Unable to boot on ECS K7S5A
Michael Moll
kvedulv at kvedulv.de
Sun Nov 16 09:00:47 PST 2008
Hello,
after upgrading to new -CURRENT sources, my box (ECS K7S5A board) is not
able to boot. I attached verbose boot-messages (dmesg.new) and for
reference the boot-messages of the older, working kernel (dmesg.old).
As one of messages is "atapci0: unable to map interrupt" I suspect some
trouble in ATA oder ACPI code... Any hints?
Best Regards
--
Michael Moll
e-mail : kvedulv at kvedulv.de
WWW : http://www.kvedulv.de/
GSM : +49 175 606 7861
-------------- next part --------------
OK boot -v
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000003fef0000
SMAP type=03 base=000000003fff0000 len=0000000000008000
SMAP type=04 base=000000003fff8000 len=0000000000008000
SMAP type=02 base=00000000ffee0000 len=0000000000020000
SMAP type=02 base=00000000fec00000 len=0000000000001000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fffc0000 len=0000000000040000
SMAP type=02 base=00000000000ec000 len=0000000000004000
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Sun Nov 16 16:25:48 CET 2008
root at trinity.kvedulv.de:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc100b000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1991534087 Hz
CPU: AMD Athlon(tm) XP 2400+ (1991.53-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001425000 - 0x000000003eea4fff, 1034420224 bytes (252544 pages)
avail memory = 1033105408 (985 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fdad0
bios32: Entry = 0xfdae0 (c00fdae0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb01
pnpbios: Found PnP BIOS data at 0xc00f7270
pnpbios: Entry = f0000:5d07 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.10.5.10 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Nov 16 2008 16:25:21)
ACPI: RSDP @ 0x0xfa290/0x0014 (v 0 AMI )
ACPI: RSDT @ 0x0x3fff0000/0x0028 (v 1 AMIINT SiS735XX 0x00001000 MSFT 0x0100000B)
ACPI: FACP @ 0x0x3fff0030/0x0074 (v 1 AMIINT SiS735XX 0x00001000 MSFT 0x0100000B)
ACPI: DSDT @ 0x0x3fff0100/0x33D3 (v 1 SiS 735 0x00000100 MSFT 0x0100000D)
ACPI: FACS @ 0x0x3fff8000/0x0040
npx0: INT 16 interface
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc41b6000 pa 0x1000
atpic: Programming IRQ9 as level/low
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001044
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=07351039)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \_SB_.PCI0.TMEM -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.PA2D -> bus 0 dev 2 func 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.PE2H -> bus 0 dev 2 func 0
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 11
Validation 0 11 N 0 11
After Disable 0 255 N 0 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 11
Validation 0 11 N 0 11
After Disable 0 255 N 0 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 7 10 12 14 15
Validation 0 3 N 0 3 4 5 7 10 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 10 12 14 15
Validation 0 5 N 0 3 4 5 7 10 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 12 14 15
Validation 0 255 N 0 3 4 5 7 10 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 12 14 15
Validation 0 255 N 0 3 4 5 7 10 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 5 7 10 12 14 15
Validation 0 12 N 0 3 4 5 7 10 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 7 10 12 14 15
Validation 0 10 N 0 3 4 5 7 10 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.2.INTA at func 3: 10
ACPI: Found matching pin for 0.2.INTD at func 2: 5
ACPI: Found matching pin for 0.3.INTA at func 0: 12
ACPI: Found matching pin for 0.17.INTA at func 0: 11
ACPI: Found matching pin for 0.19.INTA at func 0: 11
ACPI: Found matching pin for 0.19.INTB at func 1: 11
ACPI: Found matching pin for 0.19.INTC at func 2: 3
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1039, dev=0x0735, revid=0x01
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0xd0000000, size 22, enabled
found-> vendor=0x1039, dev=0x0001, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x00
domain=0, bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x7001, revid=0x07
domain=0, bus=0, slot=2, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=5
map[10]: type Memory, range 32, base 0xcfffe000, size 12, enabled
pcib0: matched entry for 0.2.INTD (src \_SB_.LNKD:0)
pcib0: slot 2 INTD routed to irq 5 via \_SB_.LNKD
found-> vendor=0x1039, dev=0x7001, revid=0x07
domain=0, bus=0, slot=2, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xcffff000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \_SB_.LNKH:0)
pcib0: slot 2 INTA routed to irq 10 via \_SB_.LNKH
found-> vendor=0x1039, dev=0x5513, revid=0xd0
domain=0, bus=0, slot=2, func=5
class=01-01-80, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled
found-> vendor=0x1039, dev=0x0900, revid=0x90
domain=0, bus=0, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xdc00, size 8, enabled
map[14]: type Memory, range 32, base 0xcfffc000, size 12, enabled
pcib0: matched entry for 0.3.INTA (src \_SB_.LNKG:0)
pcib0: slot 3 INTA routed to irq 12 via \_SB_.LNKG
found-> vendor=0x8086, dev=0x107c, revid=0x05
domain=0, bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xcfe60000, size 17, enabled
map[14]: type Memory, range 32, base 0xcfe40000, size 17, enabled
map[18]: type I/O Port, range 32, base 0xd800, size 6, enabled
pcib0: matched entry for 0.17.INTA (src \_SB_.LNKB:0)
pcib0: slot 17 INTA routed to irq 11 via \_SB_.LNKB
found-> vendor=0x1106, dev=0x3038, revid=0x50
domain=0, bus=0, slot=19, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled
pcib0: matched entry for 0.19.INTA (src \_SB_.LNKA:0)
pcib0: slot 19 INTA routed to irq 11 via \_SB_.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x50
domain=0, bus=0, slot=19, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
pcib0: matched entry for 0.19.INTB (src \_SB_.LNKB:0)
pcib0: slot 19 INTB routed to irq 11 via \_SB_.LNKB
found-> vendor=0x1106, dev=0x3104, revid=0x51
domain=0, bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xcfffdf00, size 8, enabled
pcib0: matched entry for 0.19.INTC (src \_SB_.LNKC:0)
pcib0: slot 19 INTC routed to irq 3 via \_SB_.LNKC
atapci0: unable to map interrupt
device_attach: atapci0 attach returned 6
atapci1: <SiS 735 UDMA100 controller> at device 1.0 on pci0
pci0: child atapci1 requested type 4 for rid 0x20, but the BAR says it is an memio
atapci1: unable to map interrupt
device_attach: atapci1 attach returned 6
atapci2: <SiS 735 UDMA100 controller> at device 2.0 on pci0
ata0: <ATA channel 0> on atapci2
device_attach: ata0 attach returned 6
ata1: <ATA channel 1> on atapci2
device_attach: ata1 attach returned 6
atapci3: <SiS 735 UDMA100 controller> mem 0xcfffe000-0xcfffefff irq 5 at device 2.2 on pci0
atapci3: [MPSAFE]
atapci3: [ITHREAD]
ata2: <ATA channel 0> on atapci3
pci0: child atapci3 requested type 4 for rid 0x10, but the BAR says it is an memio
device_attach: ata2 attach returned 6
atapci4: <SiS 735 UDMA100 controller> mem 0xcffff000-0xcfffffff irq 10 at device 2.3 on pci0
atapci4: [MPSAFE]
atapci4: [ITHREAD]
ata3: <ATA channel 0> on atapci4
pci0: child atapci4 requested type 4 for rid 0x10, but the BAR says it is an memio
device_attach: ata3 attach returned 6
atapci5: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
atapci5: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atapci6: <SiS 735 UDMA100 controller> port 0xdc00-0xdcff mem 0xcfffc000-0xcfffcfff irq 12 at device 3.0 on pci0
atapci6: [MPSAFE]
atapci6: [ITHREAD]
ata4: <ATA channel 0> on atapci6
atapci6: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
pci0: child atapci6 requested type 4 for rid 0x14, but the BAR says it is an memio
device_attach: ata4 attach returned 6
em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0xd800-0xd83f mem 0xcfe60000-0xcfe7ffff,0xcfe40000-0xcfe5ffff irq 11 at device 17.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xcfe60000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xd800
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:c5:f2:bb
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device 19.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 19.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xcfffdf00-0xcfffdfff irq 3 at device 19.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xcfffdf00
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 0.95
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1991534087 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ATA PseudoRAID loaded
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad0s3a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
More information about the freebsd-current
mailing list