Install 10.0-RC3 on MacBookPro Late 2013

[Huang Wen Hui]

2014/1/6 Hans Petter Selasky <hps at bitfrost.no>

> On 01/06/14 10:41, Huang Wen Hui wrote:
>
>> % grep xhci dmesg-xhci-debug.txt | more
>> xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xc1e00000-0xc1e0ffff at
>> device 20.0 on pci0
>> xhci0: attempting to allocate 1 MSI vectors (8 supported)
>> xhci0: using IRQ 266 for MSI
>> xhci0: MSI enabled
>>
>
> Those USB timeouts are most likely due to port routing not working
> properly. It is because intel did something special to their lynx point
> series.
>
> Try to set :
>
> hw.usb.xhci.xhci_port_route = "-1"
>
> in /boot/loader.conf


Try this before,  hw.usb.xhci.xhci_port_route = "-1" make almost of all usb
devices not found.

external mouse seems to no power at all.

# usbconfig list
ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE (0mA)
ugen0.2: <product 0x8406 vendor 0x05ac> at usbus0, cfg=255 md=HOST
spd=SUPER (5.0Gbps) pwr=ON (100mA)



>
> --HPS
>