flash10 vs f10
Juergen Lock
nox at jelal.kn-bremen.de
Sat Jun 27 21:38:15 UTC 2009
On Sat, Jun 27, 2009 at 08:10:10PM +0400, Boris Samorodov wrote:
> Juergen Lock <nox at jelal.kn-bremen.de> writes:
> > On Fri, Jun 26, 2009 at 03:33:15PM -0500, Sean C. Farley wrote:
> >> On Fri, 26 Jun 2009, Renato Botelho wrote:
> >>
> >> > On Fri, Jun 26, 2009 at 4:32 PM, Boris Samorodov<bsam at ipt.ru> wrote:
> >> >> OK, thanks! I should have missed you previous post.
> >> >>
> >> >> Here is a port for tests. This shar should be run at /usr/ports/www:
> >> >> ftp://ftp.ipt.ru/pub/linux/linux-f10-flashplugin10.shar
> >> >>
> >> >> Note: the port is only hand-written and tested to build/install/deinstall.
> >> >
> >> > I tried it and got this message:
> >> >
> >> > *** NSPlugin Wrapper *** ERROR: NPP_New() wait for reply: Message timeout
> >> >
> >> > My environment:
> >> >
> >> > FreeBSD botelhor.bplab.local 8.0-CURRENT FreeBSD 8.0-CURRENT #73
> >> > r194284: Wed Jun 24 19:09:04 BRT 2009
> >> > root at botelhor.bplab.local:/usr/obj/usr/src/sys/GARGA i386
> >> >
> >> > linux-f10-atk-1.24.0
> >> > linux-f10-cairo-1.8.0
> >> > linux-f10-curl-7.19.4_1
> >> > linux-f10-expat-2.0.1
> >> > linux-f10-flashplugin-10.0r22
> >> > linux-f10-fontconfig-2.6.0
> >> > linux-f10-gtk2-2.14.7
> >> > linux-f10-jpeg-6b
> >> > linux-f10-libssh2-0.18
> >> > linux-f10-nspr-4.7.3
> >> > linux-f10-nss-3.12.2.0
> >> > linux-f10-openssl-0.9.8g
> >> > linux-f10-pango-1.22.3
> >> > linux-f10-png-1.2.35
> >> > linux-f10-sqlite3-3.5.9
> >> > linux-f10-tiff-3.8.2
> >> > linux-f10-xorg-libs-7.4
> >> > linux_base-f10-10
> >> > nspluginwrapper-1.2.2_2
> >> >
> >> > I deinstalled linux-f8, cleaned compat/linux and reinstalled everything.
> >>
> >> Assuming it is the issue with missing dependencies for libcurl, we also
> >> need port(s) for liblber and libldap since f10's libcurl depends upon
> >> them.
> >
> > liblber is in the same rpm with libldap (I used
> > openldap-2.4.12-1.fc10.i386.rpm as I said), and as I said we
> > also need libsasl2 (libldap depends on it) which is in
> > cyrus-sasl-lib-2.1.22-19.fc10.i386.rpm .
> >
> >> I had to manually extract a couple of RPM's to get them. Here is
> >> the ldd output of libcurl for me:
> >>
> >> # /compat/linux/bin/sh /compat/linux/usr/bin/ldd /compat/linux/usr/lib/libcurl.so.4.1.1
> >> libidn.so.11 => /lib/libidn.so.11 (0x20073000)
> >> libssh2.so.1 => /usr/lib/libssh2.so.1 (0x200a5000)
> >> libldap-2.4.so.2 => /usr/lib/libldap-2.4.so.2 (0x200c7000)
> >> librt.so.1 => /lib/librt.so.1 (0x20109000)
> >> libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x20113000)
> >> libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x20141000)
> >> libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x201e1000)
> >> libcom_err.so.2 => /lib/libcom_err.so.2 (0x20206000)
> >> libz.so.1 => /lib/libz.so.1 (0x20209000)
> >> libssl3.so => /lib/libssl3.so (0x2021d000)
> >> libsmime3.so => /lib/libsmime3.so (0x2024e000)
> >> libnss3.so => /lib/libnss3.so (0x20275000)
> >> libplds4.so => /lib/libplds4.so (0x203bb000)
> >> libplc4.so => /lib/libplc4.so (0x203bf000)
> >> libnspr4.so => /lib/libnspr4.so (0x203c4000)
> >> libpthread.so.0 => /lib/libpthread.so.0 (0x203fe000)
> >> libdl.so.2 => /lib/libdl.so.2 (0x20418000)
> >> libc.so.6 => /lib/libc.so.6 (0x2041d000)
> >> libssl.so.7 => /lib/libssl.so.7 (0x20596000)
> >> libcrypto.so.7 => /lib/libcrypto.so.7 (0x205e1000)
> >> liblber-2.4.so.2 => /usr/lib/liblber-2.4.so.2 (0x20735000)
> >> libresolv.so.2 => /lib/libresolv.so.2 (0x20744000)
> >> libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x2075b000)
> >> /lib/ld-linux.so.2 (0x00000000)
> >> libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x20775000)
> >> libkeyutils.so.1 => /lib/libkeyutils.so.1 (0x2077f000)
> >> libnssutil3.so => /lib/libnssutil3.so (0x20782000)
> >> libcrypt.so.1 => /lib/libcrypt.so.1 (0x2079b000)
> >> libselinux.so.1 => /lib/libselinux.so.1 (0x207cf000)
> >
> > Same here with the following ports I just tested here: (thanx to bsam
> > for the linux-f10-flashplugin10 port and to Peter Jeremy for the
> > original linux-f10-openldap and linux-f10-cyrus-sasl2 ports!)
> >
> > First a patch for bsd.linux-apps.mk, then the shar, please test
> > and comment :)
>
> Good work! Here are some comments.
>
> > Index: Mk/bsd.linux-apps.mk
> > @@ -70,7 +70,8 @@
> > _LINUX_APPS_ALL+=
> >
> > # 2.6.16 components
> > -_LINUX_26_APPS= libidn libssh2 nspr nss sqlite3 tcl84 tk84
> > +_LINUX_26_APPS= cyrus-sasl2 libidn libssh2 nspr nss openldap \
> > + sqlite3 tcl84 tk84
> >
> > _LINUX_APPS_ALL+= ${_LINUX_26_APPS}
> >
> > @@ -137,6 +138,11 @@
> > curl_DETECT= ${curl${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
> > curl_PORT= ${PORTSDIR}/ftp/linux${LINUX_DIST_SUFFIX}-curl
>
> Since linux-f10 curl requires cyrus-sasl2 and openldap I'd add here:
> -----
> . if ${LINUX_DIST_SUFFIX} == "-f10"
> curl_DEPENDS=cyrus-sasl2 openldap
> . endif
> -----
>
> Also apropriate changes should go to ftp/linux-f10-curl port.
>
Right.
> > +# no cyrus-sasl2_FILE, cyrus-sasl2_f8_FILE
> > +cyrus-sasl2_f10_FILE= ${LINUXBASE}/usr/lib/libsasl2.so.2.0.22
> > +cyrus-sasl2_DETECT= ${cyrus-sasl2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
> > +cyrus-sasl2_PORT= ${PORTSDIR}/security/linux${LINUX_DIST_SUFFIX}-cyrus-sasl2
> > +
> > dri_FILE= ${LINUXBASE}/usr/X11R6/lib/libGL.so.1
> > dri_f8_FILE= ${LINUXBASE}/usr/lib/libGL.so.1
> > dri_f10_FILE= ${LINUXBASE}/usr/lib/libGL.so.1.2
> > @@ -307,6 +313,11 @@
> > mikmod_DETECT= ${mikmod${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
> > mikmod_PORT= ${PORTSDIR}/audio/linux${LINUX_DIST_SUFFIX}-mikmod
> >
> > +# no openldap_FILE, openldap_f8_FILE
> > +openldap_f10_FILE= ${LINUXBASE}/usr/lib/libldap-2.4.so.2.2.0
> > +openldap_DETECT= ${openldap${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
> > +openldap_PORT= ${PORTSDIR}/net/linux${LINUX_DIST_SUFFIX}-openldap
> > +
> > openmotif_FILE= ${LINUXBASE}/usr/X11R6/lib/libXm.so.3.0.3
> > openmotif_f8_FILE= ${LINUXBASE}/usr/lib/libXm.so.4.0.2
> > openmotif_f10_FILE= ${LINUXBASE}/usr/X11R6/lib/libXm.so.3.0.3
> >
> > # This is a shell archive. Save it in a file, remove anything before
> > # this line, and then unpack it by entering "sh file". Note, it may
> > # create directories; files and directories will be owned by you and
> > # have default permissions.
> > #
> > # This archive contains:
> > #
> > # net/linux-f10-openldap/
> > # net/linux-f10-openldap/Makefile
> > # net/linux-f10-openldap/distinfo.i386
> > # security/linux-f10-cyrus-sasl2/
> > # security/linux-f10-cyrus-sasl2/Makefile
> > # security/linux-f10-cyrus-sasl2/distinfo.i386
> > # www/linux-f10-flashplugin10/
> > # www/linux-f10-flashplugin10/Makefile
> > # www/linux-f10-flashplugin10/distinfo
> > # www/linux-f10-flashplugin10/pkg-descr
> > # www/linux-f10-flashplugin10/pkg-plist
> > #
> > echo c - net/linux-f10-openldap/
> > mkdir -p net/linux-f10-openldap/ > /dev/null 2>&1
> > echo x - net/linux-f10-openldap/Makefile
> > sed 's/^X//' >net/linux-f10-openldap/Makefile << '17a12d65b66950d2cbc504ac86a37255'
> > X# New ports collection makefile for: net/linux-f10-openldap
> > X# Date created: 2009-06-07
> > X# Whom: peter
> > X#
> > X# $FreeBSD$
> > X#
> > X
> > XPORTNAME= openldap
> > XPORTVERSION= 2.4.12
> > XCATEGORIES= net linux
> > XPKGNAMEPREFIX= linux-f10-
> > XDISTNAME= ${PORTNAME}-${PORTVERSION}-${RPMVERSION}
> > X
> > X.if defined(PACKAGE_BUILDING)
> > XSRC_DISTFILES= ${PORTNAME}-${PORTVERSION}-${RPMVERSION}.src.rpm
> > XALWAYS_KEEP_DISTFILES= YES
> > X.endif
>
> Well, those <.if, .endif> actually are not needed as bsd.linux-rpm.mk
> should itself take care of the case. If it doesn't, please tell me.
>
Ah, then a bunch of other ports can be changed too... (I guess Peter
just went by existing examples :)
> > X
> > XMAINTAINER= emulation at FreeBSD.org
> > XCOMMENT= Lightweight Directory Access Protocol libraries (Linux Fedora 10)
> > X
> > X#CONFLICTS=
> > X
> > XUSE_LINUX_RPM= yes
> > XLINUX_DIST_VER= 10
> > XRPMVERSION= 1.fc10
> > XUSE_LDCONFIG= yes
> > XDESCR= ${.CURDIR}/../openldap24-server/pkg-descr
> > X
> > XPLIST_DIRS= etc/openldap/cacerts etc/openldap
>
> I'd say only etc/openldap is needed (see below).
>
> > XPLIST_FILES= etc/openldap/ldap.conf usr/lib/liblber-2.4.so.2 usr/lib/liblber-2.4.so.2.2.0 usr/lib/libldap-2.4.so.2 usr/lib/libldap-2.4.so.2.2.0 usr/lib/libldap_r-2.4.so.2 usr/lib/libldap_r-2.4.so.2.2.0
> > XDOCSDIR= usr/share/doc/${PORTNAME}-${PORTVERSION}
> > XPORTDOCS= ANNOUNCEMENT CHANGES COPYRIGHT LICENSE README
> > XMANPREFIX= ${PREFIX}/usr/share
> > XMAN5= ldap.conf.5 ldif.5
> > XMANCOMPRESSED= yes
>
> At my port's propotype I have this:
> -----
> # do not install any openldap configuration directories/files
> post-extract:
> ${RM} -rf ${WRKSRC}/etc
>
> # use a native openldap configuration directories/files
> post-install:
> ${LN} -sf ${LOCALBASE}/etc/openldap ${PREFIX}/etc
> -----
>
> This should work for managing the port via ports system but not with
> packages.
>
Good idea, but actually the post-install target isn't really needed
since the linuxolator /compat/linux search magic should already dtrt
here. (I.e. if the dir doesn't exits it should fall back to the one
outside of /compat/linux.)
> > X
> > X.include <bsd.port.mk>
> > 17a12d65b66950d2cbc504ac86a37255
> > echo x - net/linux-f10-openldap/distinfo.i386
> > sed 's/^X//' >net/linux-f10-openldap/distinfo.i386 << 'f422178bbd4668750265f4e584e91c0e'
> > XMD5 (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.i386.rpm) = e3ea12058a8cdc54d6f270c802c92a00
> > XSHA256 (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.i386.rpm) = 2a71dcfdbfb1dc9b4e056c951518474d5958147c033f3584dc06e784fd67d567
> > XSIZE (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.i386.rpm) = 323504
>
> The following commands would do the right thing (no src distinfo for
> now):
> -----
> % cd <the port directory>
> % sudo make fetch PACKAGE_BUILDING=YES
> % sudo make makesum PACKAGE_BUILDING=YES
> -----
>
Done. (Actually makesum depends on fetch :)
> > f422178bbd4668750265f4e584e91c0e
> > echo c - security/linux-f10-cyrus-sasl2/
> > mkdir -p security/linux-f10-cyrus-sasl2/ > /dev/null 2>&1
> > echo x - security/linux-f10-cyrus-sasl2/Makefile
> > sed 's/^X//' >security/linux-f10-cyrus-sasl2/Makefile << '4fc58bcf97a8889077c61da23cb55faa'
> > X# New ports collection makefile for: security/linux-f10-cyrus-sasl2
> > X# Date created: 2009-06-07
> > X# Whom: peter
> > X#
> > X# $FreeBSD$
> > X#
> > X
> > XPORTNAME= cyrus-sasl2
> > XPORTVERSION= 2.1.22
> > XCATEGORIES= security linux
> > XPKGNAMEPREFIX= linux-f10-
> > XDISTNAME= cyrus-sasl-lib-${PORTVERSION}-${RPMVERSION}
> > X
> > X.if defined(PACKAGE_BUILDING)
> > XSRC_DISTFILES= cyrus-sasl-lib-${PORTVERSION}-${RPMVERSION}.src.rpm
> > XALWAYS_KEEP_DISTFILES= YES
> > X.endif
>
> This is not right. I propose to add (somewhere further) instead
> of the last four lines:
> -----
> SRC_DISTFILES=cyrus-sasl-${PORTVERSION}-${RPMVERSION}.src.rpm
> -----
>
Done.
> > X
> > XMAINTAINER= emulation at FreeBSD.org
> > XCOMMENT= RFC 2222 SASL (Simple Authentication and Security Layer) (Linux Fedora 10)
> > X
> > X#CONFLICTS=
> > X
> > XUSE_LINUX_RPM= yes
> > XLINUX_DIST_VER= 10
> > XRPMVERSION= 19.fc10
> > XUSE_LDCONFIG= yes
> > XBRANDELF_FILES= usr/sbin/sasldblistusers2 usr/sbin/saslpasswd2
> > XDESCR= ${.CURDIR}/../${PORTNAME}/pkg-descr
> > X
> > XPLIST_DIRS= etc/sasl2 usr/lib/sasl2
> > XPLIST_FILES= usr/lib/libsasl2.so.2 usr/lib/libsasl2.so.2.0.22 usr/lib/sasl2/libanonymous.so usr/lib/sasl2/libanonymous.so.2 usr/lib/sasl2/libanonymous.so.2.0.22 usr/lib/sasl2/libsasldb.so usr/lib/sasl2/libsasldb.so.2 usr/lib/sasl2/libsasldb.so.2.0.22 usr/sbin/sasldblistusers2 usr/sbin/saslpasswd2
> > XDOCSDIR= usr/share/doc/cyrus-sasl-lib-${PORTVERSION}
> > XPORTDOCS= AUTHORS COPYING NEWS README advanced.html appconvert.html components.html gssapi.html index.html install.html macosx.html mechanisms.html options.html plugprog.html programming.html readme.html sysadmin.html upgrading.html windows.html
> > X
> > X.include <bsd.port.mk>
> > 4fc58bcf97a8889077c61da23cb55faa
> > echo x - security/linux-f10-cyrus-sasl2/distinfo.i386
> > sed 's/^X//' >security/linux-f10-cyrus-sasl2/distinfo.i386 << '9c7e54bf867023e1f8fcaa16319c72f4'
> > XMD5 (rpm/i386/fedora/10/cyrus-sasl-lib-2.1.22-19.fc10.i386.rpm) = 5a4ee3c84ec9581723fd56b658eec994
> > XSHA256 (rpm/i386/fedora/10/cyrus-sasl-lib-2.1.22-19.fc10.i386.rpm) = ae8da4ee07615519c657ddbe3b8c128a2e81f00a4db0da17b7369dabe03ed6d2
> > XSIZE (rpm/i386/fedora/10/cyrus-sasl-lib-2.1.22-19.fc10.i386.rpm) = 145305
> > 9c7e54bf867023e1f8fcaa16319c72f4
>
> The same comment about distinfo as for net/linux-f10-openldap.
>
Yup.
> > echo c - www/linux-f10-flashplugin10/
> > mkdir -p www/linux-f10-flashplugin10/ > /dev/null 2>&1
> > echo x - www/linux-f10-flashplugin10/Makefile
> > sed 's/^X//' >www/linux-f10-flashplugin10/Makefile << '5455d901d257b50d731e64397ea6df2f'
> > X# New ports collection makefile for: www/linux-f10-flashplugin10
>
> This port should be probably first repocopied from
> www/linux-f8-flashplugin10 and then committed.
>
True... I'll do the PR.
> > X# Date created: 2009-06-26
> > X# Whom: bsam
> > X# Based on: www/linux-f8-flashplugin10 by nox@
> > X#
> > X# $FreeBSD$
> > X#
> > X
> > XPORTNAME= flashplugin
> > XPORTVERSION= 10.0r22
> > XCATEGORIES= www multimedia linux
> > XMASTER_SITES= http://fpdownload.macromedia.com/get/flashplayer/current/:plugin \
> > X ftp://ftp.ipt.ru/pub/download/:suplib
> > XPKGNAMEPREFIX= linux-f10-
> > XDISTFILES= install_flash_player_10_linux.tar.gz:plugin \
> > X linux-f10-flashsupport-9.0.1.i386.tar.gz:suplib
> > XDIST_SUBDIR= ${PORTNAME}/${PORTVERSION}
> > X
> > XMAINTAINER= emulation at FreeBSD.org
> > XCOMMENT= Adobe Flash Player NPAPI Plugin
> > X
> > XONLY_FOR_ARCHS= amd64 i386
> > XUSE_LINUX= yes
> > XUSE_LINUX_APPS= openssl curl cyrus-sasl2 libssh2 nspr nss openldap
> > X
> > XRESTRICTED= Redistribution not allowed
> > XRESTRICTED_FILES= ${DISTFILES:Nlinux-f10-flashsupport*:C/:[^:]+$//}
> > X
> > XNO_BUILD= yes
> > XWRKSRC= ${WRKDIR}/install_flash_player_10_linux
> > X
> > XUSE_NPAPI= linux-*
> > XNPAPI_FILES= libflashplayer.so
> > X
> > XCONFLICTS= linux-flashplugin-7* linux-flashplugin-9* linux-f8-flashplugin10-*
> > X
> > Xpost-install:
> > X @${INSTALL_PROGRAM} ${WRKDIR}/libflashsupport.so ${LINUXBASE}/usr/lib
> > X
> > X.include <bsd.port.pre.mk>
> > X.include "${PORTSDIR}/www/linux-mplayer-plugin/Makefile.npapi"
> > X.include <bsd.port.post.mk>
> > 5455d901d257b50d731e64397ea6df2f
> > echo x - www/linux-f10-flashplugin10/distinfo
> > sed 's/^X//' >www/linux-f10-flashplugin10/distinfo << '1f552e2e0c05a396106217e48ff92103'
> > XMD5 (flashplugin/10.0r22/install_flash_player_10_linux.tar.gz) = 23e4c2b844db0f87ff62084178aa2b1f
> > XSHA256 (flashplugin/10.0r22/install_flash_player_10_linux.tar.gz) = cd29f166c87fecc943e88fe951bb61c56728fab12b4bf343badafa73ea95394e
> > XSIZE (flashplugin/10.0r22/install_flash_player_10_linux.tar.gz) = 3994294
> > XMD5 (flashplugin/10.0r22/linux-f10-flashsupport-9.0.1.i386.tar.gz) = 6e416c81497f65065d78dae1e0acad0d
> > XSHA256 (flashplugin/10.0r22/linux-f10-flashsupport-9.0.1.i386.tar.gz) = 4a309b1a326bd2212cc72480628659e5a7fd61d9e0572cb7350c206f030955bf
> > XSIZE (flashplugin/10.0r22/linux-f10-flashsupport-9.0.1.i386.tar.gz) = 3455
> > 1f552e2e0c05a396106217e48ff92103
> > echo x - www/linux-f10-flashplugin10/pkg-descr
> > sed 's/^X//' >www/linux-f10-flashplugin10/pkg-descr << '57a1420ff5e8cb1b77c71ecb3a15c599'
> > XThis is the official Flash Player from Adobe. This plugin enables
> > Xyou to see .swf and .spl files on the 'net from your Opera, Mozilla or
> > XFirefox sessions.
> > X
> > XPlease see the Adobe home page for more information.
> > X
> > XFreeBSD Flash License Agreement:
> > X http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/96374
> > X
> > XWWW: http://www.adobe.com/
> > 57a1420ff5e8cb1b77c71ecb3a15c599
> > echo x - www/linux-f10-flashplugin10/pkg-plist
> > sed 's/^X//' >www/linux-f10-flashplugin10/pkg-plist << '9254ee58cdc375ce93f8fc3b1afc9e77'
> > X at cwd /compat/linux
> > Xusr/lib/libflashsupport.so
> > X at cwd
> > 9254ee58cdc375ce93f8fc3b1afc9e77
> > exit
>
> There may be something more, but I don't see it right now. Thanks for
> all involved! It's a good team work.
New patch and shar below:
Index: Mk/bsd.linux-apps.mk
@@ -70,7 +70,8 @@
_LINUX_APPS_ALL+=
# 2.6.16 components
-_LINUX_26_APPS= libidn libssh2 nspr nss sqlite3 tcl84 tk84
+_LINUX_26_APPS= cyrus-sasl2 libidn libssh2 nspr nss openldap \
+ sqlite3 tcl84 tk84
_LINUX_APPS_ALL+= ${_LINUX_26_APPS}
@@ -136,6 +137,14 @@
curl_f10_FILE= ${LINUXBASE}/usr/lib/libcurl.so.4.1.1
curl_DETECT= ${curl${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
curl_PORT= ${PORTSDIR}/ftp/linux${LINUX_DIST_SUFFIX}-curl
+. if ${LINUX_DIST_SUFFIX} == "-f10"
+curl_DEPENDS= cyrus-sasl2 openldap
+. endif
+
+# no cyrus-sasl2_FILE, cyrus-sasl2_f8_FILE
+cyrus-sasl2_f10_FILE= ${LINUXBASE}/usr/lib/libsasl2.so.2.0.22
+cyrus-sasl2_DETECT= ${cyrus-sasl2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
+cyrus-sasl2_PORT= ${PORTSDIR}/security/linux${LINUX_DIST_SUFFIX}-cyrus-sasl2
dri_FILE= ${LINUXBASE}/usr/X11R6/lib/libGL.so.1
dri_f8_FILE= ${LINUXBASE}/usr/lib/libGL.so.1
@@ -307,6 +316,11 @@
mikmod_DETECT= ${mikmod${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
mikmod_PORT= ${PORTSDIR}/audio/linux${LINUX_DIST_SUFFIX}-mikmod
+# no openldap_FILE, openldap_f8_FILE
+openldap_f10_FILE= ${LINUXBASE}/usr/lib/libldap-2.4.so.2.2.0
+openldap_DETECT= ${openldap${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
+openldap_PORT= ${PORTSDIR}/net/linux${LINUX_DIST_SUFFIX}-openldap
+
openmotif_FILE= ${LINUXBASE}/usr/X11R6/lib/libXm.so.3.0.3
openmotif_f8_FILE= ${LINUXBASE}/usr/lib/libXm.so.4.0.2
openmotif_f10_FILE= ${LINUXBASE}/usr/X11R6/lib/libXm.so.3.0.3
Index: ftp/linux-f10-curl/Makefile
@@ -24,6 +24,7 @@
CONFLICTS= linux-curl-[0-9]* linux-f8-curl-[0-9]*
USE_LINUX_RPM= yes
+USE_LINUX_APPS= cyrus-sasl2 openldap
LINUX_DIST_VER= 10
RPMVERSION= 5.fc10
USE_LDCONFIG= yes
# This is a shell archive. Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file". Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
# net/linux-f10-openldap/
# net/linux-f10-openldap/Makefile
# net/linux-f10-openldap/distinfo.i386
# security/linux-f10-cyrus-sasl2/
# security/linux-f10-cyrus-sasl2/Makefile
# security/linux-f10-cyrus-sasl2/distinfo.i386
# www/linux-f10-flashplugin10/
# www/linux-f10-flashplugin10/Makefile
# www/linux-f10-flashplugin10/distinfo
# www/linux-f10-flashplugin10/pkg-descr
# www/linux-f10-flashplugin10/pkg-plist
#
echo c - net/linux-f10-openldap/
mkdir -p net/linux-f10-openldap/ > /dev/null 2>&1
echo x - net/linux-f10-openldap/Makefile
sed 's/^X//' >net/linux-f10-openldap/Makefile << '17a12d65b66950d2cbc504ac86a37255'
X# New ports collection makefile for: net/linux-f10-openldap
X# Date created: 2009-06-07
X# Whom: peter
X#
X# $FreeBSD$
X#
X
XPORTNAME= openldap
XPORTVERSION= 2.4.12
XCATEGORIES= net linux
XPKGNAMEPREFIX= linux-f10-
XDISTNAME= ${PORTNAME}-${PORTVERSION}-${RPMVERSION}
X
XSRC_DISTFILES= ${PORTNAME}-${PORTVERSION}-${RPMVERSION}.src.rpm
X
XMAINTAINER= emulation at FreeBSD.org
XCOMMENT= Lightweight Directory Access Protocol libraries (Linux Fedora 10)
X
X#CONFLICTS=
X
XUSE_LINUX_RPM= yes
XLINUX_DIST_VER= 10
XRPMVERSION= 1.fc10
XUSE_LDCONFIG= yes
XDESCR= ${.CURDIR}/../openldap24-server/pkg-descr
X
XPLIST_FILES= etc/openldap/ldap.conf usr/lib/liblber-2.4.so.2 usr/lib/liblber-2.4.so.2.2.0 usr/lib/libldap-2.4.so.2 usr/lib/libldap-2.4.so.2.2.0 usr/lib/libldap_r-2.4.so.2 usr/lib/libldap_r-2.4.so.2.2.0
XDOCSDIR= usr/share/doc/${PORTNAME}-${PORTVERSION}
XPORTDOCS= ANNOUNCEMENT CHANGES COPYRIGHT LICENSE README
XMANPREFIX= ${PREFIX}/usr/share
XMAN5= ldap.conf.5 ldif.5
XMANCOMPRESSED= yes
X
X# do not install any openldap configuration directories/files
Xpost-extract:
X ${RM} -rf ${WRKSRC}/etc
X
X.include <bsd.port.mk>
17a12d65b66950d2cbc504ac86a37255
echo x - net/linux-f10-openldap/distinfo.i386
sed 's/^X//' >net/linux-f10-openldap/distinfo.i386 << 'f422178bbd4668750265f4e584e91c0e'
XMD5 (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.i386.rpm) = e3ea12058a8cdc54d6f270c802c92a00
XSHA256 (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.i386.rpm) = 2a71dcfdbfb1dc9b4e056c951518474d5958147c033f3584dc06e784fd67d567
XSIZE (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.i386.rpm) = 323504
XMD5 (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.src.rpm) = f28ec039fad4f81abc6df09c5542bdaa
XSHA256 (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.src.rpm) = 84bff280805bf046849d96ba80bd6b0d0da895da07f0e6d6efde2667b4ff1e1c
XSIZE (rpm/i386/fedora/10/openldap-2.4.12-1.fc10.src.rpm) = 16905121
f422178bbd4668750265f4e584e91c0e
echo c - security/linux-f10-cyrus-sasl2/
mkdir -p security/linux-f10-cyrus-sasl2/ > /dev/null 2>&1
echo x - security/linux-f10-cyrus-sasl2/Makefile
sed 's/^X//' >security/linux-f10-cyrus-sasl2/Makefile << '4fc58bcf97a8889077c61da23cb55faa'
X# New ports collection makefile for: security/linux-f10-cyrus-sasl2
X# Date created: 2009-06-07
X# Whom: peter
X#
X# $FreeBSD$
X#
X
XPORTNAME= cyrus-sasl2
XPORTVERSION= 2.1.22
XCATEGORIES= security linux
XPKGNAMEPREFIX= linux-f10-
XDISTNAME= cyrus-sasl-lib-${PORTVERSION}-${RPMVERSION}
X
XSRC_DISTFILES= cyrus-sasl-${PORTVERSION}-${RPMVERSION}.src.rpm
X
XMAINTAINER= emulation at FreeBSD.org
XCOMMENT= RFC 2222 SASL (Simple Authentication and Security Layer) (Linux Fedora 10)
X
X#CONFLICTS=
X
XUSE_LINUX_RPM= yes
XLINUX_DIST_VER= 10
XRPMVERSION= 19.fc10
XUSE_LDCONFIG= yes
XBRANDELF_FILES= usr/sbin/sasldblistusers2 usr/sbin/saslpasswd2
XDESCR= ${.CURDIR}/../${PORTNAME}/pkg-descr
X
XPLIST_DIRS= etc/sasl2 usr/lib/sasl2
XPLIST_FILES= usr/lib/libsasl2.so.2 usr/lib/libsasl2.so.2.0.22 usr/lib/sasl2/libanonymous.so usr/lib/sasl2/libanonymous.so.2 usr/lib/sasl2/libanonymous.so.2.0.22 usr/lib/sasl2/libsasldb.so usr/lib/sasl2/libsasldb.so.2 usr/lib/sasl2/libsasldb.so.2.0.22 usr/sbin/sasldblistusers2 usr/sbin/saslpasswd2
XDOCSDIR= usr/share/doc/cyrus-sasl-lib-${PORTVERSION}
XPORTDOCS= AUTHORS COPYING NEWS README advanced.html appconvert.html components.html gssapi.html index.html install.html macosx.html mechanisms.html options.html plugprog.html programming.html readme.html sysadmin.html upgrading.html windows.html
X
X.include <bsd.port.mk>
4fc58bcf97a8889077c61da23cb55faa
echo x - security/linux-f10-cyrus-sasl2/distinfo.i386
sed 's/^X//' >security/linux-f10-cyrus-sasl2/distinfo.i386 << '9c7e54bf867023e1f8fcaa16319c72f4'
XMD5 (rpm/i386/fedora/10/cyrus-sasl-lib-2.1.22-19.fc10.i386.rpm) = 5a4ee3c84ec9581723fd56b658eec994
XSHA256 (rpm/i386/fedora/10/cyrus-sasl-lib-2.1.22-19.fc10.i386.rpm) = ae8da4ee07615519c657ddbe3b8c128a2e81f00a4db0da17b7369dabe03ed6d2
XSIZE (rpm/i386/fedora/10/cyrus-sasl-lib-2.1.22-19.fc10.i386.rpm) = 145305
XMD5 (rpm/i386/fedora/10/cyrus-sasl-2.1.22-19.fc10.src.rpm) = f66997139328e0446b1635b4c59c5cd4
XSHA256 (rpm/i386/fedora/10/cyrus-sasl-2.1.22-19.fc10.src.rpm) = 70f087f10f7a6c62a30befadef9904c03543aa20ae890889b2a08a04382e6963
XSIZE (rpm/i386/fedora/10/cyrus-sasl-2.1.22-19.fc10.src.rpm) = 1661687
9c7e54bf867023e1f8fcaa16319c72f4
echo c - www/linux-f10-flashplugin10/
mkdir -p www/linux-f10-flashplugin10/ > /dev/null 2>&1
echo x - www/linux-f10-flashplugin10/Makefile
sed 's/^X//' >www/linux-f10-flashplugin10/Makefile << '5455d901d257b50d731e64397ea6df2f'
X# New ports collection makefile for: www/linux-f10-flashplugin10
X# Date created: 2009-06-26
X# Whom: bsam
X# Based on: www/linux-f8-flashplugin10 by nox@
X#
X# $FreeBSD$
X#
X
XPORTNAME= flashplugin
XPORTVERSION= 10.0r22
XCATEGORIES= www multimedia linux
XMASTER_SITES= http://fpdownload.macromedia.com/get/flashplayer/current/:plugin \
X ftp://ftp.ipt.ru/pub/download/:suplib
XPKGNAMEPREFIX= linux-f10-
XDISTFILES= install_flash_player_10_linux.tar.gz:plugin \
X linux-f10-flashsupport-9.0.1.i386.tar.gz:suplib
XDIST_SUBDIR= ${PORTNAME}/${PORTVERSION}
X
XMAINTAINER= emulation at FreeBSD.org
XCOMMENT= Adobe Flash Player NPAPI Plugin
X
XONLY_FOR_ARCHS= amd64 i386
XUSE_LINUX= yes
XUSE_LINUX_APPS= openssl curl cyrus-sasl2 libssh2 nspr nss openldap
X
XRESTRICTED= Redistribution not allowed
XRESTRICTED_FILES= ${DISTFILES:Nlinux-f10-flashsupport*:C/:[^:]+$//}
X
XNO_BUILD= yes
XWRKSRC= ${WRKDIR}/install_flash_player_10_linux
X
XUSE_NPAPI= linux-*
XNPAPI_FILES= libflashplayer.so
X
XCONFLICTS= linux-flashplugin-7* linux-flashplugin-9* linux-f8-flashplugin10-*
X
Xpost-install:
X @${INSTALL_PROGRAM} ${WRKDIR}/libflashsupport.so ${LINUXBASE}/usr/lib
X
X.include <bsd.port.pre.mk>
X.include "${PORTSDIR}/www/linux-mplayer-plugin/Makefile.npapi"
X.include <bsd.port.post.mk>
5455d901d257b50d731e64397ea6df2f
echo x - www/linux-f10-flashplugin10/distinfo
sed 's/^X//' >www/linux-f10-flashplugin10/distinfo << '1f552e2e0c05a396106217e48ff92103'
XMD5 (flashplugin/10.0r22/install_flash_player_10_linux.tar.gz) = 23e4c2b844db0f87ff62084178aa2b1f
XSHA256 (flashplugin/10.0r22/install_flash_player_10_linux.tar.gz) = cd29f166c87fecc943e88fe951bb61c56728fab12b4bf343badafa73ea95394e
XSIZE (flashplugin/10.0r22/install_flash_player_10_linux.tar.gz) = 3994294
XMD5 (flashplugin/10.0r22/linux-f10-flashsupport-9.0.1.i386.tar.gz) = 6e416c81497f65065d78dae1e0acad0d
XSHA256 (flashplugin/10.0r22/linux-f10-flashsupport-9.0.1.i386.tar.gz) = 4a309b1a326bd2212cc72480628659e5a7fd61d9e0572cb7350c206f030955bf
XSIZE (flashplugin/10.0r22/linux-f10-flashsupport-9.0.1.i386.tar.gz) = 3455
1f552e2e0c05a396106217e48ff92103
echo x - www/linux-f10-flashplugin10/pkg-descr
sed 's/^X//' >www/linux-f10-flashplugin10/pkg-descr << '57a1420ff5e8cb1b77c71ecb3a15c599'
XThis is the official Flash Player from Adobe. This plugin enables
Xyou to see .swf and .spl files on the 'net from your Opera, Mozilla or
XFirefox sessions.
X
XPlease see the Adobe home page for more information.
X
XFreeBSD Flash License Agreement:
X http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/96374
X
XWWW: http://www.adobe.com/
57a1420ff5e8cb1b77c71ecb3a15c599
echo x - www/linux-f10-flashplugin10/pkg-plist
sed 's/^X//' >www/linux-f10-flashplugin10/pkg-plist << '9254ee58cdc375ce93f8fc3b1afc9e77'
X at cwd /compat/linux
Xusr/lib/libflashsupport.so
X at cwd
9254ee58cdc375ce93f8fc3b1afc9e77
exit
More information about the freebsd-emulation
mailing list