8.0-B4, Broadcom bge0 not working, HP Proliant DL385, amd64
stuart cur
nevtic at area51.capnet.state.tx.us
Tue Sep 8 17:01:00 UTC 2009
In 8.0-B4 for amd64, bge does not recognize that there is an active
ethernet connection on bge0. Switching the cable to bge1 works correctly.
This seems to be the same issue as reported on July 21 by Oyvind Rakvag,
but I saw no response to that report.
Attached are the dmesg.boot, /var/log/messages, and output of pciconf -lv
from the very first boot.
stu
-------------- next part --------------
Sep 8 15:51:17 newsyslog[775]: logfile first created
Sep 8 15:51:17 syslogd: kernel boot file is /boot/kernel/kernel
Sep 8 15:51:17 kernel: Copyright (c) 1992-2009 The FreeBSD Project.
Sep 8 15:51:17 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Sep 8 15:51:17 kernel: The Regents of the University of California. All rights reserved.
Sep 8 15:51:17 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Sep 8 15:51:17 kernel: FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC 2009
Sep 8 15:51:17 kernel: root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Sep 8 15:51:17 kernel: WARNING: WITNESS option enabled, expect reduced performance.
Sep 8 15:51:17 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Sep 8 15:51:17 kernel: CPU: AMD Opteron(tm) Processor 270 (2004.55-MHz K8-class CPU)
Sep 8 15:51:17 kernel: Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Sep 8 15:51:17 kernel: Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Sep 8 15:51:17 kernel: Features2=0x1<SSE3>
Sep 8 15:51:17 kernel: AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
Sep 8 15:51:17 kernel: AMD Features2=0x2<CMP>
Sep 8 15:51:17 kernel: real memory = 2147483648 (2048 MB)
Sep 8 15:51:17 kernel: avail memory = 2054406144 (1959 MB)
Sep 8 15:51:17 kernel: ACPI APIC Table: <HP 00000083>
Sep 8 15:51:17 kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Sep 8 15:51:17 kernel: FreeBSD/SMP: 1 package(s) x 2 core(s)
Sep 8 15:51:17 kernel: cpu0 (BSP): APIC ID: 0
Sep 8 15:51:17 kernel: cpu1 (AP): APIC ID: 1
Sep 8 15:51:17 kernel: ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 20090521 tbfadt-707
Sep 8 15:51:17 kernel: ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 20090521 tbfadt-707
Sep 8 15:51:17 kernel: MADT: Forcing active-low polarity and level trigger for SCI
Sep 8 15:51:17 kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
Sep 8 15:51:17 kernel: ioapic1 <Version 1.1> irqs 24-27 on motherboard
Sep 8 15:51:17 kernel: ioapic2 <Version 1.1> irqs 28-31 on motherboard
Sep 8 15:51:17 kernel: ioapic3 <Version 1.1> irqs 32-35 on motherboard
Sep 8 15:51:17 kernel: ioapic4 <Version 1.1> irqs 36-39 on motherboard
Sep 8 15:51:17 kernel: kbd1 at kbdmux0
Sep 8 15:51:17 kernel: acpi0: <HP A05> on motherboard
Sep 8 15:51:17 kernel: acpi0: [ITHREAD]
Sep 8 15:51:17 kernel: acpi0: Power Button (fixed)
Sep 8 15:51:17 kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Sep 8 15:51:17 kernel: acpi_timer0: <32-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
Sep 8 15:51:17 kernel: pcib0: <ACPI Host-PCI bridge> on acpi0
Sep 8 15:51:17 kernel: pci0: <ACPI PCI bus> on pcib0
Sep 8 15:51:17 kernel: pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
Sep 8 15:51:17 kernel: pci1: <ACPI PCI bus> on pcib1
Sep 8 15:51:17 kernel: ohci0: <OHCI (generic) USB controller> mem 0xf7cf0000-0xf7cf0fff irq 19 at device 0.0 on pci1
Sep 8 15:51:17 kernel: ohci0: [ITHREAD]
Sep 8 15:51:17 kernel: usbus0: <OHCI (generic) USB controller> on ohci0
Sep 8 15:51:17 kernel: ohci1: <OHCI (generic) USB controller> mem 0xf7ce0000-0xf7ce0fff irq 19 at device 0.1 on pci1
Sep 8 15:51:17 kernel: ohci1: [ITHREAD]
Sep 8 15:51:17 kernel: usbus1: <OHCI (generic) USB controller> on ohci1
Sep 8 15:51:17 kernel: pci1: <base peripheral> at device 2.0 (no driver attached)
Sep 8 15:51:17 kernel: pci1: <base peripheral> at device 2.2 (no driver attached)
Sep 8 15:51:17 kernel: vgapci0: <VGA-compatible display> port 0x4400-0x44ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci1
Sep 8 15:51:17 kernel: isab0: <PCI-ISA bridge> at device 4.0 on pci0
Sep 8 15:51:17 kernel: isa0: <ISA bus> on isab0
Sep 8 15:51:17 kernel: atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 4.1 on pci0
Sep 8 15:51:17 kernel: ata0: <ATA channel 0> on atapci0
Sep 8 15:51:17 kernel: ata0: [ITHREAD]
Sep 8 15:51:17 kernel: ata1: <ATA channel 1> on atapci0
Sep 8 15:51:17 kernel: ata1: [ITHREAD]
Sep 8 15:51:17 kernel: pci0: <bridge> at device 4.3 (no driver attached)
Sep 8 15:51:17 kernel: pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
Sep 8 15:51:17 kernel: pci2: <ACPI PCI bus> on pcib2
Sep 8 15:51:17 kernel: ciss0: <HP Smart Array 6i> port 0x5000-0x50ff mem 0xf7df0000-0xf7df1fff,0xf7d80000-0xf7dbffff irq 24 at device 4.0 on pci2
Sep 8 15:51:17 kernel: ciss0: PERFORMANT Transport
Sep 8 15:51:17 kernel: ciss0: [ITHREAD]
Sep 8 15:51:17 kernel: pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0
Sep 8 15:51:17 kernel: pci3: <ACPI PCI bus> on pcib3
Sep 8 15:51:17 kernel: bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xf7ef0000-0xf7efffff irq 28 at device 6.0 on pci3
Sep 8 15:51:17 kernel: miibus0: <MII bus> on bge0
Sep 8 15:51:17 kernel: brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
Sep 8 15:51:17 kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Sep 8 15:51:17 kernel: bge0: Ethernet address: 00:17:a4:a7:eb:e4
Sep 8 15:51:17 kernel: bge0: [ITHREAD]
Sep 8 15:51:17 kernel: bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xf7ee0000-0xf7eeffff irq 29 at device 6.1 on pci3
Sep 8 15:51:17 kernel: miibus1: <MII bus> on bge1
Sep 8 15:51:17 kernel: brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
Sep 8 15:51:17 kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Sep 8 15:51:17 kernel: bge1: Ethernet address: 00:17:a4:a7:eb:e3
Sep 8 15:51:17 kernel: bge1: [ITHREAD]
Sep 8 15:51:17 kernel: pcib4: <ACPI Host-PCI bridge> on acpi0
Sep 8 15:51:17 kernel: pci4: <ACPI PCI bus> on pcib4
Sep 8 15:51:17 kernel: pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci4
Sep 8 15:51:17 kernel: pci5: <ACPI PCI bus> on pcib5
Sep 8 15:51:17 kernel: rl0: <RealTek 8139 10/100BaseTX> port 0x6000-0x60ff mem 0xf7ff0000-0xf7ff00ff irq 32 at device 8.0 on pci5
Sep 8 15:51:17 kernel: miibus2: <MII bus> on rl0
Sep 8 15:51:17 kernel: rlphy0: <RealTek internal media interface> PHY 0 on miibus2
Sep 8 15:51:17 kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sep 8 15:51:17 kernel: rl0: Ethernet address: 00:40:f4:ed:99:ec
Sep 8 15:51:17 kernel: rl0: [ITHREAD]
Sep 8 15:51:17 kernel: pcib6: <ACPI PCI-PCI bridge> at device 10.0 on pci4
Sep 8 15:51:17 kernel: pci6: <ACPI PCI bus> on pcib6
Sep 8 15:51:17 kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Sep 8 15:51:17 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Sep 8 15:51:17 kernel: kbd0 at atkbd0
Sep 8 15:51:17 kernel: atkbd0: [GIANT-LOCKED]
Sep 8 15:51:17 kernel: atkbd0: [ITHREAD]
Sep 8 15:51:17 kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Sep 8 15:51:17 kernel: psm0: [GIANT-LOCKED]
Sep 8 15:51:17 kernel: psm0: [ITHREAD]
Sep 8 15:51:17 kernel: psm0: model Generic PS/2 mouse, device ID 0
Sep 8 15:51:17 kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Sep 8 15:51:17 kernel: uart0: [FILTER]
Sep 8 15:51:17 kernel: fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
Sep 8 15:51:17 kernel: fdc0: [FILTER]
Sep 8 15:51:17 kernel: cpu0: <ACPI CPU> on acpi0
Sep 8 15:51:17 kernel: powernow0: <Cool`n'Quiet K8> on cpu0
Sep 8 15:51:17 kernel: cpu1: <ACPI CPU> on acpi0
Sep 8 15:51:17 kernel: powernow1: <Cool`n'Quiet K8> on cpu1
Sep 8 15:51:17 kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
Sep 8 15:51:17 kernel: sc0: <System console> at flags 0x100 on isa0
Sep 8 15:51:17 kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Sep 8 15:51:17 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Sep 8 15:51:17 kernel: atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
Sep 8 15:51:17 kernel: ppc0: cannot reserve I/O port range
Sep 8 15:51:17 kernel: uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
Sep 8 15:51:17 kernel: uart1: [FILTER]
Sep 8 15:51:17 kernel: Timecounters tick every 1.000 msec
Sep 8 15:51:17 kernel: usbus0: 12Mbps Full Speed USB v1.0
Sep 8 15:51:17 kernel: usbus1: 12Mbps Full Speed USB v1.0
Sep 8 15:51:17 kernel: ugen0.1: <AMD> at usbus0
Sep 8 15:51:17 kernel: uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Sep 8 15:51:17 kernel: ugen1.1: <AMD> at usbus1
Sep 8 15:51:17 kernel: uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Sep 8 15:51:17 kernel: acd0: CDRW <DW-224E-R/C.AB> at ata0-master UDMA33
Sep 8 15:51:17 kernel: uhub0: 3 ports with 3 removable, self powered
Sep 8 15:51:17 kernel: uhub1: 3 ports with 3 removable, self powered
Sep 8 15:51:17 kernel: da0 at ciss0 bus 0 target 0 lun 0
Sep 8 15:51:17 kernel: da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
Sep 8 15:51:17 kernel: da0: 135.168MB/s transfers
Sep 8 15:51:17 kernel: da0: Command Queueing enabled
Sep 8 15:51:17 kernel: da0: 70001MB (143363040 512 byte sectors: 255H 32S/T 17569C)
Sep 8 15:51:17 kernel: da1 at ciss0 bus 0 target 1 lun 0
Sep 8 15:51:17 kernel: da1: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
Sep 8 15:51:17 kernel: da1: 135.168MB/s transfers
Sep 8 15:51:17 kernel: da1: Command Queueing enabled
Sep 8 15:51:17 kernel: da1: 286097MB (585928220 512 byte sectors: 255H 32S/T 65535C)
Sep 8 15:51:17 kernel: SMP: AP CPU #1 Launched!
Sep 8 15:51:17 kernel: WARNING: WITNESS option enabled, expect reduced performance.
Sep 8 15:51:17 kernel: GEOM: da0: partition 1 does not start on a track boundary.
Sep 8 15:51:17 kernel: GEOM: da0: partition 1 does not end on a track boundary.
Sep 8 15:51:17 kernel: GEOM: da0s1: geometry does not match label (255h,63s != 255h,32s).
Sep 8 15:51:17 kernel: GEOM: da1: partition 1 does not start on a track boundary.
Sep 8 15:51:17 kernel: GEOM: da1: partition 1 does not end on a track boundary.
Sep 8 15:51:17 kernel: GEOM: da1s1: geometry does not match label (255h,63s != 255h,32s).
Sep 8 15:51:17 kernel: Trying to mount root from ufs:/dev/da0s1a
Sep 8 15:51:28 login: ROOT LOGIN (root) ON ttyv1
Sep 8 15:52:12 kernel: bge1: link state changed to UP
Sep 8 15:52:51 kernel: bge1: link state changed to DOWN
Sep 8 15:52:53 kernel: bge1: link state changed to UP
Sep 8 15:53:49 kernel: bge1: promiscuous mode enabled
Sep 8 15:54:12 kernel: bge1: promiscuous mode disabled
Sep 8 15:59:19 root: Unknown USB device: vendor 0x13fe product 0x1a21 bus uhub1
Sep 8 15:59:19 kernel: ugen1.2: <vendor 0x13fe> at usbus1
Sep 8 15:59:19 kernel: umass0: <vendor 0x13fe USB DISK Pro, class 0/0, rev 2.00/1.00, addr 2> on usbus1
Sep 8 15:59:19 kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000
Sep 8 15:59:20 kernel: umass0:3:0:-1: Attached to scbus3
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
Sep 8 15:59:21 kernel: da2 at umass-sim0 bus 0 target 0 lun 0
Sep 8 15:59:21 kernel: da2: < USB DISK Pro PMAP> Removable Direct Access SCSI-0 device
Sep 8 15:59:21 kernel: da2: 1.000MB/s transfers
Sep 8 15:59:21 kernel: da2: 1941MB (3976192 512 byte sectors: 255H 63S/T 247C)
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:1): UNIT ATTENTION asc:28,0
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:1): Not ready to ready change, medium may have changed
Sep 8 15:59:21 kernel: (probe0:umass-sim0:0:0:1): Retrying Command (per Sense Data)
Sep 8 15:59:21 kernel: da3 at umass-sim0 bus 0 target 0 lun 1
Sep 8 15:59:21 kernel: da3: < USB DISK Pro PMAP> Removable Direct Access SCSI-0 device
Sep 8 15:59:21 kernel: da3: 1.000MB/s transfers
Sep 8 15:59:21 kernel: da3: 24MB (50176 512 byte sectors: 64H 32S/T 24C)
Sep 8 15:59:22 kernel: GEOM: da2: partition 1 does not start on a track boundary.
Sep 8 15:59:22 kernel: GEOM: da2: partition 1 does not end on a track boundary.
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA4 #0: Sun Sep 6 04:44:31 UTC 2009
root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 270 (2004.55-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x2<CMP>
real memory = 2147483648 (2048 MB)
avail memory = 2054406144 (1959 MB)
ACPI APIC Table: <HP 00000083>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 20090521 tbfadt-707
ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 20090521 tbfadt-707
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-35 on motherboard
ioapic4 <Version 1.1> irqs 36-39 on motherboard
kbd1 at kbdmux0
acpi0: <HP A05> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xf7cf0000-0xf7cf0fff irq 19 at device 0.0 on pci1
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xf7ce0000-0xf7ce0fff irq 19 at device 0.1 on pci1
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
pci1: <base peripheral> at device 2.0 (no driver attached)
pci1: <base peripheral> at device 2.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0x4400-0x44ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 4.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <bridge> at device 4.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ciss0: <HP Smart Array 6i> port 0x5000-0x50ff mem 0xf7df0000-0xf7df1fff,0xf7d80000-0xf7dbffff irq 24 at device 4.0 on pci2
ciss0: PERFORMANT Transport
ciss0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xf7ef0000-0xf7efffff irq 28 at device 6.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:17:a4:a7:eb:e4
bge0: [ITHREAD]
bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xf7ee0000-0xf7eeffff irq 29 at device 6.1 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:17:a4:a7:eb:e3
bge1: [ITHREAD]
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci4
pci5: <ACPI PCI bus> on pcib5
rl0: <RealTek 8139 10/100BaseTX> port 0x6000-0x60ff mem 0xf7ff0000-0xf7ff00ff irq 32 at device 8.0 on pci5
miibus2: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus2
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:f4:ed:99:ec
rl0: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> at device 10.0 on pci4
pci6: <ACPI PCI bus> on pcib6
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FILTER]
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: cannot reserve I/O port range
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <AMD> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
acd0: CDRW <DW-224E-R/C.AB> at ata0-master UDMA33
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 70001MB (143363040 512 byte sectors: 255H 32S/T 17569C)
da1 at ciss0 bus 0 target 1 lun 0
da1: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 286097MB (585928220 512 byte sectors: 255H 32S/T 65535C)
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
GEOM: da0s1: geometry does not match label (255h,63s != 255h,32s).
GEOM: da1: partition 1 does not start on a track boundary.
GEOM: da1: partition 1 does not end on a track boundary.
GEOM: da1s1: geometry does not match label (255h,63s != 255h,32s).
Trying to mount root from ufs:/dev/da0s1a
-------------- next part --------------
pcib1 at pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x74601022 rev=0x07 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI Bridge (AMD-8111)'
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:4:0: class=0x060100 card=0x32030e11 chip=0x74681022 rev=0x05 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'LPC Bridge (AMD-8111)'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:4:1: class=0x01018a card=0x32040e11 chip=0x74691022 rev=0x03 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'UltraATA/133 Controller (AMD-8111)'
class = mass storage
subclass = ATA
none0 at pci0:0:4:3: class=0x068000 card=0x32050e11 chip=0x746b1022 rev=0x05 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-8111 ACPI System Management Controller'
class = bridge
pcib2 at pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x74501022 rev=0x12 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X Bridge (AMD-8131)'
class = bridge
subclass = PCI-PCI
ioapic0 at pci0:0:7:1: class=0x080010 card=0x00000000 chip=0x74511022 rev=0x01 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X IOAPIC (AMD-8131)'
class = base peripheral
subclass = interrupt controller
pcib3 at pci0:0:8:0: class=0x060400 card=0x00000000 chip=0x74501022 rev=0x12 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X Bridge (AMD-8131)'
class = bridge
subclass = PCI-PCI
ioapic1 at pci0:0:8:1: class=0x080010 card=0x00000000 chip=0x74511022 rev=0x01 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X IOAPIC (AMD-8131)'
class = base peripheral
subclass = interrupt controller
hostb0 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb1 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
class = bridge
subclass = HOST-PCI
hostb2 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb3 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control'
class = bridge
subclass = HOST-PCI
ohci0 at pci0:1:0:0: class=0x0c0310 card=0x32020e11 chip=0x74641022 rev=0x0b hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'USB OpenHCI Host Controller (AMD-8111)'
class = serial bus
subclass = USB
ohci1 at pci0:1:0:1: class=0x0c0310 card=0x32020e11 chip=0x74641022 rev=0x0b hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'USB OpenHCI Host Controller (AMD-8111)'
class = serial bus
subclass = USB
none1 at pci0:1:2:0: class=0x088000 card=0xb2060e11 chip=0xb2030e11 rev=0x01 hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'Integrated Lights Out Processor (iLo)'
class = base peripheral
none2 at pci0:1:2:2: class=0x088000 card=0xb2060e11 chip=0xb2040e11 rev=0x01 hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'Integrated Lights Out Processor (iLo)'
class = base peripheral
vgapci0 at pci0:1:3:0: class=0x030000 card=0x001e0e11 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL PCI)'
class = display
subclass = VGA
ciss0 at pci0:2:4:0: class=0x010400 card=0x40910e11 chip=0x00460e11 rev=0x01 hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'Smart Array 64xx/6i Controller'
class = mass storage
subclass = RAID
bge0 at pci0:3:6:0: class=0x020000 card=0x00d00e11 chip=0x164814e4 rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
class = network
subclass = ethernet
bge1 at pci0:3:6:1: class=0x020000 card=0x00d00e11 chip=0x164814e4 rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
class = network
subclass = ethernet
pcib5 at pci0:4:9:0: class=0x060400 card=0x00000000 chip=0x74501022 rev=0x12 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X Bridge (AMD-8131)'
class = bridge
subclass = PCI-PCI
ioapic2 at pci0:4:9:1: class=0x080010 card=0x00000000 chip=0x74511022 rev=0x01 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X IOAPIC (AMD-8131)'
class = base peripheral
subclass = interrupt controller
pcib6 at pci0:4:10:0: class=0x060400 card=0x00000000 chip=0x74501022 rev=0x12 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X Bridge (AMD-8131)'
class = bridge
subclass = PCI-PCI
ioapic3 at pci0:4:10:1: class=0x080010 card=0x00000000 chip=0x74511022 rev=0x01 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'PCI-X IOAPIC (AMD-8131)'
class = base peripheral
subclass = interrupt controller
rl0 at pci0:5:8:0: class=0x020000 card=0xc10f1259 chip=0x813910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Realtek RTL8139 Family PCI Fast Ethernet NIC (RTL-8139/8139C/8139C)'
class = network
subclass = ethernet
More information about the freebsd-current
mailing list