yongari nfe problems
Mr. Darren
darren780 at yahoo.com
Sat Mar 10 06:21:46 UTC 2007
--- Pyun YongHyeon <pyunyh at gmail.com> wrote:
> On Fri, Mar 09, 2007 at 08:08:56PM +0900, To Mr.
> Darren wrote:
> > On Thu, Mar 08, 2007 at 04:33:36PM -0800, Mr.
> Darren wrote:
> > > I tried the following overhauled nfe drivers
> after no
> > > success in getting nfe to work with my
> hardware.
> > > >
> http://people.freebsd.org/~yongari/nfe/if_nfe.c
> > > > > > > > >
> > > >
> http://people.freebsd.org/~yongari/nfe/if_nfereg.h
> > > > > > > > >
> > > >
> http://people.freebsd.org/~yongari/nfe/if_nfevar.h
> > >
> > > It still doesn't work, but I have a new set of
> errors.
> > >
> > > nfe0: <NVIDIA nForce MCP55 Networking Adapter>
> port
> > > 0xb000-0xb007 mem
> > >
>
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f
> > > irq 10 at device 16.0 on pci0
> > > nfe0: Ethernet address: 00:15:f2:f4:af:5e
> > > miibus1: <MII bus> on nfe0
> > > nfe0: [ITHREAD]
> > > nfe1: <NVIDIA nForce MCP55 Networking Adapter>
> port
> > > 0xac00-0xac07 mem
> > >
>
0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f
> > > irq 11 at device 17.0 on pci0
> > > nfe1: Ethernet address: 00:15:f2:f4:af:5f
> > > miibus2: <MII bus> on nfe1
> > > nfe1: [ITHREAD]
> > > nfe0: link state changed to DOWN
> > > nfe0: link state changed to UP
> > > nfe0: watchdog timeout (missed Tx interrupts)
> --
> > > recovering
> > > nfe0: watchdog timeout (missed Tx interrupts)
> --
> > > recovering
> > >
> >
> > According to Shigeaki Tagashira'page nForce 590
> is supported by
> > nfe(4). ATM I have no idea why it shows watchdog
> timeout errors.
> > Btw, I don't see what PHY driver was attached in
> your message.
> > (You can check it with dmesg(8) and normally it
> would pick up
> > e1000phy(4).)
> >
>
> Oops, I think I've posted wrong version.
> Please re-fetch and try again.
>
> > >
> > > the missing tx interrupts were made while
> trying
> > > /sbin/dhclient nfe0
> > >
> > > My motherboard is the ASUS crosshair NVIDIA
> nForce 590
> > > FreeBSD DARREN 7.0-CURRENT FreeBSD 7.0-CURRENT
> #12:
> > > Thu Mar 8 16:57:38 UTC 2007
> > > root at DARREN:/usr/obj/usr/src/sys/DARREN amd64
> > > the cvsup this kernel was compiled with is
> less than 1
> > > week old.
> > >
> > > -Darren
> > --
> > Regards,
> > Pyun YongHyeon
>
> --
> Regards,
> Pyun YongHyeon
>
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on
miibus1
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseTX-FDX, auto
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on
miibus2
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseTX-FDX, auto
same problem with the new driver downloaded from
http://people.freebsd.org/~yongari/nfe/ . again,
while /sbin/dhclient nfe0 while in communication to my
router.
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: watchdog timeout (missed Tx interrupts) --
recovering
nfe0: watchdog timeout (missed Tx interrupts) --
recovering
nfe0: watchdog timeout (missed Tx interrupts) --
recovering
nfe0: watchdog timeout (missed Tx interrupts) --
recovering
nfe0: watchdog timeout (missed Tx interrupts) --
recovering
____________________________________________________________________________________
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http://tools.search.yahoo.com/shortcuts/#news
More information about the freebsd-current
mailing list