last update and oldest ati|drm problems
Alex Keda
admin at lissyara.su
Sun Mar 22 13:38:45 PDT 2009
Robert Noland пишет:
> On Sun, 2009-03-22 at 22:03 +0300, Alex Keda wrote:
>> Robert Noland пишет:
>>> On Sun, 2009-03-22 at 21:06 +0300, Alex Keda wrote:
>>>> Robert Noland пишет:
>>>>> On Sun, 2009-03-22 at 17:26 +0300, Alex Keda wrote:
>>>>>> (II) RADEON(0): XAA Render acceleration unsupported on Radeon
>>>>>> 9500/9700 and newer. Please use EXA instead.
>>>>> Everything looks like it's ok, except that you should be using EXA.
>>>>>
>>>>> Option "AccelMethod" "EXA"
>>>> I'm not using Xorg.conf - I always start without it - all work OK.
>>>> X-system by oneself configure all parameters.
>>>>
>>>>> What was the last working kernel?
>>>> FreeBSD HP.lissyara.su 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sat Mar 14
>>>> 19:08:30 MSK 2009
>>>> lissyara at HP.lissyara.su:/usr/obj/usr/src/sys/GENERIC amd64
>>>>
>>>> >Actually, It looks like maybe it is waiting on hald? Did you just
>>>> switch to usb2?
>>>> Yes, I use GENERIC. But, old kernel with new USB stack and work correct.
>>> Please make sure that hald is running and that lshal shows you mouse and
>>> keyboard before we go digging any further.
>> it show my mouse, my keyboard and my touchpad
>>
>>> The rs690 is picky about how the gart is allocated, but I had the flags
>>> to bus_dmamem applied incorrectly. It should not have caused an issue
>>> and all of the allocations look to be correct.
>>>
>>> You should probably not be running configless on this chip, as the
>>> defaults are not optimum for it.
>> I remove drm.ko and radeon.ko from /boot/kernel and copy it from
>> /boot/kernel.old
>> With new kernel and old modules - all work excellent.
>
> Ok, after a little discussion and looking at the bus_dma code... The
> documentation is incorrect. I'll fix this up shortly...
Big Thanks!
More information about the freebsd-current
mailing list