Making Picostation m2HP work

[hiren panchasara]

http://www.ubnt.com/picostationm

Here is how it looks on boot:


U-Boot 1.1.4.2-s564 (Jul 19 2012 - 10:41:56)

Board: Ubiquiti Networks XM board (rev 1.0 e302)
DRAM:  32 MB
Flash:  8 MB
PCIe WLAN Module found (#1).
Net:   eth0, eth1
Hit any key to stop autoboot:  0
## Booting image at 9f050000 ...
   Image Name:   MIPS OpenWrt Linux-3.3.8
   Created:      2013-05-31  19:12:55 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    924122 Bytes = 902.5 kB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...
<skip>

Dropping to uboot:

U-Boot 1.1.4.2-s564 (Jul 19 2012 - 10:41:56)

Board: Ubiquiti Networks XM board (rev 1.0 e302)
DRAM:  32 MB
Flash:  8 MB
PCIe WLAN Module found (#1).
Net:   eth0, eth1
Hit any key to stop autoboot:  0
ar7240> printenv
bootdelay=1
baudrate=115200
ethaddr=00:15:6d:0d:00:00
mtdids=nor0=ar7240-nor0
partition=nor0,0
mtddevnum=0
mtddevname=u-boot
filesize=10000
fileaddr=81000000
serverip=192.168.1.254
ethact=eth0
mtdparts=mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),5760k(rootfs),256k(cfg),64k(EEPROM)
bootcmd=bootm 0x9f050000
bootargs=console=tty0 root=31:03 rootfstype=squashfs init=/init
ipaddr=192.168.1.20
stdin=serial
stdout=serial
stderr=serial

Environment size: 452/65532 bytes
ar7240>

Currently trying to build image with Adrian's

http://freebsd-wifi-build.googlecode.com/svn/trunk/ to put on the board.

Now, Adrian is going to guide me from here :-)

Thanks,
Hiren