the vulnerability database
+
+AUDITFILE?= /var/db/portaudit/auditfile.tbz
+_EXTRACT_AUDITFILE= ${TAR} -jxOf "${AUDITFILE}" auditfile
+
+check-vulnerable:
+.if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING)
+ @if [ -f "${AUDITFILE}" ]; then \
+ audit_created=`${_EXTRACT_AUDITFILE} | \
+ ${SED} -nEe "1s/^#CREATED: *([0-9]{4})-?([0-9]{2})-?([0-9]{2}).*$$/\1\2\3/p"`; \
+ audit_expiry=`/bin/date -u -v-14d "+%Y%m%d"`; \
+ if [ "$$audit_created" -lt "$$audit_expiry" ]; then \
+ ${ECHO_MSG} "===> WARNING: Vulnerability database out of date, checking anyway"; \
+ fi; \
+ vlist=`${_EXTRACT_AUDITFILE} | ${GREP} "${PORTNAME}" | \
+ ${AWK} -F\| ' /^[^#]/ { \
+ if (!system("${PKG_VERSION} -T \"${PKGNAME}\" \"" $$1 "\"")) \
+ print "=> " $$3 ".\n Reference: <" $$2 ">" \
+ } \
+ '`; \
+ if [ -n "$$vlist" ]; then \
+ ${ECHO_MSG} "===> ${PKGNAME} has known vulnerabilities:"; \
+ ${ECHO_MSG} "$$vlist"; \
+ ${ECHO_MSG} "=> Please update your ports tree and try again."; \
+ exit 1; \
+ fi; \
+ else \
+ ${ECHO_MSG} "===> Vulnerability check disabled, database not found"; \
+ fi
+.endif
+
+# set alg to any of SIZE, MD5, SHA256 (or any other checksum algorithm):
+DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${MD5_FILE}" ]; then exit; fi; \
+ DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file} \
+ '$$1 == alg && $$2 == "(" file ")" {print $$4}' ${MD5_FILE}
+
+# Fetch
+
+.if !target(do-fetch)
+do-fetch:
+ @${MKDIR} ${_DISTDIR}
+ @cd ${_DISTDIR};\
+ ${_MASTER_SITES_ENV} ; \
+ for _file in ${DISTFILES}; do \
+ file=$${_file%%:*}; \
+ if [ $$_file = $$file ]; then \
+ select=''; \
+ else \
+ select=`${ECHO_CMD} $${_file##*:} | ${SED} -e 's/,/ /g'` ; \
+ fi; \
+ force_fetch=false; \
+ filebasename=$${file##*/}; \
+ for afile in ${FORCE_FETCH}; do \
+ afile=$${afile##*/}; \
+ if [ "x$$afile" = "x$$filebasename" ]; then \
+ force_fetch=true; \
+ fi; \
+ done; \
+ if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
+ if [ -L $$file -o -L $$filebasename ]; then \
+ ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
+ ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
+ ${ECHO_MSG} "=> Please correct this problem and try again."; \
+ exit 1; \
+ fi; \
+ if [ -f ${MD5_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
+ _md5sum=`alg=MD5; ${DISTINFO_DATA}`; \
+ if [ -z "$$_md5sum" ]; then \
+ ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${MD5_FILE}."; \
+ ${ECHO_MSG} "=> Either ${MD5_FILE} is out of date, or"; \
+ ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \
+ exit 1; \
+ fi; \
+ fi; \
+ ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
+ if [ ! -w ${DISTDIR} ]; then \
+ ${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \
+ exit 1; \
+ fi; \
+ if [ ! -z "$$select" ] ; then \
+ __MASTER_SITES_TMP= ; \
+ for group in $$select; do \
+ if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
+ eval ___MASTER_SITES_TMP="\$${_MASTER_SITES_$${group}}" ; \
+ __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
+ fi; \
+ done; \
+ ___MASTER_SITES_TMP= ; \
+ SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+ else \
+ SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
+ fi; \
+ for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+ ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
+ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+ case $${file} in \
+ */*) ${MKDIR} $${file%/*}; \
+ args="-o $${file} $${site}$${file}";; \
+ *) args=$${site}$${file};; \
+ esac; \
+ if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
+ continue 2; \
+ fi; \
+ done; \
+ ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
+ ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
+ exit 1; \
+ fi; \
+ done
+.if defined(PATCHFILES)
+ @cd ${_DISTDIR};\
+ ${_PATCH_SITES_ENV} ; \
+ for _file in ${PATCHFILES}; do \
+ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
+ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+ force_fetch=false; \
+ filebasename=$${file##*/}; \
+ for afile in ${FORCE_FETCH}; do \
+ afile=$${afile##*/}; \
+ if [ "x$$afile" = "x$$filebasename" ]; then \
+ force_fetch=true; \
+ fi; \
+ done; \
+ if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
+ if [ -L $$file -o -L $${file##*/} ]; then \
+ ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
+ ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
+ ${ECHO_MSG} "=> Please correct this problem and try again."; \
+ exit 1; \
+ fi; \
+ ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
+ if [ ! -z "$$select" ] ; then \
+ __PATCH_SITES_TMP= ; \
+ for group in $$select; do \
+ if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
+ eval ___PATCH_SITES_TMP="\$${_PATCH_SITES_$${group}}" ; \
+ __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
+ fi; \
+ done; \
+ ___PATCH_SITES_TMP= ; \
+ SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+ else \
+ SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
+ fi; \
+ for site in `eval $$SORTED_PATCH_SITES_CMD_TMP`; do \
+ ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
+ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+ case $${file} in \
+ */*) ${MKDIR} $${file%/*}; \
+ args="-o $${file} $${site}$${file}";; \
+ *) args=$${site}$${file};; \
+ esac; \
+ if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
+ continue 2; \
+ fi; \
+ done; \
+ ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
+ ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
+ exit 1; \
+ fi; \
+ done
+.endif
+.endif
+
+# Extract
+
+.if !target(do-extract)
+do-extract:
+ @${RM} -rf ${WRKDIR}
+ @${MKDIR} ${WRKDIR}
+ @for file in ${EXTRACT_ONLY}; do \
+ if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
+ then \
+ exit 1; \
+ fi; \
+ done
+.if !defined(EXTRACT_PRESERVE_OWNERSHIP)
+ @if [ `${ID} -u` = 0 ]; then \
+ ${CHMOD} -R ug-s ${WRKDIR}; \
+ ${CHOWN} -R 0:0 ${WRKDIR}; \
+ fi
+.endif
+.endif
+
+# Patch
+
+.if !target(patch-dos2unix)
+patch-dos2unix:
+.if defined(USE_DOS2UNIX)
+.if ${USE_DOS2UNIX:U}=="YES"
+ @${ECHO_MSG} "===> Converting DOS text files to UNIX text files"
+ @${FIND} -E ${WRKSRC} -type f -iregex '${DOS2UNIX_REGEX}' -print0 | \
+ ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//'
+.else
+ @${ECHO_MSG} "===> Converting DOS text file to UNIX text file: ${f}"
+.if ${USE_DOS2UNIX:M*/*}
+.for f in ${USE_DOS2UNIX}
+ @${REINPLACE_CMD} -i '' -e 's/
$$//' ${WRKSRC}/${f}
+.endfor
+.else
+.for f in ${USE_DOS2UNIX}
+ @${FIND} ${WRKSRC} -type f -name '${f}' -print0 | \
+ ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//'
+.endfor
+.endif
+.endif
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !target(do-patch)
+do-patch:
+.if defined(PATCHFILES)
+ @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
+ @(cd ${_DISTDIR}; \
+ for i in ${_PATCHFILES}; do \
+ if [ ${PATCH_DEBUG_TMP} = yes ]; then \
+ ${ECHO_MSG} "===> Applying distribution patch $$i" ; \
+ fi; \
+ case $$i in \
+ *.Z|*.gz) \
+ ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
+ ;; \
+ *.bz2) \
+ ${BZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
+ ;; \
+ *) \
+ ${PATCH} ${PATCH_DIST_ARGS} < $$i; \
+ ;; \
+ esac; \
+ done)
+.endif
+.if defined(EXTRA_PATCHES)
+ @for i in ${EXTRA_PATCHES}; do \
+ ${ECHO_MSG} "===> Applying extra patch $$i"; \
+ ${PATCH} ${PATCH_ARGS} < $$i; \
+ done
+.endif
+ @if [ -d ${PATCHDIR} ]; then \
+ if [ "`${ECHO_CMD} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \
+ ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
+ PATCHES_APPLIED="" ; \
+ for i in ${PATCHDIR}/patch-*; do \
+ case $$i in \
+ *.orig|*.rej|*~|*,v) \
+ ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
+ ;; \
+ *) \
+ if [ ${PATCH_DEBUG_TMP} = yes ]; then \
+ ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
+ fi; \
+ if ${PATCH} ${PATCH_ARGS} < $$i ; then \
+ PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \
+ else \
+ ${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
+ if [ x"$$PATCHES_APPLIED" != x"" ]; then \
+ ${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
+ fi; \
+ ${FALSE} ; \
+ fi; \
+ ;; \
+ esac; \
+ done; \
+ fi; \
+ fi
+.endif
+
+.if !target(run-autotools)
+run-autotools:
+ @${DO_NADA}
+.endif
+
+# Configure
+
+.if !target(do-configure)
+do-configure:
+ @if [ -f ${SCRIPTDIR}/configure ]; then \
+ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
+ ${SCRIPTDIR}/configure; \
+ fi
+.if defined(GNU_CONFIGURE)
+ @CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \
+ | ${XARGS} -n 1 ${DIRNAME}); \
+ for _D in $${CONFIG_GUESS_DIRS}; do \
+ ${CP} -f ${TEMPLATES}/config.guess $${_D}/config.guess; \
+ ${CHMOD} a+rx $${_D}/config.guess; \
+ ${CP} -f ${TEMPLATES}/config.sub $${_D}/config.sub; \
+ ${CHMOD} a+rx $${_D}/config.sub; \
+ done
+.endif
+.if defined(HAS_CONFIGURE)
+ @(cd ${CONFIGURE_WRKSRC} && \
+ ${SET_LATE_CONFIGURE_ARGS} \
+ if ! ${SETENV} CC="${CC}" CXX="${CXX}" \
+ CFLAGS="${CFLAGS}" CXXFLAGS="${CXXFLAGS}" \
+ INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \
+ INSTALL_DATA="${INSTALL_DATA}" \
+ INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
+ INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
+ ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \
+ ${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \
+ (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
+ ${FALSE}; \
+ fi)
+.endif
+.if defined(USE_IMAKE)
+ @(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF})
+.endif
+.endif
+
+# Build
+
+.if !target(do-build)
+do-build:
+.if defined(USE_GMAKE)
+ @(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \
+ if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \
+ ${ECHO_MSG} "===> Compilation failed unexpectedly."; \
+ (${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
+ fi; \
+ ${FALSE}; \
+ fi)
+.else
+ @(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \
+ if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \
+ ${ECHO_MSG} "===> Compilation failed unexpectedly."; \
+ (${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
+ fi; \
+ ${FALSE}; \
+ fi)
+.endif
+.endif
+
+# Check conflicts
+
+.if !target(check-conflicts)
+check-conflicts:
+.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
+ @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+ conflicts_with=; \
+ for entry in $${found}; do \
+ if ${PKG_INFO} -e $${entry} ; then \
+ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+ conflicts_with="$${conflicts_with} $${entry}"; \
+ fi; \
+ fi; \
+ done; \
+ if [ -n "$${conflicts_with}" ]; then \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
+ for entry in $${conflicts_with}; do \
+ ${ECHO_MSG} " $${entry}"; \
+ done; \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} " They install files into the same place."; \
+ ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
+ exit 1; \
+ fi
+.endif # CONFLICTS
+.endif
+
+# Install
+
+.if !target(do-install)
+do-install:
+.if defined(USE_GMAKE)
+ @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
+.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
+ @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
+.endif
+.else # !defined(USE_GMAKE)
+ @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
+.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
+ @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
+.endif
+.endif
+.endif
+
+# Package
+
+.if !target(do-package)
+do-package: ${TMPPLIST}
+ @if [ -d ${PACKAGES} ]; then \
+ if [ ! -d ${PKGREPOSITORY} ]; then \
+ if ! ${MKDIR} ${PKGREPOSITORY}; then \
+ ${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
+ exit 1; \
+ fi; \
+ fi; \
+ fi
+ @__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \
+ _LATE_PKG_ARGS=""; \
+ if [ -f ${PKGINSTALL} ]; then \
+ _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -i ${PKGINSTALL}"; \
+ fi; \
+ if [ -f ${PKGDEINSTALL} ]; then \
+ _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -k ${PKGDEINSTALL}"; \
+ fi; \
+ if [ -f ${PKGREQ} ]; then \
+ _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -r ${PKGREQ}"; \
+ fi; \
+ if [ -f ${PKGMESSAGE} ]; then \
+ _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -D ${PKGMESSAGE}"; \
+ fi; \
+ if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
+ if [ -d ${PACKAGES} ]; then \
+ cd ${.CURDIR} && eval ${MAKE} $${__softMAKEFLAGS} package-links; \
+ fi; \
+ else \
+ cd ${.CURDIR} && eval ${MAKE} $${__softMAKEFLAGS} delete-package; \
+ exit 1; \
+ fi
+.endif
+
+# Some support rules for do-package
+
+.if !target(package-links)
+package-links: delete-package-links
+ @for cat in ${CATEGORIES}; do \
+ if [ ! -d ${PACKAGES}/$$cat ]; then \
+ if ! ${MKDIR} ${PACKAGES}/$$cat; then \
+ ${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
+ exit 1; \
+ fi; \
+ fi; \
+ ${LN} -sf `${ECHO_CMD} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
+ done
+.if !defined(NO_LATEST_LINK)
+ @if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
+ if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
+ ${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \
+ exit 1; \
+ fi; \
+ fi
+ @${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE}
+.endif
+.endif
+
+.if !target(delete-package-links)
+delete-package-links:
+ @for cat in ${CATEGORIES}; do \
+ ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
+ done
+.if !defined(NO_LATEST_LINK)
+ @${RM} -f ${PKGLATESTFILE}
+.endif
+.endif
+
+.if !target(delete-package)
+delete-package: delete-package-links
+ @${RM} -f ${PKGFILE}
+.endif
+
+.if !target(delete-package-links-list)
+delete-package-links-list:
+ @for cat in ${CATEGORIES}; do \
+ ${ECHO_CMD} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
+ done
+.if !defined(NO_LATEST_LINK)
+ @${ECHO_CMD} ${RM} -f ${PKGLATESTFILE}
+.endif
+.endif
+
+.if !target(delete-package-list)
+delete-package-list: delete-package-links-list
+ @${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})"
+.endif
+
+# Utility targets follow
+
+.if !target(check-already-installed)
+check-already-installed:
+.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
+ @${ECHO_MSG} "===> Checking if ${PKGORIGIN} already installed"; \
+ ${MKDIR} ${PKG_DBDIR}; \
+ already_installed=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
+ if [ -n "$${already_installed}" ]; then \
+ for p in $${already_installed}; do \
+ prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
+ if [ "x${PREFIX}" = "x$${prfx}" ]; then \
+ df=`${PKG_INFO} -q -f $${p} 2> /dev/null | ${GREP} -v "^@" | ${COMM} -12 - ${TMPPLIST}`; \
+ if [ -n "$${df}" ]; then \
+ found_package=$${p}; \
+ break; \
+ fi; \
+ fi; \
+ done; \
+ fi; \
+ if [ -d ${PKG_DBDIR}/${PKGNAME} -o -n "$${found_package}" ]; then \
+ if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \
+ ${ECHO_CMD} "===> ${PKGNAME} is already installed"; \
+ else \
+ ${ECHO_CMD} "===> An older version of ${PKGORIGIN} is already installed ($${found_package})"; \
+ fi; \
+ ${ECHO_MSG} " You may wish to \`\`make deinstall'' and install this port again"; \
+ ${ECHO_MSG} " by \`\`make reinstall'' to upgrade it properly."; \
+ ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGORIGIN}"; \
+ ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
+ ${ECHO_MSG} " in your environment or the \"make install\" command line."; \
+ exit 1; \
+ fi
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !target(check-umask)
+check-umask:
+ @if [ `${SH} -c umask` != 0022 ]; then \
+ ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
+ ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
+ ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
+ fi
+.endif
+
+.if !target(install-mtree)
+install-mtree:
+ @${MKDIR} ${PREFIX}
+ @if [ `${ID} -u` != 0 ]; then \
+ if [ -w ${PREFIX}/ ]; then \
+ ${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \
+ else \
+ ${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \
+ ${FALSE}; \
+ fi; \
+ fi
+.if !defined(NO_MTREE)
+ @if [ `${ID} -u` = 0 ]; then \
+ if [ ! -f ${MTREE_FILE} ]; then \
+ ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
+ ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
+ exit 1; \
+ else \
+ ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
+ if [ ${PREFIX} = ${LOCALBASE} -a "${MTREE_FILE_DEFAULT}" = "yes" ]; then \
+ cd ${PREFIX}/share/nls; \
+ for link in POSIX en_US.US-ASCII; \
+ do \
+ if [ x"`${READLINK_CMD} $${link}`" != x"C" ]; \
+ then \
+ ${LN} -shf C $${link}; \
+ fi; \
+ done; \
+ fi; \
+ fi; \
+ else \
+ ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
+ ${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \
+ fi
+.endif
+.endif
+
+.if !target(install-ldconfig-file)
+install-ldconfig-file:
+.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) || defined(INSTALLS_SHLIB)
+.if defined(USE_LDCONFIG)
+.if defined(USE_LINUX_PREFIX)
+ @${ECHO_MSG} "===> Running linux ldconfig"
+ ${LDCONFIG_CMD}
+.else
+.if !defined(INSTALL_AS_USER)
+ @${ECHO_MSG} "===> Running ldconfig"
+ ${LDCONFIG} -m ${USE_LDCONFIG}
+.else
+ @${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
+ -${LDCONFIG} -m ${USE_LDCONFIG}
+.endif
+.if ${USE_LDCONFIG} != "${PREFIX}/lib" && !defined(INSTALL_AS_USER)
+ @${ECHO_MSG} "===> Installing ldconfig configuration file"
+.if defined(NO_LDCONFIG_MTREE)
+ @${MKDIR} ${PREFIX}/${LDCONFIG_DIR}
+.endif
+ @${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \
+ > ${PREFIX}/${LDCONFIG_DIR}/${UNIQUENAME}
+ @${ECHO_CMD} "@cwd" >> ${TMPPLIST}
+ @${ECHO_CMD} ${LDCONFIG_DIR}/${UNIQUENAME} >> ${TMPPLIST}
+.if defined(NO_LDCONFIG_MTREE)
+ @${ECHO_CMD} "@unexec rmdir ${LDCONFIG_DIR} >/dev/null 2>&1 || true" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+.endif
+.if defined(USE_LDCONFIG32)
+.if !defined(INSTALL_AS_USER)
+ @${ECHO_MSG} "===> Running ldconfig"
+ ${LDCONFIG} -32 -m ${USE_LDCONFIG32}
+.else
+ @${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
+ -${LDCONFIG} -32 -m ${USE_LDCONFIG32}
+.endif
+.if !defined(INSTALL_AS_USER)
+ @${ECHO_MSG} "===> Installing 32-bit ldconfig configuration file"
+.if defined(NO_LDCONFIG_MTREE)
+ @${MKDIR} ${PREFIX}/${LDCONFIG_32DIR}
+.endif
+ @${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \
+ > ${PREFIX}/${LDCONFIG32_DIR}/${UNIQUENAME}
+ @${ECHO_CMD} "@cwd" >> ${TMPPLIST}
+ @${ECHO_CMD} ${LDCONFIG32_DIR}/${UNIQUENAME} >> ${TMPPLIST}
+.if defined(NO_LDCONFIG_MTREE)
+ @${ECHO_CMD} "@unexec rmdir ${LDCONFIG32_DIR} >/dev/null 2>&1" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+# This can be removed once all ports have been converted to USE_LDCONFIG.
+.if defined(INSTALLS_SHLIB)
+.if defined(USE_LDCONFIG)
+ @${ECHO_MSG} "===> INSTALLS_SHLIB and USE_LDCONFIG both defined."
+.endif
+.if defined(USE_LDCONFIG32)
+ @${ECHO_MSG} "===> INSTALLS_SHLIB and USE_LDCONFIG32 both defined."
+.endif
+.if !defined(INSTALL_AS_USER)
+ @${ECHO_MSG} "===> Running ldconfig"
+ ${LDCONFIG_CMD}
+.else
+ @${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
+ -${LDCONFIG_CMD}
+.endif
+.endif
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !target(create-users-groups)
+create-users-groups:
+.if defined(GROUPS) || defined(USERS)
+.if defined(GROUPS)
+.for _file in ${GID_FILES}
+.if !exists(${_file})
+ @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
+.endif
+.endfor
+ @${ECHO_MSG} "===> Creating users and/or groups."
+.for _group in ${GROUPS}
+# _bgpd:*:130:
+ @if ! ${GREP} -h ^${_group}: ${GID_FILES} >/dev/null 2>&1; then \
+ ${ECHO_CMD} "** Cannot find any information about group \`${_group}' in ${GID_FILES}."; \
+ exit 1; \
+ fi
+ @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
+ gid=$$(($$gid+${GID_OFFSET})); \
+ if ! ${PW} groupshow $$group >/dev/null 2>&1; then \
+ ${ECHO_MSG} "Creating group \`$$group' with gid \`$$gid'."; \
+ ${PW} groupadd $$group -g $$gid; \
+ else \
+ ${ECHO_MSG} "Using existing group \`$$group'."; \
+ fi; \
+ ${ECHO_CMD} "@exec if ! ${PW} groupshow $$group >/dev/null 2>&1; then ${PW} groupadd $$group -g $$gid; fi" >> ${TMPPLIST}; \
+ done
+.endfor
+.endif
+.if defined(USERS)
+.for _file in ${UID_FILES}
+.if !exists(${_file})
+ @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
+.endif
+.endfor
+.for _user in ${USERS}
+# _bgpd:*:130:130:BGP Daemon:/var/empty:/sbin/nologin
+ @if ! ${GREP} -h ^${_user}: ${UID_FILES} >/dev/null 2>&1; then \
+ ${ECHO_CMD} "** Cannot find any information about user \`${_user}' in ${UID_FILES}."; \
+ exit 1; \
+ fi
+ @IFS=":"; ${GREP} -h ^${_user}: ${UID_FILES} | head -n 1 | while read login passwd uid gid class change expire gecos homedir shell; do \
+ uid=$$(($$uid+${UID_OFFSET})); \
+ gid=$$(($$gid+${GID_OFFSET})); \
+ class="$${class:+-L }$$class"; \
+ homedir=$$(echo $$homedir | sed "s|^/usr/local|${PREFIX}|"); \
+ if ! ${PW} usershow $$login >/dev/null 2>&1; then \
+ ${ECHO_MSG} "Creating user \`$$login' with uid \`$$uid'."; \
+ eval ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \
+ case $$homedir in /nonexistent|/var/empty) ;; *) ${INSTALL} -d -g $$gid -o $$uid $$homedir;; esac; \
+ else \
+ ${ECHO_MSG} "Using existing user \`$$login'."; \
+ fi; \
+ ${ECHO_CMD} "@exec if ! ${PW} usershow $$login >/dev/null 2>&1; then ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; fi" >> ${TMPPLIST}; \
+ case $$homedir in /nonexistent|/var/empty) ;; *) ${ECHO_CMD} "@exec ${INSTALL} -d -g $$gid -o $$uid $$homedir" >> ${TMPPLIST};; esac; \
+ done
+.endfor
+.if defined(GROUPS)
+.for _group in ${GROUPS}
+# _bgpd:*:130:
+ @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
+ gid=$$(($$gid+${GID_OFFSET})); \
+ IFS=","; for _login in $$members; do \
+ list=`${PW} usershow $${_login} -P | ${SED} -ne 's/.*Groups: //p'`; \
+ ${ECHO_MSG} "Setting \`$${_login}' groups to \`$$list$${list:+,}${_group}'."; \
+ ${PW} usermod $${_login} -G $$list$${list:+,}${_group}; \
+ ${ECHO_CMD} "@exec list=\`${PW} usershow $${_login} -P | ${SED} -ne 's/.*Groups: //p'\`; ${PW} usermod $${_login} -G \$${list},${_group}" >> ${TMPPLIST}; \
+ done; \
+ done
+.endfor
+.endif
+.endif
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !defined(DISABLE_SECURITY_CHECK)
+.if !target(security-check)
+.if !defined(OLD_SECURITY_CHECK)
+
+security-check:
+# Scan PLIST for:
+# 1. setugid files
+# 2. accept()/recvfrom() which indicates network listening capability
+# 3. insecure functions (gets/mktemp/tempnam/[XXX])
+# 4. startup scripts, in conjunction with 2.
+# 5. world-writable files/dirs
+#
+ -@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable ${WRKDIR}/.PLIST.objdump; \
+ ${AWK} -v prefix='${PREFIX}' ' \
+ match($$0, /^@cwd /) { prefix = substr($$0, RSTART + RLENGTH); if (prefix == "/") prefix=""; next; } \
+ /^@/ { next; } \
+ /^\// { print; next; } \
+ { print prefix "/" $$0; } \
+ ' ${TMPPLIST} > ${WRKDIR}/.PLIST.flattened; \
+ ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
+ | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2> /dev/null > ${WRKDIR}/.PLIST.setuid; \
+ ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
+ | ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \
+ ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
+ | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \
+ | ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \
+ if \
+ ! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \
+ ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \
+ then \
+ www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \
+ if [ ! -z "$${www_site}" ]; then \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} " For more information, and contact details about the security"; \
+ ${ECHO_MSG} " status of this software, see the following webpage: "; \
+ ${ECHO_MSG} "$${www_site}"; \
+ fi; \
+ fi
+
+
+.else # i.e. defined(OLD_SECURITY_CHECK)
+
+security-check:
+# Scan PLIST for:
+# 1. setugid files
+# 2. accept()/recvfrom() which indicates network listening capability
+# 3. insecure functions (gets/mktemp/tempnam/[XXX])
+# 4. startup scripts, in conjunction with 2.
+# 5. world-writable files/dirs
+#
+ -@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.stupid \
+ ${WRKDIR}/.PLIST.network ${WRKDIR}/.PLIST.writable; \
+ if [ -n "$$PORTS_AUDIT" ]; then \
+ stupid_functions_regexp=' (gets|mktemp|tempnam|tmpnam|strcpy|strcat|sprintf)$$'; \
+ else \
+ stupid_functions_regexp=' (gets|mktemp|tempnam|tmpnam)$$'; \
+ fi; \
+ for i in `${GREP} -v '^@' ${TMPPLIST}`; do \
+ if [ ! -L "${PREFIX}/$$i" -a -f "${PREFIX}/$$i" ]; then \
+ ${OBJDUMP} -R ${PREFIX}/$$i > \
+ ${WRKDIR}/.PLIST.objdump 2> /dev/null; \
+ if [ -s ${WRKDIR}/.PLIST.objdump ] ; then \
+ ${EGREP} " $$stupid_functions_regexp" \
+ ${WRKDIR}/.PLIST.objdump | ${AWK} '{print " " $$3}' | ${TR} -d '\n' \
+ > ${WRKDIR}/.PLIST.stupid; \
+ if [ -n "`${EGREP} ' (accept|recvfrom)$$' ${WRKDIR}/.PLIST.objdump`" ] ; then \
+ if [ -s ${WRKDIR}/.PLIST.stupid ]; then \
+ ${ECHO_CMD} -n "${PREFIX}/$$i (USES POSSIBLY INSECURE FUNCTIONS:" >> ${WRKDIR}/.PLIST.network; \
+ ${CAT} ${WRKDIR}/.PLIST.stupid >> ${WRKDIR}/.PLIST.network; \
+ ${ECHO_CMD} ")" >> ${WRKDIR}/.PLIST.network; \
+ else \
+ ${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.network; \
+ fi; \
+ fi; \
+ fi; \
+ if [ -n "`${FIND} ${PREFIX}/$$i -prune \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2>/dev/null`" ]; then \
+ if [ -s ${WRKDIR}/.PLIST.stupid ]; then \
+ ${ECHO_CMD} -n "${PREFIX}/$$i (USES POSSIBLY INSECURE FUNCTIONS:" >> ${WRKDIR}/.PLIST.setuid; \
+ ${CAT} ${WRKDIR}/.PLIST.stupid >> ${WRKDIR}/.PLIST.setuid; \
+ ${ECHO_CMD} ")" >> ${WRKDIR}/.PLIST.setuid; \
+ else \
+ ${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.setuid; \
+ fi; \
+ fi; \
+ fi; \
+ if [ ! -L "${PREFIX}/$$i" ]; then \
+ if [ -n "`${FIND} ${PREFIX}/$$i -prune -perm -0002 \! -type l 2>/dev/null`" ]; then \
+ ${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.writable; \
+ fi; \
+ fi; \
+ done; \
+ ${GREP} '^etc/rc.d/' ${TMPPLIST} > ${WRKDIR}/.PLIST.startup; \
+ if [ -s ${WRKDIR}/.PLIST.setuid -o -s ${WRKDIR}/.PLIST.network -o -s ${WRKDIR}/.PLIST.writable ]; then \
+ if [ -n "$$PORTS_AUDIT" ]; then \
+ ${ECHO_MSG} "===> SECURITY REPORT (PARANOID MODE): "; \
+ else \
+ ${ECHO_MSG} "===> SECURITY REPORT: "; \
+ fi; \
+ if [ -s ${WRKDIR}/.PLIST.setuid ] ; then \
+ ${ECHO_MSG} " This port has installed the following binaries,"; \
+ ${ECHO_MSG} " which execute with increased privileges."; \
+ ${CAT} ${WRKDIR}/.PLIST.setuid; \
+ ${ECHO_MSG}; \
+ fi; \
+ if [ -s ${WRKDIR}/.PLIST.network ] ; then \
+ ${ECHO_MSG} " This port has installed the following files, which may act as network"; \
+ ${ECHO_MSG} " servers and may therefore pose a remote security risk to the system."; \
+ ${CAT} ${WRKDIR}/.PLIST.network; \
+ ${ECHO_MSG}; \
+ if [ -s ${WRKDIR}/.PLIST.startup ] ; then \
+ ${ECHO_MSG} " This port has installed the following startup scripts,"; \
+ ${ECHO_MSG} " which may cause these network services to be started at boot time."; \
+ ${SED} s,^,${PREFIX}/, < ${WRKDIR}/.PLIST.startup; \
+ ${ECHO_MSG}; \
+ fi; \
+ fi; \
+ if [ -s ${WRKDIR}/.PLIST.writable ] ; then \
+ ${ECHO_MSG} " This port has installed the following world-writable files/directories."; \
+ ${CAT} ${WRKDIR}/.PLIST.writable; \
+ ${ECHO_MSG}; \
+ fi; \
+ ${ECHO_MSG} " If there are vulnerabilities in these programs there may be a security"; \
+ ${ECHO_MSG} " risk to the system. The FreeBSD Project makes no guarantee about the"; \
+ ${ECHO_MSG} " security of ports included in the Ports Collection."; \
+ ${ECHO_MSG} " Please type 'make deinstall' to deinstall the port if this is a concern."; \
+ www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \
+ if [ ! -z "$${www_site}" ]; then \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} " For more information, and contact details about the security"; \
+ ${ECHO_MSG} " status of this software, see the following webpage: "; \
+ ${ECHO_MSG} "$${www_site}"; \
+ fi; \
+ fi
+.endif # !defined(OLD_SECURITY_CHECK)
+.endif
+.else # i.e. defined(DISABLE_SECURITY_CHECK)
+security-check:
+ @${ECHO_MSG} " WARNING: Security check has been disabled."
+.endif # !defined(DISABLE_SECURITY_CHECK)
+
+################################################################
+# Skeleton targets start here
+#
+# You shouldn't have to change these. Either add the pre-* or
+# post-* targets/scripts or redefine the do-* targets. These
+# targets don't do anything other than checking for cookies and
+# call the necessary targets/scripts.
+################################################################
+
+# Please note that the order of the following targets is important, and
+# should not be modified.
+
+.if defined(CHROOTED)
+_CHROOT_SEQ= post-chroot
+.else
+_CHROOT_SEQ=
+.endif
+_SANITY_SEQ= ${_CHROOT_SEQ} pre-everything check-makefile \
+ check-categories check-makevars check-desktop-entries \
+ check-conflicts check-depends check-deprecated \
+ check-vulnerable buildanyway-message options-message
+_FETCH_DEP= check-sanity
+_FETCH_SEQ= fetch-depends pre-fetch pre-fetch-script \
+ do-fetch post-fetch post-fetch-script
+_EXTRACT_DEP= fetch
+_EXTRACT_SEQ= extract-message checksum extract-depends pre-extract \
+ pre-extract-script do-extract \
+ post-extract post-extract-script
+_PATCH_DEP= extract
+_PATCH_SEQ= patch-message patch-depends patch-dos2unix pre-patch \
+ pre-patch-script do-patch post-patch post-patch-script
+_CONFIGURE_DEP= patch
+_CONFIGURE_SEQ= build-depends lib-depends configure-message \
+ pre-configure pre-configure-script \
+ run-autotools do-configure post-configure post-configure-script
+_BUILD_DEP= configure
+_BUILD_SEQ= build-message pre-build pre-build-script do-build \
+ post-build post-build-script
+_INSTALL_DEP= build
+_INSTALL_SEQ= install-message run-depends lib-depends apply-slist pre-install \
+ pre-install-script generate-plist check-already-installed
+_INSTALL_SUSEQ= check-umask install-mtree pre-su-install \
+ pre-su-install-script create-users-groups do-install \
+ install-desktop-entries post-install post-install-script \
+ add-plist-info add-plist-docs add-plist-examples add-plist-data \
+ add-plist-post install-rc-script compress-man \
+ install-ldconfig-file fake-pkg security-check
+_PACKAGE_DEP= install
+_PACKAGE_SEQ= package-message pre-package pre-package-script \
+ do-package post-package-script
+
+.if !target(post-chroot)
+post-chroot:
+ @${DO_NADA}
+.endif
+
+.if !target(check-sanity)
+check-sanity: ${_SANITY_SEQ}
+.endif
+
+# XXX MCL might need to move in loop below?
+.if !target(fetch)
+fetch: ${_FETCH_DEP} ${_FETCH_SEQ}
+.endif
+
+# Main logic. The loop generates 6 main targets and using cookies
+# ensures that those already completed are skipped.
+
+.for target in extract patch configure build install package
+
+.if !target(${target}) && defined(_OPTIONS_OK)
+${target}: ${${target:U}_COOKIE}
+.elif !target(${target})
+${target}: config-conditional
+ @cd ${.CURDIR} && ${MAKE} CONFIG_DONE_${UNIQUENAME:U}=1 ${__softMAKEFLAGS} ${${target:U}_COOKIE}
+.elif target(${target}) && defined(IGNORE)
+.endif
+
+.if !exists(${${target:U}_COOKIE})
+
+.if ${UID} != 0 && defined(_${target:U}_SUSEQ) && !defined(INSTALL_AS_USER)
+.if defined(USE_SUBMAKE)
+${${target:U}_COOKIE}: ${_${target:U}_DEP}
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SEQ}
+.else
+${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ}
+.endif
+ @${ECHO_MSG} "===> Switching to root credentials for '${target}' target"
+ @cd ${.CURDIR} && \
+ ${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SUSEQ}"
+ @${ECHO_MSG} "===> Returning to user credentials"
+ @${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
+.elif defined(USE_SUBMAKE)
+${${target:U}_COOKIE}: ${_${target:U}_DEP}
+ @cd ${.CURDIR} && \
+ ${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ}
+ @${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
+.else
+${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ}
+ @${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
+.endif
+
+.else
+${${target:U}_COOKIE}::
+ @if [ -e ${.TARGET} ]; then \
+ ${DO_NADA}; \
+ else \
+ cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.TARGET}; \
+ fi
+.endif
+
+.endfor
+
+# Enforce order for -jN builds
+
+.ORDER: ${_SANITY_SEQ}
+.ORDER: ${_FETCH_DEP} ${_FETCH_SEQ}
+.ORDER: ${_EXTRACT_DEP} ${_EXTRACT_SEQ}
+.ORDER: ${_PATCH_DEP} ${_PATCH_SEQ}
+.ORDER: ${_CONFIGURE_DEP} ${_CONFIGURE_SEQ}
+.ORDER: ${_BUILD_DEP} ${_BUILD_SEQ}
+.ORDER: ${_INSTALL_DEP} ${_INSTALL_SEQ}
+.ORDER: ${_PACKAGE_DEP} ${_PACKAGE_SEQ}
+
+extract-message:
+ @${ECHO_MSG} "===> Extracting for ${PKGNAME}"
+patch-message:
+ @${ECHO_MSG} "===> Patching for ${PKGNAME}"
+configure-message:
+ @${ECHO_MSG} "===> Configuring for ${PKGNAME}"
+build-message:
+ @${ECHO_MSG} "===> Building for ${PKGNAME}"
+install-message:
+ @${ECHO_MSG} "===> Installing for ${PKGNAME}"
+package-message:
+ @${ECHO_MSG} "===> Building package for ${PKGNAME}"
+
+# Empty pre-* and post-* targets
+
+.for stage in pre post
+.for name in check-sanity fetch extract patch configure build install package
+
+.if !target(${stage}-${name})
+${stage}-${name}:
+ @${DO_NADA}
+.endif
+
+.if !target(${stage}-${name}-script)
+${stage}-${name}-script:
+ @if [ -f ${SCRIPTDIR}/${.TARGET:S/-script$//} ]; then \
+ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
+ ${SCRIPTDIR}/${.TARGET:S/-script$//}; \
+ fi
+.endif
+
+.endfor
+.endfor
+
+# Special cases for su
+.if !target(pre-su-install)
+pre-su-install:
+ @${DO_NADA}
+.endif
+
+.if !target(pre-su-install-script)
+pre-su-install-script:
+ @${DO_NADA}
+.endif
+
+
+.if !target(pretty-print-www-site)
+pretty-print-www-site:
+ @www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \
+ if [ -n "$${www_site}" ]; then \
+ ${ECHO_MSG} -n " and/or visit the "; \
+ ${ECHO_MSG} -n "<a href=\"$${www_site}\">web site</a>"; \
+ ${ECHO_MSG} " for futher informations"; \
+ fi
+.endif
+
+################################################################
+# Some more targets supplied for users' convenience
+################################################################
+
+# Checkpatch
+#
+# Special target to verify patches
+
+.if !target(checkpatch)
+checkpatch:
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_SEQ}
+.endif
+
+# Reinstall
+#
+# Special target to re-run install
+
+.if !target(reinstall)
+reinstall:
+ @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
+ @cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} install
+.endif
+
+# Deinstall
+#
+# Special target to remove installation
+
+.if !target(deinstall)
+deinstall:
+.if ${UID} != 0 && !defined(INSTALL_AS_USER)
+ @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target"
+ @cd ${.CURDIR} && \
+ ${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${.TARGET}"
+ @${ECHO_MSG} "===> Returning to user credentials"
+.else
+ @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}"
+ @found_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
+ for p in $${found_names}; do \
+ check_name=`${ECHO_CMD} $${p} | ${SED} -e 's/-[^-]*$$//'`; \
+ if [ "$${check_name}" = "${PKGBASE}" ]; then \
+ prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
+ if [ "x${PREFIX}" = "x$${prfx}" ]; then \
+ ${ECHO_MSG} "===> Deinstalling $${p}"; \
+ ${PKG_DELETE} -f $${p}; \
+ else \
+ ${ECHO_MSG} "===> $${p} has a different PREFIX: $${prfx}, skipping"; \
+ fi; \
+ fi; \
+ done; \
+ if [ -z "$${found_names}" ]; then \
+ ${ECHO_MSG} "===> ${PKGBASE} not installed, skipping"; \
+ fi
+ @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
+.endif
+.endif
+
+# Deinstall-all
+#
+# Special target to remove installation of all ports of the same origin
+
+.if !target(deinstall-all)
+deinstall-all:
+.if ${UID} != 0 && !defined(INSTALL_AS_USER)
+ @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target"
+ @cd ${.CURDIR} && \
+ ${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${.TARGET}"
+ @${ECHO_MSG} "===> Returning to user credentials"
+.else
+ @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}"
+ @deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
+ for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \
+ deinstall_names="$${deinstall_names} $$(${PKG_INFO} -q -O $${oldpkgorigin})"; \
+ done; \
+ if [ -n "$${deinstall_names}" ]; then \
+ for d in $${deinstall_names}; do \
+ ${ECHO_MSG} "===> Deinstalling $${d}"; \
+ ${PKG_DELETE} -f $${d}; \
+ done; \
+ else \
+ ${ECHO_MSG} "===> ${PKGORIGIN} not installed, skipping"; \
+ fi; \
+ ${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
+.endif
+.endif
+
+# Cleaning up
+
+.if !target(do-clean)
+do-clean:
+ @if [ -d ${WRKDIR} ]; then \
+ if [ -w ${WRKDIR} ]; then \
+ ${RM} -rf ${WRKDIR}; \
+ else \
+ ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
+ fi; \
+ fi
+.endif
+
+.if !target(clean)
+clean:
+.if !defined(NOCLEANDEPENDS)
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} limited-clean-depends
+.endif
+ @${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
+.if target(pre-clean)
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pre-clean
+.endif
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} do-clean
+.if target(post-clean)
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} post-clean
+.endif
+.endif
+
+.if !target(pre-distclean)
+pre-distclean:
+ @${DO_NADA}
+.endif
+
+.if !target(distclean)
+distclean: pre-distclean clean
+ @cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES} ${_PATCHFILES}"
+.endif
+
+.if !target(delete-distfiles)
+delete-distfiles:
+ @${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}"
+ @(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \
+ cd ${_DISTDIR}; \
+ for file in ${RESTRICTED_FILES}; do \
+ ${RM} -f $${file}; \
+ dir=$${file%/*}; \
+ if [ "$${dir}" != "$${file}" ]; then \
+ ${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \
+ fi; \
+ done; \
+ fi)
+.if defined(DIST_SUBDIR)
+ -@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE}
+.endif
+.endif
+
+.if !target(delete-distfiles-list)
+delete-distfiles-list:
+ @${ECHO_CMD} "# ${PKGNAME}"
+ @if [ "X${RESTRICTED_FILES}" != "X" ]; then \
+ for file in ${RESTRICTED_FILES}; do \
+ ${ECHO_CMD} "[ -f ${_DISTDIR}/$$file ] && (${ECHO_CMD} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \
+ dir=$${file%/*}; \
+ if [ "$${dir}" != "$${file}" ]; then \
+ ${ECHO_CMD} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \
+ fi; \
+ done; \
+ fi
+.if defined(DIST_SUBDIR)
+ @${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}"
+.endif
+.endif
+
+# Prints out a list of files to fetch (useful to do a batch fetch)
+
+.if !target(fetch-list)
+fetch-list:
+ @${MKDIR} ${_DISTDIR}
+ @(cd ${_DISTDIR}; \
+ ${_MASTER_SITES_ENV} ; \
+ for _file in ${DISTFILES}; do \
+ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
+ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+ if [ ! -f $$file -a ! -f $${file##*/} ]; then \
+ if [ ! -z "$$select" ] ; then \
+ __MASTER_SITES_TMP= ; \
+ for group in $$select; do \
+ if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
+ eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
+ __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
+ fi; \
+ done; \
+ ___MASTER_SITES_TMP= ; \
+ SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+ else \
+ SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
+ fi; \
+ for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+ if [ ! -z "`${ECHO_CMD} ${NOFETCHFILES} | ${GREP} -w $${file}`" ]; then \
+ if [ -z "`${ECHO_CMD} ${MASTER_SITE_OVERRIDE} | ${GREP} -w $${site}`" ]; then \
+ continue; \
+ fi; \
+ fi; \
+ DIR=${DIST_SUBDIR};\
+ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+ case $${file} in \
+ */*) args="-o $${file} $${site}$${file}";; \
+ *) args=$${site}$${file};; \
+ esac; \
+ ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
+ done; \
+ ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
+ fi; \
+ done)
+.if defined(PATCHFILES)
+ @(cd ${_DISTDIR}; \
+ ${_PATCH_SITES_ENV} ; \
+ for _file in ${PATCHFILES}; do \
+ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
+ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+ if [ ! -f $$file -a ! -f $${file##*/} ]; then \
+ if [ ! -z "$$select" ] ; then \
+ __PATCH_SITES_TMP= ; \
+ for group in $$select; do \
+ if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
+ eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
+ __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
+ fi; \
+ done; \
+ ___PATCH_SITES_TMP= ; \
+ SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+ else \
+ SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
+ fi; \
+ for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+ case $${file} in \
+ */*) args="-o $${file} $${site}$${file}";; \
+ *) args=$${site}$${file};; \
+ esac; \
+ ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
+ done; \
+ ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
+ fi; \
+ done)
+.endif
+.endif
+
+.if !target(fetch-url-list-int)
+fetch-url-list-int:
+ @${MKDIR} ${_DISTDIR}
+ @(cd ${_DISTDIR}; \
+ ${_MASTER_SITES_ENV}; \
+ for _file in ${DISTFILES}; do \
+ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
+ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+ if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
+ if [ ! -z "$$select" ] ; then \
+ __MASTER_SITES_TMP= ; \
+ for group in $$select; do \
+ if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
+ eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
+ __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
+ fi \
+ done; \
+ ___MASTER_SITES_TMP= ; \
+ SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+ else \
+ SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
+ fi ; \
+ for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+ DIR=${DIST_SUBDIR}; \
+ CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
+ case $${file} in \
+ */*) args="-o $${file} $${site}$${file}";; \
+ *) args=$${site}$${file};; \
+ esac; \
+ ${ECHO_CMD} $${args} ; \
+ done; \
+ fi \
+ done)
+.if defined(PATCHFILES)
+ @(cd ${_DISTDIR}; \
+ ${_PATCH_SITES_ENV} ; \
+ for _file in ${PATCHFILES}; do \
+ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
+ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+ if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
+ if [ ! -z "$$select" ] ; then \
+ __PATCH_SITES_TMP= ; \
+ for group in $$select; do \
+ if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
+ eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
+ __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
+ fi \
+ done; \
+ ___PATCH_SITES_TMP= ; \
+ SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+ else \
+ SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
+ fi ; \
+ for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+ DIR=${DIST_SUBDIR}; \
+ CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
+ case $${file} in \
+ */*) args="-o $${file} $${site}$${file}";; \
+ *) args=$${site}$${file};; \
+ esac; \
+ ${ECHO_CMD} $${args} ; \
+ done; \
+ fi \
+ done)
+.endif
+.endif
+
+.if !target(fetch-urlall-list)
+fetch-urlall-list:
+ @LISTALL=yes ${MAKE} fetch-url-list-int
+.endif
+
+.if !target(fetch-url-list)
+fetch-url-list:
+ @${MAKE} fetch-url-list-int
+.endif
+
+# Generates patches.
+
+update-patches:
+ @toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \
+ PATCHDIR=${PATCHDIR} \
+ PATCH_LIST=${PATCHDIR}/patch-* \
+ DIFF_ARGS=${DIFF_ARGS} \
+ DISTORIG=${DISTORIG} \
+ ${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \
+ case $$toedit in "");; \
+ *) ${ECHO_CMD} -n 'edit patches: '; read i; \
+ cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac
+
+# Checksumming utilities
+
+check-checksum-algorithms:
+ @ \
+ ${checksum_init} \
+ \
+ for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+ eval alg_executable=\$$$$alg; \
+ if [ -z "$$alg_executable" ]; then \
+ ${ECHO_MSG} "Checksum algorithm $$alg: Couldn't find the executable."; \
+ ${ECHO_MSG} "Set $$alg=/path/to/$$alg in /etc/make.conf and try again."; \
+ exit 1; \
+ fi; \
+ done; \
+
+checksum_init=\
+ SHA256=${SHA256}; \
+ MD5=${MD5};
+
+.if !target(makesum)
+makesum: check-checksum-algorithms
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch NO_CHECKSUM=yes \
+ DISABLE_SIZE=yes
+ @if [ -f ${MD5_FILE} ]; then ${CAT} /dev/null > ${MD5_FILE}; fi
+ @( \
+ cd ${DISTDIR}; \
+ \
+ ${checksum_init} \
+ \
+ for file in ${_CKSUMFILES}; do \
+ for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+ eval alg_executable=\$$$$alg; \
+ \
+ if [ $$alg_executable != "NO" ]; then \
+ $$alg_executable $$file >> ${MD5_FILE}; \
+ fi; \
+ done; \
+ if [ -z "${NO_SIZE}" ]; then \
+ ${ECHO_CMD} "SIZE ($$file) = "`${LS} -ALln $$file | ${AWK} '{print $$5}'` >> ${MD5_FILE}; \
+ fi; \
+ done \
+ )
+ @for file in ${_IGNOREFILES}; do \
+ for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+ ${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${MD5_FILE}; \
+ done; \
+ done
+.endif
+
+.if !target(checksum)
+checksum: fetch check-checksum-algorithms
+ @${checksum_init} \
+ if [ -f ${MD5_FILE} ]; then \
+ cd ${DISTDIR}; OK="";\
+ for file in ${_CKSUMFILES}; do \
+ ignored="true"; \
+ _file=$${file#${DIST_SUBDIR}/*}; \
+ for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+ ignore="false"; \
+ eval alg_executable=\$$$$alg; \
+ \
+ if [ $$alg_executable != "NO" ]; then \
+ MKSUM=`$$alg_executable < $$file`; \
+ CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
+ else \
+ ignore="true"; \
+ fi; \
+ \
+ if [ $$ignore = "false" -a -z "$$CKSUM" ]; then \
+ ${ECHO_MSG} "=> No $$alg checksum recorded for $$file."; \
+ ignore="true"; \
+ fi; \
+ \
+ if [ "$$CKSUM" = "IGNORE" ]; then \
+ ${ECHO_MSG} "=> $$alg Checksum for $$file is set to IGNORE in distinfo file even though"; \
+ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
+ ignore="true"; \
+ OK=${FALSE}; \
+ fi; \
+ \
+ if [ $$ignore = "false" ]; then \
+ match="false"; \
+ for chksum in $$CKSUM; do \
+ if [ "$$chksum" = "$$MKSUM" ]; then \
+ match="true"; \
+ break; \
+ fi; \
+ done; \
+ if [ $$match = "true" ]; then \
+ ${ECHO_MSG} "=> $$alg Checksum OK for $$file."; \
+ ignored="false"; \
+ else \
+ ${ECHO_MSG} "=> $$alg Checksum mismatch for $$file."; \
+ refetchlist="$$refetchlist$$file "; \
+ OK="$${OK:-retry}"; \
+ ignored="false"; \
+ fi; \
+ fi; \
+ done; \
+ \
+ if [ $$ignored = "true" ]; then \
+ ${ECHO_MSG} "=> No suitable checksum found for $$file."; \
+ OK="${FALSE}"; \
+ fi; \
+ \
+ done; \
+ \
+ for file in ${_IGNOREFILES}; do \
+ _file=$${file#${DIST_SUBDIR}/*}; \
+ ignored="true"; \
+ alreadymatched="false"; \
+ for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+ ignore="false"; \
+ eval alg_executable=\$$$$alg; \
+ \
+ if [ $$alg_executable != "NO" ]; then \
+ CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
+ else \
+ ignore="true"; \
+ fi; \
+ \
+ if [ $$ignore = "false" ]; then \
+ if [ -z "$$CKSUM" ]; then \
+ ${ECHO_MSG} "=> No $$alg checksum for $$file recorded (expected IGNORE)"; \
+ OK="$$alreadymatched"; \
+ elif [ $$CKSUM != "IGNORE" ]; then \
+ ${ECHO_MSG} "=> $$alg Checksum for $$file is not set to IGNORE in distinfo file even though"; \
+ ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
+ OK="false"; \
+ else \
+ ignored="false"; \
+ alreadymatched="true"; \
+ fi; \
+ fi; \
+ done; \
+ \
+ if ( [ $$ignored = "true" ]) ; then \
+ ${ECHO_MSG} "=> No suitable checksum found for $$file."; \
+ OK="false"; \
+ fi; \
+ \
+ done; \
+ \
+ if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \
+ ${ECHO_MSG} "===> Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \
+ if ( cd ${.CURDIR} && \
+ ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \
+ if ( cd ${.CURDIR} && \
+ ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \
+ OK="true"; \
+ fi; \
+ fi; \
+ fi; \
+ \
+ if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \
+ ${ECHO_MSG} "===> Giving up on fetching files: $$refetchlist"; \
+ ${ECHO_MSG} "Make sure the Makefile and distinfo file (${MD5_FILE})"; \
+ ${ECHO_MSG} "are up to date. If you are absolutely sure you want to override this"; \
+ ${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \
+ exit 1; \
+ fi; \
+ if [ "$$OK" != "true" ]; then \
+ exit 1; \
+ fi; \
+ elif [ -n "${_CKSUMFILES:M*}" ]; then \
+ ${ECHO_MSG} "=> No checksum file (${MD5_FILE})."; \
+ fi
+.endif
+
+################################################################
+# The special package-building targets
+# You probably won't need to touch these
+################################################################
+
+# Nobody should want to override this unless PKGNAME is simply bogus.
+
+.if !target(package-name)
+package-name:
+ @${ECHO_CMD} ${PKGNAME}
+.endif
+
+# Build a package but don't check the package cookie
+
+.if !target(repackage)
+repackage: pre-repackage package
+
+pre-repackage:
+ @${RM} -f ${PACKAGE_COOKIE}
+.endif
+
+# Build a package but don't check the cookie for installation, also don't
+# install package cookie
+
+.if !target(package-noinstall)
+package-noinstall:
+ @${MKDIR} ${WRKDIR}
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pre-package \
+ pre-package-script do-package post-package-script
+ @${RM} -f ${TMPPLIST}
+ -@${RMDIR} ${WRKDIR}
+.endif
+
+################################################################
+# Dependency checking
+################################################################
+
+.if !target(depends)
+depends: extract-depends patch-depends lib-depends fetch-depends build-depends run-depends
+
+.if defined(ALWAYS_BUILD_DEPENDS)
+_DEPEND_ALWAYS= 1
+.else
+_DEPEND_ALWAYS= 0
+.endif
+
+_INSTALL_DEPENDS= \
+ if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \
+ subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \
+ if [ -r "$${subpkgfile}" -a "$$target" = "${DEPENDS_TARGET}" ]; then \
+ ${ECHO_MSG} "===> Installing existing package $${subpkgfile}"; \
+ ${PKG_ADD} $${subpkgfile}; \
+ else \
+ (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
+ fi; \
+ else \
+ (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
+ fi; \
+ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}";
+
+.for deptype in EXTRACT PATCH FETCH BUILD RUN
+${deptype:L}-depends:
+.if defined(${deptype}_DEPENDS)
+.if !defined(NO_DEPENDS)
+ @for i in `${ECHO_CMD} "${${deptype}_DEPENDS}"`; do \
+ prog=`${ECHO_CMD} $$i | ${SED} -e 's/:.*//'`; \
+ if [ -z "$$prog" ]; then \
+ ${ECHO_MSG} "Error: there is an empty port dependency in ${deptype}_DEPENDS."; \
+ break; \
+ fi; \
+ dir=`${ECHO_CMD} $$i | ${SED} -e 's/[^:]*://'`; \
+ if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
+ target=`${ECHO_CMD} $$dir | ${SED} -e 's/.*://'`; \
+ dir=`${ECHO_CMD} $$dir | ${SED} -e 's/:.*//'`; \
+ if [ X${DEPENDS_PRECLEAN} != "X" ]; then \
+ target="clean $$target"; \
+ depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
+ fi; \
+ if [ X${DEPENDS_CLEAN} != "X" ]; then \
+ target="$$target clean"; \
+ depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
+ fi; \
+ else \
+ target="${DEPENDS_TARGET}"; \
+ depends_args="${DEPENDS_ARGS}"; \
+ fi; \
+ if ${EXPR} "$$prog" : \\/ >/dev/null; then \
+ if [ -e "$$prog" ]; then \
+ if [ "$$prog" = "${NONEXISTENT}" ]; then \
+ ${ECHO_MSG} "Error: ${NONEXISTENT} exists. Please remove it, and restart the build."; \
+ ${FALSE}; \
+ else \
+ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
+ if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+ ${ECHO_MSG} " (but building it anyway)"; \
+ notfound=1; \
+ else \
+ notfound=0; \
+ fi; \
+ fi; \
+ else \
+ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
+ notfound=1; \
+ fi; \
+ else \
+ case $${prog} in \
+ *\>*|*\<*|*=*) pkg=yes;; \
+ *) pkg="";; \
+ esac; \
+ if [ "$$pkg" != "" ]; then \
+ if ${PKG_INFO} "$$prog" > /dev/null 2>&1 ; then \
+ ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - found"; \
+ if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+ ${ECHO_MSG} " (but building it anyway)"; \
+ notfound=1; \
+ else \
+ notfound=0; \
+ fi; \
+ else \
+ ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - not found"; \
+ notfound=1; \
+ fi; \
+ if [ $$notfound != 0 ]; then \
+ inverse_dep=`${ECHO_CMD} $$prog | ${SED} \
+ -e 's/<=/=gt=/; s/</=ge=/; s/>=/=lt=/; s/>/=le=/' \
+ -e 's/=gt=/>/; s/=ge=/>=/; s/=lt=/</; s/=le=/<=/'`; \
+ pkg_info=`${PKG_INFO} -E "$$inverse_dep" || ${TRUE}`; \
+ if [ "$$pkg_info" != "" ]; then \
+ ${ECHO_MSG} "===> Found $$pkg_info, but you need to upgrade to $$prog."; \
+ exit 1; \
+ fi; \
+ fi; \
+ elif ${WHICH} "$$prog" > /dev/null 2>&1 ; then \
+ ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
+ if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+ ${ECHO_MSG} " (but building it anyway)"; \
+ notfound=1; \
+ else \
+ notfound=0; \
+ fi; \
+ else \
+ ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
+ notfound=1; \
+ fi; \
+ fi; \
+ if [ $$notfound != 0 ]; then \
+ ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
+ if [ ! -d "$$dir" ]; then \
+ ${ECHO_MSG} " => No directory for $$prog. Skipping.."; \
+ else \
+ ${_INSTALL_DEPENDS} \
+ fi; \
+ fi; \
+ done
+.endif
+.else
+ @${DO_NADA}
+.endif
+.endfor
+
+lib-depends:
+.if defined(LIB_DEPENDS) && !defined(NO_DEPENDS)
+ @for i in ${LIB_DEPENDS}; do \
+ lib=$${i%%:*}; \
+ pattern="`${ECHO_CMD} $$lib | ${SED} -E -e 's/\./\\\\./g' -e 's/(\\\\)?\+/\\\\+/g'`"\
+ dir=$${i#*:}; \
+ target=$${i##*:}; \
+ if ${TEST} $$dir = $$target; then \
+ target="${DEPENDS_TARGET}"; \
+ depends_args="${DEPENDS_ARGS}"; \
+ else \
+ dir=$${dir%%:*}; \
+ fi; \
+ ${ECHO_MSG} -n "===> ${PKGNAME} depends on shared library: $$lib"; \
+ if ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
+ ${ECHO_MSG} " - found"; \
+ if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+ ${ECHO_MSG} " (but building it anyway)"; \
+ notfound=1; \
+ else \
+ notfound=0; \
+ fi; \
+ else \
+ ${ECHO_MSG} " - not found"; \
+ notfound=1; \
+ fi; \
+ if [ $$notfound != 0 ]; then \
+ ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
+ if [ ! -d "$$dir" ]; then \
+ ${ECHO_MSG} " => No directory for $$lib. Skipping.."; \
+ else \
+ ${_INSTALL_DEPENDS} \
+ if ! ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
+ ${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \
+ ${FALSE}; \
+ fi; \
+ fi; \
+ fi; \
+ done
+.endif
+
+.endif
+
+# Dependency lists: both build and runtime, recursive. Print out directory names.
+
+_UNIFIED_DEPENDS=${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}
+_DEPEND_DIRS= ${_UNIFIED_DEPENDS:C,^[^:]*:([^:]*).*$,\1,}
+
+all-depends-list:
+ @${ALL-DEPENDS-LIST}
+
+ALL-DEPENDS-LIST= \
+ L="${_DEPEND_DIRS}"; \
+ checked=""; \
+ while [ -n "$$L" ]; do \
+ l=""; \
+ for d in $$L; do \
+ case $$checked in \
+ $$d\ *|*\ $$d\ *|*\ $$d) \
+ continue;; \
+ esac; \
+ checked="$$checked $$d"; \
+ if [ ! -d $$d ]; then \
+ ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
+ continue; \
+ fi; \
+ ${ECHO_CMD} $$d; \
+ if ! children=$$(cd $$d && ${MAKE} -V _DEPEND_DIRS); then\
+ ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
+ continue; \
+ fi; \
+ for child in $$children; do \
+ case "$$checked $$l" in \
+ $$child\ *|*\ $$child\ *|*\ $$child) \
+ continue;; \
+ esac; \
+ l="$$l $$child"; \
+ done; \
+ done; \
+ L=$$l; \
+ done
+
+CLEAN-DEPENDS-FULL= \
+ L="${_DEPEND_DIRS}"; \
+ checked=""; \
+ while [ -n "$$L" ]; do \
+ l=""; \
+ for d in $$L; do \
+ case $$checked in \
+ $$d\ *|*\ $$d\ *|*\ $$d) \
+ continue;; \
+ esac; \
+ checked="$$checked $$d"; \
+ if [ ! -d $$d ]; then \
+ ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
+ continue; \
+ fi; \
+ if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
+ ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
+ continue; \
+ fi; \
+ state=0; \
+ for child in $$children; do \
+ case $$state in \
+ 0) \
+ if [ -d $$child ]; then \
+ ${ECHO_CMD} $$d; \
+ fi; \
+ state=1;; \
+ 1) \
+ case "$$checked $$l" in \
+ $$child\ *|*\ $$child\ *|*\ $$child) \
+ continue;; \
+ esac; \
+ l="$$l $$child";; \
+ esac; \
+ done; \
+ done; \
+ L=$$l; \
+ done
+
+CLEAN-DEPENDS-LIMITED= \
+ L="${_DEPEND_DIRS}"; \
+ checked=""; \
+ while [ -n "$$L" ]; do \
+ l=""; \
+ for d in $$L; do \
+ case $$checked in \
+ $$d\ *|*\ $$d\ *|*\ $$d) \
+ continue;; \
+ esac; \
+ checked="$$checked $$d"; \
+ if [ ! -d $$d ]; then \
+ ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
+ continue; \
+ fi; \
+ if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
+ ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
+ continue; \
+ fi; \
+ state=0; \
+ for child in $$children; do \
+ case $$state in \
+ 0) \
+ if [ ! -d $$child ]; then \
+ break; \
+ fi; \
+ state=1; \
+ ${ECHO_CMD} $$d;; \
+ 1) \
+ case "$$checked $$l" in \
+ $$child\ *|*\ $$child\ *|*\ $$child) \
+ continue;; \
+ esac; \
+ l="$$l $$child";; \
+ esac; \
+ done; \
+ done; \
+ L=$$l; \
+ done
+
+.if !target(clean-depends)
+clean-depends:
+ @for dir in $$(${CLEAN-DEPENDS-FULL}); do \
+ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
+ done
+.endif
+
+.if !target(limited-clean-depends)
+limited-clean-depends:
+ @for dir in $$(${CLEAN-DEPENDS-LIMITED}); do \
+ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
+ done
+.endif
+
+.if !target(deinstall-depends)
+deinstall-depends:
+ @for dir in $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} deinstall); \
+ done
+.endif
+
+.if !target(fetch-recursive)
+fetch-recursive:
+ @${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies"
+ @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} fetch); \
+ done
+.endif
+
+.if !target(fetch-recursive-list)
+fetch-recursive-list:
+ @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} fetch-list); \
+ done
+.endif
+
+# Used by fetch-required and fetch-required list, this script looks
+# at each of the dependencies. If 3 items are specified in the tuple,
+# such as foo:${PORTSDIR}/graphics/foo:extract, the first item (foo)
+# is examined. Only if it begins with a / and does not exist on the
+# file-system will ``make targ'' proceed.
+# For more usual (dual-item) dependency tuples, the ``make targ''
+# proceeds, if the exact package, which the directory WOULD'VE installed,
+# is not yet installed.
+# This is the exact behaviour of the old code, and it may need
+# revisiting. For example, the entire first case seems dubious, and in
+# the second case we, probably, should be satisfied with _any_ (earlier)
+# package, with the same origin as that of the dir.
+#
+# -mi
+FETCH_LIST?= for i in $$deps; do \
+ prog=$${i%%:*}; dir=$${i\#*:}; \
+ case $$dir in \
+ *:*) if [ $$prog != $${prog\#/} -o ! -e $$prog ]; then \
+ dir=$${dir%%:*}; \
+ else \
+ continue; \
+ fi;; \
+ *) if [ -d ${PKG_DBDIR}/$$(cd $$dir; ${MAKE} -V PKGNAME) ]; then \
+ continue; \
+ fi;; \
+ esac; \
+ echo cd $$dir; ${MAKE} $$targ; \
+ done
+
+.if !target(fetch-required)
+fetch-required: fetch
+.if defined(NO_DEPENDS)
+ @${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any distfiles for ${PKG_NAME}"
+.else
+ @${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies"
+.for deptype in EXTRACT PATCH FETCH BUILD RUN
+.if defined(${deptype}_DEPENDS)
+ @targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
+.endif
+.endfor
+.endif
+
+.endif
+
+.if !target(fetch-required-list)
+fetch-required-list: fetch-list
+.if !defined(NO_DEPENDS)
+.for deptype in EXTRACT PATCH FETCH BUILD RUN
+.if defined(${deptype}_DEPENDS)
+ @targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
+.endif
+.endfor
+.endif
+.endif
+
+.if !target(checksum-recursive)
+checksum-recursive:
+ @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies"
+ @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} checksum); \
+ done
+.endif
+
+# Dependency lists: build and runtime. Print out directory names.
+
+build-depends-list:
+.if defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
+ @${BUILD-DEPENDS-LIST}
+.endif
+
+BUILD-DEPENDS-LIST= \
+ for dir in $$(${ECHO_CMD} "${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${SED} -E -e 's,([^: ]*):([^: ]*)(:[^ ]*)?,\2,g' -e 'y/ /\n/'| ${SORT} -u); do \
+ if [ -d $$dir ]; then \
+ ${ECHO_CMD} $$dir; \
+ else \
+ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+ fi; \
+ done | ${SORT} -u
+
+run-depends-list:
+.if defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
+ @${RUN-DEPENDS-LIST}
+.endif
+
+RUN-DEPENDS-LIST= \
+ for dir in $$(${ECHO_CMD} "${_LIB_RUN_DEPENDS:C,.*:([^:]*).*,\1,}" | ${SED} -e 'y/ /\n/' | ${SORT} -u); do \
+ if [ -d $$dir ]; then \
+ ${ECHO_CMD} $$dir; \
+ else \
+ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+ fi; \
+ done | ${SORT} -u
+
+# Package (recursive runtime) dependency list. Print out both directory names
+# and package names.
+
+package-depends-list:
+.if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
+ @${PACKAGE-DEPENDS-LIST}
+.endif
+
+_LIB_RUN_DEPENDS= ${LIB_DEPENDS} ${RUN_DEPENDS}
+PACKAGE-DEPENDS-LIST?= \
+ if [ "${CHILD_DEPENDS}" ]; then \
+ installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \
+ ${TRUE}); \
+ if [ "$$installed" ]; then \
+ break; \
+ fi; \
+ if [ -z "$$installed" ]; then \
+ installed="${PKGNAME}"; \
+ fi; \
+ for pkgname in $$installed; do \
+ ${ECHO_CMD} "$$pkgname ${.CURDIR} ${PKGORIGIN}"; \
+ done; \
+ fi; \
+ checked="${PARENT_CHECKED}"; \
+ for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
+ dir=$$(${REALPATH} $$dir); \
+ if [ -d $$dir ]; then \
+ case $$checked in \
+ $$dir|$$dir\ *|*\ $$dir|*\ $$dir\ *) continue;; \
+ esac; \
+ childout=$$(cd $$dir; ${MAKE} CHILD_DEPENDS=yes PARENT_CHECKED="$$checked" package-depends-list); \
+ set -- $$childout; \
+ childdir=""; \
+ while [ $$\# != 0 ]; do \
+ childdir="$$childdir $$2"; \
+ ${ECHO_CMD} "$$1 $$2 $$3"; \
+ shift 3; \
+ done; \
+ checked="$$dir $$childdir $$checked"; \
+ else \
+ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+ fi; \
+ done
+
+ACTUAL-PACKAGE-DEPENDS?= \
+ if [ "${_LIB_RUN_DEPENDS}" != " " ]; then \
+ origins=$$(for pkgname in ${PKG_DBDIR}/*; do \
+ if [ -e $$pkgname/+CONTENTS ]; then \
+ ${ECHO_CMD} $${pkgname\#\#*/}; \
+ ${SED} -n -e "s/@comment ORIGIN://p" $$pkgname/+CONTENTS; \
+ fi; \
+ done); \
+ for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
+ tmp=$${dir%/*}; \
+ dir=$${tmp\#\#*/}/$${dir\#\#*/}; \
+ set -- $$origins; \
+ while [ $$\# -gt 1 ]; do \
+ if [ ! -d "${PORTSDIR}/$$2" ]; then \
+ shift; \
+ continue; \
+ fi; \
+ if [ "$$dir" = "$$2" ]; then \
+ ${ECHO_CMD} $$1:$$dir; \
+ if [ -e ${PKG_DBDIR}/$$1/+CONTENTS -a -z "${EXPLICIT_PACKAGE_DEPENDS}" ]; then \
+ packagelist="$$packagelist ${PKG_DBDIR}/$$1/+CONTENTS"; \
+ fi; \
+ break; \
+ fi; \
+ shift 2; \
+ done; \
+ done; \
+ [ -z "$$packagelist" ] || ${AWK} -F '( |:)' 'BEGIN { pkgname="broken_contents" } /@pkgdep / { pkgname=$$2 } /@comment DEPORIGIN:/ { printf "%s:%s\n", pkgname, $$3; pkgname="broken_contents" }' $$packagelist; \
+ fi
+
+# Print out package names.
+
+package-depends:
+ @${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}'
+
+actual-package-depends:
+ @${ACTUAL-PACKAGE-DEPENDS}
+
+# Build packages for port and dependencies
+
+package-recursive: package
+ @for dir in $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} package-noinstall); \
+ done
+
+# Show missing dependiencies
+missing:
+ @for dir in $$(${ALL-DEPENDS-LIST}); do \
+ THISORIGIN=$${dir##${PORTSDIR}/}; \
+ installed=$$(${PKG_INFO} -qO $${THISORIGIN}); \
+ if [ -z "$$installed" ]; then \
+ ${ECHO_CMD} $$THISORIGIN; \
+ fi; \
+ done
+
+################################################################
+# Everything after here are internal targets and really
+# shouldn't be touched by anybody but the release engineers.
+################################################################
+
+# This target generates an index entry suitable for aggregation into
+# a large index. Format is:
+#
+# distribution-name|port-path|installation-prefix|comment| \
+# description-file|maintainer|categories|extract-depends| \
+# patch-depends|fetch-depends|build-depends|run-depends|www site
+#
+# If this ever changes, portmgr should contact the portsnap maintainer
+# first to avoid gratuitous breakage.
+
+# XXX Older versions do not support the :u make modifier. The .else
+# clause can be removed once 6.3-RELEASE is no longer supported.
+.if ${OSVERSION} >= 603104
+. if !target(describe)
+_EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_FETCH_DEPENDS=${FETCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_LIB_DEPENDS=${LIB_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_BUILD_DEPENDS=${BUILD_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
+_RUN_DEPENDS=${RUN_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
+. if exists(${DESCR})
+_DESCR=${DESCR}
+. else
+_DESCR=/dev/null
+. endif
+
+describe:
+ @${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \
+ ${ECHO_CMD} -n ${COMMENT:Q}; \
+ ${ECHO_CMD} -n "|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|"; \
+ while read one two discard; do \
+ case "$$one" in \
+ WWW:) case "$$two" in \
+ https://*|http://*|ftp://*) ${ECHO_CMD} -n "$$two" ;; \
+ *) ${ECHO_CMD} -n "http://$$two" ;; \
+ esac; \
+ break; \
+ ;; \
+ esac; \
+ done < ${DESCR}; ${ECHO_CMD}
+. endif
+.else
+. if !target(describe)
+describe:
+ @${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"
+. if defined(COMMENT)
+ @${ECHO_CMD} -n ${COMMENT:Q}
+. else
+ @${ECHO_CMD} -n '** No Description'
+. endif
+ @perl -e ' \
+ if ( -f q{${DESCR}} ) { \
+ print q{|${DESCR}}; \
+ } else { \
+ print q{|/dev/null}; \
+ } \
+ print q{|${MAINTAINER}|${CATEGORIES}|}; \
+ @edirs = map((split /:/)[1], split(q{ }, q{${EXTRACT_DEPENDS}})); \
+ @pdirs = map((split /:/)[1], split(q{ }, q{${PATCH_DEPENDS}})); \
+ @fdirs = map((split /:/)[1], split(q{ }, q{${FETCH_DEPENDS}})); \
+ @bdirs = map((split /:/)[1], split(q{ }, q{${BUILD_DEPENDS}})); \
+ @rdirs = map((split /:/)[1], split(q{ }, q{${RUN_DEPENDS}})); \
+ @ldirs = map((split /:/)[1], split(q{ }, q{${LIB_DEPENDS}})); \
+ for my $$i (\@edirs, \@pdirs, \@fdirs, \@bdirs, \@rdirs, \@ddirs, \@ldirs) { \
+ my @dirs = @$$i; \
+ @$$i = (); \
+ for (@dirs) { \
+ if (-d $$_) { \
+ push @$$i, $$_; \
+ } else { \
+ print STDERR qq{${PKGNAME}: \"$$_\" non-existent -- dependency list incomplete\n}; \
+ exit(1); \
+ } \
+ } \
+ } \
+ for (@edirs, @ddirs) { \
+ $$xe{$$_} = 1; \
+ } \
+ print join(q{ }, sort keys %xe), q{|}; \
+ for (@pdirs, @ddirs) { \
+ $$xp{$$_} = 1; \
+ } \
+ print join(q{ }, sort keys %xp), q{|}; \
+ for (@fdirs, @ddirs) { \
+ $$xf{$$_} = 1; \
+ } \
+ print join(q{ }, sort keys %xf), q{|}; \
+ for (@bdirs, @ddirs, @ldirs) { \
+ $$xb{$$_} = 1; \
+ } \
+ print join(q{ }, sort keys %xb), q{|}; \
+ for (@rdirs, @ddirs, @ldirs) { \
+ $$xr{$$_} = 1; \
+ } \
+ print join(q{ }, sort keys %xr), q{|}; \
+ if (open(DESCR, q{${DESCR}})) { \
+ while (<DESCR>) { \
+ if (/^WWW:\s+(\S+)/) { \
+ print $$1; \
+ last; \
+ } \
+ } \
+ } \
+ print qq{\n};'
+. endif
+.endif
+
+www-site:
+.if exists(${DESCR})
+ @${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1
+.else
+ @${ECHO_CMD}
+.endif
+
+.if !target(readmes)
+readmes: readme
+.endif
+
+.if !target(readme)
+readme:
+ @${RM} -f ${.CURDIR}/README.html
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.CURDIR}/README.html
+.endif
+
+${.CURDIR}/README.html:
+ @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
+ @__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \
+ ${SED} -e 's|%%PORT%%|'$$(${ECHO_CMD} ${.CURDIR} | \
+ ${SED} -e 's|.*/\([^/]*/[^/]*\)$$|\1|')'|g' \
+ -e 's|%%PKG%%|${PKGNAME}|g' \
+ -e 's|%%COMMENT%%|'"$$(${ECHO_CMD} ${COMMENT:Q})"'|' \
+ -e '/%%COMMENT%%/d' \
+ -e 's|%%DESCR%%|'"$$(${ECHO_CMD} ${DESCR} | \
+ ${SED} -e 's|${.CURDIR}/||')"'|' \
+ -e 's|%%EMAIL%%|'"$$(${ECHO_CMD} "${MAINTAINER}" | \
+ ${SED} -e 's/([^)]*)//;s/.*<//;s/>.*//')"'|g' \
+ -e 's|%%MAINTAINER%%|${MAINTAINER}|g' \
+ -e 's|%%WEBSITE%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \
+ $${__softMAKEFLAGS} pretty-print-www-site)"'|' \
+ -e 's|%%BUILD_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \
+ $${__softMAKEFLAGS} pretty-print-build-depends-list)"'|' \
+ -e 's|%%RUN_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \
+ $${__softMAKEFLAGS} pretty-print-run-depends-list)"'|' \
+ -e 's|%%TOP%%|'"$$(${ECHO_CMD} ${CATEGORIES} | \
+ ${SED} -e 's| .*||' -e 's|[^/]*|..|g')"'/..|' \
+ ${TEMPLATES}/README.port >> ${.TARGET}
+
+# The following two targets require an up-to-date INDEX in ${PORTSDIR}
+
+_PRETTY_PRINT_DEPENDS_LIST=\
+ if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \
+ ${ECHO_MSG} "${.TARGET} requires an INDEX file (${INDEXFILE}). Please run make index or make fetchindex."; \
+ else \
+ target=${.TARGET:C/pretty-print-(.*)-depends-list/\1/} ; \
+ if [ "$$target" = "build" ] ; then fldnum=8 ; else fldnum=9 ; fi; \
+ ${ECHO_MSG} -n 'This port requires package(s) "' ; \
+ ${ECHO_MSG} -n `${AWK} -F\| "\\$$1 ~ /^${PKGNAME}/ {print \\$$$${fldnum};}" ${INDEXDIR}/${INDEXFILE}` ; \
+ ${ECHO_MSG} "\" to $$target."; \
+ fi;
+
+
+.if !target(pretty-print-build-depends-list)
+pretty-print-build-depends-list:
+.if defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \
+ defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
+ @${_PRETTY_PRINT_DEPENDS_LIST}
+.endif
+.endif
+
+.if !target(pretty-print-run-depends-list)
+pretty-print-run-depends-list:
+.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS)
+ @${_PRETTY_PRINT_DEPENDS_LIST}
+.endif
+.endif
+
+_SUB_LIST_TEMP= ${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
+.if !target(apply-slist)
+apply-slist:
+.if defined(SUB_FILES)
+.for file in ${SUB_FILES}
+.if !exists(${FILESDIR}/${file}.in)
+ @${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1
+.else
+ @${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file}
+.endif
+.endfor
+.for i in pkg-message pkg-install pkg-deinstall pkg-req
+.if ${SUB_FILES:M${i}*}!=""
+${i:S/-//:U}= ${WRKDIR}/${SUB_FILES:M${i}*}
+.endif
+.endfor
+.endif
+.endif
+
+# Generate packing list. Also tests to make sure all required package
+# files exist.
+
+.if !target(generate-plist)
+generate-plist:
+ @${ECHO_MSG} "===> Generating temporary packing list"
+ @${MKDIR} `${DIRNAME} ${TMPPLIST}`
+ @if [ ! -f ${DESCR} ]; then ${ECHO_MSG} "** Missing pkg-descr for ${PKGNAME}."; exit 1; fi
+ @>${TMPPLIST}
+ @for file in ${PLIST_FILES}; do \
+ ${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \
+ done
+ @for man in ${__MANPAGES}; do \
+ ${ECHO_CMD} $${man} >> ${TMPPLIST}; \
+ done
+.for _PREFIX in ${PREFIX}
+.if ${_TMLINKS:M${_PREFIX}*}x != x
+ @for i in ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||}; do \
+ ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
+ done
+.endif
+.if ${_TMLINKS:N${_PREFIX}*}x != x
+ @${ECHO_CMD} @cwd / >> ${TMPPLIST}
+ @for i in ${_TMLINKS:N${_PREFIX}*:S|^/||}; do \
+ ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
+ done
+ @${ECHO_CMD} '@cwd ${PREFIX}' >> ${TMPPLIST}
+.endif
+ @for i in $$(${ECHO_CMD} ${__MANPAGES} ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||} ' ' | ${SED} -E -e 's|man([1-9ln])/([^/ ]+) |cat\1/\2 |g'); do \
+ ${ECHO_CMD} "@unexec rm -f %D/$$i %D/$${i%.gz} %D/$${i%.bz2} %D/$$i.gz %D/$$i.bz2" >> ${TMPPLIST}; \
+ done
+.endfor
+ @if [ -f ${PLIST} ]; then \
+ ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \
+ fi
+.for reinplace in ${PLIST_REINPLACE}
+.if defined(PLIST_REINPLACE_${reinplace:U})
+ @${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST}
+.endif
+.endfor
+
+.for dir in ${PLIST_DIRS}
+ @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^, at dirrm ,' >> ${TMPPLIST}
+.endfor
+# To be removed once INSTALLS_SHLIB has been eradicated.
+.if defined(INSTALLS_SHLIB) && !defined(INSTALL_AS_USER)
+ @${ECHO_CMD} "@exec ${LDCONFIG_PLIST_EXEC_CMD}" >> ${TMPPLIST}
+ @${ECHO_CMD} "@unexec ${LDCONFIG_PLIST_UNEXEC_CMD}" >> ${TMPPLIST}
+.elif defined(INSTALLS_SHLIB)
+ @${ECHO_CMD} "@exec ${LDCONFIG_PLIST_EXEC_CMD} || ${TRUE}" >> ${TMPPLIST}
+ @${ECHO_CMD} "@unexec ${LDCONFIG_PLIST_UNEXEC_CMD} || ${TRUE}" >> ${TMPPLIST}
+.endif
+.if defined(USE_LINUX_PREFIX)
+.if defined(USE_LDCONFIG)
+ @${ECHO_CMD} "@exec ${LDCONFIG_CMD}" >> ${TMPPLIST}
+ @${ECHO_CMD} "@unexec ${LDCONFIG_CMD}" >> ${TMPPLIST}
+.endif
+.else
+.if defined(USE_LDCONFIG)
+.if !defined(INSTALL_AS_USER)
+ @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG}" >> ${TMPPLIST}
+ @${ECHO_CMD} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST}
+.else
+ @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG} || ${TRUE}" >> ${TMPPLIST}
+ @${ECHO_CMD} "@unexec ${LDCONFIG} -R || ${TRUE}" >> ${TMPPLIST}
+.endif
+.endif
+.if defined(USE_LDCONFIG32)
+.if !defined(INSTALL_AS_USER)
+ @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32}" >> ${TMPPLIST}
+ @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R" >> ${TMPPLIST}
+.else
+ @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32} || ${TRUE}" >> ${TMPPLIST}
+ @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R || ${TRUE}" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+.endif
+
+${TMPPLIST}:
+ @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} generate-plist
+
+.if !target(add-plist-docs)
+add-plist-docs:
+.if defined(PORTDOCS) && !defined(NOPORTDOCS)
+ @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
+ [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
+ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+ fi
+.for x in ${PORTDOCS}
+ @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
+ if [ ! -e ${DOCSDIR}/${x} ]; then \
+ ${ECHO_CMD} ${DOCSDIR_REL}/${x} >> ${TMPPLIST}; \
+ fi;fi
+.endfor
+ @${FIND} -P ${PORTDOCS:S/^/${DOCSDIR}\//} ! -type d 2>/dev/null | \
+ ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
+ @${FIND} -P -d ${PORTDOCS:S/^/${DOCSDIR}\//} -type d 2>/dev/null | \
+ ${SED} -ne 's,^${PREFIX}/, at dirrm ,p' >> ${TMPPLIST}
+ @${ECHO_CMD} "@dirrm ${DOCSDIR_REL}" >> ${TMPPLIST}
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !target(add-plist-examples)
+add-plist-examples:
+.if defined(PORTEXAMPLES) && !defined(NOPORTEXAMPLES)
+ @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
+ [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
+ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+ fi
+.for x in ${PORTEXAMPLES}
+ @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
+ if [ ! -e ${EXAMPLESDIR}/${x} ]; then \
+ ${ECHO_CMD} ${EXAMPLESDIR}/${x} | \
+ ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
+ fi;fi
+.endfor
+ @${FIND} -P ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} ! -type d 2>/dev/null | \
+ ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
+ @${FIND} -P -d ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} -type d 2>/dev/null | \
+ ${SED} -ne 's,^${PREFIX}/, at dirrm ,p' >> ${TMPPLIST}
+ @${ECHO_CMD} "@dirrm ${EXAMPLESDIR:S,^${PREFIX}/,,}" >> ${TMPPLIST}
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !target(add-plist-data)
+add-plist-data:
+.if defined(PORTDATA) && !defined(NOPORTDATA)
+ @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
+ [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
+ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+ fi
+.for x in ${PORTDATA}
+ @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
+ if [ ! -e ${DATADIR}/${x} ]; then \
+ ${ECHO_CMD} ${DATADIR}/${x} | \
+ ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
+ fi;fi
+.endfor
+ @${FIND} -P ${PORTDATA:S/^/${DATADIR}\//} ! -type d 2>/dev/null | \
+ ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
+ @${FIND} -P -d ${PORTDATA:S/^/${DATADIR}\//} -type d 2>/dev/null | \
+ ${SED} -ne 's,^${PREFIX}/, at dirrm ,p' >> ${TMPPLIST}
+ @${ECHO_CMD} "@dirrm ${DATADIR:S,^${PREFIX}/,,}" >> ${TMPPLIST}
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !target(add-plist-info)
+add-plist-info:
+# Process GNU INFO files at package install/deinstall time
+.if defined(INFO)
+.for i in ${INFO}
+ install-info --quiet ${PREFIX}/${INFO_PATH}/$i.info ${PREFIX}/${INFO_PATH}/dir
+ @${ECHO_CMD} "@unexec install-info --quiet --delete %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
+ >> ${TMPPLIST}
+ @${LS} ${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${PREFIX}/::g >> ${TMPPLIST}
+ @${ECHO_CMD} "@exec install-info --quiet %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
+ >> ${TMPPLIST}
+.endfor
+.if defined(INFO_SUBDIR)
+ @${ECHO_CMD} "@unexec ${RMDIR} %D/${INFO_PATH}/${INFO_SUBDIR} 2> /dev/null || true" >> ${TMPPLIST}
+.endif
+.if (${PREFIX} != "/usr")
+ @${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST}
+.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE})
+ @${ECHO_CMD} "@unexec rmdir %D/${INFO_PATH} 2>/dev/null || true" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+.endif
+
+# If we're installing into a non-standard PREFIX, we need to remove that directory at
+# deinstall-time
+.if !target(add-plist-post)
+add-plist-post:
+.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr")
+ @${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST}
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.if !target(install-rc-script)
+install-rc-script:
+.if defined(USE_RCORDER) || defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
+.if defined(USE_RCORDER)
+ @${ECHO_MSG} "===> Installing early rc.d startup script(s)"
+ @${ECHO_CMD} "@cwd /" >> ${TMPPLIST}
+ @for i in ${USE_RCORDER}; do \
+ ${INSTALL_SCRIPT} ${WRKDIR}/$${i} /etc/rc.d/$${i%.sh}; \
+ ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
+ done
+ @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
+.endif
+.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
+ @${ECHO_MSG} "===> Installing rc.d startup script(s)"
+ @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
+ @for i in ${USE_RC_SUBR}; do \
+ ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${PREFIX}/etc/rc.d/$${i%.sh}${RC_SUBR_SUFFIX}; \
+ ${ECHO_CMD} "etc/rc.d/$${i%.sh}${RC_SUBR_SUFFIX}" >> ${TMPPLIST}; \
+ done
+.endif
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+# Compress (or uncompress) and symlink manpages.
+.if !target(compress-man)
+compress-man:
+.if defined(_MANPAGES) || defined(_MLINKS)
+.if ${MANCOMPRESSED} == yes && defined(NO_MANCOMPRESS)
+ @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
+ @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE}
+.elif ${MANCOMPRESSED} == no && !defined(NO_MANCOMPRESS)
+ @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
+ @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE}
+.endif
+.if defined(_MLINKS)
+ @set -- ${_MLINKS}; \
+ while :; do \
+ [ $$# -eq 0 ] && break || ${TRUE}; \
+ ${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \
+ ${LN} -fs `${ECHO_CMD} $$1 $$2 | ${AWK} '{ \
+ z=split($$1, a, /\//); x=split($$2, b, /\//); \
+ while (a[i] == b[i]) i++; \
+ for (q=i; q<x; q++) printf "../"; \
+ for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \
+ shift; shift; \
+ done
+.endif
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+# Fake installation of package so that user can pkg_delete it later.
+# Also, make sure that an installed port is recognized correctly in
+# accordance to the @pkgdep directive in the packing lists
+
+.if !target(fake-pkg)
+fake-pkg:
+.if !defined(NO_PKG_REGISTER)
+ @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
+ @${RM} -f /tmp/${PKGNAME}-required-by
+.if defined(FORCE_PKG_REGISTER)
+ @if [ -e ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY ]; then \
+ ${CP} ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY /tmp/${PKGNAME}-required-by; \
+ fi
+ @${RM} -rf ${PKG_DBDIR}/${PKGNAME}
+.endif
+ @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
+ ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
+ ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
+ ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
+ ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
+ ${ECHO_CMD} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
+ if [ -f ${PKGINSTALL} ]; then \
+ ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
+ fi; \
+ if [ -f ${PKGDEINSTALL} ]; then \
+ ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
+ fi; \
+ if [ -f ${PKGREQ} ]; then \
+ ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
+ fi; \
+ if [ -f ${PKGMESSAGE} ]; then \
+ ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
+ fi; \
+ for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \
+ if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \
+ if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
+ >/dev/null 2>&1; then \
+ ${ECHO_CMD} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
+ fi; \
+ fi; \
+ done; \
+ fi
+.if !defined(NO_MTREE)
+ @if [ -f ${MTREE_FILE} ]; then \
+ ${CP} ${MTREE_FILE} ${PKG_DBDIR}/${PKGNAME}/+MTREE_DIRS; \
+ fi
+.endif
+ @if [ -e /tmp/${PKGNAME}-required-by ]; then \
+ ${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \
+ ${RM} -f /tmp/${PKGNAME}-required-by; \
+ fi
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+# Depend is generally meaningless for arbitrary ports, but if someone wants
+# one they can override this. This is just to catch people who've gotten into
+# the habit of typing `make depend all install' as a matter of course.
+#
+.if !target(depend)
+depend:
+.endif
+
+# Same goes for tags
+.if !target(tags)
+tags:
+.endif
+
+.if !defined(NOPRECIOUSSOFTMAKEVARS)
+.for softvar in CKSUMFILES _MLINKS
+.if defined(${softvar})
+__softMAKEFLAGS+= '${softvar}+=${${softvar}:S/'/'\''/g}'
+.endif
+.endfor
+.endif
+
+.if !defined(NOPRECIOUSMAKEVARS)
+# These won't change, so we can pass them through the environment
+.MAKEFLAGS: \
+ ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+ OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+ OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+ OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+ SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}"
+.endif
+
+.if !target(config)
+config:
+.if !defined(OPTIONS)
+ @${ECHO_MSG} "===> No options to configure"
+.else
+.if ${OPTIONSFILE} != ${OPTIONSFILE}
+ @${ECHO_MSG} "===> Using wrong configuration file ${OPTIONSFILE}"
+ @exit 1
+.endif
+.if ${UID} != 0 && !defined(INSTALL_AS_USER)
+ @optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
+ ${ECHO_MSG} "===> Switching to root credentials to create $${optionsdir}"; \
+ (${SU_CMD} "${SH} -c \"${MKDIR} $${optionsdir} 2> /dev/null\"") || \
+ (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1); \
+ ${ECHO_MSG} "===> Returning to user credentials"
+.else
+ @(optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
+ ${MKDIR} $${optionsdir} 2> /dev/null) || \
+ (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1)
+.endif
+ - at if [ -e ${OPTIONSFILE} ]; then \
+ . ${OPTIONSFILE}; \
+ fi; \
+ set -- ${OPTIONS} XXX; \
+ while [ $$# -gt 3 ]; do \
+ OPTIONSLIST="$${OPTIONSLIST} $$1"; \
+ defaultval=$$3; \
+ withvar=WITH_$$1; \
+ withoutvar=WITHOUT_$$1; \
+ withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
+ withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
+ if [ ! -z "$${withval}" ]; then \
+ val=on; \
+ elif [ ! -z "$${withoutval}" ]; then \
+ val=off; \
+ else \
+ val=$$3; \
+ fi; \
+ DEFOPTIONS="$${DEFOPTIONS} $$1 \"$$2\" $${val}"; \
+ shift 3; \
+ done; \
+ TMPOPTIONSFILE=$$(mktemp -t portoptions); \
+ trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
+ ${SH} -c "${DIALOG} --checklist \"Options for ${PKGNAME:C/-([^-]+)$/ \1/}\" 21 70 15 $${DEFOPTIONS} 2> $${TMPOPTIONSFILE}"; \
+ status=$$?; \
+ if [ $${status} -ne 0 ] ; then \
+ ${RM} -f $${TMPOPTIONSFILE}; \
+ ${ECHO_MSG} "===> Options unchanged"; \
+ exit 0; \
+ fi; \
+ if [ ! -e ${TMPOPTIONSFILE} ]; then \
+ ${ECHO_MSG} "===> No user-specified options to save for ${PKGNAME}"; \
+ exit 0; \
+ fi; \
+ SELOPTIONS=$$(${CAT} $${TMPOPTIONSFILE}); \
+ ${RM} -f $${TMPOPTIONSFILE}; \
+ TMPOPTIONSFILE=$$(mktemp -t portoptions); \
+ trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
+ ${ECHO_CMD} "# This file is auto-generated by 'make config'." > $${TMPOPTIONSFILE}; \
+ ${ECHO_CMD} "# No user-servicable parts inside!" >> $${TMPOPTIONSFILE}; \
+ ${ECHO_CMD} "# Options for ${PKGNAME}" >> $${TMPOPTIONSFILE}; \
+ ${ECHO_CMD} "_OPTIONS_READ=${PKGNAME}" >> $${TMPOPTIONSFILE}; \
+ for i in $${OPTIONSLIST}; do \
+ ${ECHO_CMD} $${SELOPTIONS} | ${GREP} -qw $${i}; \
+ if [ $$? -eq 0 ]; then \
+ ${ECHO_CMD} WITH_$${i}=true >> $${TMPOPTIONSFILE}; \
+ else \
+ ${ECHO_CMD} WITHOUT_$${i}=true >> $${TMPOPTIONSFILE}; \
+ fi; \
+ done; \
+ if [ `${ID} -u` != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
+ ${ECHO_MSG} "===> Switching to root credentials to write ${OPTIONSFILE}"; \
+ ${SU_CMD} "${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}"; \
+ ${ECHO_MSG} "===> Returning to user credentials"; \
+ else \
+ ${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}; \
+ fi; \
+ ${RM} -f $${TMPOPTIONSFILE}
+.endif
+.endif
+
+.if !target(config-recursive)
+config-recursive:
+ @${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies";
+ @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} config-conditional); \
+ done
+.endif
+
+.if !target(config-conditional)
+config-conditional:
+.if defined(OPTIONS)
+.if exists(${OPTIONSFILE})
+# scan saved options and invalidate them, if the set of options does not match
+ @. ${OPTIONSFILE}; \
+ set ${OPTIONS} XXX; \
+ while [ $$# -gt 3 ]; do \
+ withvar=WITH_$$1; \
+ withoutvar=WITHOUT_$$1; \
+ withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
+ withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
+ if [ ! -z "$${withval}" ]; then \
+ val=on; \
+ elif [ ! -z "$${withoutval}" ]; then \
+ val=off; \
+ else \
+ val=missing; \
+ fi; \
+ if [ "$${val}" = "missing" ]; then \
+ OPTIONS_INVALID=yes; \
+ fi; \
+ shift 3; \
+ done; \
+ if [ "$${OPTIONS_INVALID}" = "yes" ]; then \
+ cd ${.CURDIR} && ${MAKE} config; \
+ fi;
+.else
+ cd ${.CURDIR} && ${MAKE} config;
+.endif
+.endif
+.endif
+
+.if !target(showconfig)
+showconfig:
+.if defined(OPTIONS)
+ @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}:"
+ - at if [ -e ${OPTIONSFILE} ]; then \
+ . ${OPTIONSFILE}; \
+ fi; \
+ set -- ${OPTIONS} XXX; \
+ while [ $$# -gt 3 ]; do \
+ defaultval=$$3; \
+ withvar=WITH_$$1; \
+ withoutvar=WITHOUT_$$1; \
+ withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
+ withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
+ if [ ! -z "$${withval}" ]; then \
+ val=on; \
+ elif [ ! -z "$${withoutval}" ]; then \
+ val=off; \
+ else \
+ val="$$3 (default)"; \
+ fi; \
+ ${ECHO_MSG} " $$1=$${val} \"$$2\""; \
+ shift 3; \
+ done
+ @${ECHO_MSG} "===> Use 'make config' to modify these settings"
+.endif
+.endif
+
+.if !target(showconfig-recursive)
+showconfig-recursive:
+ @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME} and dependencies";
+ @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} showconfig); \
+ done
+.endif
+
+.if !target(rmconfig)
+rmconfig:
+.if defined(OPTIONS) && exists(${OPTIONSFILE})
+ -@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \
+ optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
+ if [ `${ID} -u` != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
+ ${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONSFILE} and $${optionsdir}"; \
+ ${SU_CMD} "${RM} -f ${OPTIONSFILE} ; \
+ ${RMDIR} $${optionsdir}"; \
+ ${ECHO_MSG} "===> Returning to user credentials"; \
+ else \
+ ${RM} -f ${OPTIONSFILE}; \
+ ${RMDIR} $${optionsdir}; \
+ fi
+.else
+ @${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}"
+.endif
+.endif
+
+.if !target(rmconfig-recursive)
+rmconfig-recursive:
+ @${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and dependencies";
+ @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+ (cd $$dir; ${MAKE} rmconfig); \
+ done
+.endif
+
+desktop-categories:
+ @categories=""; \
+ for native_category in ${CATEGORIES}; do \
+ c=""; \
+ case $$native_category in \
+ accessibility) c="Accessibility Utility" ;; \
+ archivers) c="Archiving" ;; \
+ astro) c="Astronomy Science Education" ;; \
+ audio) c="Audio AudioVideo" ;; \
+ benchmarks) c="System" ;; \
+ biology) c="Biology Science Education" ;; \
+ cad) c="Engineering" ;; \
+ databases) c="Database" ;; \
+ deskutils) c="Utility" ;; \
+ devel) c="Development" ;; \
+ dns) c="Network" ;; \
+ elisp) c="Development" ;; \
+ emulators) c="Emulator" ;; \
+ finance) c="Finance Office" ;; \
+ ftp) c="FileTransfer Network" ;; \
+ games) c="Game" ;; \
+ gnome) c="GNOME GTK" ;; \
+ graphics) c="Graphics" ;; \
+ hamradio) c="HamRadio" ;; \
+ haskell) c="Development" ;; \
+ ipv6) c="Network" ;; \
+ irc) c="IRCClient Network" ;; \
+ java) c="Java Development" ;; \
+ kde) c="KDE QT" ;; \
+ lang) c="Development" ;; \
+ lisp) c="Development" ;; \
+ mail) c="Email Office Network" ;; \
+ mbone) c="Network AudioVideo" ;; \
+ multimedia) c="AudioVideo" ;; \
+ net) c="Network" ;; \
+ net-im) c="InstantMessaging Network" ;; \
+ net-mgmt) c="Network" ;; \
+ net-p2p) c="P2P Network" ;; \
+ news) c="News" ;; \
+ pear) c="WebDevelopment Development" ;; \
+ perl5) c="Development" ;; \
+ python) c="Development" ;; \
+ ruby) c="Development" ;; \
+ rubygems) c="Development" ;; \
+ scheme) c="Development" ;; \
+ science) c="Science Education" ;; \
+ security) c="Security System" ;; \
+ shells) c="Shell" ;; \
+ sysutils) c="System Utility" ;; \
+ tcl*|tk*) c="Development" ;; \
+ www) c="Network" ;; \
+ x11-clocks) c="Clock Utility" ;; \
+ x11-fm) c="FileManager" ;; \
+ xfce) c="GTK" ;; \
+ zope) c="WebDevelopment Development" ;; \
+ esac; \
+ if [ -n "$$c" ]; then \
+ categories="$$categories $$c"; \
+ fi; \
+ done; \
+ if [ -n "$$categories" ]; then \
+ for c in Application $$categories; do ${ECHO_MSG} "$$c"; done \
+ | ${SORT} -u | ${TR} '\n' ';'; \
+ ${ECHO_MSG}; \
+ fi
+
+VALID_DESKTOP_CATEGORIES+= Application Core Development Building Debugger IDE \
+ GUIDesigner Profiling RevisionControl Translation Office Calendar \
+ ContactManagement Database Dictionary Chart Email Finance FlowChart PDA \
+ ProjectManagement Presentation Spreadsheet WordProcessor Graphics \
+ 2DGraphics VectorGraphics RasterGraphics 3DGraphics Scanning OCR \
+ Photography Viewer Settings DesktopSettings HardwareSettings \
+ PackageManager Network Dialup InstantMessaging IRCClient FileTransfer \
+ HamRadio News P2P RemoteAccess Telephony WebBrowser WebDevelopment \
+ AudioVideo Audio Midi Mixer Sequencer Tuner Video TV AudioVideoEditing \
+ Player Recorder DiscBurning Game ActionGame AdventureGame ArcadeGame \
+ BoardGame BlocksGame CardGame KidsGame LogicGame RolePlaying Simulation \
+ SportsGame StrategyGame Education Art Construction Music Languages \
+ Science Astronomy Biology Chemistry Geology Math MedicalSoftware Physics \
+ Teaching Amusement Applet Archiving Electronics Emulator Engineering \
+ FileManager Shell Screensaver TerminalEmulator TrayIcon System Filesystem \
+ Monitor Security Utility Accessibility Calculator Clock TextEditor KDE \
+ GNOME GTK Qt Motif Java ConsoleOnly AdvancedSettings
+
+check-desktop-entries:
+.if defined(DESKTOP_ENTRIES)
+ @set -- ${DESKTOP_ENTRIES} XXX; \
+ if [ `${EXPR} \( $$# - 1 \) % 6` -ne 0 ]; then \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: the DESKTOP_ENTRIES list must contain one or more groups of 6 elements"; \
+ exit 1; \
+ fi; \
+ num=1; \
+ while [ $$# -gt 6 ]; do \
+ entry="#$$num"; \
+ if [ -n "$$4" ]; then \
+ entry="$$entry ($$4)"; \
+ elif [ -n "$$1" ]; then \
+ entry="$$entry ($$1)"; \
+ fi; \
+ if [ -z "$$1" ]; then \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 1 (Name) is empty"; \
+ exit 1; \
+ fi; \
+ if [ -z "$$4" ]; then \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 4 (Exec) is empty"; \
+ exit 1; \
+ fi; \
+ if [ -n "$$5" ]; then \
+ for c in `${ECHO_CMD} "$$5" | ${TR} ';' ' '`; do \
+ if ! ${ECHO_CMD} ${VALID_DESKTOP_CATEGORIES} | ${GREP} -wq $$c; then \
+ ${ECHO_CMD} "${PKGNAME}: Makefile error: in desktop entry $$entry: category $$c is not a valid desktop category"; \
+ exit 1; \
+ fi; \
+ done; \
+ if ! ${ECHO_CMD} "$$5" | ${GREP} -q ';$$'; then \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) does not end with a semicolon"; \
+ exit 1; \
+ fi; \
+ else \
+ if [ -z "`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} desktop-categories`" ]; then \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) is empty and could not be deduced from the CATEGORIES variable"; \
+ exit 1; \
+ fi; \
+ fi; \
+ if [ -z "$$6" ]; then \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is empty"; \
+ exit 1; \
+ fi; \
+ if [ "x$$6" != "xtrue" ] && [ "x$$6" != "xfalse" ]; then \
+ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is not \"true\" or \"false\""; \
+ exit 1; \
+ fi; \
+ shift 6; \
+ num=`${EXPR} $$num + 1`; \
+ done
+.else
+ @${DO_NADA}
+.endif
+
+.if !target(install-desktop-entries)
+install-desktop-entries:
+.if defined(DESKTOP_ENTRIES)
+ @(${MKDIR} "${DESKTOPDIR}" 2> /dev/null) || \
+ (${ECHO_MSG} "===> Cannot create ${DESKTOPDIR}, check permissions"; exit 1)
+ @set -- ${DESKTOP_ENTRIES} XXX; \
+ if [ -z "${_DESKTOPDIR_REL}" ]; then \
+ ${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \
+ fi; \
+ while [ $$# -gt 6 ]; do \
+ filename="$$4.desktop"; \
+ pathname="${DESKTOPDIR}/$$filename"; \
+ categories="$$5"; \
+ if [ -z "$$categories" ]; then \
+ categories="`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} desktop-categories`"; \
+ fi; \
+ ${ECHO_CMD} "${_DESKTOPDIR_REL}$$filename" >> ${TMPPLIST}; \
+ ${ECHO_CMD} "[Desktop Entry]" > $$pathname; \
+ ${ECHO_CMD} "Type=Application" >> $$pathname; \
+ ${ECHO_CMD} "Version=0.9.4" >> $$pathname; \
+ ${ECHO_CMD} "Encoding=UTF-8" >> $$pathname; \
+ ${ECHO_CMD} "Name=$$1" >> $$pathname; \
+ if [ -n "$$2" ]; then \
+ ${ECHO_CMD} "Comment=$$2" >> $$pathname; \
+ fi; \
+ if [ -n "$$3" ]; then \
+ ${ECHO_CMD} "Icon=$$3" >> $$pathname; \
+ fi; \
+ ${ECHO_CMD} "Exec=$$4" >> $$pathname; \
+ ${ECHO_CMD} "Categories=$$categories" >> $$pathname; \
+ ${ECHO_CMD} "StartupNotify=$$6" >> $$pathname; \
+ shift 6; \
+ done; \
+ ${ECHO_CMD} "@unexec rmdir ${DESKTOPDIR} 2>/dev/null || true" >> ${TMPPLIST}; \
+ if [ -z "${_DESKTOPDIR_REL}" ]; then \
+ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+ fi
+.else
+ @${DO_NADA}
+.endif
+.endif
+
+.endif
+# End of post-makefile section.
+
+.endif
+# End of the DESTDIR if statement
More information about the freebsd-gecko
mailing list