ports/72865: emulators/vmware3 crashes on 5.3-STABLE

[Sebastien]

The following reply was made to PR ports/72865; it has been noted by GNATS.

From: Sebastien <sebastien.bourdeauducq at gmail.com>
To: bug-followup at FreeBSD.org,
 janos.mohacsi at bsd.hu
Cc:  
Subject: Re: ports/72865: emulators/vmware3 crashes on 5.3-STABLE
Date: Tue, 2 Aug 2005 15:34:50 +0200

 Same problem with 5.4-RELEASE and similar hardware.
 
 FreeBSD 5.4-RELEASE #9: Wed Jul 20 16:29:10 CEST 2005
     seb at oasis:/usr/src/sys/i386/compile/MYKERNEL
 WARNING: debug.mpsafenet forced to 0 as netnatm requires Giant
 WARNING: MPSAFE network stack disabled, expect reduced performance.
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.10-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
   
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 real memory  = 259850240 (247 MB)
 avail memory = 244625408 (233 MB)
 ACPI APIC Table: <A M I  OEMAPIC >
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 acpi0: <A M I OEMRSDT> on motherboard
 acpi0: Power Button (fixed)
 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
 cpu0: <ACPI CPU> on acpi0
 acpi_throttle0: <ACPI CPU Throttling> on cpu0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 
 0xdff80000-0xdfffffff,0xd0000000-0xd7ffffff irq 16 at device 2.0 on pci0
 agp0: detected 8060k stolen memory
 agp0: aperture size is 128M
 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xdf20-0xdf3f irq 16 
 at device 29.0 on pci0
 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xdf40-0xdf5f irq 19 
 at device 29.1 on pci0
 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xdf80-0xdf9f irq 18 
 at device 29.2 on pci0
 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
 usb2: USB revision 1.0
 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff7bc00-0xdff7bfff irq 23 at 
 device 29.7 on pci0
 usb3: EHCI version 1.0
 usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 usb3: USB revision 2.0
 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 6 ports with 6 removable, self powered
 umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
 umass0: Get Max Lun not supported (STALLED)
 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xc800-0xc8ff mem 
 0xdfdff000-0xdfdfffff irq 17 at device 12.0 on pci1
 sis0: Silicon Revision: DP83816A
 miibus0: <MII bus> on sis0
 ukphy0: <Generic IEEE 802.3u media interface> on miibus0
 ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 sis0: Ethernet address: 00:03:0d:07:3d:62
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH4 UDMA100 controller> port 
 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
 ata0: channel #0 on atapci0
 ata1: channel #1 on atapci0
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 pcm0: <Intel ICH4 (82801DB)> port 0xe100-0xe13f,0xe000-0xe0ff at device 31.5 
 on pci0
 pcm0: <VIA Technologies VIA1612A AC97 Codec>
 pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
 acpi_button0: <Sleep Button> on acpi0
 acpi_button1: <Power Button> on acpi0
 acpi_tz0: <Thermal Zone> on acpi0
 acpi_cmbat0: <Control Method Battery> on acpi0
 acpi_acad0: <AC Adapter> on acpi0
 ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 acpi_lid0: <Control Method Lid Switch> on acpi0
 orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff on isa0
 pmtimer0 on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: model Generic PS/2 mouse, device ID 0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 ugen0: vendor 0x1110 product 0x9010, rev 1.10/40.00, addr 2
 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
 ums0: 3 buttons and Z dir.
 Timecounter "TSC" frequency 2400100104 Hz quality 800
 Timecounters tick every 10.000 msec
 ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to 
 accept, logging disabled
 ad0: 38204MB <SAMSUNG MP0402H/UC100-14> [77622/16/63] at ata0-master UDMA100
 acd0: CDRW <SAMSUNG CDRW/DVD SN-324F/U200> at ata1-master PIO4
 Mounting root from ufs:/dev/ad0s1a
 WARNING: driver "vmmon" used unreserved major device number 200
 vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 
 (3.2.x mvm) $
 vmmon: Module vmmon: initialized