FreeBSD 5.4 + DELL CERC SATA 1.5/6ch PCI card (Adaptec)
Muthu_T at Dell.com
Muthu_T at Dell.com
Wed May 18 05:00:26 PDT 2005
All,
Today I installed 5.4 on PE-SC1420 which has the following cards:
1. DELL CERC SATA 2S (on-board)
2. DELL CERC SATA 1.5/6ch PCI card
FreeBSD detects the on-board but not the PCI card.
I am attaching the 'pciconf -l -v' & dmesg output.
Could anybody give me the patch, so that I can try it here?
<snip>
ahd0 at pci2:12:0: class=0x010400 card=0x01681028 chip=0x80959005 rev=0x10
hdr=0x00
vendor = 'Adaptec Inc'
device = 'ASC-39320 HostRAID SCSI Controller'
class = mass storage
subclass = RAID
ahd1 at pci2:12:1: class=0x010400 card=0x01681028 chip=0x80959005 rev=0x10
hdr=0x00
vendor = 'Adaptec Inc'
device = 'ASC-39320 HostRAID SCSI Controller'
class = mass storage
subclass = RAID
em0 at pci3:12:0: class=0x020000 card=0x10028086 chip=0x10268086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = '82545GM Gigabit Ethernet Controller'
class = network
subclass = ethernet
aac0 at pci3:13:0: class=0x010400 card=0x02911028 chip=0x02859005 rev=0x01
hdr=0x00
vendor = 'Adaptec Inc'
device = 'AAC-RAID RAID Controller'
class = mass storage
subclass = RAID
</snip>
Last entry is the DELL CERC SATA 1.5/6ch PCI card (Adaptec).
Thanks.
--T. Muthu Mohan
-------------- next part --------------
hostb0 at pci0:0:0: class=0x060000 card=0x01731028 chip=0x35908086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Server Memory Controller Hub'
class = bridge
subclass = HOST-PCI
none0 at pci0:0:1: class=0xff0000 card=0x01731028 chip=0x35918086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub Error Reporting Registers'
pcib1 at pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory controller Hub PCI Express Port A0'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:3:0: class=0x060400 card=0x00000050 chip=0x35968086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory controller Hub PCI Express Port A1'
class = bridge
subclass = PCI-PCI
pcib5 at pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory controller Hub PCI Express Port B0'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x01731028 chip=0x24d28086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x01731028 chip=0x24d48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x01731028 chip=0x24d78086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'
class = serial bus
subclass = USB
uhci3 at pci0:29:3: class=0x0c0300 card=0x01731028 chip=0x24de8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4'
class = serial bus
subclass = USB
none1 at pci0:29:7: class=0x0c0320 card=0x01731028 chip=0x24dd8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB EHCI Controller'
class = serial bus
subclass = USB
pcib6 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER (ICH2/3/4/4-L/5/5R), 6300ESB Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x01731028 chip=0x24db8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
class = mass storage
subclass = ATA
atapci1 at pci0:31:2: class=0x01048f card=0x01731028 chip=0x24df8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801ER (ICH5R) SATA Controller'
class = mass storage
subclass = RAID
none2 at pci0:31:3: class=0x0c0500 card=0x01731028 chip=0x24d38086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) SMBus Controller'
class = serial bus
subclass = SMBus
pcib2 at pci1:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Bridge Hub A'
class = bridge
subclass = PCI-PCI
pcib3 at pci1:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Bridge Hub B'
class = bridge
subclass = PCI-PCI
ahd0 at pci2:12:0: class=0x010400 card=0x01681028 chip=0x80959005 rev=0x10 hdr=0x00
vendor = 'Adaptec Inc'
device = 'ASC-39320 HostRAID SCSI Controller'
class = mass storage
subclass = RAID
ahd1 at pci2:12:1: class=0x010400 card=0x01681028 chip=0x80959005 rev=0x10 hdr=0x00
vendor = 'Adaptec Inc'
device = 'ASC-39320 HostRAID SCSI Controller'
class = mass storage
subclass = RAID
em0 at pci3:12:0: class=0x020000 card=0x10028086 chip=0x10268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82545GM Gigabit Ethernet Controller'
class = network
subclass = ethernet
aac0 at pci3:13:0: class=0x010400 card=0x02911028 chip=0x02859005 rev=0x01 hdr=0x00
vendor = 'Adaptec Inc'
device = 'AAC-RAID RAID Controller'
class = mass storage
subclass = RAID
em1 at pci3:14:0: class=0x020000 card=0x01731028 chip=0x10268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82545GM Gigabit Ethernet Controller'
class = network
subclass = ethernet
none3 at pci6:13:0: class=0x030000 card=0x80081002 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies Inc.'
device = 'Rage XL PCI'
class = display
subclass = VGA
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Wed May 18 05:35:24 IST 2005
root@:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1072218112 (1022 MB)
avail memory = 1039691776 (991 MB)
ACPI APIC Table: <DELL PE1420 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
lapic0: Forcing LINT1 to edge trigger
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE1420 > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
ahd0: <Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter> port 0xd400-0xd4ff,0xd000-0xd0ff mem 0xdfdfc000-0xdfdfdfff irq 26 at device 12.0 on pci2
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter> port 0xdc00-0xdcff,0xd800-0xd8ff mem 0xdfdfe000-0xdfdfffff irq 27 at device 12.1 on pci2
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xcc80-0xccbf mem 0xdfbc0000-0xdfbdffff irq 53 at device 12.0 on pci3
em0: Ethernet address: 00:0e:0c:60:0b:a8
em0: Speed:N/A Duplex:N/A
aac0: <Dell CERC SATA RAID 2> mem 0xd8000000-0xdbffffff irq 49 at device 13.0 on pci3
aac0: Unknown processor 100MHz, 48MB cache memory, optional battery not installed
aac0: Kernel 4.1-0, Build 7028, S/N bc42ec
aac0: Supported Options=1097c<WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,ALARM>
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xccc0-0xccff mem 0xdfbe0000-0xdfbfffff irq 48 at device 14.0 on pci3
em1: Ethernet address: 00:0f:1f:9c:7d:fc
em1: Speed:N/A Duplex:N/A
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem 0xd8800-0xdbfff,0xd7800-0xd87ff,0xd6000-0xd77ff,0xd2000-0xd5fff,0xc8000-0xd1fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <SAMSUNG CD-ROM SC-148A/B403> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
Interrupt storm detected on "irq18: uhci2+"; throttling interrupt source
da0 at ahd0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LW DS09> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <SEAGATE ST336607LW DS09> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da2 at ahd0 bus 0 target 2 lun 0
da2: <SEAGATE ST336607LW DS09> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/da0s1a
More information about the freebsd-current
mailing list