burncd: FAILURE - WRITE_BIG ILLEGAL REQUEST

Jeremie Le Hen jeremie at le-hen.org
Sun Jul 24 10:19:29 GMT 2005 

Hi list,

sorry for the subject in caps.

I gave a try to the burncd(8) to write an ISO image, but it failed.
I checked the archives, but found nothing relevant.  My dmesg is
attached, I can give the verbose one upon request.  The line enclosed
in "**" is a kernel message.

%%%
    jarjarbinks:OpenBSD# burncd -vtds max raw OpenBSD37.iso
    adding type 0x00 file OpenBSD37.iso size 348578 KB 151762 blocks (0 padded)
    next writeable LBA 0
    CUE sheet:
    01 00 00 01 00 00 02 00
    01 01 01 00 00 00 04 00
    01 aa 01 01 00 21 2f 25
    addr = 150 size = 356943872 blocks = 151762
    writing from file OpenBSD37.iso size 348578 KB
    ** acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0 **
    
    Input/output error
%%%

Any idea, clue, explanation ?

Thanks.

Regards,
-- 
Jeremie Le Hen
< jeremie at le-hen dot org >< ttz at chchile dot org >
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #157: Sat Jul 23 04:11:36 CEST 2005
    root at jarjarbinks.tataz.chchile.org:/usr/src/sys/i386/compile/JARJARBINKS
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <INTEL  ALVISO  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 1072168960 (1022 MB)
avail memory = 1040314368 (992 MB)
    ACPI-0377: *** Info: Table [SSDT] replaced by host OS
    ACPI-0377: *** Info: Table [SSDT] replaced by host OS
    ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
    ACPI-0377: *** Info: Table [DSDT] replaced by host OS
ioapic1: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 15.15> irqs 24-23 on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci10: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: LegSup = 0x003b
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: LegSup = 0x0010
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: LegSup = 0x0010
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: LegSup = 0x0010
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib5
cbb0: <PCI-CardBus Bridge> mem 0xc8216000-0xc8216fff irq 18 at device 1.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci6: <serial bus, FireWire> at device 1.2 (no driver attached)
pci6: <mass storage> at device 1.3 (no driver attached)
pci6: <network> at device 3.0 (no driver attached)
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xc8200000-0xc820ffff irq 16 at device 8.0 on pci6
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:c0:9f:94:39:8f
bge0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 30.2 (no driver attached)
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcf7ff,0xe0000-0xe17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1729008890 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging unlimited
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: 76319MB <TOSHIBA MK8025GAS KA023A> at ata0-master UDMA33
acd0: DVDR <MATSHITAUJ-845D/D100> at ata0-slave UDMA33
Expensive timeout(9) function: 0xc05877b0(0xc22fa190) 0.003640406 s
cpu0: Cx states changed
Expensive timeout(9) function: 0xc05877b0(0xc22fa190) 0.022177958 s
Trying to mount root from ufs:/dev/ad0s1a
WARNING: /mnt/ufs.1 was not properly dismounted
WARNING: /mnt/ufs.4 was not properly dismounted
WARNING: /mnt/ufs.3 was not properly dismounted
WARNING: /mnt/ufs.2 was not properly dismounted
acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0
acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0
acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0

More information about the freebsd-current mailing list