CFT: vr(4)
Stefan Ehmann
shoesoft at gmx.net
Fri Feb 15 14:09:42 UTC 2008
On Monday 11 February 2008 06:36:32 Pyun YongHyeon wrote:
> On Tue, Feb 05, 2008 at 11:17:15AM +0100, Stefan Ehmann wrote:
> > On Monday 04 February 2008 20:56:54 Stefan Ehmann wrote:
> > > On Monday 04 February 2008 18:47:44 Marcin Wisnicki wrote:
> > > > On Mon, 04 Feb 2008 10:48:02 -0500, Mike Tancsa wrote:
> > > > > At 09:23 PM 2/3/2008, Pyun YongHyeon wrote:
> > > > >>Dear all,
> > > > >>
> > > > >>Here is overhauled vr(4) that shall address all known issues. PR
> > > > >>database showed vr(4) is not stable enough under high load and
> > > > >
> > > > > Hi,
> > > > > Is there a RELENG_7 or 6 version of the driver to test ?
> > > > > Using RELENG_7 from this morning, I get
> > > >
> > > > Try this:
> > > >
> > > > http://wisnia21.freeshell.org/f/freebsd/if_vr-pyunyh-to-releng6.diff
> > > >
> > > > On RELENG7 there could be a conflict in second change that should be
> > > > safe to ignore.
> > >
> > > Using it with the second chunk ignored.
> >
> > ...
> >
> > > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa000-0xa0ff mem
> > > 0xf0000000-0xf00000ff at device 18.0 on pci0
> > > vr0: Quirks: 0x0
> > > vr0: Revision: 0x74
> > > miibus0: <MII bus> on vr0
> > > vr0: Ethernet address: 00:0e:a6:40:3f:d0
> > > vr0: [ITHREAD]
> >
> > (replying to myself)
> > wake-on-LAN doesn't work for me any longer.
>
> Show me the output of 'ifconfig vr0'.
$ ifconfig vr0
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:0e:a6:40:3f:d0
inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
--
Stefan
More information about the freebsd-current
mailing list