FreeBSD 8 BETA3 unusable (kbd/syscons?)
Nathan Lay
nlay at fsu.edu
Wed Aug 26 18:49:15 UTC 2009
Hi list,
I can't seem to do anything with FreeBSD 8 BETA3. Whenever I try to do
anything from a syscons terminal (ttyv#) the system freezes and requires
a hard reboot. The longest run I got was last night for about 10 hours
while doing a portupgrade (X is not an option until then) before it
froze. Today, I saw it panic for the first time. It stopped at
kbd_enter and kbd_why, but I didn't have savecore turned on to provide
more detail. I've also seen it freeze in what appeared to be due to
mouse movement and syscons savers but I can't verify this because the
system does not panic, it freezes hard. I'll try to reproduce this but
it almost always freezes rather than panic. I had another laptop do
this to me in earlier -CURRENT revisions and disregarded it as possible
failing hardware. But both laptops ran FreeBSD 7 and very early -CURRENT
without these instabilities. I've attached uname, dmesg, my kernel
config and rc.conf for any clues. I will try my best to reproduce the
panic and post my findings.
Nate
-------------- next part --------------
FreeBSD 8.0-BETA3 FreeBSD 8.0-BETA3 #0: Tue Aug 25 20:45:06 EDT 2009 root at LIGHTBULB.LOCAL:/usr/obj/usr/src/sys/LIGHTBULB i386
-------------- next part --------------
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.2 2009/08/13 17:54:11 attilio Exp $
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident LIGHTBULB
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env "GENERIC.env"
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options GEOM_JOURNAL # Provides journaling
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options FLOWTABLE # per-cpu routing cache
#options KDTRACE_HOOKS # Kernel DTrace hooks
# Debugging for use in -current
options KDB # Enable kernel debugger support.
options DDB # Support DDB.
options GDB # Support remote GDB.
options INVARIANTS # Enable calls of extra sanity checking
options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
options WITNESS # Enable checks to detect deadlocks and cycles
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_CDNR
options ALTQ_PRIQ
device pf
device pflog
device pfsync
device if_bridge
# To make an SMP kernel, the next two lines are needed
#options SMP # Symmetric MultiProcessor Kernel
#device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 Gigabit Ethernet Family
#device igb # Intel PRO/1000 PCIE Server Gigabit Family
#device ixgb # Intel PRO/10GbE Ethernet Card
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device ae # Attansic/Atheros L2 FastEthernet
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device alc # Atheros AR8131/AR8132 Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s D3.0 support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
#device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # pci/cardbus chip support
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device rum # Ralink Technology RT2501USB wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs
#device uath # Atheros AR5523 wireless NICs
#device zyd # ZyDAS zb1211/zb1211b wireless NICs
#device urio # Diamond Rio 500 MP3 player
# USB Serial devices
device ucom # Generic com ttys
#device u3g # USB-based 3G modems (Option, Huawei, Sierra)
#device uark # Technologies ARK3116 based serial adapters
#device ubsa # Belkin F5U103 and compatible serial adapters
#device uftdi # For FTDI usb serial adapters
#device uipaq # Some WinCE based devices
device uplcom # Prolific PL-2303 serial adapters
#device uslcom # SI Labs CP2101/CP2102 serial adapters
#device uvisor # Visor and Palm devices
#device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
#device udav # Davicom DM9601E USB
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
#device fwip # IP over FireWire (RFC 2734,3146)
#device dcons # Dumb console driver
#device dcons_crom # Configuration ROM for dcons
-------------- next part --------------
# -- sysinstall generated deltas -- # Mon Feb 18 17:25:32 2008
# Created: Mon Feb 18 17:25:32 2008
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
hostname="LIGHTBULB.LOCAL"
moused_enable="NO"
moused_flags="-3"
saver="NO"
sshd_enable="YES"
powerd_enable="NO"
powerd_flags="-n adaptive -a adaptive -b adaptive"
cupsd_enable="NO"
cloned_interfaces="bridge0"
ifconfig_bridge0="inet 172.20.0.1 netmask 0xffff0000 up"
#ifconfig_iwi0="WPA DHCP"
noip_enable="NO"
dbus_enable="NO"
hald_enable="NO"
ipv6_enable="NO"
nfs_client_enable="YES"
nfs_client_flags="-n 4"
#nfs_server_enable="YES"
rpc_lockd_enable="YES"
rpc_statd_enable="YES"
pf_enable="YES"
pf_rules="/etc/pf.conf"
pf_flags=""
pflog_enable="YES"
pflog_logfile="/var/log/pflog"
pflog_flags=""
gateway_enable="YES"
named_enable="NO"
dhcpd_enable="NO"
# -- sysinstall generated deltas -- # Sun Mar 9 21:29:39 2008
ntpdate_flags="us.pool.ntp.org"
ntpdate_enable="YES"
nfs_server_flags="-u -t -n 4"
mountd_flags="-r"
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA3 #0: Tue Aug 25 20:45:06 EDT 2009
root at LIGHTBULB.LOCAL:/usr/obj/usr/src/sys/LIGHTBULB
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
real memory = 1610612736 (1536 MB)
avail memory = 1563512832 (1491 MB)
kbd1 at kbdmux0
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-625
ACPI Warning: Optional field Gpe1Block has zero address or length: 0 102C/0 20090521 tbfadt-655
acpi0: <IBM TP-1Y> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xc0000000-0xc7ffffff,0xb0100000-0xb010ffff irq 11 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xb0200000-0xb020ffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:15:58:09:1b:e7
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 11 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff irq 11 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib4
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb4000000-0xb4000fff irq 11 at device 0.0 on pci11
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
pci11: <network> at device 2.0 (no driver attached)
pci0: <multimedia, audio> at device 30.2 (no driver attached)
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x278-0x27f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd1800-0xd27ff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1862134244 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 57231MB <HTS541060G9AT00 MB3IA60A> at ata0-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4242N/0201> at ata1-master UDMA33
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
GEOM_JOURNAL: Journal 273940673: ad0s1e contains data.
GEOM_JOURNAL: Journal 273940673: ad0s1e contains journal.
GEOM_JOURNAL: Journal ad0s1e consistent.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
ugen2.2: <STMicroelectronics> at usbus2
ugen4.2: <SanDisk> at usbus4
umass0: <ms ifac 1 (SCSI::BULK_ONLY)> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk Sansa Clip 4GB v02.> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3751MB (7683072 512 byte sectors: 255H 63S/T 478C)
More information about the freebsd-current
mailing list