reboot hangs at Uptime:
Sten Spans
sten at blinkenlights.nl
Sun May 29 15:57:18 PDT 2005
On Sun, 29 May 2005, Richard Tector wrote:
> Quoting Sten Spans <sten at blinkenlights.nl>:
>
>> On Sun, 29 May 2005, Richard Tector wrote:
>>>
>>> I've had a similar problem for a while on a dual P3 Gateway branded Asus
>>> CUR-DLS motherboard but never really looked into it much. At the time I
>>> tried both with and without the ACPI module loaded; reboots are not
>>> possible. The machine hangs just after printing something like cpu0:
>>> reset()
>>> A basic shutdown -p now works fine and powers the machine off. Issuing
>>> reboot/shutdown -r now however results in the above behaviour. The system
>>> has tracked HEAD for a few months and the problem has existed as long as I
>>> can remember.
>>>
>>> The machine is currently running the latest BIOS released by Gateway. I
>>> didn't fancy trying the newer BIOS's from Asus. I've attached a copy of
>>> the boot dmesg. If there's any other information that might be of help I
>>> can supply that.
>>
>> Try turning on usb in the bios (even if you don't have usb in the kernel),
>> this solved my reboot issues with supermicro serverworks p3 motherboards.
>>
>
> Wow, that solved it, thanks. How very odd, I don't think I'd have ever
> thought
> of that one.
> Have you encountered similar reboot issues while running any other operating
> system, or just FreeBSD?
Only freebsd. I've looked at the code, but I couldn't figure out
how usb could affect it. Bios writers have mystical ways
feng-shui most commonly.
--
Sten Spans
"There is a crack in everything, that's how the light gets in."
Leonard Cohen - Anthem
More information about the freebsd-current
mailing list