[openzfs] r365058 arm64 uefi boot fails with "unknown filesystem" after launching kernel
Navdeep Parhar
nparhar at gmail.com
Wed Sep 2 21:01:35 UTC 2020
Load cryptodev manually from the loader to boot and then add
cryptodev_load="YES" to your loader.conf.
Regards,
Navdeep
On 9/2/20 1:58 PM, Dave Cottlehuber wrote:
> hi Matt, Ryan
>
> Something goes awry after loading kernel & zfs drivers, at point of mounting the root filesystem from boot env - unknown filesystem.
>
> Running ? to show available fs doesn't show zfs here, but as we loaded kernel already from zfs this is confusing.
>
> Any ideas?
>
> mountroot> ?
> List of GEOM managed disk devices:
> da1 ufs/FreeBSD_Install ufsid/5f3524aa78541663
> da0s2
> da0p1
> da0
> gpt/zfs0
> gpt/swap0
> msdosfs/EFISYS
> gpt/efiboot0
> ada0p3
> ada0p2 ada0p1 ada0
>
> Additionally at this point, it doesn't appear to be possible to boot/mount from the previous boot environment, as zfs.ko etc is already loaded, I'm not sure if I can set this prior with `loaddev` or similar.
>
> full dmesg/logs here - https://dpaste.org/iwRd , trimmed below.
>
> svn path=/head/; revision=365058 , commit 52a2c0f
>
> Consoles: EFI console
> Reading loader env vars from /efi/freebsd/loader.env
> Setting currdev to disk1p1:
> FreeBSD/arm64 EFI loader, Revision 1.1
>
> Command line arguments: loader.efi
> Image base: 0x9fe6d30000
> EFI version: 2.70
> EFI Firmware: American Megatrends (rev 5.13)
> Console: efi (0x20000000)
> Load Path: \EFI\FreeBSD\loader.efi
> Load Device: PciRoot(0xFF)/Pci(0x1,0x0)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,BE9634BF-D684-11EA-B300-001B21E07D7B,0x28,0x64000)
> BootCurrent: 0001
> BootOrder: 0001[*] 0004 001b 001f 001a 000e 0000 0003 0005 0006 0007 001c 001d 001e
> BootInfo Path: HD(1,GPT,BE9634BF-D684-11EA-B300-001B21E07D7B,0x28,0x64000)/\EFI\refind\refind_aa64.efi
> Ignoring Boot0001: Only one DP found
> Trying ESP: PciRoot(0xFF)/Pci(0x1,0x0)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,BE9634BF-D684-11EA-B300-001B21E07D7B,0x28,0x64000)
> Setting currdev to disk1p1:
> Trying: PciRoot(0xFF)/Pci(0x1,0x0)/Sata(0x0,0xFFFF,0x0)/HD(2,GPT,BE9A1581-D684-11EA-B300-001B21E07D7B,0x64800,0x2800000)
> Setting currdev to disk1p2:
> Trying: PciRoot(0xFF)/Pci(0x1,0x0)/Sata(0x0,0xFFFF,0x0)/HD(3,GPT,BEA23FFC-D684-11EA-B300-001B21E07D7B,0x2864800,0x355DE800)
> Setting currdev to zfs:zroot/ROOT/13.0-CURRENT-20200901.193810:
> Loading /boot/defaults/loader.conf
> Loading /boot/defaults/loader.conf
> Loading /boot/device.hints
> Loading /boot/loader.conf
> Loading /boot/loader.conf.local
> Loading kernel...
> /boot/kernel/kernel text=0x2a8 text=0x799990 text=0x1e7a6c data=0x196b80 data=0x0+0x3a378e syms=[0x8+0x165978+0x8+0x158936]
> Loading configured modules...
> /boot/kernel/tmpfs.ko text=0x4421 text=0x8fec data=0x1110+0x18 syms=[0x8+0x1f68+0x8+0x13df]
> /boot/kernel/xz.ko text=0x850 text=0x22d0 data=0x268+0x400 syms=[0x8+0x870+0x8+0x412]
> /boot/kernel/linuxkpi.ko text=0x709d text=0x13070 data=0x1970+0x750 syms=[0x8+0x5a48+0x8+0x3dfb]
> /boot/entropy size=0x1000
> /etc/hostid size=0x25
> /boot/kernel/mlx5en.ko text=0x19b35 text=0x11a48 data=0x26d8+0x8 syms=[0x8+0x32e8+0x8+0x21ae]
> /boot/kernel/mlx5.ko text=0xc369 text=0x23e24 data=0x1b50+0x94 syms=[0x8+0x5100+0x8+0x3c65]
> /boot/kernel/fusefs.ko text=0x8236 text=0xcb48 data=0x3420+0x68 syms=[0x8+0x4350+0x8+0x4894]
> /boot/kernel/opensolaris.ko text=0x12c3 text=0x94c data=0x468+0x6830 syms=[0x8+0x1050+0x8+0x8bb]
> /boot/kernel/mlxfw.ko text=0xed2 text=0x167c data=0x258 syms=[0x8+0x750+0x8+0x409]
> /boot/kernel/zfs.ko text=0xa3e88 text=0x1c8828 data=0x25908+0x158990 syms=[0x8+0x2fa48+0x8+0x29ff3]
>
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...
> No valid device tree blob found!
> WARNING! Trying to fire up the kernel, but no device tree blob found!
> EFI framebuffer information:
> addr, size 0x430000000, 0x1d4c00
> dimensions 800 x 600
> stride 800
> masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2020 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT r365058+d8f4c1a833bf-c271116(master) GENERIC arm64
> FreeBSD clang version 11.0.0 (git at github.com:llvm/llvm-project.git llvmorg-11.0.0-rc1-47-gff47911ddfc)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT(efifb): resolution 800x600
> module firmware already present!
> KLD file zfs.ko is missing dependencies
> module_register: cannot register tmpfs from kernel; already loaded from tmpfs.ko
> Module tmpfs failed to register: 17
> real memory = 137167400960 (130813 MB)
> avail memory = 133608034304 (127418 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
> random: unblocking device.
> ...
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <Micron 5200 MTFDDAK480TDC D1MH027> ACS-3 ATA SATA 3.x device
> ada0: Serial Number 191020FD543B
> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 457862MB (937703088 512 byte sectors)
> ...
> sysctl_unregister_oid: failed(22) to unregister sysctl(tmpfs)
> Release APs...done
> Trying to mount root from zfs:zroot/ROOT/13.0-CURRENT-20200901.193810 []...
> Mounting from zfs:zroot/ROOT/13.0-CURRENT-20200901.193810 failed with error 2: unknown file system.
> ...
> da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
> da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device
> da0: Serial Number 512436A8
> da0: 40.000MB/s transfers
> da0: 2006MB (4108288 512 byte sectors)
> da0: quirks=0x2<NO_6_BYTE>
> ..
> Loader variables:
> vfs.root.mountfrom=zfs:zroot/ROOT/13.0-CURRENT-20200901.193810
>
> Manual root filesystem specification:
> —
> Dave Cottlehuber
> +43 67 67 22 44 78
> Managing Director
> Skunkwerks, GmbH
> http://skunkwerks.at/
> ATU70126204
> Firmenbuch 410811i
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>
More information about the freebsd-current
mailing list