This is where I'm going with fwcontrol

[Dieter]

In message <486ACB33.50204 at miralink.com>, Sean Bruno writes:

> > Here is a current diff against RELENG_7 which seems to be the same as 
> > -CURRENT.

fwcontrol.c: In function 'main':
fwcontrol.c:726: warning: comparison is always false due to limited range of data type

I changed priority_budget from int to long, is this the correct fix?

BUG:

+       if (adjust_gap_count)
+               send_phy_config(fd, adjust_gap_count, -1);

Since I need to set this to 0 (see PR 113785), the if() fails
and doesn't execute the send_phy_config().  I fixed this by
adding a seperate flag, need_to_send_adjust_gap_count.  Please
feel free to think up a better name for the flag.  :-)

NOTE: some of the other options have the same problem,
if the argument can be 0.  The patch below only fixes -f.

I did add some error checking, mostly for malloc.

With the patch below, -f, -r, -u, -S work for me.
FreeBSD 7.0 on AMD64, with the NEC fw controller.
I haven't tested -R yet, I suspect the VIA fw controller
still doesn't work.

===================================================================
RCS file: RCS/fwcontrol.c,v
retrieving revision 1.3
diff -u -r1.3 fwcontrol.c
--- fwcontrol.c	2008/08/05 23:16:45	1.3
+++ fwcontrol.c	2008/08/06 00:33:25
@@ -97,7 +97,7 @@
 get_dev(int fd, struct fw_devlstreq *data)
 {
 	if (data == NULL)
-		err(1, "malloc");
+	  err(1, "arg data is NULL");  /* probably due to failure of malloc in calling function */
 	if( ioctl(fd, FW_GDEVLST, data) < 0) {
        			err(1, "ioctl");
 	}
@@ -188,6 +188,8 @@
 	u_int32_t *qld, res;
 
         asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 16);
+	if (asyreq == NULL)
+	  err(1, "malloc");
 	asyreq->req.len = 16;
 #if 0
 	asyreq->req.type = FWASREQNODE;
@@ -226,6 +228,8 @@
         struct fw_asyreq *asyreq;
 
 	asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 12);
+	if (asyreq == NULL)
+	  err(1, "malloc");
 	asyreq->req.len = 12;
 	asyreq->req.type = FWASREQNODE;
 	asyreq->pkt.mode.ld[0] = 0;
@@ -251,6 +255,8 @@
         struct fw_asyreq *asyreq;
 
 	asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 12);
+	if (asyreq == NULL)
+	  err(1, "malloc");
 	asyreq->req.len = 12;
 	asyreq->req.type = FWASREQNODE;
 	asyreq->pkt.mode.common.tcode = FWTCODE_PHY;
@@ -268,6 +274,8 @@
         struct fw_asyreq *asyreq;
 
 	asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 16);
+	if (asyreq == NULL)
+	  err(1, "malloc");
 	asyreq->req.len = 16;
 	asyreq->req.type = FWASREQNODE;
 	asyreq->pkt.mode.wreqq.dst = FWLOCALBUS | (node & 0x3f);
@@ -643,7 +651,11 @@
 		err(1, "ioctl FW_SRSTREAM");
 
 	buf = (char *)malloc(1024*16);
+	if (buf == NULL)
+	  err(1, "malloc");
 	len = read(fd, buf, 1024*16);
+	if (len == -1)
+	  err(1, "read");
 	ptr = (u_int32_t *) buf;
 	ciph = (struct ciphdr *)(ptr + 1);
 
@@ -688,12 +700,13 @@
  * to iterate through
  */
 	int display_board_only = 0;
-	int priority_budget = 0;
+	long priority_budget = 0;
 	int display_crom = 0;
 	char *crom_string = NULL;
 	char *crom_string_hex = NULL;
 	int display_crom_hex = 0;
 	int adjust_gap_count = 0;
+	int need_to_send_adjust_gap_count = 0;
 	int reset_gap_count = 0;
 	int load_crom_from_file = 0;
 	int set_fwmem_target = 0;
@@ -731,6 +744,8 @@
 			break;
 		case 'c':
 			crom_string = malloc(strlen(optarg)+1);
+			if (crom_string == NULL)
+			  err(1, "malloc");
 			strcpy(crom_string, optarg);
 			display_crom = 1;
 			open_needed = 1;
@@ -739,6 +754,8 @@
 			break;
 		case 'd':
 			crom_string_hex = malloc(strlen(optarg)+1);
+			if (crom_string == NULL)
+			  err(1, "malloc");
 			strcpy(crom_string_hex, optarg);
 			display_crom_hex = 1;
 			open_needed = 1;
@@ -747,6 +764,7 @@
 			break;
 		case 'f':
 			adjust_gap_count = strtol(optarg, NULL, 0);
+			need_to_send_adjust_gap_count = 1;
 			open_needed = 1;
 			command_set = 1;
 			display_board_only = 0;
@@ -827,6 +845,8 @@
 			break;
 		case 'R':
 			recv_data = malloc(strlen(optarg)+1);
+			if (recv_data == NULL)
+			  err(1, "malloc");
 			strcpy(recv_data, optarg);
 			open_needed = 1;
 			command_set = 1;
@@ -834,6 +854,8 @@
 			break;
 		case 'S':
 			send_data = malloc(strlen(optarg)+1);
+			if (send_data == NULL)
+			  err(1, "malloc");
 			strcpy(send_data, optarg);
 			open_needed = 1;
 			display_board_only = 0;
@@ -904,8 +926,10 @@
 	/*
 	 * Adjust the gap count for this card/bus to value "-f"
 	 */
-	if (adjust_gap_count)
+	if (need_to_send_adjust_gap_count)
+	  {
 		send_phy_config(fd, adjust_gap_count, -1);
+	  }
 
 	/*
 	 * Reset the gap count for this card/bus  "-g"