FreeBSD 5.4 supports DELL PERC 4 cards
Muthu_T at Dell.com
Muthu_T at Dell.com
Wed May 25 05:21:59 PDT 2005
All,
Could anyone add the following cards to the 'amr' man page as
supported hardware?
1. DELL PERC 4/SC - PCI Card
2. DELL PERC 4/DC - PCI Card
3. DELL PERC 4e/DC - PCI Express card
I had installed FreeBSD 5.4 on PE2850 today and found that 'amr'
detected the above last 2 cards.
See the attached dmesg & 'pciconf -l -v' output.
Also please change the text 'MegaRaid' to 'MegaRAID' in 'amr' source.
Thanks.
--T. Muthu Mohan
-------------- next part --------------
hostb0 at pci0:0:0: class=0x060000 card=0x016d1028 chip=0x35908086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Server Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory controller Hub PCI Express Port A0'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory controller Hub PCI Express Port B0'
class = bridge
subclass = PCI-PCI
pcib5 at pci0:5:0: class=0x060400 card=0x00000050 chip=0x35988086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port B1'
class = bridge
subclass = PCI-PCI
pcib8 at pci0:6:0: class=0x060400 card=0x00000050 chip=0x35998086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port C0'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x016d1028 chip=0x24d28086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x016d1028 chip=0x24d48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x016d1028 chip=0x24d78086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'
class = serial bus
subclass = USB
none0 at pci0:29:7: class=0x0c0320 card=0x016d1028 chip=0x24dd8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB EHCI Controller'
class = serial bus
subclass = USB
pcib11 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER (ICH2/3/4/4-L/5/5R), 6300ESB Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci1 at pci0:31:1: class=0x01018a card=0x016d1028 chip=0x24db8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
class = mass storage
subclass = ATA
pcib2 at pci1:0:0: class=0x060400 card=0x00000044 chip=0x03308086 rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
device = '80332 [Dobson] I/O processor A-segment Bridge'
class = bridge
subclass = PCI-PCI
pcib3 at pci1:0:2: class=0x060400 card=0x00000044 chip=0x03328086 rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
device = '80332 [Dobson] I/O processor B-segment Bridge'
class = bridge
subclass = PCI-PCI
amr0 at pci2:14:0: class=0x010400 card=0x016d1028 chip=0x00131028 rev=0x06 hdr=0x00
vendor = 'Dell Computer Corporation'
class = mass storage
subclass = RAID
amr1 at pci3:11:0: class=0x010400 card=0x05201028 chip=0x19601000 rev=0x01 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
class = mass storage
subclass = RAID
pcib6 at pci5:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Bridge Hub A'
class = bridge
subclass = PCI-PCI
pcib7 at pci5:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Bridge Hub B'
class = bridge
subclass = PCI-PCI
em0 at pci6:7:0: class=0x020000 card=0x016d1028 chip=0x10768086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82547EI Gigabit Ethernet Controller'
class = network
subclass = ethernet
em1 at pci7:8:0: class=0x020000 card=0x016d1028 chip=0x10768086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82547EI Gigabit Ethernet Controller'
class = network
subclass = ethernet
pcib9 at pci8:0:0: class=0x060400 card=0x00000044 chip=0x03308086 rev=0x07 hdr=0x01
vendor = 'Intel Corporation'
device = '80332 [Dobson] I/O processor A-segment Bridge'
class = bridge
subclass = PCI-PCI
pcib10 at pci8:0:2: class=0x060400 card=0x00000044 chip=0x03328086 rev=0x07 hdr=0x01
vendor = 'Intel Corporation'
device = '80332 [Dobson] I/O processor B-segment Bridge'
class = bridge
subclass = PCI-PCI
amr2 at pci9:14:0: class=0x010400 card=0x00021028 chip=0x04081000 rev=0x07 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
class = mass storage
subclass = RAID
none1 at pci11:5:0: class=0xff0000 card=0x00111028 chip=0x00111028 rev=0x00 hdr=0x00
vendor = 'Dell Computer Corporation'
none2 at pci11:5:1: class=0xff0000 card=0x00121028 chip=0x00121028 rev=0x00 hdr=0x00
vendor = 'Dell Computer Corporation'
none3 at pci11:5:2: class=0xff0000 card=0x00141028 chip=0x00141028 rev=0x00 hdr=0x00
vendor = 'Dell Computer Corporation'
atapci0 at pci11:6:0: class=0x010185 card=0x06801095 chip=0x06801095 rev=0x02 hdr=0x00
vendor = 'Silicon Image Inc (Was: CMD Technology Inc)'
device = 'SiI 0680 (Was: PCI-0680) Ultra ATA133 EIDE Controller'
class = mass storage
subclass = ATA
none4 at pci11:13:0: class=0x030000 card=0x016d1028 chip=0x51591002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc.'
device = 'RV100 Radeon 7000 / Radeon VE'
class = display
subclass = VGA
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Wed May 25 16:05:31 IST 2005
root@:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3192.23-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147221504 (2047 MB)
avail memory = 2095763456 (1998 MB)
ACPI APIC Table: <DELL PE BKC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
amr0: <LSILogic MegaRAID 1.51> mem 0xdfdc0000-0xdfdfffff,0xd82f0000-0xd82fffff irq 46 at device 14.0 on pci2
amr0: <LSILogic PERC 4e/Di> Firmware 516A, BIOS H418, 256MB RAM
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
amr1: <LSILogic MegaRAID 1.51> mem 0xd81f0000-0xd81fffff irq 37 at device 11.0 on pci3
amr1: <LSILogic PERC 4/SC> Firmware 351N, BIOS 1.10, 64MB RAM
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xecc0-0xecff mem 0xdf9e0000-0xdf9fffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:11:43:de:08:54
em0: Speed:N/A Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdcc0-0xdcff mem 0xdf7e0000-0xdf7fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:11:43:de:08:55
em1: Speed:N/A Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib9
amr2: <LSILogic MegaRAID 1.51> mem 0xdf4c0000-0xdf4fffff,0xd80f0000-0xd80fffff irq 18 at device 14.0 on pci9
amr2: <LSILogic PERC 4e/DC> Firmware 521N, BIOS H430, 128MB RAM
pcib10: <PCI-PCI bridge> at device 0.2 on pci8
pci10: <PCI bus> on pcib10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <unknown> at device 5.0 (no driver attached)
pci11: <unknown> at device 5.1 (no driver attached)
pci11: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port 0xcc70-0xcc7f,0xccd0-0xccd3,0xccd8-0xccdf,0xcce4-0xcce7,0xccf0-0xccf7 irq 23 at device 6.0 on pci11
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pci11: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xd3800-0xd47ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
uhub3: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub3: 2 ports with 2 removable, self powered
Timecounters tick every 10.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4243N/A102> at ata0-master PIO4
ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE status=41<READY,ERROR> error=4<ABORTED>
ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=41<READY,ERROR> error=4<ABORTED>
acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave BIOSPIO
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 138720MB (284098560 sectors) RAID 0 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <PE/PV 1x6 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/amrd0s1a
More information about the freebsd-current
mailing list