ad0: Danger Will Robinson
Mike G
mike at v.gz.ru
Sat Oct 22 07:52:11 PDT 2005
Hello, Danny!
You wrote to "Mike G" <mike at v.gz.ru> on Sat, 22 Oct 2005 14:58:56 +0200:
??>> We have a problem with FreeBSD RELENG_6
??>> system has hang up 'cause of lot lof messages:
??>> ad0: req=0xXXXXXXX SETFEATURES SET TRANSFER MODE semaphore timeout !!
??>> DANGER Will Robinson !!
??>> ad0: req=0xXXXXXXX SETFEATURES SET TRANSFER MODE semaphore timeout !!
??>> DANGER Will Robinson !!
??>> ad0: req=0xXXXXXXX SETFEATURES SET TRANSFER MODE semaphore timeout !!
??>> DANGER Will Robinson !!
DB>
DB> i got similar messages with an Intel SE7501WV2, in my case
DB> it was caused because i was fiddling with the BIOS.
DB> can't remember exactly which option caused it, but
DB> check memory/pci, and the raid.
it's hard to do. 'cause it'a production box, serving many commercial users
:(
but i'll try check it up on next reboot.
DB>
DB> btw, is this a nocoma cpu?
yes, NOCONA 2.8GHz.
but FreeBSD compiled for 32x86 (not x64)
DB>
DB> danny
DB>
??>> Our system is
??>> MotherBoard: Intel SE7520BD2 with 1 Xeon (HyperThreading)
??>> HDD : ad0: 19092MB <Seagate ST320014A 3.07> at
??>> ata0-master UDMA100 for details see the full /var/run/dmesg.boot in
??>> namespace, AE_BAD_CHARACTER SearchNode 0xc2329d60 StartNode 0xc2329d60
??>> ReturnNode 0xc23271c0 ACPI-1304: *** Error: Method execution failed
??>> [\\_GPE.PXL1] (Node 0xc2329d60), AE _BAD_CHARACTER ioapic0 <Version
??>> 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on
??>> motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard npx0:
??>> [FAST] npx0: <math processor> on motherboard npx0: INT 16
??>> interface acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button
??>> (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link1:
??>> <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC>
??>> irq 15 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 7 on
??>> acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI
??>> PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on
??>> acpi0 pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0 Timecounter
??>> "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit
??>> timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on
??>> acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU>
??>> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 pcib0: <ACPI
??>> Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on
??>> pcib0 pci0: <unknown> at device 0.1 (no driver attached) pci0: <base
??>> peripheral> at device 1.0 (no driver attached) pcib1: <ACPI PCI-PCI
??>> bridge> irq 16 at device 2.0 on pci0 pci1: <ACPI PCI bus> on
??>> pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI
??>> PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version
??>> - 2.1.7> port 0xcc80-0xccbf mem
??>> 0 xfcee0000-0xfcefffff,0xfcec0000-0xfcedffff irq 28 at device 2.0 on
??>> pci2 em0: [GIANT-LOCKED] em0: Ethernet address: 00:07:e9:14:6a:18 em0:
??>> Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection,
??>> Version - 2.1.7> port 0xcc00-0xcc3f mem
??>> 0 xfce80000-0xfce9ffff,0xfce60000-0xfce7ffff irq 24 at device 3.0 on
??>> pci2 em1: [GIANT-LOCKED] em1: Ethernet address: 00:07:e9:14:6e:9d em1:
??>> Speed:N/A Duplex:N/A pci1: <base peripheral, interrupt controller> at
??>> device 0.1 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device
??>> 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 pci1: <base peripheral,
??>> interrupt controller> at device 0.3 (no driver attached) pcib4: <ACPI
??>> PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci4: <ACPI PCI bus> on
??>> pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0 pci5:
??>> <ACPI PCI bus> on pcib5 pci5: <network, ethernet> at device 0.0 (no
??>> driver attached) pcib6: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on
??>> pci0 pci6: <ACPI PCI bus> on pcib6 pci0: <serial bus, USB> at device
??>> 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no
??>> driver attached) pci0: <serial bus, USB> at device 29.2 (no driver
??>> attached) pci0: <serial bus, USB> at device 29.7 (no driver attached)
??>> pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI
??>> bus> on pcib7 em2: <Intel(R) PRO/1000 Network Connection, Version -
??>> 2.1.7> port 0xec80-0xecbf mem 0 xfebe0000-0xfebfffff irq 16 at device
??>> 4.0 on pci7 em2: [GIANT-LOCKED] em2: Ethernet address:
??>> 00:04:23:b0:16:58 em2: Speed:N/A Duplex:N/A pci7: <display, VGA> at
??>> device 12.0 (no driver attached) isab0: <PCI-ISA bridge> at device
??>> 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100
??>> controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf c00-0xfc0f at
??>> device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA
??>> channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no
??>> driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1:
??>> <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port
??>> 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0
??>> at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port>
??>> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1:
??>> <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1:
??>> type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at
??>> iomem 0xc0000-0xca7ff,0xca800-0xcbfff,0xcc000-0xcd7ff on i sa0 sc0:
??>> <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles,
??>> flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
??>> 0xa0000-0xbffff on isa0 Timecounters tick every 1.333 msec ipfw2
??>> (+ipv6) initialized, divert loadable, rule-based forwarding
??>> enabled, default to accept, logging limited to 10000 packets/entry by
??>> default ad0: 19092MB <Seagate ST320014A 3.07> at ata0-master
??>> UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from
??>> ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /var
??>> was not properly dismounted /var: mount pending error: blocks 564
??>> files 11 WARNING: /usr was not properly dismounted WARNING: /usr/local
??>> was not properly dismounted -- Mike G : mike at v.gz.ru Moscow State
??>> University. ______________________________ freebsd-current at freebsd.org
??>> mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current
??>> To unsubscribe, send any mail to
??>> "freebsd-current-unsubscribe at freebsd.org"
DB>
With best regards, Mike G. E-mail: mike at v.gz.ru
More information about the freebsd-current
mailing list