virtualbox-ose 3.1.2 and 7.3-PRERELEASE

[{BBLister}]

> Hi there
>
> 02/02/2010 I had update my workstation from 7.2-STABLE to 
> 7.3-PRERELEASE. After install new kernel and world all installed ports 
> also was rebuilt too by portupgrade -af. Now, I have kernel panic 
> during attempt starts any virtual machine (Win or BSD) via GUI or 
> headless.
>
> Any suggestions are welcome.
>
> Thanks.
>
>
> Details:
>
>
>I've got additional info with last panic:
>
>Unread portion of the kernel message buffer:
>HHWWAACCCCMMRR00IInniittCCPPUU ccppuu 01
>
>HWACCMR0InitCPU failed with rc=-4013
>panic: vm_fault: fault on nofault entry, addr: c19ee000
>cpuid = 0
>Uptime: 28m29s
>Physical memory: 2026 MB
>Dumping 108 MB: 93 77 61 45 29 13




Hi,

I can confirm this. 
When I upgraded to 7.3-PRELEASE and virtualbox-ose 3.1.2 
I couldn't start ANY virtualbox machine, but immediately (in couple of secs)
my system panic.

I Upgraded to 8.0-STABLE   and still my machine panics with virtualbox-ose 3.1.2

I upgraded to 8.0-STABLE with Virtualbox-ose-devel (3.1.5) and I still have panics.

I downgraded port to virtualbox-3.0.51.r22902_3  and still my 8.0-STABLE
machine immediatelly panics.


Note that in 7.2-STABLE my virtualbox-3.0.51.r22902_3 run without any problem
with many months uptime.

How can I find out what were the changes from 7.2-STABLE to 7.3-PRELEASE ?


I have an "AMD Athlon(tm) Processor (1394.08-MHz 686-class CPU)"



I always use the VBoxHeadless (no output on screen).



my dmesg follows:





Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #1: Thu Feb 11 10:56:50 EET 2010
    root at bigb4.homeftp.net:/usr/obj/usr/src/sys/bigb4 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1394.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
real memory  = 1073741824 (1024 MB)
avail memory = 1041551360 (993 MB)
acpi0: <AMIINT AMIINT10> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xce000000-0xceffffff,0xc0000000-0xc7fff
fff irq 5 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <serial bus, USB> at device 2.3 (no driver attached)
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 2.7 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xd400-0xd43f mem 0xcffa0000-0xcffbffff,0xcff80000-0xcff9ffff irq 5 at device 15.0 on pci0
em0: [FILTER]
em0: Ethernet address: 00:1b:21:17:0a:24
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcb800-0xcc7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
Timecounter "TSC" frequency 1394075922 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, nat loadable, rule-based forwarding enabled, default to accept, logging disabled
ad0: 38166MB <Maxtor 5T040H4 TAH71DP0> at ata0-master UDMA100
GEOM: ad0: partition 1 does not ad1: 156334MB <Maxtor 6Y160P0 YAR41BW0> at ata0-slave UDMA100
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcb800-0xcc7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
Timecounter "TSC" frequency 1394075922 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, nat loadable, rule-based forwarding enabled, default to accept, logging disabled
ad0: 38166MB <Maxtor 5T040H4 TAH71DP0> at ata0-master UDMA100
GEOM: ad0: partition 1 does not ad1: 156334MB <Maxtor 6Y160P0 YAR41BW0> at ata0-slave UDMA100
start on a track boundary.
GEOM: ad0: partition 1 does not end on a track boundary.
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,255s).
GEOM: ad1: partition 1 does not start on a track boundary.
GEOM: ad1: partition 1 does not end on a track boundary.
GEOM: ad1s1: geometry does not match label (255h,63s != 15h,255s).
Trying to mount root from ufs:/dev/ad0s1a