panic with devclass_get_name (dc=0xdeadc0dedeadc0de)

Roger Hammerstein cheeky.m at live.com
Wed Nov 24 17:43:13 UTC 2010



> Thank you all for the replies.   Will try ATA_CAM shortly.
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"


Using ATA_CAM it doesn't panic, it removes the bad disk from /dev after the problem.

new dmesg and the error log on the bottom
Table 'FACP' at 0x7fff0290
Table 'APIC' at 0x7fff0390
APIC: Found table at 0x7fff0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #1: Tue Nov 23 17:50:01 EST 2010
    root at butter.local:/usr/obj/usr/src/sys/GENERIC amd64
WARNING: WITNESS option enabled, expect reduced performance.
Table 'FACP' at 0x7fff0290
Table 'APIC' at 0x7fff0390
Table 'OEMB' at 0x7fffe040
Table 'SRAT' at 0x7fff41d0
SRAT: Found table at 0x7fff41d0
SRAT: Found CPU APIC ID 0 domain 0: enabled
SRAT: Found CPU APIC ID 1 domain 1: enabled
SRAT: Found CPU APIC ID 2 domain 2: disabled
SRAT: Found CPU APIC ID 3 domain 3: disabled
SRAT: Found memory domain 0 addr 100000 len 3ff00000: enabled
SRAT: Found memory domain 1 addr 40000000 len 40000000: enabled
SRAT: Found memory domain 2 addr 0 len 0: disabled
SRAT: Found memory domain 3 addr 0 len 0: disabled
SRAT: Found memory domain 0 addr 0 len 0: disabled
SRAT: Found memory domain 0 addr 0 len 9fc00: enabled
SRAT: No memory region found for 10fb000 - 7ffe0000
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810cd000.
Calibrating TSC clock ... TSC clock: 2394052032 Hz
CPU: AMD Opteron(tm) Processor 250 (2394.05-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f51  Family = f  Model = 25  Stepping = 1
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x1<LAHF>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
WARNING: This architecture revision has known SMP hardware bugs which may cause random instability
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x00000000010fb000 - 0x000000007c38ffff, 2066305024 bytes (504469 pages)
avail memory = 2050400256 (1955 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <A M I  OEMAPIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
x86bios:  IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff800000d000
x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000
x86bios:  ROM 0x0a0000-0x0fefff at 0xffffff00000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf9cd0 00024 (v02 ACPIAM)
ACPI: XSDT 0x7fff0100 00044 (v01 A M I  OEMXSDT  06000630 MSFT 00000097)
ACPI: FACP 0x7fff0290 000F4 (v03 A M I  OEMFACP  06000630 MSFT 00000097)
ACPI: DSDT 0x7fff0410 03DBD (v01  0ABGZ 0ABGZ005 00000005 INTL 02002026)
ACPI: FACS 0x7fffe000 00040
ACPI: APIC 0x7fff0390 00080 (v01 A M I  OEMAPIC  06000630 MSFT 00000097)
ACPI: OEMB 0x7fffe040 00056 (v01 A M I  AMI_OEM  06000630 MSFT 00000097)
ACPI: SRAT 0x7fff41d0 00160 (v01 A M I  OEMSRAT  06000630 MSFT 00000097)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
CPU0: local APIC error 0x80
acpi0: <A M I OEMXSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 540, 20 (4) failed
acpi0: reservation of 500, 20 (4) failed
acpi0: reservation of 560, 20 (4) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
ACPI timer: 0/4 0/4 0/4 0/5 0/4 0/4 0/4 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 9 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0    9   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0    5   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0   10   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link18:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link19:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link20:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link21:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link22:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link23:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link24:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link25:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link26:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link27:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link28:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link29:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link30:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 10 11 12 14 15
pci_link31:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10
  Validation          0   10   N     0  10
  After Disable       0  255   N     0  10
pci_link32:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1166, dev=0x0036, revid=0x00
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0205, revid=0x00
        domain=0, bus=0, slot=2, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0214, revid=0x00
        domain=0, bus=0, slot=2, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0200, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
found-> vendor=0x1166, dev=0x0234, revid=0x00
        domain=0, bus=0, slot=2, func=2
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0223, revid=0x01
        domain=0, bus=0, slot=3, func=0
        class=0c-03-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xfebfa000, size 12, enabled
        map[14]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
ohci early: SMM active, request owner change
found-> vendor=0x1166, dev=0x0223, revid=0x01
        domain=0, bus=0, slot=3, func=1
        class=0c-03-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xfebf9000, size 12, enabled
        map[14]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
ohci early: SMM active, request owner change
found-> vendor=0x1166, dev=0x0223, revid=0x01
        domain=0, bus=0, slot=3, func=2
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xfebf8000, size 12, enabled
        map[14]: type I/O Port, range 32, base 0xd400, size  8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
found-> vendor=0x1002, dev=0x4752, revid=0x27
        domain=0, bus=0, slot=5, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
        map[14]: type I/O Port, range 32, base 0xe000, size  8, enabled
        map[18]: type Memory, range 32, base 0xfebff000, size 12, enabled
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 28
found-> vendor=0x1166, dev=0x0130, revid=0xa3
        domain=0, bus=0, slot=8, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0130, revid=0xa3
        domain=0, bus=0, slot=9, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        domain=0, bus=0, slot=10, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        domain=0, bus=0, slot=11, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        domain=0, bus=0, slot=12, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        domain=0, bus=0, slot=13, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
        domain=0, bus=0, slot=24, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
        domain=0, bus=0, slot=24, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
        domain=0, bus=0, slot=24, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
        domain=0, bus=0, slot=24, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
        domain=0, bus=0, slot=25, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
        domain=0, bus=0, slot=25, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
        domain=0, bus=0, slot=25, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
        domain=0, bus=0, slot=25, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   2
pcib1:   I/O decode        0xa000-0xbfff
pcib1:   memory decode     0xfc900000-0xfc9fffff
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1166, dev=0x0104, revid=0xb2
        domain=0, bus=1, slot=13, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0016, statreg=0x0230, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1166, dev=0x024a, revid=0x00
        domain=0, bus=1, slot=14, func=0
        class=01-04-05, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type I/O Port, range 32, base 0xbc00, size  3, enabled
pcib1: requested I/O range 0xbc00-0xbc07: in range
        map[14]: type I/O Port, range 32, base 0xb880, size  2, enabled
pcib1: requested I/O range 0xb880-0xb883: in range
        map[18]: type I/O Port, range 32, base 0xb800, size  3, enabled
pcib1: requested I/O range 0xb800-0xb807: in range
        map[1c]: type I/O Port, range 32, base 0xb480, size  2, enabled
pcib1: requested I/O range 0xb480-0xb483: in range
        map[20]: type I/O Port, range 32, base 0xb400, size  5, enabled
pcib1: requested I/O range 0xb400-0xb41f: in range
        map[24]: type Memory, range 32, base 0xfc9fe000, size 13, enabled
pcib1: requested memory range 0xfc9fe000-0xfc9fffff: good
pcib1: matched entry for 1.14.INTA
pcib1: slot 14 INTA hardwired to IRQ 11
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
atapci0: <ServerWorks HT1000 SATA150 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xfc9fe000-0xfc9fffff irq 11 at device 14.0 on pci1
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 49
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
ata5: <ATA channel 3> on atapci0
atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0
ata0: <ATA channel 0> on atapci1
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50
ata1: <ATA channel 1> on atapci1
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0xe800-0xe8ff mem 0xfebfa000-0xfebfafff irq 10 at device 3.0 on pci0
ohci0: usbpf attached
ohci0: (New OHCI DeviceId=0x02231166)
ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 0 vector 52
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> port 0xd800-0xd8ff mem 0xfebf9000-0xfebf9fff irq 10 at device 3.1 on pci0
ohci1: usbpf attached
ohci1: (New OHCI DeviceId=0x02231166)
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> port 0xd400-0xd4ff mem 0xfebf8000-0xfebf8fff irq 10 at device 3.2 on pci0
ehci0: usbpf attached
ehci0: (New EHCI DeviceId=0x02231166)
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 28 at device 5.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x0-0x0
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   memory decode     0xfca00000-0xfcafffff
pcib4:   prefetched decode 0xff500000-0xff5fffff
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x14e4, dev=0x166a, revid=0x03
        domain=0, bus=4, slot=4, func=0
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=9
        powerspec 2  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        map[10]: type Memory, range 64, base 0xfcaf0000, size 16, enabled
pcib4: requested memory range 0xfcaf0000-0xfcafffff: good
        map[18]: type Memory, range 64, base 0xfcae0000, size 16, enabled
pcib4: requested memory range 0xfcae0000-0xfcaeffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 17
found-> vendor=0x14e4, dev=0x166a, revid=0x03
        domain=0, bus=4, slot=4, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        map[10]: type Memory, range 64, base 0xfcad0000, size 16, enabled
pcib4: requested memory range 0xfcad0000-0xfcadffff: good
        map[18]: type Memory, range 64, base 0xfcac0000, size 16, enabled
pcib4: requested memory range 0xfcac0000-0xfcacffff: good
pcib4: matched entry for 4.4.INTB
pcib4: slot 4 INTB hardwired to IRQ 19
pci0:4:4:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008003> mem 0xfcaf0000-0xfcafffff,0xfcae0000-0xfcaeffff irq 17 at device 4.0 on pci4
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 56
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0035, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:xx:xx:xx:xx:xx
pci0:4:4:1: bad VPD cksum, remain 14
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008003> mem 0xfcad0000-0xfcadffff,0xfcac0000-0xfcacffff irq 19 at device 4.1 on pci4
bge1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 64
bge1: using IRQ 257 for MSI
bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0035, rev. 0
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: bpf attached
bge1: Ethernet address: 00:xx:xx:xx:xx:xx
pcib5: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0x0-0x0
pcib7:   no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
pcib8: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib8:   domain            0
pcib8:   secondary bus     8
pcib8:   subordinate bus   8
pcib8:   I/O decode        0x0-0x0
pcib8:   no prefetched decode
pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.BR46 - AE_NOT_FOUND
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 53
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 57
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 59
uart1: fast interrupt
acpi0: wakeup code va 0xffffff8000184000 pa 0x4000
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
powernow0: <Cool`n'Quiet K8> on cpu0
powernow0: STATUS: 0x4060604101010
powernow0: STATUS: maxfid: 0x10
powernow0: STATUS: maxvid: 0x04
device_attach: powernow0 attach returned 6
powernow1: <Cool`n'Quiet K8> on cpu1
powernow1: STATUS: 0x4060604101010
powernow1: STATUS: maxfid: 0x10
powernow1: STATUS: maxvid: 0x04
device_attach: powernow1 attach returned 6
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2394052032 Hz quality -100
lapic: Divisor 2, Frequency 99752186 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata2: SATA connect time=0ms status=00000113
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0xd0 err=0x00 lsb=0x01 msb=0x0c
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: SATA connect time=0ms status=00000113
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0xd0 err=0x00 lsb=0x10 msb=0x00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata4: SATA connect time=0ms status=00000113
ata4: reset tp1 mask=01 ostat0=50 ostat1=00
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1
ata5: SATA connect time=0ms status=00000113
ata5: reset tp1 mask=01 ostat0=50 ostat1=00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1
ata0: reset tp1 mask=02 ostat0=ff ostat1=50
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x20000
(aprobe0:ata2:0:0:0): SIGNATURE: 0000
(aprobe1:ata3:0:0:0): SIGNATURE: 0000
(aprobe2:ata4:0:0:0): SIGNATURE: 0000
(aprobe3:ata5:0:0:0): SIGNATURE: 0000
(aprobe4:ata0:0:1:0): SIGNATURE: eb14
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ada0 at ata2 bus 0 scbus0 target 0 lun 0(cd0:ata0:0:1:0): SCSI status error
(cd0:ata0:0:1:0): Requesting SCSI sense data

ada0: <ST3200826AS 3.02> ATA-7 SATA 1.x device(cd0:ata0:0:1:0): SCSI status error
(cd0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:1:0): CAM status: SCSI Status Error
(cd0:ata0:0:1:0): SCSI status: Check Condition
(cd0:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:1:0): Error 6, Unretryable error
cd0 at ata0 bus 0 scbus4 target 1 lun 0
cd0: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present

ada0: Serial Number 3ND0D8MG
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 190782MB (390721968 512 byte sectors: 16H 63S/T 16383C)ugen0.1: <0x1166> at usbus0
uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <0x1166> at usbus1
uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <0x1166> at usbus2
uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2

ada1 at ata3 bus 0 scbus1 target 0 lun 0
ada1: <ST3200826AS 3.02> ATA-7 SATA 1.x device
ada1: Serial Number 3ND09XDA
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 190782MB (390721968 512 byte sectors: 16H 63S/T 16383C)
ada2 at ata4 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device
ada2: Serial Number WD-WMAP41419538
ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada2: 143089MB (293046768 512 byte sectors: 16H 63S/T 16383C)
ada3 at ata5 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device
ada3: Serial Number WD-WMAP41429759
ada3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada3: 143089MB (293046768 512 byte sectors: 16H 63S/T 16383C)
pass0 at ata2 bus 0 scbus0 target 0 lun 0
pass0: <ST3200826AS 3.02> ATA-7 SATA 1.x device
pass0: Serial Number 3ND0D8MG
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass1 at ata3 bus 0 scbus1 target 0 lun 0
pass1: <ST3200826AS 3.02> ATA-7 SATA 1.x device
pass1: Serial Number 3ND09XDA
pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass2 at ata4 bus 0 scbus2 target 0 lun 0
pass2: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device
pass2: Serial Number WD-WMAP41419538
pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass3 at ata5 bus 0 scbus3 target 0 lun 0
pass3: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device
pass3: Serial Number WD-WMAP41429759
pass3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass4 at ata0 bus 0 scbus4 target 1 lun 0
pass4: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device
pass4: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 1 (CPU1: local APIC error 0x80ISA IRQ 1
) to lapic 1 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 49
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 50
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 1 vector 51
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 52
msi: Assigning MSI IRQ 257 to local APIC 1 vector 53
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
GEOM: new disk cd0
GEOM: new disk ada0
GEOM: new disk ada1
GEOM: new disk ada2
GEOM: new disk ada3
(cd0:ata0:0:1:0): SCSI status error
(cd0:ata0:0:1:0): Requesting SCSI sense data
(cd0:ata0:0:1:0): SCSI status error
(cd0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:1:0): CAM status: SCSI Status Error
(cd0:ata0:0:1:0): SCSI status: Check Condition
(cd0:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:1:0): Error 6, Unretryable error
(cd0:ata0:0:1:0): SCSI status error
(cd0:ata0:0:1:0): Requesting SCSI sense data
(cd0:ata0:0:1:0): SCSI status error
(cd0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:1:0): CAM status: SCSI Status Error
(cd0:ata0:0:1:0): SCSI status: Check Condition
(cd0:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:1:0): Error 6, Unretryable error
Root mount waiting for: usbus2
uhub2: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ada0s1a [rw]...
ct_to_ts([2010-11-24 12:29:21]) = 1290601761.000000000
start_init: trying /sbin/init
bge1: link state changed to UP



Nov 24 12:36:15 butter kernel: ata4: SATA connect time=0ms status=00000113
Nov 24 12:36:15 butter kernel: ata4: reset tp1 mask=01 ostat0=d0 ostat1=00
Nov 24 12:36:15 butter kernel: ata4: stat0=0xd0 err=0x00 lsb=0x54 msb=0x02
Nov 24 12:36:15 butter last message repeated 309 times
Nov 24 12:36:15 butter kernel: ata4: reset tp2 stat0=d0 stat1=00 devices=0x0
Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Command timed out
Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Retrying command
Nov 24 12:36:15 butter kernel: (pass2:ata4:0:0:0): lost device
Nov 24 12:36:15 butter kernel: (pass2:ata4:0:0:0): removing device entry
Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): lost device
Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Invalidating pack
Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Synchronize cache failed
Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): removing device entry
Nov 24 12:36:15 butter kernel:

Looks like I'll be sticking with ATA_CAM.
 		 	   		  


More information about the freebsd-current mailing list