HEADSUP: uath(4) has been committed.

[Weongyo Jeong]

On Thu, May 21, 2009 at 01:48:31PM -0500, Sam Fourman Jr. wrote:
> I have a uath device the Engenius NUB-362-EXT, it will not attach to
> the uath driver
> it says ugen7.3: <Atheros Communications Inc> at usbus7
> 
> I should note that this device attaches in OpenBSD 4.x
> I am running FreeBSD 8 -CURRENT as of 10 hours ago, I do not know the
> usb2 equivalent of usbdevs -v
> 
> I am confused as to why this device will not attach to uath, I have
> the driver loaded with kldload if_uath
> 
> I do not know if this will help, but here is output from OpenBSD 4.5
> after you plugin the device I get:
> 
> uath0 at uhub0 port 5 "Atheros Communications Inc AR5523" rev 2.00/0.01 addr 2
> uath0 detached
> uath0 at uhub0 port 5 "Atheros Communications Inc AR5523" rev 2.00/0.01 addr 2
> uath0: MAC/BBP AR5523, RF AR2112, address 00:02:6f:3d:66:58
> 
> usbdevs -v
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
>  port 1 powered
>  port 2 powered
>  port 3 powered
>  port 4 powered
>  port 5 addr 2: high speed, power 500 mA, config 1, AR5523(0x0001),
> Atheros Communications Inc(0x0cf3), rev 0.01, iSerialNumber 1.0
>  port 6 powered
>  port 7 powered
>  port 8 powered

Did you try to upload the firmware using uathload(8) like as follow
after loading if_uath module?

	# /usr/sbin/uathload -d /dev/ugen7.3

regards,
Weongyo Jeong