usb2: no sound with M-Audio Transit

[Stefan Ehmann]

On Saturday 15 November 2008 10:22:55 Hans Petter Selasky wrote:
> On Saturday 15 November 2008, Stefan Ehmann wrote:
> > On Friday 14 November 2008 18:11:23 Hans Petter Selasky wrote:
> > > On Friday 14 November 2008, Stefan Ehmann wrote:
> > > > http://stud4.tuwien.ac.at/~e0125637/fbsd/transit_config.dump
> > >
> > > Maybe there is something wrong with the 16-bit to 24-bit data
> > > conversion ?
> >
> > One more thing:
> >
> > I'm using dfu-util for the firmware download. See
> > http://svn.openmoko.org/trunk/src/host/dfu-util/

> > The reset in dfu-util fails, possibly due to preceding errors.
>
> Hi,
>
> The problem is that the device changes its configuration descriptor and the
> reset implementation assumes that the configuration descriptor is the same
> after the reset. I will see if I can make a patch for this. I have the same
> problem when flashing the openmoko.
>
> I will make a patch for this by tomorrow.

Great. Thanks again for your quick replies!