Is iwn drivers working on Current ?

[Olivier Cochard-Labbé]

> Is iwnfw loaded in kernel?

Yes, iwnfw is loaded:

[root at d630]~#kldstat | grep iwnfw
 8    1 0xffffffff80c2c000 2ed22    iwnfw.ko

> What happens if you enable iwn debug sysctl.


[root at d630]~#sysctl dev.iwn.0.debug=1
dev.iwn.0.debug: 0 -> 1
[root at d630]~#sysctl dev.iwn
dev.iwn.0.%desc: Intel(R) PRO/Wireless 4965BGN
dev.iwn.0.%driver: iwn
dev.iwn.0.%location: slot=0 function=0 handle=\_SB_.PCI0.RP02.PXS2
dev.iwn.0.%pnpinfo: vendor=0x8086 device=0x4229 subvendor=0x8086
subdevice=0x1121 class=0x028000
dev.iwn.0.%parent: pci12
dev.iwn.0.debug: 1
[root at d630]~#ifconfig wlan create wlandev iwn0
wlan0
[root at d630]~#ifconfig wlan0 country fr
[root at d630]~#ifconfig wlan0 up
[root at d630]~#wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
(I send break signal after few second)
^CCTRL-EVENT-TERMINATING - signal 2 received
ioctl[SIOCS80211, op 26, arg 0x0]: Operation not supported
Failed to disable WPA in the driver.
ELOOP: remaining socket: sock=4 eloop_data=0x800e091c0
user_data=0x800e050f0 handler=0x41fb19


And here is the dmesg file contents:

wlan0: Ethernet address: 00:1d:e0:72:10:01
iwn0: need multicast update callback
iwn0: need multicast update callback
iwn0: need multicast update callback
iwn0: need multicast update callback
iwn_notif_intr: scanning channel 1 status 1
iwn_notif_intr: scanning channel 6 status 1
iwn_notif_intr: scanning channel 11 status 1
iwn_notif_intr: scanning channel 7 status 1
iwn0: error, INTR=2000000<SW_ERROR> STATUS=0x0
iwn0: iwn_transfer_firmware: timeout waiting for first alive notice, error 35
iwn0: iwn_init_locked: could not load firmware, error 35

The debug mode didn't give me more information than the "iwn_notif_intr" ?

Regards,

Olivierr