Intel ICH6-M failure
jicken at web.de
jicken at web.de
Sat Oct 22 03:14:36 PDT 2005
hi,
searched quite a few days for a solution and tested different freebsd versions, but still no success.
atapci0 at pci0:31:2: class=0x010180 card=0x01871028 chip=0x26538086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM ICH6M SATA Controller'
class = mass storage
subclass = ATA
5.4-RELEASE boots without problems while the controller is detected as the following:
atapci0: <GENERIC ATA controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 17 at device
31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
...
ad0: 57231MB <HTS726060M9AT00/MH4OA6EA> [116280/16/63] at ata0-master UDMA33
if testing with anything else (5.4-STABLE, 6.0-BETA5, 6.0-RC1, CURRENT) the controller is detected as
<INTEL ICH6 SATA150 controller>.
when mounting the root fs the following error occurs:
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0
found some other threads regarding this failure but upgrading to another version didn't help.
disabling acpi or apic also doesn't have any effect.
disabling dma, using pio4 didn't work.
i want to get 6.0 running to be able to use wpa functionality.
any advice?
if this is not enough information just give me a hint.
thx.
torben
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20051022/2ce8ed50/attachment.bin
More information about the freebsd-current
mailing list