Gateworks GW2348-4 booting

John-Mark Gurney gurney_j at resnet.uoregon.edu
Thu Jul 20 02:12:33 UTC 2006


Though for some reason you can't turn off the boot script, I've sent
email to their list asking about that issue.  But bootp does work though
you can't configure it (that I can see) from ip_config.

+No devices on IDE controller 0

Trying NPE-B...success. Using NPE-B with PHY 0.
... waiting for BOOTP information
Ethernet eth0: MAC address 00:d0:12:02:47:33
IP: 192.168.0.58/255.255.255.0, Gateway: 192.168.0.14
Default server: 192.168.3.1

RedBoot(tm) bootstrap and debug environment [ROM]
Gateworks certified release, version 2.02 - built 05:22:19, Mar  3 2006

Platform: Gateworks Avila GW234X (IXP42X 533MHz) BE
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2004, 2005 Gateworks Corporation

RAM: 0x00000000-0x04000000, [0x000298b0-0x03fc1000] available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
^C
RedBoot> load -b 0x200000 -m http -h 192.168.0.21 /kernel
Address offset = 0x40000000
Entry point: 0x00200100, address range: 0x00200000-0x004db2d4
RedBoot> go
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #0: Wed Jul 19 10:40:52 PDT 2006
    jmg at carbon.funkthat.com:/usr/home/jmg/p4/arm/src/sys/arm/compile/AVILA
CPU: IXP425 533MHz rev 1 (XScale core)
  DC enabled IC enabled WB enabled LABT branch prediction enabled
  32KB/32B 32-way Instruction cache
  32KB/32B 32-way write-back-locking Data cache
real memory  = 67108864 (64 MB)
avail memory = 59408384 (56 MB)
real memory = 33554432 (32 MB)
avail memory = 58826752 (56 MB)
ixp0: <Intel IXP425> on motherboard
ixpclk0: <IXP425 Timer> on ixp0
Timecounter "IXP425 Timer" frequency 66666600 Hz quality 1000
Timecounters tick every 10.000 msec
bootpc_init: wired to interface 'npe0'
panic: bootpc_init: Could not find interface specified by BOOTP_WIRED_TO: npe0
KDB: enter: panic
[thread pid 0 tid 0 ]
Stopped at      kdb_enter+0x38: swinv   0x00ffffe7
db> 

-- 
  John-Mark Gurney				Voice: +1 415 225 5579

     "All that I will do, has been done, All that I have, has not."


More information about the freebsd-embedded mailing list