Problem with FreeBSD port (re-post)

[Mario Lobo]

Hi;

I've been following the FreeBSD port through svn.bluelife.at.

Up to revision 508, everything was fine. On Rev 519 (or before, i'm not sure), 
the port was split into 3. virtualbox, virtualbox-additions and virtualbox-
kmod.


There is no problem building virtualbox-kmod. and virtualbox. The modules load 
without errors and virtualbox starts fine. But when I try to start a VM I get 
this:

00:00:00.644 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-
cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to open the 
host network interface re0} aWarning=false, preserve=false

00:00:00.654 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-
cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to initialize 
Host Interface Networking (VERR_HOSTIF_INIT_FAILED).

00:00:00.654 Unknown error creating VM (VERR_HOSTIF_INIT_FAILED)} 
aWarning=false, preserve=false

00:00:00.658 Power up failed (vrc=VERR_HOSTIF_INIT_FAILED, rc=NS_ERROR_FAILURE 
(0X80004005))

Neither "Bridge adapter" or "host only" are avaliable anymore.


kldstat
Id Refs Address            Size     Name
 1   60 0xffffffff80100000 caeef0   kernel
 2    2 0xffffffff80daf000 41110    linux.ko
 3    1 0xffffffff80df1000 3ec0     ng_ether.ko
 4    3 0xffffffff80df5000 14d78    netgraph.ko
 5    1 0xffffffff80e0a000 5b58     snd_cmi.ko
 6    3 0xffffffff80e10000 755a8    sound.ko
 7    1 0xffffffff80e86000 27d8     amdtemp.ko
 8    1 0xffffffff80e89000 3e20     amdsmb.ko
 9    2 0xffffffff80e8d000 24d8     smbus.ko
10    2 0xffffffff80e90000 227d8    drm.ko
11    2 0xffffffff80eb3000 12c88    agp.ko
12    1 0xffffffff80ec6000 712e0    radeon.ko
13    3 0xffffffff80f38000 41070    vboxdrv.ko
14    2 0xffffffff80f7a000 6c40     vboxnetflt.ko
15    1 0xffffffff80f81000 25e8     vboxnetadp.ko
16    1 0xffffffff80f84000 5278     atapicam.ko
17    1 0xffffffff80f8a000 fff0     cpufreq.ko
18    1 0xffffffff81022000 3983     linprocfs.ko
19    1 0xffffffff81026000 a8ca     fuse.ko
20    1 0xffffffff81031000 b5b2     ext2fs.ko

[~]>ifconfig
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
        ether 00:19:66:d7:a3:45
        inet 10.10.10.2 netmask 0xffffff00 broadcast 10.10.10.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
vboxnet0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 0a:00:27:00:00:00
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet 127.0.0.1 netmask 0xff000000


It is as if virtualbox can't "see" that the modules ARE loaded, and "connect" 
to them.

If I revert to the previous version (with the modules compiled together with 
virtualbox - ports/emulators/virtualbox/Makefile,v 1.3 2009/06/15 22:24:42 nox 
Exp $), everything works again.

OS:
 FreeBSD 8.0-RC1 #0: Sat Oct 10 16:16:42 BRT 2009 amd64

Any suggestions?

Thanks,
-- 
Mario Lobo
http://www.mallavoodoo.com.br
FreeBSD since version 2.2.8 [not Pro-Audio.... YET!!] (99,7% winedows FREE)