ATI on FreeBSD! FireGL Linux Driver Port (New Version)
Eric Anderson
anderson at centtech.com
Fri Jan 20 09:07:50 PST 2006
Chris Gilbert wrote:
> It's ready!
>
> The new version works both standalone as before, and from a FreeBSD port.
>
> This is my first time making a port, and I've double checked it and run
> portlint, but I have probably overlooked something!
>
> Please have a good look at it and tell me if I've done something stupid :)
>
> You can grab the port here:
>
> http://www.neovanglist.net/~Neovanglist/ATI/ati-driver.tar.gz
>
> It should be extracted to /usr/ports/x11
>
> It should fetch the distfile from my server... but in case you want to install
> it the old fashioned way, here is the link:
>
> http://www.neovanglist.net/~Neovanglist/ATI/FreeBSD-fglrx_6_8_0-8.20.8-2-ALPHA.i386.tar.bz2
>
> Changes since the last version:
> * It now installs the glATI.h file.
> * The panel was installing all kinds of strange things.. and not being very
> port friendly. It's still bad but it's much better now. (And accounted for in
> pkg-plist)
> * All of the Linux documentation and the README file is installed
> to /usr/X11R6/share/doc/fglrx
> * Working FreeBSD "port"! (As in for the ports system)
> * README file updated with some worthwhile content including a compatibility
> list.
>
> In regards to AMD64 support, this is an i386 build and I wouldn't expect it to
> work on AMD64 :)
>
> However, getting an AMD64 version going should be fairly trivial, but I do not
> have the hardware to test it.
>
> Tomorrow I can put together and AMD64 package and add support for it to the
> FreeBSD port. If you can test/verify that it works I would be thrilled!
I've just downloaded/built/installed using the port. Using the new
fglrx driver in my xorg.conf causes x not to start. I've attached the
Xorg.0.log and my xorg.conf file. (This is on a Dell D810 laptop, with
an X600, using xorg-server-snap).
Eric
--
------------------------------------------------------------------------
Eric Anderson Sr. Systems Administrator Centaur Technology
Anything that works is better than anything that doesn't.
------------------------------------------------------------------------
-------------- next part --------------
# Xorg configuration created by system-config-display
Section "ServerFlags"
Option "RandR" "on"
EndSection
Section "ServerLayout"
Identifier "Multihead layout"
Screen "Screen0" LeftOf "Screen1"
Screen "Screen1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AGPMode" "4"
Option "AGPFastWrite" "On"
Option "Xinerama" "on"
#Option "Clone" "on"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
#FontPath "unix/:7100"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/local/share/ghostscript/fonts/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
#FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/webfonts/"
FontPath "/usr/X11R6/lib/X11/fonts/artwiz-fonts"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
# Load "dri"
Load "xtrap"
Load "GLcore"
Load "bitmap"
Load "vnc"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
Option "Buttons" "9"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "synaptics"
Option "Device" "/dev/sysmouse"
Option "Protocol" "auto"
Option "LeftEdge" "1900"
Option "RightEdge" "5400"
Option "TopEdge" "1900"
Option "BottomEdge" "4000"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "220"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.38"
Option "AccelFactor" "0.0020"
Option "SHMConfig" "on"
Option "Emulate3Buttons" "yes"
Option "Buttons" "3"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel "
#HorizSync 31.5 - 90.0
#VertRefresh 59.0 - 75.0
Option "dpms"
#Displaysize 650 400
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "External "
#HorizSync 32 - 90
#VertRefresh 60 - 70
#HorizSync 30 - 81
VertRefresh 75
Option "dpms"
#Displaysize 520 330
#UseModes "19:12"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
#Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
VendorName "Videocard vendor"
BoardName "Radeon X300"
BusID "PCI:1:0:0"
#Option "DDCMode" "on"
Option "DPMS"
Option "passwordFile" "/home/anderson/.vnc/passwd"
#Option "MonitorLayout" "LVDS,CRT"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "radeon"
#Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
VendorName "Videocard vendor"
BoardName "Radeon X300"
BusID "PCI:1:0:0"
#Option "DDCMode" "on"
Option "DPMS"
Option "passwordFile" "/home/anderson/.vnc/passwd"
#Option "MonitorLayout" "LVDS,CRT"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
#Viewport 0 0
Depth 24
#Virtual 1920 1200
Modes "1920x1200"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
#Viewport 0 0
Depth 24
#Virtual 1920 1200
Modes "1920x1200"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
#Section "Modes"
# Identifier "19:12"
# ModeLine "1920x1200" 154.0 1920 1968 2000 2080 1200 1203 1209 1235 +Hsync -Vsync
#EndSection
More information about the freebsd-current
mailing list