firewire disk stopped working

Wed Feb 18 17:12:31 PST 2009

On сряда 18 февруари 2009 21:26:31 you wrote:
> On Sun, 2009-02-15 at 17:27 +0200, Boris Kotzev wrote:
> > On неделя 15 февруари 2009 01:12:40 you wrote:
> > > If you haven't already, boot back into the previous kernel environment
> > > and let me know what revision of CURRENT it was that worked.
> > >
> > > Then I'll need to know what version you were using that broke.
> > >
> > > I'm trying to get my AMD64 system built this weekend to test things.
> > >
> > > Sean
> >
> > Verbose dmesg from the working system:
> >
> > http://host7.net62.hdsl-213-169.fastbg.net/dmesg.working.txt
> >
> > Verbose dmesg from the broken system:
> >
> > http://host7.net62.hdsl-213-169.fastbg.net/dmesg.broken.txt
> >
> > (The cable was plugged in after the system had had already booted - the
> > output from the disk is found at the end.)
> >
> > Please, feel free to ask for more details, if necessary.
> >
> > Thanks,
> >
> > Boris Kotzev
>
> Looking over your logs, I can't quite see what the failure is.  There
> seems to be a format error, I'm just not sure what is being requested.
>
> Can you update to -current, and set:
> debug.sbp_debug = 1
> debug.firewire_debug = 1
>
> Then repost your dmesg.
>
> Sean

Hi,

The dmesg output after plugging the cable are as follows (full verbose dmesg can be
found at http://host7.net62.hdsl-213-169.fastbg.net/dmesg.debug.txt ):

fwohci0: fwohci_intr_core: BUS reset
sbp_post_busreset
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=3, CYCLEMASTER mode
node:0 link:1 gap:63 spd:2 con:0 pwr:4 p0:1 p1:2 p2:0 i:0 m:0
node:1 link:1 gap:5 spd:2 con:1 pwr:0 p0:3 p1:1 p2:1 i:1 m:0
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1)  (me) 
fwohci0: fwohci_set_bus_manager: 1->1 (loop=0)
firewire0: bus manager 1 
firewire0: fw_phy_config: root_node=1 gap_count=5
fwohci0: start AT DMA status=11
firewire0: fw_bus_probe:iterate and invalidate all nodes
firewire0: fw_explore:node(0) fc->max_node(1) found
firewire0: fw_explore:found myself node(1) fc->nodeid(1) fc->max_node(1)
firewire0: fw_explore_node: node(0) BUS INFO BLOCK:
irmc(0) cmc(0) isc(0) bmc(0) pmc(0) cyc_clk_acc(255) max_rec(5) max_rom(1) generation(1) link_spd(2)
firewire0: New S400 device ID:0020370004a03421
firewire0: fw_explore: node 2, err = 0
bus_explore done
sbp_post_explore (sbp_cold=1)
sbp0: sbp_post_explore:: EUI:0020370004a03421  attached, state=2
target 0 lun 0 found
sbp0: sbp_show_sdev_info: sbp0:0:0: ordered:1 type:0 EUI:0020370004a03421 node:0 speed:2 maxrec:0
sbp0: sbp_show_sdev_info: sbp0:0:0 'Seagate' 'ATA Device 00' '000102'
sbp_login: sec = 0 usec = 716226 ticks = 716
sbp0: sbp_mgm_orb:sbp0:0:0 LOGIN
sbp: alloc 1 xfer
fwohci0: fwohci_start: maxdesc 3
sbp0: sbp_recv1:sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0100000, recon_hold 0
sbp0: sbp_busy_timeout:sbp0:0:0
sbp0: sbp_agent_reset:sbp0:0:0
sbp0: sbp_do_attach:sbp0:0:0
sbp0: sbp_cam_scan_target:sbp0:0:0
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b532c8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53418
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sb(pp0r:o bseb0p:_sabgpe0n:t0_:r0e:s0e)t:: sRbepq0u:e0s:t0 R
equeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53568
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b536b8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53808
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t R
equeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53958
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53aa8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t R
equeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53bf8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sb(pp0r:o bseb0p:_sabgpe0n:t0_:r0e:s0e)t:: sRbepq0u:e0s:t0 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53d48
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53e98
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sb(pp0r:o bseb0p:_sabgpe0n:t0_:r0e:s0e)t:: sRbepq0u:e0s:t0 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53028
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sb(pp0r:o bseb0p:_sabgpe0n:t0_:r0e:s0e)t:: sRbepq0u:e0s:t0 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53178
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b532c8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t 
Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004b53418
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp(0p:r osbbep0_:asgbepn0t:_0r:e0s:e0t)::s bRpe0q:u0e:s0t R
equeued
(probe0:sbp0:0:0:0): Retrying Command

Best regards,

Boris Kotzev