ata cable on CURRENT
barbara.xxx1975 at libero.it
Mon Jun 29 17:06:26 UTC 2009
sorry for asking again but nothing changed in the meanwhile.
# uname -a
FreeBSD satanasso.local.net 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sat Feb 21 05:58:23 CEST 2009 root at satanasso.local.net:/usr/obj/usr/src/sys/SATANASSO i386
In my dmesg I have:
atapci2: <VIA 8237A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ad0: DMA limited to UDMA33, device found non-ATA66 cable
ad0: 152627MB <MAXTOR STM3160212A 3.AAJ> at ata0-master UDMA33
ad1: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata0-slave UDMA133
# atacontrol info ata0
Master: ad0 <MAXTOR STM3160212A/3.AAJ> ATA/ATAPI revision 7
Slave: ad1 <Maxtor 6Y120L0/YAR41BW0> ATA/ATAPI revision 7
So, if ad0 and ad1 are both attached with the same cable, why ad0 should be limited while ad1 is not?
On 7-STABLE, I have:
ad0: 152627MB <MAXTOR STM3160212A 3.AAJ> at ata0-master UDMA100
which seems correct.
I've also replaced the cable with a brand new one, with the same results.
So, what's wrong?
Anyone knows what could be the problem?
I wonder if I should be worried about my HW.
More information about the freebsd-current