8.0-BETA2: mi_startup() panic on VIA C7 diskless
Arno J. Klaassen
arno at heho.snv.jussieu.fr
Tue Aug 11 23:25:55 UTC 2009
Kip Macy <kmacy at freebsd.org> writes:
> Please try the following patch:
>
> http://people.freebsd.org/~kmacy/flowtable_boot.patch
yeah, this works over here. Thank you very much.
Just for completeness, here is my local patch; apart
from the parenthesis issue I also needed to add
the
#define V_flowtable_ready VNET(flowtable_ready)
in order to make it compile
Best regards,
Arno
###
Index: net/flowtable.c
===================================================================
--- net/flowtable.c (revision 196087)
+++ net/flowtable.c (working copy)
@@ -203,8 +203,10 @@
static VNET_DEFINE(int, flowtable_fin_wait_expire) = FIN_WAIT_IDLE;
static VNET_DEFINE(int, flowtable_tcp_expire) = TCP_IDLE;
static VNET_DEFINE(int, flowtable_nmbflows) = 4096;
+static VNET_DEFINE(int, flowtable_ready) = 0;
#define V_flowtable_enable VNET(flowtable_enable)
+#define V_flowtable_ready VNET(flowtable_ready)
#define V_flowtable_hits VNET(flowtable_hits)
#define V_flowtable_lookups VNET(flowtable_lookups)
#define V_flowtable_misses VNET(flowtable_misses)
@@ -345,7 +347,7 @@
struct udphdr *uh;
struct sctphdr *sh;
- if (V_flowtable_enable == 0)
+ if ((V_flowtable_enable == 0) || (V_flowtable_ready == 0))
return (0);
key[1] = key[0] = 0;
@@ -799,6 +801,7 @@
NULL, NULL, NULL, NULL, 64, UMA_ZONE_MAXBUCKET);
uma_zone_set_max(V_flow_ipv4_zone, V_flowtable_nmbflows);
uma_zone_set_max(V_flow_ipv6_zone, V_flowtable_nmbflows);
+ V_flowtable_ready = 1;
}
VNET_SYSINIT(flowtable_init, SI_SUB_KTHREAD_INIT, SI_ORDER_ANY,
>
>
> On Tue, Aug 11, 2009 at 9:27 AM, Arno J.
> Klaassen<arno at heho.snv.jussieu.fr> wrote:
>>
>> Robert Noland <rnoland at FreeBSD.org> writes:
>>
>>> On Mon, 2009-08-10 at 18:40 +0200, Arno J. Klaassen wrote:
>>>> Hello,
>>>>
>>>> I get the following panic when pxebooting a 8.0-BETA2 on a
>>>> VIA-C7-MB. The kernel is cross-build from a clean amd64-7-stable
>>>> and I defined CPUTYPE?=pentiumpro in make.conf.
>>>>
>>>> Let me know what I can provide more as info to get around this.
>>>
>>> I've seen this as well. You can disable apic which I see has been
>>> suggested. The NMI seems to be generated by HWPMC_HOOKS, in my case
>>> removing it from the GENERIC config allows it to boot and use apic. I'm
>>> not certain what the correct fix is, but after talking to jkoshy@ we did
>>> find the specific point in the HWPMC_HOOKS code that triggers this,
>>> which can be disabled by testing for CPU_VENDOR_CENTAUR.
>>>
>>> The attached hack should get things booting...
>>
>>
>> Correct. It now boots OK with apic enabled (but still panics
>> at the 'flowtable bug').
>> Thanks.
>>
>> Arno
>>
>>
>>> robert.
>>>
>>>> Thanks in advance.
>>>>
>>>> Best, Arno
>>>>
>>>>
>>>>
>>>> #####
>>>>
>>>> OK boot -sv
>>>> KDB: debugger backends: ddb
>>>> KDB: current backend: ddb
>>>> SMAP type=01 base=0000000000000000 len=000000000009f800
>>>> SMAP type=02 base=000000000009f800 len=0000000000000800
>>>> SMAP type=02 base=00000000000f0000 len=0000000000010000
>>>> SMAP type=01 base=0000000000100000 len=000000007bde0000
>>>> SMAP type=04 base=000000007bee0000 len=0000000000003000
>>>> SMAP type=03 base=000000007bee3000 len=000000000000d000
>>>> SMAP type=02 base=000000007bef0000 len=0000000000010000
>>>> SMAP type=02 base=00000000e0000000 len=0000000010000000
>>>> SMAP type=02 base=00000000fec00000 len=0000000000001000
>>>> SMAP type=02 base=00000000fee00000 len=0000000000001000
>>>> SMAP type=02 base=00000000ffff0000 len=0000000000010000
>>>> Copyright (c) 1992-2009 The FreeBSD Project.
>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>>> The Regents of the University of California. All rights reserved.
>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>> FreeBSD 8.0-BETA2 #1 r196087M: Mon Aug 10 15:16:20 CEST 2009
>>>> toor at push:/raid1/obj/i386/raid1/bsd/8/src/sys/C7-FW
>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>> WARNING: DIAGNOSTIC option enabled, expect reduced performance.
>>>> MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:
>>>> MEMGUARD map base: 0xc4c00000
>>>> MEMGUARD map limit: 0xc6c01000
>>>> MEMGUARD map size: 33558528 (Bytes)
>>>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bdc000.
>>>> Timecounter "i8254" frequency 1193182 Hz quality 0
>>>> Calibrating TSC clock ... TSC clock: 999896638 Hz
>>>> CPU: VIA C7 Processor 1000MHz (999.90-MHz 686-class CPU)
>>>> Origin = "CentaurHauls" Id = 0x6d0 Stepping = 0
>>>> Features=0xa7c9bbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
>>>> Features2=0x4181<SSE3,EST,TM2,xTPR>
>>>> VIA Padlock Features=0xffcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA>
>>>> real memory = 2079195136 (1982 MB)
>>>> Physical memory chunk(s):
>>>> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
>>>> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>>>> 0x0000000000c26000 - 0x0000000079baffff, 2029559808 bytes (495498 pages)
>>>> avail memory = 2027855872 (1933 MB)
>>>> Table 'FACP' at 0x7bee3080
>>>> Table 'MCFG' at 0x7bee6ec0
>>>> Table 'APIC' at 0x7bee6e40
>>>> MADT: Found table at 0x7bee6e40
>>>> MP Configuration Table version 1.4 found at 0xc00f1ce0
>>>> APIC: Using the MADT enumerator.
>>>> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
>>>> SMP: Added CPU 0 (AP)
>>>> ACPI APIC Table: <VX800 AWRDACPI>
>>>> APIC: CPU 0 has ACPI ID 0
>>>> bios32: Found BIOS32 Service Directory header at 0xc00f8f70
>>>> bios32: Entry = 0xf9580 (c00f9580) Rev = 0 Len = 1
>>>> pcibios: PCI BIOS entry at 0xf0000+0x95d0
>>>> pnpbios: Found PnP BIOS data at 0xc00fa110
>>>> pnpbios: Entry = f0000:a140 Rev = 1.0
>>>> Other BIOS signatures found:
>>>> ULE: setup cpu 0
>>>> ACPI: RSDP 0xf79d0 00014 (v0 VX800 )
>>>> ACPI: RSDT 0x7bee3000 00030 (v1 VX800 AWRDACPI 42302E31 AWRD 00000000)
>>>> ACPI: FACP 0x7bee3080 00074 (v1 VX800 AWRDACPI 42302E31 AWRD 00000000)
>>>> ACPI: DSDT 0x7bee3100 03D16 (v1 VX800 AWRDACPI 00001000 MSFT 03000000)
>>>> ACPI: FACS 0x7bee0000 00040
>>>> ACPI: MCFG 0x7bee6ec0 0003C (v1 VX800 AWRDACPI 42302E31 AWRD 00000000)
>>>> ACPI: APIC 0x7bee6e40 00066 (v1 VX800 AWRDACPI 42302E31 AWRD 00000000)
>>>> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>>>> ioapic0: Routing external 8259A's -> intpin 0
>>>> MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000
>>>> MADT: Interrupt override: source 0, irq 2
>>>> ioapic0: Routing IRQ 0 -> intpin 2
>>>> MADT: Interrupt override: source 9, irq 9
>>>> ioapic0: intpin 9 trigger: level
>>>> ioapic0: intpin 9 polarity: low
>>>> lapic0: Routing NMI -> LINT1
>>>> lapic0: LINT1 trigger: edge
>>>> lapic0: LINT1 polarity: high
>>>> ioapic0 <Version 0.3> irqs 0-23 on motherboard
>>>> ioapic1 <Version 0.3> irqs 24-47 on motherboard
>>>> cpu0 BSP:
>>>> ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>>>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>>>> timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
>>>> null: <null device, zero device>
>>>> nfslock: pseudo-device
>>>> random: <entropy source, Hardware, VIA Nehemiah>
>>>> io: <I/O>
>>>> kbd: new array size 4
>>>> kbd1 at kbdmux0
>>>> mem: <memory>
>>>> npx0: INT 16 interface
>>>> acpi0: <VX800 AWRDACPI> on motherboard
>>>> PCIe: Memory Mapped configuration base @ 0xe0000000
>>>> pcibios: BIOS version 3.00
>>>> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>>>> acpi0: [MPSAFE]
>>>> acpi0: [ITHREAD]
>>>> acpi0: Power Button (fixed)
>>>> acpi0: wakeup code va 0xc4b9c000 pa 0x1000
>>>> AcpiOsDerivePciId: \_SB_.PCI0.IDEC.SAPR -> bus 0 dev 15 func 0
>>>> AcpiOsDerivePciId: \_SB_.PCI0.USB1.U2F0 -> bus 0 dev 16 func 0
>>>> AcpiOsDerivePciId: \_SB_.PCI0.USB2.U2F1 -> bus 0 dev 16 func 1
>>>> AcpiOsDerivePciId: \_SB_.PCI0.USB3.U2F2 -> bus 0 dev 16 func 2
>>>> AcpiOsDerivePciId: \_SB_.PCI0.EHCI.U2F4 -> bus 0 dev 16 func 4
>>>> AcpiOsDerivePciId: \_SB_.PCI0.AZAC.AZAR -> bus 0 dev 20 func 0
>>>> AcpiOsDerivePciId: \_SB_.PCI0.PEXG.RPXG -> bus 0 dev 2 func 0
>>>> AcpiOsDerivePciId: \_SB_.PCI0.PEX0.RPX0 -> bus 0 dev 3 func 0
>>>> AcpiOsDerivePciId: \_SB_.PCI0.PEX1.RPX1 -> bus 0 dev 3 func 1
>>>> AcpiOsDerivePciId: \_SB_.PCI0.P2PB.P2PR -> bus 0 dev 19 func 0
>>>> AcpiOsDerivePciId: \_SB_.PCI0.VT86.VTSB -> bus 0 dev 17 func 0
>>>> acpi0: reservation of 0, a0000 (3) failed
>>>> acpi0: reservation of 100000, 7bde0000 (3) failed
>>>> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
>>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>>>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>>>> pci_link0: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 10 N 0 3 4 6 7 10 11 12
>>>> Validation 0 10 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> pci_link1: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 11 N 0 3 4 6 7 10 11 12
>>>> Validation 0 11 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> pci_link2: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 7 N 0 3 4 6 7 10 11 12
>>>> Validation 0 7 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> pci_link3: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 5 N 0 3 4 6 7 10 11 12
>>>> Validation 0 255 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> pci_link4: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 255 N 0 3 4 6 7 10 11 12
>>>> Validation 0 255 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> pci_link5: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 255 N 0 3 4 6 7 10 11 12
>>>> Validation 0 255 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> pci_link6: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 255 N 0 3 4 6 7 10 11 12
>>>> Validation 0 255 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> pci_link7: Index IRQ Rtd Ref IRQs
>>>> Initial Probe 0 11 N 0 3 4 6 7 10 11 12
>>>> Validation 0 11 N 0 3 4 6 7 10 11 12
>>>> After Disable 0 255 N 0 3 4 6 7 10 11 12
>>>> acpi_button0: <Power Button> on acpi0
>>>> acpi_button1: <Sleep Button> on acpi0
>>>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>>>> pci0: <ACPI PCI bus> on pcib0
>>>> pci0: domain=0, physical bus=0
>>>> found-> vendor=0x1106, dev=0x0353, revid=0x11
>>>> domain=0, bus=0, slot=0, func=0
>>>> class=06-00-00, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords)
>>>> lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x1353, revid=0x00
>>>> domain=0, bus=0, slot=0, func=1
>>>> class=06-00-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x2353, revid=0x00
>>>> domain=0, bus=0, slot=0, func=2
>>>> class=06-00-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x3353, revid=0x00
>>>> domain=0, bus=0, slot=0, func=3
>>>> class=06-00-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x4353, revid=0x00
>>>> domain=0, bus=0, slot=0, func=4
>>>> class=06-00-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x5353, revid=0x00
>>>> domain=0, bus=0, slot=0, func=5
>>>> class=08-00-20, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0006, statreg=0x0000, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x6353, revid=0x00
>>>> domain=0, bus=0, slot=0, func=6
>>>> class=06-00-00, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0006, statreg=0x0000, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x7353, revid=0x00
>>>> domain=0, bus=0, slot=0, func=7
>>>> class=06-00-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x1122, revid=0x11
>>>> domain=0, bus=0, slot=1, func=0
>>>> class=03-00-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0007, statreg=0x3010, cachelnsz=0 (dwords)
>>>> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> intpin=a, irq=10
>>>> powerspec 2 supports D0 D1 D2 D3 current D0
>>>> MSI supports 1 message
>>>> map[10]: type Prefetchable Memory, range 32, base 0xd8000000, size 26, enabled
>>>> map[14]: type Memory, range 32, base 0xde000000, size 24, enabled
>>>> map[18]: type Memory, range 32, base 0xc0000000, size 28, enabled
>>>> pcib0: matched entry for 0.1.INTA
>>>> pcib0: slot 1 INTA hardwired to IRQ 16
>>>> found-> vendor=0x1106, dev=0xc353, revid=0x00
>>>> domain=0, bus=0, slot=2, func=0
>>>> class=06-04-00, hdrtype=0x01, mfdev=0
>>>> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>>>> intpin=a, irq=11
>>>> powerspec 2 supports D0 D3 current D0
>>>> MSI supports 1 message, 64 bit, vector masks
>>>> pcib0: matched entry for 0.2.INTA
>>>> pcib0: slot 2 INTA hardwired to IRQ 27
>>>> found-> vendor=0x1106, dev=0xe353, revid=0x00
>>>> domain=0, bus=0, slot=3, func=0
>>>> class=06-04-00, hdrtype=0x01, mfdev=1
>>>> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>>>> intpin=a, irq=11
>>>> powerspec 2 supports D0 D3 current D0
>>>> MSI supports 1 message, 64 bit, vector masks
>>>> pcib0: matched entry for 0.3.INTA
>>>> pcib0: slot 3 INTA hardwired to IRQ 31
>>>> found-> vendor=0x1106, dev=0xf353, revid=0x00
>>>> domain=0, bus=0, slot=3, func=1
>>>> class=06-04-00, hdrtype=0x01, mfdev=1
>>>> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>>>> intpin=b, irq=11
>>>> powerspec 2 supports D0 D3 current D0
>>>> MSI supports 1 message, 64 bit, vector masks
>>>> pcib0: matched entry for 0.3.INTB
>>>> pcib0: slot 3 INTB hardwired to IRQ 39
>>>> found-> vendor=0x1106, dev=0x5324, revid=0x00
>>>> domain=0, bus=0, slot=15, func=0
>>>> class=01-01-8a, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
>>>> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> powerspec 2 supports D0 D3 current D0
>>>> map[20]: type I/O Port, range 32, base 0xfc00, size 4, enabled
>>>> found-> vendor=0x1106, dev=0x3038, revid=0xa0
>>>> domain=0, bus=0, slot=16, func=0
>>>> class=0c-03-00, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0007, statreg=0x0218, cachelnsz=16 (dwords)
>>>> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> intpin=a, irq=10
>>>> powerspec 2 supports D0 D1 D2 D3 current D0
>>>> map[20]: type I/O Port, range 32, base 0xf800, size 5, enabled
>>>> pcib0: matched entry for 0.16.INTA
>>>> pcib0: slot 16 INTA hardwired to IRQ 20
>>>> found-> vendor=0x1106, dev=0x3038, revid=0xa0
>>>> domain=0, bus=0, slot=16, func=1
>>>> class=0c-03-00, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
>>>> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> intpin=b, irq=11
>>>> powerspec 2 supports D0 D1 D2 D3 current D0
>>>> map[20]: type I/O Port, range 32, base 0xf400, size 5, enabled
>>>> pcib0: matched entry for 0.16.INTB
>>>> pcib0: slot 16 INTB hardwired to IRQ 22
>>>> found-> vendor=0x1106, dev=0x3038, revid=0xa0
>>>> domain=0, bus=0, slot=16, func=2
>>>> class=0c-03-00, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
>>>> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> intpin=c, irq=7
>>>> powerspec 2 supports D0 D1 D2 D3 current D0
>>>> map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled
>>>> pcib0: matched entry for 0.16.INTC
>>>> pcib0: slot 16 INTC hardwired to IRQ 21
>>>> found-> vendor=0x1106, dev=0x3104, revid=0x90
>>>> domain=0, bus=0, slot=16, func=4
>>>> class=0c-03-20, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
>>>> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> intpin=d, irq=5
>>>> powerspec 2 supports D0 D1 D2 D3 current D0
>>>> map[10]: type Memory, range 32, base 0xdffff000, size 8, enabled
>>>> pcib0: matched entry for 0.16.INTD
>>>> pcib0: slot 16 INTD hardwired to IRQ 23
>>>> found-> vendor=0x1106, dev=0x8353, revid=0x00
>>>> domain=0, bus=0, slot=17, func=0
>>>> class=06-01-00, hdrtype=0x00, mfdev=1
>>>> cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> powerspec 2 supports D0 D3 current D0
>>>> found-> vendor=0x1106, dev=0xa353, revid=0x00
>>>> domain=0, bus=0, slot=17, func=7
>>>> class=06-00-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0000, statreg=0x2200, cachelnsz=0 (dwords)
>>>> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0xb353, revid=0x00
>>>> domain=0, bus=0, slot=19, func=0
>>>> class=06-04-00, hdrtype=0x01, mfdev=0
>>>> cmdreg=0x0007, statreg=0x2010, cachelnsz=0 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>>>> found-> vendor=0x1106, dev=0x3288, revid=0x10
>>>> domain=0, bus=0, slot=20, func=0
>>>> class=04-03-00, hdrtype=0x00, mfdev=0
>>>> cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
>>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>>> intpin=a, irq=10
>>>> powerspec 2 supports D0 D3 current D0
>>>> MSI supports 1 message, 64 bit
>>>> map[10]: type Memory, range 64, base 0xdfff8000, size 14, enabled
>>>> pcib0: matched entry for 0.20.INTA
>>>> pcib0: slot 20 INTA hardwired to IRQ 17
>>>> NMI ISA 3c, EISA 0
>>>> NMI ... going to debugger
>>>> [thread pid 0 tid 100000 ]
>>>> Stopped at 0xc060098f = vsscanf+0x98f: movl %edx,0xfffffe8c(%ebp)
>>>> db> ps
>>>> pid ppid pgrp uid state wmesg wchan cmd
>>>> 5 0 0 0 RL [xpt_thrd]
>>>> 4 0 0 0 RL [g_down]
>>>> 3 0 0 0 RL [g_up]
>>>> 2 0 0 0 RL [g_event]
>>>> 12 0 0 0 WL (threaded) intr
>>>> 100021 I [irq9: acpi0]
>>>> 100016 I [swi2: cambio]
>>>> 100014 I [swi6: task queue]
>>>> 100013 I [swi6: Giant taskq]
>>>> 100011 I [swi5: +]
>>>> 100006 I [swi1: netisr 0]
>>>> 100005 I [swi4: clock]
>>>> 100004 I [swi3: vm]
>>>> 11 0 0 0 RL [idle: cpu0]
>>>> 1 0 0 0 ?L [kernel]
>>>> 10 0 0 0 RL [audit]
>>>> 0 0 0 0 RLs (threaded) kernel
>>>> 100020 RunQ [acpi_task_2]
>>>> 100019 RunQ [acpi_task_1]
>>>> 100018 RunQ [acpi_task_0]
>>>> 100017 RunQ [kqueue taskq]
>>>> 100012 RunQ [thread taskq]
>>>> 100010 RunQ [firmware taskq]
>>>> 100000 Run CPU 0 [swapper]
>>>> db> where
>>>> Tracing pid 0 tid 100000 td 0xc0934590
>>>> vsscanf(c6ce5440,c089c6a3,c0c207b0,c0c207b0,c0c208c4,...) at 0xc060098f = vsscanf+0x98f
>>>> sscanf(c6ce5440,c089c6a3,c0c20894,c0c207f0,c0c20874,...) at 0xc0600a22 = sscanf+0x22
>>>> res_find(c0c20940,c089252b,0,0,0,...) at 0xc05f7ba9 = res_find+0x319
>>>> resource_find(c0c20940,c089252b,0,0,0,...) at 0xc05f7eda = resource_find+0x5a
>>>> resource_string_value(c6d117b0,2,c089252b,c0c20964,ffffffff,...) at 0xc05f8041 = resource_string_value+0x61
>>>> devclass_add_device(101,c6d0acc0,c6dffb80,c0c209c0,c05f3e6b,...) at 0xc05f071e = devclass_add_device+0x16e
>>>> device_set_devclass(c6dffb80,c08852dc,c089d6c5,c6dffbbc,c6dffbbc,...) at 0xc05f16af = device_set_devclass+0x6f
>>>> device_probe_child(c6dff780,c6dffb80,0,c6d11780,c6dffb80,...) at 0xc05f3e6b = device_probe_child+0xfb
>>>> device_probe(c6dffb80,c0c20a1c,c048ebcc,c091efd4,c6dffb80,...) at 0xc05f4160 = device_probe+0xa0
>>>> device_probe_and_attach(c6dffb80,c6dff780,0,c6df3080,c6df3080,...) at 0xc05f4238 = device_probe_and_attach+0x48
>>>> bus_generic_attach(c6dff780,c6dd86c0,1,c04b21a0,c6dff780,0,c6dd86c0) at 0xc05f42a8 = bus_generic_attach+0x48
>>>> acpi_pci_attach(c6dff780,c6dba05c,c08e9428,c089bed4,80000000,...) at 0xc04b275c = acpi_pci_attach+0x18c
>>>> device_attach(c6dff780,c6d10e88,c6d10e88,c6df3080) at 0xc05f34c7 = device_attach+0x3b7
>>>> device_probe_and_attach(c6dff780,c04b4680,c6d77000,c6df3080,c6d77000,...) at 0xc05f4255 = device_probe_and_attach+0x65
>>>> bus_generic_attach(c6df3080,c08c3e86,0,c0c20ae0,c6dd86c0,...) at 0xc05f42a8 = bus_generic_attach+0x48
>>>> acpi_pcib_attach(c6df3080,c6de82d4,0,c0c20b10,2,...) at 0xc04b4911 = acpi_pcib_attach+0x1a1
>>>> acpi_pcib_acpi_attach(c6df3080,c6d8a85c,c08e9428,c089bed4,80000000,...) at 0xc04b54a1 = acpi_pcib_acpi_attach+0x251
>>>> device_attach(c6df3080,c0c20b84,c05f8cd1,c6d19ca0) at 0xc05f34c7 = device_attach+0x3b7
>>>> device_probe_and_attach(c6df3080,c08e9418,fffeffff,c6dd1900,fffeffff,...) at 0xc05f4255 = device_probe_and_attach+0x65
>>>> bus_generic_attach(c6d77000,fff80000,fffeffff,c6deb468,fff80000,...) at 0xc05f42a8 = bus_generic_attach+0x48
>>>> acpi_attach(c6d77000,c6d8385c,c08e9428,c089bed4,80000000,...) at 0xc04aa1ae = acpi_attach+0xbbe
>>>> device_attach(c6d77000,c6ce4c50,0,c6d77500) at 0xc05f34c7 = device_attach+0x3b7
>>>> device_probe_and_attach(c6d77000,c087ebd2,0,c6d77500,c6d77500,...) at 0xc05f4255 = device_probe_and_attach+0x65
>>>> bus_generic_attach(c6d77500,a,c087ebd2,0) at 0xc05f42a8 = bus_generic_attach+0x48
>>>> nexus_acpi_attach(c6d77500,c6da785c,c08e9428,c089bed4,80000000,...) at 0xc081caae = nexus_acpi_attach+0x7e
>>>> device_attach(c6d77500,c089df99,184,20000) at 0xc05f34c7 = device_attach+0x3b7
>>>> device_probe_and_attach(c6d77500,c6d77c80,c6d77c80,c6d19100,c6d77c80,...) at 0xc05f4255 = device_probe_and_attach+0x65
>>>> bus_generic_new_pass(c6d77c80,c6d79000,c08e9368,c08cf034,fffffff,...) at 0xc05f449d = bus_generic_new_pass+0xcd
>>>> bus_set_pass(7fffffff,c0c20d6c,c081efdc,fffffff,c0c20d88,...) at 0xc05f2341 = bus_set_pass+0x81
>>>> root_bus_configure(fffffff,c0c20d88,c05839d6,0,c1ec00,...) at 0xc05f2392 = root_bus_configure+0x12
>>>> configure(0,c1ec00,c1ec00,c1e000,c25000,...) at 0xc081efdc = configure+0xc
>>>> mi_startup() at 0xc05839d6 = mi_startup+0xa6
>>>> begin() at 0xc0453005 = begin+0x2c
>>>> db>
>>>> _______________________________________________
>>>> freebsd-current at freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>>>> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>>
>> --
>>
>> Arno J. Klaassen
>>
>> SCITO S.A.
>> 8 rue des Haies
>> F-75020 Paris, France
>> http://scito.com
>> _______________________________________________
>> freebsd-current at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>>
--
Arno J. Klaassen
SCITO S.A.
8 rue des Haies
F-75020 Paris, France
http://scito.com
More information about the freebsd-current
mailing list