SD card adapter doesn't working anymore

[Ian Lepore]

On Fri, 2016-03-25 at 23:33 +0300, Ruslan Makhmatkhanov wrote:
> Hello,
> 
> I have this in pciconf output:
> 
> =====================================================================
> =
> none1 at pci0:36:0:0:	class=0x088000 card=0x167e103c
> chip=0x2392197b 
> rev=0x30 hdr=0x00
>      vendor     = 'JMicron Technology Corp.'
>      device     = 'SD/MMC Host Controller'
>      class      = base peripheral
> 
> none2 at pci0:36:0:3:	class=0x088000 card=0x167e103c
> chip=0x2393197b 
> rev=0x30 hdr=0x00
>      vendor     = 'JMicron Technology Corp.'
>      device     = 'MS Host Controller'
>      class      = base peripheral
> =====================================================================
> =
> 
> And my SD-card controller is not working anymore (it worked on 
> -current 
> on the same laptop year or two ago). Do I need to load some kld to
> make 
> it working, or support for this controllers was dropped altogether
> for 
> some reason? I have mostly vanilla GENERIC at r296772, but it
> actually 
> stopped to work much earlier.
> 
> Thanks.
> 

This is probably my fault, introduced with r292180 in December, and
fixed a few days ago with r297127; sorry about that.  Updating should
get you running again.

Unfortunately you can't fix it just by pre-loading the right modules,
because part of the problem was a missing MODULE_DEPENDS() that helps
the kernel linker resolve symbols between different modules.

-- Ian