Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers.
Pyun YongHyeon
pyunyh at gmail.com
Wed Dec 13 00:13:04 PST 2006
On Wed, Dec 13, 2006 at 02:35:43AM -0500, Andre Guibert de Bruet wrote:
[...]
>
> Sorry for the late reply. This is the output, including your latest
> round of changes (As committed):
>
> dmesg:
>
> mskc0: <Marvell Yukon 88E8050 Gigabit Ethernet> port 0xd800-0xd8ff mem
> 0xfcffc000-0xfcffffff irq 16 at device 0.0 on pci6
> mskc0: [FAST]
> msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0
> msk0: Ethernet address: 00:04:23:b0:d2:cf
> miibus0: <MII bus> on msk0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
>
Hmm, it seems that e1000phy(4) failed to attach your PHY.
I'd like to know your PHY model/revision number.(You can set
bootverbose option and ukphy(4) will show OUI/model/revision
for your PHY.) With ukphy(4) you wouldn't get auto-crossover
feature or manual media selection work.
> ifconfig:
>
> msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> options=19a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
> inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
> ether 00:04:23:b0:d2:cf
> media: Ethernet autoselect (1000baseTX <full-duplex>)
> status: active
>
> pciconf -vl
>
> mskc0 at pci6:0:0: class=0x020000 card=0x50218086 chip=0x436111ab rev=0x17
> hdr=0x00
>
> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
> device = '88E8036 Marvell Yukon -EC 88E8036 PCI Express Fast Ethernet
> Controller'
> class = network
> subclass = ethernet
>
> Thanks again! :)
>
> Andy
>
> /* Andre Guibert de Bruet * 6f43 6564 7020 656f 2e74 4220 7469 6a20 */
> /* Code poet / Sysadmin * 636f 656b 2e79 5320 7379 6461 696d 2e6e */
> /* GSM: +1 734 846 8758 * 5520 494e 2058 6c73 7565 6874 002e 0000 */
> /* WWW: siliconlandmark.com * Tormenting bytes since 1980. */
>
--
Regards,
Pyun YongHyeon
More information about the freebsd-current
mailing list