Call for bge(4) testers

[Kurt Jaeger]

Hi!

> There were lots of reports that stock bge(4) does not work on Dell
> Rx20/HP DL 360 G8.

I tested it with 9.1-RC1 amd64 on a HP DL 360 G8.

Without the patch, bge0 did not work (timeouts etc).

With the patch, bge0 does work:

bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 on pci3
bge0: APE FW version: NCSI v1.0.88.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: ac:16:2d:77:22:88
pci0:3:0:1: failed to read VPD data.

> box. I'm especially interested in whether there is any ASF/IPMI
> regression on BCM570x/571x.

Any ipmi-specific tests I should make ?

-- 
pi at opsec.eu            +49 171 3101372                         8 years to go !