Boot Lockup on XenServer 5.5 (r203178)
Tom Judge
tom at tomjudge.com
Fri Jan 29 21:49:58 UTC 2010
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Tom Judge wrote:
> Hi,
>
> I am having problems booting my 9 box at r203178 in Citrix XenServer 5.5.
>
> The last time I updated this box was October 3rd.
>
> The box now hangs at:
>
> Trying to mount root from ufs:/dev/ad0s1a
>
>
I have just worked out how to access the VM's serial port so I switched
the console over to it and managed to capture a boot verbose:
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ ³ ______
³ ³ | ____| __ ___ ___
³ Welcome to FreeBSD! ³ | |__ | '__/ _ \/ _ \
³ ³ | __|| | | __/ __/
³ ³ | | | | | | |
³ 1. Boot FreeBSD [default] ³ |_| |_| \___|\___|
³ 2. Boot FreeBSD with ACPI disabled ³ ____ _____ _____
³ 3. Boot FreeBSD in Safe Mode ³ | _ \ / ____| __ \
³ 4. Boot FreeBSD in single user mode ³ | |_) | (___ | | | |
³ 5. Boot FreeBSD with verbose logging ³ | _ < \___ \| | | |
³ 6. Escape to loader prompt ³ | |_) |____) | |__| |
³ 7. Reboot ³ | | | |
³ ³ |____/|_____/|_____/
³ ³
³ ³
³ ³
³ Select option, [Enter] for default ³
³ or [Space] to pause timer 7 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=00000000ef2f6400
SMAP type=02 base=00000000ef3f6400 len=0000000000c04c00
SMAP type=02 base=00000000efffc000 len=0000000000004000
SMAP type=01 base=0000000100000000 len=000000000a000000
163840K of memory above 4GB ignored
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #9 r203178M: Fri Jan 29 21:09:00 UTC 2010
tj at tj-tinderbox.chicago.mintel.ad:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc114c000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1995028866 Hz
CPU: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz (1995.03-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0x781fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX,FXSR,SSE,SSE2>
Features2=0x80002201<SSE3,SSSE3,CX16,<b31>>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
real memory = 4194304000 (4000 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x00000000eb043fff, 3921797120 bytes (957470 pages)
avail memory = 3919826944 (3738 MB)
Table 'FACP' at 0xef4f79e0
Table 'APIC' at 0xef4f7ae0
APIC: Found table at 0xef4f7ae0
MP Configuration Table version 1.4 found at 0xc00fcc00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 1: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 2: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 3: enabled
SMP: Added CPU 6 (AP)
ACPI APIC Table: <Xen HVM>
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 4 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
bios32: Found BIOS32 Service Directory header at 0xc00fa8f0
bios32: Entry = 0xfa900 (c00fa900) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xa940
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xea010 00024 (v2 Xen)
ACPI: XSDT 0xef4f7ba0 0003C (v1 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0xef4f79e0 000F4 (v4 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0xef4f6840 01116 (v2 Xen HVM 00000000 INTL 20060707)
ACPI: FACS 0xef4f6800 00040
ACPI: APIC 0xef4f7ae0 00080 (v2 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0xef4f7b60 00038 (v1 Xen HVM 00000000 HVML 00000000)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 5, irq 5
ioapic0: intpin 5 trigger: level
ioapic0: intpin 5 polarity: low
MADT: Interrupt override: source 10, irq 10
ioapic0: intpin 10 trigger: level
ioapic0: intpin 10 polarity: low
MADT: Interrupt override: source 11, irq 11
ioapic0: intpin 11 trigger: level
ioapic0: intpin 11 polarity: low
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
npx0: INT 16 interface
acpi0: <Xen> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: wakeup code va 0xc72ab000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \_SB_.PCI0.ISA_.PIRQ -> bus 0 dev 1 func 0
ACPI timer: 0/15 0/16 0/13 0/12 0/14 0/21 0/66 0/18 0/9 0/126 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1f48-0x1f4b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 10 11
Validation 0 5 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 5 10 11
Validation 0 10 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 5 10 11
Validation 0 11 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 10 11
Validation 0 5 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 62500000 opts: legacy_route
64-bit
Timecounter "HPET" frequency 62500000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x1237, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7000, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7010, revid=0x00
domain=0, bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xc220, size 4, enabled
found-> vendor=0x8086, dev=0x7020, revid=0x01
domain=0, bus=0, slot=1, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0xc200, size 5, enabled
pcib0: matched entry for 0.1.INTD
pcib0: slot 1 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x7113, revid=0x01
domain=0, bus=0, slot=1, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 20
found-> vendor=0x1013, dev=0x00b8, revid=0x00
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 25,
enabled
map[14]: type Memory, range 32, base 0xf3000000, size 12, enabled
found-> vendor=0x5853, dev=0x0001, revid=0x01
domain=0, bus=0, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type I/O Port, range 32, base 0xc000, size 8, enabled
map[14]: type Prefetchable Memory, range 32, base 0xf2000000, size 24,
enabled
pcib0: matched entry for 0.3.INTC
pcib0: slot 3 INTC hardwired to IRQ 30
found-> vendor=0x10ec, dev=0x8139, revid=0x20
domain=0, bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type I/O Port, range 32, base 0xc100, size 8, enabled
map[14]: type Memory, range 32, base 0xf3001000, size 8, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 32
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc220-0xc22f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0xff msb=0xff
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x50 err=0x01 lsb=0xff msb=0xff
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=50 stat1=00 devices=0x20001
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc200-0xc21f irq 23
at device 1.2 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: controller did not stop
usbus0: <Intel 82371SB (PIIX3) USB controller> on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem
0xf0000000-0xf1ffffff,0xf3000000-0xf3000fff at device 2.0 on pci0
pci0: <mass storage, SCSI> at device 3.0 (no driver attached)
re0: <RealTek 8139C+ 10/100BaseTX> port 0xc100-0xc1ff mem
0xf3001000-0xf30010ff irq 32 at device 4.0 on pci0
re0: Chip rev. 0x74800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 0e:90:13:eb:42:84
ioapic0: routing intpin 32 (PCI IRQ 32) to lapic 0 vector 52
re0: [MPSAFE]
re0: [FILTER]
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0061
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 54
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq
4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 55
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 56
ppc0: [MPSAFE]
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
plip0: [MPSAFE]
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [MPSAFE]
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 245763 -> 100000
procfs registered
lapic: Divisor 2, Frequency 50000945 Hz
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Timecounter "TSC" frequency 1995028866 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00000001
ata0: New devices: 00000001
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
usbus0: 12Mbps Full Speed USB v1.0
ad0: setting WDMA2
ad0: 102400MB <QEMU HARDDISK 0.9.1> at ata0-master WDMA2
ad0: 209715200 sectors [208050C/16H/63S] 16 sectors/interrupt 1 depth queue
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Expensive timeout(9) function: 0xc08cee70(0xc7755900) 0.027107631 s
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1: Identifying devices: 00020001
ata1: New devices: 00020001
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x50 err=0x01 lsb=0xff msb=0xff
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=50 stat1=00 devices=0x20001
ata1: reinit done ..
unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
Expensive timeout(9) function: 0xc0571910(0xc7977bf4) 0.150055583 s
ugen0.2: <QEMU 0.9.1> at usbus0
ums0: <Endpoint1 Interrupt Pipe> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0xff msb=0xff
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=50 stat1=00 devices=0x20001
ata1: reinit done ..
unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
acd0: setting WDMA2
acd0: <QEMU DVD-ROM/0.9.1> CDROM drive at ata1 as slave
acd0: read 689KB/s (689KB/s), 512KB buffer, WDMA2
acd0: Reads:
acd0: Writes:
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x04000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
Roapicf0l:o wrtoaubtlien gc lienatpnine r4 s(taIrStAe dI
Q 4) to lapic 2 vector 48
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 4 vector 48
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 6 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 2 vector 49
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 4 vector 49
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 49
ioapic0: routing intpin 32 (PCI IRQ 32) to lapic 2 vector 50
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad0s1a
ct_to_ts([2010-01-29 21:47:24]) = 1264801644.000000000
start_init: trying /sbin/init
Entropy harvesti
- --
TJU13-ARIN
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.13 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJLY1d3AAoJEMSwVS7lr0OdZxYIAKLOkaU+V7h5GxGOastdUcl0
w6nwFHFHzVMzB+3AwaBBIfSkFIka8gzqqRm5uju47y5FmZ+BRoOVkmMmWNr9KWQK
3imj2DItQsCfqcpjMdMfcFNt71gY6XUQ9sK8RmbiVLSnXPqHYQNPgiDlBAqs+ntb
zMUEO/fiZmOgWjVmifdMvER6ytEJAV420lQ09PRK+6K8joKDRS7GjYzItfizaYg+
WOYJq6z1I2fFQBpX7AqbWzKIG8z4RSaboEMHG+HzkU1J8iLnwxTfkpsX2yipgo9E
xL6HokYkIx4xNi/cHzVkMDalSWGG2EAIqiK7B+y8TgrbHbDIgZEAc30eUyuMrvM=
=PVz9
-----END PGP SIGNATURE-----
More information about the freebsd-current
mailing list