ulpt problem (USB_ERR_IOERROR)
Hans Petter Selasky
hselasky at c2i.net
Fri Jul 3 15:57:23 UTC 2009
On Friday 03 July 2009 17:26:00 Patrick Lamaiziere wrote:
> [Yesterday CURRENT/i386]
> I've got some troubles with unlpt, most of the time I can't print and I
> must stop cupsd, kill -9 the process usb, and unplug the USB printer.
> Then it works again for some time (but mostly one time).
> The printer is a Brother HL-1430 (working fine under FreeBSD since
> FreeBSD 4.X)
> ulpt0: <Brother Industries product 0x001a, class 0/0, rev 1.00/1.00,
> addr 2> on usbus0
> ulpt_attach:562: setting alternate config number: 0
> ulpt0: using bi-directional mode
> With hw.usb.ulpt.debug=1, I've got a lot of:
> ulpt_write_callback:204: state=0x0 actlen=0
> ulpt_status_callback:328: error=USB_ERR_IOERROR
> last message repeated 31 times
> last message repeated 78 times
> When it works:
> ulpt_write_callback:220: state=0x0 actlen=0
> ulpt_write_callback:220: state=0x1 actlen=2889
> ulpt_write_callback:220: state=0x1 actlen=3023
Have you tried:
usbconfig -u XXX -a YYY reset
Does it help?
To me it looks like a problem about your printer USB firmware. Does it respond
usbconfig -u XXX -a YYY dump_curr_config_desc
After the first print job?
XXX and YYY are the numbers after the "ugen" in dmesg.
More information about the freebsd-current