HEADSUP usb2 (usb4bsd) to become default in 2 weeks.

[Pegasus Mc Cleaft]

On Tuesday 23 December 2008 10:56:10 Pegasus Mc Cleaft wrote:
> ----- Original Message -----
> From: "Hans Petter Selasky" <hselasky at c2i.net>
> To: <remko at elvandar.org>
> Cc: <freebsd-current at freebsd.org>; "Pegasus Mc Cleaft" <ken at mthelicon.com>
> Sent: Tuesday, December 23, 2008 10:30 AM
> Subject: Re: HEADSUP usb2 (usb4bsd) to become default in 2 weeks.
>
> > On Tuesday 23 December 2008, Remko Lodder wrote:
> >> On Tue, December 23, 2008 11:03 am, Hans Petter Selasky wrote:
> >> > On Tuesday 23 December 2008, Pegasus Mc Cleaft wrote:
> >> >> I believe that the Prolific USB serial adapter is broken on AMD64.  I
> >> >> tried
> >> >> one of the adapters on my machine and no matter what serial speed I
> >> >> was
> >> >> selecting with cu it would come back with an error stating the speed
> >> >> was
> >> >> unsupported. I moved the adapter to a 8-current machine (i386) with
> >> >> the
> >> >> usb1 stack and everything worked fine.
> >> >>
> >> >> Peg
> >> >
> >> > Are you sure that this is not an mpsafetty problem?
> >>
> >> Given that he states that it works under the original USB stack, I would
> >> guess that it's not an MPsafeTTY thingy else it wouldn't work under the
> >> original stack either.
> >
> > Try to turn on USB debugging for:
> >
> > sysctl hw.usb2.ucom.debug=15
> > sysctl hw.usb2.uftdi.debug=15
> >
> > Have a look in "/usr/src/sys/dev/usb2/serial/uftdi2.c" and the function:
> >
> > uftdi_8u232am_getrate().
> >
> > Extra checks have been added to detect invalid line speeds between USB1
> > and
> > USB2.
> >
> > What rate are you trying to set?
> >
> > Minimum and maximum rate is defined like this:
> >
> >        if ((speed < 178) || (speed > ((3000000 * 100) / 97)))
> >                return (1);             /* prevent numerical overflow */
> >
> > --HPS
> >
> > uftdi_8u232am_getrate
>
> Hi Hans,
>
>     I was trying something like:  cu -l /dev/cuaU0 -s 9600
>
>     I did also try the same with /dev/ttyU0, both with various speeds from
> 300 to 115200.
>
>     Interestingly, I also tried doing a cat /dev/random > /dev/cuaU0 and
> that didnt throw an error (Dont know if it actually sent anything as I
> didnt have a scope hooked to the line). Like I said in another email, I
> will try moving the machines around between the USB1 and 2 stack tongiht
> and see if I can pin it down to a specific combination (MP vrs non-MP,
> AMD64 vrs i386)
>

Hi everyone, 
	I havent tried this on the i386 box yet (as it takes a few hours to compile 
the world and kernel) but I did some more testing on the AMD64 box. 

	What I have found is:

	AMD64 USB2 on prolific adapter:  BAD
	AMD64 USB1 on prolific adapter: GOOD
	AMD64 USB2 on FTDI adapter: GOOD

	I have included a few text files of the dmesg USB section for debugging with 
the prolific adapter.

	Anything I can do to help, please let me know.. 

Peg


-------------- next part --------------
 
feathers# cu -l /dev/cuaU0 -s 9600
Connected
fffffffffffffffff|||||þ||||\\\Çýÿý¾ý}¿½½ïÇïçïï­çîïïïçïç;çïöç5÷nn;ûn?·;»n;û?¹?Û»ù»ûÛÛÚÛ»ùÛÛ[[ÃÛO{o¿oé÷ýo¿oiooí/oíýý××ÿ·÷×÷íïõ]·ëé÷_××]×ý×]×]××ý××]½ë×]]]×ß×]]×]]]Ý»í·××]]]×ÿ|||||||||||||||||||||||||||||||||!!!!!!!!!!!!!!!~~~~~~~~~~~~~~~~~~
[EOT]
feathers#
-------------- next part --------------
feathers# cu -l /dev/cuaU0 -s 9600
cu: unsupported speed 9600
feathers#


ugen5.2: <Prolific Technology Inc.> at usbus5
uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 2> on usbus5
usb2_com_attach_sub:317: tp = 0xffffff000864f000, unit = 0
usb2_com_attach_sub:336: ttycreate: U0
usb2_com_open:532: tp = 0xffffff000864f000
usb2_com_dtr:757: onoff = 1
usb2_com_rts:786: onoff = 1
usb2_com_break:728: onoff = 0
usb2_com_status_change:846:
usb2_com_param:895: sc = 0xffffff005e146a78
usb2_com_dtr:757: onoff = 1
usb2_com_rts:786: onoff = 1
usb2_com_cfg_open:498:
usb2_com_cfg_dtr:742: onoff=1
usb2_com_ioctl:627: cmd = 0x402c7413
usb2_com_ioctl:627: cmd = 0x802c7416
usb2_com_ioctl:627: cmd = 0x2000740d
usb2_com_cfg_rts:768: onoff=1
usb2_com_ioctl:627: cmd = 0x402c7413
usb2_com_ioctl:627: cmd = 0x2000740e
usb2_com_close:594: tp=0xffffff000864f000
usb2_com_shutdown:412:
usb2_com_dtr:757: onoff = 0
usb2_com_rts:786: onoff = 1
usb2_com_cfg_break:713: onoff=0
usb2_com_cfg_dtr:742: onoff=1
usb2_com_cfg_dtr:742: onoff=0
usb2_com_cfg_rts:768: onoff=1
usb2_com_cfg_close:572:
 
-------------- next part --------------
 
Dec 23 23:59:27 feathers kernel: ugen5.2: <PEGASUS> at usbus5
Dec 23 23:59:27 feathers kernel: uftdi0: <Uni - Flicka USB -- Optical> on usbus5
^C
feathers#
feathers#
feathers#
feathers# cu -l /dev/cuaU0 -s 9600
Connected
~
[EOT]
feathers#
feathers#