Strange nanobsd issue
Mike Tancsa
mike at sentex.net
Wed Jul 4 17:33:33 UTC 2007
I ran into a rather strange problem I dont understand. With my
nanobsd image, if I comment out
hint.sio.0.flags="0x10"
or
hint.uart.0.flags="0x10"
from /boot/device.hints
I get the RAM disks mounted twice ?!
eg.
# df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad0s1a 245239 98076 127544 43% /
devfs 1 1 0 100% /dev
/dev/md0 4526 1784 2380 43% /etc
/dev/md1 27990 124 25628 0% /var
/dev/md2 4526 1788 2376 43% /etc
/dev/md3 27990 436 25316 2% /var
/boot.config is empty and /boot/loader.conf has
hw.ata.ata_dma=0
hw.ata.atapi_dma=0
beastie_disable="YES" # Turn the beastie boot menu on and off
#comconsole_speed="19200"
#console="nullconsole"
autoboot_delay="4
having nullconsole doesnt seem to matter any. The device.hints
modification seems to be the single thing that effects this behavior.
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
More information about the freebsd-embedded
mailing list