Call for Test and Review: bwn(4) - another Broadcom Wireless
driver
Rohit Grover
rgrover1 at gmail.com
Sun Jan 3 03:27:03 UTC 2010
Hi,
Thanks a lot for writing a driver for Broadcom Wireless cards.
I have a BCM4321 on my laptop.
Upon loading ssb, I get the following on the console:
ssb0: <Unknown> mem 0xd0500000-0xd0503fff,0xd0000000-0xd00fffff irq 16 at
device 0.0 on pci2
ssb0: warn: multiple PCI(E) cores
ssb0: unsupportted coreid 0x817
Thereafter, upon loading bwn_v4_ucode and if_bwn, I get nothing on the
console; and the wlan interface doesn't
appear either.
Executing 'pciconfig -lv' after the above reveals the following about my
wireless card:
ssb0 at pci0:2:0:0: class=0x028000 card=0x0088106b chip=0x432814e4
rev=0x03
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom 432AGN 802.11a/b/g/draft-n Wi-Fi Solution
(BCM4321KFBG)'
class = network
Could you please help with this?
Regards,
Rohit.
On Wed, Dec 23, 2009 at 4:53 PM, Weongyo Jeong <weongyo.jeong at gmail.com>wrote:
> Hello,
>
> Now bwn(4) is available at the public and waiting test and review. The
> status of this driver is *alpha* so could make panics, warnings and
> errors. Please let me know if you encounter problems.
>
> The following NICs all I have are only tested on the little endian 64bit
> machine and big endian 32bit machine.
>
> - Broadcom BCM4306 802.11b/g Wireless
> - Broadcom BCM4318 802.11b/g Wireless
>
> I tested basic RX, TX and WPA association as STA mode and checked it
> worked.
>
> As you might know there are still a lot of TODO in the driver so you
> could see some verbose messages during testing so please ignore or let
> me know it makes problems.
>
> == How to build and load ==
>
> # cd /usr/src/sys
> # fetch http://people.freebsd.org/~weongyo/bwn_20091222.tar.gz
> # tar xzf bwn_20091222.tar.gz
> # cd modules/ssb
> # make && make install
> # cd ../..
> # cd modules/bwn
> # make && make install
> # cd somewhere
> # fetch http://people.freebsd.org/~weongyo/bwn_ports_20091222.tar.gz
> # tar xzf bwn_ports_20091222.tar.gz
> # cd sysutils/b43-fwcutter
> # make install clean
> # cd ../..
> # cd net/bwn-firmware-kmod
> # make install clean
> #
> # kldload ssb
> # kldload bwn_v4_ucode
> # kldload if_bwn
>
> regards,
> Weongyo Jeong
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>
More information about the freebsd-current
mailing list