CFT: Texas Instruments ACX100/111 IEEE 802.11 driver.

[Robert Noland]

On Sat, 2008-12-27 at 18:18 +0100, Alexey Shuvaev wrote:
> Hello list!
> 
> As it is device driver, I think this list is more appropriate rather than
> ports at .
> 
> I've just updated net/acx100 port:
> http://www.freebsd.org/cgi/query-pr.cgi?pr=129977
> but I have no actual hardware :(
> 
> Have someone one of:
> 
> Card                    Bus             Type
> Binatone WL-1000        CARDBUS         ACX100
> D-Link DWL-650+         CARDBUS         ACX100
> US Robotics USR2210     CARDBUS         ACX100
> US Robotics USR2216     PCI             ACX100
> D-Link DWL-G650+        CARDBUS         ACX111
> D-Link DWL-G520+        PCI             ACX111
> US Robotics USR5416     PCI             ACX111
> SAFECOM SWLPT-54125     PCI             ACX111
> 
> and could give it a try (with a new port from the PR)?
> Is it a rare hardware? Any interest in maintaining it?
> Any ongoing support in the base?

I have a linksys wpc54g v2 card which is a 111 part.  The updated port
does not autoload the firmware, but if I manually load the firmware,
then it attaches.  It doesn't quite work though.

acx111fw: registering firmware
cardbus0: Expecting link target, got 0xf2
cardbus0: Expecting link target, got 0xf2
acx0: <Texas Instruments (TI) 802.11b+/g 54Mbps Wireless Adapter> mem
0xfe620000-0xfe63ffff,0xfe602000-0xfe603fff irq 19 at device 0.0 on
cardbus0
acx0: Radio type: 16
acx0: Firmware revision: 1.2.1.34
acx0: Regulatory domain: FCC USA (1-11)
acx0: WARNING: using obsoleted if_watchdog interface
acx0: Ethernet address: 00:0f:66:c6:d7:f2
acx0: [GIANT-LOCKED]
acx0: [ITHREAD]

acx0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:0f:66:c6:d7:f2
        media: IEEE 802.11 Wireless Ethernet autoselect
        status: no carrier
ifconfig: unable to get HT configuration information: Invalid argument
ifconfig: unknown/undefined channel number 255 flags 0x0
        ssid
""%                                                                

robert.

> Thanks,
> Alexey.
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 195 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20081227/ac3aed44/attachment.pgp